nixbot

1this derivation will be built:2  /nix/store/ccaihmixggfwlmawk35n5100bimxnxl3-vm-test-run-hermes-remote.drv3warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user4building '/nix/store/ccaihmixggfwlmawk35n5100bimxnxl3-vm-test-run-hermes-remote.drv' on nix-store.geninf.io:500515vm-test-run-hermes-remote> gi-build-x86-02: building ccaihmixggfwlmawk35n5100bimxnxl3-vm-test-run-hermes-remote.drv6vm-test-run-hermes-remote> Machine state will be reset. To keep it, pass --keep-machine-state7vm-test-run-hermes-remote> start all VLans8vm-test-run-hermes-remote> (finished: start all VLans, in 0.00 seconds)9vm-test-run-hermes-remote> Test will time out and terminate in 3600.0 seconds10vm-test-run-hermes-remote> run the VM test script11vm-test-run-hermes-remote> additionally exposed symbols:12vm-test-run-hermes-remote>     client, server,13vm-test-run-hermes-remote>     vlan1,14vm-test-run-hermes-remote>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh15vm-test-run-hermes-remote> start all VMs16vm-test-run-hermes-remote> client: starting vm17vm-test-run-hermes-remote> server: starting vm18vm-test-run-hermes-remote> server # Disk image does not exist, creating the virtualisation disk image...19vm-test-run-hermes-remote> server: QEMU running (pid 48)20vm-test-run-hermes-remote> server # Formatting '/build/vm-state-server/tmp.Nt88bBINSc', fmt=raw size=2576980377621vm-test-run-hermes-remote> server # mke2fs 1.47.4 (6-Mar-2025)22vm-test-run-hermes-remote> server # Discarding device blocks:       0/6291456               done23vm-test-run-hermes-remote> server # Creating filesystem with 6291456 4k blocks and 1572864 inodes24vm-test-run-hermes-remote> server # Filesystem UUID: 9222e41e-1ddf-4966-a94e-52574bb11a8425vm-test-run-hermes-remote> server # Superblock backups stored on blocks:26vm-test-run-hermes-remote> server # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,27vm-test-run-hermes-remote> server # 	409600028vm-test-run-hermes-remote> server # 29vm-test-run-hermes-remote> server # Allocating group tables:   0/192       done30vm-test-run-hermes-remote> server # Writing inode tables:   0/192       done31vm-test-run-hermes-remote> server # Creating journal (32768 blocks): done32vm-test-run-hermes-remote> server # Writing superblocks and filesystem accounting information:   0/192       done33vm-test-run-hermes-remote> server # 34vm-test-run-hermes-remote> server # Virtualisation disk image created.35vm-test-run-hermes-remote> server # Starting virtiofs daemons...36vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)37vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether38vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)39vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z INFO  virtiofsd] Waiting for vhost-user socket connection...40vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether41vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z INFO  virtiofsd] Waiting for vhost-user socket connection...42vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)43vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether44vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z INFO  virtiofsd] Waiting for vhost-user socket connection...45vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z INFO  virtiofsd] Client connected, servicing requests46vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z INFO  virtiofsd] Client connected, servicing requests47vm-test-run-hermes-remote> server # [2026-09-25T16:35:57Z INFO  virtiofsd] Client connected, servicing requests48vm-test-run-hermes-remote> client # Disk image does not exist, creating the virtualisation disk image...49vm-test-run-hermes-remote> client # Formatting '/build/vm-state-client/tmp.pfM3kkwycg', fmt=raw size=107374182450vm-test-run-hermes-remote> client # mke2fs 1.47.4 (6-Mar-2025)51vm-test-run-hermes-remote> client # Discarding device blocks:      0/262144             done52vm-test-run-hermes-remote> client # Creating filesystem with 262144 4k blocks and 65536 inodes53vm-test-run-hermes-remote> client # Filesystem UUID: cb5de15d-2526-4cd2-9da6-79ba23a0e9c154vm-test-run-hermes-remote> client # Superblock backups stored on blocks:55vm-test-run-hermes-remote> client # 	32768, 98304, 163840, 22937656vm-test-run-hermes-remote> client # 57vm-test-run-hermes-remote> client # Allocating group tables: 0/8   done58vm-test-run-hermes-remote> client # Writing inode tables: 0/8   done59vm-test-run-hermes-remote> client # Creating journal (8192 blocks): done60vm-test-run-hermes-remote> client # Writing superblocks and filesystem accounting information: 0/8   done61vm-test-run-hermes-remote> client # 62vm-test-run-hermes-remote> client # Virtualisation disk image created.63vm-test-run-hermes-remote> client # Starting virtiofs daemons...64vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)65vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether66vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z INFO  virtiofsd] Waiting for vhost-user socket connection...67vm-test-run-hermes-remote> client: QEMU running (pid 47)68vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)69vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether70vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z INFO  virtiofsd] Waiting for vhost-user socket connection...71vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)72vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether73vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z INFO  virtiofsd] Waiting for vhost-user socket connection...74vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z INFO  virtiofsd] Client connected, servicing requests75vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z INFO  virtiofsd] Client connected, servicing requests76vm-test-run-hermes-remote> client # [2026-09-25T16:35:57Z INFO  virtiofsd] Client connected, servicing requests77vm-test-run-hermes-remote> (finished: start all VMs, in 0.11 seconds)78vm-test-run-hermes-remote> server: waiting for unit multi-user.target79vm-test-run-hermes-remote> server: waiting for the VM to finish booting80vm-test-run-hermes-remote> client # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)81vm-test-run-hermes-remote> server # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)82vm-test-run-hermes-remote> server # 83vm-test-run-hermes-remote> server # 84vm-test-run-hermes-remote> server # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC730+7EF2C730 CA0085vm-test-run-hermes-remote> client # 86vm-test-run-hermes-remote> client # 87vm-test-run-hermes-remote> client # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC730+7EF2C730 CA0088vm-test-run-hermes-remote> server # Press Ctrl-B to configure iPXE (PCI 00:02.0)...89vm-test-run-hermes-remote> server # 90vm-test-run-hermes-remote> server # 91vm-test-run-hermes-remote> server # 92vm-test-run-hermes-remote> server # 93vm-test-run-hermes-remote> server # iPXE (http://ipxe.org) 00:05.0 CB00 PCI2.10 PnP PMM 7EFCC730 7EF2C730 CB0094vm-test-run-hermes-remote> client # Press Ctrl-B to configure iPXE (PCI 00:02.0)...95vm-test-run-hermes-remote> client # 96vm-test-run-hermes-remote> client # 97vm-test-run-hermes-remote> client # 98vm-test-run-hermes-remote> client # 99vm-test-run-hermes-remote> client # iPXE (http://ipxe.org) 00:05.0 CB00 PCI2.10 PnP PMM 7EFCC730 7EF2C730 CB00100vm-test-run-hermes-remote> server # Press Ctrl-B to configure iPXE (PCI 00:05.0)...101vm-test-run-hermes-remote> server # 102vm-test-run-hermes-remote> server # 103vm-test-run-hermes-remote> client # Press Ctrl-B to configure iPXE (PCI 00:05.0)...104vm-test-run-hermes-remote> client # 105vm-test-run-hermes-remote> client # 106vm-test-run-hermes-remote> server # Booting from ROM...107vm-test-run-hermes-remote> client # Booting from ROM...108vm-test-run-hermes-remote> client # Probing EDD (edd=off to disable)... ok[    0.000000] Linux version 6.18.53 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 21 13:06:06 UTC 2026109vm-test-run-hermes-remote> client # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/7pv67q5bm0bn1bnjn20hh25yc175gzqr-nixos-system-client-test/init regInfo=/nix/.ro-store/qxqryg621f1739q7hrnxfxyqwi09p4ba-closure-info/registration console=ttyS0,115200n8 console=tty0110vm-test-run-hermes-remote> client # [    0.000000] BIOS-provided physical RAM map:111vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable112vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved113vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved114vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable115vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved116vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved117vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved118vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved119vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved120vm-test-run-hermes-remote> client # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved121vm-test-run-hermes-remote> client # [    0.000000] NX (Execute Disable) protection: active122vm-test-run-hermes-remote> client # [    0.000000] APIC: Static calls initialized123vm-test-run-hermes-remote> client # [    0.000000] SMBIOS 2.8 present.124vm-test-run-hermes-remote> client # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014125vm-test-run-hermes-remote> client # [    0.000000] DMI: Memory slots populated: 1/1126vm-test-run-hermes-remote> client # [    0.000000] Hypervisor detected: KVM127vm-test-run-hermes-remote> client # [    0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000128vm-test-run-hermes-remote> client # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00129vm-test-run-hermes-remote> client # [    0.000000] kvm-clock: using sched offset of 384846218 cycles130vm-test-run-hermes-remote> client # [    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns131vm-test-run-hermes-remote> client # [    0.000003] tsc: Detected 4192.088 MHz processor132vm-test-run-hermes-remote> client # [    0.000581] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000133vm-test-run-hermes-remote> client # [    0.000608] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs134vm-test-run-hermes-remote> client # [    0.000610] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT135vm-test-run-hermes-remote> client # [    0.002207] found SMP MP-table at [mem 0x000f5450-0x000f545f]136vm-test-run-hermes-remote> client # [    0.002218] Using GB pages for direct mapping137vm-test-run-hermes-remote> client # [    0.002280] RAMDISK: [mem 0x7e365000-0x7ffcffff]138vm-test-run-hermes-remote> client # [    0.002284] ACPI: Early table checksum verification disabled139vm-test-run-hermes-remote> client # [    0.002287] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )140vm-test-run-hermes-remote> client # [    0.002289] ACPI: RSDT 0x000000007FFE247D 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)141vm-test-run-hermes-remote> client # [    0.002293] ACPI: FACP 0x000000007FFE226D 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)142vm-test-run-hermes-remote> client # [    0.002298] ACPI: DSDT 0x000000007FFE0040 00222D (v01 BOCHS  BXPC     00000001 BXPC 00000001)143vm-test-run-hermes-remote> client # [    0.002299] ACPI: FACS 0x000000007FFE0000 000040144vm-test-run-hermes-remote> client # [    0.002300] ACPI: APIC 0x000000007FFE2361 000080 (v03 BOCHS  BXPC     00000001 BXPC 00000001)145vm-test-run-hermes-remote> client # [    0.002301] ACPI: HPET 0x000000007FFE23E1 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)146vm-test-run-hermes-remote> client # [    0.002303] ACPI: MCFG 0x000000007FFE2419 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)147vm-test-run-hermes-remote> client # [    0.002304] ACPI: WAET 0x000000007FFE2455 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)148vm-test-run-hermes-remote> client # [    0.002305] ACPI: Reserving FACP table memory at [mem 0x7ffe226d-0x7ffe2360]149vm-test-run-hermes-remote> client # [    0.002306] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226c]150vm-test-run-hermes-remote> client # [    0.002306] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]151vm-test-run-hermes-remote> client # [    0.002306] ACPI: Reserving APIC table memory at [mem 0x7ffe2361-0x7ffe23e0]152vm-test-run-hermes-remote> client # [    0.002307] ACPI: Reserving HPET table memory at [mem 0x7ffe23e1-0x7ffe2418]153vm-test-run-hermes-remote> client # [    0.002307] ACPI: Reserving MCFG table memory at [mem 0x7ffe2419-0x7ffe2454]154vm-test-run-hermes-remote> client # [    0.002307] ACPI: Reserving WAET table memory at [mem 0x7ffe2455-0x7ffe247c]155vm-test-run-hermes-remote> client # [    0.002645] No NUMA configuration found156vm-test-run-hermes-remote> client # [    0.002646] Faking a node at [mem 0x0000000000000000-0x000000007ffd7fff]157vm-test-run-hermes-remote> client # [    0.002648] NODE_DATA(0) allocated [mem 0x7ffd2780-0x7ffd7cff]158vm-test-run-hermes-remote> client # [    0.002712] Zone ranges:159vm-test-run-hermes-remote> client # [    0.002712]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]160vm-test-run-hermes-remote> client # [    0.002714]   DMA32    [mem 0x0000000001000000-0x000000007ffd7fff]161vm-test-run-hermes-remote> client # [    0.002715]   Normal   empty162vm-test-run-hermes-remote> client # [    0.002715]   Device   empty163vm-test-run-hermes-remote> client # [    0.002716] Movable zone start for each node164vm-test-run-hermes-remote> client # [    0.002716] Early memory node ranges165vm-test-run-hermes-remote> client # [    0.002716]   node   0: [mem 0x0000000000001000-0x000000000009efff]166vm-test-run-hermes-remote> client # [    0.002717]   node   0: [mem 0x0000000000100000-0x000000007ffd7fff]167vm-test-run-hermes-remote> client # [    0.002718] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd7fff]168vm-test-run-hermes-remote> client # [    0.002731] On node 0, zone DMA: 1 pages in unavailable ranges169vm-test-run-hermes-remote> client # [    0.002915] On node 0, zone DMA: 97 pages in unavailable ranges170vm-test-run-hermes-remote> client # [    0.027738] On node 0, zone DMA32: 40 pages in unavailable ranges171vm-test-run-hermes-remote> client # [    0.028517] ACPI: PM-Timer IO Port: 0x608172vm-test-run-hermes-remote> client # [    0.028533] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])173vm-test-run-hermes-remote> client # [    0.028557] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23174vm-test-run-hermes-remote> client # [    0.028558] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)175vm-test-run-hermes-remote> client # [    0.028559] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)176vm-test-run-hermes-remote> client # [    0.028560] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)177vm-test-run-hermes-remote> client # [    0.028561] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)178vm-test-run-hermes-remote> client # [    0.028561] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)179vm-test-run-hermes-remote> client # [    0.028563] ACPI: Using ACPI (MADT) for SMP configuration information180vm-test-run-hermes-remote> client # [    0.028564] ACPI: HPET id: 0x8086a201 base: 0xfed00000181vm-test-run-hermes-remote> client # [    0.028567] TSC deadline timer available182vm-test-run-hermes-remote> client # [    0.028570] CPU topo: Max. logical packages:   1183vm-test-run-hermes-remote> client # [    0.028571] CPU topo: Max. logical dies:       1184vm-test-run-hermes-remote> client # [    0.028571] CPU topo: Max. dies per package:   1185vm-test-run-hermes-remote> client # [    0.028574] CPU topo: Max. threads per core:   1186vm-test-run-hermes-remote> client # [    0.028574] CPU topo: Num. cores per package:     2187vm-test-run-hermes-remote> client # [    0.028574] CPU topo: Num. threads per package:   2188vm-test-run-hermes-remote> client # [    0.028575] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs189vm-test-run-hermes-remote> client # [    0.028590] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()190vm-test-run-hermes-remote> client # [    0.028603] kvm-guest: KVM setup pv remote TLB flush191vm-test-run-hermes-remote> client # [    0.028605] kvm-guest: setup PV sched yield192vm-test-run-hermes-remote> client # [    0.028619] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]193vm-test-run-hermes-remote> client # [    0.028620] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]194vm-test-run-hermes-remote> client # [    0.028621] [mem 0xc0000000-0xfed1bfff] available for PCI devices195vm-test-run-hermes-remote> client # [    0.028622] Booting paravirtualized kernel on KVM196vm-test-run-hermes-remote> client # [    0.028625] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns197vm-test-run-hermes-remote> client # [    0.031816] setup_percpu: NR_CPUS:384 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1198vm-test-run-hermes-remote> client # [    0.033340] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u1048576199vm-test-run-hermes-remote> client # [    0.033378] kvm-guest: PV spinlocks enabled200vm-test-run-hermes-remote> client # [    0.033379] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)201vm-test-run-hermes-remote> client # [    0.033381] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/7pv67q5bm0bn1bnjn20hh25yc175gzqr-nixos-system-client-test/init regInfo=/nix/.ro-store/qxqryg621f1739q7hrnxfxyqwi09p4ba-closure-info/registration console=ttyS0,115200n8 console=tty0202vm-test-run-hermes-remote> client # [    0.033447] Unknown kernel command line parameters "regInfo=/nix/.ro-store/qxqryg621f1739q7hrnxfxyqwi09p4ba-closure-info/registration", will be passed to user space.203vm-test-run-hermes-remote> client # [    0.033646] random: crng init done204vm-test-run-hermes-remote> client # [    0.033647] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes205vm-test-run-hermes-remote> client # [    0.035137] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)206vm-test-run-hermes-remote> client # [    0.035882] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)207vm-test-run-hermes-remote> client # [    0.035917] Fallback order for Node 0: 0208vm-test-run-hermes-remote> client # [    0.035919] Built 1 zonelists, mobility grouping on.  Total pages: 524150209vm-test-run-hermes-remote> client # [    0.035919] Policy zone: DMA32210vm-test-run-hermes-remote> client # [    0.037721] mem auto-init: stack:all(zero), heap alloc:on, heap free:off211vm-test-run-hermes-remote> client # [    0.041147] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1212vm-test-run-hermes-remote> client # [    0.044236] allocated 4194304 bytes of page_ext213vm-test-run-hermes-remote> client # [    0.052752] ftrace: allocating 48798 entries in 192 pages214vm-test-run-hermes-remote> client # [    0.052753] ftrace: allocated 192 pages with 2 groups215vm-test-run-hermes-remote> client # [    0.053389] Dynamic Preempt: lazy216vm-test-run-hermes-remote> client # [    0.053489] rcu: Preemptible hierarchical RCU implementation.217vm-test-run-hermes-remote> client # [    0.053489] rcu: 	RCU event tracing is enabled.218vm-test-run-hermes-remote> client # [    0.053489] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2.219vm-test-run-hermes-remote> client # [    0.053490] 	Trampoline variant of Tasks RCU enabled.220vm-test-run-hermes-remote> client # [    0.053491] 	Rude variant of Tasks RCU enabled.221vm-test-run-hermes-remote> client # [    0.053491] 	Tracing variant of Tasks RCU enabled.222vm-test-run-hermes-remote> client # [    0.053491] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.223vm-test-run-hermes-remote> client # [    0.053492] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2224vm-test-run-hermes-remote> client # [    0.053500] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.225vm-test-run-hermes-remote> client # [    0.053501] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.226vm-test-run-hermes-remote> client # [    0.053502] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.227vm-test-run-hermes-remote> client # [    0.056665] NR_IRQS: 24832, nr_irqs: 440, preallocated irqs: 16228vm-test-run-hermes-remote> client # [    0.056904] rcu: srcu_init: Setting srcu_struct sizes based on contention.229vm-test-run-hermes-remote> client # [    0.056910] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns230vm-test-run-hermes-remote> client # [    0.057057] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)231vm-test-run-hermes-remote> client # [    0.062163] Console: colour VGA+ 80x25232vm-test-run-hermes-remote> client # [    0.062166] printk: legacy console [tty0] enabled233vm-test-run-hermes-remote> client # [    0.092735] printk: legacy console [ttyS0] enabled234vm-test-run-hermes-remote> client # [    0.226835] ACPI: Core revision 20250807235vm-test-run-hermes-remote> client # [    0.227869] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns236vm-test-run-hermes-remote> client # [    0.229775] APIC: Switch to symmetric I/O mode setup237vm-test-run-hermes-remote> client # [    0.230943] x2apic enabled238vm-test-run-hermes-remote> client # [    0.231744] APIC: Switched APIC routing to: physical x2apic239vm-test-run-hermes-remote> client # [    0.232902] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask()240vm-test-run-hermes-remote> client # [    0.234369] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself()241vm-test-run-hermes-remote> client # [    0.236175] kvm-guest: setup PV IPIs242vm-test-run-hermes-remote> client # [    0.237788] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1243vm-test-run-hermes-remote> client # [    0.239013] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns244vm-test-run-hermes-remote> client # [    0.241053] Calibrating delay loop (skipped) preset value.. 8384.17 BogoMIPS (lpj=4192088)245vm-test-run-hermes-remote> client # [    0.243078] x86/cpu: User Mode Instruction Prevention (UMIP) activated246vm-test-run-hermes-remote> server # Probing EDD (edd=off to disable)... o[    0.000000] Linux version 6.18.53 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 21 13:06:06 UTC 2026247vm-test-run-hermes-remote> client # [    0.244156] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127248vm-test-run-hermes-remote> server # [    0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/h9dxvmw5h2r3pwnqbvbaiys9ybc9yvrd-nixos-system-server-test/init regInfo=/nix/.ro-store/f8qqfxw85655qg76g70m2gm1jhc3b2s2-closure-info/registration console=ttyS0,115200n8 console=tty0249vm-test-run-hermes-remote> client # [    0.245053] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0250vm-test-run-hermes-remote> server # [    0.000000] BIOS-provided physical RAM map:251vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable252vm-test-run-hermes-remote> client # [    0.247055] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto253vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved254vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved255vm-test-run-hermes-remote> client # [    0.248053] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl256vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable257vm-test-run-hermes-remote> client # [    0.249053] Spectre V2 : Mitigation: Enhanced / Automatic IBRS258vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved259vm-test-run-hermes-remote> client # [    0.250053] Speculative Return Stack Overflow: Mitigation: Safe RET260vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved261vm-test-run-hermes-remote> client # [    0.251052] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization262vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved263vm-test-run-hermes-remote> client # [    0.253061] Spectre V2 : Enabling IBPB for BPF264vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved265vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved266vm-test-run-hermes-remote> client # [    0.254053] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier267vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable268vm-test-run-hermes-remote> client # [    0.255053] active return thunk: srso_alias_return_thunk269vm-test-run-hermes-remote> server # [    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved270vm-test-run-hermes-remote> client # [    0.256075] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'271vm-test-run-hermes-remote> server # [    0.000000] NX (Execute Disable) protection: active272vm-test-run-hermes-remote> server # [    0.000000] APIC: Static calls initialized273vm-test-run-hermes-remote> client # [    0.257052] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'274vm-test-run-hermes-remote> server # [    0.000000] SMBIOS 2.8 present.275vm-test-run-hermes-remote> client # [    0.259052] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'276vm-test-run-hermes-remote> server # [    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014277vm-test-run-hermes-remote> server # [    0.000000] DMI: Memory slots populated: 1/1278vm-test-run-hermes-remote> client # [    0.260052] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'279vm-test-run-hermes-remote> server # [    0.000000] Hypervisor detected: KVM280vm-test-run-hermes-remote> client # [    0.261052] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'281vm-test-run-hermes-remote> server # [    0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000282vm-test-run-hermes-remote> server # [    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00283vm-test-run-hermes-remote> client # [    0.262052] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'284vm-test-run-hermes-remote> server # [    0.000000] kvm-clock: using sched offset of 384987084 cycles285vm-test-run-hermes-remote> client # [    0.264052] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'286vm-test-run-hermes-remote> server # [    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns287vm-test-run-hermes-remote> server # [    0.000004] tsc: Detected 4192.088 MHz processor288vm-test-run-hermes-remote> client # [    0.265052] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'289vm-test-run-hermes-remote> server # [    0.000576] last_pfn = 0x280000 max_arch_pfn = 0x400000000290vm-test-run-hermes-remote> client # [    0.266052] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'291vm-test-run-hermes-remote> server # [    0.000606] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs292vm-test-run-hermes-remote> client # [    0.267053] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256293vm-test-run-hermes-remote> server # [    0.000609] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT294vm-test-run-hermes-remote> server # [    0.000646] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000295vm-test-run-hermes-remote> client # [    0.269052] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64296vm-test-run-hermes-remote> server # [    0.002203] found SMP MP-table at [mem 0x000f5450-0x000f545f]297vm-test-run-hermes-remote> client # [    0.270052] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512298vm-test-run-hermes-remote> server # [    0.002214] Using GB pages for direct mapping299vm-test-run-hermes-remote> server # [    0.002306] RAMDISK: [mem 0x7e366000-0x7ffcffff]300vm-test-run-hermes-remote> client # [    0.271052] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024301vm-test-run-hermes-remote> server # [    0.002310] ACPI: Early table checksum verification disabled302vm-test-run-hermes-remote> client # [    0.272052] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8303vm-test-run-hermes-remote> server # [    0.002312] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS )304vm-test-run-hermes-remote> client # [    0.274052] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16305vm-test-run-hermes-remote> server # [    0.002315] ACPI: RSDT 0x000000007FFE2539 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)306vm-test-run-hermes-remote> client # [    0.275052] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24307vm-test-run-hermes-remote> server # [    0.002318] ACPI: FACP 0x000000007FFE2319 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)308vm-test-run-hermes-remote> client # [    0.276052] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.309vm-test-run-hermes-remote> server # [    0.002323] ACPI: DSDT 0x000000007FFE0040 0022D9 (v01 BOCHS  BXPC     00000001 BXPC 00000001)310vm-test-run-hermes-remote> server # [    0.002325] ACPI: FACS 0x000000007FFE0000 000040311vm-test-run-hermes-remote> server # [    0.002326] ACPI: APIC 0x000000007FFE240D 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)312vm-test-run-hermes-remote> server # [    0.002327] ACPI: HPET 0x000000007FFE249D 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)313vm-test-run-hermes-remote> server # [    0.002328] ACPI: MCFG 0x000000007FFE24D5 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)314vm-test-run-hermes-remote> server # [    0.002329] ACPI: WAET 0x000000007FFE2511 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)315vm-test-run-hermes-remote> server # [    0.002330] ACPI: Reserving FACP table memory at [mem 0x7ffe2319-0x7ffe240c]316vm-test-run-hermes-remote> server # [    0.002331] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2318]317vm-test-run-hermes-remote> server # [    0.002331] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]318vm-test-run-hermes-remote> server # [    0.002331] ACPI: Reserving APIC table memory at [mem 0x7ffe240d-0x7ffe249c]319vm-test-run-hermes-remote> server # [    0.002332] ACPI: Reserving HPET table memory at [mem 0x7ffe249d-0x7ffe24d4]320vm-test-run-hermes-remote> server # [    0.002332] ACPI: Reserving MCFG table memory at [mem 0x7ffe24d5-0x7ffe2510]321vm-test-run-hermes-remote> server # [    0.002332] ACPI: Reserving WAET table memory at [mem 0x7ffe2511-0x7ffe2538]322vm-test-run-hermes-remote> server # [    0.002669] No NUMA configuration found323vm-test-run-hermes-remote> server # [    0.002671] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]324vm-test-run-hermes-remote> server # [    0.002673] NODE_DATA(0) allocated [mem 0x27fff8780-0x27fffdcff]325vm-test-run-hermes-remote> server # [    0.002746] Zone ranges:326vm-test-run-hermes-remote> server # [    0.002746]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]327vm-test-run-hermes-remote> server # [    0.002747]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]328vm-test-run-hermes-remote> server # [    0.002748]   Normal   [mem 0x0000000100000000-0x000000027fffffff]329vm-test-run-hermes-remote> server # [    0.002749]   Device   empty330vm-test-run-hermes-remote> server # [    0.002749] Movable zone start for each node331vm-test-run-hermes-remote> client # [    0.298430] Freeing SMP alternatives memory: 44K332vm-test-run-hermes-remote> server # [    0.002750] Early memory node ranges333vm-test-run-hermes-remote> client # [    0.299054] pid_max: default: 32768 minimum: 301334vm-test-run-hermes-remote> server # [    0.002750]   node   0: [mem 0x0000000000001000-0x000000000009efff]335vm-test-run-hermes-remote> client # [    0.300101] LSM: initializing lsm=capability,landlock,yama,bpf,ima336vm-test-run-hermes-remote> server # [    0.002751]   node   0: [mem 0x0000000000100000-0x000000007ffd7fff]337vm-test-run-hermes-remote> client # [    0.301131] landlock: Up and running.338vm-test-run-hermes-remote> server # [    0.002751]   node   0: [mem 