this derivation will be built: /nix/store/6lws05cn2i1bz7zj8kijxvzw14rp5inv-vm-test-run-hermes-remote.drv building '/nix/store/6lws05cn2i1bz7zj8kijxvzw14rp5inv-vm-test-run-hermes-remote.drv' vm-test-run-hermes-remote> Machine state will be reset. To keep it, pass --keep-machine-state vm-test-run-hermes-remote> start all VLans vm-test-run-hermes-remote> (finished: start all VLans, in 0.00 seconds) vm-test-run-hermes-remote> Test will time out and terminate in 3600 seconds vm-test-run-hermes-remote> run the VM test script vm-test-run-hermes-remote> additionally exposed symbols: vm-test-run-hermes-remote> client, server, vm-test-run-hermes-remote> vlan1, vm-test-run-hermes-remote> start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh vm-test-run-hermes-remote> start all VMs vm-test-run-hermes-remote> client: starting vm vm-test-run-hermes-remote> server: starting vm vm-test-run-hermes-remote> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-hermes-remote> server # Formatting '/build/vm-state-server/tmp.HLCdjUvznz', fmt=raw size=25769803776 vm-test-run-hermes-remote> server # mke2fs 1.47.4 (6-Mar-2025) vm-test-run-hermes-remote> server # Discarding device blocks: 0/6291456 done vm-test-run-hermes-remote> server # Creating filesystem with 6291456 4k blocks and 1572864 inodes vm-test-run-hermes-remote> server # Filesystem UUID: 2075940e-f2ec-4768-b37a-cb7ac0b83102 vm-test-run-hermes-remote> server # Superblock backups stored on blocks: vm-test-run-hermes-remote> server # 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, vm-test-run-hermes-remote> server # 4096000 vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # Allocating group tables: 0/192 done vm-test-run-hermes-remote> server # Writing inode tables: 0/192 done vm-test-run-hermes-remote> server # Creating journal (32768 blocks): done vm-test-run-hermes-remote> server # Writing superblocks and filesystem accounting information: 0/192 done vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # Virtualisation disk image created. vm-test-run-hermes-remote> server: QEMU running (pid 47) vm-test-run-hermes-remote> client # Disk image does not exist, creating the virtualisation disk image... vm-test-run-hermes-remote> client # Formatting '/build/vm-state-client/tmp.1N2DKhgWym', fmt=raw size=1073741824 vm-test-run-hermes-remote> client # mke2fs 1.47.4 (6-Mar-2025) vm-test-run-hermes-remote> client # Discarding device blocks: 0/262144 done vm-test-run-hermes-remote> client # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-hermes-remote> client # Filesystem UUID: 9cd01443-b3a2-46d7-91ed-0dadfedc31a8 vm-test-run-hermes-remote> client # Superblock backups stored on blocks: vm-test-run-hermes-remote> client # 32768, 98304, 163840, 229376 vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # Allocating group tables: 0/8 done vm-test-run-hermes-remote> client # Writing inode tables: 0/8 done vm-test-run-hermes-remote> client # Creating journal (8192 blocks): done vm-test-run-hermes-remote> client # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # Virtualisation disk image created. vm-test-run-hermes-remote> client: QEMU running (pid 48) vm-test-run-hermes-remote> (finished: start all VMs, in 1.94 seconds) vm-test-run-hermes-remote> server: waiting for unit multi-user.target vm-test-run-hermes-remote> server: waiting for the VM to finish booting vm-test-run-hermes-remote> server # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-hermes-remote> client # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+BEFD1920+BEF31920 CA00 vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+7EFD1920+7EF31920 CA00 vm-test-run-hermes-remote> server # Press Ctrl-B to configure iPXE (PCI 00:03.0)... vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> client # Press Ctrl-B to configure iPXE (PCI 00:03.0)... vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> server # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM BEFD1920 BEF31920 CB00 vm-test-run-hermes-remote> client # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 7EFD1920 7EF31920 CB00 vm-test-run-hermes-remote> server # Press Ctrl-B to configure iPXE (PCI 00:09.0)... vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> client # Press Ctrl-B to configure iPXE (PCI 00:09.0)... vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> server # Booting from ROM... vm-test-run-hermes-remote> client # Booting from ROM... vm-test-run-hermes-remote> client # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.39 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 18 14:53:38 UTC 2026 vm-test-run-hermes-remote> client # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/kxgqba24hm9zmcfbfa9yylzph5rm9j6n-nixos-system-client-test/init regInfo=/nix/store/l923x80ywg47mjfq9s31j3g96rw7bxs4-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> client # [ 0.000000] BIOS-provided physical RAM map: vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdafff] usable vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x000000007ffdb000-0x000000007fffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] NX (Execute Disable) protection: active vm-test-run-hermes-remote> client # [ 0.000000] APIC: Static calls initialized vm-test-run-hermes-remote> client # [ 0.000000] SMBIOS 2.8 present. vm-test-run-hermes-remote> client # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 vm-test-run-hermes-remote> client # [ 0.000000] DMI: Memory slots populated: 1/1 vm-test-run-hermes-remote> client # [ 0.000000] Hypervisor detected: KVM vm-test-run-hermes-remote> client # [ 0.000000] last_pfn = 0x7ffdb max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 vm-test-run-hermes-remote> client # [ 0.000001] kvm-clock: using sched offset of 1230639955 cycles vm-test-run-hermes-remote> client # [ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-hermes-remote> client # [ 0.000008] tsc: Detected 4192.076 MHz processor vm-test-run-hermes-remote> client # [ 0.000683] last_pfn = 0x7ffdb max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.000733] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs vm-test-run-hermes-remote> client # [ 0.000737] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT vm-test-run-hermes-remote> client # [ 0.006843] found SMP MP-table at [mem 0x000f5470-0x000f547f] vm-test-run-hermes-remote> client # [ 0.006901] Using GB pages for direct mapping vm-test-run-hermes-remote> client # [ 0.007004] RAMDISK: [mem 0x7e3ad000-0x7ffcffff] vm-test-run-hermes-remote> client # [ 0.007022] ACPI: Early table checksum verification disabled vm-test-run-hermes-remote> client # [ 0.007028] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS ) vm-test-run-hermes-remote> client # [ 0.007034] ACPI: RSDT 0x000000007FFE2427 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.007040] ACPI: FACP 0x000000007FFE22D3 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.007049] ACPI: DSDT 0x000000007FFE0040 002293 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.007052] ACPI: FACS 0x000000007FFE0000 000040 vm-test-run-hermes-remote> client # [ 0.007053] ACPI: APIC 0x000000007FFE2347 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.007055] ACPI: HPET 0x000000007FFE23C7 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.007057] ACPI: WAET 0x000000007FFE23FF 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.007058] ACPI: Reserving FACP table memory at [mem 0x7ffe22d3-0x7ffe2346] vm-test-run-hermes-remote> client # [ 0.007059] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe22d2] vm-test-run-hermes-remote> client # [ 0.007060] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] vm-test-run-hermes-remote> client # [ 0.007060] ACPI: Reserving APIC table memory at [mem 0x7ffe2347-0x7ffe23c6] vm-test-run-hermes-remote> client # [ 0.007061] ACPI: Reserving HPET table memory at [mem 0x7ffe23c7-0x7ffe23fe] vm-test-run-hermes-remote> client # [ 0.007061] ACPI: Reserving WAET table memory at [mem 0x7ffe23ff-0x7ffe2426] vm-test-run-hermes-remote> client # [ 0.007587] No NUMA configuration found vm-test-run-hermes-remote> client # [ 0.007588] Faking a node at [mem 0x0000000000000000-0x000000007ffdafff] vm-test-run-hermes-remote> client # [ 0.007593] NODE_DATA(0) allocated [mem 0x7ffd5780-0x7ffdacff] vm-test-run-hermes-remote> client # [ 0.007703] Zone ranges: vm-test-run-hermes-remote> client # [ 0.007704] DMA [mem 0x0000000000001000-0x0000000000ffffff] vm-test-run-hermes-remote> client # [ 0.007705] DMA32 [mem 0x0000000001000000-0x000000007ffdafff] vm-test-run-hermes-remote> client # [ 0.007707] Normal empty vm-test-run-hermes-remote> client # [ 0.007708] Device empty vm-test-run-hermes-remote> client # [ 0.007708] Movable zone start for each node vm-test-run-hermes-remote> client # [ 0.007709] Early memory node ranges vm-test-run-hermes-remote> client # [ 0.007710] node 0: [mem 0x0000000000001000-0x000000000009efff] vm-test-run-hermes-remote> client # [ 0.007711] node 0: [mem 0x0000000000100000-0x000000007ffdafff] vm-test-run-hermes-remote> client # [ 0.007712] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffdafff] vm-test-run-hermes-remote> client # [ 0.007738] On node 0, zone DMA: 1 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.013085] On node 0, zone DMA: 97 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.202601] On node 0, zone DMA32: 37 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.203525] ACPI: PM-Timer IO Port: 0x608 vm-test-run-hermes-remote> client # [ 0.203546] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) vm-test-run-hermes-remote> client # [ 0.203582] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 vm-test-run-hermes-remote> client # [ 0.203585] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) vm-test-run-hermes-remote> client # [ 0.203587] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) vm-test-run-hermes-remote> client # [ 0.203589] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) vm-test-run-hermes-remote> client # [ 0.203590] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) vm-test-run-hermes-remote> client # [ 0.203591] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) vm-test-run-hermes-remote> server # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.39 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 18 14:53:38 UTC 2026 vm-test-run-hermes-remote> client # [ 0.203594] ACPI: Using ACPI (MADT) for SMP configuration information vm-test-run-hermes-remote> client # [ 0.203595] ACPI: HPET id: 0x8086a201 base: 0xfed00000 vm-test-run-hermes-remote> client # [ 0.203603] TSC deadline timer available vm-test-run-hermes-remote> client # [ 0.203609] CPU topo: Max. logical packages: 1 vm-test-run-hermes-remote> client # [ 0.203610] CPU topo: Max. logical dies: 1 vm-test-run-hermes-remote> client # [ 0.203610] CPU topo: Max. dies per package: 1 vm-test-run-hermes-remote> client # [ 0.203615] CPU topo: Max. threads per core: 1 vm-test-run-hermes-remote> client # [ 0.203616] CPU topo: Num. cores per package: 2 vm-test-run-hermes-remote> client # [ 0.203617] CPU topo: Num. threads per package: 2 vm-test-run-hermes-remote> client # [ 0.203618] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs vm-test-run-hermes-remote> client # [ 0.203641] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() vm-test-run-hermes-remote> client # [ 0.203662] kvm-guest: KVM setup pv remote TLB flush vm-test-run-hermes-remote> client # [ 0.203666] kvm-guest: setup PV sched yield vm-test-run-hermes-remote> client # [ 0.203687] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] vm-test-run-hermes-remote> server # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/dbcmc66xbdmq1395qzmbpj64mdl0bbl1-nixos-system-server-test/init regInfo=/nix/store/kbdlrahm3i2npv9xbbdggwcfm3gl53xw-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> server # [ 0.000000] BIOS-provided physical RAM map: vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-hermes-remote> client # [ 0.203689] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] vm-test-run-hermes-remote> client # [ 0.203692] [mem 0x80000000-0xfeffbfff] available for PCI devices vm-test-run-hermes-remote> client # [ 0.203693] Booting paravirtualized kernel on KVM vm-test-run-hermes-remote> client # [ 0.203699] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns vm-test-run-hermes-remote> client # [ 0.219970] setup_percpu: NR_CPUS:384 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 vm-test-run-hermes-remote> client # [ 0.222651] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u1048576 vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdafff] usable vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000bffdb000-0x00000000bfffffff] reserved vm-test-run-hermes-remote> client # [ 0.222727] kvm-guest: PV spinlocks enabled vm-test-run-hermes-remote> client # [ 0.222729] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) vm-test-run-hermes-remote> client # [ 0.222733] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/kxgqba24hm9zmcfbfa9yylzph5rm9j6n-nixos-system-client-test/init regInfo=/nix/store/l923x80ywg47mjfq9s31j3g96rw7bxs4-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable vm-test-run-hermes-remote> client # [ 0.229912] Unknown kernel command line parameters "regInfo=/nix/store/l923x80ywg47mjfq9s31j3g96rw7bxs4-closure-info/registration", will be passed to user space. vm-test-run-hermes-remote> client # [ 0.230113] random: crng init done vm-test-run-hermes-remote> client # [ 0.230116] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes vm-test-run-hermes-remote> client # [ 0.232477] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-hermes-remote> client # [ 0.239752] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved vm-test-run-hermes-remote> server # [ 0.000000] NX (Execute Disable) protection: active vm-test-run-hermes-remote> server # [ 0.000000] APIC: Static calls initialized vm-test-run-hermes-remote> client # [ 0.239861] Fallback order for Node 0: 0 vm-test-run-hermes-remote> client # [ 0.239867] Built 1 zonelists, mobility grouping on. Total pages: 524153 vm-test-run-hermes-remote> client # [ 0.239869] Policy zone: DMA32 vm-test-run-hermes-remote> client # [ 0.248679] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-hermes-remote> client # [ 0.270455] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-hermes-remote> client # [ 0.294010] allocated 4194304 bytes of page_ext vm-test-run-hermes-remote> client # [ 0.356592] ftrace: allocating 48593 entries in 192 pages vm-test-run-hermes-remote> client # [ 0.356599] ftrace: allocated 192 pages with 2 groups vm-test-run-hermes-remote> client # [ 0.357734] Dynamic Preempt: lazy vm-test-run-hermes-remote> client # [ 0.364075] rcu: Preemptible hierarchical RCU implementation. vm-test-run-hermes-remote> client # [ 0.364078] rcu: RCU event tracing is enabled. vm-test-run-hermes-remote> client # [ 0.364079] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.364082] Trampoline variant of Tasks RCU enabled. vm-test-run-hermes-remote> server # [ 0.000000] SMBIOS 2.8 present. vm-test-run-hermes-remote> server # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 vm-test-run-hermes-remote> client # [ 0.364083] Rude variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.364083] Tracing variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.364084] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. vm-test-run-hermes-remote> client # [ 0.364085] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-hermes-remote> client # [ 0.364109] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.364111] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.364112] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-hermes-remote> server # [ 0.000000] DMI: Memory slots populated: 1/1 vm-test-run-hermes-remote> server # [ 0.000000] Hypervisor detected: KVM vm-test-run-hermes-remote> server # [ 0.000000] last_pfn = 0xbffdb max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.377113] NR_IRQS: 24832, nr_irqs: 440, preallocated irqs: 16 vm-test-run-hermes-remote> client # [ 0.385166] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-hermes-remote> client # [ 0.385184] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns vm-test-run-hermes-remote> client # [ 0.385394] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-hermes-remote> client # [ 0.416629] Console: colour VGA+ 80x25 vm-test-run-hermes-remote> client # [ 0.416638] printk: legacy console [tty0] enabled vm-test-run-hermes-remote> client # [ 0.559737] printk: legacy console [ttyS0] enabled vm-test-run-hermes-remote> client # [ 0.912513] ACPI: Core revision 20250807 vm-test-run-hermes-remote> server # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 vm-test-run-hermes-remote> server # [ 0.000001] kvm-clock: using sched offset of 1412760734 cycles vm-test-run-hermes-remote> client # [ 0.913900] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns vm-test-run-hermes-remote> client # [ 0.916433] APIC: Switch to symmetric I/O mode setup vm-test-run-hermes-remote> client # [ 0.918878] x2apic enabled vm-test-run-hermes-remote> client # [ 0.919990] APIC: Switched APIC routing to: physical x2apic vm-test-run-hermes-remote> client # [ 0.921531] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() vm-test-run-hermes-remote> server # [ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-hermes-remote> server # [ 0.000007] tsc: Detected 4192.076 MHz processor vm-test-run-hermes-remote> server # [ 0.000798] last_pfn = 0x240000 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.923430] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() vm-test-run-hermes-remote> client # [ 0.926279] kvm-guest: setup PV IPIs vm-test-run-hermes-remote> client # [ 0.928687] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 vm-test-run-hermes-remote> client # [ 0.930760] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d2409b60, max_idle_ns: 440795393887 ns vm-test-run-hermes-remote> client # [ 0.933476] Calibrating delay loop (skipped) preset value.. 8384.15 BogoMIPS (lpj=4192076) vm-test-run-hermes-remote> server # [ 0.000842] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs vm-test-run-hermes-remote> server # [ 0.000845] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT vm-test-run-hermes-remote> client # [ 0.935468] x86/cpu: User Mode Instruction Prevention (UMIP) activated vm-test-run-hermes-remote> client # [ 0.935669] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 vm-test-run-hermes-remote> client # [ 0.936468] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 vm-test-run-hermes-remote> client # [ 0.937468] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto vm-test-run-hermes-remote> client # [ 0.937476] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl vm-test-run-hermes-remote> server # [ 0.000907] last_pfn = 0xbffdb max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> server # [ 0.002968] found SMP MP-table at [mem 0x000f5470-0x000f547f] vm-test-run-hermes-remote> server # [ 0.002992] Using GB pages for direct mapping vm-test-run-hermes-remote> client # [ 0.938468] Spectre V2 : Mitigation: Enhanced / Automatic IBRS vm-test-run-hermes-remote> client # [ 0.939468] Speculative Return Stack Overflow: Mitigation: Safe RET vm-test-run-hermes-remote> client # [ 0.940468] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization vm-test-run-hermes-remote> client # [ 0.940490] Spectre V2 : Enabling IBPB for BPF vm-test-run-hermes-remote> server # [ 0.003110] RAMDISK: [mem 0xbe3af000-0xbffcffff] vm-test-run-hermes-remote> server # [ 0.003118] ACPI: Early table checksum verification disabled vm-test-run-hermes-remote> server # [ 0.003122] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) vm-test-run-hermes-remote> client # [ 0.941468] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier vm-test-run-hermes-remote> client # [ 0.942476] active return thunk: srso_alias_return_thunk vm-test-run-hermes-remote> client # [ 0.943468] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' vm-test-run-hermes-remote> client # [ 0.943475] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' vm-test-run-hermes-remote> client # [ 0.944468] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' vm-test-run-hermes-remote> client # [ 0.944475] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' vm-test-run-hermes-remote> client # [ 0.945468] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' vm-test-run-hermes-remote> server # [ 0.003127] ACPI: RSDT 0x00000000BFFE24E3 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.946468] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' vm-test-run-hermes-remote> client # [ 0.946474] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' vm-test-run-hermes-remote> server # [ 0.003133] ACPI: FACP 0x00000000BFFE237F 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.947468] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' vm-test-run-hermes-remote> client # [ 0.947475] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' vm-test-run-hermes-remote> client # [ 0.948474] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 vm-test-run-hermes-remote> client # [ 0.949468] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 vm-test-run-hermes-remote> client # [ 0.949475] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 vm-test-run-hermes-remote> server # [ 0.003141] ACPI: DSDT 0x00000000BFFE0040 00233F (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.950468] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 vm-test-run-hermes-remote> client # [ 0.950474] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 vm-test-run-hermes-remote> server # [ 0.003143] ACPI: FACS 0x00000000BFFE0000 000040 vm-test-run-hermes-remote> client # [ 0.951468] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 vm-test-run-hermes-remote> client # [ 0.951476] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24 vm-test-run-hermes-remote> server # [ 0.003146] ACPI: APIC 0x00000000BFFE23F3 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.003148] ACPI: HPET 0x00000000BFFE2483 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.952468] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format. vm-test-run-hermes-remote> server # [ 0.003150] ACPI: WAET 0x00000000BFFE24BB 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.003152] ACPI: Reserving FACP table memory at [mem 0xbffe237f-0xbffe23f2] vm-test-run-hermes-remote> server # [ 0.003153] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe237e] vm-test-run-hermes-remote> server # [ 0.003154] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f] vm-test-run-hermes-remote> server # [ 0.003154] ACPI: Reserving APIC table memory at [mem 0xbffe23f3-0xbffe2482] vm-test-run-hermes-remote> server # [ 0.003155] ACPI: Reserving HPET table memory at [mem 0xbffe2483-0xbffe24ba] vm-test-run-hermes-remote> server # [ 0.003156] ACPI: Reserving WAET table memory at [mem 0xbffe24bb-0xbffe24e2] vm-test-run-hermes-remote> server # [ 0.003618] No NUMA configuration found vm-test-run-hermes-remote> server # [ 0.003619] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] vm-test-run-hermes-remote> server # [ 0.003623] NODE_DATA(0) allocated [mem 0x23fff8780-0x23fffdcff] vm-test-run-hermes-remote> server # [ 0.003733] Zone ranges: vm-test-run-hermes-remote> server # [ 0.003734] DMA [mem 0x0000000000001000-0x0000000000ffffff] vm-test-run-hermes-remote> client # [ 0.965378] Freeing SMP alternatives memory: 44K vm-test-run-hermes-remote> server # [ 0.003735] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] vm-test-run-hermes-remote> server # [ 0.003736] Normal [mem 0x0000000100000000-0x000000023fffffff] vm-test-run-hermes-remote> server # [ 0.003737] Device empty vm-test-run-hermes-remote> client # [ 0.965468] pid_max: default: 32768 minimum: 301 vm-test-run-hermes-remote> client # [ 0.965604] LSM: initializing lsm=capability,landlock,yama,bpf,ima vm-test-run-hermes-remote> client # [ 0.966468] landlock: Up and running. vm-test-run-hermes-remote> client # [ 0.966468] Yama: becoming mindful. vm-test-run-hermes-remote> client # [ 0.966778] LSM support for eBPF active vm-test-run-hermes-remote> client # [ 0.967468] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) vm-test-run-hermes-remote> client # [ 0.967524] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) vm-test-run-hermes-remote> server # [ 0.003738] Movable zone start for each node vm-test-run-hermes-remote> server # [ 0.003739] Early memory node ranges vm-test-run-hermes-remote> server # [ 0.003739] node 0: [mem 0x0000000000001000-0x000000000009efff] vm-test-run-hermes-remote> client # [ 0.969061] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2) vm-test-run-hermes-remote> client # [ 0.970129] Performance Events: Fam17h+ core perfctr, AMD PMU driver. vm-test-run-hermes-remote> client # [ 0.971476] ... version: 2 vm-test-run-hermes-remote> client # [ 0.972495] ... bit width: 48 vm-test-run-hermes-remote> client # [ 0.973473] ... generic counters: 6 vm-test-run-hermes-remote> client # [ 0.974474] ... generic bitmap: 000000000000003f vm-test-run-hermes-remote> client # [ 0.975474] ... fixed-purpose counters: 0 vm-test-run-hermes-remote> server # [ 0.003740] node 0: [mem 0x0000000000100000-0x00000000bffdafff] vm-test-run-hermes-remote> server # [ 0.003741] node 0: [mem 0x0000000100000000-0x000000023fffffff] vm-test-run-hermes-remote> client # [ 0.976473] ... fixed-purpose bitmap: 0000000000000000 vm-test-run-hermes-remote> client # [ 0.977473] ... value mask: 0000ffffffffffff vm-test-run-hermes-remote> client # [ 0.978473] ... max period: 00007fffffffffff vm-test-run-hermes-remote> client # [ 0.979474] ... global_ctrl mask: 000000000000003f vm-test-run-hermes-remote> client # [ 0.980645] signal: max sigframe size: 3376 vm-test-run-hermes-remote> client # [ 0.981712] rcu: Hierarchical SRCU implementation. vm-test-run-hermes-remote> server # [ 0.003743] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff] vm-test-run-hermes-remote> server # [ 0.003763] On node 0, zone DMA: 1 pages in unavailable ranges vm-test-run-hermes-remote> server # [ 0.004029] On node 0, zone DMA: 97 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.982479] rcu: Max phase no-delay instances is 400. vm-test-run-hermes-remote> client # [ 0.983716] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-hermes-remote> server # [ 0.151449] On node 0, zone Normal: 37 pages in unavailable ranges vm-test-run-hermes-remote> server # [ 0.152377] ACPI: PM-Timer IO Port: 0x608 vm-test-run-hermes-remote> server # [ 0.152399] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) vm-test-run-hermes-remote> client # [ 0.989130] smp: Bringing up secondary CPUs ... vm-test-run-hermes-remote> client # [ 0.990048] smpboot: x86: Booting SMP configuration: vm-test-run-hermes-remote> client # [ 0.990477] .... node #0, CPUs: #1 vm-test-run-hermes-remote> client # [ 0.992626] smp: Brought up 1 node, 2 CPUs vm-test-run-hermes-remote> server # [ 0.152435] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 vm-test-run-hermes-remote> server # [ 0.152438] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) vm-test-run-hermes-remote> client # [ 0.995290] smpboot: Total of 2 processors activated (16768.30 BogoMIPS) vm-test-run-hermes-remote> server # [ 0.152440] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) vm-test-run-hermes-remote> server # [ 0.152441] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) vm-test-run-hermes-remote> server # [ 0.152443] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) vm-test-run-hermes-remote> client # [ 0.998763] Memory: 1971152K/2096612K available (17150K kernel code, 2721K rwdata, 13544K rodata, 3640K init, 3012K bss, 115640K reserved, 0K cma-reserved) vm-test-run-hermes-remote> server # [ 0.152444] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) vm-test-run-hermes-remote> server # [ 0.152446] ACPI: Using ACPI (MADT) for SMP configuration information vm-test-run-hermes-remote> client # [ 1.000479] devtmpfs: initialized vm-test-run-hermes-remote> client # [ 1.001757] x86/mm: Memory block size: 128MB vm-test-run-hermes-remote> client # [ 1.003773] posixtimers hash table entries: 1024 (order: 2, 16384 bytes, linear) vm-test-run-hermes-remote> client # [ 1.005542] futex hash table entries: 512 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear). vm-test-run-hermes-remote> server # [ 0.152448] ACPI: HPET id: 0x8086a201 base: 0xfed00000 vm-test-run-hermes-remote> server # [ 0.152457] TSC deadline timer available vm-test-run-hermes-remote> server # [ 0.152463] CPU topo: Max. logical packages: 1 vm-test-run-hermes-remote> server # [ 0.152464] CPU topo: Max. logical dies: 1 vm-test-run-hermes-remote> client # [ 1.006652] pinctrl core: initialized pinctrl subsystem vm-test-run-hermes-remote> client # [ 1.007917] PM: RTC time: 14:20:23, date: 2026-07-31 vm-test-run-hermes-remote> server # [ 0.152465] CPU topo: Max. dies per package: 1 vm-test-run-hermes-remote> server # [ 0.152469] CPU topo: Max. threads per core: 1 vm-test-run-hermes-remote> server # [ 0.152470] CPU topo: Num. cores per package: 4 vm-test-run-hermes-remote> client # [ 1.013062] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-hermes-remote> server # [ 0.152471] CPU topo: Num. threads per package: 4 vm-test-run-hermes-remote> server # [ 0.152471] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs vm-test-run-hermes-remote> server # [ 0.152497] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() vm-test-run-hermes-remote> client # [ 1.014128] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations vm-test-run-hermes-remote> client # [ 1.015540] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-hermes-remote> server # [ 0.152527] kvm-guest: KVM setup pv remote TLB flush vm-test-run-hermes-remote> server # [ 0.152531] kvm-guest: setup PV sched yield vm-test-run-hermes-remote> client # [ 1.016812] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-hermes-remote> client # [ 1.017523] audit: initializing netlink subsys (disabled) vm-test-run-hermes-remote> server # [ 0.152554] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] vm-test-run-hermes-remote> server # [ 0.152556] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] vm-test-run-hermes-remote> client # [ 1.020230] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-hermes-remote> client # [ 1.020235] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-hermes-remote> client # [ 1.020468] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-hermes-remote> server # [ 0.152557] PM: hibernation: Registered nosave memory: [mem 0xbffdb000-0xffffffff] vm-test-run-hermes-remote> server # [ 0.152560] [mem 0xc0000000-0xfeffbfff] available for PCI devices vm-test-run-hermes-remote> server # [ 0.152562] Booting paravirtualized kernel on KVM vm-test-run-hermes-remote> client # [ 1.020468] thermal_sys: Registered thermal governor 'user_space' vm-test-run-hermes-remote> client # [ 1.020491] audit: type=2000 audit(1785507623.148:1): state=initialized audit_enabled=0 res=1 vm-test-run-hermes-remote> server # [ 0.152567] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns vm-test-run-hermes-remote> server # [ 0.156735] setup_percpu: NR_CPUS:384 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 vm-test-run-hermes-remote> client # [ 1.020468] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-hermes-remote> client # [ 1.023481] cpuidle: using governor menu vm-test-run-hermes-remote> server # [ 0.159100] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u524288 vm-test-run-hermes-remote> server # [ 0.159172] kvm-guest: PV spinlocks enabled vm-test-run-hermes-remote> server # [ 0.159174] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) vm-test-run-hermes-remote> client # [ 1.027604] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 vm-test-run-hermes-remote> client # [ 1.028468] PCI: Using configuration type 1 for base access vm-test-run-hermes-remote> server # [ 0.159178] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/dbcmc66xbdmq1395qzmbpj64mdl0bbl1-nixos-system-server-test/init regInfo=/nix/store/kbdlrahm3i2npv9xbbdggwcfm3gl53xw-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> client # [ 1.028476] PCI: Using configuration type 1 for extended access vm-test-run-hermes-remote> client # [ 1.033579] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. vm-test-run-hermes-remote> server # [ 0.159290] Unknown kernel command line parameters "regInfo=/nix/store/kbdlrahm3i2npv9xbbdggwcfm3gl53xw-closure-info/registration", will be passed to user space. vm-test-run-hermes-remote> server # [ 0.159485] random: crng init done vm-test-run-hermes-remote> server # [ 0.159486] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes vm-test-run-hermes-remote> server # [ 0.178734] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) vm-test-run-hermes-remote> server # [ 0.186283] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-hermes-remote> server # [ 0.186381] software IO TLB: area num 4. vm-test-run-hermes-remote> server # [ 0.345099] Fallback order for Node 0: 0 vm-test-run-hermes-remote> server # [ 0.345113] Built 1 zonelists, mobility grouping on. Total pages: 2097017 vm-test-run-hermes-remote> server # [ 0.345116] Policy zone: Normal vm-test-run-hermes-remote> server # [ 0.350993] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-hermes-remote> server # [ 0.387382] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 vm-test-run-hermes-remote> client # [ 1.045481] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> server # [ 0.442585] allocated 16777216 bytes of page_ext vm-test-run-hermes-remote> server # [ 0.483239] ftrace: allocating 48593 entries in 192 pages vm-test-run-hermes-remote> server # [ 0.483248] ftrace: allocated 192 pages with 2 groups vm-test-run-hermes-remote> client # [ 1.046477] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-hermes-remote> client # [ 1.047487] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> server # [ 0.484405] Dynamic Preempt: lazy vm-test-run-hermes-remote> server # [ 0.484648] rcu: Preemptible hierarchical RCU implementation. vm-test-run-hermes-remote> server # [ 0.484649] rcu: RCU event tracing is enabled. vm-test-run-hermes-remote> client # [ 1.048480] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-hermes-remote> server # [ 0.484650] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=4. vm-test-run-hermes-remote> server # [ 0.484653] Trampoline variant of Tasks RCU enabled. vm-test-run-hermes-remote> server # [ 0.484654] Rude variant of Tasks RCU enabled. vm-test-run-hermes-remote> server # [ 0.484654] Tracing variant of Tasks RCU enabled. vm-test-run-hermes-remote> server # [ 0.484655] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. vm-test-run-hermes-remote> server # [ 0.484656] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 vm-test-run-hermes-remote> server # [ 0.484686] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. vm-test-run-hermes-remote> server # [ 0.484688] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. vm-test-run-hermes-remote> server # [ 0.484690] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. vm-test-run-hermes-remote> server # [ 0.502315] NR_IRQS: 24832, nr_irqs: 456, preallocated irqs: 16 vm-test-run-hermes-remote> server # [ 0.503738] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-hermes-remote> client # [ 1.071127] ACPI: Added _OSI(Module Device) vm-test-run-hermes-remote> client # [ 1.071468] ACPI: Added _OSI(Processor Device) vm-test-run-hermes-remote> server # [ 0.503752] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns vm-test-run-hermes-remote> client # [ 1.071468] ACPI: Added _OSI(Processor Aggregator Device) vm-test-run-hermes-remote> server # [ 0.503973] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-hermes-remote> server # [ 0.522830] Console: colour VGA+ 80x25 vm-test-run-hermes-remote> server # [ 0.522839] printk: legacy console [tty0] enabled vm-test-run-hermes-remote> server # [ 0.651046] printk: legacy console [ttyS0] enabled vm-test-run-hermes-remote> client # [ 1.076468] ACPI: 1 ACPI AML tables successfully acquired and loaded vm-test-run-hermes-remote> server # [ 1.129467] ACPI: Core revision 20250807 vm-test-run-hermes-remote> client # [ 1.078795] ACPI: Interpreter enabled vm-test-run-hermes-remote> server # [ 1.133975] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns vm-test-run-hermes-remote> server # [ 1.139571] APIC: Switch to symmetric I/O mode setup vm-test-run-hermes-remote> client # [ 1.079468] ACPI: PM: (supports S0 S3 S4 S5) vm-test-run-hermes-remote> client # [ 1.080524] ACPI: Using IOAPIC for interrupt routing vm-test-run-hermes-remote> client # [ 1.082608] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug vm-test-run-hermes-remote> client # [ 1.083476] PCI: Using E820 reservations for host bridge windows vm-test-run-hermes-remote> client # [ 1.084752] ACPI: Enabled 2 GPEs in block 00 to 0F vm-test-run-hermes-remote> server # [ 1.141060] x2apic enabled vm-test-run-hermes-remote> server # [ 1.145198] APIC: Switched APIC routing to: physical x2apic vm-test-run-hermes-remote> server # [ 1.146767] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() vm-test-run-hermes-remote> server # [ 1.151776] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() vm-test-run-hermes-remote> server # [ 1.157197] kvm-guest: setup PV IPIs vm-test-run-hermes-remote> server # [ 1.159451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 vm-test-run-hermes-remote> client # [ 1.091986] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) vm-test-run-hermes-remote> server # [ 1.164015] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d2409b60, max_idle_ns: 440795393887 ns vm-test-run-hermes-remote> client # [ 1.092489] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] vm-test-run-hermes-remote> client # [ 1.094129] acpiphp: Slot [3] registered vm-test-run-hermes-remote> client # [ 1.094564] acpiphp: Slot [4] registered vm-test-run-hermes-remote> client # [ 1.095525] acpiphp: Slot [5] registered vm-test-run-hermes-remote> server # [ 1.169651] Calibrating delay loop (skipped) preset value.. 8384.15 BogoMIPS (lpj=4192076) vm-test-run-hermes-remote> server # [ 1.170773] x86/cpu: User Mode Instruction Prevention (UMIP) activated vm-test-run-hermes-remote> client # [ 1.096564] acpiphp: Slot [6] registered vm-test-run-hermes-remote> client # [ 1.097585] acpiphp: Slot [7] registered vm-test-run-hermes-remote> client # [ 1.098560] acpiphp: Slot [8] registered vm-test-run-hermes-remote> client # [ 1.099536] acpiphp: Slot [9] registered vm-test-run-hermes-remote> client # [ 1.100571] acpiphp: Slot [10] registered vm-test-run-hermes-remote> client # [ 1.101523] acpiphp: Slot [11] registered vm-test-run-hermes-remote> client # [ 1.102569] acpiphp: Slot [12] registered vm-test-run-hermes-remote> client # [ 1.103571] acpiphp: Slot [13] registered vm-test-run-hermes-remote> server # [ 1.171644] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 vm-test-run-hermes-remote> client # [ 1.104523] acpiphp: Slot [14] registered vm-test-run-hermes-remote> client # [ 1.106408] acpiphp: Slot [15] registered vm-test-run-hermes-remote> server # [ 1.172644] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 vm-test-run-hermes-remote> client # [ 1.107334] acpiphp: Slot [16] registered vm-test-run-hermes-remote> client # [ 1.108615] acpiphp: Slot [17] registered vm-test-run-hermes-remote> client # [ 1.109531] acpiphp: Slot [18] registered vm-test-run-hermes-remote> server # [ 1.172644] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto vm-test-run-hermes-remote> client # [ 1.111509] acpiphp: Slot [19] registered vm-test-run-hermes-remote> client # [ 1.112557] acpiphp: Slot [20] registered vm-test-run-hermes-remote> client # [ 1.113579] acpiphp: Slot [21] registered vm-test-run-hermes-remote> client # [ 1.114532] acpiphp: Slot [22] registered vm-test-run-hermes-remote> client # [ 1.115540] acpiphp: Slot [23] registered vm-test-run-hermes-remote> server # [ 1.172644] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl vm-test-run-hermes-remote> server # [ 1.172644] Spectre V2 : Mitigation: Enhanced / Automatic IBRS vm-test-run-hermes-remote> client # [ 1.116528] acpiphp: Slot [24] registered vm-test-run-hermes-remote> client # [ 1.117631] acpiphp: Slot [25] registered vm-test-run-hermes-remote> client # [ 1.118539] acpiphp: Slot [26] registered vm-test-run-hermes-remote> server # [ 1.172644] Speculative Return Stack Overflow: Mitigation: Safe RET vm-test-run-hermes-remote> server # [ 1.172644] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization vm-test-run-hermes-remote> client # [ 1.119528] acpiphp: Slot [27] registered vm-test-run-hermes-remote> client # [ 1.121439] acpiphp: Slot [28] registered vm-test-run-hermes-remote> client # [ 1.122337] acpiphp: Slot [29] registered vm-test-run-hermes-remote> client # [ 1.123586] acpiphp: Slot [30] registered vm-test-run-hermes-remote> server # [ 1.172644] Spectre V2 : Enabling IBPB for BPF vm-test-run-hermes-remote> server # [ 1.172644] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier vm-test-run-hermes-remote> client # [ 1.124523] acpiphp: Slot [31] registered vm-test-run-hermes-remote> server # [ 1.172644] active return thunk: srso_alias_return_thunk vm-test-run-hermes-remote> client # [ 1.126410] PCI host bridge to bus 0000:00 vm-test-run-hermes-remote> client # [ 1.127506] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 1.173644] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' vm-test-run-hermes-remote> server # [ 1.173650] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' vm-test-run-hermes-remote> client # [ 1.128478] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] vm-test-run-hermes-remote> client # [ 1.129491] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> server # [ 1.174644] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' vm-test-run-hermes-remote> server # [ 1.174649] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' vm-test-run-hermes-remote> server # [ 1.175644] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' vm-test-run-hermes-remote> server # [ 1.175649] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' vm-test-run-hermes-remote> client # [ 1.130478] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] vm-test-run-hermes-remote> client # [ 1.131494] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window] vm-test-run-hermes-remote> server # [ 1.176644] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' vm-test-run-hermes-remote> server # [ 1.176648] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' vm-test-run-hermes-remote> client # [ 1.132484] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-hermes-remote> server # [ 1.177644] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' vm-test-run-hermes-remote> client # [ 1.133857] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.178644] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 vm-test-run-hermes-remote> server # [ 1.178647] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 vm-test-run-hermes-remote> client # [ 1.135526] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.179644] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 vm-test-run-hermes-remote> server # [ 1.179644] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 vm-test-run-hermes-remote> client # [ 1.137511] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.179644] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 vm-test-run-hermes-remote> server # [ 1.179651] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 vm-test-run-hermes-remote> client # [ 1.140540] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef] vm-test-run-hermes-remote> server # [ 1.180644] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24 vm-test-run-hermes-remote> server # [ 1.180644] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format. vm-test-run-hermes-remote> client # [ 1.142557] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk vm-test-run-hermes-remote> client # [ 1.143486] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk vm-test-run-hermes-remote> client # [ 1.144488] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk vm-test-run-hermes-remote> client # [ 1.145478] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk vm-test-run-hermes-remote> client # [ 1.146977] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.148537] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f] vm-test-run-hermes-remote> client # [ 1.150919] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.152116] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI vm-test-run-hermes-remote> client # [ 1.153511] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB vm-test-run-hermes-remote> client # [ 1.155889] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.158576] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] vm-test-run-hermes-remote> client # [ 1.159500] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] vm-test-run-hermes-remote> client # [ 1.160525] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref] vm-test-run-hermes-remote> client # [ 1.161769] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] vm-test-run-hermes-remote> client # [ 1.163676] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.166488] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] vm-test-run-hermes-remote> client # [ 1.167486] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] vm-test-run-hermes-remote> client # [ 1.168522] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] vm-test-run-hermes-remote> server # [ 1.198644] Freeing SMP alternatives memory: 44K vm-test-run-hermes-remote> server # [ 1.198659] pid_max: default: 32768 minimum: 301 vm-test-run-hermes-remote> client # [ 1.169487] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] vm-test-run-hermes-remote> server # [ 1.199644] LSM: initializing lsm=capability,landlock,yama,bpf,ima vm-test-run-hermes-remote> server # [ 1.200644] landlock: Up and running. vm-test-run-hermes-remote> server # [ 1.200644] Yama: becoming mindful. vm-test-run-hermes-remote> client # [ 1.173797] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.176489] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f] vm-test-run-hermes-remote> server # [ 1.200644] LSM support for eBPF active vm-test-run-hermes-remote> server # [ 1.200988] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-hermes-remote> server # [ 1.201780] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-hermes-remote> client # [ 1.177487] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] vm-test-run-hermes-remote> client # [ 1.178522] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] vm-test-run-hermes-remote> server # [ 1.203978] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2) vm-test-run-hermes-remote> client # [ 1.182697] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.185488] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf] vm-test-run-hermes-remote> client # [ 1.186488] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] vm-test-run-hermes-remote> client # [ 1.187522] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] vm-test-run-hermes-remote> server # [ 1.205846] Performance Events: Fam17h+ core perfctr, AMD PMU driver. vm-test-run-hermes-remote> server # [ 1.206653] ... version: 2 vm-test-run-hermes-remote> client # [ 1.190722] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.207706] ... bit width: 48 vm-test-run-hermes-remote> server # [ 1.209530] ... generic counters: 6 vm-test-run-hermes-remote> client # [ 1.193499] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f] vm-test-run-hermes-remote> client # [ 1.194488] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] vm-test-run-hermes-remote> server # [ 1.210495] ... generic bitmap: 000000000000003f vm-test-run-hermes-remote> server # [ 1.211650] ... fixed-purpose counters: 0 vm-test-run-hermes-remote> client # [ 1.195522] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] vm-test-run-hermes-remote> server # [ 1.212650] ... fixed-purpose bitmap: 0000000000000000 vm-test-run-hermes-remote> server # [ 1.213649] ... value mask: 0000ffffffffffff vm-test-run-hermes-remote> client # [ 1.199653] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.203488] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f] vm-test-run-hermes-remote> server # [ 1.214649] ... max period: 00007fffffffffff vm-test-run-hermes-remote> server # [ 1.215654] ... global_ctrl mask: 000000000000003f vm-test-run-hermes-remote> server # [ 1.216807] signal: max sigframe size: 3376 vm-test-run-hermes-remote> client # [ 1.204487] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] vm-test-run-hermes-remote> client # [ 1.205521] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] vm-test-run-hermes-remote> client # [ 1.208510] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.217792] rcu: Hierarchical SRCU implementation. vm-test-run-hermes-remote> server # [ 1.219639] rcu: Max phase no-delay instances is 400. vm-test-run-hermes-remote> client # [ 1.211491] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f] vm-test-run-hermes-remote> server # [ 1.220931] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-hermes-remote> client # [ 1.212488] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] vm-test-run-hermes-remote> client # [ 1.214521] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] vm-test-run-hermes-remote> client # [ 1.218582] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.221489] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf] vm-test-run-hermes-remote> server # [ 1.228615] smp: Bringing up secondary CPUs ... vm-test-run-hermes-remote> client # [ 1.222486] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] vm-test-run-hermes-remote> client # [ 1.223544] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] vm-test-run-hermes-remote> client # [ 1.224486] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref] vm-test-run-hermes-remote> server # [ 1.230077] smpboot: x86: Booting SMP configuration: vm-test-run-hermes-remote> client # [ 1.227669] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.230500] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] vm-test-run-hermes-remote> client # [ 1.231520] pci 0000:00:0a.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] vm-test-run-hermes-remote> client # [ 1.235785] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.238496] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff] vm-test-run-hermes-remote> client # [ 1.239490] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] vm-test-run-hermes-remote> client # [ 1.240523] pci 0000:00:0b.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] vm-test-run-hermes-remote> server # [ 1.231654] .... node #0, CPUs: #1 #2 #3 vm-test-run-hermes-remote> server # [ 1.244892] smp: Brought up 1 node, 4 CPUs vm-test-run-hermes-remote> client # [ 1.243646] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.246505] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df] vm-test-run-hermes-remote> client # [ 1.247489] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff] vm-test-run-hermes-remote> server # [ 1.246651] smpboot: Total of 4 processors activated (33536.60 BogoMIPS) vm-test-run-hermes-remote> client # [ 1.248523] pci 0000:00:0c.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] vm-test-run-hermes-remote> client # [ 1.257793] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 vm-test-run-hermes-remote> client # [ 1.258691] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 vm-test-run-hermes-remote> client # [ 1.259667] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 vm-test-run-hermes-remote> client # [ 1.260679] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 vm-test-run-hermes-remote> client # [ 1.261581] ACPI: PCI: Interrupt link LNKS configured for IRQ 9 vm-test-run-hermes-remote> client # [ 1.264545] iommu: Default domain type: Translated vm-test-run-hermes-remote> client # [ 1.265468] iommu: DMA domain TLB invalidation policy: lazy mode vm-test-run-hermes-remote> client # [ 1.265843] ACPI: bus type USB registered vm-test-run-hermes-remote> client # [ 1.266468] usbcore: registered new interface driver usbfs vm-test-run-hermes-remote> client # [ 1.266468] usbcore: registered new interface driver hub vm-test-run-hermes-remote> server # [ 1.250953] Memory: 8074452K/8388068K available (17150K kernel code, 2721K rwdata, 13544K rodata, 3640K init, 3012K bss, 290272K reserved, 0K cma-reserved) vm-test-run-hermes-remote> client # [ 1.268555] usbcore: registered new device driver usb vm-test-run-hermes-remote> client # [ 1.270857] NetLabel: Initializing vm-test-run-hermes-remote> client # [ 1.272490] NetLabel: domain hash size = 128 vm-test-run-hermes-remote> client # [ 1.273477] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO vm-test-run-hermes-remote> server # [ 1.254654] devtmpfs: initialized vm-test-run-hermes-remote> server # [ 1.255871] x86/mm: Memory block size: 128MB vm-test-run-hermes-remote> client # [ 1.274627] NetLabel: unlabeled traffic allowed by default vm-test-run-hermes-remote> client # [ 1.276527] PCI: Using ACPI for IRQ routing vm-test-run-hermes-remote> server # [ 1.259718] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-hermes-remote> server # [ 1.260741] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear). vm-test-run-hermes-remote> server # [ 1.261839] pinctrl core: initialized pinctrl subsystem vm-test-run-hermes-remote> server # [ 1.263416] PM: RTC time: 14:20:24, date: 2026-07-31 vm-test-run-hermes-remote> client # [ 1.281667] pci 0000:00:02.0: vgaarb: setting as boot VGA device vm-test-run-hermes-remote> client # [ 1.282468] pci 0000:00:02.0: vgaarb: bridge control possible vm-test-run-hermes-remote> client # [ 1.282468] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vm-test-run-hermes-remote> client # [ 1.282497] vgaarb: loaded vm-test-run-hermes-remote> client # [ 1.283597] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 vm-test-run-hermes-remote> client # [ 1.284488] hpet0: 3 comparators, 64-bit 100.000000 MHz counter vm-test-run-hermes-remote> server # [ 1.284887] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-hermes-remote> server # [ 1.287875] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations vm-test-run-hermes-remote> client # [ 1.289839] clocksource: Switched to clocksource kvm-clock vm-test-run-hermes-remote> server # [ 1.288644] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-hermes-remote> client # [ 1.291761] VFS: Disk quotas dquot_6.6.0 vm-test-run-hermes-remote> client # [ 1.305146] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-hermes-remote> server # [ 1.291644] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-hermes-remote> server # [ 1.293718] audit: initializing netlink subsys (disabled) vm-test-run-hermes-remote> server # [ 1.296075] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-hermes-remote> server # [ 1.296077] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-hermes-remote> client # [ 1.318355] pnp: PnP ACPI init vm-test-run-hermes-remote> client # [ 1.320158] pnp: PnP ACPI: found 6 devices vm-test-run-hermes-remote> server # [ 1.295727] audit: type=2000 audit(1785507623.459:1): state=initialized audit_enabled=0 res=1 vm-test-run-hermes-remote> server # [ 1.297650] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-hermes-remote> server # [ 1.300654] thermal_sys: Registered thermal governor 'user_space' vm-test-run-hermes-remote> server # [ 1.301650] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-hermes-remote> server # [ 1.304656] cpuidle: using governor menu vm-test-run-hermes-remote> server # [ 1.307350] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 vm-test-run-hermes-remote> server # [ 1.308644] PCI: Using configuration type 1 for base access vm-test-run-hermes-remote> server # [ 1.308662] PCI: Using configuration type 1 for extended access vm-test-run-hermes-remote> client # [ 1.342863] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns vm-test-run-hermes-remote> server # [ 1.309737] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. vm-test-run-hermes-remote> client # [ 1.361259] clocksource: Switched to clocksource acpi_pm vm-test-run-hermes-remote> client # [ 1.362892] NET: Registered PF_INET protocol family vm-test-run-hermes-remote> client # [ 1.364585] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 1.324655] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> server # [ 1.325644] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-hermes-remote> server # [ 1.325644] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> server # [ 1.326644] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-hermes-remote> server # [ 1.337786] ACPI: Added _OSI(Module Device) vm-test-run-hermes-remote> server # [ 1.338644] ACPI: Added _OSI(Processor Device) vm-test-run-hermes-remote> server # [ 1.338644] ACPI: Added _OSI(Processor Aggregator Device) vm-test-run-hermes-remote> client # [ 1.405649] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) vm-test-run-hermes-remote> server # [ 1.340076] ACPI: 1 ACPI AML tables successfully acquired and loaded vm-test-run-hermes-remote> server # [ 1.343064] ACPI: Interpreter enabled vm-test-run-hermes-remote> server # [ 1.343644] ACPI: PM: (supports S0 S3 S4 S5) vm-test-run-hermes-remote> server # [ 1.343644] ACPI: Using IOAPIC for interrupt routing vm-test-run-hermes-remote> server # [ 1.344763] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug vm-test-run-hermes-remote> client # [ 1.412070] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 1.345650] PCI: Using E820 reservations for host bridge windows vm-test-run-hermes-remote> server # [ 1.346955] ACPI: Enabled 2 GPEs in block 00 to 0F vm-test-run-hermes-remote> client # [ 1.428199] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-hermes-remote> client # [ 1.442533] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) vm-test-run-hermes-remote> client # [ 1.445138] TCP: Hash tables configured (established 16384 bind 16384) vm-test-run-hermes-remote> server # [ 1.350644] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) vm-test-run-hermes-remote> client # [ 1.447015] MPTCP token hash table entries: 2048 (order: 4, 49152 bytes, linear) vm-test-run-hermes-remote> client # [ 1.449023] UDP hash table entries: 1024 (order: 4, 65536 bytes, linear) vm-test-run-hermes-remote> server # [ 1.352663] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] vm-test-run-hermes-remote> client # [ 1.450742] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes, linear) vm-test-run-hermes-remote> server # [ 1.354291] acpiphp: Slot [3] registered vm-test-run-hermes-remote> server # [ 1.355459] acpiphp: Slot [4] registered vm-test-run-hermes-remote> client # [ 1.453716] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-hermes-remote> client # [ 1.457243] NET: Registered PF_XDP protocol family vm-test-run-hermes-remote> server # [ 1.355644] acpiphp: Slot [5] registered vm-test-run-hermes-remote> server # [ 1.356687] acpiphp: Slot [6] registered vm-test-run-hermes-remote> server # [ 1.357644] acpiphp: Slot [7] registered vm-test-run-hermes-remote> client # [ 1.458609] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> client # [ 1.463224] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 1.357644] acpiphp: Slot [8] registered vm-test-run-hermes-remote> server # [ 1.358687] acpiphp: Slot [9] registered vm-test-run-hermes-remote> server # [ 1.359644] acpiphp: Slot [10] registered vm-test-run-hermes-remote> client # [ 1.464800] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> client # [ 1.469557] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window] vm-test-run-hermes-remote> server # [ 1.359644] acpiphp: Slot [11] registered vm-test-run-hermes-remote> server # [ 1.360685] acpiphp: Slot [12] registered vm-test-run-hermes-remote> client # [ 1.471264] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window] vm-test-run-hermes-remote> client # [ 1.476235] pci 0000:00:01.0: PIIX3: Enabling Passive Release vm-test-run-hermes-remote> server # [ 1.361644] acpiphp: Slot [13] registered vm-test-run-hermes-remote> server # [ 1.361644] acpiphp: Slot [14] registered vm-test-run-hermes-remote> server # [ 1.361698] acpiphp: Slot [15] registered vm-test-run-hermes-remote> client # [ 1.477772] pci 0000:00:00.0: Limiting direct PCI/PCI transfers vm-test-run-hermes-remote> client # [ 1.481207] ACPI: \_SB_.LNKD: Enabled at IRQ 11 vm-test-run-hermes-remote> server # [ 1.363687] acpiphp: Slot [16] registered vm-test-run-hermes-remote> server # [ 1.364686] acpiphp: Slot [17] registered vm-test-run-hermes-remote> server # [ 1.365644] acpiphp: Slot [18] registered vm-test-run-hermes-remote> client # [ 1.485079] PCI: CLS 0 bytes, default 64 vm-test-run-hermes-remote> server # [ 1.365644] acpiphp: Slot [19] registered vm-test-run-hermes-remote> server # [ 1.366688] acpiphp: Slot [20] registered vm-test-run-hermes-remote> server # [ 1.367644] acpiphp: Slot [21] registered vm-test-run-hermes-remote> server # [ 1.367644] acpiphp: Slot [22] registered vm-test-run-hermes-remote> server # [ 1.367685] acpiphp: Slot [23] registered vm-test-run-hermes-remote> client # [ 1.490635] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d2409b60, max_idle_ns: 440795393887 ns vm-test-run-hermes-remote> server # [ 1.368644] acpiphp: Slot [24] registered vm-test-run-hermes-remote> server # [ 1.370453] acpiphp: Slot [25] registered vm-test-run-hermes-remote> client # [ 1.493258] Trying to unpack rootfs image as initramfs... vm-test-run-hermes-remote> server # [ 1.370644] acpiphp: Slot [26] registered vm-test-run-hermes-remote> server # [ 1.371685] acpiphp: Slot [27] registered vm-test-run-hermes-remote> server # [ 1.372644] acpiphp: Slot [28] registered vm-test-run-hermes-remote> server # [ 1.372644] acpiphp: Slot [29] registered vm-test-run-hermes-remote> server # [ 1.373706] acpiphp: Slot [30] registered vm-test-run-hermes-remote> server # [ 1.374644] acpiphp: Slot [31] registered vm-test-run-hermes-remote> server # [ 1.374644] PCI host bridge to bus 0000:00 vm-test-run-hermes-remote> server # [ 1.375679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 1.376644] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 1.377651] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> server # [ 1.378644] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> server # [ 1.379651] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe007fffffff window] vm-test-run-hermes-remote> server # [ 1.381684] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-hermes-remote> server # [ 1.382644] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.384538] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.386496] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.388644] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef] vm-test-run-hermes-remote> server # [ 1.389706] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk vm-test-run-hermes-remote> server # [ 1.390650] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk vm-test-run-hermes-remote> server # [ 1.391657] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk vm-test-run-hermes-remote> server # [ 1.393644] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk vm-test-run-hermes-remote> client # [ 1.574463] Initialise system trusted keyrings vm-test-run-hermes-remote> server # [ 1.393644] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.396644] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f] vm-test-run-hermes-remote> client # [ 1.575946] workingset: timestamp_bits=40 max_order=19 bucket_order=0 vm-test-run-hermes-remote> server # [ 1.397382] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.399241] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI vm-test-run-hermes-remote> server # [ 1.400666] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB vm-test-run-hermes-remote> server # [ 1.402142] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.619418] Key type asymmetric registered vm-test-run-hermes-remote> server # [ 1.408644] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] vm-test-run-hermes-remote> server # [ 1.408675] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] vm-test-run-hermes-remote> server # [ 1.409644] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref] vm-test-run-hermes-remote> client # [ 1.620567] Asymmetric key parser 'x509' registered vm-test-run-hermes-remote> client # [ 1.627983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) vm-test-run-hermes-remote> client # [ 1.640220] io scheduler mq-deadline registered vm-test-run-hermes-remote> client # [ 1.641504] io scheduler kyber registered vm-test-run-hermes-remote> server # [ 1.410087] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] vm-test-run-hermes-remote> client # [ 1.653506] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-hermes-remote> client # [ 1.655597] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A vm-test-run-hermes-remote> server # [ 1.421196] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.424669] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] vm-test-run-hermes-remote> client # [ 1.658941] Linux agpgart interface v0.103 vm-test-run-hermes-remote> client # [ 1.666449] ACPI: bus type drm_connector registered vm-test-run-hermes-remote> server # [ 1.426666] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] vm-test-run-hermes-remote> server # [ 1.427698] pci 0000:00:03.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref] vm-test-run-hermes-remote> server # [ 1.428644] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] vm-test-run-hermes-remote> client # [ 1.678535] usbcore: registered new interface driver usbserial_generic vm-test-run-hermes-remote> client # [ 1.680342] usbserial: USB Serial support registered for generic vm-test-run-hermes-remote> server # [ 1.430644] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.684949] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. vm-test-run-hermes-remote> client # [ 1.684949] Please enable it if your BIOS has the CPPC option. vm-test-run-hermes-remote> server # [ 1.433665] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f] vm-test-run-hermes-remote> client # [ 1.694339] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled vm-test-run-hermes-remote> client # [ 1.705546] drop_monitor: Initializing network drop monitor service vm-test-run-hermes-remote> server # [ 1.434665] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] vm-test-run-hermes-remote> server # [ 1.435698] pci 0000:00:04.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref] vm-test-run-hermes-remote> server # [ 1.437644] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.707259] NET: Registered PF_INET6 protocol family vm-test-run-hermes-remote> server # [ 1.440667] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf] vm-test-run-hermes-remote> server # [ 1.441644] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] vm-test-run-hermes-remote> client # [ 1.719396] Segment Routing with IPv6 vm-test-run-hermes-remote> client # [ 1.720457] In-situ OAM (IOAM) with IPv6 vm-test-run-hermes-remote> server # [ 1.441644] pci 0000:00:05.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref] vm-test-run-hermes-remote> server # [ 1.443834] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.444663] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f] vm-test-run-hermes-remote> server # [ 1.445644] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] vm-test-run-hermes-remote> client # [ 1.729503] IPI shorthand broadcast: enabled vm-test-run-hermes-remote> server # [ 1.445644] pci 0000:00:06.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref] vm-test-run-hermes-remote> server # [ 1.448644] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.449664] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f] vm-test-run-hermes-remote> server # [ 1.450644] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] vm-test-run-hermes-remote> server # [ 1.450704] pci 0000:00:07.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref] vm-test-run-hermes-remote> client # [ 1.740746] sched_clock: Marking stable (1197027440, 543285391)->(2364163346, -623850515) vm-test-run-hermes-remote> server # [ 1.451644] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.454644] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f] vm-test-run-hermes-remote> server # [ 1.454665] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] vm-test-run-hermes-remote> server # [ 1.455644] pci 0000:00:08.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref] vm-test-run-hermes-remote> server # [ 1.456644] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.767582] registered taskstats version 1 vm-test-run-hermes-remote> client # [ 1.769054] Loading compiled-in X.509 certificates vm-test-run-hermes-remote> server # [ 1.461668] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf] vm-test-run-hermes-remote> server # [ 1.464669] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] vm-test-run-hermes-remote> server # [ 1.465644] pci 0000:00:09.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref] vm-test-run-hermes-remote> server # [ 1.467664] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref] vm-test-run-hermes-remote> server # [ 1.469644] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.470681] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] vm-test-run-hermes-remote> server # [ 1.471644] pci 0000:00:0a.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref] vm-test-run-hermes-remote> client # [ 1.808097] Demotion targets for Node 0: null vm-test-run-hermes-remote> client # [ 1.809642] Key type .fscrypt registered vm-test-run-hermes-remote> server # [ 1.472276] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 1.474644] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff] vm-test-run-hermes-remote> server # [ 1.474644] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] vm-test-run-hermes-remote> server # [ 1.474644] pci 0000:00:0b.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref] vm-test-run-hermes-remote> client # [ 1.810741] Key type fscrypt-provisioning registered vm-test-run-hermes-remote> client # [ 1.818424] ima: No TPM chip found, activating TPM-bypass! vm-test-run-hermes-remote> server # [ 1.476644] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 1.819838] ima: Allocated hash algorithm: sha1 vm-test-run-hermes-remote> client # [ 1.827230] ima: No architecture policies found vm-test-run-hermes-remote> server # [ 1.479664] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df] vm-test-run-hermes-remote> client # [ 1.828784] PM: Magic number: 2:94:335 vm-test-run-hermes-remote> client # [ 1.836021] tty tty56: hash matches vm-test-run-hermes-remote> server # [ 1.480644] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff] vm-test-run-hermes-remote> server # [ 1.483712] pci 0000:00:0c.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref] vm-test-run-hermes-remote> client # [ 1.844859] RAS: Correctable Errors collector initialized. vm-test-run-hermes-remote> server # [ 1.490030] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 vm-test-run-hermes-remote> server # [ 1.490644] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 vm-test-run-hermes-remote> server # [ 1.491857] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 vm-test-run-hermes-remote> server # [ 1.492644] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 vm-test-run-hermes-remote> server # [ 1.493644] ACPI: PCI: Interrupt link LNKS configured for IRQ 9 vm-test-run-hermes-remote> client # [ 1.864574] clk: Disabling unused clocks vm-test-run-hermes-remote> client # [ 1.871823] PM: genpd: Disabling unused power domains vm-test-run-hermes-remote> server # [ 1.494664] iommu: Default domain type: Translated vm-test-run-hermes-remote> server # [ 1.495644] iommu: DMA domain TLB invalidation policy: lazy mode vm-test-run-hermes-remote> server # [ 1.500028] ACPI: bus type USB registered vm-test-run-hermes-remote> server # [ 1.500644] usbcore: registered new interface driver usbfs vm-test-run-hermes-remote> server # [ 1.501681] usbcore: registered new interface driver hub vm-test-run-hermes-remote> server # [ 1.502644] usbcore: registered new device driver usb vm-test-run-hermes-remote> server # [ 1.504644] NetLabel: Initializing vm-test-run-hermes-remote> server # [ 1.504644] NetLabel: domain hash size = 128 vm-test-run-hermes-remote> server # [ 1.504649] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO vm-test-run-hermes-remote> server # [ 1.506756] NetLabel: unlabeled traffic allowed by default vm-test-run-hermes-remote> server # [ 1.507644] PCI: Using ACPI for IRQ routing vm-test-run-hermes-remote> server # [ 1.509188] pci 0000:00:02.0: vgaarb: setting as boot VGA device vm-test-run-hermes-remote> server # [ 1.509644] pci 0000:00:02.0: vgaarb: bridge control possible vm-test-run-hermes-remote> server # [ 1.509644] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vm-test-run-hermes-remote> server # [ 1.511660] vgaarb: loaded vm-test-run-hermes-remote> server # [ 1.514650] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 vm-test-run-hermes-remote> server # [ 1.515644] hpet0: 3 comparators, 64-bit 100.000000 MHz counter vm-test-run-hermes-remote> server # [ 1.520663] clocksource: Switched to clocksource kvm-clock vm-test-run-hermes-remote> server # [ 1.523030] VFS: Disk quotas dquot_6.6.0 vm-test-run-hermes-remote> server # [ 1.527140] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-hermes-remote> server # [ 1.564727] pnp: PnP ACPI init vm-test-run-hermes-remote> server # [ 1.566570] pnp: PnP ACPI: found 6 devices vm-test-run-hermes-remote> server # [ 1.586143] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns vm-test-run-hermes-remote> server # [ 1.624002] clocksource: Switched to clocksource acpi_pm vm-test-run-hermes-remote> server # [ 1.625609] NET: Registered PF_INET protocol family vm-test-run-hermes-remote> server # [ 1.638326] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) vm-test-run-hermes-remote> server # [ 1.703457] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) vm-test-run-hermes-remote> server # [ 1.715949] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 1.718031] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-hermes-remote> server # [ 1.723225] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) vm-test-run-hermes-remote> server # [ 1.731358] TCP: Hash tables configured (established 65536 bind 65536) vm-test-run-hermes-remote> server # [ 1.742395] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear) vm-test-run-hermes-remote> server # [ 1.744357] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 1.754477] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 1.763585] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-hermes-remote> server # [ 1.765142] NET: Registered PF_XDP protocol family vm-test-run-hermes-remote> server # [ 1.773473] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 1.775058] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 1.783687] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> server # [ 1.785418] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> server # [ 1.791298] pci_bus 0000:00: resource 8 [mem 0xe0000000000-0xe007fffffff window] vm-test-run-hermes-remote> server # [ 1.793243] pci 0000:00:01.0: PIIX3: Enabling Passive Release vm-test-run-hermes-remote> server # [ 1.794855] pci 0000:00:00.0: Limiting direct PCI/PCI transfers vm-test-run-hermes-remote> server # [ 1.801138] ACPI: \_SB_.LNKD: Enabled at IRQ 11 vm-test-run-hermes-remote> server # [ 1.811459] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x7c0 took 14689 usecs vm-test-run-hermes-remote> server # [ 1.821718] PCI: CLS 0 bytes, default 64 vm-test-run-hermes-remote> server # [ 1.822960] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) vm-test-run-hermes-remote> server # [ 1.824962] Trying to unpack rootfs image as initramfs... vm-test-run-hermes-remote> server # [ 1.836254] software IO TLB: mapped [mem 0x00000000ba3af000-0x00000000be3af000] (64MB) vm-test-run-hermes-remote> server # [ 1.842471] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d2409b60, max_idle_ns: 440795393887 ns vm-test-run-hermes-remote> client # [ 2.313592] Freeing initrd memory: 28812K vm-test-run-hermes-remote> client # [ 2.320230] Freeing unused decrypted memory: 2028K vm-test-run-hermes-remote> server # [ 1.901043] Initialise system trusted keyrings vm-test-run-hermes-remote> server # [ 1.906770] workingset: timestamp_bits=40 max_order=21 bucket_order=0 vm-test-run-hermes-remote> client # [ 2.330612] Freeing unused kernel image (initmem) memory: 3640K vm-test-run-hermes-remote> client # [ 2.338484] Write protecting the kernel read-only data: 32768k vm-test-run-hermes-remote> client # [ 2.348817] Freeing unused kernel image (text/rodata gap) memory: 1280K vm-test-run-hermes-remote> client # [ 2.354957] Freeing unused kernel image (rodata/data gap) memory: 792K vm-test-run-hermes-remote> server # [ 1.961770] Key type asymmetric registered vm-test-run-hermes-remote> server # [ 1.972086] Asymmetric key parser 'x509' registered vm-test-run-hermes-remote> server # [ 1.973481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) vm-test-run-hermes-remote> server # [ 1.986962] io scheduler mq-deadline registered vm-test-run-hermes-remote> server # [ 1.988116] io scheduler kyber registered vm-test-run-hermes-remote> server # [ 2.026352] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-hermes-remote> server # [ 2.028357] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A vm-test-run-hermes-remote> server # [ 2.039700] Linux agpgart interface v0.103 vm-test-run-hermes-remote> server # [ 2.040842] ACPI: bus type drm_connector registered vm-test-run-hermes-remote> server # [ 2.047393] usbcore: registered new interface driver usbserial_generic vm-test-run-hermes-remote> server # [ 2.049043] usbserial: USB Serial support registered for generic vm-test-run-hermes-remote> server # [ 2.050555] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. vm-test-run-hermes-remote> client # [ 2.478772] x86/mm: Checked W+X mappings: passed, no W+X pages found. vm-test-run-hermes-remote> client # [ 2.486596] Run /init as init process vm-test-run-hermes-remote> server # [ 2.050555] Please enable it if your BIOS has the CPPC option. vm-test-run-hermes-remote> server # [ 2.071063] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled vm-test-run-hermes-remote> server # [ 2.073171] drop_monitor: Initializing network drop monitor service vm-test-run-hermes-remote> server # [ 2.085248] NET: Registered PF_INET6 protocol family vm-test-run-hermes-remote> server # [ 2.104356] Segment Routing with IPv6 vm-test-run-hermes-remote> server # [ 2.105378] In-situ OAM (IOAM) with IPv6 vm-test-run-hermes-remote> client # [ 2.533579] systemd[1]: Inserted module 'autofs4' vm-test-run-hermes-remote> server # [ 2.123763] IPI shorthand broadcast: enabled vm-test-run-hermes-remote> server # [ 2.132812] sched_clock: Marking stable (1471027580, 660894022)->(3028843737, -896922135) vm-test-run-hermes-remote> server # [ 2.183410] registered taskstats version 1 vm-test-run-hermes-remote> server # [ 2.185255] Loading compiled-in X.509 certificates vm-test-run-hermes-remote> server # [ 2.224810] Demotion targets for Node 0: null vm-test-run-hermes-remote> server # [ 2.226742] Key type .fscrypt registered vm-test-run-hermes-remote> server # [ 2.227836] Key type fscrypt-provisioning registered vm-test-run-hermes-remote> server # [ 2.229346] ima: No TPM chip found, activating TPM-bypass! vm-test-run-hermes-remote> server # [ 2.244369] ima: Allocated hash algorithm: sha1 vm-test-run-hermes-remote> server # [ 2.245675] ima: No architecture policies found vm-test-run-hermes-remote> server # [ 2.254938] PM: Magic number: 2:94:335 vm-test-run-hermes-remote> server # [ 2.256166] tty tty56: hash matches vm-test-run-hermes-remote> server # [ 2.259003] RAS: Correctable Errors collector initialized. vm-test-run-hermes-remote> server # [ 2.291212] clk: Disabling unused clocks vm-test-run-hermes-remote> server # [ 2.292478] PM: genpd: Disabling unused power domains vm-test-run-hermes-remote> client # [ 2.881774] fuse: init (API version 7.45) vm-test-run-hermes-remote> client # [ 2.940436] ACPI: \_SB_.LNKC: Enabled at IRQ 10 vm-test-run-hermes-remote> client # [ 2.962569] ACPI: \_SB_.LNKA: Enabled at IRQ 10 vm-test-run-hermes-remote> client # [ 2.967390] ACPI: \_SB_.LNKB: Enabled at IRQ 11 vm-test-run-hermes-remote> client # [ 3.154747] systemd[1]: Successfully made /usr/ read-only. vm-test-run-hermes-remote> server # [ 2.780306] Freeing initrd memory: 28804K vm-test-run-hermes-remote> server # [ 2.791686] Freeing unused decrypted memory: 2028K vm-test-run-hermes-remote> server # [ 2.809159] Freeing unused kernel image (initmem) memory: 3640K vm-test-run-hermes-remote> server # [ 2.817714] Write protecting the kernel read-only data: 32768k vm-test-run-hermes-remote> server # [ 2.836778] Freeing unused kernel image (text/rodata gap) memory: 1280K vm-test-run-hermes-remote> server # [ 2.858676] Freeing unused kernel image (rodata/data gap) memory: 792K vm-test-run-hermes-remote> client # [ 3.494519] systemd[1]: systemd 261 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> client # [ 3.525365] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> client # [ 3.541878] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> server # [ 3.120142] x86/mm: Checked W+X mappings: passed, no W+X pages found. vm-test-run-hermes-remote> client # [ 3.543222] systemd[1]: Running in initrd. vm-test-run-hermes-remote> client # [ 3.557864] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> server # [ 3.121861] Run /init as init process vm-test-run-hermes-remote> client # [ 3.559688] systemd[1]: Hostname set to . vm-test-run-hermes-remote> server # [ 3.295862] systemd[1]: Inserted module 'autofs4' vm-test-run-hermes-remote> client # [ 4.171545] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> server # [ 3.781508] fuse: init (API version 7.45) vm-test-run-hermes-remote> client # [ 4.284776] systemd[1]: Queued start job for default target Initrd Default Target. vm-test-run-hermes-remote> server # [ 3.852019] ACPI: \_SB_.LNKC: Enabled at IRQ 10 vm-test-run-hermes-remote> server # [ 3.899316] ACPI: \_SB_.LNKA: Enabled at IRQ 10 vm-test-run-hermes-remote> server # [ 3.904562] ACPI: \_SB_.LNKB: Enabled at IRQ 11 vm-test-run-hermes-remote> client # [ 4.354270] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-hermes-remote> client # [ 4.356364] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 4.358414] systemd[1]: Expecting device /dev/disk/by-label/nixos... vm-test-run-hermes-remote> client # [ 4.363124] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> client # [ 4.364455] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> client # [ 4.365765] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> client # [ 4.408505] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> server # [ 3.989940] systemd[1]: Successfully made /usr/ read-only. vm-test-run-hermes-remote> client # [ 4.410118] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 4.419153] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-hermes-remote> client # [ 4.420942] systemd[1]: Listening on Journal Sockets. vm-test-run-hermes-remote> client # [ 4.428604] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> client # [ 4.436229] systemd[1]: Listening on udev Kernel Socket. vm-test-run-hermes-remote> client # [ 4.437698] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> client # [ 4.450141] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> client # [ 4.466430] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-hermes-remote> client # [ 4.490422] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> client # [ 4.514170] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> client # [ 4.548073] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> client # [ 4.591060] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 4.747428] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 4.340714] systemd[1]: systemd 261 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> server # [ 4.420856] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> server # [ 4.422247] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> server # [ 4.423531] systemd[1]: Running in initrd. vm-test-run-hermes-remote> server # [ 4.441221] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> server # [ 4.442855] systemd[1]: Hostname set to . vm-test-run-hermes-remote> client # [ 4.961971] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 4.961999] systemd-journald[76]: Collecting audit messages is disabled. vm-test-run-hermes-remote> client # [ 4.971593] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 5.004342] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> client # [ 5.010283] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config vm-test-run-hermes-remote> client # [ 5.033434] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> client # [ 5.078710] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. vm-test-run-hermes-remote> client # [ 5.097729] netfs: FS-Cache loaded vm-test-run-hermes-remote> client # [ 5.112193] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> client # [ 5.121346] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev vm-test-run-hermes-remote> client # [ 5.150551] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> client # [ 5.156659] 9pnet: Installing 9P2000 support vm-test-run-hermes-remote> client # [ 5.190813] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> client # [ 5.202423] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 4.672552] systemd-modules-load[77]: Using 2 probe threads vm-test-run-hermes-remote> client # [ 4.678682] systemd-modules-load[77]: Inserted module 'virtio_balloon' vm-test-run-hermes-remote> client # [ 5.227780] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-hermes-remote> client # [ 4.690218] systemd-modules-load[77]: Inserted module 'dm_mod' vm-test-run-hermes-remote> client # [ 4.691943] systemd-modules-load[77]: Inserted module 'virtio_gpu' vm-test-run-hermes-remote> client # [ 5.241106] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> client # [ 4.708260] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 4.716904] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> client # [ 4.718950] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> client # [ 4.725176] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> client # [ 4.737097] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 4.754957] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> client # [ 4.782126] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 4.795933] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> client # [ 4.802142] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> client # [ 4.830228] systemd-udevd[91]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> client # [ 4.866389] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> client # [ 4.868781] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> client # [ 4.874385] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 5.324740] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> server # [ 5.472172] systemd[1]: Queued start job for