0x0000000100000000-0x000000027fffffff]339vm-test-run-hermes-remote> client # [    0.302053] Yama: becoming mindful.340vm-test-run-hermes-remote> server # [    0.002752] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]341vm-test-run-hermes-remote> client # [    0.303216] LSM support for eBPF active342vm-test-run-hermes-remote> server # [    0.002765] On node 0, zone DMA: 1 pages in unavailable ranges343vm-test-run-hermes-remote> server # [    0.002949] On node 0, zone DMA: 97 pages in unavailable ranges344vm-test-run-hermes-remote> client # [    0.304121] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)345vm-test-run-hermes-remote> server # [    0.102626] On node 0, zone Normal: 40 pages in unavailable ranges346vm-test-run-hermes-remote> server # [    0.103412] ACPI: PM-Timer IO Port: 0x608347vm-test-run-hermes-remote> client # [    0.305087] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)348vm-test-run-hermes-remote> server # [    0.103425] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])349vm-test-run-hermes-remote> server # [    0.103447] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23350vm-test-run-hermes-remote> client # [    0.308287] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)351vm-test-run-hermes-remote> server # [    0.103449] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)352vm-test-run-hermes-remote> server # [    0.103450] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)353vm-test-run-hermes-remote> client # [    0.309449] Performance Events: Fam17h+ core perfctr, AMD PMU driver.354vm-test-run-hermes-remote> server # [    0.103451] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)355vm-test-run-hermes-remote> client # [    0.310060] ... version:                   2356vm-test-run-hermes-remote> server # [    0.103452] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)357vm-test-run-hermes-remote> client # [    0.310941] ... bit width:                 48358vm-test-run-hermes-remote> client # [    0.311752] ... generic counters:          6359vm-test-run-hermes-remote> server # [    0.103452] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)360vm-test-run-hermes-remote> client # [    0.312058] ... generic bitmap:            000000000000003f361vm-test-run-hermes-remote> server # [    0.103454] ACPI: Using ACPI (MADT) for SMP configuration information362vm-test-run-hermes-remote> server # [    0.103455] ACPI: HPET id: 0x8086a201 base: 0xfed00000363vm-test-run-hermes-remote> client # [    0.313058] ... fixed-purpose counters:    0364vm-test-run-hermes-remote> server # [    0.103460] TSC deadline timer available365vm-test-run-hermes-remote> client # [    0.313942] ... fixed-purpose bitmap:      0000000000000000366vm-test-run-hermes-remote> server # [    0.103464] CPU topo: Max. logical packages:   1367vm-test-run-hermes-remote> server # [    0.103464] CPU topo: Max. logical dies:       1368vm-test-run-hermes-remote> client # [    0.314945] ... value mask:                0000ffffffffffff369vm-test-run-hermes-remote> server # [    0.103465] CPU topo: Max. dies per package:   1370vm-test-run-hermes-remote> client # [    0.315951] ... max period:                00007fffffffffff371vm-test-run-hermes-remote> server # [    0.103467] CPU topo: Max. threads per core:   1372vm-test-run-hermes-remote> server # [    0.103468] CPU topo: Num. cores per package:     4373vm-test-run-hermes-remote> client # [    0.316954] ... global_ctrl mask:          000000000000003f374vm-test-run-hermes-remote> server # [    0.103468] CPU topo: Num. threads per package:   4375vm-test-run-hermes-remote> client # [    0.318014] signal: max sigframe size: 3376376vm-test-run-hermes-remote> server # [    0.103468] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs377vm-test-run-hermes-remote> client # [    0.318792] rcu: Hierarchical SRCU implementation.378vm-test-run-hermes-remote> server # [    0.103487] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()379vm-test-run-hermes-remote> client # [    0.319057] rcu: 	Max phase no-delay instances is 400.380vm-test-run-hermes-remote> server # [    0.103499] kvm-guest: KVM setup pv remote TLB flush381vm-test-run-hermes-remote> server # [    0.103501] kvm-guest: setup PV sched yield382vm-test-run-hermes-remote> client # [    0.320208] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level383vm-test-run-hermes-remote> server # [    0.103516] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]384vm-test-run-hermes-remote> server # [    0.103517] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]385vm-test-run-hermes-remote> server # [    0.103518] PM: hibernation: Registered nosave memory: [mem 0x7ffd8000-0xffffffff]386vm-test-run-hermes-remote> client # [    0.323864] smp: Bringing up secondary CPUs ...387vm-test-run-hermes-remote> server # [    0.103519] [mem 0xc0000000-0xfed1bfff] available for PCI devices388vm-test-run-hermes-remote> server # [    0.103520] Booting paravirtualized kernel on KVM389vm-test-run-hermes-remote> client # [    0.325035] smpboot: x86: Booting SMP configuration:390vm-test-run-hermes-remote> client # [    0.325850] .... node  #0, CPUs:      #1391vm-test-run-hermes-remote> server # [    0.103523] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns392vm-test-run-hermes-remote> client # [    0.326098] smp: Brought up 1 node, 2 CPUs393vm-test-run-hermes-remote> server # [    0.106801] setup_percpu: NR_CPUS:384 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1394vm-test-run-hermes-remote> client # [    0.327910] smpboot: Total of 2 processors activated (16768.35 BogoMIPS)395vm-test-run-hermes-remote> server # [    0.108483] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u524288396vm-test-run-hermes-remote> server # [    0.108519] kvm-guest: PV spinlocks enabled397vm-test-run-hermes-remote> server # [    0.108521] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)398vm-test-run-hermes-remote> client # [    0.329260] Memory: 1969840K/2096600K available (17259K kernel code, 2728K rwdata, 13652K rodata, 3656K init, 2968K bss, 115932K reserved, 0K cma-reserved)399vm-test-run-hermes-remote> client # [    0.330339] devtmpfs: initialized400vm-test-run-hermes-remote> client # [    0.331219] x86/mm: Memory block size: 128MB401vm-test-run-hermes-remote> server # [    0.108523] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/h9dxvmw5h2r3pwnqbvbaiys9ybc9yvrd-nixos-system-server-test/init regInfo=/nix/.ro-store/f8qqfxw85655qg76g70m2gm1jhc3b2s2-closure-info/registration console=ttyS0,115200n8 console=tty0402vm-test-run-hermes-remote> client # [    0.332707] posixtimers hash table entries: 1024 (order: 2, 16384 bytes, linear)403vm-test-run-hermes-remote> client # [    0.334090] futex hash table entries: 512 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear).404vm-test-run-hermes-remote> server # [    0.108593] Unknown kernel command line parameters "regInfo=/nix/.ro-store/f8qqfxw85655qg76g70m2gm1jhc3b2s2-closure-info/registration", will be passed to user space.405vm-test-run-hermes-remote> server # [    0.108784] random: crng init done406vm-test-run-hermes-remote> client # [    0.335121] pinctrl core: initialized pinctrl subsystem407vm-test-run-hermes-remote> server # [    0.108785] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes408vm-test-run-hermes-remote> client # [    0.336297] PM: RTC time: 16:35:57, date: 2026-09-25409vm-test-run-hermes-remote> server # [    0.114877] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)410vm-test-run-hermes-remote> server # [    0.117880] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)411vm-test-run-hermes-remote> server # [    0.117932] software IO TLB: area num 4.412vm-test-run-hermes-remote> client # [    0.338942] NET: Registered PF_NETLINK/PF_ROUTE protocol family413vm-test-run-hermes-remote> server # [    0.170041] Fallback order for Node 0: 0414vm-test-run-hermes-remote> server # [    0.170048] Built 1 zonelists, mobility grouping on.  Total pages: 2097014415vm-test-run-hermes-remote> client # [    0.340380] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations416vm-test-run-hermes-remote> server # [    0.170049] Policy zone: Normal417vm-test-run-hermes-remote> server # [    0.171869] mem auto-init: stack:all(zero), heap alloc:on, heap free:off418vm-test-run-hermes-remote> client # [    0.341077] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations419vm-test-run-hermes-remote> server # [    0.182473] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1420vm-test-run-hermes-remote> server # [    0.194837] allocated 16777216 bytes of page_ext421vm-test-run-hermes-remote> client # [    0.342250] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations422vm-test-run-hermes-remote> server # [    0.203231] ftrace: allocating 48798 entries in 192 pages423vm-test-run-hermes-remote> client # [    0.343061] audit: initializing netlink subsys (disabled)424vm-test-run-hermes-remote> server # [    0.203233] ftrace: allocated 192 pages with 2 groups425vm-test-run-hermes-remote> server # [    0.203871] Dynamic Preempt: lazy426vm-test-run-hermes-remote> client # [    0.344118] audit: type=2000 audit(1790354157.888:1): state=initialized audit_enabled=0 res=1427vm-test-run-hermes-remote> server # [    0.204016] rcu: Preemptible hierarchical RCU implementation.428vm-test-run-hermes-remote> server # [    0.204016] rcu: 	RCU event tracing is enabled.429vm-test-run-hermes-remote> client # [    0.344220] thermal_sys: Registered thermal governor 'fair_share'430vm-test-run-hermes-remote> server # [    0.204016] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=4.431vm-test-run-hermes-remote> client # [    0.345059] thermal_sys: Registered thermal governor 'bang_bang'432vm-test-run-hermes-remote> server # [    0.204017] 	Trampoline variant of Tasks RCU enabled.433vm-test-run-hermes-remote> server # [    0.204018] 	Rude variant of Tasks RCU enabled.434vm-test-run-hermes-remote> client # [    0.346059] thermal_sys: Registered thermal governor 'step_wise'435vm-test-run-hermes-remote> server # [    0.204018] 	Tracing variant of Tasks RCU enabled.436vm-test-run-hermes-remote> client # [    0.347060] thermal_sys: Registered thermal governor 'user_space'437vm-test-run-hermes-remote> server # [    0.204018] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.438vm-test-run-hermes-remote> client # [    0.348054] thermal_sys: Registered thermal governor 'power_allocator'439vm-test-run-hermes-remote> server # [    0.204019] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4440vm-test-run-hermes-remote> client # [    0.349077] cpuidle: using governor menu441vm-test-run-hermes-remote> server # [    0.204035] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.442vm-test-run-hermes-remote> client # [    0.351596] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5443vm-test-run-hermes-remote> server # [    0.204037] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.444vm-test-run-hermes-remote> server # [    0.204037] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.445vm-test-run-hermes-remote> client # [    0.352261] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]446vm-test-run-hermes-remote> server # [    0.207199] NR_IRQS: 24832, nr_irqs: 456, preallocated irqs: 16447vm-test-run-hermes-remote> client # [    0.353060] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry448vm-test-run-hermes-remote> server # [    0.207460] rcu: srcu_init: Setting srcu_struct sizes based on contention.449vm-test-run-hermes-remote> client # [    0.354060] PCI: Using configuration type 1 for base access450vm-test-run-hermes-remote> server # [    0.207466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns451vm-test-run-hermes-remote> client # [    0.355214] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.452vm-test-run-hermes-remote> server # [    0.207629] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)453vm-test-run-hermes-remote> server # [    0.212768] Console: colour VGA+ 80x25454vm-test-run-hermes-remote> server # [    0.212771] printk: legacy console [tty0] enabled455vm-test-run-hermes-remote> server # [    0.244735] printk: legacy console [ttyS0] enabled456vm-test-run-hermes-remote> server # [    0.384986] ACPI: Core revision 20250807457vm-test-run-hermes-remote> server # [    0.385998] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns458vm-test-run-hermes-remote> server # [    0.387916] APIC: Switch to symmetric I/O mode setup459vm-test-run-hermes-remote> server # [    0.389117] x2apic enabled460vm-test-run-hermes-remote> server # [    0.389946] APIC: Switched APIC routing to: physical x2apic461vm-test-run-hermes-remote> client # [    0.365068] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages462vm-test-run-hermes-remote> server # [    0.391134] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask()463vm-test-run-hermes-remote> client # [    0.366054] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page464vm-test-run-hermes-remote> server # [    0.392647] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself()465vm-test-run-hermes-remote> client # [    0.367055] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages466vm-test-run-hermes-remote> server # [    0.394497] kvm-guest: setup PV IPIs467vm-test-run-hermes-remote> client # [    0.368059] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page468vm-test-run-hermes-remote> server # [    0.396105] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1469vm-test-run-hermes-remote> client # [    0.370816] ACPI: Added _OSI(Module Device)470vm-test-run-hermes-remote> client # [    0.371055] ACPI: Added _OSI(Processor Device)471vm-test-run-hermes-remote> client # [    0.371995] ACPI: Added _OSI(Processor Aggregator Device)472vm-test-run-hermes-remote> server # [    0.397352] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns473vm-test-run-hermes-remote> client # [    0.374829] ACPI: 1 ACPI AML tables successfully acquired and loaded474vm-test-run-hermes-remote> server # [    0.403159] Calibrating delay loop (skipped) preset value.. 8384.17 BogoMIPS (lpj=4192088)475vm-test-run-hermes-remote> client # [    0.375552] ACPI: Interpreter enabled476vm-test-run-hermes-remote> server # [    0.405194] x86/cpu: User Mode Instruction Prevention (UMIP) activated477vm-test-run-hermes-remote> client # [    0.376675] ACPI: PM: (supports S0 S3 S4 S5)478vm-test-run-hermes-remote> server # [    0.406265] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127479vm-test-run-hermes-remote> client # [    0.377055] ACPI: Using IOAPIC for interrupt routing480vm-test-run-hermes-remote> server # [    0.407166] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0481vm-test-run-hermes-remote> client # [    0.378130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug482vm-test-run-hermes-remote> server # [    0.408162] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto483vm-test-run-hermes-remote> client # [    0.379055] PCI: Using E820 reservations for host bridge windows484vm-test-run-hermes-remote> client # [    0.380171] ACPI: Enabled 2 GPEs in block 00 to 3F485vm-test-run-hermes-remote> server # [    0.410159] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl486vm-test-run-hermes-remote> server # [    0.411159] Spectre V2 : Mitigation: Enhanced / Automatic IBRS487vm-test-run-hermes-remote> server # [    0.413159] Speculative Return Stack Overflow: Mitigation: Safe RET488vm-test-run-hermes-remote> client # [    0.384363] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])489vm-test-run-hermes-remote> server # [    0.414159] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization490vm-test-run-hermes-remote> server # [    0.415164] Spectre V2 : Enabling IBPB for BPF491vm-test-run-hermes-remote> client # [    0.385058] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]492vm-test-run-hermes-remote> server # [    0.416095] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier493vm-test-run-hermes-remote> client # [    0.386115] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]494vm-test-run-hermes-remote> server # [    0.417159] active return thunk: srso_alias_return_thunk495vm-test-run-hermes-remote> client # [    0.387151] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]496vm-test-run-hermes-remote> server # [    0.418180] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'497vm-test-run-hermes-remote> client # [    0.388463] PCI host bridge to bus 0000:00498vm-test-run-hermes-remote> server # [    0.420159] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'499vm-test-run-hermes-remote> client # [    0.389059] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]500vm-test-run-hermes-remote> server # [    0.421159] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'501vm-test-run-hermes-remote> client # [    0.390055] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]502vm-test-run-hermes-remote> server # [    0.422159] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'503vm-test-run-hermes-remote> client # [    0.391055] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]504vm-test-run-hermes-remote> server # [    0.424159] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'505vm-test-run-hermes-remote> client # [    0.392055] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]506vm-test-run-hermes-remote> server # [    0.425159] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'507vm-test-run-hermes-remote> client # [    0.393055] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]508vm-test-run-hermes-remote> server # [    0.426159] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'509vm-test-run-hermes-remote> client # [    0.394055] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]510vm-test-run-hermes-remote> server # [    0.427159] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'511vm-test-run-hermes-remote> client # [    0.395055] pci_bus 0000:00: root bus resource [bus 00-ff]512vm-test-run-hermes-remote> server # [    0.428159] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'513vm-test-run-hermes-remote> client # [    0.396169] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint514vm-test-run-hermes-remote> server # [    0.430159] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256515vm-test-run-hermes-remote> server # [    0.431159] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64516vm-test-run-hermes-remote> client # [    0.397695] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint517vm-test-run-hermes-remote> server # [    0.432159] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512518vm-test-run-hermes-remote> server # [    0.434159] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024519vm-test-run-hermes-remote> server # [    0.435159] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8520vm-test-run-hermes-remote> server # [    0.436159] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]:   16521vm-test-run-hermes-remote> client # [    0.400001] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]522vm-test-run-hermes-remote> server # [    0.437159] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]:   24523vm-test-run-hermes-remote> client # [    0.401101] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]524vm-test-run-hermes-remote> server # [    0.439159] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.525vm-test-run-hermes-remote> client # [    0.402092] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]526vm-test-run-hermes-remote> client # [    0.403210] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]527vm-test-run-hermes-remote> client # [    0.404770] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint528vm-test-run-hermes-remote> client # [    0.407072] pci 0000:00:02.0: BAR 0 [io  0xc100-0xc11f]529vm-test-run-hermes-remote> client # [    0.408069] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]530vm-test-run-hermes-remote> client # [    0.409096] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]531vm-test-run-hermes-remote> client # [    0.410073] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]532vm-test-run-hermes-remote> client # [    0.411904] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint533vm-test-run-hermes-remote> client # [    0.414064] pci 0000:00:03.0: BAR 0 [io  0xc120-0xc13f]534vm-test-run-hermes-remote> client # [    0.415069] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]535vm-test-run-hermes-remote> client # [    0.416096] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]536vm-test-run-hermes-remote> client # [    0.418082] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint537vm-test-run-hermes-remote> server # [    0.462461] Freeing SMP alternatives memory: 44K538vm-test-run-hermes-remote> server # [    0.463161] pid_max: default: 32768 minimum: 301539vm-test-run-hermes-remote> server # [    0.464207] LSM: initializing lsm=capability,landlock,yama,bpf,ima540vm-test-run-hermes-remote> client # [    0.420997] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]541vm-test-run-hermes-remote> server # [    0.465248] landlock: Up and running.542vm-test-run-hermes-remote> client # [    0.422064] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]543vm-test-run-hermes-remote> server # [    0.466159] Yama: becoming mindful.544vm-test-run-hermes-remote> client # [    0.423095] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]545vm-test-run-hermes-remote> server # [    0.467330] LSM support for eBPF active546vm-test-run-hermes-remote> server # [    0.468325] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)547vm-test-run-hermes-remote> client # [    0.424919] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint548vm-test-run-hermes-remote> server # [    0.469260] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)549vm-test-run-hermes-remote> client # [    0.427071] pci 0000:00:05.0: BAR 0 [io  0xc140-0xc15f]550vm-test-run-hermes-remote> client # [    0.428068] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]551vm-test-run-hermes-remote> server # [    0.472416] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2)552vm-test-run-hermes-remote> client # [    0.429108] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]553vm-test-run-hermes-remote> server # [    0.473575] Performance Events: Fam17h+ core perfctr, AMD PMU driver.554vm-test-run-hermes-remote> server # [    0.474166] ... version:                   2555vm-test-run-hermes-remote> client # [    0.430068] pci 0000:00:05.0: ROM [mem 0xfeb80000-0xfebbffff pref]556vm-test-run-hermes-remote> server # [    0.475039] ... bit width:                 48557vm-test-run-hermes-remote> server # [    0.475859] ... generic counters:          6558vm-test-run-hermes-remote> client # [    0.431920] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint559vm-test-run-hermes-remote> server # [    0.476160] ... generic bitmap:            000000000000003f560vm-test-run-hermes-remote> server # [    0.477160] ... fixed-purpose counters:    0561vm-test-run-hermes-remote> client # [    0.433886] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]562vm-test-run-hermes-remote> server # [    0.478042] ... fixed-purpose bitmap:      0000000000000000563vm-test-run-hermes-remote> server # [    0.479040] ... value mask:                0000ffffffffffff564vm-test-run-hermes-remote> client # [    0.435053] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]565vm-test-run-hermes-remote> server # [    0.480051] ... max period:                00007fffffffffff566vm-test-run-hermes-remote> server # [    0.481049] ... global_ctrl mask:          000000000000003f567vm-test-run-hermes-remote> client # [    0.436905] pci 0000:00:07.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint568vm-test-run-hermes-remote> server # [    0.482115] signal: max sigframe size: 3376569vm-test-run-hermes-remote> server # [    0.482881] rcu: Hierarchical SRCU implementation.570vm-test-run-hermes-remote> client # [    0.439064] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]571vm-test-run-hermes-remote> server # [    0.483163] rcu: 	Max phase no-delay instances is 400.572vm-test-run-hermes-remote> client # [    0.440092] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]573vm-test-run-hermes-remote> server # [    0.484287] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level574vm-test-run-hermes-remote> client # [    0.441944] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint575vm-test-run-hermes-remote> client # [    0.443923] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]576vm-test-run-hermes-remote> server # [    0.488073] smp: Bringing up secondary CPUs ...577vm-test-run-hermes-remote> client # [    0.445039] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]578vm-test-run-hermes-remote> server # [    0.489162] smpboot: x86: Booting SMP configuration:579vm-test-run-hermes-remote> client # [    0.446905] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint580vm-test-run-hermes-remote> server # [    0.490154] .... node  #0, CPUs:      #1 #2 #3581vm-test-run-hermes-remote> server # [    0.491206] smp: Brought up 1 node, 4 CPUs582vm-test-run-hermes-remote> client # [    0.448926] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]583vm-test-run-hermes-remote> server # [    0.493162] smpboot: Total of 4 processors activated (33536.70 BogoMIPS)584vm-test-run-hermes-remote> client # [    0.450054] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]585vm-test-run-hermes-remote> server # [    0.494321] Memory: 8074020K/8388056K available (17259K kernel code, 2728K rwdata, 13652K rodata, 3656K init, 2968K bss, 290564K reserved, 0K cma-reserved)586vm-test-run-hermes-remote> server # [    0.495432] devtmpfs: initialized587vm-test-run-hermes-remote> server # [    0.496315] x86/mm: Memory block size: 128MB588vm-test-run-hermes-remote> server # [    0.499192] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)589vm-test-run-hermes-remote> server # [    0.500218] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).590vm-test-run-hermes-remote> client # [    0.451944] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint591vm-test-run-hermes-remote> server # [    0.501235] pinctrl core: initialized pinctrl subsystem592vm-test-run-hermes-remote> server # [    0.502405] PM: RTC time: 16:35:57, date: 2026-09-25593vm-test-run-hermes-remote> client # [    0.454071] pci 0000:00:0a.0: BAR 0 [io  0xc080-0xc0bf]594vm-test-run-hermes-remote> client # [    0.455069] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]595vm-test-run-hermes-remote> server # [    0.505166] NET: Registered PF_NETLINK/PF_ROUTE protocol family596vm-test-run-hermes-remote> client # [    0.456096] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]597vm-test-run-hermes-remote> server # [    0.507049] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations598vm-test-run-hermes-remote> client # [    0.458045] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint599vm-test-run-hermes-remote> server # [    0.508202] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations600vm-test-run-hermes-remote> client # [    0.460049] pci 0000:00:0b.0: BAR 0 [io  0xc160-0xc17f]601vm-test-run-hermes-remote> client # [    0.461069] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]602vm-test-run-hermes-remote> server # [    0.509902] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations603vm-test-run-hermes-remote> server # [    0.511168] audit: initializing netlink subsys (disabled)604vm-test-run-hermes-remote> client # [    0.462102] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]605vm-test-run-hermes-remote> server # [    0.512213] audit: type=2000 audit(1790354158.045:1): state=initialized audit_enabled=0 res=1606vm-test-run-hermes-remote> client # [    0.463929] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint607vm-test-run-hermes-remote> server # [    0.512369] thermal_sys: Registered thermal governor 'fair_share'608vm-test-run-hermes-remote> server # [    0.513161] thermal_sys: Registered thermal governor 'bang_bang'609vm-test-run-hermes-remote> client # [    0.465870] pci 0000:00:1d.0: BAR 4 [io  0xc180-0xc19f]610vm-test-run-hermes-remote> server # [    0.514160] thermal_sys: Registered thermal governor 'step_wise'611vm-test-run-hermes-remote> client # [    0.467165] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint612vm-test-run-hermes-remote> server # [    0.515161] thermal_sys: Registered thermal governor 'user_space'613vm-test-run-hermes-remote> server # [    0.516160] thermal_sys: Registered thermal governor 'power_allocator'614vm-test-run-hermes-remote> client # [    0.468663] pci 0000:00:1d.1: BAR 4 [io  0xc1a0-0xc1bf]615vm-test-run-hermes-remote> server # [    0.517171] cpuidle: using governor menu616vm-test-run-hermes-remote> client # [    0.469312] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint617vm-test-run-hermes-remote> server # [    0.519689] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5618vm-test-run-hermes-remote> client # [    0.470680] pci 0000:00:1d.2: BAR 4 [io  0xc1c0-0xc1df]619vm-test-run-hermes-remote> server # [    0.520390] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]620vm-test-run-hermes-remote> client # [    0.471345] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint621vm-test-run-hermes-remote> server # [    0.521162] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry622vm-test-run-hermes-remote> server # [    0.522169] PCI: Using configuration type 1 for base access623vm-test-run-hermes-remote> client # [    0.472789] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff]624vm-test-run-hermes-remote> server # [    0.523290] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.625vm-test-run-hermes-remote> client # [    0.473397] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint626vm-test-run-hermes-remote> server # [    0.524437] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages627vm-test-run-hermes-remote> client # [    0.474522] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO628vm-test-run-hermes-remote> server # [    0.525161] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page629vm-test-run-hermes-remote> client # [    0.475387] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint630vm-test-run-hermes-remote> server # [    0.526161] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages631vm-test-run-hermes-remote> server # [    0.527160] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page632vm-test-run-hermes-remote> client # [    0.476895] pci 0000:00:1f.2: BAR 4 [io  0xc1e0-0xc1ff]633vm-test-run-hermes-remote> client # [    0.477907] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff]634vm-test-run-hermes-remote> server # [    0.529284] ACPI: Added _OSI(Module Device)635vm-test-run-hermes-remote> server # [    0.530162] ACPI: Added _OSI(Processor Device)636vm-test-run-hermes-remote> client # [    0.479540] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint637vm-test-run-hermes-remote> server # [    0.531105] ACPI: Added _OSI(Processor Aggregator Device)638vm-test-run-hermes-remote> client # [    0.480666] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]639vm-test-run-hermes-remote> server # [    0.533985] ACPI: 1 ACPI AML tables successfully acquired and loaded640vm-test-run-hermes-remote> client # [    0.485601] ACPI: PCI: Interrupt link LNKA configured for IRQ 10641vm-test-run-hermes-remote> server # [    0.538364] ACPI: Interpreter enabled642vm-test-run-hermes-remote> server # [    0.539240] ACPI: PM: (supports S0 S3 S4 S5)643vm-test-run-hermes-remote> client # [    0.486190] ACPI: PCI: Interrupt link LNKB configured for IRQ 10644vm-test-run-hermes-remote> server # [    0.540161] ACPI: Using IOAPIC for interrupt routing645vm-test-run-hermes-remote> client # [    0.487177] ACPI: PCI: Interrupt link LNKC configured for IRQ 11646vm-test-run-hermes-remote> client # [    0.488186] ACPI: PCI: Interrupt link LNKD configured for IRQ 11647vm-test-run-hermes-remote> server # [    0.541317] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug648vm-test-run-hermes-remote> client # [    0.489175] ACPI: PCI: Interrupt link LNKE configured for IRQ 10649vm-test-run-hermes-remote> server # [    0.542162] PCI: Using E820 reservations for host bridge windows650vm-test-run-hermes-remote> server # [    0.544394] ACPI: Enabled 2 GPEs in block 00 to 3F651vm-test-run-hermes-remote> client # [    0.490173] ACPI: PCI: Interrupt link LNKF configured for IRQ 10652vm-test-run-hermes-remote> client # [    0.491167] ACPI: PCI: Interrupt link LNKG configured for IRQ 11653vm-test-run-hermes-remote> client # [    0.492167] ACPI: PCI: Interrupt link LNKH configured for IRQ 11654vm-test-run-hermes-remote> client # [    0.493097] ACPI: PCI: Interrupt link GSIA configured for IRQ 16655vm-test-run-hermes-remote> server # [    0.548911] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])656vm-test-run-hermes-remote> client # [    0.494074] ACPI: PCI: Interrupt link GSIB configured for IRQ 17657vm-test-run-hermes-remote> client # [    0.495067] ACPI: PCI: Interrupt link GSIC configured for IRQ 18658vm-test-run-hermes-remote> server # [    0.550166] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]659vm-test-run-hermes-remote> client # [    0.496071] ACPI: PCI: Interrupt link GSID configured for IRQ 19660vm-test-run-hermes-remote> server # [    0.552288] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]661vm-test-run-hermes-remote> client # [    0.497071] ACPI: PCI: Interrupt link GSIE configured for IRQ 20662vm-test-run-hermes-remote> server # [    0.553273] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]663vm-test-run-hermes-remote> client # [    0.498066] ACPI: PCI: Interrupt link GSIF configured for IRQ 21664vm-test-run-hermes-remote> server # [    0.555614] PCI host bridge to bus 0000:00665vm-test-run-hermes-remote> client # [    0.499075] ACPI: PCI: Interrupt link GSIG configured for IRQ 22666vm-test-run-hermes-remote> client # [    0.500066] ACPI: PCI: Interrupt link GSIH configured for IRQ 23667vm-test-run-hermes-remote> server # [    0.556174] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]668vm-test-run-hermes-remote> server # [    0.557161] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]669vm-test-run-hermes-remote> client # [    0.501746] iommu: Default domain type: Translated670vm-test-run-hermes-remote> server # [    0.559161] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]671vm-test-run-hermes-remote> client # [    0.502890] iommu: DMA domain TLB invalidation policy: lazy mode672vm-test-run-hermes-remote> server # [    0.560161] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]673vm-test-run-hermes-remote> client # [    0.504391] ACPI: bus type USB registered674vm-test-run-hermes-remote> client # [    0.505203] usbcore: registered new interface driver usbfs675vm-test-run-hermes-remote> server # [    0.562161] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]676vm-test-run-hermes-remote> client # [    0.506094] usbcore: registered new interface driver hub677vm-test-run-hermes-remote> server # [    0.563161] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window]678vm-test-run-hermes-remote> client # [    0.507075] usbcore: registered new device driver usb679vm-test-run-hermes-remote> server # [    0.565162] pci_bus 0000:00: root bus resource [bus 00-ff]680vm-test-run-hermes-remote> client # [    0.509580] NetLabel: Initializing681vm-test-run-hermes-remote> server # [    0.566335] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint682vm-test-run-hermes-remote> client # [    0.510059] NetLabel:  domain hash size = 128683vm-test-run-hermes-remote> client # [    0.510960] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO684vm-test-run-hermes-remote> server # [    0.568832] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint685vm-test-run-hermes-remote> client # [    0.512001] NetLabel:  unlabeled traffic allowed by default686vm-test-run-hermes-remote> client # [    0.512966] PCI: Using ACPI for IRQ routing687vm-test-run-hermes-remote> server # [    0.575200] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]688vm-test-run-hermes-remote> server # [    0.576180] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]689vm-test-run-hermes-remote> server # [    0.578199] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]690vm-test-run-hermes-remote> server # [    0.579437] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]691vm-test-run-hermes-remote> server # [    0.581880] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint692vm-test-run-hermes-remote> server # [    0.585171] pci 0000:00:02.0: BAR 0 [io  0xc100-0xc11f]693vm-test-run-hermes-remote> server # [    0.586171] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]694vm-test-run-hermes-remote> server # [    0.588199] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref]695vm-test-run-hermes-remote> server # [    0.589171] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]696vm-test-run-hermes-remote> server # [    0.592016] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint697vm-test-run-hermes-remote> server # [    0.595171] pci 0000:00:03.0: BAR 0 [io  0xc120-0xc13f]698vm-test-run-hermes-remote> server # [    0.596170] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]699vm-test-run-hermes-remote> server # [    0.597198] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref]700vm-test-run-hermes-remote> server # [    0.599018] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint701vm-test-run-hermes-remote> server # [    0.603171] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]702vm-test-run-hermes-remote> server # [    0.604177] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]703vm-test-run-hermes-remote> server # [    0.605205] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref]704vm-test-run-hermes-remote> server # [    0.607315] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint705vm-test-run-hermes-remote> server # [    0.612615] pci 0000:00:05.0: BAR 0 [io  0xc140-0xc15f]706vm-test-run-hermes-remote> server # [    0.613171] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]707vm-test-run-hermes-remote> server # [    0.614198] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref]708vm-test-run-hermes-remote> server # [    0.616171] pci 0000:00:05.0: ROM [mem 0xfeb80000-0xfebbffff pref]709vm-test-run-hermes-remote> server # [    0.618008] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint710vm-test-run-hermes-remote> server # [    0.621180] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]711vm-test-run-hermes-remote> server # [    0.622198] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref]712vm-test-run-hermes-remote> server # [    0.624008] pci 0000:00:07.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint713vm-test-run-hermes-remote> server # [    0.627180] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]714vm-test-run-hermes-remote> server # [    0.636149] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref]715vm-test-run-hermes-remote> server # [    0.638002] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint716vm-test-run-hermes-remote> server # [    0.641180] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]717vm-test-run-hermes-remote> server # [    0.642198] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref]718vm-test-run-hermes-remote> server # [    0.645011] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint719vm-test-run-hermes-remote> client # [    0.589081] pci 0000:00:01.0: vgaarb: setting as boot VGA device720vm-test-run-hermes-remote> server # [    0.647161] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]721vm-test-run-hermes-remote> client # [    0.590050] pci 0000:00:01.0: vgaarb: bridge control possible722vm-test-run-hermes-remote> server # [    0.648201] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref]723vm-test-run-hermes-remote> client # [    0.590050] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none724vm-test-run-hermes-remote> client # [    0.590057] vgaarb: loaded725vm-test-run-hermes-remote> client # [    0.590860] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0726vm-test-run-hermes-remote> server # [    0.651010] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint727vm-test-run-hermes-remote> client # [    0.591841] hpet0: 3 comparators, 64-bit 100.000000 MHz counter728vm-test-run-hermes-remote> server # [    0.655179] pci 0000:00:0a.0: BAR 0 [io  0xc080-0xc0bf]729vm-test-run-hermes-remote> server # [    0.656171] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]730vm-test-run-hermes-remote> client # [    0.595131] clocksource: Switched to clocksource kvm-clock731vm-test-run-hermes-remote> server # [    0.657198] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref]732vm-test-run-hermes-remote> client # [    0.597734] VFS: Disk quotas dquot_6.6.0733vm-test-run-hermes-remote> server # [    0.659015] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint734vm-test-run-hermes-remote> client # [    0.598588] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)735vm-test-run-hermes-remote> client # [    0.600154] pnp: PnP ACPI init736vm-test-run-hermes-remote> client # [    0.601073] ACPI: IRQ 4 override to edge(!), high(!)737vm-test-run-hermes-remote> server # [    0.663171] pci 0000:00:0b.0: BAR 0 [io  0xc160-0xc17f]738vm-test-run-hermes-remote> client # [    0.602213] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved739vm-test-run-hermes-remote> server # [    0.664171] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]740vm-test-run-hermes-remote> client # [    0.604077] pnp: PnP ACPI: found 5 devices741vm-test-run-hermes-remote> server # [    0.665217] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref]742vm-test-run-hermes-remote> server # [    0.668172] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint743vm-test-run-hermes-remote> server # [    0.670844] pci 0000:00:1d.0: BAR 4 [io  0xc180-0xc19f]744vm-test-run-hermes-remote> server # [    0.672607] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint745vm-test-run-hermes-remote> client # [    0.613108] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns746vm-test-run-hermes-remote> server # [    0.675207] pci 0000:00:1d.1: BAR 4 [io  0xc1a0-0xc1bf]747vm-test-run-hermes-remote> client # [    0.614887] clocksource: Switched to clocksource acpi_pm748vm-test-run-hermes-remote> client # [    0.616093] NET: Registered PF_INET protocol family749vm-test-run-hermes-remote> server # [    0.676467] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint750vm-test-run-hermes-remote> client # [    0.617425] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)751vm-test-run-hermes-remote> server # [    0.680208] pci 0000:00:1d.2: BAR 4 [io  0xc1c0-0xc1df]752vm-test-run-hermes-remote> server # [    0.681473] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint753vm-test-run-hermes-remote> server # [    0.684171] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff]754vm-test-run-hermes-remote> server # [    0.685451] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint755vm-test-run-hermes-remote> server # [    0.687633] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO756vm-test-run-hermes-remote> server # [    0.689492] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint757vm-test-run-hermes-remote> server # [    0.692207] pci 0000:00:1f.2: BAR 4 [io  0xc1e0-0xc1ff]758vm-test-run-hermes-remote> client # [    0.630935] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)759vm-test-run-hermes-remote> server # [    0.693171] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff]760vm-test-run-hermes-remote> client # [    0.632671] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)761vm-test-run-hermes-remote> server # [    0.695618] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint762vm-test-run-hermes-remote> client # [    0.634254] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)763vm-test-run-hermes-remote> client # [    0.635855] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)764vm-test-run-hermes-remote> server # [    0.697898] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]765vm-test-run-hermes-remote> client # [    0.637337] TCP: Hash tables configured (established 16384 bind 16384)766vm-test-run-hermes-remote> client # [    0.638677] MPTCP token hash table entries: 2048 (order: 4, 49152 bytes, linear)767vm-test-run-hermes-remote> client # [    0.640177] UDP hash table entries: 1024 (order: 4, 65536 bytes, linear)768vm-test-run-hermes-remote> client # [    0.641500] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes, linear)769vm-test-run-hermes-remote> server # [    0.703660] ACPI: PCI: Interrupt link LNKA configured for IRQ 10770vm-test-run-hermes-remote> client # [    0.642945] NET: Registered PF_UNIX/PF_LOCAL protocol family771vm-test-run-hermes-remote> server # [    0.704276] ACPI: PCI: Interrupt link LNKB configured for IRQ 10772vm-test-run-hermes-remote> client # [    0.644117] NET: Registered PF_XDP protocol family773vm-test-run-hermes-remote> server # [    0.706273] ACPI: PCI: Interrupt link LNKC configured for IRQ 11774vm-test-run-hermes-remote> client # [    0.645136] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]775vm-test-run-hermes-remote> server # [    0.707272] ACPI: PCI: Interrupt link LNKD configured for IRQ 11776vm-test-run-hermes-remote> client # [    0.646401] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]777vm-test-run-hermes-remote> server # [    0.708272] ACPI: PCI: Interrupt link LNKE configured for IRQ 10778vm-test-run-hermes-remote> client # [    0.647627] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]779vm-test-run-hermes-remote> server # [    0.709269] ACPI: PCI: Interrupt link LNKF configured for IRQ 10780vm-test-run-hermes-remote> client # [    0.648992] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]781vm-test-run-hermes-remote> server # [    0.711277] ACPI: PCI: Interrupt link LNKG configured for IRQ 11782vm-test-run-hermes-remote> client # [    0.650364] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]783vm-test-run-hermes-remote> server # [    0.712282] ACPI: PCI: Interrupt link LNKH configured for IRQ 11784vm-test-run-hermes-remote> client # [    0.651710] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]785vm-test-run-hermes-remote> server # [    0.713203] ACPI: PCI: Interrupt link GSIA configured for IRQ 16786vm-test-run-hermes-remote> client # [    0.653605] ACPI: \_SB_.GSIA: Enabled at IRQ 16787vm-test-run-hermes-remote> server # [    0.715173] ACPI: PCI: Interrupt link GSIB configured for IRQ 17788vm-test-run-hermes-remote> server # [    0.716177] ACPI: PCI: Interrupt link GSIC configured for IRQ 18789vm-test-run-hermes-remote> client # [    0.655656] ACPI: \_SB_.GSIB: Enabled at IRQ 17790vm-test-run-hermes-remote> server # [    0.717173] ACPI: PCI: Interrupt link GSID configured for IRQ 19791vm-test-run-hermes-remote> server # [    0.718172] ACPI: PCI: Interrupt link GSIE configured for IRQ 20792vm-test-run-hermes-remote> client # [    0.657690] ACPI: \_SB_.GSIC: Enabled at IRQ 18793vm-test-run-hermes-remote> server # [    0.719173] ACPI: PCI: Interrupt link GSIF configured for IRQ 21794vm-test-run-hermes-remote> client # [    0.659702] ACPI: \_SB_.GSID: Enabled at IRQ 19795vm-test-run-hermes-remote> server # [    0.721172] ACPI: PCI: Interrupt link GSIG configured for IRQ 22796vm-test-run-hermes-remote> server # [    0.722172] ACPI: PCI: Interrupt link GSIH configured for IRQ 23797vm-test-run-hermes-remote> client # [    0.661597] PCI: CLS 0 bytes, default 64798vm-test-run-hermes-remote> server # [    0.724348] iommu: Default domain type: Translated799vm-test-run-hermes-remote> client # [    0.662603] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns800vm-test-run-hermes-remote> server # [    0.725133] iommu: DMA domain TLB invalidation policy: lazy mode801vm-test-run-hermes-remote> client # [    0.662640] Trying to unpack rootfs image as initramfs...802vm-test-run-hermes-remote> server # [    0.727387] ACPI: bus type USB registered803vm-test-run-hermes-remote> server # [    0.728216] usbcore: registered new interface driver usbfs804vm-test-run-hermes-remote> server # [    0.729187] usbcore: registered new interface driver hub805vm-test-run-hermes-remote> server # [    0.730213] usbcore: registered new device driver usb806vm-test-run-hermes-remote> server # [    0.732208] NetLabel: Initializing807vm-test-run-hermes-remote> server # [    0.732951] NetLabel:  domain hash size = 128808vm-test-run-hermes-remote> server # [    0.733859] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO809vm-test-run-hermes-remote> server # [    0.735243] NetLabel:  unlabeled traffic allowed by default810vm-test-run-hermes-remote> server # [    0.736180] PCI: Using ACPI for IRQ routing811vm-test-run-hermes-remote> client # [    0.677506] Initialise system trusted keyrings812vm-test-run-hermes-remote> client # [    0.679255] workingset: timestamp_bits=40 max_order=19 bucket_order=0813vm-test-run-hermes-remote> client # [    0.687865] Key type asymmetric registered814vm-test-run-hermes-remote> client # [    0.688776] Asymmetric key parser 'x509' registered815vm-test-run-hermes-remote> client # [    0.689857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)816vm-test-run-hermes-remote> client # [    0.692281] io scheduler mq-deadline registered817vm-test-run-hermes-remote> client # [    0.693249] io scheduler kyber registered818vm-test-run-hermes-remote> client # [    0.695397] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled819vm-test-run-hermes-remote> client # [    0.696938] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A820vm-test-run-hermes-remote> client # [    0.699264] Linux agpgart interface v0.103821vm-test-run-hermes-remote> client # [    0.700192] ACPI: bus type drm_connector registered822vm-test-run-hermes-remote> client # [    0.702492] usbcore: registered new interface driver usbserial_generic823vm-test-run-hermes-remote> client # [    0.703814] usbserial: USB Serial support registered for generic824vm-test-run-hermes-remote> client # [    0.705024] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.825vm-test-run-hermes-remote> client # [    0.705024] Please enable it if your BIOS has the CPPC option.826vm-test-run-hermes-remote> client # [    0.707704] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled827vm-test-run-hermes-remote> client # [    0.709300] drop_monitor: Initializing network drop monitor service828vm-test-run-hermes-remote> client # [    0.710649] NET: Registered PF_INET6 protocol family829vm-test-run-hermes-remote> client # [    0.713303] Segment Routing with IPv6830vm-test-run-hermes-remote> client # [    0.714099] In-situ OAM (IOAM) with IPv6831vm-test-run-hermes-remote> client # [    0.716414] IPI shorthand broadcast: enabled832vm-test-run-hermes-remote> client # [    0.719840] sched_clock: Marking stable (543016259, 176141013)->(800984161, -81826889)833vm-test-run-hermes-remote> client # [    0.721556] registered taskstats version 1834vm-test-run-hermes-remote> client # [    0.722619] Loading compiled-in X.509 certificates835vm-test-run-hermes-remote> client # [    0.731198] Demotion targets for Node 0: null836vm-test-run-hermes-remote> client # [    0.733223] Key type .fscrypt registered837vm-test-run-hermes-remote> client # [    0.734054] Key type fscrypt-provisioning registered838vm-test-run-hermes-remote> client # [    0.735217] ima: No TPM chip found, activating TPM-bypass!839vm-test-run-hermes-remote> client # [    0.736344] ima: Allocated hash algorithm: sha1840vm-test-run-hermes-remote> client # [    0.737330] ima: No architecture policies found841vm-test-run-hermes-remote> client # [    0.740177] PM:   Magic number: 10:624:591842vm-test-run-hermes-remote> client # [    0.741697] RAS: Correctable Errors collector initialized.843vm-test-run-hermes-remote> client # [    0.745445] clk: Disabling unused clocks844vm-test-run-hermes-remote> client # [    0.746311] PM: genpd: Disabling unused power domains845vm-test-run-hermes-remote> server # [    0.813185] pci 0000:00:01.0: vgaarb: setting as boot VGA device846vm-test-run-hermes-remote> server # [    0.814157] pci 0000:00:01.0: vgaarb: bridge control possible847vm-test-run-hermes-remote> server # [    0.814157] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none848vm-test-run-hermes-remote> server # [    0.817165] vgaarb: loaded849vm-test-run-hermes-remote> server # [    0.817984] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0850vm-test-run-hermes-remote> server # [    0.818940] hpet0: 3 comparators, 64-bit 100.000000 MHz counter851vm-test-run-hermes-remote> server # [    0.824263] clocksource: Switched to clocksource kvm-clock852vm-test-run-hermes-remote> server # [    0.826963] VFS: Disk quotas dquot_6.6.0853vm-test-run-hermes-remote> server # [    0.827830] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)854vm-test-run-hermes-remote> server # [    0.829469] pnp: PnP ACPI init855vm-test-run-hermes-remote> server # [    0.830341] ACPI: IRQ 4 override to edge(!), high(!)856vm-test-run-hermes-remote> server # [    0.831461] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved857vm-test-run-hermes-remote> server # [    0.833280] pnp: PnP ACPI: found 5 devices858vm-test-run-hermes-remote> server # [    0.840941] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns859vm-test-run-hermes-remote> server # [    0.842715] clocksource: Switched to clocksource acpi_pm860vm-test-run-hermes-remote> server # [    0.843946] NET: Registered PF_INET protocol family861vm-test-run-hermes-remote> server # [    0.845814] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)862vm-test-run-hermes-remote> server # [    0.859284] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)863vm-test-run-hermes-remote> server # [    0.861018] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)864vm-test-run-hermes-remote> server # [    0.862637] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)865vm-test-run-hermes-remote> server # [    0.865860] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)866vm-test-run-hermes-remote> server # [    0.867426] TCP: Hash tables configured (established 65536 bind 65536)867vm-test-run-hermes-remote> server # [    0.868810] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear)868vm-test-run-hermes-remote> server # [    0.870544] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)869vm-test-run-hermes-remote> server # [    0.872131] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)870vm-test-run-hermes-remote> server # [    0.873682] NET: Registered PF_UNIX/PF_LOCAL protocol family871vm-test-run-hermes-remote> server # [    0.874885] NET: Registered PF_XDP protocol family872vm-test-run-hermes-remote> server # [    0.875904] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]873vm-test-run-hermes-remote> server # [    0.877155] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]874vm-test-run-hermes-remote> server # [    0.878389] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]875vm-test-run-hermes-remote> server # [    0.879747] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]876vm-test-run-hermes-remote> server # [    0.881111] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]877vm-test-run-hermes-remote> server # [    0.882472] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window]878vm-test-run-hermes-remote> server # [    0.884519] ACPI: \_SB_.GSIA: Enabled at IRQ 16879vm-test-run-hermes-remote> server # [    0.886620] ACPI: \_SB_.GSIB: Enabled at IRQ 17880vm-test-run-hermes-remote> server # [    0.888547] ACPI: \_SB_.GSIC: Enabled at IRQ 18881vm-test-run-hermes-remote> server # [    0.890484] ACPI: \_SB_.GSID: Enabled at IRQ 19882vm-test-run-hermes-remote> server # [    0.892169] PCI: CLS 0 bytes, default 64883vm-test-run-hermes-remote> server # [    0.893112] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)884vm-test-run-hermes-remote> server # [    0.893239] Trying to unpack rootfs image as initramfs...885vm-test-run-hermes-remote> server # [    0.893333] software IO TLB: mapped [mem 0x000000007a366000-0x000000007e366000] (64MB)886vm-test-run-hermes-remote> server # [    0.897272] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns887vm-test-run-hermes-remote> client # [    0.843892] Freeing initrd memory: 29100K888vm-test-run-hermes-remote> client # [    0.846765] Freeing unused decrypted memory: 2028K889vm-test-run-hermes-remote> client # [    0.849225] Freeing unused kernel image (initmem) memory: 3656K890vm-test-run-hermes-remote> client # [    0.850499] Write protecting the kernel read-only data: 32768k891vm-test-run-hermes-remote> server # [    0.913179] Initialise system trusted keyrings892vm-test-run-hermes-remote> client # [    0.852452] Freeing unused kernel image (text/rodata gap) memory: 1172K893vm-test-run-hermes-remote> server # [    0.914326] workingset: timestamp_bits=40 max_order=21 bucket_order=0894vm-test-run-hermes-remote> client # [    0.854180] Freeing unused kernel image (rodata/data gap) memory: 684K895vm-test-run-hermes-remote> server # [    0.923164] Key type asymmetric registered896vm-test-run-hermes-remote> server # [    0.924059] Asymmetric key parser 'x509' registered897vm-test-run-hermes-remote> server # [    0.925127] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)898vm-test-run-hermes-remote> server # [    0.926860] io scheduler mq-deadline registered899vm-test-run-hermes-remote> server # [    0.927851] io scheduler kyber registered900vm-test-run-hermes-remote> server # [    0.931025] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled901vm-test-run-hermes-remote> server # [    0.932567] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A902vm-test-run-hermes-remote> server # [    0.935135] Linux agpgart interface v0.103903vm-test-run-hermes-remote> server # [    0.936064] ACPI: bus type drm_connector registered904vm-test-run-hermes-remote> server # [    0.939058] usbcore: registered new interface driver usbserial_generic905vm-test-run-hermes-remote> server # [    0.940395] usbserial: USB Serial support registered for generic906vm-test-run-hermes-remote> server # [    0.941647] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.907vm-test-run-hermes-remote> server # [    0.941647] Please enable it if your BIOS has the CPPC option.908vm-test-run-hermes-remote> server # [    0.944367] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled909vm-test-run-hermes-remote> server # [    0.945978] drop_monitor: Initializing network drop monitor service910vm-test-run-hermes-remote> server # [    0.947346] NET: Registered PF_INET6 protocol family911vm-test-run-hermes-remote> client # [    0.886721] x86/mm: Checked W+X mappings: passed, no W+X pages found.912vm-test-run-hermes-remote> client # [    0.888047] Run /init as init process913vm-test-run-hermes-remote> server # [    0.949049] Segment Routing with IPv6914vm-test-run-hermes-remote> server # [    0.949866] In-situ OAM (IOAM) with IPv6915vm-test-run-hermes-remote> server # [    0.951978] IPI shorthand broadcast: enabled916vm-test-run-hermes-remote> server # [    0.955572] sched_clock: Marking stable (769021034, 185691639)->(977636478, -22923805)917vm-test-run-hermes-remote> server # [    0.957553] registered taskstats version 1918vm-test-run-hermes-remote> client # [    0.897633] systemd[1]: Inserted module 'autofs4'919vm-test-run-hermes-remote> server # [    0.958830] Loading compiled-in X.509 certificates920vm-test-run-hermes-remote> server # [    0.967591] Demotion targets for Node 0: null921vm-test-run-hermes-remote> server # [    0.968772] Key type .fscrypt registered922vm-test-run-hermes-remote> server # [    0.969609] Key type fscrypt-provisioning registered923vm-test-run-hermes-remote> server # [    0.970798] ima: No TPM chip found, activating TPM-bypass!924vm-test-run-hermes-remote> server # [    0.971932] ima: Allocated hash algorithm: sha1925vm-test-run-hermes-remote> server # [    0.972958] ima: No architecture policies found926vm-test-run-hermes-remote> server # [    0.974146] PM:   Magic number: 10:624:591927vm-test-run-hermes-remote> server # [    0.976078] RAS: Correctable Errors collector initialized.928vm-test-run-hermes-remote> client # [    0.915945] fuse: init (API version 7.45)929vm-test-run-hermes-remote> server # [    0.980363] clk: Disabling unused clocks930vm-test-run-hermes-remote> server # [    0.981318] PM: genpd: Disabling unused power domains931vm-test-run-hermes-remote> client # [    0.922599] ACPI: \_SB_.GSIG: Enabled at IRQ 22932vm-test-run-hermes-remote> client # [    0.925234] ACPI: \_SB_.GSIH: Enabled at IRQ 23933vm-test-run-hermes-remote> client # [    0.928703] ACPI: \_SB_.GSIE: Enabled at IRQ 20934vm-test-run-hermes-remote> client # [    0.930951] ACPI: \_SB_.GSIF: Enabled at IRQ 21935vm-test-run-hermes-remote> client # [    0.936342] virtiofs virtio5: discovered new tag: nix-store936vm-test-run-hermes-remote> client # [    0.938416] virtiofs virtio5: virtio_fs_setup_dax: No cache capability937vm-test-run-hermes-remote> client # [    0.945422] virtiofs virtio6: discovered new tag: shared938vm-test-run-hermes-remote> client # [    0.947380] virtiofs virtio6: virtio_fs_setup_dax: No cache capability939vm-test-run-hermes-remote> client # [    0.950805] virtiofs virtio7: discovered new tag: xchg940vm-test-run-hermes-remote> client # [    0.952748] virtiofs virtio7: virtio_fs_setup_dax: No cache capability941vm-test-run-hermes-remote> client # [    0.976830] systemd[1]: Successfully made /usr/ read-only.942vm-test-run-hermes-remote> server # [    1.089914] Freeing initrd memory: 29096K943vm-test-run-hermes-remote> server # [    1.092851] Freeing unused decrypted memory: 2028K944vm-test-run-hermes-remote> server # [    1.095319] Freeing unused kernel image (initmem) memory: 3656K945vm-test-run-hermes-remote> server # [    1.096596] Write protecting the kernel read-only data: 32768k946vm-test-run-hermes-remote> server # [    1.098616] Freeing unused kernel image (text/rodata gap) memory: 1172K947vm-test-run-hermes-remote> server # [    1.100342] Freeing unused kernel image (rodata/data gap) memory: 684K948vm-test-run-hermes-remote> server # [    1.132577] x86/mm: Checked W+X mappings: passed, no W+X pages found.949vm-test-run-hermes-remote> server # [    1.133921] Run /init as init process950vm-test-run-hermes-remote> server # [    1.144226] systemd[1]: Inserted module 'autofs4'951vm-test-run-hermes-remote> server # [    1.163369] fuse: init (API version 7.45)952vm-test-run-hermes-remote> server # [    1.170000] ACPI: \_SB_.GSIG: Enabled at IRQ 22953vm-test-run-hermes-remote> server # [    1.172489] ACPI: \_SB_.GSIH: Enabled at IRQ 23954vm-test-run-hermes-remote> server # [    1.183468] ACPI: \_SB_.GSIE: Enabled at IRQ 20955vm-test-run-hermes-remote> server # [    1.186137] ACPI: \_SB_.GSIF: Enabled at IRQ 