default target Initrd Default Target. vm-test-run-hermes-remote> server # [ 5.563992] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-hermes-remote> server # [ 5.566151] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 5.568275] systemd[1]: Expecting device /dev/disk/by-label/nixos... vm-test-run-hermes-remote> server # [ 5.570042] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> server # [ 5.571395] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> server # [ 5.576013] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> server # [ 5.577287] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> server # [ 5.582044] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 5.584072] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-hermes-remote> server # [ 5.588969] systemd[1]: Listening on Journal Sockets. vm-test-run-hermes-remote> server # [ 5.590841] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 5.595557] systemd[1]: Listening on udev Kernel Socket. vm-test-run-hermes-remote> server # [ 5.600229] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> server # [ 5.611820] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 5.630943] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-hermes-remote> server # [ 5.645761] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 5.703427] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 5.713000] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> server # [ 5.714497] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 5.728955] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 5.747352] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 5.766053] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 5.790100] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 5.817034] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config vm-test-run-hermes-remote> server # [ 5.851087] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> client # [ 6.280162] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 vm-test-run-hermes-remote> client # [ 6.317272] serio: i8042 KBD port at 0x60,0x64 irq 1 vm-test-run-hermes-remote> client # [ 6.318385] serio: i8042 AUX port at 0x60,0x64 irq 12 vm-test-run-hermes-remote> server # [ 5.938318] systemd-journald[92]: Collecting audit messages is disabled. vm-test-run-hermes-remote> client # [ 6.395298] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-hermes-remote> client # [ 6.462911] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-hermes-remote> client # [ 5.933750] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 6.061781] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> server # [ 5.403944] systemd-modules-load[94]: Using 4 probe threads vm-test-run-hermes-remote> server # [ 5.442255] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 5.460325] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> client # [ 6.031473] systemd-vconsole-setup[114]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> server # [ 5.511895] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 6.049840] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 5.542510] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 6.630878] SCSI subsystem initialized vm-test-run-hermes-remote> server # [ 5.545854] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 5.547919] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> server # [ 5.552904] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 6.641081] uhci_hcd 0000:00:01.2: UHCI Host Controller vm-test-run-hermes-remote> client # [ 6.673400] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 vm-test-run-hermes-remote> client # [ 6.684385] uhci_hcd 0000:00:01.2: detected 2 ports vm-test-run-hermes-remote> client # [ 6.685854] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100 vm-test-run-hermes-remote> client # [ 6.705451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> client # [ 6.706920] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 6.725717] usb usb1: Product: UHCI Host Controller vm-test-run-hermes-remote> client # [ 6.732889] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 vm-test-run-hermes-remote> client # [ 6.736452] usb usb1: Manufacturer: Linux 6.18.39 uhci_hcd vm-test-run-hermes-remote> client # [ 6.737651] usb usb1: SerialNumber: 0000:00:01.2 vm-test-run-hermes-remote> client # [ 6.738961] hub 1-0:1.0: USB hub found vm-test-run-hermes-remote> client # [ 6.218589] (udev-worker)[109]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> client # [ 6.227826] (udev-worker)[109]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 6.232824] (udev-worker)[102]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 6.802102] hub 1-0:1.0: 2 ports detected vm-test-run-hermes-remote> server # [ 5.753358] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 5.759898] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> client # [ 6.407344] systemd[1]: Found device /dev/disk/by-label/nixos. vm-test-run-hermes-remote> client # [ 6.408971] systemd[1]: Reached target Initrd Root Device. vm-test-run-hermes-remote> client # [ 6.429528] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... vm-test-run-hermes-remote> client # [ 6.976181] scsi host0: ata_piix vm-test-run-hermes-remote> client # [ 6.992147] scsi host1: ata_piix vm-test-run-hermes-remote> client # [ 6.993044] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0 vm-test-run-hermes-remote> client # [ 7.001979] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0 vm-test-run-hermes-remote> client # [ 7.042126] usb 1-1: new full-speed USB device number 2 using uhci_hcd vm-test-run-hermes-remote> server # [ 5.974157] systemd-udevd[110]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> client # [ 6.530977] systemd-fsck[128]: nixos: clean, 12/65536 files, 13019/262144 blocks vm-test-run-hermes-remote> server # [ 6.070719] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> client # [ 7.172301] ata2: found unknown device (class 0) vm-test-run-hermes-remote> client # [ 7.174040] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 vm-test-run-hermes-remote> client # [ 7.178605] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 vm-test-run-hermes-remote> client # [ 6.672595] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. vm-test-run-hermes-remote> client # [ 6.703902] systemd[1]: Mounting /sysroot... vm-test-run-hermes-remote> client # [ 7.335270] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 vm-test-run-hermes-remote> client # [ 7.336809] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 vm-test-run-hermes-remote> client # [ 7.400275] usb 1-1: Product: QEMU USB Tablet vm-test-run-hermes-remote> client # [ 7.417043] usb 1-1: Manufacturer: QEMU vm-test-run-hermes-remote> client # [ 7.417875] usb 1-1: SerialNumber: 28754-0000:00:01.2-1 vm-test-run-hermes-remote> client # [ 7.759849] hid: raw HID events driver (C) Jiri Kosina vm-test-run-hermes-remote> client # [ 7.779402] usbcore: registered new interface driver usbhid vm-test-run-hermes-remote> client # [ 7.780547] usbhid: USB HID core driver vm-test-run-hermes-remote> client # [ 7.783203] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray vm-test-run-hermes-remote> client # [ 7.797757] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 vm-test-run-hermes-remote> client # [ 7.802292] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0 vm-test-run-hermes-remote> client # [ 7.826796] cdrom: Uniform CD-ROM driver Revision: 3.20 vm-test-run-hermes-remote> client # [ 8.302689] EXT4-fs (vda): mounted filesystem 9cd01443-b3a2-46d7-91ed-0dadfedc31a8 r/w with ordered data mode. Quota mode: none. vm-test-run-hermes-remote> client # [ 7.778292] systemd[1]: Mounted /sysroot. vm-test-run-hermes-remote> client # [ 7.779334] systemd[1]: Reached target Initrd Root File System. vm-test-run-hermes-remote> client # [ 7.830892] systemd[1]: Mounting /sysroot/nix/.ro-store... vm-test-run-hermes-remote> client # [ 7.837974] systemd[1]: Mounting /sysroot/nix/.rw-store... vm-test-run-hermes-remote> client # [ 7.849933] systemd[1]: Mounting /sysroot/run... vm-test-run-hermes-remote> client # [ 7.865669] systemd[1]: Mounting /sysroot/tmp/shared... vm-test-run-hermes-remote> client # [ 7.906236] systemd[1]: Mounting /sysroot/tmp/xchg... vm-test-run-hermes-remote> client # [ 7.930323] systemd[1]: Starting Mountpoints Configured in the Real Root... vm-test-run-hermes-remote> client # [ 7.979614] systemd-sysroot-fstab-check[144]: /sysroot should be mounted in the initrd, will request daemon-reload. vm-test-run-hermes-remote> client # [ 8.026963] systemd[1]: Mounted /sysroot/nix/.rw-store. vm-test-run-hermes-remote> client # [ 8.043600] systemd[1]: Mounted /sysroot/run. vm-test-run-hermes-remote> client # [ 8.598605] 9p: Installing v9fs 9p2000 file system support vm-test-run-hermes-remote> client # [ 8.072388] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> client # [ 8.086239] systemd[1]: Reload requested from client PID 144 ('systemd-sysroot') (unit initrd-parse-etc.service)... vm-test-run-hermes-remote> client # [ 8.088437] systemd[1]: Reloading... vm-test-run-hermes-remote> client # [ 8.276396] systemd[1]: Reloading finished in 201 ms. vm-test-run-hermes-remote> client # [ 8.304108] systemd-sysroot-fstab-check[144]: Requesting initrd-fs.target/start/replace... vm-test-run-hermes-remote> client # [ 8.308420] systemd[1]: Mounted /sysroot/nix/.ro-store. vm-test-run-hermes-remote> client # [ 8.310350] systemd[1]: Mounted /sysroot/tmp/shared. vm-test-run-hermes-remote> client # [ 8.311819] systemd[1]: Mounted /sysroot/tmp/xchg. vm-test-run-hermes-remote> client # [ 8.316837] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 8.322155] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> client # [ 8.358137] systemd-sysroot-fstab-check[144]: Requesting swap.target/start/replace... vm-test-run-hermes-remote> client # [ 8.378986] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> client # [ 8.386243] systemd[1]: initrd-parse-etc.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 8.404865] systemd[1]: Finished Mountpoints Configured in the Real Root. vm-test-run-hermes-remote> client # [ 8.411276] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. vm-test-run-hermes-remote> client # [ 8.417095] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 7.879807] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 8.423940] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> client # [ 8.449855] systemd[1]: Mounting /sysroot/nix/store... vm-test-run-hermes-remote> server # [ 7.950316] systemd-vconsole-setup[140]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> server # [ 7.959191] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> client # [ 8.626692] systemd[1]: Mounted /sysroot/nix/store. vm-test-run-hermes-remote> client # [ 8.629215] systemd[1]: Reached target Initrd File Systems. vm-test-run-hermes-remote> client # [ 8.632079] systemd[1]: Starting Find NixOS closure... vm-test-run-hermes-remote> client # [ 8.657641] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-hermes-remote> client # [ 8.736170] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> client # [ 8.748409] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. vm-test-run-hermes-remote> client # [ 8.776087] systemd[1]: Finished Find NixOS closure. vm-test-run-hermes-remote> client # [ 8.784281] systemd[1]: Reached target Initrd Default Target. vm-test-run-hermes-remote> client # [ 8.794313] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-hermes-remote> client # [ 8.876132] systemd[1]: Stopped target Initrd Default Target. vm-test-run-hermes-remote> client # [ 8.899651] systemd[1]: Stopped target Basic System. vm-test-run-hermes-remote> client # [ 8.934223] systemd[1]: Stopped target Initrd Root Device. vm-test-run-hermes-remote> client # [ 8.959380] systemd[1]: Stopped target Path Units. vm-test-run-hermes-remote> client # [ 8.990241] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. vm-test-run-hermes-remote> client # [ 8.993972] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 9.000954] systemd[1]: Stopped target Slice Units. vm-test-run-hermes-remote> client # [ 9.006043] systemd[1]: Stopped target Socket Units. vm-test-run-hermes-remote> client # [ 9.023136] systemd[1]: Stopped target System Initialization. vm-test-run-hermes-remote> client # [ 9.027277] systemd[1]: Stopped target Swaps. vm-test-run-hermes-remote> client # [ 9.032399] systemd[1]: Stopped target Timer Units. vm-test-run-hermes-remote> client # [ 9.038143] systemd[1]: dbus.socket: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.046910] systemd[1]: Closed D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 9.050984] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.057945] systemd[1]: Stopped Find NixOS closure. vm-test-run-hermes-remote> client # [ 9.068224] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio vm-test-run-hermes-remote> client # [ 9.076258] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> client # [ 9.085982] systemd[1]: systemd-sysctl.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.090143] systemd[1]: Stopped Apply Kernel Variables. vm-test-run-hermes-remote> client # [ 9.091293] systemd[1]: systemd-modules-load.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.095814] systemd[1]: Stopped Load Kernel Modules. vm-test-run-hermes-remote> client # [ 9.096977] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.101818] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> client # [ 9.103404] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.111122] systemd[1]: Stopped Create System Files and Directories. vm-test-run-hermes-remote> client # [ 9.112475] systemd[1]: Stopped target Local File Systems. vm-test-run-hermes-remote> client # [ 9.119831] systemd[1]: Stopped target Preparation for Local File Systems. vm-test-run-hermes-remote> client # [ 9.121278] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.128153] systemd[1]: Stopped Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 9.129565] systemd[1]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> client # [ 9.137195] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.140259] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> client # [ 9.141592] systemd[1]: initrd-cleanup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.146064] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. vm-test-run-hermes-remote> client # [ 9.147453] systemd[1]: systemd-udevd.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.154976] systemd[1]: Stopped Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> client # [ 9.156517] systemd[1]: systemd-udevd.service: Consumed 1.279s CPU time over 4.327s wall clock time, 21.9M memory peak. vm-test-run-hermes-remote> client # [ 9.164773] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.172346] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> client # [ 9.173741] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.181338] systemd[1]: Closed udev Control Socket. vm-test-run-hermes-remote> client # [ 9.182439] systemd[1]: Starting Cleanup udev Database... vm-test-run-hermes-remote> client # [ 9.183594] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.191261] systemd[1]: Stopped Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 9.192588] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.201479] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> client # [ 9.204506] systemd[1]: kmod-static-nodes.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.226180] systemd[1]: Stopped Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 9.228033] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 9.230930] systemd[1]: Finished Cleanup udev Database. vm-test-run-hermes-remote> client # [ 9.234111] systemd[1]: Reached target Switch Root. vm-test-run-hermes-remote> client # [ 9.236267] systemd[1]: Starting NixOS Activation... vm-test-run-hermes-remote> server # [ 9.548017] netfs: FS-Cache loaded vm-test-run-hermes-remote> server # [ 9.039492] systemd-modules-load[94]: Inserted module 'virtio_balloon' vm-test-run-hermes-remote> client # [ 9.728256] initrd-nixos-activation-start[205]: booting system configuration /nix/store/kxgqba24hm9zmcfbfa9yylzph5rm9j6n-nixos-system-client-test vm-test-run-hermes-remote> server # [ 9.956205] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. vm-test-run-hermes-remote> server # [ 9.971102] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev vm-test-run-hermes-remote> server # [ 10.329518] virtio_blk virtio5: 4/0/0 default/read/poll queues vm-test-run-hermes-remote> server # [ 10.348801] virtio_blk virtio5: [vda] 50331648 512-byte logical blocks (25.8 GB/24.0 GiB) vm-test-run-hermes-remote> client # [ 10.255609] initrd-nixos-activation-start[205]: running activation script... vm-test-run-hermes-remote> server # [ 10.146191] systemd-modules-load[94]: Inserted module 'virtio_gpu' vm-test-run-hermes-remote> server # [ 10.821126] uhci_hcd 0000:00:01.2: UHCI Host Controller vm-test-run-hermes-remote> server # [ 10.825208] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 vm-test-run-hermes-remote> server # [ 10.829704] uhci_hcd 0000:00:01.2: detected 2 ports vm-test-run-hermes-remote> server # [ 10.830860] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100 vm-test-run-hermes-remote> server # [ 10.832774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> server # [ 10.834675] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> server # [ 10.836151] usb usb1: Product: UHCI Host Controller vm-test-run-hermes-remote> server # [ 10.837156] usb usb1: Manufacturer: Linux 6.18.39 uhci_hcd vm-test-run-hermes-remote> server # [ 10.846696] usb usb1: SerialNumber: 0000:00:01.2 vm-test-run-hermes-remote> server # [ 10.848164] hub 1-0:1.0: USB hub found vm-test-run-hermes-remote> server # [ 10.849039] hub 1-0:1.0: 2 ports detected vm-test-run-hermes-remote> server # [ 11.101845] usb 1-1: new full-speed USB device number 2 using uhci_hcd vm-test-run-hermes-remote> server # [ 11.300304] 9pnet: Installing 9P2000 support vm-test-run-hermes-remote> server # [ 10.658199] systemd-modules-load[94]: Inserted module 'dm_mod' vm-test-run-hermes-remote> server # [ 10.675283] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 11.343742] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 vm-test-run-hermes-remote> server # [ 11.345333] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 vm-test-run-hermes-remote> server # [ 11.355815] usb 1-1: Product: QEMU USB Tablet vm-test-run-hermes-remote> server # [ 10.696208] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 11.368748] usb 1-1: Manufacturer: QEMU vm-test-run-hermes-remote> server # [ 11.369607] usb 1-1: SerialNumber: 28754-0000:00:01.2-1 vm-test-run-hermes-remote> server # [ 10.776780] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 11.532806] SCSI subsystem initialized vm-test-run-hermes-remote> server # [ 11.641098] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 vm-test-run-hermes-remote> server # [ 11.648867] serio: i8042 KBD port at 0x60,0x64 irq 1 vm-test-run-hermes-remote> server # [ 11.650509] serio: i8042 AUX port at 0x60,0x64 irq 12 vm-test-run-hermes-remote> server # [ 11.031354] (udev-worker)[152]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> server # [ 11.041391] (udev-worker)[152]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> server # [ 11.108086] systemd[1]: Found device /dev/disk/by-label/nixos. vm-test-run-hermes-remote> server # [ 11.113065] systemd[1]: Reached target Initrd Root Device. vm-test-run-hermes-remote> server # [ 11.117996] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... vm-test-run-hermes-remote> server # [ 11.269995] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 11.278278] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-hermes-remote> server # [ 11.284137] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> server # [ 11.285813] systemd-fsck[157]: nixos: clean, 12/1572864 files, 142772/6291456 blocks vm-test-run-hermes-remote> server # [ 11.289303] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 11.335831] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. vm-test-run-hermes-remote> server # [ 11.352340] systemd[1]: Mounting /sysroot... vm-test-run-hermes-remote> server # [ 12.431209] hid: raw HID events driver (C) Jiri Kosina vm-test-run-hermes-remote> server # [ 13.094205] scsi host0: ata_piix vm-test-run-hermes-remote> server # [ 13.101044] scsi host1: ata_piix vm-test-run-hermes-remote> server # [ 13.101990] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0 vm-test-run-hermes-remote> server # [ 13.103467] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0 vm-test-run-hermes-remote> server # [ 13.117128] usbcore: registered new interface driver usbhid vm-test-run-hermes-remote> server # [ 13.119576] usbhid: USB HID core driver vm-test-run-hermes-remote> server # [ 13.185787] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 vm-test-run-hermes-remote> server # [ 13.269361] ata2: found unknown device (class 0) vm-test-run-hermes-remote> server # [ 13.271140] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 vm-test-run-hermes-remote> server # [ 13.274085] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 vm-test-run-hermes-remote> client # [ 13.671857] initrd-nixos-activation-start[228]: setting up /etc... vm-test-run-hermes-remote> client # [ 13.999109] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 14.000807] systemd[1]: Finished NixOS Activation. vm-test-run-hermes-remote> client # [ 14.006109] systemd[1]: Starting Switch Root... vm-test-run-hermes-remote> client # [ 14.034936] systemd[1]: Switching root. vm-test-run-hermes-remote> client # [ 14.688864] systemd-journald[76]: Received SIGTERM from PID 1 (systemd). vm-test-run-hermes-remote> client # [ 15.517182] NET: Registered PF_VSOCK protocol family vm-test-run-hermes-remote> server # [ 15.376322] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 vm-test-run-hermes-remote> server # [ 15.380781] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0 vm-test-run-hermes-remote> server # [ 15.457213] EXT4-fs (vda): mounted filesystem 2075940e-f2ec-4768-b37a-cb7ac0b83102 r/w with ordered data mode. Quota mode: none. vm-test-run-hermes-remote> server # [ 14.810619] systemd[1]: Mounted /sysroot. vm-test-run-hermes-remote> server # [ 14.811996] systemd[1]: Reached target Initrd Root File System. vm-test-run-hermes-remote> server # [ 14.824549] systemd[1]: Mounting /sysroot/nix/.ro-store... vm-test-run-hermes-remote> server # [ 15.491811] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray vm-test-run-hermes-remote> server # [ 14.840718] systemd[1]: Mounting /sysroot/nix/.rw-store... vm-test-run-hermes-remote> server # [ 14.866162] systemd[1]: Mounting /sysroot/run... vm-test-run-hermes-remote> server # [ 14.879723] systemd[1]: Mounting /sysroot/tmp/shared... vm-test-run-hermes-remote> server # [ 14.886483] systemd[1]: Mounting /sysroot/tmp/xchg... vm-test-run-hermes-remote> server # [ 14.920965] systemd[1]: Starting Mountpoints Configured in the Real Root... vm-test-run-hermes-remote> client # [ 16.011575] systemd[1]: systemd 261 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> client # [ 16.019916] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> client # [ 16.021005] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> client # [ 16.028170] systemd[1]: Detected first boot. vm-test-run-hermes-remote> server # [ 14.962404] systemd[1]: Mounted /sysroot/nix/.rw-store. vm-test-run-hermes-remote> server # [ 14.973281] systemd[1]: Mounted /sysroot/run. vm-test-run-hermes-remote> server # [ 14.987749] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> client # [ 16.104273] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> server # [ 15.008961] systemd-sysroot-fstab-check[192]: /sysroot should be mounted in the initrd, will request daemon-reload. vm-test-run-hermes-remote> server # [ 15.026467] systemd[1]: Reload requested from client PID 192 ('systemd-sysroot') (unit initrd-parse-etc.service)... vm-test-run-hermes-remote> server # [ 15.035297] systemd[1]: Reloading... vm-test-run-hermes-remote> server # [ 15.716575] cdrom: Uniform CD-ROM driver Revision: 3.20 vm-test-run-hermes-remote> server # [ 15.718319] 9p: Installing v9fs 9p2000 file system support vm-test-run-hermes-remote> server # [ 15.219191] systemd[1]: Reloading finished in 199 ms. vm-test-run-hermes-remote> server # [ 15.288044] systemd[1]: Mounted /sysroot/nix/.ro-store. vm-test-run-hermes-remote> server # [ 15.289360] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 15.298393] systemd-sysroot-fstab-check[192]: Requesting initrd-fs.target/start/replace... vm-test-run-hermes-remote> server # [ 15.301888] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 15.310413] systemd-sysroot-fstab-check[192]: Requesting swap.target/start/replace... vm-test-run-hermes-remote> server # [ 15.315399] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio vm-test-run-hermes-remote> server # [ 15.324836] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 15.333648] systemd[1]: initrd-parse-etc.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 15.338393] systemd[1]: Finished Mountpoints Configured in the Real Root. vm-test-run-hermes-remote> server # [ 15.346654] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. vm-test-run-hermes-remote> server # [ 15.407869] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 15.410228] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 15.548939] systemd[1]: Mounted /sysroot/tmp/shared. vm-test-run-hermes-remote> server # [ 15.653856] systemd[1]: Mounted /sysroot/tmp/xchg. vm-test-run-hermes-remote> server # [ 15.775463] systemd[1]: Mounting /sysroot/nix/store... vm-test-run-hermes-remote> server # [ 15.964150] systemd[1]: Mounted /sysroot/nix/store. vm-test-run-hermes-remote> server # [ 15.972079] systemd[1]: Reached target Initrd File Systems. vm-test-run-hermes-remote> server # [ 15.985838] systemd[1]: Starting Find NixOS closure... vm-test-run-hermes-remote> server # [ 16.012312] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-hermes-remote> server # [ 16.089541] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 16.091324] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.116141] systemd[1]: Finished Find NixOS closure. vm-test-run-hermes-remote> server # [ 16.117387] systemd[1]: Reached target Initrd Default Target. vm-test-run-hermes-remote> server # [ 16.130783] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-hermes-remote> server # [ 16.191905] systemd[1]: Stopped target Initrd Default Target. vm-test-run-hermes-remote> server # [ 16.193462] systemd[1]: Stopped target Basic System. vm-test-run-hermes-remote> server # [ 16.194648] systemd[1]: Stopped target Initrd Root Device. vm-test-run-hermes-remote> server # [ 16.197079] systemd[1]: Stopped target Path Units. vm-test-run-hermes-remote> server # [ 16.198152] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.210113] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 16.227813] systemd[1]: Stopped target Slice Units. vm-test-run-hermes-remote> server # [ 16.229149] systemd[1]: Stopped target Socket Units. vm-test-run-hermes-remote> server # [ 16.238413] systemd[1]: Stopped target System Initialization. vm-test-run-hermes-remote> server # [ 16.239842] systemd[1]: Stopped target Swaps. vm-test-run-hermes-remote> server # [ 16.257090] systemd[1]: Stopped target Timer Units. vm-test-run-hermes-remote> server # [ 16.258345] systemd[1]: dbus.socket: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.259673] systemd[1]: Closed D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 16.275706] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.277409] systemd[1]: Stopped Find NixOS closure. vm-test-run-hermes-remote> server # [ 16.289151] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio vm-test-run-hermes-remote> server # [ 16.313425] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 16.317260] systemd[1]: systemd-sysctl.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.329492] systemd[1]: Stopped Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 16.332972] systemd[1]: systemd-modules-load.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.340620] systemd[1]: Stopped Load Kernel Modules. vm-test-run-hermes-remote> server # [ 16.351647] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.365409] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> client # [ 17.453414] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> server # [ 16.370397] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.386226] systemd[1]: Stopped Create System Files and Directories. vm-test-run-hermes-remote> server # [ 16.396833] systemd[1]: Stopped target Local File Systems. vm-test-run-hermes-remote> server # [ 16.399847] systemd[1]: Stopped target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 16.401925] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.411307] systemd[1]: Stopped Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 16.413118] systemd[1]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 16.415065] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.425368] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 16.427086] systemd[1]: initrd-cleanup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.449969] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. vm-test-run-hermes-remote> server # [ 16.461419] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.490419] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 16.495604] systemd[1]: systemd-udevd.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.505249] systemd[1]: Stopped Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 16.534085] systemd[1]: systemd-udevd.service: Consumed 2.750s CPU time over 10.559s wall clock time, 26.5M memory peak. vm-test-run-hermes-remote> server # [ 16.537059] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.558677] systemd[1]: Closed udev Control Socket. vm-test-run-hermes-remote> server # [ 16.563391] systemd[1]: Starting Cleanup udev Database... vm-test-run-hermes-remote> server # [ 16.566505] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.583568] systemd[1]: Stopped Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 16.591272] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.634866] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 16.637136] systemd[1]: kmod-static-nodes.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.639108] systemd[1]: Stopped Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 16.647537] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.650071] systemd[1]: Finished Cleanup udev Database. vm-test-run-hermes-remote> server # [ 16.654990] systemd[1]: Reached target Switch Root. vm-test-run-hermes-remote> server # [ 16.656529] systemd[1]: Starting NixOS Activation... vm-test-run-hermes-remote> server # [ 17.795391] initrd-nixos-activation-start[253]: booting system configuration /nix/store/dbcmc66xbdmq1395qzmbpj64mdl0bbl1-nixos-system-server-test vm-test-run-hermes-remote> client # [ 19.006208] systemd[1]: Applying preset policy. vm-test-run-hermes-remote> server # [ 18.892796] initrd-nixos-activation-start[253]: running activation script... vm-test-run-hermes-remote> client # [ 21.225048] systemd[1]: Populated /etc with preset unit settings. vm-test-run-hermes-remote> server # [ 20.951347] initrd-nixos-activation-start[276]: setting up /etc... vm-test-run-hermes-remote> server # [ 21.345209] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 21.346917] systemd[1]: Finished NixOS Activation. vm-test-run-hermes-remote> server # [ 21.352903] systemd[1]: Starting Switch Root... vm-test-run-hermes-remote> server # [ 21.415248] systemd[1]: Switching root. vm-test-run-hermes-remote> server # [ 22.172079] systemd-journald[92]: Received SIGTERM from PID 1 (systemd). vm-test-run-hermes-remote> server # [ 25.149072] NET: Registered PF_VSOCK protocol family vm-test-run-hermes-remote> client # [ 26.575804] systemd[1]: initrd-switch-root.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 26.578137] systemd[1]: Stopped initrd-switch-root.service. vm-test-run-hermes-remote> client # [ 26.582971] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. vm-test-run-hermes-remote> client # [ 26.589123] systemd[1]: Created slice Slice /system/getty. vm-test-run-hermes-remote> client # [ 26.590936] systemd[1]: Created slice User and Session Slice. vm-test-run-hermes-remote> client # [ 26.595328] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 26.596988] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-hermes-remote> client # [ 26.601565] systemd[1]: Expecting device /dev/hvc0... vm-test-run-hermes-remote> client # [ 26.602536] systemd[1]: Expecting device /dev/ttyS0... vm-test-run-hermes-remote> client # [ 26.606694] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-hermes-remote> client # [ 26.607867] systemd[1]: Stopped target initrd-fs.target. vm-test-run-hermes-remote> client # [ 26.608914] systemd[1]: Stopped target initrd-root-fs.target. vm-test-run-hermes-remote> client # [ 26.613127] systemd[1]: Stopped target initrd-switch-root.target. vm-test-run-hermes-remote> client # [ 26.614288] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-hermes-remote> client # [ 26.618676] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> client # [ 26.619671] systemd[1]: Reached target Remote File Systems. vm-test-run-hermes-remote> client # [ 26.620748] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> client # [ 26.624860] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> client # [ 26.647035] systemd[1]: Listening on Query the User Interactively for a Password. vm-test-run-hermes-remote> client # [ 26.652479] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-hermes-remote> client # [ 26.664618] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-hermes-remote> client # [ 26.680556] systemd[1]: Listening on Factory Reset Management. vm-test-run-hermes-remote> client # [ 26.681926] systemd[1]: Listening on Hostname Service Socket. vm-test-run-hermes-remote> client # [ 26.704845] systemd[1]: Starting Journal Log Access Socket... vm-test-run-hermes-remote> client # [ 26.718319] systemd[1]: Listening on Journal Audit Socket. vm-test-run-hermes-remote> client # [ 26.738233] systemd[1]: Listening on Console Output Muting Service Socket. vm-test-run-hermes-remote> client # [ 26.748575] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-hermes-remote> client # [ 26.770333] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 26.772305] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki vm-test-run-hermes-remote> client # [ 26.853573] systemd[1]: Listening on Disk Repartitioning Service Socket. vm-test-run-hermes-remote> client # [ 26.855192] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> client # [ 26.873150] systemd[1]: Listening on udev Varlink Socket. vm-test-run-hermes-remote> client # [ 26.879677] systemd[1]: Mounting Huge Pages File System... vm-test-run-hermes-remote> client # [ 26.889385] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-hermes-remote> client # [ 26.902512] systemd[1]: Mounting Kernel Debug File System... vm-test-run-hermes-remote> client # [ 26.917231] systemd[1]: Mounting Kernel Trace File System... vm-test-run-hermes-remote> client # [ 26.949310] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> client # [ 26.950722] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio vm-test-run-hermes-remote> client # [ 26.966684] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> client # [ 26.967959] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm vm-test-run-hermes-remote> server # [ 26.551560] systemd[1]: systemd 261 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> server # [ 26.557507] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> client # [ 26.970700] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> client # [ 26.985335] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> server # [ 26.558592] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> server # [ 26.568225] systemd[1]: Detected first boot. vm-test-run-hermes-remote> client # [ 26.994711] systemd[1]: Mounting FUSE Control File System... vm-test-run-hermes-remote> client # [ 26.995959] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> client # [ 27.034780] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 26.615959] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> client # [ 27.068103] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> client # [ 27.091342] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-hermes-remote> client # [ 27.131050] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-hermes-remote> client # [ 27.144585] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 27.207711] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> client # [ 27.251805] systemd[1]: Listening on Journal Log Access Socket. vm-test-run-hermes-remote> client # [ 27.412467] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 27.439627] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> client # [ 27.462505] systemd[1]: Mounted Huge Pages File System. vm-test-run-hermes-remote> client # [ 27.464006] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-hermes-remote> client # [ 27.494281] systemd[1]: Mounted Kernel Debug File System. vm-test-run-hermes-remote> client # [ 27.499217] systemd[1]: Mounted Kernel Trace File System. vm-test-run-hermes-remote> client # [ 27.551593] systemd[1]: Mounted FUSE Control File System. vm-test-run-hermes-remote> client # [ 27.557737] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 27.559844] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> client # [ 27.580447] systemd-journald[298]: Collecting audit messages is enabled. vm-test-run-hermes-remote> client # [ 27.633379] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-hermes-remote> client # [ 27.707099] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> client # [ 27.178126] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-hermes-remote> client # [ 27.188273] systemd[1]: systemd-journald.