21956vm-test-run-hermes-remote> server # [    1.191422] virtiofs virtio5: discovered new tag: nix-store957vm-test-run-hermes-remote> server # [    1.193526] virtiofs virtio5: virtio_fs_setup_dax: No cache capability958vm-test-run-hermes-remote> server # [    1.201160] virtiofs virtio6: discovered new tag: shared959vm-test-run-hermes-remote> server # [    1.203472] virtiofs virtio6: virtio_fs_setup_dax: No cache capability960vm-test-run-hermes-remote> server # [    1.206934] virtiofs virtio7: discovered new tag: xchg961vm-test-run-hermes-remote> server # [    1.208877] virtiofs virtio7: virtio_fs_setup_dax: No cache capability962vm-test-run-hermes-remote> server # [    1.230964] systemd[1]: Successfully made /usr/ read-only.963vm-test-run-hermes-remote> client # [    1.312944] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)964vm-test-run-hermes-remote> client # [    1.318785] systemd[1]: Detected virtualization kvm.965vm-test-run-hermes-remote> client # [    1.319827] systemd[1]: Detected architecture x86-64.966vm-test-run-hermes-remote> client # [    1.320875] systemd[1]: Running in initrd.967vm-test-run-hermes-remote> client # [    1.321984] systemd[1]: Initializing machine ID from random generator.968vm-test-run-hermes-remote> client # [    1.323387] systemd[1]: Hostname set to <client>.969vm-test-run-hermes-remote> client # [    1.400955] systemd[1]: bpf-restrict-fs: LSM BPF program attached970vm-test-run-hermes-remote> client # [    1.423778] systemd[1]: Queued start job for default target Initrd Default Target.971vm-test-run-hermes-remote> client # [    1.439425] systemd[1]: Created slice Slice /system/modprobe.972vm-test-run-hermes-remote> client # [    1.440832] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.973vm-test-run-hermes-remote> client # [    1.442480] systemd[1]: Expecting device /dev/disk/by-label/nixos...974vm-test-run-hermes-remote> client # [    1.443808] systemd[1]: Reached target Path Units.975vm-test-run-hermes-remote> client # [    1.444860] systemd[1]: Reached target Slice Units.976vm-test-run-hermes-remote> client # [    1.445927] systemd[1]: Reached target Swaps.977vm-test-run-hermes-remote> client # [    1.446902] systemd[1]: Reached target Timer Units.978vm-test-run-hermes-remote> client # [    1.448077] systemd[1]: Listening on D-Bus System Message Bus Socket.979vm-test-run-hermes-remote> client # [    1.449528] systemd[1]: Listening on Journal Socket (/dev/log).980vm-test-run-hermes-remote> client # [    1.450879] systemd[1]: Listening on Journal Sockets.981vm-test-run-hermes-remote> client # [    1.452103] systemd[1]: Listening on udev Control Socket.982vm-test-run-hermes-remote> client # [    1.453339] systemd[1]: Listening on udev Kernel Socket.983vm-test-run-hermes-remote> client # [    1.454491] systemd[1]: Reached target Socket Units.984vm-test-run-hermes-remote> client # [    1.456265] systemd[1]: Starting Create List of Static Device Nodes...985vm-test-run-hermes-remote> client # [    1.458193] systemd[1]: Starting Load Kernel Module configfs...986vm-test-run-hermes-remote> client # [    1.461332] systemd[1]: Starting Journal Service...987vm-test-run-hermes-remote> client # [    1.464843] systemd[1]: Starting Load Kernel Modules...988vm-test-run-hermes-remote> client # [    1.466368] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os989vm-test-run-hermes-remote> client # [    1.472216] systemd[1]: Starting Coldplug All udev Devices...990vm-test-run-hermes-remote> client # [    1.478188] systemd[1]: Finished Create List of Static Device Nodes.991vm-test-run-hermes-remote> client # [    1.481580] systemd[1]: modprobe@configfs.service: Deactivated successfully.992vm-test-run-hermes-remote> client # [    1.486021] systemd[1]: Finished Load Kernel Module configfs.993vm-test-run-hermes-remote> client # [    1.486698] systemd-journald[73]: Collecting audit messages is disabled.994vm-test-run-hermes-remote> client # [    1.490377] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config995vm-test-run-hermes-remote> client # [    1.493823] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.996vm-test-run-hermes-remote> client # [    1.501271] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...997vm-test-run-hermes-remote> client # [    1.505605] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev998vm-test-run-hermes-remote> client # [    1.510154] systemd[1]: Finished Load Kernel Modules.999vm-test-run-hermes-remote> server # [    1.566822] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)1000vm-test-run-hermes-remote> server # [    1.573202] systemd[1]: Detected virtualization kvm.1001vm-test-run-hermes-remote> server # [    1.574426] systemd[1]: Detected architecture x86-64.1002vm-test-run-hermes-remote> server # [    1.575496] systemd[1]: Running in initrd.1003vm-test-run-hermes-remote> client # [    1.514920] systemd[1]: Starting Apply Kernel Variables...1004vm-test-run-hermes-remote> server # [    1.576640] systemd[1]: Initializing machine ID from random generator.1005vm-test-run-hermes-remote> server # [    1.578098] systemd[1]: Hostname set to <server>.1006vm-test-run-hermes-remote> client # [    1.519223] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.1007vm-test-run-hermes-remote> client # [    1.530196] systemd[1]: Starting Create Static Device Nodes in /dev...1008vm-test-run-hermes-remote> client # [    1.536556] systemd[1]: Finished Apply Kernel Variables.1009vm-test-run-hermes-remote> client # [    1.545201] systemd[1]: Finished Create Static Device Nodes in /dev.1010vm-test-run-hermes-remote> client # [    1.549409] systemd[1]: Reached target Preparation for Local File Systems.1011vm-test-run-hermes-remote> client # [    1.376408] systemd-modules-load[74]: Using 2 probe threads1012vm-test-run-hermes-remote> client # [    1.377991] systemd-modules-load[74]: Inserte[    1.554216] systemd[1]: Reached target Local File Systems.1013vm-test-run-hermes-remote> client # d module 'virtio_balloon'1014vm-test-run-hermes-remote> client # [    1.382051] systemd-modules-load[74]: Inserted module 'virtio_gpu'1015vm-test-run-hermes-remote> client # [    1.559202] systemd[1]: Starting Rule-based Manager for Device Events and Files...1016vm-test-run-hermes-remote> client # [    1.383399] systemd-modules-load[74]: Inserted module 'dm_mod'1017vm-test-run-hermes-remote> client # [    1.562714] systemd[1]: Started Journal Service.1018vm-test-run-hermes-remote> client # [    1.393060] systemd[1]: Starting Create System Files and Directories...1019vm-test-run-hermes-remote> client # [    1.403487] systemd[1]: Finished Coldplug All udev Devices.1020vm-test-run-hermes-remote> client # [    1.406454] systemd-udevd[84]: Using default interface naming scheme 'v261'.1021vm-test-run-hermes-remote> client # [    1.408181] systemd[1]: Finished Create System Files and Directories.1022vm-test-run-hermes-remote> client # [    1.417277] systemd[1]: Started Rule-based Manager for Device Events and Files.1023vm-test-run-hermes-remote> client # [    1.418413] systemd[1]: Reached target System Initialization.1024vm-test-run-hermes-remote> client # [    1.419467] systemd[1]: Reached target Basic System.1025vm-test-run-hermes-remote> server # [    1.658770] systemd[1]: bpf-restrict-fs: LSM BPF program attached1026vm-test-run-hermes-remote> server # [    1.683474] systemd[1]: Queued start job for default target Initrd Default Target.1027vm-test-run-hermes-remote> server # [    1.699434] systemd[1]: Created slice Slice /system/modprobe.1028vm-test-run-hermes-remote> server # [    1.701004] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.1029vm-test-run-hermes-remote> server # [    1.702740] systemd[1]: Expecting device /dev/disk/by-label/nixos...1030vm-test-run-hermes-remote> server # [    1.704107] systemd[1]: Reached target Path Units.1031vm-test-run-hermes-remote> server # [    1.705181] systemd[1]: Reached target Slice Units.1032vm-test-run-hermes-remote> server # [    1.706280] systemd[1]: Reached target Swaps.1033vm-test-run-hermes-remote> server # [    1.707282] systemd[1]: Reached target Timer Units.1034vm-test-run-hermes-remote> server # [    1.708448] systemd[1]: Listening on D-Bus System Message Bus Socket.1035vm-test-run-hermes-remote> server # [    1.709931] systemd[1]: Listening on Journal Socket (/dev/log).1036vm-test-run-hermes-remote> server # [    1.711285] systemd[1]: Listening on Journal Sockets.1037vm-test-run-hermes-remote> server # [    1.712476] systemd[1]: Listening on udev Control Socket.1038vm-test-run-hermes-remote> server # [    1.713724] systemd[1]: Listening on udev Kernel Socket.1039vm-test-run-hermes-remote> server # [    1.714867] systemd[1]: Reached target Socket Units.1040vm-test-run-hermes-remote> server # [    1.716580] systemd[1]: Starting Create List of Static Device Nodes...1041vm-test-run-hermes-remote> server # [    1.718567] systemd[1]: Starting Load Kernel Module configfs...1042vm-test-run-hermes-remote> server # [    1.721178] systemd[1]: Starting Journal Service...1043vm-test-run-hermes-remote> server # [    1.722908] systemd[1]: Starting Load Kernel Modules...1044vm-test-run-hermes-remote> server # [    1.724059] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1045vm-test-run-hermes-remote> server # [    1.726524] systemd[1]: Starting Coldplug All udev Devices...1046vm-test-run-hermes-remote> server # [    1.728806] systemd[1]: Finished Create List of Static Device Nodes.1047vm-test-run-hermes-remote> server # [    1.730792] systemd[1]: modprobe@configfs.service: Deactivated successfully.1048vm-test-run-hermes-remote> server # [    1.732711] systemd[1]: Finished Load Kernel Module configfs.1049vm-test-run-hermes-remote> server # [    1.734439] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config1050vm-test-run-hermes-remote> server # [    1.736271] systemd-journald[91]: Collecting audit messages is disabled.1051vm-test-run-hermes-remote> server # [    1.738777] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...1052vm-test-run-hermes-remote> server # [    1.743371] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.1053vm-test-run-hermes-remote> server # [    1.745972] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev1054vm-test-run-hermes-remote> server # [    1.750490] systemd[1]: Finished Load Kernel Modules.1055vm-test-run-hermes-remote> server # [    1.752464] systemd[1]: Starting Apply Kernel Variables...1056vm-test-run-hermes-remote> server # [    1.754382] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.1057vm-test-run-hermes-remote> server # [    1.757790] systemd[1]: Starting Create Static Device Nodes in /dev...1058vm-test-run-hermes-remote> server # [    1.761322] systemd[1]: Finished Apply Kernel Variables.1059vm-test-run-hermes-remote> server # [    1.766978] systemd[1]: Finished Create Static Device Nodes in /dev.1060vm-test-run-hermes-remote> server # [    1.768454] systemd[1]: Reached target Preparation for Local File Systems.1061vm-test-run-hermes-remote> server # [    1.769980] systemd[1]: Reached target Local File Systems.1062vm-test-run-hermes-remote> server # [    1.771941] systemd[1]: Starting Rule-based Manager for Device Events and Files...1063vm-test-run-hermes-remote> server # [    1.598479] systemd-modules-load[92]: Using 4 probe threads[    1.785118] systemd[1]: Started Journal Service.1064vm-test-run-hermes-remote> server # 1065vm-test-run-hermes-remote> server # [    1.601459] systemd-modules-load[92]: Inserted module 'virtio_balloon'1066vm-test-run-hermes-remote> server # [    1.602675] systemd-modules-load[92]: Inserted module 'dm_mod'1067vm-test-run-hermes-remote> server # [    1.603801] systemd-modules-load[92]: Inserted module 'virtio_gpu'1068vm-test-run-hermes-remote> client # [    1.729027] virtio_blk virtio2: 2/0/0 default/read/poll queues1069vm-test-run-hermes-remote> server # [    1.605228] systemd[1]: Starting Create System Files and Directories...1070vm-test-run-hermes-remote> client # [    1.732005] virtio_blk virtio2: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)1071vm-test-run-hermes-remote> server # [    1.609123] systemd-udevd[102]: Using default interface naming scheme 'v261'.1072vm-test-run-hermes-remote> server # [    1.614067] systemd[1]: Finished Create System Files and Directories.1073vm-test-run-hermes-remote> server # [    1.620456] systemd[1]: Started Rule-based Manager for Device Events and Files.1074vm-test-run-hermes-remote> server # [    1.624161] systemd[1]: Finished Coldplug All udev Devices.1075vm-test-run-hermes-remote> client # [    1.748967] ehci-pci 0000:00:1d.7: EHCI Host Controller1076vm-test-run-hermes-remote> server # [    1.625885] systemd[1]: Reached target System Initialization.1077vm-test-run-hermes-remote> client # [    1.750286] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 11078vm-test-run-hermes-remote> server # [    1.626823] systemd[1]: Reached target Basic System.1079vm-test-run-hermes-remote> client # [    1.752365] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb0001080vm-test-run-hermes-remote> client # [    1.760161] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.001081vm-test-run-hermes-remote> client # [    1.762391] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.181082vm-test-run-hermes-remote> client # [    1.763660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=11083vm-test-run-hermes-remote> client # [    1.764989] usb usb1: Product: EHCI Host Controller1084vm-test-run-hermes-remote> client # [    1.765876] usb usb1: Manufacturer: Linux 6.18.53 ehci_hcd1085vm-test-run-hermes-remote> client # [    1.767197] usb usb1: SerialNumber: 0000:00:1d.71086vm-test-run-hermes-remote> client # [    1.768728] hub 1-0:1.0: USB hub found1087vm-test-run-hermes-remote> client # [    1.769650] hub 1-0:1.0: 6 ports detected1088vm-test-run-hermes-remote> client # [    1.772155] uhci_hcd 0000:00:1d.0: UHCI Host Controller1089vm-test-run-hermes-remote> client # [    1.772979] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 21090vm-test-run-hermes-remote> client # [    1.776356] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,121091vm-test-run-hermes-remote> client # [    1.777550] uhci_hcd 0000:00:1d.0: detected 2 ports1092vm-test-run-hermes-remote> client # [    1.602789] systemd[1]: Starting Virtual Console Setup...1093vm-test-run-hermes-remote> client # [    1.784070] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c1801094vm-test-run-hermes-remote> client # [    1.609329] (udev-worker)[96]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to devi[    1.786452] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.181095vm-test-run-hermes-remote> client # ce based on potentially unpredictable interface [    1.788044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=11096vm-test-run-hermes-remote> client # name.1097vm-test-run-hermes-remote> client # [    1.789452] usb usb2: Product: UHCI Host Controller1098vm-test-run-hermes-remote> client # [    1.613717] (udev-worker)[96]: Network interface NamePolicy= disabled on kernel command line.1099vm-test-run-hermes-remote> client # [    1.619618] (udev-worker)[105]: Network interface NamePolicy= disabled on kernel command line.1100vm-test-run-hermes-remote> client # [    1.623323] systemd-vconsole-setup[113]: Configuration of first virtual console was skipped, ignoring remaining ones.1101vm-test-run-hermes-remote> client # [    1.625835] systemd[1]: Finished Virtual Cons[    1.802190] usb usb2: Manufacturer: Linux 6.18.53 uhci_hcd1102vm-test-run-hermes-remote> client # ole Setup.1103vm-test-run-hermes-remote> client # [    1.803308] usb usb2: SerialNumber: 0000:00:1d.01104vm-test-run-hermes-remote> client # [    1.807024] serio: i8042 KBD port at 0x60,0x64 irq 11105vm-test-run-hermes-remote> client # [    1.813773] hub 2-0:1.0: USB hub found1106vm-test-run-hermes-remote> client # [    1.814300] serio: i8042 AUX port at 0x60,0x64 irq 121107vm-test-run-hermes-remote> client # [    1.817517] hub 2-0:1.0: 2 ports detected1108vm-test-run-hermes-remote> client # [    1.642767] systemd[1]: Found device /dev/disk/by-label/nixos.1109vm-test-run-hermes-remote> client # [    1.644169] systemd[1]: Reached target Initrd Root Device.1110vm-test-run-hermes-remote> client # [    1.646472] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...1111vm-test-run-hermes-remote> client # [    1.823924] uhci_hcd 0000:00:1d.1: UHCI Host Controller1112vm-test-run-hermes-remote> client # [    1.824770] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 31113vm-test-run-hermes-remote> client # [    1.826549] uhci_hcd 0000:00:1d.1: detected 2 ports1114vm-test-run-hermes-remote> client # [    1.827686] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c1a01115vm-test-run-hermes-remote> client # [    1.828992] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.181116vm-test-run-hermes-remote> client # [    1.830435] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=11117vm-test-run-hermes-remote> client # [    1.830658] SCSI subsystem initialized1118vm-test-run-hermes-remote> client # [    1.830735] usb usb3: Product: UHCI Host Controller1119vm-test-run-hermes-remote> client # [    1.833030] usb usb3: Manufacturer: Linux 6.18.53 uhci_hcd1120vm-test-run-hermes-remote> client # [    1.833903] usb usb3: SerialNumber: 0000:00:1d.11121vm-test-run-hermes-remote> client # [    1.835793] hub 3-0:1.0: USB hub found1122vm-test-run-hermes-remote> client # [    1.837177] hub 3-0:1.0: 2 ports detected1123vm-test-run-hermes-remote> server # [    1.898477] ehci-pci 0000:00:1d.7: EHCI Host Controller1124vm-test-run-hermes-remote> server # [    1.899357] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 11125vm-test-run-hermes-remote> server # [    1.900796] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb0001126vm-test-run-hermes-remote> client # [    1.840267] uhci_hcd 0000:00:1d.2: UHCI Host Controller1127vm-test-run-hermes-remote> client # [    1.841094] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 41128vm-test-run-hermes-remote> server # [    1.903159] virtio_blk virtio2: 4/0/0 default/read/poll queues1129vm-test-run-hermes-remote> client # [    1.843081] uhci_hcd 0000:00:1d.2: detected 2 ports1130vm-test-run-hermes-remote> client # [    1.844186] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input01131vm-test-run-hermes-remote> client # [    1.844600] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c1c01132vm-test-run-hermes-remote> client # [    1.846987] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.181133vm-test-run-hermes-remote> server # [    1.908715] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.001134vm-test-run-hermes-remote> client # [    1.848502] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=11135vm-test-run-hermes-remote> server # [    1.909803] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.181136vm-test-run-hermes-remote> client # [    1.849974] usb usb4: Product: UHCI Host Controller1137vm-test-run-hermes-remote> server # [    1.911081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=11138vm-test-run-hermes-remote> server # [    1.912539] usb usb1: Product: EHCI Host Controller1139vm-test-run-hermes-remote> client # [    1.851536] usb usb4: Manufacturer: Linux 6.18.53 uhci_hcd1140vm-test-run-hermes-remote> client # [    1.852994] usb usb4: SerialNumber: 0000:00:1d.21141vm-test-run-hermes-remote> server # [    1.913202] virtio_blk virtio2: [vda] 50331648 512-byte logical blocks (25.8 GB/24.0 GiB)1142vm-test-run-hermes-remote> server # [    1.913394] usb usb1: Manufacturer: Linux 6.18.53 ehci_hcd1143vm-test-run-hermes-remote> client # [    1.854224] hub 4-0:1.0: USB hub found1144vm-test-run-hermes-remote> client # [    1.855005] hub 4-0:1.0: 2 ports detected1145vm-test-run-hermes-remote> server # [    1.916371] usb usb1: SerialNumber: 0000:00:1d.71146vm-test-run-hermes-remote> server # [    1.916418] SCSI subsystem initialized1147vm-test-run-hermes-remote> server # [    1.916764] hub 1-0:1.0: USB hub found1148vm-test-run-hermes-remote> server # [    1.918690] hub 1-0:1.0: 6 ports detected1149vm-test-run-hermes-remote> client # [    1.681897] systemd-fsck[120]: nixos: clean, 12/65536 files, 13019/262144 blocks1150vm-test-run-hermes-remote> client # [    1.684647] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.1151vm-test-run-hermes-remote> server # [    1.930164] uhci_hcd 0000:00:1d.0: UHCI Host Controller1152vm-test-run-hermes-remote> server # [    1.932064] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 21153vm-test-run-hermes-remote> server # [    1.933455] uhci_hcd 0000:00:1d.0: detected 2 ports1154vm-test-run-hermes-remote> server # [    1.935125] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c1801155vm-test-run-hermes-remote> server # [    1.937458] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.181156vm-test-run-hermes-remote> server # [    1.938856] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=11157vm-test-run-hermes-remote> server # [    1.940094] usb usb2: Product: UHCI Host Controller1158vm-test-run-hermes-remote> server # [    1.940934] usb usb2: Manufacturer: Linux 6.18.53 uhci_hcd1159vm-test-run-hermes-remote> server # [    1.942019] usb usb2: SerialNumber: 0000:00:1d.01160vm-test-run-hermes-remote> server # [    1.942943] hub 2-0:1.0: USB hub found1161vm-test-run-hermes-remote> server # [    1.943616] hub 2-0:1.0: 2 ports detected1162vm-test-run-hermes-remote> client # [    1.882858] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode1163vm-test-run-hermes-remote> client # [    1.884150] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)1164vm-test-run-hermes-remote> client # [    1.885146] ahci 0000:00:1f.2: flags: 64bit ncq only1165vm-test-run-hermes-remote> client # [    1.888170] scsi host0: ahci1166vm-test-run-hermes-remote> client # [    1.889280] scsi host1: ahci1167vm-test-run-hermes-remote> client # [    1.890378] scsi host2: ahci1168vm-test-run-hermes-remote> client # [    1.891692] scsi host3: ahci1169vm-test-run-hermes-remote> client # [    1.892429] scsi host4: ahci1170vm-test-run-hermes-remote> client # [    1.893927] scsi host5: ahci1171vm-test-run-hermes-remote> server # [    1.953489] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,121172vm-test-run-hermes-remote> server # [    1.954148] uhci_hcd 0000:00:1d.1: UHCI Host Controller1173vm-test-run-hermes-remote> client # [    1.894608] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 48 lpm-pol 11174vm-test-run-hermes-remote> server # [    1.955723] serio: i8042 KBD port at 0x60,0x64 irq 11175vm-test-run-hermes-remote> client # [    1.896189] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 48 lpm-pol 11176vm-test-run-hermes-remote> server # [    1.958102] serio: i8042 AUX port at 0x60,0x64 irq 121177vm-test-run-hermes-remote> client # [    1.897536] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 48 lpm-pol 11178vm-test-run-hermes-remote> server # [    1.959056] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 31179vm-test-run-hermes-remote> client # [    1.898887] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 48 lpm-pol 11180vm-test-run-hermes-remote> server # [    1.960557] uhci_hcd 0000:00:1d.1: detected 2 ports1181vm-test-run-hermes-remote> client # [    1.900312] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 48 lpm-pol 11182vm-test-run-hermes-remote> server # [    1.962161] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c1a01183vm-test-run-hermes-remote> client # [    1.901679] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 48 lpm-pol 11184vm-test-run-hermes-remote> server # [    1.963870] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.181185vm-test-run-hermes-remote> server # [    1.965397] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=11186vm-test-run-hermes-remote> server # [    1.965442] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode1187vm-test-run-hermes-remote> server # [    1.966462] usb usb3: Product: UHCI Host Controller1188vm-test-run-hermes-remote> server # [    1.966886] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)1189vm-test-run-hermes-remote> server # [    1.966888] ahci 0000:00:1f.2: flags: 64bit ncq only1190vm-test-run-hermes-remote> server # [    1.970535] usb usb3: Manufacturer: Linux 6.18.53 uhci_hcd1191vm-test-run-hermes-remote> server # [    1.971428] usb usb3: SerialNumber: 0000:00:1d.11192vm-test-run-hermes-remote> server # [    1.982137] hub 3-0:1.0: USB hub found1193vm-test-run-hermes-remote> server # [    1.982825] hub 3-0:1.0: 2 ports detected1194vm-test-run-hermes-remote> server # [    1.798649] systemd[1]: Starting Virtual Console Setup...1195vm-test-run-hermes-remote> server # [    1.799898] (udev-worker)[132]:     1.985903] uhci_hcd 0000:00:1d.2: UHCI Host Controller1196vm-test-run-hermes-remote> server # 1;38:5:185meth1: Config file /etc/systemd/network/40-eth1.link is applied to dev[    1.987469] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 41197vm-test-run-hermes-remote> server # ice based on potentially unpredictable interface[    1.989038] uhci_hcd 0000:00:1d.2: detected 2 ports1198vm-test-run-hermes-remote> server #  name.1199vm-test-run-hermes-remote> server # [    1.990300] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c1c01200vm-test-run-hermes-remote> server # [    1.991392] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.181201vm-test-run-hermes-remote> server # [    1.805511] (udev-worker)[132[    1.991394] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=11202vm-test-run-hermes-remote> server # ]: Network interface NamePolicy=[    1.991396] usb usb4: Product: UHCI Host Controller1203vm-test-run-hermes-remote> server #  disabled on kernel command line[    1.991400] usb usb4: Manufacturer: Linux 6.18.53 uhci_hcd1204vm-test-run-hermes-remote> server # .1205vm-test-run-hermes-remote> server # [    1.991401] usb usb4: SerialNumber: 0000:00:1d.21206vm-test-run-hermes-remote> server # [    1.992189] hub 4-0:1.0: USB hub found1207vm-test-run-hermes-remote> server # [    1.996547] scsi host0: ahci1208vm-test-run-hermes-remote> server # [    1.997141] hub 4-0:1.0: 2 ports detected1209vm-test-run-hermes-remote> server # [    1.814499] (udev-worker)[117]: Network interface NamePolicy= disabled on kernel command line.1210vm-test-run-hermes-remote> server # [    2.000954] scsi host1: ahci1211vm-test-run-hermes-remote> server # [    2.002102] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input01212vm-test-run-hermes-remote> server # [    1.821836] systemd-vconsole-setup[141]: Configuration of first virtual console was skipped, ignoring remaining ones.1213vm-test-run-hermes-remote> server # [    1.827056] systemd[1]: Found device /dev/disk/by-label/nixos.1214vm-test-run-hermes-remote> server # [    2.013356] scsi host2: ahci1215vm-test-run-hermes-remote> server # [    1.828660] systemd[1]: Finished Virtual Console Setup.1216vm-test-run-hermes-remote> server # [    2.015135] scsi host3: ahci1217vm-test-run-hermes-remote> server # [    1.829887] systemd[1]: Reached target Initrd Root Device.1218vm-test-run-hermes-remote> server # [    1.831031] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...1219vm-test-run-hermes-remote> server # [    2.017831] scsi host4: ahci1220vm-test-run-hermes-remote> server # [    2.018584] scsi host5: ahci1221vm-test-run-hermes-remote> server # [    2.019424] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 50 lpm-pol 11222vm-test-run-hermes-remote> server # [    2.020738] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 50 lpm-pol 11223vm-test-run-hermes-remote> server # [    2.022026] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 50 lpm-pol 11224vm-test-run-hermes-remote> server # [    2.023298] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 50 lpm-pol 11225vm-test-run-hermes-remote> server # [    2.024566] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 50 lpm-pol 11226vm-test-run-hermes-remote> server # [    2.025853] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 50 lpm-pol 11227vm-test-run-hermes-remote> server # [    1.851433] systemd-fsck[173]: nixos: clean, 12/1572864 files, 142772/6291456 blocks1228vm-test-run-hermes-remote> server # [    1.853905] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.1229vm-test-run-hermes-remote> client # [    2.009210] usb 1-1: new high-speed USB device number 2 using ehci-pci1230vm-test-run-hermes-remote> server # [    2.160741] usb 1-1: new high-speed USB device number 2 using ehci-pci1231vm-test-run-hermes-remote> client # [    2.138943] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.001232vm-test-run-hermes-remote> client # [    2.140223] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=101233vm-test-run-hermes-remote> client # [    2.141383] usb 1-1: Product: QEMU USB Tablet1234vm-test-run-hermes-remote> client # [    2.142089] usb 1-1: Manufacturer: QEMU1235vm-test-run-hermes-remote> client # [    2.142751] usb 1-1: SerialNumber: 28754-0000:00:1d.7-11236vm-test-run-hermes-remote> client # [    2.153653] hid: raw HID events driver (C) Jiri Kosina1237vm-test-run-hermes-remote> client # [    2.222438] ata2: SATA link down (SStatus 0 SControl 300)1238vm-test-run-hermes-remote> client # [    2.223473] ata4: SATA link down (SStatus 0 SControl 300)1239vm-test-run-hermes-remote> client # [    2.224686] ata1: SATA link down (SStatus 0 SControl 300)1240vm-test-run-hermes-remote> client # [    2.225736] ata6: SATA link down (SStatus 0 SControl 300)1241vm-test-run-hermes-remote> client # [    2.226790] ata5: SATA link down (SStatus 0 SControl 300)1242vm-test-run-hermes-remote> client # [    2.227831] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)1243vm-test-run-hermes-remote> client # [    2.228888] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/1001244vm-test-run-hermes-remote> client # [    2.229775] ata3.00: applying bridge limits1245vm-test-run-hermes-remote> server # [    2.290545] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.001246vm-test-run-hermes-remote> client # [    2.230581] ata3.00: configured for UDMA/1001247vm-test-run-hermes-remote> server # [    2.291826] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=101248vm-test-run-hermes-remote> server # [    2.293021] usb 1-1: Product: QEMU USB Tablet1249vm-test-run-hermes-remote> client # [    2.231715] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 51250vm-test-run-hermes-remote> server # [    2.293771] usb 1-1: Manufacturer: QEMU1251vm-test-run-hermes-remote> server # [    2.294415] usb 1-1: SerialNumber: 28754-0000:00:1d.7-11252vm-test-run-hermes-remote> server # [    2.305507] hid: raw HID events driver (C) Jiri Kosina1253vm-test-run-hermes-remote> client # [    2.256864] usbcore: registered new interface driver usbhid1254vm-test-run-hermes-remote> client # [    2.257869] usbhid: USB HID core driver1255vm-test-run-hermes-remote> client # [    2.264413] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input21256vm-test-run-hermes-remote> client # [    2.266319] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input01257vm-test-run-hermes-remote> client # [    2.281342] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray1258vm-test-run-hermes-remote> server # [    2.343385] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)1259vm-test-run-hermes-remote> server # [    2.344515] ata5: SATA link down (SStatus 0 SControl 300)1260vm-test-run-hermes-remote> server # [    2.345564] ata6: SATA link down (SStatus 0 SControl 300)1261vm-test-run-hermes-remote> server # [    2.346626] ata2: SATA link down (SStatus 0 SControl 300)1262vm-test-run-hermes-remote> server # [    2.347697] ata1: SATA link down (SStatus 0 SControl 300)1263vm-test-run-hermes-remote> server # [    2.348733] ata4: SATA link down (SStatus 0 SControl 300)1264vm-test-run-hermes-remote> server # [    2.349678] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/1001265vm-test-run-hermes-remote> server # [    2.350544] ata3.00: applying bridge limits1266vm-test-run-hermes-remote> server # [    2.351386] ata3.00: configured for UDMA/1001267vm-test-run-hermes-remote> server # [    2.352531] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 51268vm-test-run-hermes-remote> client # [    2.304301] cdrom: Uniform CD-ROM driver Revision: 3.201269vm-test-run-hermes-remote> server # [    2.374039] usbcore: registered new interface driver usbhid1270vm-test-run-hermes-remote> server # [    2.374944] usbhid: USB HID core driver1271vm-test-run-hermes-remote> server # [    2.378409] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input21272vm-test-run-hermes-remote> server # [    2.380154] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input01273vm-test-run-hermes-remote> server # [    2.397893] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray1274vm-test-run-hermes-remote> server # [    2.442917] cdrom: Uniform CD-ROM driver Revision: 3.201275vm-test-run-hermes-remote> client # [    2.298616] systemd[1]: Mounting /sysroot...1276vm-test-run-hermes-remote> client # [    2.555835] EXT4-fs (vda): mounted filesystem cb5de15d-2526-4cd2-9da6-79ba23a0e9c1 r/w with ordered data mode. Quota mode: none.1277vm-test-run-hermes-remote> client # [    2.383305] systemd[1]: Mounted /sysroot.1278vm-test-run-hermes-remote> client # [    2.384174] systemd[1]: Reached target Initrd Root File System.1279vm-test-run-hermes-remote> client # [    2.386065] systemd[1]: Mounting /sysroot/nix/.ro-store...1280vm-test-run-hermes-remote> client # [    2.387216] systemd[1]: Mounting /sysroot/nix/.rw-store...1281vm-test-run-hermes-remote> client # [    2.399209] systemd[1]: Mounting /sysroot/run...1282vm-test-run-hermes-remote> client # [    2.402363] systemd[1]: Mounting /sysroot/tmp/shared...1283vm-test-run-hermes-remote> client # [    2.404247] systemd[1]: Mounting /sysroot/tmp/xchg...1284vm-test-run-hermes-remote> client # [    2.413129] systemd[1]: Starting Mountpoints Configured in the Real Root...1285vm-test-run-hermes-remote> client # [    2.415626] systemd[1]: Mounted /sysroot/nix/.ro-store.1286vm-test-run-hermes-remote> client # [    2.416922] systemd[1]: Mounted /sysroot/nix/.rw-store.1287vm-test-run-hermes-remote> client # [    2.417880] systemd[1]: Mounted /sysroot/tmp/shared.1288vm-test-run-hermes-remote> client # [    2.420725] systemd[1]: Mounted /sysroot/run.1289vm-test-run-hermes-remote> client # [    2.421598] systemd[1]: Mounted /sysroot/tmp/xchg.1290vm-test-run-hermes-remote> client # [    2.422609] systemd[1]: Starting rw-sysroot-nix-store.service...1291vm-test-run-hermes-remote> client # [    2.423806] systemd-sysroot-fstab-check[162]: /sysroot should be mounted in the initrd, will request daemon-reload.1292vm-test-run-hermes-remote> client # [    2.425985] systemd[1]: Reload requested from client PID 162 ('systemd-sysroot') (unit initrd-parse-etc.service)...1293vm-test-run-hermes-remote> client # [    2.427819] systemd[1]: Reloading...1294vm-test-run-hermes-remote> client # [    2.466831] systemd[1]: Reloading finished in 40 ms.1295vm-test-run-hermes-remote> server # [    2.543845] systemd[1]: Mounting /sysroot...1296vm-test-run-hermes-remote> client # [    2.494110] systemd-sysroot-fstab-check[162]: Requesting initrd-fs.target/start/replace...1297vm-test-run-hermes-remote> client # [    2.495650] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1298vm-test-run-hermes-remote> client # [    2.496905] systemd[1]: Finished rw-sysroot-nix-store.service.1299vm-test-run-hermes-remote> client # [    2.498142] systemd-sysroot-fstab-check[162]: Requesting swap.target/start/replace...1300vm-test-run-hermes-remote> client # [    2.499438] systemd[1]: Starting rw-sysroot-nix-store.service...1301vm-test-run-hermes-remote> client # [    2.501512] systemd[1]: initrd-parse-etc.service: Deactivated successfully.1302vm-test-run-hermes-remote> client # [    2.504814] systemd[1]: Finished Mountpoints Configured in the Real Root.1303vm-test-run-hermes-remote> client # [    2.505966] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.1304vm-test-run-hermes-remote> client # [    2.507791] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1305vm-test-run-hermes-remote> client # [    2.509322] systemd[1]: Finished rw-sysroot-nix-store.service.1306vm-test-run-hermes-remote> server # [    2.805461] EXT4-fs (vda): mounted filesystem 9222e41e-1ddf-4966-a94e-52574bb11a84 r/w with ordered data mode. Quota mode: none.1307vm-test-run-hermes-remote> server # [    2.622747] systemd[1]: Mounted /sysroot.1308vm-test-run-hermes-remote> server # [    2.623571] systemd[1]: Reached target Initrd Root File System.1309vm-test-run-hermes-remote> server # [    2.625351] systemd[1]: Mounting /sysroot/nix/.ro-store...1310vm-test-run-hermes-remote> server # [    2.626719] systemd[1]: Mounting /sysroot/nix/.rw-store...1311vm-test-run-hermes-remote> server # [    2.637836] systemd[1]: Mounting /sysroot/run...1312vm-test-run-hermes-remote> server # [    2.639952] systemd[1]: Mounting /sysroot/tmp/shared...1313vm-test-run-hermes-remote> server # [    2.642323] systemd[1]: Mounting /sysroot/tmp/xchg...1314vm-test-run-hermes-remote> server # [    2.643753] systemd[1]: Starting Mountpoints Configured in the Real Root...1315vm-test-run-hermes-remote> server # [    2.647516] systemd[1]: Mounted /sysroot/nix/.ro-store.1316vm-test-run-hermes-remote> server # [    2.648461] systemd[1]: Mounted /sysroot/nix/.rw-store.1317vm-test-run-hermes-remote> server # [    2.649379] systemd[1]: Mounted /sysroot/run.1318vm-test-run-hermes-remote> server # [    2.650203] systemd[1]: Mounted /sysroot/tmp/shared.1319vm-test-run-hermes-remote> server # [    2.651269] systemd-sysroot-fstab-check[193]: /sysroot should be mounted in the initrd, will request daemon-reload.1320vm-test-run-hermes-remote> server # [    2.652964] systemd[1]: Mounted /sysroot/tmp/xchg.1321vm-test-run-hermes-remote> server # [    2.653848] systemd[1]: Starting rw-sysroot-nix-store.service...1322vm-test-run-hermes-remote> server # [    2.654907] systemd[1]: Reload requested from client PID 193 ('systemd-sysroot') (unit initrd-parse-etc.service)...1323vm-test-run-hermes-remote> server # [    2.656715] systemd[1]: Reloading...1324vm-test-run-hermes-remote> server # [    2.689305] systemd[1]: Reloading finished in 35 ms.1325vm-test-run-hermes-remote> server # [    2.721242] systemd-sysroot-fstab-check[193]: Requesting initrd-fs.target/start/replace...1326vm-test-run-hermes-remote> server # [    2.723418] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1327vm-test-run-hermes-remote> server # [    2.724855] systemd[1]: Finished rw-sysroot-nix-store.service.1328vm-test-run-hermes-remote> server # [    2.726804] systemd-sysroot-fstab-check[193]: Requesting swap.target/start/replace...1329vm-test-run-hermes-remote> server # [    2.729163] systemd[1]: initrd-parse-etc.service: Deactivated successfully.1330vm-test-run-hermes-remote> server # [    2.730562] systemd[1]: Finished Mountpoints Configured in the Real Root.1331vm-test-run-hermes-remote> server # [    2.731614] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.1332vm-test-run-hermes-remote> server # [    2.733684] systemd[1]: Starting rw-sysroot-nix-store.service...1333vm-test-run-hermes-remote> server # [    2.745154] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1334vm-test-run-hermes-remote> server # [    2.746343] systemd[1]: Finished rw-sysroot-nix-store.service.1335vm-test-run-hermes-remote> client # [    3.299289] systemd[1]: Mounting /sysroot/nix/store...1336vm-test-run-hermes-remote> client # [    3.324269] systemd[1]: Mounted /sysroot/nix/store.1337vm-test-run-hermes-remote> client # [    3.325329] systemd[1]: Reached target Initrd File Systems.1338vm-test-run-hermes-remote> client # [    3.326401] systemd[1]: Starting Find NixOS closure...1339vm-test-run-hermes-remote> client # [    3.328390] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...1340vm-test-run-hermes-remote> client # [    3.342140] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.1341vm-test-run-hermes-remote> client # [    3.343618] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.1342vm-test-run-hermes-remote> client # [    3.349930] systemd[1]: Finished Find NixOS closure.1343vm-test-run-hermes-remote> client # [    3.350931] systemd[1]: Reached target Initrd Default Target.1344vm-test-run-hermes-remote> client # [    3.352047] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...1345vm-test-run-hermes-remote> client # [    3.361704] systemd[1]: Stopped target Initrd Default Target.1346vm-test-run-hermes-remote> client # [    3.363067] systemd[1]: Stopped target Basic System.1347vm-test-run-hermes-remote> client # [    3.364440] systemd[1]: Stopped target Initrd Root Device.1348vm-test-run-hermes-remote> client # [    3.365506] systemd[1]: Stopped target Path Units.1349vm-test-run-hermes-remote> client # [    3.366481] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.1350vm-test-run-hermes-remote> client # [    3.369553] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.1351vm-test-run-hermes-remote> client # [    3.370964] systemd[1]: Stopped target Slice Units.1352vm-test-run-hermes-remote> client # [    3.371963] systemd[1]: Stopped target Socket Units.1353vm-test-run-hermes-remote> client # [    3.372963] systemd[1]: Stopped target System Initialization.1354vm-test-run-hermes-remote> client # [    3.374131] systemd[1]: Stopped target Swaps.1355vm-test-run-hermes-remote> client # [    3.375042] systemd[1]: Stopped target Timer Units.1356vm-test-run-hermes-remote> client # [    3.376582] systemd[1]: dbus.socket: Deactivated successfully.1357vm-test-run-hermes-remote> client # [    3.377968] systemd[1]: Closed D-Bus System Message Bus Socket.1358vm-test-run-hermes-remote> client # [    3.381476] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.1359vm-test-run-hermes-remote> client # [    3.382897] systemd[1]: Stopped Find NixOS closure.1360vm-test-run-hermes-remote> client # [    3.384715] systemd[1]: Starting rw-sysroot-nix-store.service...1361vm-test-run-hermes-remote> client # [    3.386049] systemd[1]: systemd-sysctl.service: Deactivated successfully.1362vm-test-run-hermes-remote> client # [    3.387309] systemd[1]: Stopped Apply Kernel Variables.1363vm-test-run-hermes-remote> client # [    3.388351] systemd[1]: systemd-modules-load.service: Deactivated successfully.1364vm-test-run-hermes-remote> client # [    3.389733] systemd[1]: Stopped Load Kernel Modules.1365vm-test-run-hermes-remote> client # [    3.390747] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.1366vm-test-run-hermes-remote> client # [    3.392197] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.1367vm-test-run-hermes-remote> client # [    3.393604] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.1368vm-test-run-hermes-remote> client # [    3.394972] systemd[1]: Stopped Create System Files and Directories.1369vm-test-run-hermes-remote> client # [    3.396311] systemd[1]: Stopped target Local File Systems.1370vm-test-run-hermes-remote> client # [    3.397455] systemd[1]: Stopped target Preparation for Local File Systems.1371vm-test-run-hermes-remote> client # [    3.398716] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.1372vm-test-run-hermes-remote> client # [    3.400048] systemd[1]: Stopped Coldplug All udev Devices.1373vm-test-run-hermes-remote> client # [    3.401818] systemd[1]: Stopping Rule-based Manager for Device Events and Files...1374vm-test-run-hermes-remote> client # [    3.404286] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1375vm-test-run-hermes-remote> client # [    3.405619] systemd[1]: Stopped Virtual Console Setup.1376vm-test-run-hermes-remote> client # [    3.406631] systemd[1]: initrd-cleanup.service: Deactivated successfully.1377vm-test-run-hermes-remote> client # [    3.407881] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.1378vm-test-run-hermes-remote> client # [    3.409161] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1379vm-test-run-hermes-remote> client # [    3.410487] systemd[1]: Finished rw-sysroot-nix-store.service.1380vm-test-run-hermes-remote> client # [    3.411630] systemd[1]: systemd-udevd.service: Deactivated successfully.1381vm-test-run-hermes-remote> client # [    3.412953] systemd[1]: Stopped Rule-based Manager for Device Events and Files.1382vm-test-run-hermes-remote> client # [    3.414355] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.1383vm-test-run-hermes-remote> client # [    3.415678] systemd[1]: Closed udev Control Socket.1384vm-test-run-hermes-remote> client # [    3.416676] systemd[1]: Starting Cleanup udev Database...1385vm-test-run-hermes-remote> client # [    3.417732] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.1386vm-test-run-hermes-remote> client # [    3.419159] systemd[1]: Stopped Create Static Device Nodes in /dev.1387vm-test-run-hermes-remote> client # [    3.420323] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.1388vm-test-run-hermes-remote> client # [    3.421793] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.1389vm-test-run-hermes-remote> client # [    3.423145] systemd[1]: kmod-static-nodes.service: Deactivated successfully.1390vm-test-run-hermes-remote> client # [    3.424415] systemd[1]: Stopped Create List of Static Device Nodes.1391vm-test-run-hermes-remote> client # [    3.425516] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.1392vm-test-run-hermes-remote> client # [    3.426776] systemd[1]: Finished Cleanup udev Database.1393vm-test-run-hermes-remote> client # [    3.427685] systemd[1]: Reached target Switch Root.1394vm-test-run-hermes-remote> client # [    3.428581] systemd[1]: Starting NixOS Activation...1395vm-test-run-hermes-remote> client # [    3.471472] initrd-nixos-activation-start[208]: booting system configuration /nix/store/7pv67q5bm0bn1bnjn20hh25yc175gzqr-nixos-system-client-test1396vm-test-run-hermes-remote> server # [    3.544049] systemd[1]: Mounting /sysroot/nix/store...1397vm-test-run-hermes-remote> client # [    3.493267] initrd-nixos-activation-start[208]: running activation script...1398vm-test-run-hermes-remote> server # [    3.566555] systemd[1]: Mounted /sysroot/nix/store.1399vm-test-run-hermes-remote> server # [    3.567617] systemd[1]: Reached target Initrd File Systems.1400vm-test-run-hermes-remote> server # [    3.568646] systemd[1]: Starting Find NixOS closure...1401vm-test-run-hermes-remote> server # [    3.569677] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...1402vm-test-run-hermes-remote> server # [    3.586917] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.1403vm-test-run-hermes-remote> server # [    3.588425] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.1404vm-test-run-hermes-remote> server # [    3.592531] systemd[1]: Finished Find NixOS closure.1405vm-test-run-hermes-remote> server # [    3.593495] systemd[1]: Reached target Initrd Default Target.1406vm-test-run-hermes-remote> server # [    3.594584] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...1407vm-test-run-hermes-remote> server # [    3.602655] systemd[1]: Stopped target Initrd Default Target.1408vm-test-run-hermes-remote> server # [    3.603759] systemd[1]: Stopped target Basic System.1409vm-test-run-hermes-remote> server # [    3.604714] systemd[1]: Stopped target Initrd Root Device.1410vm-test-run-hermes-remote> server # [    3.605746] systemd[1]: Stopped target Path Units.1411vm-test-run-hermes-remote> server # [    3.606674] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.1412vm-test-run-hermes-remote> server # [    3.607995] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.1413vm-test-run-hermes-remote> server # [    3.609321] systemd[1]: Stopped target Slice Units.1414vm-test-run-hermes-remote> server # [    3.610202] systemd[1]: Stopped target Socket Units.1415vm-test-run-hermes-remote> server # [    3.611089] systemd[1]: Stopped target System Initialization.1416vm-test-run-hermes-remote> server # [    3.612115] systemd[1]: Stopped target Swaps.1417vm-test-run-hermes-remote> server # [    3.612909] systemd[1]: Stopped target Timer Units.1418vm-test-run-hermes-remote> server # [    3.613787] systemd[1]: dbus.socket: Deactivated successfully.1419vm-test-run-hermes-remote> server # [    3.614808] systemd[1]: Closed D-Bus System Message Bus Socket.1420vm-test-run-hermes-remote> server # [    3.615829] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.1421vm-test-run-hermes-remote> server # [    3.617097] systemd[1]: Stopped Find NixOS closure.1422vm-test-run-hermes-remote> server # [    3.618280] systemd[1]: Starting rw-sysroot-nix-store.service...1423vm-test-run-hermes-remote> server # [    3.619279] systemd[1]: systemd-sysctl.service: Deactivated successfully.1424vm-test-run-hermes-remote> server # [    3.620407] systemd[1]: Stopped Apply Kernel Variables.1425vm-test-run-hermes-remote> server # [    3.621315] systemd[1]: systemd-modules-load.service: Deactivated successfully.1426vm-test-run-hermes-remote> server # [    3.622525] systemd[1]: Stopped Load Kernel Modules.1427vm-test-run-hermes-remote> server # [    3.623551] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.1428vm-test-run-hermes-remote> server # [    3.624845] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.1429vm-test-run-hermes-remote> server # [    3.627268] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.1430vm-test-run-hermes-remote> server # [    3.628693] systemd[1]: Stopped Create System Files and Directories.1431vm-test-run-hermes-remote> server # [    3.629897] systemd[1]: Stopped target Local File Systems.1432vm-test-run-hermes-remote> server # [    3.630926] systemd[1]: Stopped target Preparation for Local File Systems.1433vm-test-run-hermes-remote> server # [    3.632189] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.1434vm-test-run-hermes-remote> server # [    3.633587] systemd[1]: Stopped Coldplug All udev Devices.1435vm-test-run-hermes-remote> server # [    3.634643] systemd[1]: Stopping Rule-based Manager for Device Events and Files...1436vm-test-run-hermes-remote> server # [    3.635996] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1437vm-test-run-hermes-remote> server # [    3.637542] systemd[1]: Stopped Virtual Console Setup.1438vm-test-run-hermes-remote> server # [    3.638545] systemd[1]: initrd-cleanup.service: Deactivated successfully.1439vm-test-run-hermes-remote> server # [    3.639833] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.1440vm-test-run-hermes-remote> server # [    3.640994] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1441vm-test-run-hermes-remote> server # [    3.642197] systemd[1]: Finished rw-sysroot-nix-store.service.1442vm-test-run-hermes-remote> server # [    3.643178] systemd[1]: systemd-udevd.service: Deactivated successfully.1443vm-test-run-hermes-remote> server # [    3.644271] systemd[1]: Stopped Rule-based Manager for Device Events and Files.1444vm-test-run-hermes-remote> server # [    3.645469] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.1445vm-test-run-hermes-remote> server # [    3.646660] systemd[1]: Closed udev Control Socket.1446vm-test-run-hermes-remote> server # [    3.647528] systemd[1]: Starting Cleanup udev Database...1447vm-test-run-hermes-remote> server # [    3.648457] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.1448vm-test-run-hermes-remote> server # [    3.649734] systemd[1]: Stopped Create Static Device Nodes in /dev.1449vm-test-run-hermes-remote> server # [    3.650829] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.1450vm-test-run-hermes-remote> server # [    3.652301] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.1451vm-test-run-hermes-remote> server # [    3.653504] systemd[1]: kmod-static-nodes.service: Deactivated successfully.1452vm-test-run-hermes-remote> server # [    3.654667] systemd[1]: Stopped Create List of Static Device Nodes.1453vm-test-run-hermes-remote> server # [    3.657811] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.1454vm-test-run-hermes-remote> server # [    3.659078] systemd[1]: Finished Cleanup udev Database.1455vm-test-run-hermes-remote> server # [    3.659962] systemd[1]: Reached target Switch Root.1456vm-test-run-hermes-remote> server # [    3.660800] systemd[1]: Starting NixOS Activation...1457vm-test-run-hermes-remote> server # [    3.716986] initrd-nixos-activation-start[239]: booting system configuration /nix/store/h9dxvmw5h2r3pwnqbvbaiys9ybc9yvrd-nixos-system-server-test1458vm-test-run-hermes-remote> client # [    3.668403] initrd-nixos-activation-start[231]: setting up /etc...1459vm-test-run-hermes-remote> server # [    3.739529] initrd-nixos-activation-start[239]: running activation script...1460vm-test-run-hermes-remote> client # [    3.749370] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.1461vm-test-run-hermes-remote> client # [    3.750716] systemd[1]: Finished NixOS Activation.1462vm-test-run-hermes-remote> client # [    3.751620] systemd[1]: Starting Switch Root...1463vm-test-run-hermes-remote> client # [    3.768082] systemd[1]: Switching root.1464vm-test-run-hermes-remote> client # [    3.979208] systemd-journald[73]: Received SIGTERM from PID 1 (systemd).1465vm-test-run-hermes-remote> server # [    3.903407] initrd-nixos-activation-start[262]: setting up /etc...1466vm-test-run-hermes-remote> client # [    4.042677] NET: Registered PF_VSOCK protocol family1467vm-test-run-hermes-remote> server # [    3.994805] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.1468vm-test-run-hermes-remote> server # [    3.996042] systemd[1]: Finished NixOS Activation.1469vm-test-run-hermes-remote> server # [    3.996877] systemd[1]: Starting Switch Root...1470vm-test-run-hermes-remote> server # [    4.014437] systemd[1]: Switching root.1471vm-test-run-hermes-remote> server # [    4.247120] systemd-journald[91]: Received SIGTERM from PID 1 (systemd).1472vm-test-run-hermes-remote> server # [    4.295864] NET: Registered PF_VSOCK protocol family1473vm-test-run-hermes-remote> client # [    4.404884] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)1474vm-test-run-hermes-remote> client # [    4.409323] systemd[1]: Detected virtualization kvm.1475vm-test-run-hermes-remote> client # [    4.410179] systemd[1]: Detected architecture x86-64.1476vm-test-run-hermes-remote> client # [    4.411077] systemd[1]: Detected first boot.1477vm-test-run-hermes-remote> client # [    4.412978] systemd[1]: Initializing machine ID from random generator.1478vm-test-run-hermes-remote> client # [    4.511887] systemd[1]: bpf-restrict-fs: LSM BPF program attached1479vm-test-run-hermes-remote> client # [    4.549784] systemd[1]: Applying preset policy.1480vm-test-run-hermes-remote> server # [    4.666299] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)1481vm-test-run-hermes-remote> server # [    4.671218] systemd[1]: Detected virtualization kvm.1482vm-test-run-hermes-remote> server # [    4.672182] systemd[1]: Detected architecture x86-64.1483vm-test-run-hermes-remote> server # [    4.673205] systemd[1]: Detected first boot.1484vm-test-run-hermes-remote> server # [    4.675150] systemd[1]: Initializing machine ID from random generator.1485vm-test-run-hermes-remote> client # [    4.685113] systemd[1]: Populated /etc with preset unit settings.1486vm-test-run-hermes-remote> server # [    4.764763] systemd[1]: bpf-restrict-fs: LSM BPF program attached1487vm-test-run-hermes-remote> server # [    4.789929] systemd[1]: Applying preset policy.1488vm-test-run-hermes-remote> client # [    4.861923] systemd[1]: initrd-switch-root.service: Deactivated successfully.1489vm-test-run-hermes-remote> client # [    4.863640] systemd[1]: Stopped initrd-switch-root.service.1490vm-test-run-hermes-remote> client # [    4.873752] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.1491vm-test-run-hermes-remote> client # [    4.875990] systemd[1]: Created slice Slice /system/getty.1492vm-test-run-hermes-remote> client # [    4.877516] systemd[1]: Created slice User and Session Slice.1493vm-test-run-hermes-remote> client # [    4.878651] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.1494vm-test-run-hermes-remote> server # [    4.940721] systemd[1]: Populated /etc with preset unit settings.1495vm-test-run-hermes-remote> client # [    4.880153] systemd[1]: Started Forward Password Requests to Wall Directory Watch.1496vm-test-run-hermes-remote> client # [    4.881494] systemd[1]: Expecting device /dev/hvc0...1497vm-test-run-hermes-remote> client # [    4.882424] systemd[1]: Expecting device /dev/ttyS0...1498vm-test-run-hermes-remote> client # [    4.883416] systemd[1]: Reached target Local Encrypted Volumes.1499vm-test-run-hermes-remote> client # [    4.884479] systemd[1]: Stopped target initrd-fs.target.1500vm-test-run-hermes-remote> client # [    4.885469] systemd[1]: Stopped target initrd-root-fs.target.1501vm-test-run-hermes-remote> client # [    4.886521] systemd[1]: Stopped target initrd-switch-root.target.1502vm-test-run-hermes-remote> client # [    4.887641] systemd[1]: Reached target Virtual Machines and Containers.1503vm-test-run-hermes-remote> client # [    4.888820] systemd[1]: Reached target Path Units.1504vm-test-run-hermes-remote> client # [    4.889739] systemd[1]: Reached target Remote File Systems.1505vm-test-run-hermes-remote> client # [    4.890779] systemd[1]: Reached target Slice Units.1506vm-test-run-hermes-remote> client # [    4.891724] systemd[1]: Reached target Swaps.1507vm-test-run-hermes-remote> client # [    4.893381] systemd[1]: Listening on Query the User Interactively for a Password.1508vm-test-run-hermes-remote> client # [    4.895784] systemd[1]: Listening on Process Core Dump Socket.1509vm-test-run-hermes-remote> client # [    4.897612] systemd[1]: Listening on Credential Encryption/Decryption.1510vm-test-run-hermes-remote> client # [    4.899616] systemd[1]: Listening on Factory Reset Management.1511vm-test-run-hermes-remote> client # [    4.900701] systemd[1]: Listening on Hostname Service Socket.1512vm-test-run-hermes-remote> client # [    4.903310] systemd[1]: Starting Journal Log Access Socket...1513vm-test-run-hermes-remote> client # [    4.904630] systemd[1]: Listening on Journal Audit Socket.1514vm-test-run-hermes-remote> client # [    4.906651] systemd[1]: Listening on Console Output Muting Service Socket.1515vm-test-run-hermes-remote> client # [    4.908080] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.1516vm-test-run-hermes-remote> client # [    4.909415] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os1517vm-test-run-hermes-remote> client # [    4.910908] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki1518vm-test-run-hermes-remote> client # [    4.914660] systemd[1]: Listening on Disk Repartitioning Service Socket.1519vm-test-run-hermes-remote> client # [    4.915826] systemd[1]: Listening on udev Control Socket.1520vm-test-run-hermes-remote> client # [    4.916844] systemd[1]: Listening on udev Varlink Socket.1521vm-test-run-hermes-remote> client # [    4.918846] systemd[1]: Mounting Huge Pages File System...1522vm-test-run-hermes-remote> client # [    4.920931] systemd[1]: Mounting POSIX Message Queue File System...1523vm-test-run-hermes-remote> client # [    4.924226] systemd[1]: Mounting Kernel Debug File System...1524vm-test-run-hermes-remote> client # [    4.926250] systemd[1]: Mounting Kernel Trace File System...1525vm-test-run-hermes-remote> client # [    4.928364] systemd[1]: Starting Create List of Static Device Nodes...1526vm-test-run-hermes-remote> client # [    4.932870] systemd[1]: Starting Load Kernel Module configfs...1527vm-test-run-hermes-remote> client # [    4.935214] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm1528vm-test-run-hermes-remote> client # [    4.937158] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore1529vm-test-run-hermes-remote> client # [    4.939197] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse1530vm-test-run-hermes-remote> client # [    4.942099] systemd[1]: Mounting FUSE Control File System...1531vm-test-run-hermes-remote> client # [    4.943084] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc671532vm-test-run-hermes-remote> client # [    4.953162] systemd[1]: Starting Journal Service...1533vm-test-run-hermes-remote> client # [    4.960372] systemd[1]: Starting Load Kernel Modules...1534vm-test-run-hermes-remote> client # [    4.966632] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...1535vm-test-run-hermes-remote> client # [    4.971287] systemd[1]: Starting Remount Root and Kernel File Systems...1536vm-test-run-hermes-remote> client # [    4.972374] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1537vm-test-run-hermes-remote> client # [    4.980317] systemd[1]: Starting Coldplug All udev Devices...1538vm-test-run-hermes-remote> client # [    4.983470] systemd[1]: Listening on Journal Log Access Socket.1539vm-test-run-hermes-remote> client # [    4.984877] systemd[1]: Mounted Huge Pages File System.1540vm-test-run-hermes-remote> client # [    4.985873] systemd[1]: Mounted POSIX Message Queue File System.1541vm-test-run-hermes-remote> client # [    4.987000] systemd[1]: Mounted Kernel Debug File System.1542vm-test-run-hermes-remote> client # [    4.988125] systemd[1]: Mounted Kernel Trace File System.1543vm-test-run-hermes-remote> client # [    4.989633] systemd[1]: Finished Create List of Static Device Nodes.1544vm-test-run-hermes-remote> client # [    4.991131] systemd[1]: modprobe@configfs.service: Deactivated successfully.1545vm-test-run-hermes-remote> client # [    4.993479] systemd[1]: Finished Load Kernel Module configfs.1546vm-test-run-hermes-remote> client # [    4.994714] systemd[1]: Mounted FUSE Control File System.1547vm-test-run-hermes-remote> client # [    4.998420] systemd[1]: Mounting Kernel Configuration File System...1548vm-test-run-hermes-remote> client # [    5.001469] systemd-journald[301]: Collecting audit messages is enabled.1549vm-test-run-hermes-remote> server # [    5.062478] systemd[1]: microvm@hermes-alice.service: Service uses a combination of Type=simple, ExecStartPost=, and credentials. This could lead to race conditions. Continuing.1550vm-test-run-hermes-remote> client # [    5.003127] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...1551vm-test-run-hermes-remote> client # [    5.008561] loop: module loaded1552vm-test-run-hermes-remote> client # [    5.010055] EXT4-fs (vda): re-mounted cb5de15d-2526-4cd2-9da6-79ba23a0e9c1.1553vm-test-run-hermes-remote> client # [    5.012909] systemd[1]: Finished Load Kernel Modules.1554vm-test-run-hermes-remote> client # [    5.018437] systemd[1]: Starting Firewall...1555vm-test-run-hermes-remote> client # [    5.022266] systemd[1]: Starting Apply Kernel Variables...1556vm-test-run-hermes-remote> client # [    4.847183] systemd[1]: Queued start job for [    5.023375] systemd[1]: Started Journal Service.1557vm-test-run-hermes-remote> client # default target Multi-User