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 27.197943] systemd-modules-load[299]: Using 2 probe threads vm-test-run-hermes-remote> client # [ 27.744621] EXT4-fs (vda): re-mounted 9cd01443-b3a2-46d7-91ed-0dadfedc31a8. vm-test-run-hermes-remote> client # [ 27.308877] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-hermes-remote> client # [ 27.313582] systemd[1]: Listening on Disk Image Download Service Socket. vm-test-run-hermes-remote> client # [ 27.323484] systemd-oomd[301]: No swap; memory pressure usage will be degraded vm-test-run-hermes-remote> client # [ 27.348665] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-hermes-remote> client # [ 27.350258] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> client # [ 27.395096] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-hermes-remote> client # [ 27.396452] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 27.571338] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> client # [ 27.469047] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-hermes-remote> client # [ 28.083951] loop: module loaded vm-test-run-hermes-remote> client # [ 27.542581] systemd-modules-load[299]: Inserted module 'loop' vm-test-run-hermes-remote> client # [ 27.582187] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> client # [ 27.626408] systemd[1]: Starting Firewall... vm-test-run-hermes-remote> client # [ 27.659969] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> client # [ 27.661426] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-hermes-remote> server: Guest root shell did not produce any data yet... vm-test-run-hermes-remote> client # [ 28.232020] systemd-journald[298]: Received client request to flush runtime journal. vm-test-run-hermes-remote> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-hermes-remote> client # [ 27.968158] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-hermes-remote> client # [ 27.980414] systemd[1]: Reached target First Boot Complete. vm-test-run-hermes-remote> client # [ 27.990681] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-hermes-remote> client # [ 28.053274] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 28.143174] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> client # [ 28.186894] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> client # [ 28.288218] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> client # [ 28.515490] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 28.517062] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> client # [ 28.529907] systemd[1]: Mounting /run/wrappers... vm-test-run-hermes-remote> client # [ 28.541943] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 28.743089] systemd[1]: Applying preset policy. vm-test-run-hermes-remote> client # [ 28.754792] systemd[1]: Mounted /run/wrappers. vm-test-run-hermes-remote> client # [ 28.756551] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> client # [ 28.771052] systemd[1]: Listening on Boot Loader Control Service Socket. vm-test-run-hermes-remote> client # [ 28.804193] systemd[1]: Starting register-nix-paths.service... vm-test-run-hermes-remote> client # [ 28.829556] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-hermes-remote> client # [ 28.831316] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-hermes-remote> client # [ 28.891965] systemd-udevd[336]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> client # [ 28.920341] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-hermes-remote> client # [ 28.984421] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 29.283571] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-hermes-remote> client # [ 29.297046] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-hermes-remote> client # [ 29.605113] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> client # [ 29.623779] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-hermes-remote> client # [ 29.630579] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-hermes-remote> client # [ 29.806605] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-hermes-remote> client # [ 29.881538] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> client # [ 30.138696] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> client # [ 30.224827] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. vm-test-run-hermes-remote> client # [ 30.260290] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. vm-test-run-hermes-remote> client # [ 30.436472] (udev-worker)[386]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> client # [ 30.460947] (udev-worker)[386]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 30.481580] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-hermes-remote> client # [ 30.515210] (udev-worker)[384]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 30.528893] systemd[1]: Starting Update is Completed... vm-test-run-hermes-remote> client # [ 31.334340] rtc_cmos 00:05: RTC can wake from S4 vm-test-run-hermes-remote> client # [ 31.354662] rtc_cmos 00:05: registered as rtc0 vm-test-run-hermes-remote> client # [ 31.366986] rtc_cmos 00:05: setting system clock to 2026-07-31T14:20:54 UTC (1785507654) vm-test-run-hermes-remote> client # [ 31.368885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 vm-test-run-hermes-remote> client # [ 31.411211] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs vm-test-run-hermes-remote> client # [ 31.465492] ACPI: button: Power Button [PWRF] vm-test-run-hermes-remote> client # [ 31.520210] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console vm-test-run-hermes-remote> client # [ 31.028923] systemd[1]: Condition check resulted in Virtio network device being skipped. vm-test-run-hermes-remote> client # [ 31.036791] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> client # [ 31.058643] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-hermes-remote> client # [ 31.096749] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> client # [ 31.117405] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> client # [ 31.123193] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 31.138571] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 31.549125] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4 vm-test-run-hermes-remote> client # [ 31.572139] Floppy drive(s): fd0 is 2.88M AMI BIOS vm-test-run-hermes-remote> client # [ 31.605945] FDC 0 is a S82078B vm-test-run-hermes-remote> client # [ 31.695124] Console: switching to colour dummy device 80x25 vm-test-run-hermes-remote> client # [ 31.726083] [drm] Found bochs VGA, ID 0xb0c5. vm-test-run-hermes-remote> client # [ 31.726086] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. vm-test-run-hermes-remote> client # [ 31.757327] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 vm-test-run-hermes-remote> client # [ 31.764507] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic vm-test-run-hermes-remote> client # [ 31.771977] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 vm-test-run-hermes-remote> client # [ 31.773893] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD vm-test-run-hermes-remote> client # [ 31.784228] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0 vm-test-run-hermes-remote> client # [ 31.795127] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 vm-test-run-hermes-remote> client # [ 31.800869] parport_pc 00:03: reported by Plug and Play ACPI vm-test-run-hermes-remote> client # [ 31.806720] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] vm-test-run-hermes-remote> client # [ 31.806801] mousedev: PS/2 mouse device common for all mice vm-test-run-hermes-remote> client # [ 31.275887] systemd[1]: Finished Update is Completed. vm-test-run-hermes-remote> client # [ 31.838877] fbcon: bochs-drmdrmfb (fb0) is primary device vm-test-run-hermes-remote> client # [ 31.866853] Console: switching to colour frame buffer device 160x50 vm-test-run-hermes-remote> client # [ 31.874769] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device vm-test-run-hermes-remote> client # [ 32.129905] ppdev: user-space parallel port driver vm-test-run-hermes-remote> client # [ 31.607461] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 31.874579] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 31.891107] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> client # [ 31.936877] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 32.971007] kvm_amd: TSC scaling supported vm-test-run-hermes-remote> client # [ 32.973066] kvm_amd: Nested Virtualization enabled vm-test-run-hermes-remote> client # [ 32.973797] kvm_amd: Nested Paging enabled vm-test-run-hermes-remote> client # [ 32.974392] kvm_amd: LBR virtualization supported vm-test-run-hermes-remote> client # [ 32.975103] kvm_amd: Virtual GIF supported vm-test-run-hermes-remote> client # [ 32.978319] kvm_amd: Virtual NMI enabled vm-test-run-hermes-remote> client # [ 33.766353] EDAC MC: Ver: 3.0.0 vm-test-run-hermes-remote> server # [ 35.547742] systemd[1]: Populated /etc with preset unit settings. vm-test-run-hermes-remote> client # [ 35.759175] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 35.763137] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-hermes-remote> client # [ 37.059797] systemd[1]: Finished register-nix-paths.service. vm-test-run-hermes-remote> client # [ 38.000895] systemd-vconsole-setup[424]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> client # [ 38.020094] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> client # [ 38.026141] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> client # [ 38.030809] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-hermes-remote> client # [ 38.032310] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-hermes-remote> client # [ 38.045899] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> client # [ 38.047102] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 38.058541] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-hermes-remote> client # [ 38.059929] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. vm-test-run-hermes-remote> client # [ 38.079856] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> client # [ 38.081123] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> client # [ 38.097543] systemd[1]: Started backdoor.service. vm-test-run-hermes-remote> client # [ 38.098756] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-hermes-remote> client # [ 38.127939] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> client # [ 38.169123] systemd[1]: Starting Post-Boot Actions... vm-test-run-hermes-remote> client # [ 38.191561] systemd[1]: Started Reset console on configuration changes. vm-test-run-hermes-remote> client # [ 38.208314] systemd[1]: Starting resolvconf update... vm-test-run-hermes-remote> client # [ 38.240843] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-hermes-remote> client # [ 38.532414] systemd[1]: Finished Post-Boot Actions. vm-test-run-hermes-remote> client # [ 38.765918] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 38.767568] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> client # [ 38.779506] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> client # [ 38.806339] nsncd[522]: Jul 31 14:21:02.479 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> client # [ 38.818546] systemd[1]: Starting User Login Management... vm-test-run-hermes-remote> client # connecting to host... vm-test-run-hermes-remote> client # [ 39.005873] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-hermes-remote> client # [ 39.085246] systemd-logind[550]: New seat seat0. vm-test-run-hermes-remote> client # [ 39.098112] systemd-logind[550]: Watching system buttons on /dev/input/event2 (Power Button) vm-test-run-hermes-remote> client # [ 39.099844] systemd-logind[550]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-hermes-remote> client # [ 39.101477] systemd-logind[550]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) vm-test-run-hermes-remote> client # [ 39.120931] systemd[1]: Started User Login Management. vm-test-run-hermes-remote> client # [ 39.137851] systemd[1]: Starting linger-users.service... vm-test-run-hermes-remote> client # [ 39.402333] dbus-broker-launch[528]: Looking up NSS user entry for 'systemd-timesync'... vm-test-run-hermes-remote> client # [ 39.492103] dbus-broker-launch[528]: NSS returned no entry for 'systemd-timesync' vm-test-run-hermes-remote> client # [ 39.493643] dbus-broker-launch[528]: Invalid user-name in /nix/store/bkz23nlwwq3xn5inj55iy1gjjiaj1iqy-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" vm-test-run-hermes-remote> client # [ 39.575503] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-hermes-remote> client # [ 39.576925] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-hermes-remote> client # [ 39.578214] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-hermes-remote> client # [ 39.600189] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-hermes-remote> client # [ 39.600401] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> client # [ 39.674349] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 39.674628] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 39.714785] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> client # [ 39.715480] systemd[1]: Started D-Bus System Message Bus. vm-test-run-hermes-remote> client # [ 39.862691] dbus-broker-launch[528]: Ready vm-test-run-hermes-remote> client # [ 39.915689] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 39.926336] nsncd[629]: Jul 31 14:21:03.593 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> client # [ 39.927953] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> client # [ 39.936804] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> client # [ 40.001422] systemd[1]: Created slice Slice /user/1000. vm-test-run-hermes-remote> client # [ 40.019163] systemd[1]: Starting User Runtime Directory /run/user/1000... vm-test-run-hermes-remote> client # [ 40.048491] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 40.049601] systemd[1]: Finished linger-users.service. vm-test-run-hermes-remote> client # [ 40.208073] systemd[1]: Finished User Runtime Directory /run/user/1000. vm-test-run-hermes-remote> client # [ 40.218496] systemd[1]: Starting User Manager for UID 1000... vm-test-run-hermes-remote> client # [ 40.250518] systemd[1]: Finished resolvconf update. vm-test-run-hermes-remote> client # [ 40.259039] systemd[1]: Starting DHCP Client... vm-test-run-hermes-remote> server # [ 40.493026] systemd[1]: microvm@hermes-alice.service: Service uses a combination of Type=simple, ExecStartPost=, and credentials. This could lead to race conditions. Continuing. vm-test-run-hermes-remote> client # [ 40.550688] (systemd)[658]: pam_unix(systemd-user:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 40.701986] systemd[1]: Finished Firewall. vm-test-run-hermes-remote> client # [ 40.703578] systemd[1]: Reached target Preparation for Network. vm-test-run-hermes-remote> client # [ 40.719388] systemd[1]: Starting Address configuration of eth1... vm-test-run-hermes-remote> client # [ 40.742943] systemd[1]: Starting Extra networking commands.... vm-test-run-hermes-remote> client # [ 40.819599] systemd-logind[550]: New session '1' of user 'alice' with class 'manager' and type 'unspecified'. vm-test-run-hermes-remote> client # [ 40.996928] dhcpcd[670]: dhcpcd-10.3.2 starting vm-test-run-hermes-remote> client # [ 41.003195] systemd[658]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> client # [ 41.194591] dhcpcd[679]: dev: loaded udev vm-test-run-hermes-remote> client # [ 42.190680] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-hermes-remote> client # [ 42.194930] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-hermes-remote> client # [ 41.653696] network-addresses-eth1-start[672]: adding address 192.168.1.1/24... done vm-test-run-hermes-remote> client # [ 41.723674] network-addresses-eth1-start[672]: adding address 2001:db8:1::1/64... done vm-test-run-hermes-remote> client # [ 41.740362] systemd[1]: Finished Extra networking commands.. vm-test-run-hermes-remote> client # [ 41.745573] systemd[1]: Reached target Network. vm-test-run-hermes-remote> client # [ 41.754794] systemd[1]: Starting Permit User Sessions... vm-test-run-hermes-remote> client # [ 41.788062] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-hermes-remote> client # [ 41.841929] systemd[1]: Finished Address configuration of eth1. vm-test-run-hermes-remote> client # [ 42.072312] systemd[1]: Finis[ 42.616891] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-hermes-remote> client # hed Permit User Sessions. vm-test-run-hermes-remote> client # [ 42.092421] systemd[1]: Started Getty on tty1. vm-test-run-hermes-remote> client # [ 42.093806] systemd[1]: Reached target Login Prompts. vm-test-run-hermes-remote> client # [ 42.874591] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-hermes-remote> client # [ 42.875503] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-hermes-remote> client # [ 42.887002] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 vm-test-run-hermes-remote> client # [ 42.888310] cfg80211: failed to load regulatory.db vm-test-run-hermes-remote> client # [ 43.007771] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-hermes-remote> client # [ 42.467877] dhcpcd[679]: eth0: waiting for carrier vm-test-run-hermes-remote> client # [ 42.475993] dhcpcd[679]: eth0: carrier acquired vm-test-run-hermes-remote> client # [ 42.496855] dhcpcd[679]: DUID 00:01:00:01:31:ff:6b:d2:52:54:00:12:34:56 vm-test-run-hermes-remote> client # [ 42.498324] dhcpcd[679]: eth0: IAID 00:12:34:56 vm-test-run-hermes-remote> client # [ 42.499382] dhcpcd[679]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-hermes-remote> client # [ 42.539157] systemd[658]: Queued start job for default target Main User Target. vm-test-run-hermes-remote> client # [ 42.550826] systemd[658]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> client # [ 42.556829] systemd[658]: Created slice User Application Slice. vm-test-run-hermes-remote> client # [ 42.558332] systemd[658]: Started Daily Cleanup of User's Temporary Directories. vm-test-run-hermes-remote> client # [ 42.559990] systemd[658]: Reached target Paths. vm-test-run-hermes-remote> client # [ 42.564246] systemd[658]: Reached target Timers. vm-test-run-hermes-remote> client # [ 42.566077] systemd[658]: Starting D-Bus User Message Bus Socket... vm-test-run-hermes-remote> client # [ 42.575649] systemd[658]: Starting Create User Files and Directories... vm-test-run-hermes-remote> client # [ 42.631342] dhcpcd[679]: eth0: soliciting a DHCP lease vm-test-run-hermes-remote> client # [ 42.655815] systemd[658]: Finished Create User Files and Directories. vm-test-run-hermes-remote> client # [ 43.262270] NET: Registered PF_PACKET protocol family vm-test-run-hermes-remote> client # [ 42.753360] dhcpcd[679]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-hermes-remote> client # [ 42.764871] dhcpcd[679]: eth0: probing address 10.0.2.15/24 vm-test-run-hermes-remote> client # [ 42.819078] systemd[658]: Listening on D-Bus User Message Bus Socket. vm-test-run-hermes-remote> client # [ 42.820832] systemd[658]: Reached target Sockets. vm-test-run-hermes-remote> client # [ 42.826344] systemd[658]: Reached target Basic System. vm-test-run-hermes-remote> client # [ 42.834811] systemd[1]: Started User Manager for UID 1000. vm-test-run-hermes-remote> client # [ 42.839142] systemd[658]: Starting Run user-specific NixOS activation... vm-test-run-hermes-remote> client # [ 42.934915] systemd[658]: Finished Run user-specific NixOS activation. vm-test-run-hermes-remote> client # [ 42.935289] systemd[658]: Reached target Main User Target. vm-test-run-hermes-remote> client # [ 42.935519] systemd[658]: Startup finished in 1.962s. vm-test-run-hermes-remote> server # [ 43.211852] systemd[1]: initrd-switch-root.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 43.226206] systemd[1]: Stopped initrd-switch-root.service. vm-test-run-hermes-remote> server # [ 43.258661] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. vm-test-run-hermes-remote> server # [ 43.262652] systemd[1]: Created slice Slice /system/getty. vm-test-run-hermes-remote> server # [ 43.264723] systemd[1]: Created slice Slice /system/microvm. vm-test-run-hermes-remote> server # [ 43.267490] systemd[1]: Created slice Slice /system/microvm-macvtap-interfaces. vm-test-run-hermes-remote> server # [ 43.270082] systemd[1]: Created slice Slice /system/microvm-pci-devices. vm-test-run-hermes-remote> server # [ 43.272143] systemd[1]: Created slice Slice /system/microvm-set-booted. vm-test-run-hermes-remote> server # [ 43.274704] systemd[1]: Created slice Slice /system/microvm-tap-interfaces. vm-test-run-hermes-remote> server # [ 43.281695] systemd[1]: Created slice Slice /system/microvm-virtiofsd. vm-test-run-hermes-remote> server # [ 43.284109] systemd[1]: Created slice User and Session Slice. vm-test-run-hermes-remote> server # [ 43.287914] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 43.289655] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-hermes-remote> server # [ 43.296448] systemd[1]: Expecting device /dev/hvc0... vm-test-run-hermes-remote> server # [ 43.297464] systemd[1]: Expecting device /dev/ttyS0... vm-test-run-hermes-remote> server # [ 43.298513] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-hermes-remote> server # [ 43.304095] systemd[1]: Stopped target initrd-fs.target. vm-test-run-hermes-remote> server # [ 43.305243] systemd[1]: Stopped target initrd-root-fs.target. vm-test-run-hermes-remote> server # [ 43.306342] systemd[1]: Stopped target initrd-switch-root.target. vm-test-run-hermes-remote> server # [ 43.311923] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-hermes-remote> server # [ 43.313398] systemd[1]: Reached target Remote File Systems. vm-test-run-hermes-remote> server # [ 43.318912] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> server # [ 43.320267] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> server # [ 43.412505] systemd[1]: Listening on Query the User Interactively for a Password. vm-test-run-hermes-remote> server # [ 43.462658] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-hermes-remote> server # [ 43.512837] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-hermes-remote> server # [ 43.555744] systemd[1]: Listening on Factory Reset Management. vm-test-run-hermes-remote> server # [ 43.557444] systemd[1]: Listening on Hostname Service Socket. vm-test-run-hermes-remote> server # [ 43.618406] systemd[1]: Starting Journal Log Access Socket... vm-test-run-hermes-remote> server # [ 43.634248] systemd[1]: Listening on Journal Audit Socket. vm-test-run-hermes-remote> server # [ 43.640061] systemd[1]: Listening on Console Output Muting Service Socket. vm-test-run-hermes-remote> server # [ 43.641821] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-hermes-remote> server # [ 43.653732] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 43.655756] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki vm-test-run-hermes-remote> server # [ 43.732827] systemd[1]: Listening on Disk Repartitioning Service Socket. vm-test-run-hermes-remote> server # [ 43.734514] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 43.736348] systemd[1]: Listening on udev Varlink Socket. vm-test-run-hermes-remote> server # [ 43.761148] systemd[1]: Mounting Huge Pages File System... vm-test-run-hermes-remote> server # [ 43.783280] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-hermes-remote> server # [ 43.790255] systemd[1]: Mounting Kernel Debug File System... vm-test-run-hermes-remote> server # [ 43.800317] systemd[1]: Mounting Kernel Trace File System... vm-test-run-hermes-remote> server # [ 43.831597] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 43.833076] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio vm-test-run-hermes-remote> server # [ 43.852060] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 43.853419] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm vm-test-run-hermes-remote> server # [ 43.859497] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> server # [ 43.888432] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> server # [ 43.919431] systemd[1]: Mounting FUSE Control File System... vm-test-run-hermes-remote> server # [ 43.920775] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> server # [ 43.957207] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 43.988925] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> server # [ 44.021341] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-hermes-remote> server # [ 44.061844] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-hermes-remote> server # [ 44.063365] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 44.096268] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 44.109034] systemd[1]: Listening on Journal Log Access Socket. vm-test-run-hermes-remote> server # [ 44.476298] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-hermes-remote> server # [ 44.477964] systemd[1]: Mounted Huge Pages File System. vm-test-run-hermes-remote> server # [ 44.479417] systemd[1]: Mounted Kernel Debug File System. vm-test-run-hermes-remote> server # [ 44.486729] systemd[1]: Mounted Kernel Trace File System. vm-test-run-hermes-remote> server # [ 44.488143] systemd[1]: Mounted FUSE Control File System. vm-test-run-hermes-remote> server # [ 44.493908] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 44.519207] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 44.581353] systemd-journald[346]: Collecting audit messages is enabled. vm-test-run-hermes-remote> server # [ 44.601281] EXT4-fs (vda): re-mounted 2075940e-f2ec-4768-b37a-cb7ac0b83102. vm-test-run-hermes-remote> server # [ 44.611264] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-hermes-remote> server # [ 44.613951] systemd[1]: Listening on Disk Image Download Service Socket. vm-test-run-hermes-remote> server # [ 44.615364] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> server # [ 44.648596] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-hermes-remote> server # [ 44.649991] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 44.687273] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> server # [ 44.048072] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-hermes-remote> server # [ 44.051652] systemd[1]: systemd-journald.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 44.058700] systemd-modules-load[347]: Using 4 probe threads vm-test-run-hermes-remote> server # [ 44.069489] systemd-oomd[349]: No swap; memory pressure usage will be degraded vm-test-run-hermes-remote> client # [ 44.611569] dhcpcd[679]: eth0: soliciting an IPv6 router vm-test-run-hermes-remote> client # [ 44.614935] dhcpcd[679]: eth0: Router Advertisement from fe80::2 vm-test-run-hermes-remote> client # [ 44.615790] dhcpcd[679]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-hermes-remote> client # [ 44.616350] dhcpcd[679]: eth0: adding route to fec0::/64 vm-test-run-hermes-remote> client # [ 44.617095] dhcpcd[679]: eth0: adding default route via fe80::2 vm-test-run-hermes-remote> server # [ 44.083371] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-hermes-remote> server # [ 44.086757] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 44.100918] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 44.137123] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-hermes-remote> server # [ 44.245284] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-hermes-remote> server # [ 44.937378] loop: module loaded vm-test-run-hermes-remote> server # [ 44.327047] systemd-modules-load[347]: Inserted module 'tap' vm-test-run-hermes-remote> server # [ 44.328666] systemd-modules-load[347]: Inserted module 'loop' vm-test-run-hermes-remote> server # [ 44.413871] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 45.130102] systemd-journald[346]: Received client request to flush runtime journal. vm-test-run-hermes-remote> server # [ 44.627728] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-hermes-remote> server # [ 44.629394] systemd[1]: Reached target First Boot Complete. vm-test-run-hermes-remote> server # [ 44.636242] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-hermes-remote> server # [ 44.643559] systemd-modules-load[347]: Inserted module 'vhost_vsock' vm-test-run-hermes-remote> server # [ 44.647686] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-hermes-remote> server # [ 45.359125] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-hermes-remote> server # [ 44.731923] systemd-modules-load[347]: Inserted module 'vhost_net' vm-test-run-hermes-remote> server # [ 44.749927] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 44.757726] systemd[1]: Starting Firewall... vm-test-run-hermes-remote> server # [ 44.768307] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 44.781914] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 44.799359] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 44.946415] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 44.965906] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 44.968651] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 44.976119] systemd[1]: Mounting /run/wrappers... vm-test-run-hermes-remote> server # [ 44.981717] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 45.077504] systemd[1]: Mounted /run/wrappers. vm-test-run-hermes-remote> server # [ 45.083857] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> server # [ 45.091892] systemd[1]: Listening on Boot Loader Control Service Socket. vm-test-run-hermes-remote> server # [ 45.100189] systemd[1]: Starting register-nix-paths.service... vm-test-run-hermes-remote> server # [ 45.108149] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-hermes-remote> server # [ 45.109641] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-hermes-remote> server # [ 45.124921] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-hermes-remote> server # [ 45.138195] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> server # [ 45.318338] systemd-udevd[384]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> server # [ 45.421298] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-hermes-remote> server # [ 45.448164] systemd-tmpfiles[390]: /etc/tmpfiles.d/10-microvm.conf:1: Duplicate line for path "/home/alice/hermes", ignoring. vm-test-run-hermes-remote> server # [ 45.464934] systemd-tmpfiles[390]: /etc/tmpfiles.d/10-microvm.conf:2: Duplicate line for path "/var/lib/hermes-microvm/alice/guest", ignoring. vm-test-run-hermes-remote> server # [ 45.482312] systemd-tmpfiles[390]: /etc/tmpfiles.d/10-microvm.conf:3: Duplicate line for path "/var/lib/hermes-microvm/alice/state-vault/state", ignoring. vm-test-run-hermes-remote> server # [ 45.787897] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 45.793857] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-hermes-remote> server # [ 45.837359] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-hermes-remote> server # [ 45.890803] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-hermes-remote> server # [ 46.446598] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-hermes-remote> server # [ 46.966212] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-hermes-remote> server # [ 47.001618] systemd[1]: Starting Update is Completed... vm-test-run-hermes-remote> client # [ 47.846635] dhcpcd[679]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-hermes-remote> client # [ 47.846956] dhcpcd[679]: eth0: adding route to 10.0.2.0/24 vm-test-run-hermes-remote> client # [ 47.847159] dhcpcd[679]: eth0: adding default route via 10.0.2.2 vm-test-run-hermes-remote> server # [ 47.391514] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 47.452559] systemd[1]: Finished Update is Completed. vm-test-run-hermes-remote> server # [ 47.641041] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> server # [ 47.699675] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. vm-test-run-hermes-remote> server # [ 47.718299] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. vm-test-run-hermes-remote> server # [ 47.997533] (udev-worker)[437]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> server # [ 48.016469] (udev-worker)[434]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 48.570445] systemd[1]: Started DHCP Client. vm-test-run-hermes-remote> server # [ 48.028507] (udev-worker)[437]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 48.583334] systemd[1]: Reached target Multi-User System. vm-test-run-hermes-remote> client # [ 48.608506] systemd[1]: Startup finished in 1.954s (kernel) + 12.594s (initrd) + 34.059s (userspace) = 48.607s. vm-test-run-hermes-remote> server # [ 48.999059] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 vm-test-run-hermes-remote> server # [ 49.025842] ACPI: button: Power Button [PWRF] vm-test-run-hermes-remote> server # [ 49.051789] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console vm-test-run-hermes-remote> server # [ 48.509586] systemd[1]: Condition check resulted in Virtio network device being skipped. vm-test-run-hermes-remote> server # [ 49.186728] Console: switching to colour dummy device 80x25 vm-test-run-hermes-remote> server # [ 48.531440] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> server # [ 49.191168] [drm] Found bochs VGA, ID 0xb0c5. vm-test-run-hermes-remote> server # [ 49.191174] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. vm-test-run-hermes-remote> server # [ 48.544187] s[ 49.202346] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic vm-test-run-hermes-remote> server # ystemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-hermes-remote> server # [ 48.562759] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> server # [ 49.236839] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0 vm-test-run-hermes-remote> server # [ 48.585935] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> server # [ 48.595081] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 48.619313] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 49.261686] fbcon: bochs-drmdrmfb (fb0) is primary device vm-test-run-hermes-remote> server # [ 49.285140] Console: switching to colour frame buffer device 160x50 vm-test-run-hermes-remote> server # [ 49.295155] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device vm-test-run-hermes-remote> server # [ 49.458858] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4 vm-test-run-hermes-remote> server # [ 49.473575] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 vm-test-run-hermes-remote> server # [ 49.475132] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 vm-test-run-hermes-remote> server # [ 49.493674] rtc_cmos 00:05: RTC can wake from S4 vm-test-run-hermes-remote> server # [ 49.503356] rtc_cmos 00:05: registered as rtc0 vm-test-run-hermes-remote> server # [ 49.507370] rtc_cmos 00:05: setting system clock to 2026-07-31T14:21:12 UTC (1785507672) vm-test-run-hermes-remote> server # [ 49.509249] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs vm-test-run-hermes-remote> server # [ 49.527008] Floppy drive(s): fd0 is 2.88M AMI BIOS vm-test-run-hermes-remote> server # [ 49.542598] FDC 0 is a S82078B vm-test-run-hermes-remote> server # [ 49.934746] parport_pc 00:03: reported by Plug and Play ACPI vm-test-run-hermes-remote> server # [ 49.942345] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] vm-test-run-hermes-remote> server # [ 49.987776] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 vm-test-run-hermes-remote> server # [ 49.991091] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD vm-test-run-hermes-remote> server # [ 50.560704] mousedev: PS/2 mouse device common for all mice vm-test-run-hermes-remote> server # [ 50.186119] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 50.458172] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 50.466191] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 50.487296] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 53.402514] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 53.404081] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-hermes-remote> server # [ 54.190646] ppdev: user-space parallel port driver vm-test-run-hermes-remote> server # [ 55.086741] kvm_amd: TSC scaling supported vm-test-run-hermes-remote> server # [ 55.087512] kvm_amd: Nested Virtualization enabled vm-test-run-hermes-remote> server # [ 55.088198] kvm_amd: Nested Paging enabled vm-test-run-hermes-remote> server # [ 55.088905] kvm_amd: LBR virtualization supported vm-test-run-hermes-remote> server # [ 55.092541] kvm_amd: Virtual GIF supported vm-test-run-hermes-remote> server # [ 55.093134] kvm_amd: Virtual NMI enabled vm-test-run-hermes-remote> server # [ 55.967073] EDAC MC: Ver: 3.0.0 vm-test-run-hermes-remote> server # [ 55.378935] systemd[1]: Finished register-nix-paths.service. vm-test-run-hermes-remote> server: Guest root shell did not produce any data yet... vm-test-run-hermes-remote> server: To debug, enter the VM and run 'systemctl status backdoor.service'. vm-test-run-hermes-remote> server # [ 58.101532] systemd-vconsole-setup[515]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> server # [ 58.134091] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 58.135613] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> server # [ 58.137143] systemd[1]: Started hermes-microvm-timezone.path. vm-test-run-hermes-remote> server # [ 58.140358] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-hermes-remote> server # [ 58.141848] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-hermes-remote> server # [ 58.143282] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> server # [ 58.155426] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> server # [ 58.156636] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 58.198593] systemd[1]: Listening on dashboard forward socket for hermes-alice. vm-test-run-hermes-remote> server # [ 58.200242] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-hermes-remote> server # [ 58.210232] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-hermes-remote> server # [ 58.212069] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. vm-test-run-hermes-remote> server # [ 58.213968] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> server # [ 58.215166] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 58.225770] systemd[1]: Started backdoor.service. vm-test-run-hermes-remote> server # [ 58.261222] systemd[1]: Started Enable Kernel Same-Page Merging. vm-test-run-hermes-remote> server # [ 58.263270] systemd[1]: Starting Install MicroVM 'hermes-alice'... vm-test-run-hermes-remote> server # [ 58.280087] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-hermes-remote> server # [ 58.295492] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 58.310323] systemd[1]: Starting Post-Boot Actions... vm-test-run-hermes-remote> server # [ 58.336125] systemd[1]: Started Reset console on configuration changes. vm-test-run-hermes-remote> server # [ 58.387383] systemd[1]: Starting resolvconf update... vm-test-run-hermes-remote> server # [ 58.424362] systemd[1]: Starting SSH Host Keys Generation... vm-test-run-hermes-remote> server # [ 58.449509] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-hermes-remote> server # [ 58.690153] systemd[1]: enable-ksm.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 58.794860] systemd[1]: Finished Post-Boot Actions. vm-test-run-hermes-remote> server # [ 59.203659] nsncd[604]: Jul 31 14:21:22.847 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> server # [ 59.215286] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 59.222091] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 59.225044] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 59.233057] systemd[1]: Starting User Login Management... vm-test-run-hermes-remote> server # [ 59.241773] systemd[1]: install-microvm-hermes-alice.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 59.247033] systemd[1]: Finished Install MicroVM 'hermes-alice'. vm-test-run-hermes-remote> server # [ 59.276954] systemd[1]: Setup MicroVM 'hermes-alice' devices for passthrough skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/pci-setup vm-test-run-hermes-remote> server # [ 59.297098] systemd[1]: Starting Save MicroVM 'hermes-alice' booted configuration... vm-test-run-hermes-remote> server # [ 59.339858] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-hermes-remote> server # connecting to host... vm-test-run-hermes-remote> server # [ 59.938334] systemd-logind[638]: New seat seat0. vm-test-run-hermes-remote> server # [ 59.954984] systemd-logind[638]: Watching system buttons on /dev/input/event2 (Power Button) vm-test-run-hermes-remote> server # [ 59.956044] systemd-logind[638]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-hermes-remote> server # [ 59.956757] systemd-logind[638]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) vm-test-run-hermes-remote> server # [ 59.993221] systemd[1]: Started User Login Management. vm-test-run-hermes-remote> server # [ 60.012424] systemd[1]: Starting linger-users.service... vm-test-run-hermes-remote> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-hermes-remote> server: connected to guest root shell vm-test-run-hermes-remote> server: (connecting took 62.96 seconds) vm-test-run-hermes-remote> server: (finished: waiting for the VM to finish booting, in 62.96 seconds) vm-test-run-hermes-remote> server # [ 60.247218] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 60.247765] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-hermes-remote> server # [ 60.247972] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 60.248217] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-hermes-remote> server # [ 60.248414] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 60.298871] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 60.303702] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 60.337938] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 60.498778] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 60.500432] systemd[1]: Finished linger-users.service. vm-test-run-hermes-remote> server # [ 60.507476] dbus-broker-launch[610]: Looking up NSS user entry for 'systemd-timesync'... vm-test-run-hermes-remote> server # [ 60.515893] dbus-broker-launch[610]: NSS returned no entry for 'systemd-timesync' vm-test-run-hermes-remote> server # [ 60.517465] dbus-broker-launch[610]: Invalid user-name in /nix/store/483ic6aflfyzji6apzjqs8gf42y8vc9f-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" vm-test-run-hermes-remote> server # [ 60.751668] nsncd[702]: Jul 31 14:21:24.404 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> server # [ 61.025595] dbus-broker-launch[610]: Ready vm-test-run-hermes-remote> server # [ 61.198857] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 61.199421] systemd[1]: Started D-Bus System Message Bus. vm-test-run-hermes-remote> server # [ 61.211597] systemd[1]: Finished Save MicroVM 'hermes-alice' booted configuration. vm-test-run-hermes-remote> server # [ 61.236046] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 61.240483] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 61.243322] systemd[1]: Setup MicroVM 'hermes-alice' MACVTAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/macvtap-up vm-test-run-hermes-remote> server # [ 61.289632] systemd[1]: Starting VirtioFS daemons for MicroVM 'hermes-alice'... vm-test-run-hermes-remote> server # [ 61.452972] systemd[1]: Finished resolvconf update. vm-test-run-hermes-remote> server # [ 61.476858] systemd[1]: Starting DHCP Client... vm-test-run-hermes-remote> server # [ 61.546141] sshd-keygen-start[652]: Generating public/private rsa key pair. vm-test-run-hermes-remote> server # [ 61.546667] sshd-keygen-start[652]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key vm-test-run-hermes-remote> server # [ 61.546874] sshd-keygen-start[652]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub vm-test-run-hermes-remote> server # [ 61.547041] sshd-keygen-start[652]: The key fingerprint is: vm-test-run-hermes-remote> server # [ 61.547176] sshd-keygen-start[652]: SHA256:95biG0VPp9vPLRiyqCWsQ+v7/FBdfS5qTi2YzznVzQs root@server vm-test-run-hermes-remote> server # [ 61.547321] sshd-keygen-start[652]: The key's randomart image is: vm-test-run-hermes-remote> server # [ 61.547509] sshd-keygen-start[652]: +---[RSA 4096]----+ vm-test-run-hermes-remote> server # [ 61.547647] sshd-keygen-start[652]: | | vm-test-run-hermes-remote> server # [ 61.547791] sshd-keygen-start[652]: | . | vm-test-run-hermes-remote> server # [ 61.547922] sshd-keygen-start[652]: | o o o| vm-test-run-hermes-remote> server # [ 61.548096] sshd-keygen-start[652]: | . o o = | vm-test-run-hermes-remote> server # [ 61.548234] sshd-keygen-start[652]: | S o . +oo| vm-test-run-hermes-remote> server # [ 61.548365] sshd-keygen-start[652]: | .. . ..=.E.++| vm-test-run-hermes-remote> server # [ 61.548495] sshd-keygen-start[652]: | . .+ ..=oO++ o| vm-test-run-hermes-remote> server # [ 61.548677] sshd-keygen-start[652]: | oo +...Xoo.oo| vm-test-run-hermes-remote> server # [ 61.550246] sshd-keygen-start[652]: | .+++o. o.=. .+| vm-test-run-hermes-remote> server # [ 61.550385] sshd-keygen-start[652]: +----[SHA256]-----+ vm-test-run-hermes-remote> server # [ 62.573863] sshd-keygen-start[797]: Generating public/private ed25519 key pair. vm-test-run-hermes-remote> server # [ 62.574337] sshd-keygen-start[797]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key vm-test-run-hermes-remote> server # [ 62.574471] sshd-keygen-start[797]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub vm-test-run-hermes-remote> server # [ 62.574588] sshd-keygen-start[797]: The key fingerprint is: vm-test-run-hermes-remote> server # [ 62.574702] sshd-keygen-start[797]: SHA256:1SgK3xn6RAOXr1vg0CnMOchbY9fIYmxkYtxtzmjbZII root@server vm-test-run-hermes-remote> server # [ 62.574837] sshd-keygen-start[797]: The key's randomart image is: vm-test-run-hermes-remote> server # [ 62.574957] sshd-keygen-start[797]: +--[ED25519 256]--+ vm-test-run-hermes-remote> server # [ 62.575098] sshd-keygen-start[797]: | . ..... | vm-test-run-hermes-remote> server # [ 62.575213] sshd-keygen-start[797]: | + +o+ o | vm-test-run-hermes-remote> server # [ 62.575324] sshd-keygen-start[797]: | o.X O==o . | vm-test-run-hermes-remote> server # [ 62.575440] sshd-keygen-start[797]: | Eo^=%*o | vm-test-run-hermes-remote> server # [ 62.575551] sshd-keygen-start[797]: | B+#So | vm-test-run-hermes-remote> server # [ 62.575661] sshd-keygen-start[797]: | . .o+ . | vm-test-run-hermes-remote> server # [ 62.575785] sshd-keygen-start[797]: | .o | vm-test-run-hermes-remote> server # [ 62.575918] sshd-keygen-start[797]: | . | vm-test-run-hermes-remote> server # [ 62.576119] sshd-keygen-start[797]: | | vm-test-run-hermes-remote> server # [ 62.576248] sshd-keygen-start[797]: +----[SHA256]-----+ vm-test-run-hermes-remote> server # [ 62.648311] systemd[1]: sshd-keygen.