System.1558vm-test-run-hermes-remote> client # [    4.849495] systemd[1]: systemd-journald.service: Deactivated successfully.1559vm-test-run-hermes-remote> client # [    4.851220] systemd-modules-load[302]: Using 2 probe threads1560vm-test-run-hermes-remote> client # [    4.853368] systemd-modules-load[302]: Inserted module 'loop'1561vm-test-run-hermes-remote> client # [    4.856586] systemd[1]: Finished Remount Root and Kernel File Systems.1562vm-test-run-hermes-remote> client # [    4.867591] systemd[1]: Listening on Disk Image Download Service Socket.1563vm-test-run-hermes-remote> client # [    4.869264] systemd[1]: Starting Flush Journal to Persistent Storage...1564vm-test-run-hermes-remote> client # [    4.870932] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore1565vm-test-run-hermes-remote> client # [    4.875437] systemd-oomd[303]: No swap; memory pressure usage will be degraded1566vm-test-run-hermes-remote> client # [    4.877181] systemd[1]: Starting Load/Save OS Random Seed...1567vm-test-run-hermes-remote> client # [    4.879149] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1568vm-test-run-hermes-remote> client # [    4.882262] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.1569vm-test-run-hermes-remote> client # [    5.068975] systemd-journald[301]: Received client request to flush runtime journal.1570vm-test-run-hermes-remote> server # [    5.138107] systemd[1]: initrd-switch-root.service: Deactivated successfully.1571vm-test-run-hermes-remote> server # [    5.139696] systemd[1]: Stopped initrd-switch-root.service.1572vm-test-run-hermes-remote> server # [    5.141739] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.1573vm-test-run-hermes-remote> server # [    5.143925] systemd[1]: Created slice Slice /system/getty.1574vm-test-run-hermes-remote> server # [    5.145318] systemd[1]: Created slice Slice /system/microvm.1575vm-test-run-hermes-remote> server # [    5.146847] systemd[1]: Created slice Slice /system/microvm-macvtap-interfaces.1576vm-test-run-hermes-remote> server # [    5.148490] systemd[1]: Created slice Slice /system/microvm-pci-devices.1577vm-test-run-hermes-remote> server # [    5.150148] systemd[1]: Created slice Slice /system/microvm-set-booted.1578vm-test-run-hermes-remote> server # [    5.151718] systemd[1]: Created slice Slice /system/microvm-tap-interfaces.1579vm-test-run-hermes-remote> server # [    5.153276] systemd[1]: Created slice Slice /system/microvm-virtiofsd.1580vm-test-run-hermes-remote> server # [    5.154789] systemd[1]: Created slice User and Session Slice.1581vm-test-run-hermes-remote> server # [    5.155816] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.1582vm-test-run-hermes-remote> server # [    5.157154] systemd[1]: Started Forward Password Requests to Wall Directory Watch.1583vm-test-run-hermes-remote> server # [    5.158369] systemd[1]: Expecting device /dev/hvc0...1584vm-test-run-hermes-remote> server # [    5.159219] systemd[1]: Expecting device /dev/ttyS0...1585vm-test-run-hermes-remote> server # [    5.160117] systemd[1]: Reached target Local Encrypted Volumes.1586vm-test-run-hermes-remote> server # [    5.161087] systemd[1]: Stopped target initrd-fs.target.1587vm-test-run-hermes-remote> server # [    5.162006] systemd[1]: Stopped target initrd-root-fs.target.1588vm-test-run-hermes-remote> server # [    5.162964] systemd[1]: Stopped target initrd-switch-root.target.1589vm-test-run-hermes-remote> server # [    5.163998] systemd[1]: Reached target Virtual Machines and Containers.1590vm-test-run-hermes-remote> server # [    5.165084] systemd[1]: Reached target Remote File Systems.1591vm-test-run-hermes-remote> server # [    5.166039] systemd[1]: Reached target Slice Units.1592vm-test-run-hermes-remote> server # [    5.166922] systemd[1]: Reached target Swaps.1593vm-test-run-hermes-remote> server # [    5.168751] systemd[1]: Listening on Query the User Interactively for a Password.1594vm-test-run-hermes-remote> server # [    5.171280] systemd[1]: Listening on Process Core Dump Socket.1595vm-test-run-hermes-remote> server # [    5.173196] systemd[1]: Listening on Credential Encryption/Decryption.1596vm-test-run-hermes-remote> server # [    5.175139] systemd[1]: Listening on Factory Reset Management.1597vm-test-run-hermes-remote> server # [    5.176238] systemd[1]: Listening on Hostname Service Socket.1598vm-test-run-hermes-remote> server # [    5.178857] systemd[1]: Starting Journal Log Access Socket...1599vm-test-run-hermes-remote> server # [    5.180180] systemd[1]: Listening on Journal Audit Socket.1600vm-test-run-hermes-remote> server # [    5.182115] systemd[1]: Listening on Console Output Muting Service Socket.1601vm-test-run-hermes-remote> server # [    5.183376] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.1602vm-test-run-hermes-remote> server # [    5.184650] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os1603vm-test-run-hermes-remote> server # [    5.186145] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki1604vm-test-run-hermes-remote> server # [    5.190149] systemd[1]: Listening on Disk Repartitioning Service Socket.1605vm-test-run-hermes-remote> server # [    5.191347] systemd[1]: Listening on udev Control Socket.1606vm-test-run-hermes-remote> server # [    5.192509] systemd[1]: Listening on udev Varlink Socket.1607vm-test-run-hermes-remote> server # [    5.194664] systemd[1]: Mounting Huge Pages File System...1608vm-test-run-hermes-remote> server # [    5.197043] systemd[1]: Mounting POSIX Message Queue File System...1609vm-test-run-hermes-remote> server # [    5.199104] systemd[1]: Mounting Kernel Debug File System...1610vm-test-run-hermes-remote> server # [    5.200961] systemd[1]: Mounting Kernel Trace File System...1611vm-test-run-hermes-remote> server # [    5.203974] systemd[1]: Starting Create List of Static Device Nodes...1612vm-test-run-hermes-remote> server # [    5.206275] systemd[1]: Starting Load Kernel Module configfs...1613vm-test-run-hermes-remote> server # [    5.208189] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm1614vm-test-run-hermes-remote> server # [    5.210377] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore1615vm-test-run-hermes-remote> client # [    4.974720] systemd[1]: Finished Load/Save OS Random Seed.1616vm-test-run-hermes-remote> server # [    5.212282] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse1617vm-test-run-hermes-remote> client # [    4.976085] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.1618vm-test-run-hermes-remote> client # [    4.977234] systemd[1]: Mounted Kernel Configuration File System.1619vm-test-run-hermes-remote> client # [    4.978234] systemd[1]: Reached target First Boot Complete.1620vm-test-run-hermes-remote> client # [    4.979147] systemd[1]: Starting Create Static Device Nodes in /dev...1621vm-test-run-hermes-remote> server # [    5.216363] systemd[1]: Mounting FUSE Control File System...1622vm-test-run-hermes-remote> client # [    4.982691] systemd[1]: Finished Flush Journal to Persistent Storage.1623vm-test-run-hermes-remote> server # [    5.218234] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc671624vm-test-run-hermes-remote> server # [    5.222794] systemd[1]: Starting Journal Service...1625vm-test-run-hermes-remote> server # [    5.224670] systemd[1]: Starting Load Kernel Modules...1626vm-test-run-hermes-remote> client # [    4.990278] systemd[1]: Finished Apply Kernel Variables.1627vm-test-run-hermes-remote> client # [    4.991358] systemd[1]: Finished Create Static Device Nodes in /dev.1628vm-test-run-hermes-remote> server # [    5.228826] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...1629vm-test-run-hermes-remote> client # [    4.992480] systemd[1]: Reached target Preparation for Local File Systems.1630vm-test-run-hermes-remote> client # [    4.993686] systemd[1]: Starting Rule-based Manager for Device Events and Files...1631vm-test-run-hermes-remote> server # [    5.230925] systemd[1]: Starting Remount Root and Kernel File Systems...1632vm-test-run-hermes-remote> server # [    5.232059] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1633vm-test-run-hermes-remote> server # [    5.234501] systemd[1]: Starting Coldplug All udev Devices...1634vm-test-run-hermes-remote> server # [    5.237052] systemd[1]: Listening on Journal Log Access Socket.1635vm-test-run-hermes-remote> server # [    5.238187] systemd[1]: Mounted Huge Pages File System.1636vm-test-run-hermes-remote> server # [    5.239207] systemd[1]: Mounted POSIX Message Queue File System.1637vm-test-run-hermes-remote> server # [    5.240335] systemd[1]: Mounted Kernel Debug File System.1638vm-test-run-hermes-remote> server # [    5.241361] systemd[1]: Mounted Kernel Trace File System.1639vm-test-run-hermes-remote> server # [    5.242895] systemd[1]: Finished Create List of Static Device Nodes.1640vm-test-run-hermes-remote> server # [    5.244208] systemd[1]: modprobe@configfs.service: Deactivated successfully.1641vm-test-run-hermes-remote> server # [    5.244364] systemd-journald[332]: Collecting audit messages is enabled.1642vm-test-run-hermes-remote> server # [    5.244949] systemd[1]: Finished Load Kernel Module configfs.1643vm-test-run-hermes-remote> server # [    5.247651] systemd[1]: Mounted FUSE Control File System.1644vm-test-run-hermes-remote> server # [    5.252341] systemd[1]: Mounting Kernel Configuration File System...1645vm-test-run-hermes-remote> server # [    5.255076] loop: module loaded1646vm-test-run-hermes-remote> client # [    5.020989] systemd[1]: Finished Coldplug All udev Devices.1647vm-test-run-hermes-remote> server # [    5.259696] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...1648vm-test-run-hermes-remote> client # [    5.023185] systemd-udevd[340]: Using default interface naming scheme 'v261'.1649vm-test-run-hermes-remote> server # [    5.261337] EXT4-fs (vda): re-mounted 9222e41e-1ddf-4966-a94e-52574bb11a84.1650vm-test-run-hermes-remote> server # [    5.263253] tun: Universal TUN/TAP device driver, 1.61651vm-test-run-hermes-remote> server # [    5.080326] systemd[1]: Queued start job for default target Multi-User System.1652vm-test-run-hermes-remote> server # [    5.082710] systemd[1]: systemd-journald.service: Deactivated successfully.1653vm-test-run-hermes-remote> server # [    5.269393] systemd[1]: Started Journal Service.1654vm-test-run-hermes-remote> server # [    5.084297] systemd-modules-load[333]: Using 4 probe threads1655vm-test-run-hermes-remote> server # [    5.085870] systemd-modules-load[333]: Inserted module 'tap'1656vm-test-run-hermes-remote> server # [    5.087431] systemd-modules-load[333]: Inserted module 'loop'1657vm-test-run-hermes-remote> server # [    5.088607] systemd-modules-load[333]: Inserted module 'vhost_vsock'1658vm-test-run-hermes-remote> server # [    5.090285] systemd-modules-load[333]: Inserted module 'vhost_net'1659vm-test-run-hermes-remote> server # [    5.092657] systemd[1]: Finished Load Kernel Modules.1660vm-test-run-hermes-remote> server # [    5.094213] systemd[1]: Finished Remount Root and Kernel File Systems.1661vm-test-run-hermes-remote> server # [    5.098684] systemd[1]: Listening on Disk Image Download Service Socket.1662vm-test-run-hermes-remote> server # [    5.104831] systemd[1]: Starting Firewall...1663vm-test-run-hermes-remote> client # [    5.057724] systemd[1]: Started Rule-based Manager for Device Events and Files.1664vm-test-run-hermes-remote> server # [    5.110287] systemd[1]: Starting Flush Journal to Persistent Storage...1665vm-test-run-hermes-remote> server # [    5.111513] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore1666vm-test-run-hermes-remote> server # [    5.113493] systemd-oomd[335]: No swap; memory pressure usage will be degraded1667vm-test-run-hermes-remote> server # [    5.115527] systemd[1]: Starting Load/Save OS Random Seed...1668vm-test-run-hermes-remote> server # [    5.118166] systemd[1]: Starting Apply Kernel Variables...1669vm-test-run-hermes-remote> server # [    5.119235] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1670vm-test-run-hermes-remote> server # [    5.120838] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.1671vm-test-run-hermes-remote> server # [    5.122145] systemd[1]: Mounted Kernel Configuration File System.1672vm-test-run-hermes-remote> server # [    5.312157] systemd-journald[332]: Received client request to flush runtime journal.1673vm-test-run-hermes-remote> server # [    5.184268] systemd[1]: Finished Load/Save OS Random Seed.1674vm-test-run-hermes-remote> server # [    5.185524] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.1675vm-test-run-hermes-remote> server # [    5.187710] systemd[1]: Reached target First Boot Complete.1676vm-test-run-hermes-remote> server # [    5.188731] systemd[1]: Starting Create Static Device Nodes in /dev...1677vm-test-run-hermes-remote> server # [    5.189776] systemd[1]: Finished Apply Kernel Variables.1678vm-test-run-hermes-remote> server # [    5.190670] systemd[1]: Finished Create Static Device Nodes in /dev.1679vm-test-run-hermes-remote> server # [    5.191704] systemd[1]: Reached target Preparation for Local File Systems.1680vm-test-run-hermes-remote> server # [    5.192787] systemd[1]: Starting Rule-based Manager for Device Events and Files...1681vm-test-run-hermes-remote> server # [    5.194054] systemd[1]: Finished Flush Journal to Persistent Storage.1682vm-test-run-hermes-remote> server # [    5.195131] systemd[1]: Finished Coldplug All udev Devices.1683vm-test-run-hermes-remote> client # [    5.150537] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse1684vm-test-run-hermes-remote> server # [    5.207036] systemd-udevd[367]: Using default interface naming scheme 'v261'.1685vm-test-run-hermes-remote> server # [    5.235917] systemd[1]: Started Rule-based Manager for Device Events and Files.1686vm-test-run-hermes-remote> client # [    5.188081] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.1687vm-test-run-hermes-remote> client # [    5.202176] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.1688vm-test-run-hermes-remote> client # [    5.213819] (udev-worker)[386]: Network interface NamePolicy= disabled on kernel command line.1689vm-test-run-hermes-remote> client # [    5.215973] (udev-worker)[393]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.1690vm-test-run-hermes-remote> client # [    5.218415] (udev-worker)[393]: Network interface NamePolicy= disabled on kernel command line.1691vm-test-run-hermes-remote> client # [    5.262472] systemd[1]: Condition check resulted in Virtio network device being skipped.1692vm-test-run-hermes-remote> client # [    5.264210] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore1693vm-test-run-hermes-remote> client # [    5.265877] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc671694vm-test-run-hermes-remote> server # [    5.318175] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse1695vm-test-run-hermes-remote> client # [    5.268325] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore1696vm-test-run-hermes-remote> client # [    5.270210] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1697vm-test-run-hermes-remote> client # [    5.271706] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1698vm-test-run-hermes-remote> server # [    5.338062] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.1699vm-test-run-hermes-remote> server # [    5.364848] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.1700vm-test-run-hermes-remote> server # [    5.373481] (udev-worker)[433]: Network interface NamePolicy= disabled on kernel command line.1701vm-test-run-hermes-remote> server # [    5.375228] (udev-worker)[426]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.1702vm-test-run-hermes-remote> server # [    5.377773] (udev-worker)[426]: Network interface NamePolicy= disabled on kernel command line.1703vm-test-run-hermes-remote> server # [    5.581993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input31704vm-test-run-hermes-remote> client # [    5.523542] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input31705vm-test-run-hermes-remote> server # [    5.400743] systemd[1]: Condition check resulted in Virtio network device being skipped.1706vm-test-run-hermes-remote> client # [    5.526323] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console1707vm-test-run-hermes-remote> server # [    5.402381] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore1708vm-test-run-hermes-remote> server # [    5.404395] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc671709vm-test-run-hermes-remote> server # [    5.407220] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore1710vm-test-run-hermes-remote> server # [    5.409347] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1711vm-test-run-hermes-remote> server # [    5.410959] systemd[1]: TPM SRK Setup skipped, unmet condition check Conditio[    5.597054] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:06.0/virtio4/input/input41712vm-test-run-hermes-remote> server # nSecurity=measured-os1713vm-test-run-hermes-remote> client # [    5.527601] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:06.0/virtio4/input/input41714vm-test-run-hermes-remote> client # [    5.531238] ACPI: button: Power Button [PWRF]1715vm-test-run-hermes-remote> client # [    5.537480] Console: switching to colour dummy device 80x251716vm-test-run-hermes-remote> client # [    5.539945] [drm] Found bochs VGA, ID 0xb0c5.1717vm-test-run-hermes-remote> client # [    5.539947] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.1718vm-test-run-hermes-remote> client # [    5.542675] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic1719vm-test-run-hermes-remote> client # [    5.543899] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 01720vm-test-run-hermes-remote> server # [    5.608692] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console1721vm-test-run-hermes-remote> client # [    5.550824] mousedev: PS/2 mouse device common for all mice1722vm-test-run-hermes-remote> server # [    5.612852] ACPI: button: Power Button [PWRF]1723vm-test-run-hermes-remote> server # [    5.619250] Console: switching to colour dummy device 80x251724vm-test-run-hermes-remote> server # [    5.620617] [drm] Found bochs VGA, ID 0xb0c5.1725vm-test-run-hermes-remote> server # [    5.621134] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.1726vm-test-run-hermes-remote> server # [    5.625407] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic1727vm-test-run-hermes-remote> server # [    5.626264] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 01728vm-test-run-hermes-remote> client # [    5.562109] rtc_cmos PNP0B00:00: RTC can wake from S41729vm-test-run-hermes-remote> client # [    5.565270] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized1730vm-test-run-hermes-remote> client # [    5.566183] rtc_cmos PNP0B00:00: registered as rtc01731vm-test-run-hermes-remote> client # [    5.566281] rtc_cmos PNP0B00:00: setting system clock to 2026-09-25T16:36:03 UTC (1790354163)1732vm-test-run-hermes-remote> client # [    5.566380] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs1733vm-test-run-hermes-remote> client # [    5.566730] Console: switching to colour frame buffer device 160x501734vm-test-run-hermes-remote> client # [    5.572377] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device1735vm-test-run-hermes-remote> server # [    5.640167] Console: switching to colour frame buffer device 160x501736vm-test-run-hermes-remote> client # [    5.404645] systemd[1]: Finished Firewall.1737vm-test-run-hermes-remote> server # [    5.642319] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device1738vm-test-run-hermes-remote> server # [    5.645495] rtc_cmos PNP0B00:00: RTC can wake from S41739vm-test-run-hermes-remote> server # [    5.647074] parport_pc 00:02: reported by Plug and Play ACPI1740vm-test-run-hermes-remote> server # [    5.647924] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]1741vm-test-run-hermes-remote> server # [    5.648268] mousedev: PS/2 mouse device common for all mice1742vm-test-run-hermes-remote> client # [    5.589934] parport_pc 00:02: reported by Plug and Play ACPI1743vm-test-run-hermes-remote> server # [    5.654777] rtc_cmos PNP0B00:00: registered as rtc01744vm-test-run-hermes-remote> server # [    5.654951] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized1745vm-test-run-hermes-remote> server # [    5.655529] rtc_cmos PNP0B00:00: setting system clock to 2026-09-25T16:36:03 UTC (1790354163)1746vm-test-run-hermes-remote> server # [    5.657226] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs1747vm-test-run-hermes-remote> client # [    5.600420] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]1748vm-test-run-hermes-remote> client # [    5.606055] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input61749vm-test-run-hermes-remote> client # [    5.608972] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt1750vm-test-run-hermes-remote> client # [    5.610788] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input51751vm-test-run-hermes-remote> client # [    5.612057] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD1752vm-test-run-hermes-remote> server # [    5.675593] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input61753vm-test-run-hermes-remote> server # [    5.677049] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input51754vm-test-run-hermes-remote> client # [    5.477649] systemd[1]: Starting Virtual Console Setup...1755vm-test-run-hermes-remote> client # [    5.487189] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1756vm-test-run-hermes-remote> server # [    5.728437] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt1757vm-test-run-hermes-remote> client # [    5.491722] systemd[1]: Stopped Virtual Console Setup.1758vm-test-run-hermes-remote> client # [    5.493342] systemd[1]: Starting Virtual Console Setup...1759vm-test-run-hermes-remote> server # [    5.551289] systemd[1]: Starting Virtual Console Setup...1760vm-test-run-hermes-remote> server # [    5.743980] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD1761vm-test-run-hermes-remote> server # [    5.752650] ppdev: user-space parallel port driver1762vm-test-run-hermes-remote> client # [    5.692066] ppdev: user-space parallel port driver1763vm-test-run-hermes-remote> client # [    5.694161] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)1764vm-test-run-hermes-remote> server # [    5.570676] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1765vm-test-run-hermes-remote> server # [    5.575424] systemd[1]: Stopped Virtual Console Setup.1766vm-test-run-hermes-remote> client # [    5.529952] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1767vm-test-run-hermes-remote> client # [    5.531493] systemd[1]: Stopped Virtual Console Setup.1768vm-test-run-hermes-remote> client # [    5.710659] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)1769vm-test-run-hermes-remote> client # [    5.535081] systemd[1]: Starting Virtual Console Setup...1770vm-test-run-hermes-remote> server # [    5.591563] systemd[1]: Starting Virtual Console Setup...1771vm-test-run-hermes-remote> server # [    5.787439] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)1772vm-test-run-hermes-remote> server # [    5.603229] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1773vm-test-run-hermes-remote> server # [    5.790115] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)1774vm-test-run-hermes-remote> server # [    5.606353] systemd[1]: Stopped Virtual Console Setup.1775vm-test-run-hermes-remote> server # [    5.607485] systemd[1]: Starting Virtual Console Setup...1776vm-test-run-hermes-remote> server # [    5.794077] kvm_amd: TSC scaling supported1777vm-test-run-hermes-remote> server # [    5.794665] kvm_amd: Nested Virtualization enabled1778vm-test-run-hermes-remote> server # [    5.795245] kvm_amd: Nested Paging enabled1779vm-test-run-hermes-remote> server # [    5.795950] kvm_amd: LBR virtualization supported1780vm-test-run-hermes-remote> server # [    5.796529] kvm_amd: Virtual GIF supported1781vm-test-run-hermes-remote> server # [    5.797388] kvm_amd: Virtual NMI enabled1782vm-test-run-hermes-remote> client # [    5.772779] kvm_amd: TSC scaling supported1783vm-test-run-hermes-remote> client # [    5.773364] kvm_amd: Nested Virtualization enabled1784vm-test-run-hermes-remote> client # [    5.773952] kvm_amd: Nested Paging enabled1785vm-test-run-hermes-remote> client # [    5.774528] kvm_amd: LBR virtualization supported1786vm-test-run-hermes-remote> client # [    5.775190] kvm_amd: Virtual GIF supported1787vm-test-run-hermes-remote> client # [    5.775710] kvm_amd: Virtual NMI enabled1788vm-test-run-hermes-remote> server # [    5.864782] EDAC MC: Ver: 3.0.01789vm-test-run-hermes-remote> server # [    5.688385] systemd[1]: Finished Firewall.1790vm-test-run-hermes-remote> client # [    5.814044] EDAC MC: Ver: 3.0.01791vm-test-run-hermes-remote> client # [    5.687282] systemd[1]: Mounting /run/wrappers...1792vm-test-run-hermes-remote> server # [    5.750854] systemd-vconsole-setup[492]: Configuration of first virtual console was skipped, ignoring remaining ones.1793vm-test-run-hermes-remote> server # [    5.753288] systemd[1]: Finished Virtual Console Setup.1794vm-test-run-hermes-remote> client # [    5.703325] systemd[1]: Mounted /run/wrappers.1795vm-test-run-hermes-remote> client # [    5.704528] systemd[1]: Reached target Local File Systems.1796vm-test-run-hermes-remote> client # [    5.706307] systemd[1]: Listening on Boot Loader Control Service Socket.1797vm-test-run-hermes-remote> client # [    5.708993] systemd[1]: Starting register-nix-paths.service...1798vm-test-run-hermes-remote> client # [    5.710955] systemd[1]: Starting Create SUID/SGID Wrappers...1799vm-test-run-hermes-remote> client # [    5.711936] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.1800vm-test-run-hermes-remote> client # [    5.713451] systemd[1]: Starting Save Transient machine-id to Disk...1801vm-test-run-hermes-remote> client # [    5.715482] systemd[1]: Starting Create System Files and Directories...1802vm-test-run-hermes-remote> client # [    5.733710] systemd-vconsole-setup[464]: Configuration of first virtual console was skipped, ignoring remaining ones.1803vm-test-run-hermes-remote> client # [    5.737228] systemd[1]: Finished Virtual Console Setup.1804vm-test-run-hermes-remote> client # [    5.756694] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.1805vm-test-run-hermes-remote> client # [    5.758110] systemd[1]: Finished Create System Files and Directories.1806vm-test-run-hermes-remote> client # [    5.760107] systemd[1]: Starting Rebuild Journal Catalog...1807vm-test-run-hermes-remote> client # [    5.761760] systemd[1]: Starting Record System Boot/Shutdown in UTMP...1808vm-test-run-hermes-remote> client # [    5.763283] systemd[1]: Finished Save Transient machine-id to Disk.1809vm-test-run-hermes-remote> client # [    5.787501] systemd[1]: Finished Record System Boot/Shutdown in UTMP.1810vm-test-run-hermes-remote> client # [    5.797152] systemd[1]: Finished Rebuild Journal Catalog.1811vm-test-run-hermes-remote> client # [    5.798441] systemd[1]: Starting Update is Completed...1812vm-test-run-hermes-remote> client # [    5.820115] systemd[1]: Finished Update is Completed.1813vm-test-run-hermes-remote> server # [    5.954582] systemd[1]: Mounting /run/wrappers...1814vm-test-run-hermes-remote> server # [    5.972199] systemd[1]: Mounted /run/wrappers.1815vm-test-run-hermes-remote> server # [    5.973412] systemd[1]: Reached target Local File Systems.1816vm-test-run-hermes-remote> server # [    5.975312] systemd[1]: Listening on Boot Loader Control Service Socket.1817vm-test-run-hermes-remote> server # [    5.977382] systemd[1]: Starting register-nix-paths.service...1818vm-test-run-hermes-remote> server # [    5.979170] systemd[1]: Starting Create SUID/SGID Wrappers...1819vm-test-run-hermes-remote> server # [    5.980188] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.1820vm-test-run-hermes-remote> server # [    5.985965] systemd[1]: Starting Save Transient machine-id to Disk...1821vm-test-run-hermes-remote> server # [    5.987449] systemd[1]: Starting Create System Files and Directories...1822vm-test-run-hermes-remote> server # [    6.004178] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.1823vm-test-run-hermes-remote> server # [    6.005599] systemd-tmpfiles[516]: /etc/tmpfiles.d/10-microvm.conf:1: Duplicate line for path "/home/alice/hermes", ignoring.1824vm-test-run-hermes-remote> server # [    6.007653] systemd-tmpfiles[516]: /etc/tmpfiles.d/10-microvm.conf:2: Duplicate line for path "/var/lib/hermes-microvm/alice/guest", ignoring.1825vm-test-run-hermes-remote> server # [    6.009825] systemd-tmpfiles[516]: /etc/tmpfiles.d/10-microvm.conf:3: Duplicate line for path "/var/lib/hermes-microvm/alice/state-vault/state", ignoring.1826vm-test-run-hermes-remote> server # [    6.012119] systemd[1]: Finished Save Transient machine-id to Disk.1827vm-test-run-hermes-remote> server # [    6.018655] systemd[1]: Finished Create System Files and Directories.1828vm-test-run-hermes-remote> server # [    6.020625] systemd[1]: Starting Rebuild Journal Catalog...1829vm-test-run-hermes-remote> server # [    6.022524] systemd[1]: Starting Record System Boot/Shutdown in UTMP...1830vm-test-run-hermes-remote> client # [    5.970953] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.1831vm-test-run-hermes-remote> client # [    5.972994] systemd[1]: Finished Create SUID/SGID Wrappers.1832vm-test-run-hermes-remote> server # [    6.039066] systemd[1]: Finished Record System Boot/Shutdown in UTMP.1833vm-test-run-hermes-remote> server # [    6.047914] systemd[1]: Finished Rebuild Journal Catalog.1834vm-test-run-hermes-remote> server # [    6.049329] systemd[1]: Starting Update is Completed...1835vm-test-run-hermes-remote> server # [    6.064237] systemd[1]: Finished Update is Completed.1836vm-test-run-hermes-remote> client # [    6.037316] systemd[1]: Finished register-nix-paths.service.1837vm-test-run-hermes-remote> client # [    6.038637] systemd[1]: Reached target System Initialization.1838vm-test-run-hermes-remote> client # [    6.039828] systemd[1]: Started Discard unused filesystem blocks once a week.1839vm-test-run-hermes-remote> client # [    6.040991] systemd[1]: Started Daily Cleanup of Temporary Directories.1840vm-test-run-hermes-remote> client # [    6.042143] systemd[1]: Reached target Timer Units.1841vm-test-run-hermes-remote> client # [    6.043034] systemd[1]: Listening on D-Bus System Message Bus Socket.1842vm-test-run-hermes-remote> client # [    6.044218] systemd[1]: Listening on Nix Daemon Socket.1843vm-test-run-hermes-remote> client # [    6.045198] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.1844vm-test-run-hermes-remote> client # [    6.046557] systemd[1]: Reached target Socket Units.1845vm-test-run-hermes-remote> client # [    6.047395] systemd[1]: Reached target Basic System.1846vm-test-run-hermes-remote> client # [    6.050066] systemd[1]: Started backdoor.service.1847vm-test-run-hermes-remote> client # [    6.050992] systemd[1]: Starting Import lastlog data into lastlog2 database...1848vm-test-run-hermes-remote> client # [    6.054498] systemd[1]: Starting Name Service Cache Daemon (nsncd)...1849vm-test-run-hermes-remote> client # [    6.059939] systemd[1]: Starting Post-Boot Actions...1850vm-test-run-hermes-remote> client # [    6.063584] systemd[1]: Started Reset console on configuration changes.1851vm-test-run-hermes-remote> client # [    6.069051] systemd[1]: Starting resolvconf update...1852vm-test-run-hermes-remote> client # [    6.078322] systemd[1]: Starting D-Bus System Message Bus...1853vm-test-run-hermes-remote> server # [    6.135506] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.1854vm-test-run-hermes-remote> server # [    6.136792] systemd[1]: Finished Create SUID/SGID Wrappers.1855vm-test-run-hermes-remote> client # [    6.086725] systemd[1]: Finished Post-Boot Actions.1856vm-test-run-hermes-remote> client # [    6.090977] systemd[1]: Started Name Service Cache Daemon (nsncd).1857vm-test-run-hermes-remote> client # [    6.092320] systemd[1]: Reached target Host and Network Name Lookups.1858vm-test-run-hermes-remote> client # [    6.094610] nsncd[544]: Sep 25 16:36:04.200 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"1859vm-test-run-hermes-remote> client # [    6.097657] systemd[1]: Reached target User and Group Name Lookups.1860vm-test-run-hermes-remote> client # [    6.099702] systemd[1]: Starting User Login Management...1861vm-test-run-hermes-remote> client # connecting to host...1862vm-test-run-hermes-remote> client # [    6.116228] systemd[1]: Finished Import lastlog data into lastlog2 database.1863vm-test-run-hermes-remote> client # [    6.137927] systemd-logind[563]: New seat seat0.1864vm-test-run-hermes-remote> client # [    6.140750] systemd-logind[563]: Watching system buttons on /dev/input/event2 (Power Button)1865vm-test-run-hermes-remote> client # [    6.143317] systemd-logind[563]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)1866vm-test-run-hermes-remote> client # [    6.144773] systemd-logind[563]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)1867vm-test-run-hermes-remote> client # [    6.147269] systemd[1]: Started User Login Management.1868vm-test-run-hermes-remote> client # [    6.150281] systemd[1]: Starting linger-users.service...1869vm-test-run-hermes-remote> client # [    6.153958] dbus-broker-launch[549]: Looking up NSS user entry for 'systemd-timesync'...1870vm-test-run-hermes-remote> client # [    6.157638] dbus-broker-launch[549]: NSS returned no entry for 'systemd-timesync'1871vm-test-run-hermes-remote> client # [    6.159475] dbus-broker-launch[549]: Invalid user-name in /nix/store/ba4rgx4ly8my5snvkmdbh74j71z5ld79-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"1872vm-test-run-hermes-remote> client # [    6.170073] systemd[1]: Started D-Bus System Message Bus.1873vm-test-run-hermes-remote> server # [    6.221869] systemd[1]: Finished register-nix-paths.service.1874vm-test-run-hermes-remote> server # [    6.222923] systemd[1]: Reached target System Initialization.1875vm-test-run-hermes-remote> server # [    6.223913] systemd[1]: Started hermes-microvm-timezone.path.1876vm-test-run-hermes-remote> server # [    6.224902] systemd[1]: Started Discard unused filesystem blocks once a week.1877vm-test-run-hermes-remote> server # [    6.226092] systemd[1]: Started Daily Cleanup of Temporary Directories.1878vm-test-run-hermes-remote> server # [    6.227188] systemd[1]: Reached target Path Units.1879vm-test-run-hermes-remote> server # [    6.228055] systemd[1]: Reached target Timer Units.1880vm-test-run-hermes-remote> server # [    6.228888] systemd[1]: Listening on D-Bus System Message Bus Socket.1881vm-test-run-hermes-remote> client # [    6.178737] dbus-broker-launch[549]: Ready1882vm-test-run-hermes-remote> server # [    6.231503] systemd[1]: Listening on dashboard forward socket for alice.1883vm-test-run-hermes-remote> server # [    6.232595] systemd[1]: Listening on Nix Daemon Socket.1884vm-test-run-hermes-remote> server # [    6.233480] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).1885vm-test-run-hermes-remote> server # [    6.234872] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.1886vm-test-run-hermes-remote> server # [    6.236205] systemd[1]: Reached target Socket Units.1887vm-test-run-hermes-remote> server # [    6.237065] systemd[1]: Reached target Basic System.1888vm-test-run-hermes-remote> server # [    6.237890] systemd[1]: Started backdoor.service.1889vm-test-run-hermes-remote> server # [    6.238725] systemd[1]: Started Enable Kernel Same-Page Merging.1890vm-test-run-hermes-remote> server # [    6.239708] systemd[1]: Starting Owner-match loopback firewall for hermes microvms...1891vm-test-run-hermes-remote> server # [    6.241042] systemd[1]: Starting Install MicroVM 'hermes-alice'...1892vm-test-run-hermes-remote> client # [    6.190365] systemd[1]: Created slice Slice /user/1000.1893vm-test-run-hermes-remote> server # [    6.242097] systemd[1]: Starting Import lastlog data into lastlog2 database...1894vm-test-run-hermes-remote> client # [    6.191978] systemd[1]: Starting User Runtime Directory /run/user/1000...1895vm-test-run-hermes-remote> client # [    6.197516] systemd[1]: linger-users.service: Deactivated successfully.1896vm-test-run-hermes-remote> client # [    6.199780] systemd[1]: Finished linger-users.service.1897vm-test-run-hermes-remote> client # [    6.204087] systemd[1]: Stopped target Host and Network Name Lookups.1898vm-test-run-hermes-remote> server # [    6.255746] systemd[1]: Starting Name Service Cache Daemon (nsncd)...1899vm-test-run-hermes-remote> client # [    6.206433] systemd[1]: Stopping Host and Network Name Lookups...1900vm-test-run-hermes-remote> server # [    6.258082] systemd[1]: Starting Post-Boot Actions...1901vm-test-run-hermes-remote> client # [    6.207549] systemd[1]: Stopped target User and Group Name Lookups.1902vm-test-run-hermes-remote> client # [    6.208647] systemd[1]: Stopping User and Group Name Lookups...1903vm-test-run-hermes-remote> server # [    6.261077] systemd[1]: Started Reset console on configuration changes.1904vm-test-run-hermes-remote> client # [    6.209691] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...1905vm-test-run-hermes-remote> server # [    6.263395] systemd[1]: Starting resolvconf update...1906vm-test-run-hermes-remote> client # [    6.212192] systemd[1]: nscd.service: Deactivated successfully.1907vm-test-run-hermes-remote> client # [    6.213237] systemd[1]: Stopped Name Service Cache Daemon (nsncd).1908vm-test-run-hermes-remote> server # [    6.267266] systemd[1]: Starting D-Bus System Message Bus...1909vm-test-run-hermes-remote> client # [    6.217961] systemd[1]: Starting Name Service Cache Daemon (nsncd)...1910vm-test-run-hermes-remote> client # [    6.226771] systemd[1]: Finished User Runtime Directory /run/user/1000.1911vm-test-run-hermes-remote> server # [    6.280214] systemd[1]: enable-ksm.service: Deactivated successfully.1912vm-test-run-hermes-remote> client # [    6.231597] systemd[1]: Starting User Manager for UID 1000...1913vm-test-run-hermes-remote> server # [    6.289345] systemd[1]: Finished Post-Boot Actions.1914vm-test-run-hermes-remote> server # connecting to host...1915vm-test-run-hermes-remote> server # [    6.293573] systemd[1]: Started Name Service Cache Daemon (nsncd).1916vm-test-run-hermes-remote> client # [    6.240894] nsncd[622]: Sep 25 16:36:04.350 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"1917vm-test-run-hermes-remote> server # [    6.297051] nsncd[598]: Sep 25 16:36:04.323 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"1918vm-test-run-hermes-remote> server # [    6.297891] systemd[1]: Reached target Host and Network Name Lookups.1919vm-test-run-hermes-remote> server # [    6.298520] systemd[1]: Reached target User and Group Name Lookups.1920vm-test-run-hermes-remote> server # [    6.299252] systemd[1]: Starting User Login Management...1921vm-test-run-hermes-remote> client # [    6.248709] systemd[1]: Started Name Service Cache Daemon (nsncd).1922vm-test-run-hermes-remote> server # [    6.300508] systemd[1]: Finished Import lastlog data into lastlog2 database.1923vm-test-run-hermes-remote> client # [    6.251121] systemd[1]: Reached target Host and Network Name Lookups.1924vm-test-run-hermes-remote> server: Guest shell says: b'Spawning backdoor root shell...\n'1925vm-test-run-hermes-remote> server # [    6.302900] systemd[1]: install-microvm-hermes-alice.service: Deactivated successfully.1926vm-test-run-hermes-remote> server # [    6.308195] systemd[1]: Finished Install MicroVM 'hermes-alice'.1927vm-test-run-hermes-remote> server # [    6.309230] dbus-broker-launch[603]: Looking up NSS user entry for 'systemd-timesync'...1928vm-test-run-hermes-remote> server # [    6.312455] systemd[1]: Setup MicroVM 'hermes-alice' devices for passthrough skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/pci-setup1929vm-test-run-hermes-remote> server # [    6.313160] dbus-broker-launch[603]: NSS returned no entry for 'systemd-timesync'1930vm-test-run-hermes-remote> server # [    6.313670] dbus-broker-launch[603]: Invalid user-name in /nix/store/p8jsjs392n8k9fydkrnpyk86bi0rsf38-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"1931vm-test-run-hermes-remote> server # [    6.315125] systemd[1]: Starting Save MicroVM 'hermes-alice' booted configuration...1932vm-test-run-hermes-remote> server: connected to guest root shell1933vm-test-run-hermes-remote> server: (connecting took 6.91 seconds)1934vm-test-run-hermes-remote> server: (finished: waiting for the VM to finish booting, in 6.91 seconds)1935vm-test-run-hermes-remote> server # [    6.319322] systemd[1]: Started D-Bus System Message Bus.1936vm-test-run-hermes-remote> client # [    6.252594] systemd[1]: Reached target User and Group Name Lookups.1937vm-test-run-hermes-remote> client # [    6.262764] systemd[1]: Finished resolvconf update.1938vm-test-run-hermes-remote> client # [    6.264210] systemd[1]: Reached target Preparation for Network.1939vm-test-run-hermes-remote> client # [    6.265508] systemd[1]: Starting DHCP Client...1940vm-test-run-hermes-remote> client # [    6.266988] systemd[1]: Starting Address configuration of eth1...1941vm-test-run-hermes-remote> client # [    6.268598] (systemd)[631]: pam_unix(systemd-user:session): session opened for user alice(uid=1000) by (uid=0)1942vm-test-run-hermes-remote> client # [    6.271504] systemd[1]: Starting Extra networking commands....1943vm-test-run-hermes-remote> server # [    6.330607] dbus-broker-launch[603]: Ready1944vm-test-run-hermes-remote> client # [    6.284377] systemd-logind[563]: New session '1' of user 'alice' with class 'manager' and type 'unspecified'.1945vm-test-run-hermes-remote> server # [    6.352885] systemd-logind[631]: New seat seat0.1946vm-test-run-hermes-remote> server # [    6.355676] systemd-logind[631]: Watching system buttons on /dev/input/event2 (Power Button)1947vm-test-run-hermes-remote> client # [    6.304622] systemd[631]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1948vm-test-run-hermes-remote> server # [    6.356903] systemd-logind[631]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)1949vm-test-run-hermes-remote> server # [    6.358030] systemd-logind[631]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)1950vm-test-run-hermes-remote> server # [    6.364298] systemd[1]: Started User Login Management.1951vm-test-run-hermes-remote> server # [    6.372493] systemd[1]: Stopped target Host and Network Name Lookups.1952vm-test-run-hermes-remote> server # [    6.373269] systemd[1]: Stopping Host and Network Name Lookups...1953vm-test-run-hermes-remote> server # [    6.374105] systemd[1]: Stopped target User and Group Name Lookups.1954vm-test-run-hermes-remote> server # [    6.374654] systemd[1]: Stopping User and Group Name Lookups...1955vm-test-run-hermes-remote> server # [    6.375864] systemd[1]: Starting linger-users.service...1956vm-test-run-hermes-remote> client # [    6.324761] network-addresses-eth1-start[650]: adding address 192.168.1.1/24... done1957vm-test-run-hermes-remote> server # [    6.376580] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...1958vm-test-run-hermes-remote> server # [    6.379105] systemd[1]: nscd.service: Deactivated successfully.1959vm-test-run-hermes-remote> client # [    6.330761] network-addresses-eth1-start[650]: adding address 2001:db8:1::1/64... done1960vm-test-run-hermes-remote> server # [    6.383818] systemd[1]: Stopped Name Service Cache Daemon (nsncd).1961vm-test-run-hermes-remote> server # [    6.390472] systemd[1]: Starting Name Service Cache Daemon (nsncd)...1962vm-test-run-hermes-remote> server # [    6.398339] systemd[1]: linger-users.service: Deactivated successfully.1963vm-test-run-hermes-remote> client # [    6.346232] systemd[1]: Finished Address configuration of eth1.1964vm-test-run-hermes-remote> server # [    6.399226] systemd[1]: Finished linger-users.service.1965vm-test-run-hermes-remote> server # [    6.405054] systemd[1]: Finished Owner-match loopback firewall for hermes microvms.1966vm-test-run-hermes-remote> server # [    6.407210] systemd[1]: Finished resolvconf update.1967vm-test-run-hermes-remote> server # [    6.407921] systemd[1]: Reached target Preparation for Network.1968vm-test-run-hermes-remote> server # [    6.409819] systemd[1]: Starting DHCP Client...1969vm-test-run-hermes-remote> server # [    6.411845] systemd[1]: Starting Address configuration of eth1...1970vm-test-run-hermes-remote> server # [    6.413793] systemd[1]: Starting Extra networking commands....1971vm-test-run-hermes-remote> server # [    6.415424] systemd[1]: Started Name Service Cache Daemon (nsncd).1972vm-test-run-hermes-remote> server # [    6.416322] nsncd[711]: Sep 25 16:36:04.445 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"1973vm-test-run-hermes-remote> server # [    6.417087] systemd[1]: Reached target Host and Network Name Lookups.1974vm-test-run-hermes-remote> server # [    6.417638] systemd[1]: Reached target User and Group Name Lookups.1975vm-test-run-hermes-remote> server # [    6.424414] systemd[1]: Finished Save MicroVM 'hermes-alice' booted configuration.1976vm-test-run-hermes-remote> server # [    6.426485] systemd[1]: Setup MicroVM 'hermes-alice' MACVTAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/macvtap-up1977vm-test-run-hermes-remote> client # [    6.377415] dhcpcd[662]: dhcpcd-10.3.2 starting1978vm-test-run-hermes-remote> server # [    6.430302] systemd[1]: Starting VirtioFS daemons for MicroVM 'hermes-alice'...1979vm-test-run-hermes-remote> client # [    6.384644] dhcpcd[714]: dev: loaded udev1980vm-test-run-hermes-remote> client # [    6.569231] 8021q: 802.1Q VLAN Support v1.81981vm-test-run-hermes-remote> client # [    6.569846] 8021q: adding VLAN 0 to HW filter on device eth11982vm-test-run-hermes-remote> client # [    6.398701] systemd[631]: Queued start job for default target Main User Target.1983vm-test-run-hermes-remote> client # [    6.401689] systemd[631]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1984vm-test-run-hermes-remote> client # [    6.403577] systemd[1]: Finished Extra networking commands..1985vm-test-run-hermes-remote> client # [    6.405252] systemd[1]: Reached target Network.1986vm-test-run-hermes-remote> server # [    6.456206] network-addresses-eth1-start[725]: adding address 192.168.1.2/24... done1987vm-test-run-hermes-remote> client # [    6.406221] systemd[631]: Created slice User Application Slice.1988vm-test-run-hermes-remote> client # [    6.407411] systemd[631]: Started Daily Cleanup of User's Temporary Directories.1989vm-test-run-hermes-remote> client # [    6.409119] systemd[631]: Reached target Paths.1990vm-test-run-hermes-remote> server # [    6.461508] network-addresses-eth1-start[725]: adding address 2001:db8:1::2/64... done1991vm-test-run-hermes-remote> client # [    6.413953] systemd[631]: Reached target Timers.1992vm-test-run-hermes-remote> client # [    6.414834] systemd[631]: Starting D-Bus User Message Bus Socket...1993vm-test-run-hermes-remote> client # [    6.415955] systemd[1]: Starting Permit User Sessions...1994vm-test-run-hermes-remote> client # [    6.416926] systemd[631]: Starting Create User Files and Directories...1995vm-test-run-hermes-remote> server # [    6.470479] systemd[1]: Finished Address configuration of eth1.1996vm-test-run-hermes-remote> client # [    6.421165] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.1997vm-test-run-hermes-remote> server # [    6.480505] dhcpcd[746]: dhcpcd-10.3.2 starting1998vm-test-run-hermes-remote> server # [    6.482657] dhcpcd[808]: dev: loaded udev1999vm-test-run-hermes-remote> server # [    6.488345] systemd[1]: Finished Extra networking commands..2000vm-test-run-hermes-remote> server # [    6.489459] systemd[1]: Reached target Network.2001vm-test-run-hermes-remote> client # [    6.438092] systemd[1]: Finished Permit User Sessions.2002vm-test-run-hermes-remote> client # [    6.440070] systemd[1]: Started Getty on tty1.2003vm-test-run-hermes-remote> server # [    6.490289] systemd[1]: Setup MicroVM 'hermes-alice' TAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/tap-up2004vm-test-run-hermes-remote> client # [    6.440907] systemd[1]: Reached target Login Prompts.2005vm-test-run-hermes-remote> server # [    6.492933] systemd[1]: Starting SSH Daemon...2006vm-test-run-hermes-remote> server # [    6.679248] 8021q: 802.1Q VLAN Support v1.82007vm-test-run-hermes-remote> server # [    6.494096] systemd[1]: Starting Permit User Sessions...2008vm-test-run-hermes-remote> server # [    6.680624] 8021q: adding VLAN 0 to HW filter on device eth12009vm-test-run-hermes-remote> server # [    6.508447] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.2010vm-test-run-hermes-remote> server # [    6.517035] systemd[1]: Finished Permit User Sessions.2011vm-test-run-hermes-remote> server # [    6.519526] systemd[1]: Started Getty on tty1.2012vm-test-run-hermes-remote> server # [    6.520683] systemd[1]: Reached target Login Prompts.2013vm-test-run-hermes-remote> server # [    6.533268] sshd[814]: Server listening on 0.0.0.0 port 22.2014vm-test-run-hermes-remote> server # [    6.534080] sshd[814]: Server listening on :: port 22.2015vm-test-run-hermes-remote> client # [    6.659070] cfg80211: Loading compiled-in X.509 certificates for regulatory database2016vm-test-run-hermes-remote> server # [    6.534460] systemd[1]: Started SSH Daemon.2017vm-test-run-hermes-remote> client # [    6.487620] systemd[631]: Listening on D-Bus User Message Bus Socket.2018vm-test-run-hermes-remote> client # [    6.489751] systemd[631]: Reached target Sockets.2019vm-test-run-hermes-remote> client # [    6.491463] systemd[631]: Finished Create User Files and Directories.2020vm-test-run-hermes-remote> client # [    6.493547] systemd[631]: Reached target Basic System.2021vm-test-run-hermes-remote> client # [    6.494502] systemd[1]: Started User Manager for UID 1000.2022vm-test-run-hermes-remote> client # [    6.671752] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'2023vm-test-run-hermes-remote> client # [    6.673288] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'2024vm-test-run-hermes-remote> client # [    6.498690] systemd[631]: Starting Run user-specific NixOS activation...2025vm-test-run-hermes-remote> client # [    6.677380] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -22026vm-test-run-hermes-remote> client # [    6.678619] cfg80211: failed to load regulatory.db2027vm-test-run-hermes-remote> client # [    6.518864] systemd[631]: Finished Run user-specific NixOS activation.2028vm-test-run-hermes-remote> client # [    6.520033] systemd[631]: Reached target Main User Target.2029vm-test-run-hermes-remote> client # [    6.521392] systemd[631]: Startup finished in 223ms.2030vm-test-run-hermes-remote> client # [    6.703412] 8021q: adding VLAN 0 to HW filter on device eth02031vm-test-run-hermes-remote> client # [    6.528481] dhcpcd[714]: eth0: waiting for carrier2032vm-test-run-hermes-remote> client # [    6.529403] dhcpcd[714]: eth0: carrier acquired2033vm-test-run-hermes-remote> client # [    6.531915] dhcpcd[714]: DUID 00:01:00:01:32:49:5f:74:52:54:00:12:34:562034vm-test-run-hermes-remote> client # [    6.532611] dhcpcd[714]: eth0: IAID 00:12:34:562035vm-test-run-hermes-remote> client # [    6.533258] dhcpcd[714]: eth0: adding address fe80::5054:ff:fe12:34562036vm-test-run-hermes-remote> server # [    6.770906] cfg80211: Loading compiled-in X.509 certificates for regulatory database2037vm-test-run-hermes-remote> server # [    6.781356] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'2038vm-test-run-hermes-remote> server # [    6.782398] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'2039vm-test-run-hermes-remote> server # [    6.784137] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -22040vm-test-run-hermes-remote> server # [    6.785408] cfg80211: failed to load regulatory.db2041vm-test-run-hermes-remote> server # [    6.807999] 8021q: adding VLAN 0 to HW filter on device eth02042vm-test-run-hermes-remote> server # [    6.623750] dhcpcd[808]: eth0: waiting for carrier2043vm-test-run-hermes-remote> server # [    6.624706] dhcpcd[808]: eth0: carrier acquired2044vm-test-run-hermes-remote> server # [    6.627604] dhcpcd[808]: DUID 00:01:00:01:32:49:5f:74:52:54:00:12:34:562045vm-test-run-hermes-remote> server # [    6.628720] dhcpcd[808]: eth0: IAID 00:12:34:562046vm-test-run-hermes-remote> server # [    6.629602] dhcpcd[808]: eth0: adding address fe80::5054:ff:fe12:34562047vm-test-run-hermes-remote> server # [    6.686945] dhcpcd[808]: eth0: soliciting a DHCP lease2048vm-test-run-hermes-remote> server # [    6.879289] NET: Registered PF_PACKET protocol family2049vm-test-run-hermes-remote> server # [    6.707322] dhcpcd[808]: eth0: offered 10.0.2.15 from 10.0.2.22050vm-test-run-hermes-remote> server # [    6.715218] dhcpcd[808]: eth0: probing address 10.0.2.15/242051vm-test-run-hermes-remote> server # [    6.766866] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:04,796 INFO Set uid to user 0 succeeded2052vm-test-run-hermes-remote> server # [    6.768530] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:04,798 INFO supervisord started with pid 8162053vm-test-run-hermes-remote> client # [    7.320352] dhcpcd[714]: eth0: soliciting a DHCP lease2054vm-test-run-hermes-remote> client # [    7.503827] NET: Registered PF_PACKET protocol family2055vm-test-run-hermes-remote> client # [    7.339394] dhcpcd[714]: eth0: offered 10.0.2.15 from 10.0.2.22056vm-test-run-hermes-remote> client # [    7.341195] dhcpcd[714]: eth0: probing address 10.0.2.15/242057vm-test-run-hermes-remote> server # [    7.771650] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:05,801 INFO spawned: 'notify' with pid 8422058vm-test-run-hermes-remote> server # [    7.773485] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:05,803 INFO spawned: 'virtiofsd-hermes-exchange' with pid 8432059vm-test-run-hermes-remote> server # [    7.776260] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:05,805 INFO spawned: 'virtiofsd-hermes-state' with pid 8442060vm-test-run-hermes-remote> server # [    7.778551] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:05,808 INFO spawned: 'virtiofsd-host-config' with pid 8452061vm-test-run-hermes-remote> server # [    7.781541] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:05,811 INFO spawned: 'virtiofsd-ro-store' with pid 8462062vm-test-run-hermes-remote> server # [    7.804467] supervisord[816]: virtiofsd-ro-store [2026-09-25T16:36:05Z WARN  virtiofsd::passthrough] Filesystem mounted on "/" (mount ID: 57): Filesystem does not support file handles, falling back to O_PATH FDs2063vm-test-run-hermes-remote> server # [    7.805249] supervisord[816]: virtiofsd-ro-store [2026-09-25T16:36:05Z WARN  virtiofsd::passthrough] Failed to generate a file handle for the root node, disabling file handles altogether2064vm-test-run-hermes-remote> server # [    7.809443] supervisord[816]: virtiofsd-hermes-state [2026-09-25T16:36:05Z INFO  virtiofsd] Waiting for vhost-user socket connection...2065vm-test-run-hermes-remote> server # [    7.810156] supervisord[816]: virtiofsd-host-config [2026-09-25T16:36:05Z INFO  virtiofsd] Waiting for vhost-user socket connection...2066vm-test-run-hermes-remote> server # [    7.812800] supervisord[816]: virtiofsd-ro-store [2026-09-25T16:36:05Z INFO  virtiofsd] Waiting for vhost-user socket connection...2067vm-test-run-hermes-remote> server # [    7.814577] supervisord[816]: virtiofsd-hermes-exchange [2026-09-25T16:36:05Z INFO  virtiofsd] Waiting for vhost-user socket connection...2068vm-test-run-hermes-remote> client # [    8.272941] dhcpcd[714]: eth0: soliciting an IPv6 router2069vm-test-run-hermes-remote> client # [    8.273966] dhcpcd[714]: eth0: Router Advertisement from fe80::22070vm-test-run-hermes-remote> client # [    8.275031] dhcpcd[714]: eth0: adding address fec0::5054:ff:fe12:3456/642071vm-test-run-hermes-remote> client # [    8.276116] dhcpcd[714]: eth0: adding route to fec0::/642072vm-test-run-hermes-remote> client # [    8.277102] dhcpcd[714]: eth0: adding default route via fe80::22073vm-test-run-hermes-remote> server # [    8.630477] dhcpcd[808]: eth0: soliciting an IPv6 router2074vm-test-run-hermes-remote> server # [    8.631595] dhcpcd[808]: eth0: Router Advertisement from fe80::22075vm-test-run-hermes-remote> server # [    8.632288] dhcpcd[808]: eth0: adding address fec0::5054:ff:fe12:3456/642076vm-test-run-hermes-remote> server # [    8.632803] dhcpcd[808]: eth0: adding route to fec0::/642077vm-test-run-hermes-remote> server # [    8.633779] dhcpcd[808]: eth0: adding default route via fe80::22078vm-test-run-hermes-remote> server # [    8.818201] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:06,847 INFO success: notify entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)2079vm-test-run-hermes-remote> server # [    8.819059] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:06,847 INFO success: virtiofsd-hermes-exchange entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)2080vm-test-run-hermes-remote> server # [    8.819686] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:06,848 INFO success: virtiofsd-hermes-state entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)2081vm-test-run-hermes-remote> server # [    8.824794] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:06,848 INFO success: virtiofsd-host-config entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)2082vm-test-run-hermes-remote> server # [    8.827090] microvm-virtiofsd@hermes-alice[816]: 2026-09-25 16:36:06,854 INFO success: virtiofsd-ro-store entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)2083vm-test-run-hermes-remote> server # [    8.833859] systemd[1]: Started VirtioFS daemons for MicroVM 'hermes-alice'.2084vm-test-run-hermes-remote> server # [    8.836117] systemd[1]: Starting MicroVM 'hermes-alice'...2085vm-test-run-hermes-remote> server # [    8.937817] systemd[1]: Started MicroVM 'hermes-alice'.2086vm-test-run-hermes-remote> server # [    8.939088] systemd[1]: Reached target microvms.target.2087vm-test-run-hermes-remote> server # [    9.053175] supervisord[816]: virtiofsd-hermes-exchange [2026-09-25T16:36:07Z INFO  virtiofsd] Client connected, servicing requests2088vm-test-run-hermes-remote> server # [    9.054141] supervisord[816]: virtiofsd-hermes-state [2026-09-25T16:36:07Z INFO  virtiofsd] Client connected, servicing requests2089vm-test-run-hermes-remote> server # [    9.054828] microvm@hermes-alice[915]: microvm@hermes-alice: warning: Number of SMP cpus requested (8) exceeds the recommended cpus supported by KVM (4)2090vm-test-run-hermes-remote> server # [    9.072419] microvm@hermes-alice[915]: microvm@hermes-alice: warning: Number of hotpluggable cpus requested (8) exceeds the recommended cpus supported by KVM (4)2091vm-test-run-hermes-remote> server # [    9.073374] supervisord[816]: virtiofsd-host-config [2026-09-25T16:36:07Z INFO  virtiofsd] Client connected, servicing requests2092vm-test-run-hermes-remote> server # [    9.074066] supervisord[816]: virtiofsd-ro-store [2026-09-25T16:36:07Z INFO  virtiofsd] Client connected, servicing requests2093vm-test-run-hermes-remote> server # [    9.153279] microvm@hermes-alice[915]: SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)2094vm-test-run-hermes-remote> server # [    9.373453] microvm@hermes-alice[915]: Booting from ROM...2095vm-test-run-hermes-remote> server # [    9.376546] microvm@hermes-alice[915]: PPrroobbiinngg  EEDDDD  ((eedddd==ooffff  ttoo  ddiissaabbllee))......  ook2096vm-test-run-hermes-remote> server # [    9.584318] microvm@hermes-alice[915]: No EFI environment detected.2097vm-test-run-hermes-remote> server # [    9.587369] microvm@hermes-alice[915]: early console in extract_kernel2098vm-test-run-hermes-remote> server # [    9.589371] microvm@hermes-alice[915]: input_data: 0x0000000003abb2cc2099vm-test-run-hermes-remote> server # [    9.591258] microvm@hermes-alice[915]: input_len: 0x0000000000cc60f42100vm-test-run-hermes-remote> server # [    9.592951] microvm@hermes-alice[915]: output: 0x00000000010000002101vm-test-run-hermes-remote> server # [    9.594574] microvm@hermes-alice[915]: output_len: 0x0000000003729e082102vm-test-run-hermes-remote> server # [    9.596486] microvm@hermes-alice[915]: kernel_total_size: 0x0000000002e300002103vm-test-run-hermes-remote> server # [    9.598199] microvm@hermes-alice[915]: needed_size: 0x00000000038000002104vm-test-run-hermes-remote> server # [    9.600143] microvm@hermes-alice[915]: trampoline_32bit: 0x00000000000000002105vm-test-run-hermes-remote> server # [    9.602156] microvm@hermes-alice[915]: Physical KASLR using RDRAND RDTSC...2106vm-test-run-hermes-remote> server # [    9.603989] microvm@hermes-alice[915]: Virtual KASLR using RDRAND RDTSC...2107vm-test-run-hermes-remote> server # [    9.604710] microvm@hermes-alice[915]:2108vm-test-run-hermes-remote> server # [    9.606494] microvm@hermes-alice[915]: Decompressing Linux... No EFI environment detected.2109vm-test-run-hermes-remote> server # [   10.133381] microvm@hermes-alice[915]: Parsing ELF... Performing relocations... done.2110vm-test-run-hermes-remote> server # [   10.135679] microvm@hermes-alice[915]: Booting the kernel (entry_offset: 0x000000000278f560).2111vm-test-run-hermes-remote> server # [   10.153304] microvm@hermes-alice[915]: [    0.000000] Linux version 6.18.53 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 21 13:06:06 UTC 20262112vm-test-run-hermes-remote> server # [   10.167161] microvm@hermes-alice[915]: [    0.000000] Command line: earlyprintk=ttyS0 console=ttyS0 reboot=t panic=-1 8250.nr_uarts=1 8250.nr_uarts=1 root=fstab loglevel=4 lsm=landlock,yama,bpf init=/nix/store/n2n6cicfm07f4ip8vz0s9jxxxbn19b11-nixos-system-hermes-alice-26.11pre-git/init regInfo=/nix/store/21vnz11wg99hdl85r2qshl3g1421zl4c-closure-info/registration2113vm-test-run-hermes-remote> server # [   10.169187] microvm@hermes-alice[915]: [    0.000000] BIOS-provided physical RAM map:2114vm-test-run-hermes-remote> server # [   10.172913] microvm@hermes-alice[915]: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable2115vm-test-run-hermes-remote> server # [   10.176319] microvm@hermes-alice[915]: [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved2116vm-test-run-hermes-remote> server # [   10.179650] microvm@hermes-alice[915]: [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved2117vm-test-run-hermes-remote> server # [   10.182899] microvm@hermes-alice[915]: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfffdfff] usable2118vm-test-run-hermes-remote> server # [   10.186168] microvm@hermes-alice[915]: [    0.000000] BIOS-e820: [mem 0x00000000bfffe000-0x00000000bfffffff] reserved2119vm-test-run-hermes-remote> server # [   10.189496] microvm@hermes-alice[915]: [    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved2120vm-test-run-hermes-remote> server # [   10.192797] microvm@hermes-alice[915]: [    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved2121vm-test-run-hermes-remote> server # [   10.196034] microvm@hermes-alice[915]: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable2122vm-test-run-hermes-remote> server # [   10.198663] microvm@hermes-alice[915]: [    0.000000] printk: legacy bootconsole [earlyser0] enabled2123vm-test-run-hermes-remote> server # [   10.204631] microvm@hermes-alice[915]: Memory KASLR using RDRAND RDTSC...2124vm-test-run-hermes-remote> server # [   12.134338] microvm@hermes-alice[915]: Poking KASLR using RDRAND RDTSC...2125vm-test-run-hermes-remote> server # [   12.250605] dhcpcd[808]: eth0: leased 10.0.2.15 for 86400 seconds2126vm-test-run-hermes-remote> server # [   12.251741] dhcpcd[808]: eth0: adding route to 10.0.2.0/242127vm-test-run-hermes-remote> server # [   12.252781] dhcpcd[808]: eth0: adding default route via 10.0.2.22128vm-test-run-hermes-remote> server # [   12.307543] systemd[1]: Started DHCP Client.2129vm-test-run-hermes-remote> server # [   12.308648] systemd[1]: Reached target Multi-User System.2130vm-test-run-hermes-remote> server # [   12.309538] systemd[1]: Startup finished in 951ms (kernel) + 3.139s (initrd) + 8.218s (userspace) = 12.309s.2131vm-test-run-hermes-remote> server # [   12.341664] microvm@hermes-alice[915]: [    2.093054] PCI: Fatal: No config space access function found2132vm-test-run-hermes-remote> client # [   12.504053] dhcpcd[714]: eth0: leased 10.0.2.15 for 86400 seconds2133vm-test-run-hermes-remote> client # [   12.504490] dhcpcd[714]: eth0: adding route to 10.0.2.0/242134vm-test-run-hermes-remote> client # [   12.505138] dhcpcd[714]: eth0: adding default route via 10.0.2.22135vm-test-run-hermes-remote> server: (finished: waiting for unit multi-user.target, in 13.15 seconds)2136vm-test-run-hermes-remote> server: waiting for unit sshd.service2137vm-test-run-hermes-remote> server: (finished: waiting for unit sshd.service, in 0.03 seconds)2138vm-test-run-hermes-remote> client: waiting for unit multi-user.target2139vm-test-run-hermes-remote> client: waiting for the VM to finish booting2140vm-test-run-hermes-remote> client: Guest shell says: b'Spawning backdoor root shell...