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 62.648809] systemd[1]: Finished SSH Host Keys Generation. vm-test-run-hermes-remote> server # [ 62.736906] dhcpcd[788]: dhcpcd-10.3.2 starting vm-test-run-hermes-remote> server # [ 62.891358] dhcpcd[804]: dev: loaded udev vm-test-run-hermes-remote> server # [ 63.016850] systemd[1]: Finished Firewall. vm-test-run-hermes-remote> server # [ 63.017442] systemd[1]: Reached target Preparation for Network. vm-test-run-hermes-remote> server # [ 63.037811] systemd[1]: Starting Owner-match loopback firewall for hermes microvms... vm-test-run-hermes-remote> server # [ 63.051788] systemd[1]: Starting Address configuration of eth1... vm-test-run-hermes-remote> server # [ 63.073083] systemd[1]: Starting Extra networking commands.... vm-test-run-hermes-remote> server # [ 63.747133] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-hermes-remote> server # [ 64.031575] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-hermes-remote> server # [ 64.790466] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-hermes-remote> server # [ 64.490081] network-addresses-eth1-start[815]: adding address 192.168.1.2/24... done vm-test-run-hermes-remote> server # [ 64.743720] network-addresses-eth1-start[815]: adding address 2001:db8:1::2/64... done vm-test-run-hermes-remote> server # [ 64.932861] systemd[1]: Finished Address configuration of eth1. vm-test-run-hermes-remote> server # [ 64.963627] systemd[1]: Finished Extra networking commands.. vm-test-run-hermes-remote> server # [ 64.964190] systemd[1]: Reached target Network. vm-test-run-hermes-remote> server # [ 64.964446] systemd[1]: Setup MicroVM 'hermes-alice' TAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/tap-up vm-test-run-hermes-remote> server # [ 64.985129] systemd[1]: Starting SSH Daemon... vm-test-run-hermes-remote> server # [ 65.046112] systemd[1]: Starting Permit User Sessions... vm-test-run-hermes-remote> server # [ 65.228535] systemd[1]: Finished Permit User Sessions. vm-test-run-hermes-remote> server # [ 65.252245] systemd[1]: Started Getty on tty1. vm-test-run-hermes-remote> server # [ 65.253298] systemd[1]: Reached target Login Prompts. vm-test-run-hermes-remote> server # [ 65.457112] sshd[888]: Server listening on 0.0.0.0 port 22. vm-test-run-hermes-remote> server # [ 65.457740] systemd[1]: Started SSH Daemon. vm-test-run-hermes-remote> server # [ 65.457981] sshd[888]: Server listening on :: port 22. vm-test-run-hermes-remote> server # [ 69.083749] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-hermes-remote> server # [ 69.352567] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-hermes-remote> server # [ 69.355888] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-hermes-remote> server # [ 69.364786] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 vm-test-run-hermes-remote> server # [ 69.366570] cfg80211: failed to load regulatory.db vm-test-run-hermes-remote> server # [ 69.650078] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-hermes-remote> server # [ 68.993511] dhcpcd[804]: eth0: waiting for carrier vm-test-run-hermes-remote> server # [ 68.996622] dhcpcd[804]: eth0: carrier acquired vm-test-run-hermes-remote> server # [ 69.059764] dhcpcd[804]: DUID 00:01:00:01:31:ff:6b:ec:52:54:00:12:34:56 vm-test-run-hermes-remote> server # [ 69.060311] dhcpcd[804]: eth0: IAID 00:12:34:56 vm-test-run-hermes-remote> server # [ 69.060629] dhcpcd[804]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-hermes-remote> server # [ 69.483404] systemd[1]: Finished Owner-match loopback firewall for hermes microvms. vm-test-run-hermes-remote> server # [ 69.816554] dhcpcd[804]: eth0: soliciting a DHCP lease vm-test-run-hermes-remote> server # [ 70.968270] NET: Registered PF_PACKET protocol family vm-test-run-hermes-remote> server # [ 70.388145] dhcpcd[804]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-hermes-remote> server # [ 70.403409] dhcpcd[804]: eth0: probing address 10.0.2.15/24 vm-test-run-hermes-remote> server # [ 71.197248] dhcpcd[804]: eth0: soliciting an IPv6 router vm-test-run-hermes-remote> server # [ 71.203634] dhcpcd[804]: eth0: Router Advertisement from fe80::2 vm-test-run-hermes-remote> server # [ 71.205095] dhcpcd[804]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-hermes-remote> server # [ 71.211790] dhcpcd[804]: eth0: adding route to fec0::/64 vm-test-run-hermes-remote> server # [ 71.216272] dhcpcd[804]: eth0: adding default route via fe80::2 vm-test-run-hermes-remote> server # [ 75.765294] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:39,413 INFO Set uid to user 0 succeeded vm-test-run-hermes-remote> server # [ 75.841216] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:39,494 INFO supervisord started with pid 796 vm-test-run-hermes-remote> server # [ 75.886374] dhcpcd[804]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-hermes-remote> server # [ 75.886933] dhcpcd[804]: eth0: adding route to 10.0.2.0/24 vm-test-run-hermes-remote> server # [ 75.887212] dhcpcd[804]: eth0: adding default route via 10.0.2.2 vm-test-run-hermes-remote> server # [ 76.870439] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:40,521 INFO spawned: 'notify' with pid 1026 vm-test-run-hermes-remote> server # [ 76.883488] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:40,535 INFO spawned: 'virtiofsd-hermes-exchange' with pid 1027 vm-test-run-hermes-remote> server # [ 76.897133] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:40,549 INFO spawned: 'virtiofsd-hermes-state' with pid 1029 vm-test-run-hermes-remote> server # [ 76.911984] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:40,563 INFO spawned: 'virtiofsd-host-config' with pid 1031 vm-test-run-hermes-remote> server # [ 76.925131] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:40,577 INFO spawned: 'virtiofsd-ro-store' with pid 1033 vm-test-run-hermes-remote> server # [ 77.297037] systemd[1]: Started DHCP Client. vm-test-run-hermes-remote> server # [ 77.367973] supervisord[796]: virtiofsd-hermes-exchange [2026-07-31T14:21:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 77.368613] supervisord[796]: virtiofsd-hermes-state [2026-07-31T14:21:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 77.368831] supervisord[796]: virtiofsd-ro-store [2026-07-31T14:21:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 77.369056] supervisord[796]: virtiofsd-host-config [2026-07-31T14:21:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 77.855091] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:41,508 INFO success: notify entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 77.871182] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:41,524 INFO success: virtiofsd-hermes-exchange entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 77.884915] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:41,537 INFO success: virtiofsd-hermes-state entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 78.890256] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:42,541 INFO success: virtiofsd-host-config entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 78.890823] microvm-virtiofsd@hermes-alice[796]: 2026-07-31 14:21:42,541 INFO success: virtiofsd-ro-store entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 79.061705] systemd[1]: Started VirtioFS daemons for MicroVM 'hermes-alice'. vm-test-run-hermes-remote> server # [ 79.090038] systemd[1]: Starting MicroVM 'hermes-alice'... vm-test-run-hermes-remote> server # [ 81.328948] systemd[1]: Started MicroVM 'hermes-alice'. vm-test-run-hermes-remote> server # [ 81.332049] systemd[1]: Reached target microvms.target. vm-test-run-hermes-remote> server # [ 81.333334] systemd[1]: Reached target Multi-User System. vm-test-run-hermes-remote> server # [ 81.336617] systemd[1]: Startup finished in 2.499s (kernel) + 21.087s (initrd) + 57.749s (userspace) = 1min 21.336s. vm-test-run-hermes-remote> server: (finished: waiting for unit multi-user.target, in 85.87 seconds) vm-test-run-hermes-remote> server: waiting for unit sshd.service vm-test-run-hermes-remote> server: (finished: waiting for unit sshd.service, in 1.02 seconds) vm-test-run-hermes-remote> client: waiting for unit multi-user.target vm-test-run-hermes-remote> client: waiting for the VM to finish booting vm-test-run-hermes-remote> client: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-hermes-remote> client: connected to guest root shell vm-test-run-hermes-remote> client: (connecting took 0.00 seconds) vm-test-run-hermes-remote> client: (finished: waiting for the VM to finish booting, in 0.00 seconds) vm-test-run-hermes-remote> client: (finished: waiting for unit multi-user.target, in 0.87 seconds) vm-test-run-hermes-remote> server: must succeed: cat /etc/ssh/ssh_host_*_key.pub vm-test-run-hermes-remote> server: (finished: must succeed: cat /etc/ssh/ssh_host_*_key.pub, in 0.52 seconds) vm-test-run-hermes-remote> client: must succeed: install -d -m 0700 -o alice -g users /home/alice/.ssh vm-test-run-hermes-remote> client: (finished: must succeed: install -d -m 0700 -o alice -g users /home/alice/.ssh, in 0.06 seconds) vm-test-run-hermes-remote> client: must succeed: printf '%s' 'server ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPPpMouBcFMMHMaaJJGJ+//wslK5egmhrK6PIrAy2nrP root@server vm-test-run-hermes-remote> server ssh-rsa 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 root@server vm-test-run-hermes-remote> ' > /home/alice/.ssh/known_hosts vm-test-run-hermes-remote> client: (finished: must succeed: printf '%s' 'server ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPPpMouBcFMMHMaaJJGJ+//wslK5egmhrK6PIrAy2nrP root@server vm-test-run-hermes-remote> server ssh-rsa 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 root@server vm-test-run-hermes-remote> ' > /home/alice/.ssh/known_hosts, in 0.04 seconds) vm-test-run-hermes-remote> client: must succeed: chown alice:users /home/alice/.ssh/known_hosts vm-test-run-hermes-remote> client: (finished: must succeed: chown alice:users /home/alice/.ssh/known_hosts, in 0.05 seconds) vm-test-run-hermes-remote> client: must succeed: install -m 0400 -o alice -g users /nix/store/64imgqgf4xqk60yq94z1wqjjar324nrb-privkey.snakeoil /home/alice/.ssh/id_ed25519 vm-test-run-hermes-remote> client: (finished: must succeed: install -m 0400 -o alice -g users /nix/store/64imgqgf4xqk60yq94z1wqjjar324nrb-privkey.snakeoil /home/alice/.ssh/id_ed25519, in 0.06 seconds) vm-test-run-hermes-remote> server: waiting for unit microvm@hermes-alice.service vm-test-run-hermes-remote> server: (finished: waiting for unit microvm@hermes-alice.service, in 1.69 seconds) vm-test-run-hermes-remote> subtest: the token file mode is the whole ACL vm-test-run-hermes-remote> server: must succeed: stat -c '%U %a' /var/lib/hermes-microvm/alice/desktop-token vm-test-run-hermes-remote> server: (finished: must succeed: stat -c '%U %a' /var/lib/hermes-microvm/alice/desktop-token, in 0.54 seconds) vm-test-run-hermes-remote> (finished: subtest: the token file mode is the whole ACL, in 0.54 seconds) vm-test-run-hermes-remote> subtest: the client carries no microvm closure vm-test-run-hermes-remote> client: must fail: systemctl cat 'microvm@.service' vm-test-run-hermes-remote> client # No files found for microvm@.service. vm-test-run-hermes-remote> client: (finished: must fail: systemctl cat 'microvm@.service', in 0.40 seconds) vm-test-run-hermes-remote> client: must fail: test -e /var/lib/microvms vm-test-run-hermes-remote> client: (finished: must fail: test -e /var/lib/microvms, in 0.06 seconds) vm-test-run-hermes-remote> (finished: subtest: the client carries no microvm closure, in 0.46 seconds) vm-test-run-hermes-remote> subtest: the guest dashboard is not exposed off the server vm-test-run-hermes-remote> client: must fail: /nix/store/54yn2hdk3bnw4yl1xc01qm4y4laaggcr-curl-8.21.0-bin/bin/curl -s --max-time 5 -o /dev/null http://server:22901/api/status vm-test-run-hermes-remote> server # [ 93.744743] supervisord[796]: virtiofsd-hermes-state [2026-07-31T14:21:57Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 93.745422] supervisord[796]: virtiofsd-host-config [2026-07-31T14:21:57Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 93.745652] supervisord[796]: virtiofsd-ro-store [2026-07-31T14:21:57Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 93.746611] supervisord[796]: virtiofsd-hermes-exchange [2026-07-31T14:21:57Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 93.779345] microvm@hermes-alice[1125]: microvm@hermes-alice: warning: Number of SMP cpus requested (8) exceeds the recommended cpus supported by KVM (4) vm-test-run-hermes-remote> server # [ 93.861640] microvm@hermes-alice[1125]: microvm@hermes-alice: warning: Number of hotpluggable cpus requested (8) exceeds the recommended cpus supported by KVM (4) vm-test-run-hermes-remote> client: (finished: must fail: /nix/store/54yn2hdk3bnw4yl1xc01qm4y4laaggcr-curl-8.21.0-bin/bin/curl -s --max-time 5 -o /dev/null http://server:22901/api/status, in 5.60 seconds) vm-test-run-hermes-remote> (finished: subtest: the guest dashboard is not exposed off the server, in 5.60 seconds) vm-test-run-hermes-remote> client: must succeed: id -u alice vm-test-run-hermes-remote> client: (finished: must succeed: id -u alice, in 0.20 seconds) vm-test-run-hermes-remote> client: waiting for unit user@1000.service vm-test-run-hermes-remote> client: (finished: waiting for unit user@1000.service, in 1.00 seconds) vm-test-run-hermes-remote> subtest: the launcher opens the tunnel and prints the remote env vm-test-run-hermes-remote> client: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 hermes-desktop-remote --print-env' vm-test-run-hermes-remote> client # [ 96.495936] su[870]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 96.674808] su[870]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 97.754416] systemd[658]: Starting SSH forward to the remote hermes dashboard... vm-test-run-hermes-remote> client # [ 97.814834] systemd[658]: Started SSH forward to the remote hermes dashboard. vm-test-run-hermes-remote> server # [ 97.733294] microvm@hermes-alice[1125]: SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-hermes-remote> server # [ 99.268777] sshd-session[1168]: Accepted publickey for alice from 2001:db8:1::1 port 60468 ssh2: ED25519 SHA256:dvIRknqyjjIuB+lGouUaT4x+VncAYZFI15UvWXtIYIc vm-test-run-hermes-remote> server # [ 99.460706] sshd-session[1168]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 100.654579] systemd[1]: Created slice Slice /user/1000. vm-test-run-hermes-remote> server # [ 100.665858] systemd[1]: Starting User Runtime Directory /run/user/1000... vm-test-run-hermes-remote> server # [ 100.782121] systemd-logind[638]: New session '1' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 101.461918] systemd[1]: Finished User Runtime Directory /run/user/1000. vm-test-run-hermes-remote> server # [ 101.496140] systemd[1]: Starting User Manager for UID 1000... vm-test-run-hermes-remote> server # [ 101.498108] sshd-session[1173]: Accepted publickey for alice from 2001:db8:1::1 port 60474 ssh2: ED25519 SHA256:dvIRknqyjjIuB+lGouUaT4x+VncAYZFI15UvWXtIYIc vm-test-run-hermes-remote> server # [ 101.786145] sshd-session[1173]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 101.843202] systemd-logind[638]: New session '2' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 102.199270] (systemd)[1180]: pam_unix(systemd-user:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 102.261364] systemd-logind[638]: New session '3' of user 'alice' with class 'manager' and type 'unspecified'. vm-test-run-hermes-remote> server # [ 102.674348] systemd[1180]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> server # [ 103.701340] systemd[1180]: Queued start job for default target Main User Target. vm-test-run-hermes-remote> server # [ 103.714138] systemd[1180]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> server # [ 103.714766] systemd[1180]: Created slice User Application Slice. vm-test-run-hermes-remote> server # [ 103.715168] systemd[1180]: Started Daily Cleanup of User's Temporary Directories. vm-test-run-hermes-remote> server # [ 103.715436] systemd[1180]: Reached target Paths. vm-test-run-hermes-remote> server # [ 103.715795] systemd[1180]: Reached target Timers. vm-test-run-hermes-remote> server # [ 103.739871] systemd[1180]: Starting D-Bus User Message Bus Socket... vm-test-run-hermes-remote> server # [ 103.755992] systemd[1180]: Starting Create User Files and Directories... vm-test-run-hermes-remote> server # [ 103.860899] systemd[1180]: Finished Create User Files and Directories. vm-test-run-hermes-remote> server # [ 104.090606] systemd[1180]: Listening on D-Bus User Message Bus Socket. vm-test-run-hermes-remote> server # [ 104.091347] systemd[1180]: Reached target Sockets. vm-test-run-hermes-remote> server # [ 104.091580] systemd[1180]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 104.092081] systemd[1]: Started User Manager for UID 1000. vm-test-run-hermes-remote> server # [ 104.109168] systemd[1180]: Starting Run user-specific NixOS activation... vm-test-run-hermes-remote> server # [ 104.109943] systemd[1]: Started Session 1 of User alice. vm-test-run-hermes-remote> server # [ 104.116609] systemd[1]: Started Session 2 of User alice. vm-test-run-hermes-remote> server # [ 104.291702] sshd-session[1195]: Received disconnect from 2001:db8:1::1 port 60474:11: disconnected by user vm-test-run-hermes-remote> client # hermes-desktop-remote: this prints the dashboard token, which never expires. Keep it out of scrollback, logs and bug reports. vm-test-run-hermes-remote> server # [ 104.292373] sshd-session[1195]: Disconnected from user alice 2001:db8:1::1 port 60474 vm-test-run-hermes-remote> server # [ 104.307871] sshd-session[1173]: pam_unix(sshd:session): session closed for user alice vm-test-run-hermes-remote> client # [ 104.856169] su[870]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> server # [ 104.331074] systemd[1180]: Finished Run user-specific NixOS activation. vm-test-run-hermes-remote> server # [ 104.331664] systemd[1180]: Reached target Main User Target. vm-test-run-hermes-remote> server # [ 104.331937] systemd[1180]: Startup finished in 1.735s. vm-test-run-hermes-remote> server # [ 104.371596] systemd[1]: session-2.scope: Deactivated successfully. vm-test-run-hermes-remote> server # [ 104.389779] systemd-logind[638]: Session 2 logged out. Waiting for processes to exit. vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 hermes-desktop-remote --print-env', in 9.30 seconds) vm-test-run-hermes-remote> server: must succeed: cat /var/lib/hermes-microvm/alice/desktop-token vm-test-run-hermes-remote> server # [ 104.398644] systemd-logind[638]: Removed session 2. vm-test-run-hermes-remote> server: (finished: must succeed: cat /var/lib/hermes-microvm/alice/desktop-token, in 0.18 seconds) vm-test-run-hermes-remote> client: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 systemctl --user is-active hermes-remote-tunnel.service' vm-test-run-hermes-remote> client # [ 105.248768] su[916]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 105.366441] su[916]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 105.533967] su[916]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 systemctl --user is-active hermes-remote-tunnel.service', in 0.49 seconds) vm-test-run-hermes-remote> (finished: subtest: the launcher opens the tunnel and prints the remote env, in 9.98 seconds) vm-test-run-hermes-remote> subtest: the local forward stays on loopback vm-test-run-hermes-remote> client: must succeed: /nix/store/hs7f3v7j8z1w8xagq72y3510d2ad65n2-iproute2-7.1.0/bin/ss -Hltn 'sport = :23901' vm-test-run-hermes-remote> server # [ 105.636678] microvm@hermes-alice[1125]: Booting from ROM... vm-test-run-hermes-remote> server # [ 105.642921] microvm@hermes-alice[1125]: PPrroobbiinngg EEDDDD ((eedddd==ooffff ttoo ddiissaabbllee))...... ook vm-test-run-hermes-remote> server # [ 106.179900] microvm@hermes-alice[1125]: No EFI environment detected. vm-test-run-hermes-remote> server # [ 106.185901] microvm@hermes-alice[1125]: early console in extract_kernel vm-test-run-hermes-remote> server # [ 106.190870] microvm@hermes-alice[1125]: input_data: 0x0000000003acf2cc vm-test-run-hermes-remote> server # [ 106.197893] microvm@hermes-alice[1125]: input_len: 0x0000000000cb13c8 vm-test-run-hermes-remote> client: (finished: must succeed: /nix/store/hs7f3v7j8z1w8xagq72y3510d2ad65n2-iproute2-7.1.0/bin/ss -Hltn 'sport = :23901', in 1.13 seconds) vm-test-run-hermes-remote> (finished: subtest: the local forward stays on loopback, in 1.13 seconds) vm-test-run-hermes-remote> subtest: the guest dashboard answers /api/status through the tunnel vm-test-run-hermes-remote> client: waiting for success: /nix/store/54yn2hdk3bnw4yl1xc01qm4y4laaggcr-curl-8.21.0-bin/bin/curl -sf -o /dev/null http://127.0.0.1:23901/api/status vm-test-run-hermes-remote> server # [ 106.205219] microvm@hermes-alice[1125]: output: 0x0000000001000000 vm-test-run-hermes-remote> server # [ 106.205791] microvm@hermes-alice[1125]: output_len: 0x000000000372858c vm-test-run-hermes-remote> server # [ 106.209860] microvm@hermes-alice[1125]: kernel_total_size: 0x0000000002e30000 vm-test-run-hermes-remote> server # [ 106.214187] microvm@hermes-alice[1125]: needed_size: 0x0000000003800000 vm-test-run-hermes-remote> server # [ 106.217897] microvm@hermes-alice[1125]: trampoline_32bit: 0x0000000000000000 vm-test-run-hermes-remote> server # [ 106.229532] microvm@hermes-alice[1125]: Physical KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 106.229782] microvm@hermes-alice[1125]: Virtual KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 106.232105] microvm@hermes-alice[1125]: vm-test-run-hermes-remote> server # [ 106.235871] microvm@hermes-alice[1125]: Decompressing Linux... No EFI environment detected. vm-test-run-hermes-remote> server # [ 106.463452] systemd[1]: Created slice Slice /system/hermes-dashboard-fwd-alice. vm-test-run-hermes-remote> server # [ 106.508927] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38562). vm-test-run-hermes-remote> server # [ 107.681331] microvm@hermes-alice[1125]: Parsing ELF... Performing relocations... done. vm-test-run-hermes-remote> server # [ 107.685892] microvm@hermes-alice[1125]: Booting the kernel (entry_offset: 0x0000000002788520). vm-test-run-hermes-remote> server # [ 107.729902] microvm@hermes-alice[1125]: [ 0.000000] Linux version 6.18.39 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 18 14:53:38 UTC 2026 vm-test-run-hermes-remote> server # [ 107.764912] microvm@hermes-alice[1125]: [ 0.000000] Command line: earlyprintk=ttyS0 console=ttyS0 reboot=t panic=-1 8250.nr_uarts=1 8250.nr_uarts=1 root=fstab loglevel=4 lsm=landlock,yama,bpf init=/nix/store/p4b8ns2qbi61zirlqz1frv3hngfdxasd-nixos-system-hermes-alice-26.11pre-git/init regInfo=/nix/store/f15yqrsnc040qd97v5j8ff27s8dwz0sy-closure-info/registration vm-test-run-hermes-remote> server # [ 107.772870] microvm@hermes-alice[1125]: [ 0.000000] BIOS-provided physical RAM map: vm-test-run-hermes-remote> server # [ 107.782911] microvm@hermes-alice[1125]: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-hermes-remote> server # [ 107.793902] microvm@hermes-alice[1125]: [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-hermes-remote> server # [ 107.800111] microvm@hermes-alice[1125]: [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-hermes-remote> server # [ 107.805920] microvm@hermes-alice[1125]: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfffdfff] usable vm-test-run-hermes-remote> server # [ 107.815212] microvm@hermes-alice[1125]: [ 0.000000] BIOS-e820: [mem 0x00000000bfffe000-0x00000000bfffffff] reserved vm-test-run-hermes-remote> server # [ 107.820944] microvm@hermes-alice[1125]: [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-hermes-remote> server # [ 107.829907] microvm@hermes-alice[1125]: [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-hermes-remote> server # [ 107.839931] microvm@hermes-alice[1125]: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable vm-test-run-hermes-remote> server # [ 107.840545] microvm@hermes-alice[1125]: [ 0.000000] printk: legacy bootconsole [earlyser0] enabled vm-test-run-hermes-remote> server # [ 107.854991] microvm@hermes-alice[1125]: Memory KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 109.758541] systemd[1]: hermes-dashboard-fwd-alice@0-1-127.0.0.1:22901-127.0.0.1:38562.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 109.761642] systemd[1]: hermes-dashboard-fwd-alice@0-1-127.0.0.1:22901-127.0.0.1:38562.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 111.189322] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38576). vm-test-run-hermes-remote> server # [ 111.930390] microvm@hermes-alice[1125]: Poking KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 112.841828] microvm@hermes-alice[1125]: [ 4.488383] PCI: Fatal: No config space access function found vm-test-run-hermes-remote> server # [ 114.167927] systemd[1]: hermes-dashboard-fwd-alice@1-2-127.0.0.1:22901-127.0.0.1:38576.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 114.176582] systemd[1]: hermes-dashboard-fwd-alice@1-2-127.0.0.1:22901-127.0.0.1:38576.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 115.966159] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35288). vm-test-run-hermes-remote> server # [ 118.197081] systemd[1]: hermes-dashboard-fwd-alice@2-4097-127.0.0.1:22901-127.0.0.1:35288.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 118.197764] systemd[1]: hermes-dashboard-fwd-alice@2-4097-127.0.0.1:22901-127.0.0.1:35288.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 119.658146] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35298). vm-test-run-hermes-remote> server # [ 120.440726] microvm@hermes-alice[1125]: +q6E616D65Booting initrd of NixOS 26.11 (Zokor) (Initrd). vm-test-run-hermes-remote> server # [ 121.344403] microvm@hermes-alice[1125]: [ OK ] Created slice Slice /system/modprobe. vm-test-run-hermes-remote> server # [ 121.353569] microvm@hermes-alice[1125]: [ OK ] Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 121.367528] microvm@hermes-alice[1125]: [ OK ] Reached target Initrd Root Device. vm-test-run-hermes-remote> server # [ 121.367729] microvm@hermes-alice[1125]: [ OK ] Reached target Path Units. vm-test-run-hermes-remote> server # [ 121.373233] microvm@hermes-alice[1125]: [ OK ] Reached target Slice Units. vm-test-run-hermes-remote> server # [ 121.377488] microvm@hermes-alice[1125]: [ OK ] Reached target Swaps. vm-test-run-hermes-remote> server # [ 121.383857] microvm@hermes-alice[1125]: [ OK ] Reached target Timer Units. vm-test-run-hermes-remote> server # [ 121.401515] microvm@hermes-alice[1125]: [ OK ] Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 121.410306] microvm@hermes-alice[1125]: [ OK ] Listening on Journal Socket (/dev/log). vm-test-run-hermes-remote> server # [ 121.414945] microvm@hermes-alice[1125]: [ OK ] Listening on Journal Sockets. vm-test-run-hermes-remote> server # [ 121.426343] microvm@hermes-alice[1125]: [ OK ] Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 121.436400] microvm@hermes-alice[1125]: [ OK ] Listening on udev Kernel Socket. vm-test-run-hermes-remote> server # [ 121.447373] microvm@hermes-alice[1125]: [ OK ] Reached target Socket Units. vm-test-run-hermes-remote> server # [ 121.456264] microvm@hermes-alice[1125]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 121.477935] microvm@hermes-alice[1125]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 121.579317] microvm@hermes-alice[1125]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 121.583081] microvm@hermes-alice[1125]: Starting Load Kernel Modules... vm-test-run-hermes-remote> server # [ 121.603889] microvm@hermes-alice[1125]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 121.606084] microvm@hermes-alice[1125]: [ OK ] Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 121.621871] microvm@hermes-alice[1125]: [ OK ] Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 121.649848] microvm@hermes-alice[1125]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 121.765874] microvm@hermes-alice[1125]: [ OK ] Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 121.797094] microvm@hermes-alice[1125]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 121.939859] microvm@hermes-alice[1125]: [ OK ] Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 121.967344] microvm@hermes-alice[1125]: [ OK ] Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 121.989151] systemd[1]: hermes-dashboard-fwd-alice@3-4098-127.0.0.1:22901-127.0.0.1:35298.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 121.995068] systemd[1]: hermes-dashboard-fwd-alice@3-4098-127.0.0.1:22901-127.0.0.1:35298.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 122.006112] microvm@hermes-alice[1125]: [ OK ] Reached target Local File Systems. vm-test-run-hermes-remote> server # [ 122.106872] microvm@hermes-alice[1125]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 122.283293] microvm@hermes-alice[1125]: [ OK ] Finished Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 122.291984] microvm@hermes-alice[1125]: [ OK ] Started Journal Service. vm-test-run-hermes-remote> server # [ 122.347090] microvm@hermes-alice[1125]: Starting Create System Files and Directories... vm-test-run-hermes-remote> server # [ 122.431347] microvm@hermes-alice[1125]: [ OK ] Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 122.617506] microvm@hermes-alice[1125]: Mounting /sysroot... vm-test-run-hermes-remote> server # [ 122.726305] microvm@hermes-alice[1125]: [ OK ] Mounted /sysroot. vm-test-run-hermes-remote> server # [ 122.752742] microvm@hermes-alice[1125]: [ OK ] Reached target Initrd Root File System. vm-test-run-hermes-remote> server # [ 122.772835] microvm@hermes-alice[1125]: Mounting /sysroot/run... vm-test-run-hermes-remote> server # [ 122.796045] microvm@hermes-alice[1125]: Starting Mountpoints Configured in the Real Root... vm-test-run-hermes-remote> server # [ 122.856972] microvm@hermes-alice[1125]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 122.893086] microvm@hermes-alice[1125]: [ OK ] Mounted /sysroot/run. vm-test-run-hermes-remote> server # [ 122.919622] microvm@hermes-alice[1125]: [ OK ] Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 123.025058] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35302). vm-test-run-hermes-remote> server # [ 123.686414] microvm@hermes-alice[1125]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 123.756524] microvm@hermes-alice[1125]: [ OK ] Finished Mountpoints Configured in the Real Root. vm-test-run-hermes-remote> server # [ 123.778052] microvm@hermes-alice[1125]: [ OK ] Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 123.864336] microvm@hermes-alice[1125]: [ OK ] Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 124.715900] microvm@hermes-alice[1125]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 124.972859] microvm@hermes-alice[1125]: [ OK ] Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 125.372245] systemd[1]: hermes-dashboard-fwd-alice@4-3-127.0.0.1:22901-127.0.0.1:35302.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 125.376883] systemd[1]: hermes-dashboard-fwd-alice@4-3-127.0.0.1:22901-127.0.0.1:35302.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 126.663284] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58712). vm-test-run-hermes-remote> server # [ 127.224659] microvm@hermes-alice[1125]: [* ] A start job is running for Load Kernel Modules (5s / 1min 30s) vm-test-run-hermes-remote> server # [ 127.721917] microvm@hermes-alice[1125]: [** ] A start job is running for Load Kernel Modules (6s / 1min 30s) vm-test-run-hermes-remote> server # [ 128.231378] microvm@hermes-alice[1125]: [*** ] A start job is running for Load Kernel Modules (6s / 1min 30s) vm-test-run-hermes-remote> server # [ 128.731922] microvm@hermes-alice[1125]: [ *** ] A start job is running for Load Kernel Modules (7s / 1min 30s) vm-test-run-hermes-remote> server # [ 128.906071] systemd[1]: hermes-dashboard-fwd-alice@5-4099-127.0.0.1:22901-127.0.0.1:58712.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 128.907266] systemd[1]: hermes-dashboard-fwd-alice@5-4099-127.0.0.1:22901-127.0.0.1:58712.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 129.222650] microvm@hermes-alice[1125]: [ *** ] A start job is running for Load Kernel Modules (7s / 1min 30s) vm-test-run-hermes-remote> server # [ 129.744244] microvm@hermes-alice[1125]: [ ***] A start job is running for Load Kernel Modules (8s / 1min 30s) vm-test-run-hermes-remote> server # [ 130.035671] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58728). vm-test-run-hermes-remote> server # [ 130.226985] microvm@hermes-alice[1125]: [ **] A start job is running for Load Kernel Modules (8s / 1min 30s) vm-test-run-hermes-remote> server # [ 130.724726] microvm@hermes-alice[1125]: [ *] A start job is running for Load Kernel Modules (9s / 1min 30s) vm-test-run-hermes-remote> server # [ 131.225895] microvm@hermes-alice[1125]: [ **] A start job is running for Load Kernel Modules (9s / 1min 30s) vm-test-run-hermes-remote> server # [ 131.737601] microvm@hermes-alice[1125]: [ ***] A start job is running for Load Kernel Modules (10s / 1min 30s) vm-test-run-hermes-remote> server # [ 132.043569] microvm@hermes-alice[1125]: [ OK ] Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 132.084831] microvm@hermes-alice[1125]: Mounting /sysroot/nix/.ro-store... vm-test-run-hermes-remote> server # [ 132.113151] microvm@hermes-alice[1125]: Mounting /sysroot/run/hermes-host... vm-test-run-hermes-remote> server # [ 132.163532] microvm@hermes-alice[1125]: Mounting /sysroot/var/lib/hermes... vm-test-run-hermes-remote> server # [ 132.204128] microvm@hermes-alice[1125]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 132.228600] microvm@hermes-alice[1125]: [ OK ] Mounted /sysroot/run/hermes-host. vm-test-run-hermes-remote> server # [ 132.305255] microvm@hermes-alice[1125]: [ OK ] Mounted /sysroot/var/lib/hermes. vm-test-run-hermes-remote> server # [ 132.327903] microvm@hermes-alice[1125]: [ OK ] Mounted /sysroot/nix/.ro-store. vm-test-run-hermes-remote> server # [ 132.344426] microvm@hermes-alice[1125]: [ OK ] Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 132.378847] microvm@hermes-alice[1125]: [ OK ] Reached target System Initialization. vm-test-run-hermes-remote> server # [ 132.396116] microvm@hermes-alice[1125]: [ OK ] Reached target Basic System. vm-test-run-hermes-remote> server # [ 132.436750] microvm@hermes-alice[1125]: Mounting /sysroot/nix/store... vm-test-run-hermes-remote> server # [ 132.458871] systemd[1]: hermes-dashboard-fwd-alice@6-4-127.0.0.1:22901-127.0.0.1:58728.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 132.472991] systemd[1]: hermes-dashboard-fwd-alice@6-4-127.0.0.1:22901-127.0.0.1:58728.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 132.505963] microvm@hermes-alice[1125]: [ OK ] Mounted /sysroot/nix/store. vm-test-run-hermes-remote> server # [ 132.519881] microvm@hermes-alice[1125]: [ OK ] Reached target Initrd File Systems. vm-test-run-hermes-remote> server # [ 132.528474] microvm@hermes-alice[1125]: Starting Find NixOS closure... vm-test-run-hermes-remote> server # [ 132.554873] microvm@hermes-alice[1125]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-hermes-remote> server # [ 132.600126] microvm@hermes-alice[1125]: [ OK ] Finished Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 132.798494] microvm@hermes-alice[1125]: [ OK ] Finished Find NixOS closure. vm-test-run-hermes-remote> server # [ 132.813973] microvm@hermes-alice[1125]: [ OK ] Reached target Initrd Default Target. vm-test-run-hermes-remote> server # [ 132.822846] microvm@hermes-alice[1125]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-hermes-remote> server # [ 132.867515] microvm@hermes-alice[1125]: [ OK ] Stopped target Initrd Default Target. vm-test-run-hermes-remote> server # [ 132.870940] microvm@hermes-alice[1125]: [ OK ] Stopped target Basic System. vm-test-run-hermes-remote> server # [ 132.879465] microvm@hermes-alice[1125]: [ OK ] Stopped target Initrd Root Device. vm-test-run-hermes-remote> server # [ 132.889088] microvm@hermes-alice[1125]: [ OK ] Stopped target Path Units. vm-test-run-hermes-remote> server # [ 132.897510] microvm@hermes-alice[1125]: [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 132.913841] microvm@hermes-alice[1125]: [ OK ] Stopped target Slice Units. vm-test-run-hermes-remote> server # [ 132.922655] microvm@hermes-alice[1125]: [ OK ] Stopped target Socket Units. vm-test-run-hermes-remote> server # [ 132.932389] microvm@hermes-alice[1125]: [ OK ] Stopped target System Initialization. vm-test-run-hermes-remote> server # [ 132.942269] microvm@hermes-alice[1125]: [ OK ] Stopped target Swaps. vm-test-run-hermes-remote> server # [ 132.955384] microvm@hermes-alice[1125]: [ OK ] Stopped target Timer Units. vm-test-run-hermes-remote> server # [ 132.962058] microvm@hermes-alice[1125]: [ OK ] Closed D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 132.968725] microvm@hermes-alice[1125]: [ OK ] Stopped Find NixOS closure. vm-test-run-hermes-remote> server # [ 132.980193] microvm@hermes-alice[1125]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 132.993064] microvm@hermes-alice[1125]: [ OK ] Stopped Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 133.006990] microvm@hermes-alice[1125]: [ OK ] Stopped Load Kernel Modules. vm-test-run-hermes-remote> server # [ 133.021450] microvm@hermes-alice[1125]: [ OK ] Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 133.033372] microvm@hermes-alice[1125]: [ OK ] Stopped Create System Files and Directories. vm-test-run-hermes-remote> server # [ 133.048839] microvm@hermes-alice[1125]: [ OK ] Stopped target Local File Systems. vm-test-run-hermes-remote> server # [ 133.057879] microvm@hermes-alice[1125]: [ OK ] Stopped target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 133.069828] microvm@hermes-alice[1125]: [ OK ] Stopped Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 133.089436] microvm@hermes-alice[1125]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 133.097937] microvm@hermes-alice[1125]: [ OK ] Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 133.111978] microvm@hermes-alice[1125]: [ OK ] Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 133.139932] microvm@hermes-alice[1125]: [ OK ] Stopped Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 133.150897] microvm@hermes-alice[1125]: [ OK ] Finished Cleaning Up and Shutting Down Daemons. vm-test-run-hermes-remote> server # [ 133.167196] microvm@hermes-alice[1125]: [ OK ] Closed udev Control Socket. vm-test-run-hermes-remote> server # [ 133.179940] microvm@hermes-alice[1125]: Starting Cleanup udev Database... vm-test-run-hermes-remote> server # [ 133.186304] microvm@hermes-alice[1125]: [ OK ] Stopped Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 133.191832] microvm@hermes-alice[1125]: [ OK ] Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 133.200298] microvm@hermes-alice[1125]: [ OK ] Stopped Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 133.263346] microvm@hermes-alice[1125]: [ OK ] Finished Cleanup udev Database. vm-test-run-hermes-remote> server # [ 133.278036] microvm@hermes-alice[1125]: [ OK ] Reached target Switch Root. vm-test-run-hermes-remote> server # [ 133.296208] microvm@hermes-alice[1125]: Starting NixOS Activation... vm-test-run-hermes-remote> server # [ 134.135154] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49050). vm-test-run-hermes-remote> server # [ 135.331487] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (2s / no limit) vm-test-run-hermes-remote> server # [ 135.728846] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (2s / no limit) vm-test-run-hermes-remote> server # [ 136.224897] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (3s / no limit) vm-test-run-hermes-remote> server # [ 136.662193] systemd[1]: hermes-dashboard-fwd-alice@7-8193-127.0.0.1:22901-127.0.0.1:49050.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 136.662781] systemd[1]: hermes-dashboard-fwd-alice@7-8193-127.0.0.1:22901-127.0.0.1:49050.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 136.726640] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (3s / no limit) vm-test-run-hermes-remote> server # [ 137.225990] microvm@hermes-alice[1125]: [* ] A start job is running for NixOS Activation (4s / no limit) vm-test-run-hermes-remote> server # [ 137.724643] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (4s / no limit) vm-test-run-hermes-remote> server # [ 137.804544] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49062). vm-test-run-hermes-remote> server # [ 138.230308] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (5s / no limit) vm-test-run-hermes-remote> server # [ 138.723837] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (5s / no limit) vm-test-run-hermes-remote> server # [ 139.226058] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (6s / no limit) vm-test-run-hermes-remote> server # [ 139.754425] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (6s / no limit) vm-test-run-hermes-remote> server # [ 140.223274] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (7s / no limit) vm-test-run-hermes-remote> server # [ 140.238385] systemd[1]: hermes-dashboard-fwd-alice@8-12289-127.0.0.1:22901-127.0.0.1:49062.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 140.239808] systemd[1]: hermes-dashboard-fwd-alice@8-12289-127.0.0.1:22901-127.0.0.1:49062.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 140.670090] microvm@hermes-alice[1125]: [ *] A start job is running for NixOS Activation (7s / no limit) vm-test-run-hermes-remote> server # [ 141.223183] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (8s / no limit) vm-test-run-hermes-remote> server # [ 141.306554] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49072). vm-test-run-hermes-remote> server # [ 141.724516] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (8s / no limit) vm-test-run-hermes-remote> server # [ 142.224304] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (9s / no limit) vm-test-run-hermes-remote> server # [ 142.727119] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (9s / no limit) vm-test-run-hermes-remote> server # [ 143.229846] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (10s / no limit) vm-test-run-hermes-remote> server # [ 143.686719] systemd[1]: hermes-dashboard-fwd-alice@9-8194-127.0.0.1:22901-127.0.0.1:49072.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 143.691820] systemd[1]: hermes-dashboard-fwd-alice@9-8194-127.0.0.1:22901-127.0.0.1:49072.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 143.724791] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (10s / no limit) vm-test-run-hermes-remote> server # [ 144.224431] microvm@hermes-alice[1125]: [* ] A start job is running for NixOS Activation (11s / no limit) vm-test-run-hermes-remote> server # [ 144.726346] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (11s / no limit) vm-test-run-hermes-remote> server # [ 144.987726] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42150). vm-test-run-hermes-remote> server # [ 145.231973] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (12s / no limit) vm-test-run-hermes-remote> server # [ 145.730473] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (12s / no limit) vm-test-run-hermes-remote> server # [ 146.224858] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (13s / no limit) vm-test-run-hermes-remote> server # [ 146.722190] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (13s / no limit) vm-test-run-hermes-remote> server # [ 147.225574] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (14s / no limit) vm-test-run-hermes-remote> server # [ 147.339266] systemd[1]: hermes-dashboard-fwd-alice@10-5-127.0.0.1:22901-127.0.0.1:42150.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 147.339793] systemd[1]: hermes-dashboard-fwd-alice@10-5-127.0.0.1:22901-127.0.0.1:42150.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 147.722128] microvm@hermes-alice[1125]: [ *] A start job is running for NixOS Activation (14s / no limit) vm-test-run-hermes-remote> server # [ 148.232949] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (15s / no limit) vm-test-run-hermes-remote> server # [ 148.728923] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (15s / no limit) vm-test-run-hermes-remote> server # [ 149.204383] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42152). vm-test-run-hermes-remote> server # [ 149.224507] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (16s / no limit) vm-test-run-hermes-remote> server # [ 149.724779] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (16s / no limit) vm-test-run-hermes-remote> server # [ 150.234377] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (17s / no limit) vm-test-run-hermes-remote> server # [ 150.725392] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (17s / no limit) vm-test-run-hermes-remote> server # [ 151.236315] microvm@hermes-alice[1125]: [* ] A start job is running for NixOS Activation (18s / no limit) vm-test-run-hermes-remote> server # [ 151.586550] systemd[1]: hermes-dashboard-fwd-alice@11-6-127.0.0.1:22901-127.0.0.1:42152.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 151.589300] systemd[1]: hermes-dashboard-fwd-alice@11-6-127.0.0.1:22901-127.0.0.1:42152.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 151.727343] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (18s / no limit) vm-test-run-hermes-remote> server # [ 152.222838] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (19s / no limit) vm-test-run-hermes-remote> server # [ 152.721981] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (19s / no limit) vm-test-run-hermes-remote> server # [ 152.919094] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42164). vm-test-run-hermes-remote> server # [ 153.158307] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (20s / no limit) vm-test-run-hermes-remote> server # [ 153.725391] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (20s / no limit) vm-test-run-hermes-remote> server # [ 154.122071] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (21s / no limit) vm-test-run-hermes-remote> server # [ 154.477121] microvm@hermes-alice[1125]: [ *] A start job is running for NixOS Activation (21s / no limit) vm-test-run-hermes-remote> server # [ 154.975620] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (22s / no limit) vm-test-run-hermes-remote> server # [ 155.476501] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (22s / no limit) vm-test-run-hermes-remote> server # [ 155.653265] systemd[1]: hermes-dashboard-fwd-alice@12-4100-127.0.0.1:22901-127.0.0.1:42164.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 155.653829] systemd[1]: hermes-dashboard-fwd-alice@12-4100-127.0.0.1:22901-127.0.0.1:42164.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 155.978077] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (23s / no limit) vm-test-run-hermes-remote> server # [ 156.477080] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (23s / no limit) vm-test-run-hermes-remote> server # [ 156.875152] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46964). vm-test-run-hermes-remote> server # [ 156.979379] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (24s / no limit) vm-test-run-hermes-remote> server # [ 157.473479] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (24s / no limit) vm-test-run-hermes-remote> server # [ 157.986569] microvm@hermes-alice[1125]: [* ] A start job is running for NixOS Activation (25s / no limit) vm-test-run-hermes-remote> server # [ 158.488835] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (25s / no limit) vm-test-run-hermes-remote> server # [ 158.975978] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (26s / no limit) vm-test-run-hermes-remote> server # [ 159.258827] systemd[1]: hermes-dashboard-fwd-alice@13-7-127.0.0.1:22901-127.0.0.1:46964.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 159.259480] systemd[1]: hermes-dashboard-fwd-alice@13-7-127.0.0.1:22901-127.0.0.1:46964.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 159.474423] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (26s / no limit) vm-test-run-hermes-remote> server # [ 159.982095] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (27s / no limit) vm-test-run-hermes-remote> server # [ 160.460622] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46972). vm-test-run-hermes-remote> server # [ 160.484088] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (27s / no limit) vm-test-run-hermes-remote> server # [ 160.973428] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (28s / no limit) vm-test-run-hermes-remote> server # [ 161.475527] microvm@hermes-alice[1125]: [ *] A start job is running for NixOS Activation (28s / no limit) vm-test-run-hermes-remote> server # [ 161.975388] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (29s / no limit) vm-test-run-hermes-remote> server # [ 162.472881] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (29s / no limit) vm-test-run-hermes-remote> server # [ 162.713813] systemd[1]: hermes-dashboard-fwd-alice@14-8195-127.0.0.1:22901-127.0.0.1:46972.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 162.716432] systemd[1]: hermes-dashboard-fwd-alice@14-8195-127.0.0.1:22901-127.0.0.1:46972.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 162.975618] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (30s / no limit) vm-test-run-hermes-remote> server # [ 163.477075] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (30s / no limit) vm-test-run-hermes-remote> server # [ 163.977355] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (31s / no limit) vm-test-run-hermes-remote> server # [ 164.143202] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46634). vm-test-run-hermes-remote> server # [ 164.476138] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (31s / no limit) vm-test-run-hermes-remote> server # [ 164.972220] microvm@hermes-alice[1125]: [* ] A start job is running for NixOS Activation (32s / no limit) vm-test-run-hermes-remote> server # [ 165.473667] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (32s / no limit) vm-test-run-hermes-remote> server # [ 165.977271] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (33s / no limit) vm-test-run-hermes-remote> server # [ 166.471894] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (33s / no limit) vm-test-run-hermes-remote> server # [ 166.672174] systemd[1]: hermes-dashboard-fwd-alice@15-12290-127.0.0.1:22901-127.0.0.1:46634.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 166.672721] systemd[1]: hermes-dashboard-fwd-alice@15-12290-127.0.0.1:22901-127.0.0.1:46634.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 166.975571] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (34s / no limit) vm-test-run-hermes-remote> server # [ 167.473860] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (34s / no limit) vm-test-run-hermes-remote> server # [ 167.977775] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (35s / no limit) vm-test-run-hermes-remote> server # [ 167.988385] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46640). vm-test-run-hermes-remote> server # [ 168.474864] microvm@hermes-alice[1125]: [ *] A start job is running for NixOS Activation (35s / no limit) vm-test-run-hermes-remote> server # [ 168.988884] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (36s / no limit) vm-test-run-hermes-remote> server # [ 169.477827] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (36s / no limit) vm-test-run-hermes-remote> server # [ 169.973264] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (37s / no limit) vm-test-run-hermes-remote> server # [ 170.472619] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (37s / no limit) vm-test-run-hermes-remote> server # [ 170.544234] systemd[1]: hermes-dashboard-fwd-alice@16-8196-127.0.0.1:22901-127.0.0.1:46640.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 170.547674] systemd[1]: hermes-dashboard-fwd-alice@16-8196-127.0.0.1:22901-127.0.0.1:46640.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 170.975623] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (38s / no limit) vm-test-run-hermes-remote> server # [ 171.474593] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (38s / no limit) vm-test-run-hermes-remote> server # [ 171.808253] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46654). vm-test-run-hermes-remote> server # [ 171.971953] microvm@hermes-alice[1125]: [* ] A start job is running for NixOS Activation (39s / no limit) vm-test-run-hermes-remote> server # [ 172.475524] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (39s / no limit) vm-test-run-hermes-remote> server # [ 172.976901] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (40s / no limit) vm-test-run-hermes-remote> server # [ 173.474890] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (40s / no limit) vm-test-run-hermes-remote> server # [ 173.974432] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (41s / no limit) vm-test-run-hermes-remote> server # [ 174.096175] systemd[1]: hermes-dashboard-fwd-alice@17-12291-127.0.0.1:22901-127.0.0.1:46654.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 174.096818] systemd[1]: hermes-dashboard-fwd-alice@17-12291-127.0.0.1:22901-127.0.0.1:46654.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 174.473963] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (41s / no limit) vm-test-run-hermes-remote> server # [ 174.977296] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (42s / no limit) vm-test-run-hermes-remote> server # [ 175.404962] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40900). vm-test-run-hermes-remote> server # [ 175.472503] microvm@hermes-alice[1125]: [ *] A start job is running for NixOS Activation (42s / no limit) vm-test-run-hermes-remote> server # [ 175.972761] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (43s / no limit) vm-test-run-hermes-remote> server # [ 176.482466] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (43s / no limit) vm-test-run-hermes-remote> server # [ 176.980939] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (44s / no limit) vm-test-run-hermes-remote> server # [ 177.472312] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (44s / no limit) vm-test-run-hermes-remote> server # [ 177.818573] systemd[1]: hermes-dashboard-fwd-alice@18-8-127.0.0.1:22901-127.0.0.1:40900.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 177.819760] systemd[1]: hermes-dashboard-fwd-alice@18-8-127.0.0.1:22901-127.0.0.1:40900.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 177.982379] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (45s / no limit) vm-test-run-hermes-remote> server # [ 178.476106] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (45s / no limit) vm-test-run-hermes-remote> server # [ 178.975859] microvm@hermes-alice[1125]: [* ] A start job is running for NixOS Activation (46s / no limit) vm-test-run-hermes-remote> server # [ 179.207146] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40916). vm-test-run-hermes-remote> server # [ 179.478225] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (46s / no limit) vm-test-run-hermes-remote> server # [ 179.977828] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (47s / no limit) vm-test-run-hermes-remote> server # [ 180.475836] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (47s / no limit) vm-test-run-hermes-remote> server # [ 180.973597] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (48s / no limit) vm-test-run-hermes-remote> server # [ 181.423645] systemd[1]: hermes-dashboard-fwd-alice@19-8197-127.0.0.1:22901-127.0.0.1:40916.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 181.426374] systemd[1]: hermes-dashboard-fwd-alice@19-8197-127.0.0.1:22901-127.0.0.1:40916.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 181.475112] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (48s / no limit) vm-test-run-hermes-remote> server # [ 182.002154] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (49s / no limit) vm-test-run-hermes-remote> server # [ 182.472263] microvm@hermes-alice[1125]: [ *] A start job is running for NixOS Activation (49s / no limit) vm-test-run-hermes-remote> server # [ 182.879287] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40932). vm-test-run-hermes-remote> server # [ 182.978070] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (50s / no limit) vm-test-run-hermes-remote> server # [ 183.476303] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (50s / no limit) vm-test-run-hermes-remote> server # [ 183.972996] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (51s / no limit) vm-test-run-hermes-remote> server # [ 184.507584] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (51s / no limit) vm-test-run-hermes-remote> server # [ 184.987846] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (52s / no limit) vm-test-run-hermes-remote> server # [ 185.471547] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (52s / no limit) vm-test-run-hermes-remote> server # [ 185.522536] systemd[1]: hermes-dashboard-fwd-alice@20-4101-127.0.0.1:22901-127.0.0.1:40932.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 185.523175] systemd[1]: hermes-dashboard-fwd-alice@20-4101-127.0.0.1:22901-127.0.0.1:40932.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 185.989836] microvm@hermes-alice[1125]: [* ] A start job is running for NixOS Activation (53s / no limit) vm-test-run-hermes-remote> server # [ 186.477354] microvm@hermes-alice[1125]: [** ] A start job is running for NixOS Activation (53s / no limit) vm-test-run-hermes-remote> server # [ 186.919407] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:52064). vm-test-run-hermes-remote> server # [ 186.983504] microvm@hermes-alice[1125]: [*** ] A start job is running for NixOS Activation (54s / no limit) vm-test-run-hermes-remote> server # [ 187.496708] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (54s / no limit) vm-test-run-hermes-remote> server # [ 187.977474] microvm@hermes-alice[1125]: [ *** ] A start job is running for NixOS Activation (55s / no limit) vm-test-run-hermes-remote> server # [ 188.476640] microvm@hermes-alice[1125]: [ ***] A start job is running for NixOS Activation (55s / no limit) vm-test-run-hermes-remote> server # [ 188.987318] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (56s / no limit) vm-test-run-hermes-remote> server # [ 189.239184] systemd[1]: hermes-dashboard-fwd-alice@21-4102-127.0.0.1:22901-127.0.0.1:52064.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 189.247563] systemd[1]: hermes-dashboard-fwd-alice@21-4102-127.0.0.1:22901-127.0.0.1:52064.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 189.471146] microvm@hermes-alice[1125]: [ *] A start job is running for NixOS Activation (56s / no limit) vm-test-run-hermes-remote> server # [ 189.981260] microvm@hermes-alice[1125]: [ **] A start job is running for NixOS Activation (57s / no limit) vm-test-run-hermes-remote> server # [ 190.205584] microvm@hermes-alice[1125]: [ OK ] Finished NixOS Activation. vm-test-run-hermes-remote> server # [ 190.244980] microvm@hermes-alice[1125]: Starting Switch Root... vm-test-run-hermes-remote> server # [ 190.593671] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:52074). vm-test-run-hermes-remote> server # [ 193.235316] systemd[1]: hermes-dashboard-fwd-alice@22-9-127.0.0.1:22901-127.0.0.1:52074.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 193.238211] systemd[1]: hermes-dashboard-fwd-alice@22-9-127.0.0.1:22901-127.0.0.1:52074.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 194.473486] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35236). vm-test-run-hermes-remote> server # [ 194.874992] systemd[1]: hermes-dashboard-fwd-alice@23-10-127.0.0.1:22901-127.0.0.1:35236.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 194.877967] systemd[1]: hermes-dashboard-fwd-alice@23-10-127.0.0.1:22901-127.0.0.1:35236.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 196.253175] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35248). vm-test-run-hermes-remote> server # [ 196.775556] systemd[1]: hermes-dashboard-fwd-alice@24-8198-127.0.0.1:22901-127.0.0.1:35248.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 196.776875] systemd[1]: hermes-dashboard-fwd-alice@24-8198-127.0.0.1:22901-127.0.0.1:35248.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 197.490438] microvm@hermes-alice[1125]: +q6E616D65 vm-test-run-hermes-remote> server # [ 197.497031] microvm@hermes-alice[1125]: Welcome to NixOS 26.11 (Zokor)! vm-test-run-hermes-remote> server # [ 197.504336] microvm@hermes-alice[1125]: vm-test-run-hermes-remote> server # [ 197.922682] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35254). vm-test-run-hermes-remote> server # [ 198.264604] systemd[1]: hermes-dashboard-fwd-alice@25-12292-127.0.0.1:22901-127.0.0.1:35254.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 198.268468] systemd[1]: hermes-dashboard-fwd-alice@25-12292-127.0.0.1:22901-127.0.0.1:35254.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 199.399785] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35264). vm-test-run-hermes-remote> server # [ 199.848923] systemd[1]: hermes-dashboard-fwd-alice@26-4103-127.0.0.1:22901-127.0.0.1:35264.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 199.850066] systemd[1]: hermes-dashboard-fwd-alice@26-4103-127.0.0.1:22901-127.0.0.1:35264.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 201.109863] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35278). vm-test-run-hermes-remote> server # [ 201.641670] systemd[1]: hermes-dashboard-fwd-alice@27-8199-127.0.0.1:22901-127.0.0.1:35278.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 201.642339] systemd[1]: hermes-dashboard-fwd-alice@27-8199-127.0.0.1:22901-127.0.0.1:35278.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 202.961799] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35290). vm-test-run-hermes-remote> server # [ 203.224456] systemd[1]: hermes-dashboard-fwd-alice@28-8200-127.0.0.1:22901-127.0.0.1:35290.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 203.227238] systemd[1]: hermes-dashboard-fwd-alice@28-8200-127.0.0.1:22901-127.0.0.1:35290.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 204.762935] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46216). vm-test-run-hermes-remote> server # [ 205.387341] systemd[1]: hermes-dashboard-fwd-alice@29-12293-127.0.0.1:22901-127.0.0.1:46216.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 205.387965] systemd[1]: hermes-dashboard-fwd-alice@29-12293-127.0.0.1:22901-127.0.0.1:46216.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 206.511776] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46218). vm-test-run-hermes-remote> server # [ 206.825118] systemd[1]: hermes-dashboard-fwd-alice@30-8201-127.0.0.1:22901-127.0.0.1:46218.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 206.825683] systemd[1]: hermes-dashboard-fwd-alice@30-8201-127.0.0.1:22901-127.0.0.1:46218.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 208.038826] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46224). vm-test-run-hermes-remote> server # [ 208.284140] systemd[1]: hermes-dashboard-fwd-alice@31-8202-127.0.0.1:22901-127.0.0.1:46224.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 208.284710] systemd[1]: hermes-dashboard-fwd-alice@31-8202-127.0.0.1:22901-127.0.0.1:46224.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 209.745863] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46232). vm-test-run-hermes-remote> server # [ 210.597488] systemd[1]: hermes-dashboard-fwd-alice@32-11-127.0.0.1:22901-127.0.0.1:46232.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 210.598488] systemd[1]: hermes-dashboard-fwd-alice@32-11-127.0.0.1:22901-127.0.0.1:46232.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 211.817518] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46248). vm-test-run-hermes-remote> server # [ 212.182155] systemd[1]: hermes-dashboard-fwd-alice@33-4104-127.0.0.1:22901-127.0.0.1:46248.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 212.196387] systemd[1]: hermes-dashboard-fwd-alice@33-4104-127.0.0.1:22901-127.0.0.1:46248.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 213.422338] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47494). vm-test-run-hermes-remote> server # [ 213.927415] systemd[1]: hermes-dashboard-fwd-alice@34-12294-127.0.0.1:22901-127.0.0.1:47494.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 213.928041] systemd[1]: hermes-dashboard-fwd-alice@34-12294-127.0.0.1:22901-127.0.0.1:47494.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 215.374347] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47496). vm-test-run-hermes-remote> server # [ 215.841867] systemd[1]: hermes-dashboard-fwd-alice@35-12295-127.0.0.1:22901-127.0.0.1:47496.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 215.842494] systemd[1]: hermes-dashboard-fwd-alice@35-12295-127.0.0.1:22901-127.0.0.1:47496.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 217.345176] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47500). vm-test-run-hermes-remote> server # [ 217.579401] systemd[1]: hermes-dashboard-fwd-alice@36-8203-127.0.0.1:22901-127.0.0.1:47500.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 217.579992] systemd[1]: hermes-dashboard-fwd-alice@36-8203-127.0.0.1:22901-127.0.0.1:47500.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 218.917006] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47502). vm-test-run-hermes-remote> server # [ 219.564631] systemd[1]: hermes-dashboard-fwd-alice@37-12296-127.0.0.1:22901-127.0.0.1:47502.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 219.565827] systemd[1]: hermes-dashboard-fwd-alice@37-12296-127.0.0.1:22901-127.0.0.1:47502.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 220.700938] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47514). vm-test-run-hermes-remote> server # [ 221.123248] systemd[1]: hermes-dashboard-fwd-alice@38-4105-127.0.0.1:22901-127.0.0.1:47514.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 221.123849] systemd[1]: hermes-dashboard-fwd-alice@38-4105-127.0.0.1:22901-127.0.0.1:47514.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 221.878253] microvm@hermes-alice[1125]: [ OK ] Stopped initrd-switch-root.service. vm-test-run-hermes-remote> server # [ 221.902297] microvm@hermes-alice[1125]: [ OK ] Created slice Slice /system/getty. vm-test-run-hermes-remote> server # [ 221.919894] microvm@hermes-alice[1125]: [ OK ] Created slice Slice /system/serial-getty. vm-test-run-hermes-remote> server # [ 221.938076] microvm@hermes-alice[1125]: [ OK ] Created slice User and Session Slice. vm-test-run-hermes-remote> server # [ 221.963863] microvm@hermes-alice[1125]: [ OK ] Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 221.973873] microvm@hermes-alice[1125]: [ OK ] Started Forward Password Requests to Wall Directory Watch. vm-test-run-hermes-remote> server # [ 221.993057] microvm@hermes-alice[1125]: Expecting device /dev/ttyS0... vm-test-run-hermes-remote> server # [ 222.006932] microvm@hermes-alice[1125]: [ OK ] Reached target Local Encrypted Volumes. vm-test-run-hermes-remote> server # [ 222.012865] microvm@hermes-alice[1125]: [ OK ] Stopped target initrd-fs.target. vm-test-run-hermes-remote> server # [ 222.023039] microvm@hermes-alice[1125]: [ OK ] Stopped target initrd-root-fs.target. vm-test-run-hermes-remote> server # [ 222.037906] microvm@hermes-alice[1125]: [ OK ] Stopped target initrd-switch-root.target. vm-test-run-hermes-remote> server # [ 222.064871] microvm@hermes-alice[1125]: [ OK ] Reached target Virtual Machines and Containers. vm-test-run-hermes-remote> server # [ 222.080927] microvm@hermes-alice[1125]: [ OK ] Reached target Path Units. vm-test-run-hermes-remote> server # [ 222.085848] microvm@hermes-alice[1125]: [ OK ] Reached target Remote File Systems. vm-test-run-hermes-remote> server # [ 222.089884] microvm@hermes-alice[1125]: [ OK ] Reached target Slice Units. vm-test-run-hermes-remote> server # [ 222.097856] microvm@hermes-alice[1125]: [ OK ] Reached target Swaps. vm-test-run-hermes-remote> server # [ 222.226851] microvm@hermes-alice[1125]: [ OK ] Listening on Query the User Interactively for a Password. vm-test-run-hermes-remote> server # [ 222.363905] microvm@hermes-alice[1125]: [ OK ] Listening on Process Core Dump Socket. vm-test-run-hermes-remote> server # [ 222.450905] microvm@hermes-alice[1125]: [ OK ] Listening on Credential Encryption/Decryption. vm-test-run-hermes-remote> server # [ 222.520864] microvm@hermes-alice[1125]: [ OK ] Listening on Factory Reset Management. vm-test-run-hermes-remote> server # [ 222.533541] microvm@hermes-alice[1125]: [ OK ] Listening on Hostname Service Socket. vm-test-run-hermes-remote> server # [ 222.592624] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47516). vm-test-run-hermes-remote> server # [ 222.617432] microvm@hermes-alice[1125]: Starting Journal Log Access Socket... vm-test-run-hermes-remote> server # [ 222.654565] microvm@hermes-alice[1125]: [ OK ] Listening on Journal Audit Socket. vm-test-run-hermes-remote> server # [ 222.743523] microvm@hermes-alice[1125]: [ OK ] Listening on Console Output Muting Service Socket. vm-test-run-hermes-remote> server # [ 222.771992] microvm@hermes-alice[1125]: [ OK ] Listening on Network Management Resolve Hook Socket. vm-test-run-hermes-remote> server # [ 222.786846] microvm@hermes-alice[1125]: [ OK ] Listening on Network Management Metrics Varlink Socket. vm-test-run-hermes-remote> server # [ 222.803831] microvm@hermes-alice[1125]: [ OK ] Listening on Network Management Varlink Socket. vm-test-run-hermes-remote> server # [ 222.826001] microvm@hermes-alice[1125]: [ OK ] Listening on Network Management Netlink Socket. vm-test-run-hermes-remote> server # [ 222.834523] microvm@hermes-alice[1125]: [ OK ] Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-hermes-remote> server # [ 222.971357] systemd[1]: hermes-dashboard-fwd-alice@39-8204-127.0.0.1:22901-127.0.0.1:47516.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 222.971947] systemd[1]: hermes-dashboard-fwd-alice@39-8204-127.0.0.1:22901-127.0.0.1:47516.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 223.050889] microvm@hermes-alice[1125]: [ OK ] Listening on Disk Repartitioning Service Socket. vm-test-run-hermes-remote> server # [ 223.053912] microvm@hermes-alice[1125]: [ OK ] Listening on Resolve Monitor Varlink Socket. vm-test-run-hermes-remote> server # [ 223.076855] microvm@hermes-alice[1125]: [ OK ] Listening on Resolve Service Varlink Socket. vm-test-run-hermes-remote> server # [ 223.083821] microvm@hermes-alice[1125]: [ OK ] Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 223.087834] microvm@hermes-alice[1125]: [ OK ] Listening on udev Varlink Socket. vm-test-run-hermes-remote> server # [ 223.141106] microvm@hermes-alice[1125]: Mounting Huge Pages File System... vm-test-run-hermes-remote> server # [ 223.170223] microvm@hermes-alice[1125]: Mounting POSIX Message Queue File System... vm-test-run-hermes-remote> server # [ 223.424699] microvm@hermes-alice[1125]: Mounting Kernel Debug File System... vm-test-run-hermes-remote> server # [ 223.503122] microvm@hermes-alice[1125]: Mounting Kernel Trace File System... vm-test-run-hermes-remote> server # [ 223.833985] microvm@hermes-alice[1125]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 224.159478] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54020). vm-test-run-hermes-remote> server # [ 224.274394] microvm@hermes-alice[1125]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 224.537165] microvm@hermes-alice[1125]: Mounting FUSE Control File System... vm-test-run-hermes-remote> server # [ 224.595038] systemd[1]: hermes-dashboard-fwd-alice@40-8205-127.0.0.1:22901-127.0.0.1:54020.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 224.595617] systemd[1]: hermes-dashboard-fwd-alice@40-8205-127.0.0.1:22901-127.0.0.1:54020.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 225.168636] microvm@hermes-alice[1125]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 225.271171] microvm@hermes-alice[1125]: Starting Load Kernel Modules... vm-test-run-hermes-remote> server # [ 225.538535] microvm@hermes-alice[1125]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-hermes-remote> server # [ 225.767902] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54024). vm-test-run-hermes-remote> server # [ 226.359953] microvm@hermes-alice[1125]: Starting Remount Root and Kernel File Systems... vm-test-run-hermes-remote> server # [ 226.733104] systemd[1]: hermes-dashboard-fwd-alice@41-12-127.0.0.1:22901-127.0.0.1:54024.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 226.733721] systemd[1]: hermes-dashboard-fwd-alice@41-12-127.0.0.1:22901-127.0.0.1:54024.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 226.830332] microvm@hermes-alice[1125]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 227.436734] microvm@hermes-alice[1125]: [ OK ] Listening on Journal Log Access Socket. vm-test-run-hermes-remote> server # [ 227.482919] microvm@hermes-alice[1125]: [ OK ] Mounted Huge Pages File System. vm-test-run-hermes-remote> server # [ 227.704103] microvm@hermes-alice[1125]: [ OK ] Mounted POSIX Message Queue File System. vm-test-run-hermes-remote> server # [ 227.793888] microvm@hermes-alice[1125]: [ OK ] Mounted Kernel Debug File System. vm-test-run-hermes-remote> server # [ 227.842225] microvm@hermes-alice[1125]: [ OK ] Mounted Kernel Trace File System. vm-test-run-hermes-remote> server # [ 227.890968] microvm@hermes-alice[1125]: [ OK ] Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 228.099952] microvm@hermes-alice[1125]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 228.258054] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54040). vm-test-run-hermes-remote> server # [ 229.202627] hrtimer: interrupt took 6324826 ns vm-test-run-hermes-remote> server # [ 228.857193] microvm@hermes-alice[1125]: [ OK ] Mounted FUSE Control File System. vm-test-run-hermes-remote> server # [ 229.017916] systemd[1]: hermes-dashboard-fwd-alice@42-12297-127.0.0.1:22901-127.0.0.1:54040.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 229.022736] systemd[1]: hermes-dashboard-fwd-alice@42-12297-127.0.0.1:22901-127.0.0.1:54040.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 230.135558] microvm@hermes-alice[1125]: [ OK ] Started Journal Service. vm-test-run-hermes-remote> server # [ 230.228878] microvm@hermes-alice[1125]: [ OK ] Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 230.235983] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54054). vm-test-run-hermes-remote> server # [ 230.383913] microvm@hermes-alice[1125]: Mounting Kernel Configuration File System... vm-test-run-hermes-remote> server # [ 230.631040] systemd[1]: hermes-dashboard-fwd-alice@43-12298-127.0.0.1:22901-127.0.0.1:54054.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 230.632521] systemd[1]: hermes-dashboard-fwd-alice@43-12298-127.0.0.1:22901-127.0.0.1:54054.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 230.990310] microvm@hermes-alice[1125]: [ OK ] Finished Remount Root and Kernel File Systems. vm-test-run-hermes-remote> server # [ 231.018042] microvm@hermes-alice[1125]: [ OK ] Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-hermes-remote> server # [ 231.038974] microvm@hermes-alice[1125]: [ OK ] Listening on Disk Image Download Service Socket. vm-test-run-hermes-remote> server # [ 231.136391] microvm@hermes-alice[1125]: Starting Flush Journal to Persistent Storage... vm-test-run-hermes-remote> server # [ 231.180412] microvm@hermes-alice[1125]: Starting Load/Save OS Random Seed... vm-test-run-hermes-remote> server # [ 231.639153] microvm@hermes-alice[1125]: Starting Network Time Synchronization... vm-test-run-hermes-remote> server # [ 231.675135] microvm@hermes-alice[1125]: [ OK ] Finished Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 231.777268] microvm@hermes-alice[1125]: [ OK ] Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 231.820340] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54056). vm-test-run-hermes-remote> server # [ 231.889621] microvm@hermes-alice[1125]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 232.282627] systemd[1]: hermes-dashboard-fwd-alice@44-4106-127.0.0.1:22901-127.0.0.1:54056.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 232.283231] systemd[1]: hermes-dashboard-fwd-alice@44-4106-127.0.0.1:22901-127.0.0.1:54056.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 233.305498] microvm@hermes-alice[1125]: [ OK ] Finished Load/Save OS Random Seed. vm-test-run-hermes-remote> server # [ 233.347631] microvm@hermes-alice[1125]: [ OK ] Mounted Kernel Configuration File System. vm-test-run-hermes-remote> server # [ 233.467551] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54008). vm-test-run-hermes-remote> server # [ 233.508287] microvm@hermes-alice[1125]: [ OK ] Finished Flush Journal to Persistent Storage. vm-test-run-hermes-remote> server # [ 233.992507] systemd[1]: hermes-dashboard-fwd-alice@45-13-127.0.0.1:22901-127.0.0.1:54008.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 233.993136] systemd[1]: hermes-dashboard-fwd-alice@45-13-127.0.0.1:22901-127.0.0.1:54008.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 234.887996] microvm@hermes-alice[1125]: [ OK ] Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 234.996570] microvm@hermes-alice[1125]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 235.257762] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54022). vm-test-run-hermes-remote> server # [ 235.316165] microvm@hermes-alice[1125]: [ OK ] Started Network Time Synchronization. vm-test-run-hermes-remote> server # [ 235.371253] microvm@hermes-alice[1125]: [ OK ] Reached target System Time Set. vm-test-run-hermes-remote> server # [ 236.038139] systemd[1]: hermes-dashboard-fwd-alice@46-14-127.0.0.1:22901-127.0.0.1:54022.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 236.038802] systemd[1]: hermes-dashboard-fwd-alice@46-14-127.0.0.1:22901-127.0.0.1:54022.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 236.400516] microvm@hermes-alice[1125]: [ OK ] Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 236.529805] microvm@hermes-alice[1125]: Starting Network Name Resolution... vm-test-run-hermes-remote> server # [ 237.151595] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54038). vm-test-run-hermes-remote> server # [ 237.389242] systemd[1]: hermes-dashboard-fwd-alice@47-4107-127.0.0.1:22901-127.0.0.1:54038.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 237.389821] systemd[1]: hermes-dashboard-fwd-alice@47-4107-127.0.0.1:22901-127.0.0.1:54038.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 237.527186] microvm@hermes-alice[1125]: [ OK ] Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 237.551664] microvm@hermes-alice[1125]: [ OK ] Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 237.597036] microvm@hermes-alice[1125]: Mounting /home/alice/hermes... vm-test-run-hermes-remote> server # [ 237.810458] microvm@hermes-alice[1125]: Mounting /run/wrappers... vm-test-run-hermes-remote> server # [ 237.950993] microvm@hermes-alice[1125]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 238.600585] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54052). vm-test-run-hermes-remote> server # [ 239.191330] systemd[1]: hermes-dashboard-fwd-alice@48-8206-127.0.0.1:22901-127.0.0.1:54052.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 239.201885] systemd[1]: hermes-dashboard-fwd-alice@48-8206-127.0.0.1:22901-127.0.0.1:54052.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 239.764942] microvm@hermes-alice[1125]: [ OK ] Mounted /home/alice/hermes. vm-test-run-hermes-remote> server # [ 239.773918] microvm@hermes-alice[1125]: [ OK ] Mounted /run/wrappers. vm-test-run-hermes-remote> server # [ 239.790437] microvm@hermes-alice[1125]: [ OK ] Reached target Local File Systems. vm-test-run-hermes-remote> server # [ 239.913748] microvm@hermes-alice[1125]: [ OK ] Listening on Boot Loader Control Service Socket. vm-test-run-hermes-remote> server # [ 239.964416] microvm@hermes-alice[1125]: Starting Create SUID/SGID Wrappers... vm-test-run-hermes-remote> server # [ 240.259371] microvm@hermes-alice[1125]: Starting Create System Files and Directories... vm-test-run-hermes-remote> server # [ 240.572753] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54056). vm-test-run-hermes-remote> server # [ 240.662702] microvm@hermes-alice[1125]: [ OK ] Started Network Name Resolution. vm-test-run-hermes-remote> server # [ 241.080544] systemd[1]: hermes-dashboard-fwd-alice@49-15-127.0.0.1:22901-127.0.0.1:54056.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 241.081331] systemd[1]: hermes-dashboard-fwd-alice@49-15-127.0.0.1:22901-127.0.0.1:54056.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 242.457944] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54064). vm-test-run-hermes-remote> server # [ 242.734370] microvm@hermes-alice[1125]: [* ] (1 of 4) A start job is running for… Events and Files (21s / 1min 46s) vm-test-run-hermes-remote> server # [ 242.892749] systemd[1]: hermes-dashboard-fwd-alice@50-12299-127.0.0.1:22901-127.0.0.1:54064.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 242.893374] systemd[1]: hermes-dashboard-fwd-alice@50-12299-127.0.0.1:22901-127.0.0.1:54064.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 243.259173] microvm@hermes-alice[1125]: [** ] (1 of 4) A start job is running for… Events and Files (21s / 1min 46s) vm-test-run-hermes-remote> server # [ 243.752572] microvm@hermes-alice[1125]: [*** ] (1 of 4) A start job is running for… Events and Files (22s / 1min 46s) vm-test-run-hermes-remote> server # [ 243.879194] microvm@hermes-alice[1125]: [ OK ] Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 244.050915] microvm@hermes-alice[1125]: Starting Rebuild Journal Catalog... vm-test-run-hermes-remote> server # [ 244.122319] microvm@hermes-alice[1125]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-hermes-remote> server # [ 244.328485] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38822). vm-test-run-hermes-remote> server # [ 244.724765] microvm@hermes-alice[1125]: [ OK ] Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 244.845760] microvm@hermes-alice[1125]: Starting Network Management... vm-test-run-hermes-remote> server # [ 245.045435] systemd[1]: hermes-dashboard-fwd-alice@51-8207-127.0.0.1:22901-127.0.0.1:38822.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 245.050976] systemd[1]: hermes-dashboard-fwd-alice@51-8207-127.0.0.1:22901-127.0.0.1:38822.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 246.455848] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38830). vm-test-run-hermes-remote> server # [ 246.584614] microvm@hermes-alice[1125]: [ OK ] Finished Record System Boot/Shutdown in UTMP. vm-test-run-hermes-remote> server # [ 246.803994] systemd[1]: hermes-dashboard-fwd-alice@52-4108-127.0.0.1:22901-127.0.0.1:38830.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 246.804607] systemd[1]: hermes-dashboard-fwd-alice@52-4108-127.0.0.1:22901-127.0.0.1:38830.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 247.506899] microvm@hermes-alice[1125]: [ OK ] Finished Rebuild Journal Catalog. vm-test-run-hermes-remote> server # [ 247.649199] microvm@hermes-alice[1125]: Starting Update is Completed... vm-test-run-hermes-remote> server # [ 248.430144] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38834). vm-test-run-hermes-remote> server # [ 249.124068] systemd[1]: hermes-dashboard-fwd-alice@53-8208-127.0.0.1:22901-127.0.0.1:38834.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 249.127310] systemd[1]: hermes-dashboard-fwd-alice@53-8208-127.0.0.1:22901-127.0.0.1:38834.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 250.064468] microvm@hermes-alice[1125]: [ *** ] (2 of 4) A start job is running for…date is Completed (28s / no limit) vm-test-run-hermes-remote> server # [ 250.172833] microvm@hermes-alice[1125]: [ OK ] Finished Update is Completed. vm-test-run-hermes-remote> server # [ 250.316525] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38836). vm-test-run-hermes-remote> server # [ 251.144128] systemd[1]: hermes-dashboard-fwd-alice@54-4109-127.0.0.1:22901-127.0.0.1:38836.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 251.144738] systemd[1]: hermes-dashboard-fwd-alice@54-4109-127.0.0.1:22901-127.0.0.1:38836.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 252.182162] microvm@hermes-alice[1125]: [ *** ] (2 of 3) A start job is running for /dev/ttyS0 (30s / 1min 30s) vm-test-run-hermes-remote> server # [ 252.418280] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38850). vm-test-run-hermes-remote> server # [ 252.742846] microvm@hermes-alice[1125]: [ ***] (2 of 3) A start job is running for /dev/ttyS0 (31s / 1min 30s) vm-test-run-hermes-remote> server # [ 252.879640] systemd[1]: hermes-dashboard-fwd-alice@55-16-127.0.0.1:22901-127.0.0.1:38850.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 252.880614] systemd[1]: hermes-dashboard-fwd-alice@55-16-127.0.0.1:22901-127.0.0.1:38850.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 253.253718] microvm@hermes-alice[1125]: [ **] (3 of 3) A start job is running for…UID/SGID Wrappers (31s / no limit) vm-test-run-hermes-remote> server # [ 253.784065] microvm@hermes-alice[1125]: [ *] (3 of 3) A start job is running for…UID/SGID Wrappers (32s / no limit) vm-test-run-hermes-remote> server # [ 254.214639] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56224). vm-test-run-hermes-remote> server # [ 254.285328] microvm@hermes-alice[1125]: [ **] (3 of 3) A start job is running for…UID/SGID Wrappers (32s / no limit) vm-test-run-hermes-remote> server # [ 254.730700] microvm@hermes-alice[1125]: [ ***] (1 of 3) A start job is running for…etwork Management (33s / 1min 53s) vm-test-run-hermes-remote> server # [ 254.841246] systemd[1]: hermes-dashboard-fwd-alice@56-8209-127.0.0.1:22901-127.0.0.1:56224.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 254.841951] systemd[1]: hermes-dashboard-fwd-alice@56-8209-127.0.0.1:22901-127.0.0.1:56224.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 255.225257] microvm@hermes-alice[1125]: [ *** ] (1 of 3) A start job is running for…etwork Management (33s / 1min 53s) vm-test-run-hermes-remote> server # [ 255.544555] microvm@hermes-alice[1125]: [ *** ] (1 of 3) A start job is running for…etwork Management (34s / 1min 53s) vm-test-run-hermes-remote> server # [ 255.977062] microvm@hermes-alice[1125]: [*** ] (2 of 3) A start job is running for /dev/ttyS0 (34s / 1min 30s) vm-test-run-hermes-remote> server # [ 256.105856] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56232). vm-test-run-hermes-remote> server # [ 256.402324] systemd[1]: hermes-dashboard-fwd-alice@57-12300-127.0.0.1:22901-127.0.0.1:56232.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 256.405091] systemd[1]: hermes-dashboard-fwd-alice@57-12300-127.0.0.1:22901-127.0.0.1:56232.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 256.485876] microvm@hermes-alice[1125]: [** ] (2 of 3) A start job is running for /dev/ttyS0 (34s / 1min 30s) vm-test-run-hermes-remote> server # [ 256.986303] microvm@hermes-alice[1125]: [* ] (2 of 3) A start job is running for /dev/ttyS0 (35s / 1min 30s) vm-test-run-hermes-remote> server # [ 257.515910] microvm@hermes-alice[1125]: [** ] (3 of 3) A start job is running for…UID/SGID Wrappers (35s / no limit) vm-test-run-hermes-remote> server # [ 258.358468] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56238). vm-test-run-hermes-remote> server # [ 259.143262] systemd[1]: hermes-dashboard-fwd-alice@58-8210-127.0.0.1:22901-127.0.0.1:56238.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 259.143927] systemd[1]: hermes-dashboard-fwd-alice@58-8210-127.0.0.1:22901-127.0.0.1:56238.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 259.996119] microvm@hermes-alice[1125]: [*** ] (2 of 2) A start job is running for…UID/SGID Wrappers (38s / no limit) vm-test-run-hermes-remote> server # [ 260.398570] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56248). vm-test-run-hermes-remote> server # [ 260.491477] microvm@hermes-alice[1125]: [ *** ] (2 of 2) A start job is running for…UID/SGID Wrappers (38s / no limit) vm-test-run-hermes-remote> server # [ 261.012484] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…etwork Management (39s / 1min 53s) vm-test-run-hermes-remote> server # [ 261.419559] microvm@hermes-alice[1125]: [ ***] (1 of 2) A start job is running for…etwork Management (39s / 1min 53s) vm-test-run-hermes-remote> server # [ 261.426125] systemd[1]: hermes-dashboard-fwd-alice@59-12301-127.0.0.1:22901-127.0.0.1:56248.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 261.430843] systemd[1]: hermes-dashboard-fwd-alice@59-12301-127.0.0.1:22901-127.0.0.1:56248.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 261.955927] microvm@hermes-alice[1125]: [ **] (1 of 2) A start job is running for…etwork Management (40s / 1min 53s) vm-test-run-hermes-remote> server # [ 262.477557] microvm@hermes-alice[1125]: [ *] (2 of 2) A start job is running for…UID/SGID Wrappers (40s / no limit) vm-test-run-hermes-remote> server # [ 262.824933] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56250). vm-test-run-hermes-remote> server # [ 262.998118] microvm@hermes-alice[1125]: [ **] (2 of 2) A start job is running for…UID/SGID Wrappers (41s / no limit) vm-test-run-hermes-remote> server # [ 263.488408] microvm@hermes-alice[1125]: [ ***] (2 of 2) A start job is running for…UID/SGID Wrappers (41s / no limit) vm-test-run-hermes-remote> server # [ 263.626456] systemd[1]: hermes-dashboard-fwd-alice@60-17-127.0.0.1:22901-127.0.0.1:56250.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 263.627588] systemd[1]: hermes-dashboard-fwd-alice@60-17-127.0.0.1:22901-127.0.0.1:56250.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 263.995644] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…etwork Management (42s / 1min 53s) vm-test-run-hermes-remote> server # [ 264.530989] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…etwork Management (43s / 1min 53s) vm-test-run-hermes-remote> server # [ 264.867223] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34946). vm-test-run-hermes-remote> server # [ 264.882951] microvm@hermes-alice[1125]: [*** ] (1 of 2) A start job is running for…etwork Management (43s / 1min 53s) vm-test-run-hermes-remote> server # [ 265.258818] microvm@hermes-alice[1125]: [** ] (2 of 2) A start job is running for…UID/SGID Wrappers (43s / no limit) vm-test-run-hermes-remote> server # [ 265.273426] systemd[1]: hermes-dashboard-fwd-alice@61-4110-127.0.0.1:22901-127.0.0.1:34946.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 265.273979] systemd[1]: hermes-dashboard-fwd-alice@61-4110-127.0.0.1:22901-127.0.0.1:34946.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 265.749987] microvm@hermes-alice[1125]: [* ] (2 of 2) A start job is running for…UID/SGID Wrappers (44s / no limit) vm-test-run-hermes-remote> server # [ 266.150408] microvm@hermes-alice[1125]: [** ] (2 of 2) A start job is running for…UID/SGID Wrappers (44s / no limit) vm-test-run-hermes-remote> server # [ 266.499220] microvm@hermes-alice[1125]: [*** ] (1 of 2) A start job is running for…etwork Management (44s / 1min 53s) vm-test-run-hermes-remote> server # [ 266.834482] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34950). vm-test-run-hermes-remote> server # [ 267.800932] systemd[1]: hermes-dashboard-fwd-alice@62-12302-127.0.0.1:22901-127.0.0.1:34950.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 267.801563] systemd[1]: hermes-dashboard-fwd-alice@62-12302-127.0.0.1:22901-127.0.0.1:34950.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 267.916093] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…etwork Management (46s / 1min 53s) vm-test-run-hermes-remote> server # [ 268.056191] microvm@hermes-alice[1125]: [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-hermes-remote> server # [ 268.288898] microvm@hermes-alice[1125]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 269.095517] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34952). vm-test-run-hermes-remote> server # [ 269.555426] systemd[1]: hermes-dashboard-fwd-alice@63-8211-127.0.0.1:22901-127.0.0.1:34952.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 269.556122] systemd[1]: hermes-dashboard-fwd-alice@63-8211-127.0.0.1:22901-127.0.0.1:34952.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 270.229627] microvm@hermes-alice[1125]: [ *** ] (2 of 3) A start job is running for…UID/SGID Wrappers (48s / no limit) vm-test-run-hermes-remote> server # [ 270.776540] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34956). vm-test-run-hermes-remote> server # [ 270.835659] microvm@hermes-alice[1125]: [ ***] (3 of 3) A start job is running for…tual Console Setup (2s / no limit) vm-test-run-hermes-remote> server # [ 271.249143] microvm@hermes-alice[1125]: [ **] (3 of 3) A start job is running for…tual Console Setup (3s / no limit) vm-test-run-hermes-remote> server # [ 271.446174] systemd[1]: hermes-dashboard-fwd-alice@64-18-127.0.0.1:22901-127.0.0.1:34956.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 271.456653] systemd[1]: hermes-dashboard-fwd-alice@64-18-127.0.0.1:22901-127.0.0.1:34956.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 271.631553] microvm@hermes-alice[1125]: [ *] (3 of 3) A start job is running for…tual Console Setup (3s / no limit) vm-test-run-hermes-remote> server # [ 271.977929] microvm@hermes-alice[1125]: [ **] (1 of 3) A start job is running for…etwork Management (50s / 1min 53s) vm-test-run-hermes-remote> server # [ 272.383991] microvm@hermes-alice[1125]: [ ***] (1 of 3) A start job is running for…etwork Management (50s / 1min 53s) vm-test-run-hermes-remote> server # [ 272.677873] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34966). vm-test-run-hermes-remote> server # [ 272.736264] microvm@hermes-alice[1125]: [ *** ] (1 of 3) A start job is running for…etwork Management (51s / 1min 53s) vm-test-run-hermes-remote> server # [ 273.242507] microvm@hermes-alice[1125]: [ *** ] (2 of 3) A start job is running for…UID/SGID Wrappers (51s / no limit) vm-test-run-hermes-remote> server # [ 273.303972] systemd[1]: hermes-dashboard-fwd-alice@65-12303-127.0.0.1:22901-127.0.0.1:34966.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 273.304614] systemd[1]: hermes-dashboard-fwd-alice@65-12303-127.0.0.1:22901-127.0.0.1:34966.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 273.741443] microvm@hermes-alice[1125]: [*** ] (2 of 3) A start job is running for…UID/SGID Wrappers (52s / no limit) vm-test-run-hermes-remote> server # [ 274.239144] microvm@hermes-alice[1125]: [** ] (2 of 3) A start job is running for…UID/SGID Wrappers (52s / no limit) vm-test-run-hermes-remote> server # [ 274.660657] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58290). vm-test-run-hermes-remote> server # [ 274.728805] microvm@hermes-alice[1125]: [* ] (3 of 3) A start job is running for…tual Console Setup (6s / no limit) vm-test-run-hermes-remote> server # [ 275.207318] systemd[1]: hermes-dashboard-fwd-alice@66-19-127.0.0.1:22901-127.0.0.1:58290.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 275.224877] systemd[1]: hermes-dashboard-fwd-alice@66-19-127.0.0.1:22901-127.0.0.1:58290.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 275.248106] microvm@hermes-alice[1125]: [** ] (3 of 3) A start job is running for…tual Console Setup (7s / no limit) vm-test-run-hermes-remote> server # [ 275.702255] microvm@hermes-alice[1125]: [*** ] (3 of 3) A start job is running for…tual Console Setup (7s / no limit) vm-test-run-hermes-remote> server # [ 276.096088] microvm@hermes-alice[1125]: [ *** ] (1 of 3) A start job is running for…etwork Management (54s / 1min 53s) vm-test-run-hermes-remote> server # [ 276.216044] microvm@hermes-alice[1125]: [ OK ] Finished Create SUID/SGID Wrappers. vm-test-run-hermes-remote> server # [ 276.718982] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58304). vm-test-run-hermes-remote> server # [ 277.288898] systemd[1]: hermes-dashboard-fwd-alice@67-4111-127.0.0.1:22901-127.0.0.1:58304.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 277.289547] systemd[1]: hermes-dashboard-fwd-alice@67-4111-127.0.0.1:22901-127.0.0.1:58304.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 278.494469] microvm@hermes-alice[1125]: [ *** ] (2 of 2) A start job is running for…ual Console Setup (10s / no limit) vm-test-run-hermes-remote> server # [ 278.866273] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58310). vm-test-run-hermes-remote> server # [ 278.977741] microvm@hermes-alice[1125]: [ ***] (2 of 2) A start job is running for…ual Console Setup (11s / no limit) vm-test-run-hermes-remote> server # [ 279.524446] microvm@hermes-alice[1125]: [ **] (1 of 2) A start job is running for…etwork Management (57s / 1min 53s) vm-test-run-hermes-remote> server # [ 279.621612] systemd[1]: hermes-dashboard-fwd-alice@68-12304-127.0.0.1:22901-127.0.0.1:58310.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 279.622226] systemd[1]: hermes-dashboard-fwd-alice@68-12304-127.0.0.1:22901-127.0.0.1:58310.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 279.979901] microvm@hermes-alice[1125]: [ *] (1 of 2) A start job is running for…etwork Management (58s / 1min 53s) vm-test-run-hermes-remote> server # [ 280.493054] microvm@hermes-alice[1125]: [ **] (1 of 2) A start job is running for…etwork Management (58s / 1min 53s) vm-test-run-hermes-remote> server # [ 280.960983] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58316). vm-test-run-hermes-remote> server # [ 280.978952] microvm@hermes-alice[1125]: [ ***] (2 of 2) A start job is running for…ual Console Setup (13s / no limit) vm-test-run-hermes-remote> server # [ 281.501232] microvm@hermes-alice[1125]: [ *** ] (2 of 2) A start job is running for…ual Console Setup (13s / no limit) vm-test-run-hermes-remote> server # [ 281.530923] systemd[1]: hermes-dashboard-fwd-alice@69-12305-127.0.0.1:22901-127.0.0.1:58316.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 281.531580] systemd[1]: hermes-dashboard-fwd-alice@69-12305-127.0.0.1:22901-127.0.0.1:58316.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 281.906143] microvm@hermes-alice[1125]: [ *** ] (2 of 2) A start job is running for…ual Console Setup (13s / no limit) vm-test-run-hermes-remote> server # [ 282.473423] microvm@hermes-alice[1125]: [*** ] (1 of 2) A start job is running for…twork Management (1min / 1min 53s) vm-test-run-hermes-remote> server # [ 282.636819] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58322). vm-test-run-hermes-remote> server # [ 282.989076] microvm@hermes-alice[1125]: [** ] (1 of 2) A start job is running for…rk Management (1min 1s / 1min 53s) vm-test-run-hermes-remote> server # [ 283.218346] systemd[1]: hermes-dashboard-fwd-alice@70-20-127.0.0.1:22901-127.0.0.1:58322.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 283.221409] systemd[1]: hermes-dashboard-fwd-alice@70-20-127.0.0.1:22901-127.0.0.1:58322.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 283.517389] microvm@hermes-alice[1125]: [* ] (1 of 2) A start job is running for…rk Management (1min 1s / 1min 53s) vm-test-run-hermes-remote> server # [ 283.980311] microvm@hermes-alice[1125]: [** ] (2 of 2) A start job is running for…ual Console Setup (16s / no limit) vm-test-run-hermes-remote> server # [ 284.511175] microvm@hermes-alice[1125]: [*** ] (2 of 2) A start job is running for…ual Console Setup (16s / no limit) vm-test-run-hermes-remote> server # [ 285.015167] microvm@hermes-alice[1125]: [ *** ] (2 of 2) A start job is running for…ual Console Setup (17s / no limit) vm-test-run-hermes-remote> server # [ 285.051787] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:43292). vm-test-run-hermes-remote> server # [ 285.354759] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…rk Management (1min 3s / 1min 53s) vm-test-run-hermes-remote> server # [ 285.687490] microvm@hermes-alice[1125]: [ ***] (1 of 2) A start job is running for…rk Management (1min 4s / 1min 53s) vm-test-run-hermes-remote> server # [ 285.979408] systemd[1]: hermes-dashboard-fwd-alice@71-12306-127.0.0.1:22901-127.0.0.1:43292.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 286.002296] systemd[1]: hermes-dashboard-fwd-alice@71-12306-127.0.0.1:22901-127.0.0.1:43292.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 286.249492] microvm@hermes-alice[1125]: [ **] (1 of 2) A start job is running for…rk Management (1min 4s / 1min 53s) vm-test-run-hermes-remote> server # [ 286.749048] microvm@hermes-alice[1125]: [ *] (2 of 2) A start job is running for…ual Console Setup (18s / no limit) vm-test-run-hermes-remote> server # [ 287.230785] microvm@hermes-alice[1125]: [ **] (2 of 2) A start job is running for…ual Console Setup (19s / no limit) vm-test-run-hermes-remote> server # [ 287.510436] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:43296). vm-test-run-hermes-remote> server # [ 287.764295] microvm@hermes-alice[1125]: [ ***] (2 of 2) A start job is running for…ual Console Setup (19s / no limit) vm-test-run-hermes-remote> server # [ 288.269156] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…rk Management (1min 6s / 1min 53s) vm-test-run-hermes-remote> server # [ 288.553570] systemd[1]: hermes-dashboard-fwd-alice@72-12307-127.0.0.1:22901-127.0.0.1:43296.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 288.554173] systemd[1]: hermes-dashboard-fwd-alice@72-12307-127.0.0.1:22901-127.0.0.1:43296.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 288.662845] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…rk Management (1min 7s / 1min 53s) vm-test-run-hermes-remote> server # [ 289.271251] microvm@hermes-alice[1125]: [*** ] (1 of 2) A start job is running for…rk Management (1min 7s / 1min 53s) vm-test-run-hermes-remote> server # [ 289.666388] microvm@hermes-alice[1125]: [** ] (2 of 2) A start job is running for…ual Console Setup (21s / no limit) vm-test-run-hermes-remote> server # [ 289.875066] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:43310). vm-test-run-hermes-remote> server # [ 289.978129] microvm@hermes-alice[1125]: [* ] (2 of 2) A start job is running for…ual Console Setup (22s / no limit) vm-test-run-hermes-remote> server # [ 290.294200] systemd[1]: hermes-dashboard-fwd-alice@73-8212-127.0.0.1:22901-127.0.0.1:43310.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 290.294795] systemd[1]: hermes-dashboard-fwd-alice@73-8212-127.0.0.1:22901-127.0.0.1:43310.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 290.489463] microvm@hermes-alice[1125]: [** ] (2 of 2) A start job is running for…ual Console Setup (22s / no limit) vm-test-run-hermes-remote> server # [ 290.987258] microvm@hermes-alice[1125]: [*** ] (1 of 2) A start job is running for…rk Management (1min 9s / 1min 53s) vm-test-run-hermes-remote> server # [ 291.480295] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…rk Management (1min 9s / 1min 53s) vm-test-run-hermes-remote> server # [ 291.571464] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:43326). vm-test-run-hermes-remote> server # [ 291.991864] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…k Management (1min 10s / 1min 53s) vm-test-run-hermes-remote> server # [ 292.183913] systemd[1]: hermes-dashboard-fwd-alice@74-21-127.0.0.1:22901-127.0.0.1:43326.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 292.202485] systemd[1]: hermes-dashboard-fwd-alice@74-21-127.0.0.1:22901-127.0.0.1:43326.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 292.530484] microvm@hermes-alice[1125]: [ ***] (2 of 2) A start job is running for…ual Console Setup (24s / no limit) vm-test-run-hermes-remote> server # [ 293.018847] microvm@hermes-alice[1125]: [ **] (2 of 2) A start job is running for…ual Console Setup (25s / no limit) vm-test-run-hermes-remote> server # [ 293.368613] microvm@hermes-alice[1125]: [ *] (2 of 2) A start job is running for…ual Console Setup (25s / no limit) vm-test-run-hermes-remote> server # [ 293.735178] microvm@hermes-alice[1125]: [ **] (1 of 2) A start job is running for…k Management (1min 12s / 1min 53s) vm-test-run-hermes-remote> server # [ 293.844366] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37048). vm-test-run-hermes-remote> server # [ 294.235260] microvm@hermes-alice[1125]: [ ***] (1 of 2) A start job is running for…k Management (1min 12s / 1min 53s) vm-test-run-hermes-remote> server # [ 294.465042] systemd[1]: hermes-dashboard-fwd-alice@75-12308-127.0.0.1:22901-127.0.0.1:37048.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 294.482466] systemd[1]: hermes-dashboard-fwd-alice@75-12308-127.0.0.1:22901-127.0.0.1:37048.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 294.723542] microvm@hermes-alice[1125]: [ *** ] (1 of 2) A start job is running for…k Management (1min 13s / 1min 53s) vm-test-run-hermes-remote> server # [ 295.222373] microvm@hermes-alice[1125]: [ *** ] (2 of 2) A start job is running for…ual Console Setup (27s / no limit) vm-test-run-hermes-remote> server # [ 295.783958] microvm@hermes-alice[1125]: [*** ] (2 of 2) A start job is running for…ual Console Setup (27s / no limit) vm-test-run-hermes-remote> server # [ 295.939242] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37058). vm-test-run-hermes-remote> server # [ 296.228085] microvm@hermes-alice[1125]: [** ] (2 of 2) A start job is running for…ual Console Setup (28s / no limit) vm-test-run-hermes-remote> server # [ 296.448054] systemd[1]: hermes-dashboard-fwd-alice@76-12309-127.0.0.1:22901-127.0.0.1:37058.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 296.449216] systemd[1]: hermes-dashboard-fwd-alice@76-12309-127.0.0.1:22901-127.0.0.1:37058.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 296.728059] microvm@hermes-alice[1125]: [* ] (1 of 2) A start job is running for…k Management (1min 15s / 1min 53s) vm-test-run-hermes-remote> server # [ 297.228996] microvm@hermes-alice[1125]: [** ] (1 of 2) A start job is running for…k Management (1min 15s / 1min 53s) vm-test-run-hermes-remote> server # [ 297.607995] microvm@hermes-alice[1125]: [*** ] (1 of 2) A start job is running for…k Management (1min 16s / 1min 53s) vm-test-run-hermes-remote> server # [ 297.642758] microvm@hermes-alice[1125]: [ OK ] Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 297.684067] microvm@hermes-alice[1125]: [ OK ] Reached target System Initialization. vm-test-run-hermes-remote> server # [ 297.696997] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37072). vm-test-run-hermes-remote> server # [ 297.740527] microvm@hermes-alice[1125]: [ OK ] Started Discard unused filesystem blocks once a week. vm-test-run-hermes-remote> server # [ 297.789545] microvm@hermes-alice[1125]: [ OK ] Started logrotate.timer. vm-test-run-hermes-remote> server # [ 297.813827] microvm@hermes-alice[1125]: [ OK ] Started Daily Cleanup of Temporary Directories. vm-test-run-hermes-remote> server # [ 297.819059] microvm@hermes-alice[1125]: [ OK ] Reached target Timer Units. vm-test-run-hermes-remote> server # [ 297.830809] microvm@hermes-alice[1125]: [ OK ] Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 297.855110] microvm@hermes-alice[1125]: [ OK ] Listening on Nix Daemon Socket. vm-test-run-hermes-remote> server # [ 297.967327] microvm@hermes-alice[1125]: [ OK ] Listening on OpenSSH Server Socket…temd-ssh-generator, AF_UNIX Local). vm-test-run-hermes-remote> server # [ 298.247132] microvm@hermes-alice[1125]: [ OK ] Listening on SSH Socket. vm-test-run-hermes-remote> server # [ 298.316104] microvm@hermes-alice[1125]: [ OK ] Listening on Virtual Machine and C…tainer Registration Service Socket. vm-test-run-hermes-remote> server # [ 298.376363] microvm@hermes-alice[1125]: [ OK ] Reached target Socket Units. vm-test-run-hermes-remote> server # [ 298.376966] microvm@hermes-alice[1125]: [ OK ] Reached target Basic System. vm-test-run-hermes-remote> server # [ 298.600987] systemd[1]: hermes-dashboard-fwd-alice@77-22-127.0.0.1:22901-127.0.0.1:37072.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 298.601600] systemd[1]: hermes-dashboard-fwd-alice@77-22-127.0.0.1:22901-127.0.0.1:37072.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 298.710000] microvm@hermes-alice[1125]: Starting Hermes python venv (pip-writable)... vm-test-run-hermes-remote> server # [ 298.783109] microvm@hermes-alice[1125]: Starting Import lastlog data into lastlog2 database... vm-test-run-hermes-remote> server # [ 299.076231] microvm@hermes-alice[1125]: Starting Logrotate configuration check... vm-test-run-hermes-remote> server # [ 299.421330] microvm@hermes-alice[1125]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 299.830618] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37078). vm-test-run-hermes-remote> server # [ 300.006617] microvm@hermes-alice[1125]: Starting Post-Boot Actions... vm-test-run-hermes-remote> server # [ 300.234121] microvm@hermes-alice[1125]: [ OK ] Started Reset console on configuration changes. vm-test-run-hermes-remote> server # [ 300.685089] systemd[1]: hermes-dashboard-fwd-alice@78-4112-127.0.0.1:22901-127.0.0.1:37078.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 300.685747] systemd[1]: hermes-dashboard-fwd-alice@78-4112-127.0.0.1:22901-127.0.0.1:37078.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 301.020759] microvm@hermes-alice[1125]: Starting D-Bus System Message Bus... vm-test-run-hermes-remote> server # [ 302.208084] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37086). vm-test-run-hermes-remote> server # [ 303.034667] microvm@hermes-alice[1125]: [ *** ] (2 of 7) A start job is running for…k Management (1min 21s / 1min 53s) vm-test-run-hermes-remote> server # [ 303.376204] microvm@hermes-alice[1125]: [ *** ] (2 of 7) A start job is running for…k Management (1min 21s / 1min 53s) vm-test-run-hermes-remote> server # [ 303.762579] microvm@hermes-alice[1125]: [ ***] (2 of 7) A start job is running for…k Management (1min 22s / 1min 53s) vm-test-run-hermes-remote> server # [ 303.981156] systemd[1]: hermes-dashboard-fwd-alice@79-23-127.0.0.1:22901-127.0.0.1:37086.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 303.981983] systemd[1]: hermes-dashboard-fwd-alice@79-23-127.0.0.1:22901-127.0.0.1:37086.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 304.108963] microvm@hermes-alice[1125]: [ **] (3 of 7) A start job is running for…ration check (1min 22s / no limit) vm-test-run-hermes-remote> server # [ 304.309109] microvm@hermes-alice[1125]: [ OK ] Started Network Management. vm-test-run-hermes-remote> server # [ 304.335161] microvm@hermes-alice[1125]: [ OK ] Finished Logrotate configuration check. vm-test-run-hermes-remote> server # [ 304.348458] microvm@hermes-alice[1125]: [ OK ] Finished Post-Boot Actions. vm-test-run-hermes-remote> server # [ 304.371205] microvm@hermes-alice[1125]: [ OK ] Reached target Network. vm-test-run-hermes-remote> server # [ 304.376345] microvm@hermes-alice[1125]: [ OK ] Reached target Network is Online. vm-test-run-hermes-remote> server # [ 304.681467] microvm@hermes-alice[1125]: Starting Enable Persistent Storage in systemd-networkd... vm-test-run-hermes-remote> server # [ 305.056170] microvm@hermes-alice[1125]: [ OK ] Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 305.080405] microvm@hermes-alice[1125]: [ OK ] Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 305.104791] microvm@hermes-alice[1125]: [ OK ] Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 305.134210] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:32892). vm-test-run-hermes-remote> server # [ 305.319945] microvm@hermes-alice[1125]: Starting User Login Management... vm-test-run-hermes-remote> server # [ 305.567357] systemd[1]: hermes-dashboard-fwd-alice@80-4113-127.0.0.1:22901-127.0.0.1:32892.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 305.568389] systemd[1]: hermes-dashboard-fwd-alice@80-4113-127.0.0.1:22901-127.0.0.1:32892.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 305.665235] microvm@hermes-alice[1125]: Starting Permit User Sessions... vm-test-run-hermes-remote> server # [ 306.809480] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:32908). vm-test-run-hermes-remote> server # [ 307.148575] microvm@hermes-alice[1125]: [ *] (1 of 6) A start job is running for…System Message Bus (6s / 1min 30s) vm-test-run-hermes-remote> server # [ 307.188879] systemd[1]: hermes-dashboard-fwd-alice@81-4114-127.0.0.1:22901-127.0.0.1:32908.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 307.203325] systemd[1]: hermes-dashboard-fwd-alice@81-4114-127.0.0.1:22901-127.0.0.1:32908.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 307.487051] microvm@hermes-alice[1125]: [ **] (1 of 6) A start job is running for…System Message Bus (6s / 1min 30s) vm-test-run-hermes-remote> server # [ 307.813901] microvm@hermes-alice[1125]: [ OK ] Finished Import lastlog data into lastlog2 database. vm-test-run-hermes-remote> server # [ 307.928387] microvm@hermes-alice[1125]: [ OK ] Finished Permit User Sessions. vm-test-run-hermes-remote> server # [ 308.097732] microvm@hermes-alice[1125]: [ OK ] Started Getty on tty1. vm-test-run-hermes-remote> server # [ 308.162393] microvm@hermes-alice[1125]: [ OK ] Started Serial Getty on ttyS0. vm-test-run-hermes-remote> server # [ 308.172148] microvm@hermes-alice[1125]: [ OK ] Reached target Login Prompts. vm-test-run-hermes-remote> server # [ 308.517493] microvm@hermes-alice[1125]: [ OK ] Finished Enable Persistent Storage in systemd-networkd. vm-test-run-hermes-remote> server # [ 308.631462] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:32924). vm-test-run-hermes-remote> server # [ 308.990646] microvm@hermes-alice[1125]: [ OK ] Started User Login Management. vm-test-run-hermes-remote> server # [ 309.110310] systemd[1]: hermes-dashboard-fwd-alice@82-24-127.0.0.1:22901-127.0.0.1:32924.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 309.120114] systemd[1]: hermes-dashboard-fwd-alice@82-24-127.0.0.1:22901-127.0.0.1:32924.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 309.451158] microvm@hermes-alice[1125]: Starting linger-users.service... vm-test-run-hermes-remote> server # [ 309.485387] microvm@hermes-alice[1125]: [ OK ] Started D-Bus System Message Bus. vm-test-run-hermes-remote> server # [ 310.354373] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:32928). vm-test-run-hermes-remote> server # [ 310.658678] systemd[1]: hermes-dashboard-fwd-alice@83-25-127.0.0.1:22901-127.0.0.1:32928.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 310.676050] systemd[1]: hermes-dashboard-fwd-alice@83-25-127.0.0.1:22901-127.0.0.1:32928.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 311.894136] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:32938). vm-test-run-hermes-remote> server # [ 312.397730] systemd[1]: hermes-dashboard-fwd-alice@84-26-127.0.0.1:22901-127.0.0.1:32938.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 312.401295] systemd[1]: hermes-dashboard-fwd-alice@84-26-127.0.0.1:22901-127.0.0.1:32938.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 312.545869] microvm@hermes-alice[1125]: [ OK ] Finished linger-users.service. vm-test-run-hermes-remote> server # [ 313.693389] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58224). vm-test-run-hermes-remote> server # [ 314.458145] systemd[1]: hermes-dashboard-fwd-alice@85-12310-127.0.0.1:22901-127.0.0.1:58224.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 314.462945] systemd[1]: hermes-dashboard-fwd-alice@85-12310-127.0.0.1:22901-127.0.0.1:58224.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 315.674232] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58236). vm-test-run-hermes-remote> server # [ 316.381656] systemd[1]: hermes-dashboard-fwd-alice@86-4115-127.0.0.1:22901-127.0.0.1:58236.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 316.386195] systemd[1]: hermes-dashboard-fwd-alice@86-4115-127.0.0.1:22901-127.0.0.1:58236.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 317.678059] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58252). vm-test-run-hermes-remote> server # [ 318.496360] systemd[1]: hermes-dashboard-fwd-alice@87-12311-127.0.0.1:22901-127.0.0.1:58252.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 318.506312] systemd[1]: hermes-dashboard-fwd-alice@87-12311-127.0.0.1:22901-127.0.0.1:58252.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 319.688527] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58254). vm-test-run-hermes-remote> server # [ 319.786251] microvm@hermes-alice[1125]: +q6E616D65 vm-test-run-hermes-remote> server # [ 319.787251] microvm@hermes-alice[1125]: vm-test-run-hermes-remote> server # [ 319.792131] microvm@hermes-alice[1125]: <<< Welcome to NixOS 26.11pre-git (x86_64) - ttyS0 >>> vm-test-run-hermes-remote> server # [ 319.797847] microvm@hermes-alice[1125]: vm-test-run-hermes-remote> server # [ 319.798869] microvm@hermes-alice[1125]: Run 'nixos-help' for the NixOS manual. vm-test-run-hermes-remote> server # [ 319.799915] microvm@hermes-alice[1125]: vm-test-run-hermes-remote> server # [ 320.128512] systemd[1]: hermes-dashboard-fwd-alice@88-12312-127.0.0.1:22901-127.0.0.1:58254.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 320.129215] systemd[1]: hermes-dashboard-fwd-alice@88-12312-127.0.0.1:22901-127.0.0.1:58254.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 321.390375] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58262). vm-test-run-hermes-remote> server # [ 321.919891] systemd[1]: hermes-dashboard-fwd-alice@89-27-127.0.0.1:22901-127.0.0.1:58262.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 321.922543] systemd[1]: hermes-dashboard-fwd-alice@89-27-127.0.0.1:22901-127.0.0.1:58262.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 323.466227] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56862). vm-test-run-hermes-remote> server # [ 323.657607] systemd[1]: hermes-dashboard-fwd-alice@90-12313-127.0.0.1:22901-127.0.0.1:56862.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 323.660880] systemd[1]: hermes-dashboard-fwd-alice@90-12313-127.0.0.1:22901-127.0.0.1:56862.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 324.884300] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56876). vm-test-run-hermes-remote> server # [ 325.234874] systemd[1]: hermes-dashboard-fwd-alice@91-12314-127.0.0.1:22901-127.0.0.1:56876.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 325.237682] systemd[1]: hermes-dashboard-fwd-alice@91-12314-127.0.0.1:22901-127.0.0.1:56876.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 326.439902] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56890). vm-test-run-hermes-remote> server # [ 326.794200] systemd[1]: hermes-dashboard-fwd-alice@92-28-127.0.0.1:22901-127.0.0.1:56890.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 326.799924] systemd[1]: hermes-dashboard-fwd-alice@92-28-127.0.0.1:22901-127.0.0.1:56890.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 328.097462] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56902). vm-test-run-hermes-remote> server # [ 328.328587] systemd[1]: hermes-dashboard-fwd-alice@93-8213-127.0.0.1:22901-127.0.0.1:56902.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 328.329201] systemd[1]: hermes-dashboard-fwd-alice@93-8213-127.0.0.1:22901-127.0.0.1:56902.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 329.758086] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56912). vm-test-run-hermes-remote> server # [ 330.157179] systemd[1]: hermes-dashboard-fwd-alice@94-4116-127.0.0.1:22901-127.0.0.1:56912.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 330.157786] systemd[1]: hermes-dashboard-fwd-alice@94-4116-127.0.0.1:22901-127.0.0.1:56912.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 331.617531] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56916). vm-test-run-hermes-remote> server # [ 332.045479] systemd[1]: hermes-dashboard-fwd-alice@95-8214-127.0.0.1:22901-127.0.0.1:56916.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 332.048160] systemd[1]: hermes-dashboard-fwd-alice@95-8214-127.0.0.1:22901-127.0.0.1:56916.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 333.906353] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49170). vm-test-run-hermes-remote> server # [ 334.291177] systemd[1]: hermes-dashboard-fwd-alice@96-12315-127.0.0.1:22901-127.0.0.1:49170.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 334.291739] systemd[1]: hermes-dashboard-fwd-alice@96-12315-127.0.0.1:22901-127.0.0.1:49170.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 336.088674] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49174). vm-test-run-hermes-remote> server # [ 336.663471] systemd[1]: hermes-dashboard-fwd-alice@97-12316-127.0.0.1:22901-127.0.0.1:49174.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 336.667936] systemd[1]: hermes-dashboard-fwd-alice@97-12316-127.0.0.1:22901-127.0.0.1:49174.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 337.895809] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49178). vm-test-run-hermes-remote> server # [ 338.145196] systemd[1]: hermes-dashboard-fwd-alice@98-29-127.0.0.1:22901-127.0.0.1:49178.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 338.145801] systemd[1]: hermes-dashboard-fwd-alice@98-29-127.0.0.1:22901-127.0.0.1:49178.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 339.985235] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49192). vm-test-run-hermes-remote> server # [ 340.666076] systemd[1]: hermes-dashboard-fwd-alice@99-4117-127.0.0.1:22901-127.0.0.1:49192.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 340.667189] systemd[1]: hermes-dashboard-fwd-alice@99-4117-127.0.0.1:22901-127.0.0.1:49192.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> client # [ 341.508203] systemd[658]: Created slice User Background Tasks Slice. vm-test-run-hermes-remote> client # [ 341.516172] systemd[658]: Starting Cleanup of User's Temporary Files and Directories... vm-test-run-hermes-remote> client # [ 341.731099] systemd[658]: Finished Cleanup of User's Temporary Files and Directories. vm-test-run-hermes-remote> server # [ 341.797660] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49198). vm-test-run-hermes-remote> server # [ 342.181705] systemd[1]: hermes-dashboard-fwd-alice@100-30-127.0.0.1:22901-127.0.0.1:49198.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 342.182305] systemd[1]: hermes-dashboard-fwd-alice@100-30-127.0.0.1:22901-127.0.0.1:49198.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 343.330002] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49172). vm-test-run-hermes-remote> server # [ 343.714750] systemd[1]: hermes-dashboard-fwd-alice@101-4118-127.0.0.1:22901-127.0.0.1:49172.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 343.715320] systemd[1]: hermes-dashboard-fwd-alice@101-4118-127.0.0.1:22901-127.0.0.1:49172.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 345.291191] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49184). vm-test-run-hermes-remote> server # [ 345.558371] systemd[1]: hermes-dashboard-fwd-alice@102-31-127.0.0.1:22901-127.0.0.1:49184.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 345.561215] systemd[1]: hermes-dashboard-fwd-alice@102-31-127.0.0.1:22901-127.0.0.1:49184.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 346.750354] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49186). vm-test-run-hermes-remote> server # [ 347.012046] systemd[1]: hermes-dashboard-fwd-alice@103-4119-127.0.0.1:22901-127.0.0.1:49186.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 347.012636] systemd[1]: hermes-dashboard-fwd-alice@103-4119-127.0.0.1:22901-127.0.0.1:49186.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 348.146059] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49198). vm-test-run-hermes-remote> server # [ 348.482207] systemd[1]: hermes-dashboard-fwd-alice@104-4120-127.0.0.1:22901-127.0.0.1:49198.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 348.484999] systemd[1]: hermes-dashboard-fwd-alice@104-4120-127.0.0.1:22901-127.0.0.1:49198.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 349.683113] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49206). vm-test-run-hermes-remote> server # [ 349.982501] systemd[1]: hermes-dashboard-fwd-alice@105-12317-127.0.0.1:22901-127.0.0.1:49206.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 349.985305] systemd[1]: hermes-dashboard-fwd-alice@105-12317-127.0.0.1:22901-127.0.0.1:49206.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 351.999412] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49222). vm-test-run-hermes-remote> server # [ 352.769899] systemd[1]: hermes-dashboard-fwd-alice@106-32-127.0.0.1:22901-127.0.0.1:49222.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 352.770592] systemd[1]: hermes-dashboard-fwd-alice@106-32-127.0.0.1:22901-127.0.0.1:49222.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 354.291228] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59100). vm-test-run-hermes-remote> server # [ 354.906473] systemd[1]: hermes-dashboard-fwd-alice@107-33-127.0.0.1:22901-127.0.0.1:59100.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 354.948494] systemd[1]: hermes-dashboard-fwd-alice@107-33-127.0.0.1:22901-127.0.0.1:59100.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 357.552816] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59108). vm-test-run-hermes-remote> server # [ 358.218301] systemd[1]: hermes-dashboard-fwd-alice@108-4121-127.0.0.1:22901-127.0.0.1:59108.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 358.221144] systemd[1]: hermes-dashboard-fwd-alice@108-4121-127.0.0.1:22901-127.0.0.1:59108.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 359.672462] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59122). vm-test-run-hermes-remote> server # [ 359.798803] systemd[1]: hermes-dashboard-fwd-alice@109-8215-127.0.0.1:22901-127.0.0.1:59122.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 359.799448] systemd[1]: hermes-dashboard-fwd-alice@109-8215-127.0.0.1:22901-127.0.0.1:59122.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 361.119761] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59138). vm-test-run-hermes-remote> server # [ 361.358214] systemd[1]: hermes-dashboard-fwd-alice@110-4122-127.0.0.1:22901-127.0.0.1:59138.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 361.358761] systemd[1]: hermes-dashboard-fwd-alice@110-4122-127.0.0.1:22901-127.0.0.1:59138.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 362.650945] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59150). vm-test-run-hermes-remote> server # [ 363.476290] systemd[1]: hermes-dashboard-fwd-alice@111-12318-127.0.0.1:22901-127.0.0.1:59150.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 363.476935] systemd[1]: hermes-dashboard-fwd-alice@111-12318-127.0.0.1:22901-127.0.0.1:59150.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 364.845666] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39162). vm-test-run-hermes-remote> server # [ 365.362559] systemd[1]: hermes-dashboard-fwd-alice@112-34-127.0.0.1:22901-127.0.0.1:39162.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 365.363190] systemd[1]: hermes-dashboard-fwd-alice@112-34-127.0.0.1:22901-127.0.0.1:39162.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 366.839522] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39164). vm-test-run-hermes-remote> server # [ 367.468966] systemd[1]: hermes-dashboard-fwd-alice@113-12319-127.0.0.1:22901-127.0.0.1:39164.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 367.469637] systemd[1]: hermes-dashboard-fwd-alice@113-12319-127.0.0.1:22901-127.0.0.1:39164.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 368.771805] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39168). vm-test-run-hermes-remote> server # [ 369.631282] systemd[1]: hermes-dashboard-fwd-alice@114-4123-127.0.0.1:22901-127.0.0.1:39168.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 369.631918] systemd[1]: hermes-dashboard-fwd-alice@114-4123-127.0.0.1:22901-127.0.0.1:39168.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 370.727339] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39180). vm-test-run-hermes-remote> server # [ 370.909080] systemd[1]: hermes-dashboard-fwd-alice@115-4124-127.0.0.1:22901-127.0.0.1:39180.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 370.909646] systemd[1]: hermes-dashboard-fwd-alice@115-4124-127.0.0.1:22901-127.0.0.1:39180.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 372.218116] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39190). vm-test-run-hermes-remote> server # [ 372.658296] systemd[1]: hermes-dashboard-fwd-alice@116-35-127.0.0.1:22901-127.0.0.1:39190.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 372.658839] systemd[1]: hermes-dashboard-fwd-alice@116-35-127.0.0.1:22901-127.0.0.1:39190.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 373.995206] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34774). vm-test-run-hermes-remote> server # [ 374.444691] systemd[1]: hermes-dashboard-fwd-alice@117-4125-127.0.0.1:22901-127.0.0.1:34774.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 374.445348] systemd[1]: hermes-dashboard-fwd-alice@117-4125-127.0.0.1:22901-127.0.0.1:34774.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 376.039288] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34782). vm-test-run-hermes-remote> server # [ 376.468052] systemd[1]: hermes-dashboard-fwd-alice@118-12320-127.0.0.1:22901-127.0.0.1:34782.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 376.468632] systemd[1]: hermes-dashboard-fwd-alice@118-12320-127.0.0.1:22901-127.0.0.1:34782.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 377.909736] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34786). vm-test-run-hermes-remote> server # [ 378.409399] systemd[1]: hermes-dashboard-fwd-alice@119-36-127.0.0.1:22901-127.0.0.1:34786.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 378.412225] systemd[1]: hermes-dashboard-fwd-alice@119-36-127.0.0.1:22901-127.0.0.1:34786.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 379.794149] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34800). vm-test-run-hermes-remote> server # [ 380.080078] systemd[1]: hermes-dashboard-fwd-alice@120-8216-127.0.0.1:22901-127.0.0.1:34800.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 380.097390] systemd[1]: hermes-dashboard-fwd-alice@120-8216-127.0.0.1:22901-127.0.0.1:34800.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 381.622389] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34812). vm-test-run-hermes-remote> server # [ 382.546042] systemd[1]: hermes-dashboard-fwd-alice@121-37-127.0.0.1:22901-127.0.0.1:34812.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 382.546623] systemd[1]: hermes-dashboard-fwd-alice@121-37-127.0.0.1:22901-127.0.0.1:34812.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 383.977556] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:52114). vm-test-run-hermes-remote> server # [ 384.312081] systemd[1]: hermes-dashboard-fwd-alice@122-4126-127.0.0.1:22901-127.0.0.1:52114.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 384.312614] systemd[1]: hermes-dashboard-fwd-alice@122-4126-127.0.0.1:22901-127.0.0.1:52114.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 385.487270] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:52118). vm-test-run-hermes-remote> server # [ 386.100453] systemd[1]: hermes-dashboard-fwd-alice@123-38-127.0.0.1:22901-127.0.0.1:52118.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 386.170948] systemd[1]: hermes-dashboard-fwd-alice@123-38-127.0.0.1:22901-127.0.0.1:52118.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 389.178594] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:52120). vm-test-run-hermes-remote> server # [ 391.566221] systemd[1]: hermes-dashboard-fwd-alice@124-4127-127.0.0.1:22901-127.0.0.1:52120.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 391.567091] systemd[1]: hermes-dashboard-fwd-alice@124-4127-127.0.0.1:22901-127.0.0.1:52120.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 393.716288] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40950). vm-test-run-hermes-remote> server # [ 394.086416] systemd[1]: hermes-dashboard-fwd-alice@125-39-127.0.0.1:22901-127.0.0.1:40950.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 394.087051] systemd[1]: hermes-dashboard-fwd-alice@125-39-127.0.0.1:22901-127.0.0.1:40950.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 397.743057] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40964). vm-test-run-hermes-remote> server # [ 399.908921] systemd[1]: hermes-dashboard-fwd-alice@126-4128-127.0.0.1:22901-127.0.0.1:40964.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 399.909518] systemd[1]: hermes-dashboard-fwd-alice@126-4128-127.0.0.1:22901-127.0.0.1:40964.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 402.063123] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40978). vm-test-run-hermes-remote> server # [ 403.225248] systemd[1]: hermes-dashboard-fwd-alice@127-12321-127.0.0.1:22901-127.0.0.1:40978.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 403.225829] systemd[1]: hermes-dashboard-fwd-alice@127-12321-127.0.0.1:22901-127.0.0.1:40978.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 404.514221] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59700). vm-test-run-hermes-remote> server # [ 406.252167] systemd[1]: hermes-dashboard-fwd-alice@128-40-127.0.0.1:22901-127.0.0.1:59700.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 406.273451] systemd[1]: hermes-dashboard-fwd-alice@128-40-127.0.0.1:22901-127.0.0.1:59700.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 409.695439] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59714). vm-test-run-hermes-remote> server # [ 412.453815] systemd[1]: hermes-dashboard-fwd-alice@129-4129-127.0.0.1:22901-127.0.0.1:59714.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 412.454530] systemd[1]: hermes-dashboard-fwd-alice@129-4129-127.0.0.1:22901-127.0.0.1:59714.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 413.590508] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47242). vm-test-run-hermes-remote> server # [ 414.004386] systemd[1]: hermes-dashboard-fwd-alice@130-8217-127.0.0.1:22901-127.0.0.1:47242.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 414.004995] systemd[1]: hermes-dashboard-fwd-alice@130-8217-127.0.0.1:22901-127.0.0.1:47242.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 415.209853] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47252). vm-test-run-hermes-remote> server # [ 415.655250] systemd[1]: hermes-dashboard-fwd-alice@131-41-127.0.0.1:22901-127.0.0.1:47252.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 415.655872] systemd[1]: hermes-dashboard-fwd-alice@131-41-127.0.0.1:22901-127.0.0.1:47252.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 416.989249] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47254). vm-test-run-hermes-remote> server # [ 417.225888] systemd[1]: hermes-dashboard-fwd-alice@132-42-127.0.0.1:22901-127.0.0.1:47254.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 417.226489] systemd[1]: hermes-dashboard-fwd-alice@132-42-127.0.0.1:22901-127.0.0.1:47254.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 419.070313] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47258). vm-test-run-hermes-remote> server # [ 419.284825] systemd[1]: hermes-dashboard-fwd-alice@133-8218-127.0.0.1:22901-127.0.0.1:47258.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 419.285505] systemd[1]: hermes-dashboard-fwd-alice@133-8218-127.0.0.1:22901-127.0.0.1:47258.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 420.599828] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47264). vm-test-run-hermes-remote> server # [ 420.952249] systemd[1]: hermes-dashboard-fwd-alice@134-8219-127.0.0.1:22901-127.0.0.1:47264.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 420.952822] systemd[1]: hermes-dashboard-fwd-alice@134-8219-127.0.0.1:22901-127.0.0.1:47264.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 422.205152] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47270). vm-test-run-hermes-remote> server # [ 422.813098] systemd[1]: hermes-dashboard-fwd-alice@135-43-127.0.0.1:22901-127.0.0.1:47270.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 422.819063] systemd[1]: hermes-dashboard-fwd-alice@135-43-127.0.0.1:22901-127.0.0.1:47270.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 424.118457] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36664). vm-test-run-hermes-remote> server # [ 424.693586] systemd[1]: hermes-dashboard-fwd-alice@136-44-127.0.0.1:22901-127.0.0.1:36664.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 424.694210] systemd[1]: hermes-dashboard-fwd-alice@136-44-127.0.0.1:22901-127.0.0.1:36664.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 425.879670] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36678). vm-test-run-hermes-remote> server # [ 426.199739] systemd[1]: hermes-dashboard-fwd-alice@137-8220-127.0.0.1:22901-127.0.0.1:36678.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 426.200357] systemd[1]: hermes-dashboard-fwd-alice@137-8220-127.0.0.1:22901-127.0.0.1:36678.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 427.324197] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36684). vm-test-run-hermes-remote> server # [ 427.867922] systemd[1]: hermes-dashboard-fwd-alice@138-4130-127.0.0.1:22901-127.0.0.1:36684.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 427.868623] systemd[1]: hermes-dashboard-fwd-alice@138-4130-127.0.0.1:22901-127.0.0.1:36684.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 429.235201] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36700). vm-test-run-hermes-remote> server # [ 429.748219] systemd[1]: hermes-dashboard-fwd-alice@139-12322-127.0.0.1:22901-127.0.0.1:36700.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 429.748822] systemd[1]: hermes-dashboard-fwd-alice@139-12322-127.0.0.1:22901-127.0.0.1:36700.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 431.001296] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36708). vm-test-run-hermes-remote> server # [ 431.347953] systemd[1]: hermes-dashboard-fwd-alice@140-45-127.0.0.1:22901-127.0.0.1:36708.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 431.348537] systemd[1]: hermes-dashboard-fwd-alice@140-45-127.0.0.1:22901-127.0.0.1:36708.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 432.484309] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36720). vm-test-run-hermes-remote> server # [ 433.048448] systemd[1]: hermes-dashboard-fwd-alice@141-4131-127.0.0.1:22901-127.0.0.1:36720.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 433.053959] systemd[1]: hermes-dashboard-fwd-alice@141-4131-127.0.0.1:22901-127.0.0.1:36720.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 434.262856] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41228). vm-test-run-hermes-remote> server # [ 434.432951] systemd[1]: hermes-dashboard-fwd-alice@142-12323-127.0.0.1:22901-127.0.0.1:41228.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 434.436999] systemd[1]: hermes-dashboard-fwd-alice@142-12323-127.0.0.1:22901-127.0.0.1:41228.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 435.639309] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41244). vm-test-run-hermes-remote> server # [ 436.158887] systemd[1]: hermes-dashboard-fwd-alice@143-12324-127.0.0.1:22901-127.0.0.1:41244.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 436.159518] systemd[1]: hermes-dashboard-fwd-alice@143-12324-127.0.0.1:22901-127.0.0.1:41244.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 437.307972] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41252). vm-test-run-hermes-remote> server # [ 437.314897] systemd[1180]: Created slice User Background Tasks Slice. vm-test-run-hermes-remote> server # [ 437.353189] systemd[1180]: Starting Cleanup of User's Temporary Files and Directories... vm-test-run-hermes-remote> server # [ 437.655218] systemd[1]: hermes-dashboard-fwd-alice@144-4132-127.0.0.1:22901-127.0.0.1:41252.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 437.655838] systemd[1]: hermes-dashboard-fwd-alice@144-4132-127.0.0.1:22901-127.0.0.1:41252.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 437.686552] systemd[1180]: Finished Cleanup of User's Temporary Files and Directories. vm-test-run-hermes-remote> server # [ 438.991185] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41264). vm-test-run-hermes-remote> server # [ 439.707885] systemd[1]: hermes-dashboard-fwd-alice@145-8221-127.0.0.1:22901-127.0.0.1:41264.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 440.922080] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41270). vm-test-run-hermes-remote> server # [ 441.696646] systemd[1]: hermes-dashboard-fwd-alice@146-4133-127.0.0.1:22901-127.0.0.1:41270.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 442.985383] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41280). vm-test-run-hermes-remote> server # [ 443.459868] systemd[1]: hermes-dashboard-fwd-alice@147-4134-127.0.0.1:22901-127.0.0.1:41280.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 443.460910] systemd[1]: hermes-dashboard-fwd-alice@147-4134-127.0.0.1:22901-127.0.0.1:41280.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 444.830348] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36434). vm-test-run-hermes-remote> server # [ 445.672951] systemd[1]: hermes-dashboard-fwd-alice@148-4135-127.0.0.1:22901-127.0.0.1:36434.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 447.330286] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36438). vm-test-run-hermes-remote> server # [ 448.240246] systemd[1]: hermes-dashboard-fwd-alice@149-4136-127.0.0.1:22901-127.0.0.1:36438.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 449.636544] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36440). vm-test-run-hermes-remote> server # [ 450.608365] systemd[1]: hermes-dashboard-fwd-alice@150-8222-127.0.0.1:22901-127.0.0.1:36440.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 452.109364] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36446). vm-test-run-hermes-remote> server # [ 453.015596] systemd[1]: hermes-dashboard-fwd-alice@151-46-127.0.0.1:22901-127.0.0.1:36446.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 454.350896] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34122). vm-test-run-hermes-remote> server # [ 455.074672] systemd[1]: hermes-dashboard-fwd-alice@152-4137-127.0.0.1:22901-127.0.0.1:34122.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 456.321881] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34128). vm-test-run-hermes-remote> server # [ 457.185104] systemd[1]: hermes-dashboard-fwd-alice@153-47-127.0.0.1:22901-127.0.0.1:34128.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 458.769795] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34144). vm-test-run-hermes-remote> server # [ 459.870650] systemd[1]: hermes-dashboard-fwd-alice@154-4138-127.0.0.1:22901-127.0.0.1:34144.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 461.122368] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34160). vm-test-run-hermes-remote> server # [ 461.886964] systemd[1]: hermes-dashboard-fwd-alice@155-8223-127.0.0.1:22901-127.0.0.1:34160.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 463.168967] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34172). vm-test-run-hermes-remote> server # [ 464.032804] systemd[1]: hermes-dashboard-fwd-alice@156-48-127.0.0.1:22901-127.0.0.1:34172.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 465.352488] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35534). vm-test-run-hermes-remote> server # [ 466.375777] systemd[1]: hermes-dashboard-fwd-alice@157-4139-127.0.0.1:22901-127.0.0.1:35534.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 467.636889] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35540). vm-test-run-hermes-remote> server # [ 468.785112] systemd[1]: hermes-dashboard-fwd-alice@158-12325-127.0.0.1:22901-127.0.0.1:35540.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 470.070160] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35552). vm-test-run-hermes-remote> server # [ 471.195129] systemd[1]: hermes-dashboard-fwd-alice@159-8224-127.0.0.1:22901-127.0.0.1:35552.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 472.476144] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:35566). vm-test-run-hermes-remote> server # [ 473.653221] systemd[1]: hermes-dashboard-fwd-alice@160-12326-127.0.0.1:22901-127.0.0.1:35566.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 475.455895] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60962). vm-test-run-hermes-remote> server # [ 476.636753] systemd[1]: hermes-dashboard-fwd-alice@161-12327-127.0.0.1:22901-127.0.0.1:60962.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 478.515309] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60976). vm-test-run-hermes-remote> server # [ 479.597941] systemd[1]: hermes-dashboard-fwd-alice@162-8225-127.0.0.1:22901-127.0.0.1:60976.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 481.000505] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60988). vm-test-run-hermes-remote> server # [ 481.881940] systemd[1]: hermes-dashboard-fwd-alice@163-49-127.0.0.1:22901-127.0.0.1:60988.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 483.302856] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39878). vm-test-run-hermes-remote> server # [ 484.255918] systemd[1]: hermes-dashboard-fwd-alice@164-8226-127.0.0.1:22901-127.0.0.1:39878.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 485.451511] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39884). vm-test-run-hermes-remote> server # [ 486.161216] systemd[1]: hermes-dashboard-fwd-alice@165-50-127.0.0.1:22901-127.0.0.1:39884.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 487.816987] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39900). vm-test-run-hermes-remote> server # [ 488.640048] systemd[1]: hermes-dashboard-fwd-alice@166-51-127.0.0.1:22901-127.0.0.1:39900.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 490.036235] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39910). vm-test-run-hermes-remote> server # [ 491.263060] systemd[1]: hermes-dashboard-fwd-alice@167-52-127.0.0.1:22901-127.0.0.1:39910.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 492.491113] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:39918). vm-test-run-hermes-remote> server # [ 493.535939] systemd[1]: hermes-dashboard-fwd-alice@168-8227-127.0.0.1:22901-127.0.0.1:39918.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 494.882403] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42690). vm-test-run-hermes-remote> server # [ 495.663450] systemd[1]: hermes-dashboard-fwd-alice@169-8228-127.0.0.1:22901-127.0.0.1:42690.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 496.903084] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42706). vm-test-run-hermes-remote> server # [ 497.921336] systemd[1]: hermes-dashboard-fwd-alice@170-53-127.0.0.1:22901-127.0.0.1:42706.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 499.466243] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42718). vm-test-run-hermes-remote> server # [ 500.760416] systemd[1]: hermes-dashboard-fwd-alice@171-54-127.0.0.1:22901-127.0.0.1:42718.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 502.162188] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42726). vm-test-run-hermes-remote> server # [ 503.114295] systemd[1]: hermes-dashboard-fwd-alice@172-4140-127.0.0.1:22901-127.0.0.1:42726.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 504.336196] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54698). vm-test-run-hermes-remote> server # [ 505.189760] systemd[1]: hermes-dashboard-fwd-alice@173-8229-127.0.0.1:22901-127.0.0.1:54698.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 507.113628] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54704). vm-test-run-hermes-remote> server # [ 507.942178] systemd[1]: hermes-dashboard-fwd-alice@174-4141-127.0.0.1:22901-127.0.0.1:54704.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 509.195048] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54710). vm-test-run-hermes-remote> server # [ 510.007075] systemd[1]: hermes-dashboard-fwd-alice@175-8230-127.0.0.1:22901-127.0.0.1:54710.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 511.546754] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54722). vm-test-run-hermes-remote> server # [ 512.275410] systemd[1]: hermes-dashboard-fwd-alice@176-4142-127.0.0.1:22901-127.0.0.1:54722.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 513.461272] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55304). vm-test-run-hermes-remote> server # [ 514.314856] systemd[1]: hermes-dashboard-fwd-alice@177-55-127.0.0.1:22901-127.0.0.1:55304.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 515.613293] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55316). vm-test-run-hermes-remote> server # [ 516.881877] systemd[1]: hermes-dashboard-fwd-alice@178-4143-127.0.0.1:22901-127.0.0.1:55316.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 518.153973] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55326). vm-test-run-hermes-remote> server # [ 519.450966] systemd[1]: hermes-dashboard-fwd-alice@179-4144-127.0.0.1:22901-127.0.0.1:55326.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 520.652385] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55330). vm-test-run-hermes-remote> server # [ 521.435638] systemd[1]: hermes-dashboard-fwd-alice@180-8231-127.0.0.1:22901-127.0.0.1:55330.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 522.852201] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55336). vm-test-run-hermes-remote> server # [ 523.764913] systemd[1]: hermes-dashboard-fwd-alice@181-12328-127.0.0.1:22901-127.0.0.1:55336.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 525.177661] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45132). vm-test-run-hermes-remote> server # [ 526.088583] systemd[1]: hermes-dashboard-fwd-alice@182-56-127.0.0.1:22901-127.0.0.1:45132.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 527.730635] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45144). vm-test-run-hermes-remote> server # [ 528.642654] systemd[1]: hermes-dashboard-fwd-alice@183-12329-127.0.0.1:22901-127.0.0.1:45144.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 530.387063] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45148). vm-test-run-hermes-remote> server # [ 531.290086] systemd[1]: hermes-dashboard-fwd-alice@184-57-127.0.0.1:22901-127.0.0.1:45148.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 533.284717] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45894). vm-test-run-hermes-remote> server # [ 534.310924] systemd[1]: hermes-dashboard-fwd-alice@185-12330-127.0.0.1:22901-127.0.0.1:45894.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 535.506304] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45908). vm-test-run-hermes-remote> server # [ 536.215609] systemd[1]: hermes-dashboard-fwd-alice@186-58-127.0.0.1:22901-127.0.0.1:45908.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 537.853400] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45924). vm-test-run-hermes-remote> server # [ 538.602513] systemd[1]: hermes-dashboard-fwd-alice@187-12331-127.0.0.1:22901-127.0.0.1:45924.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 539.796111] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45932). vm-test-run-hermes-remote> server # [ 540.757239] systemd[1]: hermes-dashboard-fwd-alice@188-8232-127.0.0.1:22901-127.0.0.1:45932.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 542.318788] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45934). vm-test-run-hermes-remote> server # [ 543.330778] systemd[1]: hermes-dashboard-fwd-alice@189-4145-127.0.0.1:22901-127.0.0.1:45934.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 544.583398] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55248). vm-test-run-hermes-remote> server # [ 545.693732] systemd[1]: hermes-dashboard-fwd-alice@190-12332-127.0.0.1:22901-127.0.0.1:55248.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 547.362190] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55260). vm-test-run-hermes-remote> server # [ 548.125667] systemd[1]: hermes-dashboard-fwd-alice@191-59-127.0.0.1:22901-127.0.0.1:55260.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 549.548165] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55272). vm-test-run-hermes-remote> server # [ 550.638775] systemd[1]: hermes-dashboard-fwd-alice@192-4146-127.0.0.1:22901-127.0.0.1:55272.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 552.000218] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55280). vm-test-run-hermes-remote> server # [ 552.812945] systemd[1]: hermes-dashboard-fwd-alice@193-60-127.0.0.1:22901-127.0.0.1:55280.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 554.026970] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34294). vm-test-run-hermes-remote> server # [ 554.933899] systemd[1]: hermes-dashboard-fwd-alice@194-61-127.0.0.1:22901-127.0.0.1:34294.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 556.279761] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34298). vm-test-run-hermes-remote> server # [ 557.561989] systemd[1]: hermes-dashboard-fwd-alice@195-12333-127.0.0.1:22901-127.0.0.1:34298.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 558.982263] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34312). vm-test-run-hermes-remote> server # [ 559.794553] systemd[1]: hermes-dashboard-fwd-alice@196-12334-127.0.0.1:22901-127.0.0.1:34312.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 561.052325] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34320). vm-test-run-hermes-remote> server # [ 561.978325] systemd[1]: hermes-dashboard-fwd-alice@197-8233-127.0.0.1:22901-127.0.0.1:34320.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 563.403201] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41222). vm-test-run-hermes-remote> server # [ 564.638270] systemd[1]: hermes-dashboard-fwd-alice@198-8234-127.0.0.1:22901-127.0.0.1:41222.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 566.055270] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41228). vm-test-run-hermes-remote> server # [ 567.065880] systemd[1]: hermes-dashboard-fwd-alice@199-8235-127.0.0.1:22901-127.0.0.1:41228.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 568.246117] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41230). vm-test-run-hermes-remote> server # [ 569.377269] systemd[1]: hermes-dashboard-fwd-alice@200-8236-127.0.0.1:22901-127.0.0.1:41230.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 570.863228] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41236). vm-test-run-hermes-remote> server # [ 571.750850] systemd[1]: hermes-dashboard-fwd-alice@201-8237-127.0.0.1:22901-127.0.0.1:41236.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 573.053766] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:41242). vm-test-run-hermes-remote> server # [ 573.770523] systemd[1]: hermes-dashboard-fwd-alice@202-4147-127.0.0.1:22901-127.0.0.1:41242.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 574.976396] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40186). vm-test-run-hermes-remote> server # [ 576.132740] systemd[1]: hermes-dashboard-fwd-alice@203-62-127.0.0.1:22901-127.0.0.1:40186.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 577.573218] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40200). vm-test-run-hermes-remote> server # [ 578.550309] systemd[1]: hermes-dashboard-fwd-alice@204-8238-127.0.0.1:22901-127.0.0.1:40200.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 579.940696] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40208). vm-test-run-hermes-remote> server # [ 581.067373] systemd[1]: hermes-dashboard-fwd-alice@205-8239-127.0.0.1:22901-127.0.0.1:40208.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 582.900161] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40218). vm-test-run-hermes-remote> server # [ 583.776522] systemd[1]: hermes-dashboard-fwd-alice@206-4148-127.0.0.1:22901-127.0.0.1:40218.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 585.089052] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:32830). vm-test-run-hermes-remote> server # [ 585.848005] systemd[1]: hermes-dashboard-fwd-alice@207-4149-127.0.0.1:22901-127.0.0.1:32830.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 587.059698] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:32842). vm-test-run-hermes-remote> server # [ 588.301225] systemd[1]: hermes-dashboard-fwd-alice@208-8240-127.0.0.1:22901-127.0.0.1:32842.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 589.478885] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:32858). vm-test-run-hermes-remote> server # [ 590.527688] systemd[1]: hermes-dashboard-fwd-alice@209-63-127.0.0.1:22901-127.0.0.1:32858.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 591.994207] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:32862). vm-test-run-hermes-remote> server # [ 592.830131] systemd[1]: hermes-dashboard-fwd-alice@210-12335-127.0.0.1:22901-127.0.0.1:32862.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 594.179466] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34860). vm-test-run-hermes-remote> server # [ 594.938126] systemd[1]: hermes-dashboard-fwd-alice@211-64-127.0.0.1:22901-127.0.0.1:34860.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 596.287684] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34866). vm-test-run-hermes-remote> server # [ 597.735898] systemd[1]: hermes-dashboard-fwd-alice@212-65-127.0.0.1:22901-127.0.0.1:34866.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 599.393362] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34878). vm-test-run-hermes-remote> server # [ 600.134457] systemd[1]: hermes-dashboard-fwd-alice@213-8241-127.0.0.1:22901-127.0.0.1:34878.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 601.869719] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:34886). vm-test-run-hermes-remote> server # [ 602.716187] systemd[1]: hermes-dashboard-fwd-alice@214-8242-127.0.0.1:22901-127.0.0.1:34886.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 604.116130] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55770). vm-test-run-hermes-remote> server # [ 604.823876] systemd[1]: hermes-dashboard-fwd-alice@215-8243-127.0.0.1:22901-127.0.0.1:55770.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 606.943772] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55780). vm-test-run-hermes-remote> server # [ 607.963236] systemd[1]: hermes-dashboard-fwd-alice@216-66-127.0.0.1:22901-127.0.0.1:55780.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 609.621396] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55790). vm-test-run-hermes-remote> server # [ 610.643256] systemd[1]: hermes-dashboard-fwd-alice@217-4150-127.0.0.1:22901-127.0.0.1:55790.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 612.517359] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55798). vm-test-run-hermes-remote> server # [ 613.785124] systemd[1]: hermes-dashboard-fwd-alice@218-4151-127.0.0.1:22901-127.0.0.1:55798.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 615.058214] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54770). vm-test-run-hermes-remote> server # [ 616.275844] systemd[1]: hermes-dashboard-fwd-alice@219-67-127.0.0.1:22901-127.0.0.1:54770.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 617.669170] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54784). vm-test-run-hermes-remote> server # [ 619.075080] systemd[1]: hermes-dashboard-fwd-alice@220-12336-127.0.0.1:22901-127.0.0.1:54784.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 620.411464] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54800). vm-test-run-hermes-remote> server # [ 621.393153] systemd[1]: hermes-dashboard-fwd-alice@221-8244-127.0.0.1:22901-127.0.0.1:54800.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 622.853421] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54814). vm-test-run-hermes-remote> server # [ 623.921143] systemd[1]: hermes-dashboard-fwd-alice@222-8245-127.0.0.1:22901-127.0.0.1:54814.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 625.209765] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58310). vm-test-run-hermes-remote> server # [ 625.955252] systemd[1]: hermes-dashboard-fwd-alice@223-8246-127.0.0.1:22901-127.0.0.1:58310.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 627.905197] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58316). vm-test-run-hermes-remote> server # [ 629.500303] systemd[1]: hermes-dashboard-fwd-alice@224-68-127.0.0.1:22901-127.0.0.1:58316.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 631.311839] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58318). vm-test-run-hermes-remote> server # [ 632.572805] systemd[1]: hermes-dashboard-fwd-alice@225-4152-127.0.0.1:22901-127.0.0.1:58318.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 633.919449] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36536). vm-test-run-hermes-remote> server # [ 635.072889] systemd[1]: hermes-dashboard-fwd-alice@226-4153-127.0.0.1:22901-127.0.0.1:36536.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 636.448886] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36540). vm-test-run-hermes-remote> server # [ 637.242458] systemd[1]: hermes-dashboard-fwd-alice@227-69-127.0.0.1:22901-127.0.0.1:36540.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 638.508837] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36542). vm-test-run-hermes-remote> server # [ 639.327744] systemd[1]: hermes-dashboard-fwd-alice@228-12337-127.0.0.1:22901-127.0.0.1:36542.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 640.889097] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36544). vm-test-run-hermes-remote> server # [ 641.887443] systemd[1]: hermes-dashboard-fwd-alice@229-70-127.0.0.1:22901-127.0.0.1:36544.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 643.933622] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49770). vm-test-run-hermes-remote> server # [ 644.804466] systemd[1]: hermes-dashboard-fwd-alice@230-4154-127.0.0.1:22901-127.0.0.1:49770.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 646.001765] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49774). vm-test-run-hermes-remote> server # [ 647.262678] systemd[1]: hermes-dashboard-fwd-alice@231-12338-127.0.0.1:22901-127.0.0.1:49774.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 648.586319] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49784). vm-test-run-hermes-remote> server # [ 649.625859] systemd[1]: hermes-dashboard-fwd-alice@232-12339-127.0.0.1:22901-127.0.0.1:49784.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 651.072697] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49792). vm-test-run-hermes-remote> server # [ 652.105335] systemd[1]: hermes-dashboard-fwd-alice@233-12340-127.0.0.1:22901-127.0.0.1:49792.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 653.960251] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55944). vm-test-run-hermes-remote> server # [ 655.240227] systemd[1]: hermes-dashboard-fwd-alice@234-4155-127.0.0.1:22901-127.0.0.1:55944.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 657.398245] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55950). vm-test-run-hermes-remote> server # [ 658.672804] systemd[1]: hermes-dashboard-fwd-alice@235-12341-127.0.0.1:22901-127.0.0.1:55950.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 660.097549] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55962). vm-test-run-hermes-remote> server # [ 661.314555] systemd[1]: hermes-dashboard-fwd-alice@236-71-127.0.0.1:22901-127.0.0.1:55962.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 662.479395] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55966). vm-test-run-hermes-remote> server # [ 663.711795] systemd[1]: hermes-dashboard-fwd-alice@237-72-127.0.0.1:22901-127.0.0.1:55966.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 665.245516] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37690). vm-test-run-hermes-remote> server # [ 666.283386] systemd[1]: hermes-dashboard-fwd-alice@238-8247-127.0.0.1:22901-127.0.0.1:37690.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 668.048902] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37694). vm-test-run-hermes-remote> server # [ 669.406560] systemd[1]: hermes-dashboard-fwd-alice@239-4156-127.0.0.1:22901-127.0.0.1:37694.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 670.973550] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37708). vm-test-run-hermes-remote> server # [ 671.855076] systemd[1]: hermes-dashboard-fwd-alice@240-4157-127.0.0.1:22901-127.0.0.1:37708.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 673.613181] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60198). vm-test-run-hermes-remote> server # [ 674.935918] systemd[1]: hermes-dashboard-fwd-alice@241-8248-127.0.0.1:22901-127.0.0.1:60198.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 676.380985] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60202). vm-test-run-hermes-remote> server # [ 677.508692] systemd[1]: hermes-dashboard-fwd-alice@242-73-127.0.0.1:22901-127.0.0.1:60202.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 679.587181] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60204). vm-test-run-hermes-remote> server # [ 680.903952] systemd[1]: hermes-dashboard-fwd-alice@243-8249-127.0.0.1:22901-127.0.0.1:60204.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 682.751226] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60212). vm-test-run-hermes-remote> server # [ 684.017816] systemd[1]: hermes-dashboard-fwd-alice@244-12342-127.0.0.1:22901-127.0.0.1:60212.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 685.961823] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59800). vm-test-run-hermes-remote> server # [ 686.928589] systemd[1]: hermes-dashboard-fwd-alice@245-4158-127.0.0.1:22901-127.0.0.1:59800.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 688.834223] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59814). vm-test-run-hermes-remote> server # [ 689.857166] systemd[1]: hermes-dashboard-fwd-alice@246-4159-127.0.0.1:22901-127.0.0.1:59814.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 691.615781] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59816). vm-test-run-hermes-remote> server # [ 692.384183] systemd[1]: hermes-dashboard-fwd-alice@247-12343-127.0.0.1:22901-127.0.0.1:59816.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 693.698876] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59676). vm-test-run-hermes-remote> server # [ 694.492359] systemd[1]: hermes-dashboard-fwd-alice@248-12344-127.0.0.1:22901-127.0.0.1:59676.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 696.596292] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59690). vm-test-run-hermes-remote> server # [ 697.405627] systemd[1]: hermes-dashboard-fwd-alice@249-74-127.0.0.1:22901-127.0.0.1:59690.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 698.735598] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59694). vm-test-run-hermes-remote> server # [ 699.523137] systemd[1]: hermes-dashboard-fwd-alice@250-75-127.0.0.1:22901-127.0.0.1:59694.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 701.210196] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59698). vm-test-run-hermes-remote> server # [ 702.271058] systemd[1]: hermes-dashboard-fwd-alice@251-8250-127.0.0.1:22901-127.0.0.1:59698.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 703.685300] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54968). vm-test-run-hermes-remote> server # [ 704.900243] systemd[1]: hermes-dashboard-fwd-alice@252-8251-127.0.0.1:22901-127.0.0.1:54968.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 706.351427] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54976). vm-test-run-hermes-remote> server # [ 707.723466] systemd[1]: hermes-dashboard-fwd-alice@253-12345-127.0.0.1:22901-127.0.0.1:54976.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 708.934233] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54992). vm-test-run-hermes-remote> server # [ 710.105421] systemd[1]: hermes-dashboard-fwd-alice@254-8252-127.0.0.1:22901-127.0.0.1:54992.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 711.933230] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54996). vm-test-run-hermes-remote> server # [ 712.573932] systemd[1]: hermes-dashboard-fwd-alice@255-12346-127.0.0.1:22901-127.0.0.1:54996.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 713.927772] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:52902). vm-test-run-hermes-remote> server # [ 715.048181] systemd[1]: hermes-dashboard-fwd-alice@256-4160-127.0.0.1:22901-127.0.0.1:52902.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 717.135835] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:52914). vm-test-run-hermes-remote> server # [ 718.032684] systemd[1]: hermes-dashboard-fwd-alice@257-12347-127.0.0.1:22901-127.0.0.1:52914.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 719.970595] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:52922). vm-test-run-hermes-remote> server # [ 720.852238] systemd[1]: hermes-dashboard-fwd-alice@258-76-127.0.0.1:22901-127.0.0.1:52922.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 722.256036] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:52938). vm-test-run-hermes-remote> server # [ 723.204797] systemd[1]: hermes-dashboard-fwd-alice@259-8253-127.0.0.1:22901-127.0.0.1:52938.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 724.951419] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60676). vm-test-run-hermes-remote> server # [ 725.730378] systemd[1]: hermes-dashboard-fwd-alice@260-12348-127.0.0.1:22901-127.0.0.1:60676.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 727.259554] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60680). vm-test-run-hermes-remote> server # [ 727.984550] systemd[1]: hermes-dashboard-fwd-alice@261-77-127.0.0.1:22901-127.0.0.1:60680.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 729.226816] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60682). vm-test-run-hermes-remote> server # [ 729.994690] systemd[1]: hermes-dashboard-fwd-alice@262-4161-127.0.0.1:22901-127.0.0.1:60682.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 731.213662] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60686). vm-test-run-hermes-remote> server # [ 731.987123] systemd[1]: hermes-dashboard-fwd-alice@263-12349-127.0.0.1:22901-127.0.0.1:60686.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 733.664497] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36182). vm-test-run-hermes-remote> server # [ 734.407773] systemd[1]: hermes-dashboard-fwd-alice@264-78-127.0.0.1:22901-127.0.0.1:36182.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 735.616159] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36196). vm-test-run-hermes-remote> server # [ 736.432541] systemd[1]: hermes-dashboard-fwd-alice@265-4162-127.0.0.1:22901-127.0.0.1:36196.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 737.701101] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36202). vm-test-run-hermes-remote> server # [ 739.177077] systemd[1]: hermes-dashboard-fwd-alice@266-12350-127.0.0.1:22901-127.0.0.1:36202.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 740.455359] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36208). vm-test-run-hermes-remote> server # [ 741.381809] systemd[1]: hermes-dashboard-fwd-alice@267-12351-127.0.0.1:22901-127.0.0.1:36208.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 742.611059] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:36212). vm-test-run-hermes-remote> server # [ 743.313279] systemd[1]: hermes-dashboard-fwd-alice@268-12352-127.0.0.1:22901-127.0.0.1:36212.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 744.689869] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54400). vm-test-run-hermes-remote> server # [ 745.616207] systemd[1]: hermes-dashboard-fwd-alice@269-79-127.0.0.1:22901-127.0.0.1:54400.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 747.778099] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54402). vm-test-run-hermes-remote> server # [ 748.565327] systemd[1]: hermes-dashboard-fwd-alice@270-12353-127.0.0.1:22901-127.0.0.1:54402.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 750.935598] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:54404). vm-test-run-hermes-remote> server # [ 752.205706] systemd[1]: hermes-dashboard-fwd-alice@271-8254-127.0.0.1:22901-127.0.0.1:54404.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 753.618254] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55422). vm-test-run-hermes-remote> server # [ 754.942351] systemd[1]: hermes-dashboard-fwd-alice@272-8255-127.0.0.1:22901-127.0.0.1:55422.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 756.630194] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55432). vm-test-run-hermes-remote> server # [ 757.994382] systemd[1]: hermes-dashboard-fwd-alice@273-4163-127.0.0.1:22901-127.0.0.1:55432.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 759.337280] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55436). vm-test-run-hermes-remote> server # [ 759.974391] systemd[1]: hermes-dashboard-fwd-alice@274-12354-127.0.0.1:22901-127.0.0.1:55436.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 761.069393] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55444). vm-test-run-hermes-remote> server # [ 761.656261] systemd[1]: hermes-dashboard-fwd-alice@275-8256-127.0.0.1:22901-127.0.0.1:55444.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 762.737412] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55450). vm-test-run-hermes-remote> server # [ 763.307135] systemd[1]: hermes-dashboard-fwd-alice@276-8257-127.0.0.1:22901-127.0.0.1:55450.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 764.372390] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:51532). vm-test-run-hermes-remote> server # [ 764.928595] systemd[1]: hermes-dashboard-fwd-alice@277-4164-127.0.0.1:22901-127.0.0.1:51532.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 765.988834] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:51536). vm-test-run-hermes-remote> server # [ 789.532381] systemd[1]: hermes-dashboard-fwd-alice@278-4165-127.0.0.1:22901-127.0.0.1:51536.service: Deactivated successfully. vm-test-run-hermes-remote> client: (finished: waiting for success: /nix/store/54yn2hdk3bnw4yl1xc01qm4y4laaggcr-curl-8.21.0-bin/bin/curl -sf -o /dev/null http://127.0.0.1:23901/api/status, in 683.34 seconds) vm-test-run-hermes-remote> (finished: subtest: the guest dashboard answers /api/status through the tunnel, in 683.34 seconds) vm-test-run-hermes-remote> subtest: the dashboard token gates /api/sessions through the tunnel vm-test-run-hermes-remote> client: must succeed: /nix/store/rgnappqqc5vbq60gza5fflyk84sylwl6-python3-3.14.6/bin/python3 /nix/store/dj21hlrjnv1ky2bcf974w4hg2khbxwlr-hermes-remote-probe.py http://127.0.0.1:23901 53d5157097d33dad6f6556694af72b8422c17e0a366cfad0d9cd0718013a91d1 vm-test-run-hermes-remote> server # [ 789.860333] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58170). vm-test-run-hermes-remote> server # [ 789.957040] systemd[1]: hermes-dashboard-fwd-alice@279-12355-127.0.0.1:22901-127.0.0.1:58170.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 789.960933] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58186). vm-test-run-hermes-remote> server # [ 790.002889] systemd[1]: hermes-dashboard-fwd-alice@280-4166-127.0.0.1:22901-127.0.0.1:58186.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 790.006559] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:58202). vm-test-run-hermes-remote> server # [ 790.041378] systemd[1]: hermes-dashboard-fwd-alice@281-4167-127.0.0.1:22901-127.0.0.1:58202.service: Deactivated successfully. vm-test-run-hermes-remote> client: (finished: must succeed: /nix/store/rgnappqqc5vbq60gza5fflyk84sylwl6-python3-3.14.6/bin/python3 /nix/store/dj21hlrjnv1ky2bcf974w4hg2khbxwlr-hermes-remote-probe.py http://127.0.0.1:23901 53d5157097d33dad6f6556694af72b8422c17e0a366cfad0d9cd0718013a91d1, in 0.50 seconds) vm-test-run-hermes-remote> ok: /api/sessions answers 200 with the token and 401 without it vm-test-run-hermes-remote> (finished: subtest: the dashboard token gates /api/sessions through the tunnel, in 0.50 seconds) vm-test-run-hermes-remote> (finished: run the VM test script, in 794.88 seconds) vm-test-run-hermes-remote> test script finished in 794.93s vm-test-run-hermes-remote> cleanup vm-test-run-hermes-remote> kill QemuMachine (pid 48) vm-test-run-hermes-remote> client # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/rgnappqqc5vbq60gza5fflyk84sylwl6-python3-3.14.6/bin/python3.14) vm-test-run-hermes-remote> kill QemuMachine (pid 47) vm-test-run-hermes-remote> server # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/rgnappqqc5vbq60gza5fflyk84sylwl6-python3-3.14.6/bin/python3.14) vm-test-run-hermes-remote> (finished: cleanup, in 0.50 seconds)