\n'2141vm-test-run-hermes-remote> client: connected to guest root shell2142vm-test-run-hermes-remote> client: (connecting took 0.00 seconds)2143vm-test-run-hermes-remote> client: (finished: waiting for the VM to finish booting, in 0.00 seconds)2144vm-test-run-hermes-remote> client # [   12.556307] systemd[1]: Started DHCP Client.2145vm-test-run-hermes-remote> client # [   12.557201] systemd[1]: Reached target Multi-User System.2146vm-test-run-hermes-remote> client # [   12.558384] systemd[1]: Startup finished in 714ms (kernel) + 3.128s (initrd) + 8.715s (userspace) = 12.558s.2147vm-test-run-hermes-remote> client: (finished: waiting for unit multi-user.target, in 0.04 seconds)2148vm-test-run-hermes-remote> client: must succeed: install -d -m 0755 /var/lib/hermes-identity2149vm-test-run-hermes-remote> client: (finished: must succeed: install -d -m 0755 /var/lib/hermes-identity, in 0.01 seconds)2150vm-test-run-hermes-remote> client: must succeed: install -m 0400 -o alice -g users /nix/store/36ldqrhq3c9f218rdz5s24r6kd7q6f9i-privkey.snakeoil /var/lib/hermes-identity/alice2151vm-test-run-hermes-remote> client: (finished: must succeed: install -m 0400 -o alice -g users /nix/store/36ldqrhq3c9f218rdz5s24r6kd7q6f9i-privkey.snakeoil /var/lib/hermes-identity/alice, in 0.01 seconds)2152vm-test-run-hermes-remote> client: must fail: test -e /home/alice/.ssh2153vm-test-run-hermes-remote> client: (finished: must fail: test -e /home/alice/.ssh, in 0.01 seconds)2154vm-test-run-hermes-remote> ??? Warning (UserWarning): wait_for_unit(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.2155vm-test-run-hermes-remote>     File "/nix/store/sriy4r0q27j8r84xmfnwwzc7q3jqgm4m-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 392156vm-test-run-hermes-remote> server: waiting for unit microvm@hermes-alice.service2157vm-test-run-hermes-remote> server: (finished: waiting for unit microvm@hermes-alice.service, in 0.06 seconds)2158vm-test-run-hermes-remote> subtest: the token file mode is the whole ACL2159vm-test-run-hermes-remote> server: must succeed: stat -c '%U %a' /var/lib/hermes-microvm/alice/desktop-token2160vm-test-run-hermes-remote> server: (finished: must succeed: stat -c '%U %a' /var/lib/hermes-microvm/alice/desktop-token, in 0.01 seconds)2161vm-test-run-hermes-remote> (finished: subtest: the token file mode is the whole ACL, in 0.01 seconds)2162vm-test-run-hermes-remote> client: must succeed: id -u alice2163vm-test-run-hermes-remote> client: (finished: must succeed: id -u alice, in 0.01 seconds)2164vm-test-run-hermes-remote> client: waiting for unit user@1000.service2165vm-test-run-hermes-remote> client: (finished: waiting for unit user@1000.service, in 0.04 seconds)2166vm-test-run-hermes-remote> subtest: the launcher opens the tunnel and prints the remote env2167vm-test-run-hermes-remote> client: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 hermes-desktop-remote --print-env'2168vm-test-run-hermes-remote> client # [   12.746062] su[826]: Successful su for alice by root2169vm-test-run-hermes-remote> client # [   12.752060] su[826]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0)2170vm-test-run-hermes-remote> client # [   12.780244] systemd[631]: Starting SSH forward to the remote hermes dashboard...2171vm-test-run-hermes-remote> client # [   12.797291] systemd[631]: Started SSH forward to the remote hermes dashboard.2172vm-test-run-hermes-remote> server # [   12.957205] sshd-session[1037]: Accepted publickey for alice from 2001:db8:1::1 port 56504 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E2173vm-test-run-hermes-remote> server # [   12.965646] sshd-session[1037]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0)2174vm-test-run-hermes-remote> server # [   12.987880] systemd[1]: Created slice Slice /user/1000.2175vm-test-run-hermes-remote> server # [   12.991088] systemd[1]: Starting User Runtime Directory /run/user/1000...2176vm-test-run-hermes-remote> server # [   13.020813] systemd-logind[631]: New session '1' of user 'alice' with class 'user' and type 'tty'.2177vm-test-run-hermes-remote> server # [   13.027644] systemd[1]: Finished User Runtime Directory /run/user/1000.2178vm-test-run-hermes-remote> server # [   13.029883] systemd[1]: Starting User Manager for UID 1000...2179vm-test-run-hermes-remote> server # [   13.051944] (systemd)[1043]: pam_unix(systemd-user:session): session opened for user alice(uid=1000) by (uid=0)2180vm-test-run-hermes-remote> server # [   13.053970] systemd-logind[631]: New session '2' of user 'alice' with class 'manager' and type 'unspecified'.2181vm-test-run-hermes-remote> server # [   13.077138] systemd[1043]: Failed to adjust io pressure threshold, ignoring: Device or resource busy2182vm-test-run-hermes-remote> server # [   13.162194] systemd[1043]: Queued start job for default target Main User Target.2183vm-test-run-hermes-remote> server # [   13.167782] systemd[1043]: Failed to adjust io pressure threshold, ignoring: Device or resource busy2184vm-test-run-hermes-remote> server # [   13.169644] systemd[1043]: Created slice User Application Slice.2185vm-test-run-hermes-remote> server # [   13.170847] systemd[1043]: Started Daily Cleanup of User's Temporary Directories.2186vm-test-run-hermes-remote> server # [   13.172293] systemd[1043]: Reached target Paths.2187vm-test-run-hermes-remote> server # [   13.173242] systemd[1043]: Reached target Timers.2188vm-test-run-hermes-remote> server # [   13.174265] systemd[1043]: Starting D-Bus User Message Bus Socket...2189vm-test-run-hermes-remote> server # [   13.175350] systemd[1043]: Starting Create User Files and Directories...2190vm-test-run-hermes-remote> server # [   13.190492] systemd[1043]: Finished Create User Files and Directories.2191vm-test-run-hermes-remote> server # [   13.202808] systemd[1043]: Listening on D-Bus User Message Bus Socket.2192vm-test-run-hermes-remote> server # [   13.204105] systemd[1043]: Reached target Sockets.2193vm-test-run-hermes-remote> server # [   13.204965] systemd[1043]: Reached target Basic System.2194vm-test-run-hermes-remote> server # [   13.206066] systemd[1]: Started User Manager for UID 1000.2195vm-test-run-hermes-remote> server # [   13.207227] systemd[1043]: Starting Run user-specific NixOS activation...2196vm-test-run-hermes-remote> server # [   13.208615] systemd[1]: Started Session 1 of User alice.2197vm-test-run-hermes-remote> server # [   13.225862] systemd[1043]: Finished Run user-specific NixOS activation.2198vm-test-run-hermes-remote> server # [   13.227049] systemd[1043]: Reached target Main User Target.2199vm-test-run-hermes-remote> server # [   13.228038] systemd[1043]: Startup finished in 162ms.2200vm-test-run-hermes-remote> server # [   13.250734] sshd-session[1052]: Accepted publickey for alice from 2001:db8:1::1 port 56512 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E2201vm-test-run-hermes-remote> server # [   13.258194] sshd-session[1052]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0)2202vm-test-run-hermes-remote> server # [   13.263096] systemd-logind[631]: New session '3' of user 'alice' with class 'user' and type 'tty'.2203vm-test-run-hermes-remote> server # [   13.268944] systemd[1]: Started Session 3 of User alice.2204vm-test-run-hermes-remote> server # [   13.281089] sshd-session[1062]: Received disconnect from 2001:db8:1::1 port 56512:11: disconnected by user2205vm-test-run-hermes-remote> server # [   13.282750] sshd-session[1062]: Disconnected from user alice 2001:db8:1::1 port 565122206vm-test-run-hermes-remote> client # hermes-desktop-remote: this prints the dashboard token, which never expires. Keep it out of scrollback, logs and bug reports.2207vm-test-run-hermes-remote> server # [   13.284144] sshd-session[1052]: pam_unix(sshd:session): session closed for user alice2208vm-test-run-hermes-remote> client # [   13.233771] su[826]: pam_unix(su:session): session closed for user alice2209vm-test-run-hermes-remote> server # [   13.285467] systemd[1]: session-3.scope: Deactivated successfully.2210vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 hermes-desktop-remote --print-env', in 0.50 seconds)2211vm-test-run-hermes-remote> server: must succeed: cat /var/lib/hermes-microvm/alice/desktop-token2212vm-test-run-hermes-remote> server # [   13.286562] systemd-logind[631]: Session 3 logged out. Waiting for processes to exit.2213vm-test-run-hermes-remote> server # [   13.288360] systemd-logind[631]: Removed session 3.2214vm-test-run-hermes-remote> server: (finished: must succeed: cat /var/lib/hermes-microvm/alice/desktop-token, in 0.01 seconds)2215vm-test-run-hermes-remote> client: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 systemctl --user is-active hermes-remote-tunnel.service'2216vm-test-run-hermes-remote> client # [   13.258858] su[861]: Successful su for alice by root2217vm-test-run-hermes-remote> client # [   13.264918] su[861]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0)2218vm-test-run-hermes-remote> client # [   13.275453] su[861]: pam_unix(su:session): session closed for user alice2219vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 systemctl --user is-active hermes-remote-tunnel.service', in 0.03 seconds)2220vm-test-run-hermes-remote> (finished: subtest: the launcher opens the tunnel and prints the remote env, in 0.55 seconds)2221vm-test-run-hermes-remote> subtest: the key runs the forced command, never the caller's2222vm-test-run-hermes-remote> client: must succeed: su -l alice -c '/nix/store/5j1k7bxsljgrgql1cmr98wng8lpk2idn-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice alice@server -- id -un'2223vm-test-run-hermes-remote> client # [   13.289723] su[866]: Successful su for alice by root2224vm-test-run-hermes-remote> client # [   13.295647] su[866]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0)2225vm-test-run-hermes-remote> server # [   13.432600] sshd-session[1068]: Accepted publickey for alice from 2001:db8:1::1 port 56526 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E2226vm-test-run-hermes-remote> server # [   13.440156] sshd-session[1068]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0)2227vm-test-run-hermes-remote> server # [   13.445484] systemd-logind[631]: New session '4' of user 'alice' with class 'user' and type 'tty'.2228vm-test-run-hermes-remote> server # [   13.453515] systemd[1]: Started Session 4 of User alice.2229vm-test-run-hermes-remote> server # [   13.466901] sshd-session[1071]: Received disconnect from 2001:db8:1::1 port 56526:11: disconnected by user2230vm-test-run-hermes-remote> client # [   13.416746] su[866]: pam_unix(su:session): session closed for user alice2231vm-test-run-hermes-remote> server # [   13.467846] sshd-session[1071]: Disconnected from user alice 2001:db8:1::1 port 565262232vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c '/nix/store/5j1k7bxsljgrgql1cmr98wng8lpk2idn-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice alice@server -- id -un', in 0.14 seconds)2233vm-test-run-hermes-remote> (finished: subtest: the key runs the forced command, never the caller's, in 0.14 seconds)2234vm-test-run-hermes-remote> subtest: the key forwards to the dashboard port and nowhere else2235vm-test-run-hermes-remote> client: must succeed: su -l alice -c '/nix/store/5j1k7bxsljgrgql1cmr98wng8lpk2idn-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice -N -f -L 127.0.0.1:24999:127.0.0.1:22 alice@server'2236vm-test-run-hermes-remote> server # [   13.469770] sshd-session[1068]: pam_unix(sshd:session): session closed for user alice2237vm-test-run-hermes-remote> server # [   13.472949] systemd[1]: session-4.scope: Deactivated successfully.2238vm-test-run-hermes-remote> server # [   13.474610] systemd-logind[631]: Session 4 logged out. Waiting for processes to exit.2239vm-test-run-hermes-remote> server # [   13.476332] systemd-logind[631]: Removed session 4.2240vm-test-run-hermes-remote> client # [   13.431928] su[871]: Successful su for alice by root2241vm-test-run-hermes-remote> client # [   13.437812] su[871]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0)2242vm-test-run-hermes-remote> client # [   13.524433] su[871]: pam_unix(su:session): session closed for user alice2243vm-test-run-hermes-remote> server # [   13.575142] sshd-session[1074]: Accepted publickey for alice from 2001:db8:1::1 port 56534 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E2244vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c '/nix/store/5j1k7bxsljgrgql1cmr98wng8lpk2idn-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice -N -f -L 127.0.0.1:24999:127.0.0.1:22 alice@server', in 0.11 seconds)2245vm-test-run-hermes-remote> client: waiting for TCP port 24999 on 127.0.0.12246vm-test-run-hermes-remote> server # [   13.583525] sshd-session[1074]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0)2247vm-test-run-hermes-remote> server # [   13.589366] systemd-logind[631]: New session '5' of user 'alice' with class 'user' and type 'tty'.2248vm-test-run-hermes-remote> server # [   13.596252] systemd[1]: Started Session 5 of User alice.2249vm-test-run-hermes-remote> client # Connection to 127.0.0.1 24999 port [tcp/*] succeeded!2250vm-test-run-hermes-remote> client: (finished: waiting for TCP port 24999 on 127.0.0.1, in 0.02 seconds)2251vm-test-run-hermes-remote> client: must succeed: timeout 5 /nix/store/qfgsbhv7smpx09pc2ipvw58g9xfxymfp-netcat-openbsd-1.238-1/bin/nc 127.0.0.1 24999 < /dev/null || true2252vm-test-run-hermes-remote> server # [   13.600451] sshd-session[1077]: Received request from 2001:db8:1::1 port 56534 to connect to host 127.0.0.1 port 22, but the request was denied.2253vm-test-run-hermes-remote> server # [   13.613904] sshd-session[1077]: Received request from 2001:db8:1::1 port 56534 to connect to host 127.0.0.1 port 22, but the request was denied.2254vm-test-run-hermes-remote> client: (finished: must succeed: timeout 5 /nix/store/qfgsbhv7smpx09pc2ipvw58g9xfxymfp-netcat-openbsd-1.238-1/bin/nc 127.0.0.1 24999 < /dev/null || true, in 0.02 seconds)2255vm-test-run-hermes-remote> (finished: subtest: the key forwards to the dashboard port and nowhere else, in 0.15 seconds)2256vm-test-run-hermes-remote> subtest: the guest dashboard answers /api/status through the tunnel2257vm-test-run-hermes-remote> ??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.2258vm-test-run-hermes-remote>     File "/nix/store/sriy4r0q27j8r84xmfnwwzc7q3jqgm4m-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 392259vm-test-run-hermes-remote> client: waiting for success: /nix/store/cp8qnyl8i0s62g3a1465i258mf5bcr6k-curl-8.22.0-bin/bin/curl -sf -o /dev/null http://127.0.0.1:23901/api/status2260vm-test-run-hermes-remote> ??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.2261vm-test-run-hermes-remote>     File "/nix/store/sriy4r0q27j8r84xmfnwwzc7q3jqgm4m-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 392262vm-test-run-hermes-remote> server # [   13.648491] systemd[1]: Created slice Slice /system/hermes-dashboard-fwd-alice.2263vm-test-run-hermes-remote> server # [   13.649822] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47782).2264vm-test-run-hermes-remote> server # [   15.727454] socat[1079]: 2026/09/25 16:36:13 socat[1079] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2265vm-test-run-hermes-remote> server # [   15.728954] systemd[1]: hermes-dashboard-fwd-alice@0-1-127.0.0.1:22901-127.0.0.1:47782.service: Main process exited, code=exited, status=1/FAILURE2266vm-test-run-hermes-remote> server # [   15.729862] systemd[1]: hermes-dashboard-fwd-alice@0-1-127.0.0.1:22901-127.0.0.1:47782.service: Failed with result 'exit-code'.2267vm-test-run-hermes-remote> server # [   16.766424] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47786).2268vm-test-run-hermes-remote> server # [   16.816317] microvm@hermes-alice[915]: +q6E616D65Booting initrd of NixOS 26.11 (Zokor) (Initrd).2269vm-test-run-hermes-remote> server # [   17.072362] microvm@hermes-alice[915]: [  OK  ] Created slice Slice /system/modprobe.2270vm-test-run-hermes-remote> server # [   17.079560] microvm@hermes-alice[915]: [  OK  ] Started Dispatch Password Requests to Console Directory Watch.2271vm-test-run-hermes-remote> server # [   17.083811] microvm@hermes-alice[915]: [  OK  ] Reached target Initrd Root Device.2272vm-test-run-hermes-remote> server # [   17.087455] microvm@hermes-alice[915]: [  OK  ] Reached target Path Units.2273vm-test-run-hermes-remote> server # [   17.091058] microvm@hermes-alice[915]: [  OK  ] Reached target Slice Units.2274vm-test-run-hermes-remote> server # [   17.094715] microvm@hermes-alice[915]: [  OK  ] Reached target Swaps.2275vm-test-run-hermes-remote> server # [   17.096843] microvm@hermes-alice[915]: [  OK  ] Reached target Timer Units.2276vm-test-run-hermes-remote> server # [   17.100188] microvm@hermes-alice[915]: [  OK  ] Listening on D-Bus System Message Bus Socket.2277vm-test-run-hermes-remote> server # [   17.102783] microvm@hermes-alice[915]: [  OK  ] Listening on Journal Socket (/dev/log).2278vm-test-run-hermes-remote> server # [   17.105372] microvm@hermes-alice[915]: [  OK  ] Listening on Journal Sockets.2279vm-test-run-hermes-remote> server # [   17.108367] microvm@hermes-alice[915]: [  OK  ] Listening on udev Control Socket.2280vm-test-run-hermes-remote> server # [   17.112250] microvm@hermes-alice[915]: [  OK  ] Listening on udev Kernel Socket.2281vm-test-run-hermes-remote> server # [   17.114463] microvm@hermes-alice[915]: [  OK  ] Reached target Socket Units.2282vm-test-run-hermes-remote> server # [   17.119048] microvm@hermes-alice[915]:          Starting Create List of Static Device Nodes...2283vm-test-run-hermes-remote> server # [   17.125606] microvm@hermes-alice[915]:          Starting Load Kernel Module configfs...2284vm-test-run-hermes-remote> server # [   17.143648] microvm@hermes-alice[915]:          Starting Journal Service...2285vm-test-run-hermes-remote> server # [   17.148548] microvm@hermes-alice[915]:          Starting Load Kernel Modules...2286vm-test-run-hermes-remote> server # [   17.155133] microvm@hermes-alice[915]:          Starting Coldplug All udev Devices...2287vm-test-run-hermes-remote> server # [   17.166538] microvm@hermes-alice[915]: [  OK  ] Finished Load Kernel Module configfs.2288vm-test-run-hermes-remote> server # [   17.179705] microvm@hermes-alice[915]: [  OK  ] Finished Create List of Static Device Nodes.2289vm-test-run-hermes-remote> server # [   17.198129] microvm@hermes-alice[915]:          Starting Create Static Device Nodes in /dev gracefully...2290vm-test-run-hermes-remote> server # [   17.239688] microvm@hermes-alice[915]: [  OK  ] Finished Create Static Device Nodes in /dev gracefully.2291vm-test-run-hermes-remote> server # [   17.256353] microvm@hermes-alice[915]:          Starting Create Static Device Nodes in /dev...2292vm-test-run-hermes-remote> server # [   17.288291] microvm@hermes-alice[915]: [  OK  ] Finished Create Static Device Nodes in /dev.2293vm-test-run-hermes-remote> server # [   17.296239] microvm@hermes-alice[915]: [  OK  ] Reached target Preparation for Local File Systems.2294vm-test-run-hermes-remote> server # [   17.303340] microvm@hermes-alice[915]: [  OK  ] Reached target Local File Systems.2295vm-test-run-hermes-remote> server # [   17.315065] microvm@hermes-alice[915]:          Starting Rule-based Manager for Device Events and Files...2296vm-test-run-hermes-remote> server # [   17.349212] microvm@hermes-alice[915]: [  OK  ] Finished Coldplug All udev Devices.2297vm-test-run-hermes-remote> server # [   17.352931] microvm@hermes-alice[915]: [  OK  ] Started Journal Service.2298vm-test-run-hermes-remote> server # [   17.362582] microvm@hermes-alice[915]:          Starting Create System Files and Directories...2299vm-test-run-hermes-remote> server # [   17.385266] microvm@hermes-alice[915]: [  OK  ] Finished Create System Files and Directories.2300vm-test-run-hermes-remote> server # [   17.423650] microvm@hermes-alice[915]: [  OK  ] Started Rule-based Manager for Device Events and Files.2301vm-test-run-hermes-remote> server # [   17.707099] microvm@hermes-alice[915]: [  OK  ] Finished Load Kernel Modules.2302vm-test-run-hermes-remote> server # [   17.714102] microvm@hermes-alice[915]:          Starting Apply Kernel Variables...2303vm-test-run-hermes-remote> server # [   17.724884] microvm@hermes-alice[915]:          Starting Virtual Console Setup...2304vm-test-run-hermes-remote> server # [   17.764264] microvm@hermes-alice[915]: [  OK  ] Finished Apply Kernel Variables.2305vm-test-run-hermes-remote> server # [   17.771279] microvm@hermes-alice[915]: [  OK  ] Finished Virtual Console Setup.2306vm-test-run-hermes-remote> server # [   17.777379] microvm@hermes-alice[915]: [  OK  ] Reached target System Initialization.2307vm-test-run-hermes-remote> server # [   17.780614] microvm@hermes-alice[915]: [  OK  ] Reached target Basic System.2308vm-test-run-hermes-remote> server # [   18.159677] microvm@hermes-alice[915]:          Mounting /sysroot...2309vm-test-run-hermes-remote> server # [   18.173243] microvm@hermes-alice[915]: [  OK  ] Mounted /sysroot.2310vm-test-run-hermes-remote> server # [   18.176951] microvm@hermes-alice[915]: [  OK  ] Reached target Initrd Root File System.2311vm-test-run-hermes-remote> server # [   18.180213] microvm@hermes-alice[915]:          Mounting /sysroot/nix/.ro-store...2312vm-test-run-hermes-remote> server # [   18.184373] microvm@hermes-alice[915]:          Mounting /sysroot/nix/store...2313vm-test-run-hermes-remote> server # [   18.196118] microvm@hermes-alice[915]:          Mounting /sysroot/run...2314vm-test-run-hermes-remote> server # [   18.202775] microvm@hermes-alice[915]:          Mounting /sysroot/var/lib/hermes...2315vm-test-run-hermes-remote> server # [   18.213087] microvm@hermes-alice[915]:          Starting Mountpoints Configured in the Real Root...2316vm-test-run-hermes-remote> server # [   18.216682] microvm@hermes-alice[915]: [  OK  ] Mounted /sysroot/nix/.ro-store.2317vm-test-run-hermes-remote> server # [   18.221379] microvm@hermes-alice[915]: [  OK  ] Mounted /sysroot/nix/store.2318vm-test-run-hermes-remote> server # [   18.226635] microvm@hermes-alice[915]: [  OK  ] Mounted /sysroot/var/lib/hermes.2319vm-test-run-hermes-remote> server # [   18.234343] microvm@hermes-alice[915]:          Starting nix-store-binds.service...2320vm-test-run-hermes-remote> server # [   18.238725] microvm@hermes-alice[915]: [  OK  ] Mounted /sysroot/run.2321vm-test-run-hermes-remote> server # [   18.330501] microvm@hermes-alice[915]: [  OK  ] Finished Mountpoints Configured in the Real Root.2322vm-test-run-hermes-remote> server # [   18.733237] microvm@hermes-alice[915]: [  OK  ] Finished nix-store-binds.service.2323vm-test-run-hermes-remote> server # [   18.756729] microvm@hermes-alice[915]:          Starting Find NixOS closure...2324vm-test-run-hermes-remote> server # [   18.788704] microvm@hermes-alice[915]: [  OK  ] Finished Find NixOS closure.2325vm-test-run-hermes-remote> server # [   18.799448] socat[1084]: 2026/09/25 16:36:16 socat[1084] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2326vm-test-run-hermes-remote> server # [   18.801272] systemd[1]: hermes-dashboard-fwd-alice@1-4097-127.0.0.1:22901-127.0.0.1:47786.service: Main process exited, code=exited, status=1/FAILURE2327vm-test-run-hermes-remote> server # [   18.802128] systemd[1]: hermes-dashboard-fwd-alice@1-4097-127.0.0.1:22901-127.0.0.1:47786.service: Failed with result 'exit-code'.2328vm-test-run-hermes-remote> server # [   19.495201] microvm@hermes-alice[915]:          Mounting /sysroot/run/hermes-host...2329vm-test-run-hermes-remote> server # [   19.526753] microvm@hermes-alice[915]: [  OK  ] Mounted /sysroot/run/hermes-host.2330vm-test-run-hermes-remote> server # [   19.530559] microvm@hermes-alice[915]: [  OK  ] Reached target Initrd File Systems.2331vm-test-run-hermes-remote> server # [   19.535234] microvm@hermes-alice[915]:          Starting Create Volatile Files and Directories in the Real Root...2332vm-test-run-hermes-remote> server # [   19.553475] microvm@hermes-alice[915]: [  OK  ] Finished Create Volatile Files and Directories in the Real Root.2333vm-test-run-hermes-remote> server # [   19.566353] microvm@hermes-alice[915]: [  OK  ] Reached target Initrd Default Target.2334vm-test-run-hermes-remote> server # [   19.570698] microvm@hermes-alice[915]:          Starting Cleaning Up and Shutting Down Daemons...2335vm-test-run-hermes-remote> server # [   19.583588] microvm@hermes-alice[915]: [  OK  ] Stopped target Initrd Default Target.2336vm-test-run-hermes-remote> server # [   19.587509] microvm@hermes-alice[915]: [  OK  ] Stopped target Basic System.2337vm-test-run-hermes-remote> server # [   19.591486] microvm@hermes-alice[915]: [  OK  ] Stopped target Initrd Root Device.2338vm-test-run-hermes-remote> server # [   19.595168] microvm@hermes-alice[915]: [  OK  ] Stopped target Path Units.2339vm-test-run-hermes-remote> server # [   19.598741] microvm@hermes-alice[915]: [  OK  ] Stopped target Slice Units.2340vm-test-run-hermes-remote> server # [   19.602547] microvm@hermes-alice[915]: [  OK  ] Stopped target Socket Units.2341vm-test-run-hermes-remote> server # [   19.605111] microvm@hermes-alice[915]: [  OK  ] Stopped target Timer Units.2342vm-test-run-hermes-remote> server # [   19.608049] microvm@hermes-alice[915]: [  OK  ] Closed D-Bus System Message Bus Socket.2343vm-test-run-hermes-remote> server # [   19.610309] microvm@hermes-alice[915]: [  OK  ] Stopped Find NixOS closure.2344vm-test-run-hermes-remote> server # [   19.614846] microvm@hermes-alice[915]:          Starting Load Kernel Module configfs...2345vm-test-run-hermes-remote> server # [   19.619412] microvm@hermes-alice[915]: [  OK  ] Stopped Create Volatile Files and Directories in the Real Root.2346vm-test-run-hermes-remote> server # [   19.622533] microvm@hermes-alice[915]: [  OK  ] Stopped Create System Files and Directories.2347vm-test-run-hermes-remote> server # [   19.625491] microvm@hermes-alice[915]: [  OK  ] Stopped Coldplug All udev Devices.2348vm-test-run-hermes-remote> server # [   19.631504] microvm@hermes-alice[915]:          Stopping Rule-based Manager for Device Events and Files...2349vm-test-run-hermes-remote> server # [   19.635766] microvm@hermes-alice[915]: [  OK  ] Stopped Virtual Console Setup.2350vm-test-run-hermes-remote> server # [   19.642381] microvm@hermes-alice[915]: [  OK  ] Finished Load Kernel Module configfs.2351vm-test-run-hermes-remote> server # [   19.648545] microvm@hermes-alice[915]: [  OK  ] Finished Cleaning Up and Shutting Down Daemons.2352vm-test-run-hermes-remote> server # [   19.663411] microvm@hermes-alice[915]: [  OK  ] Stopped Rule-based Manager for Device Events and Files.2353vm-test-run-hermes-remote> server # [   19.668771] microvm@hermes-alice[915]:          Starting Cleanup udev Database...2354vm-test-run-hermes-remote> server # [   19.672901] microvm@hermes-alice[915]: [  OK  ] Stopped Create Static Device Nodes in /dev.2355vm-test-run-hermes-remote> server # [   19.677462] microvm@hermes-alice[915]: [  OK  ] Stopped Create Static Device Nodes in /dev gracefully.2356vm-test-run-hermes-remote> server # [   19.690096] microvm@hermes-alice[915]: [  OK  ] Finished Cleanup udev Database.2357vm-test-run-hermes-remote> server # [   19.694426] microvm@hermes-alice[915]: [  OK  ] Reached target Switch Root.2358vm-test-run-hermes-remote> server # [   19.698914] microvm@hermes-alice[915]:          Starting NixOS Activation...2359vm-test-run-hermes-remote> server # [   19.834888] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47796).2360vm-test-run-hermes-remote> server # [   20.133594] microvm@hermes-alice[915]: [  OK  ] Finished NixOS Activation.2361vm-test-run-hermes-remote> server # [   20.137447] microvm@hermes-alice[915]:          Starting Switch Root...2362vm-test-run-hermes-remote> server # [   20.172220] microvm@hermes-alice[915]: [FAILED] Failed to start Switch Root.2363vm-test-run-hermes-remote> server # [   20.176029] microvm@hermes-alice[915]: See 'systemctl status initrd-switch-root.service' for details.2364vm-test-run-hermes-remote> server # [   20.210634] microvm@hermes-alice[915]: You are in emergency mode. After logging in, type "journalctl -xb" to view2365vm-test-run-hermes-remote> server # [   20.212404] microvm@hermes-alice[915]: syst2366vm-test-run-hermes-remote> server # [   20.214132] microvm@hermes-alice[915]: Cannot open access to console, the root account is locked.2367vm-test-run-hermes-remote> server # [   20.216704] microvm@hermes-alice[915]: See sulogin(8) man page for more details.2368vm-test-run-hermes-remote> server # [   20.217616] microvm@hermes-alice[915]:2369vm-test-run-hermes-remote> server # [   20.219093] microvm@hermes-alice[915]: Press Enter to continue.2370vm-test-run-hermes-remote> server # [   21.871491] socat[1089]: 2026/09/25 16:36:19 socat[1089] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2371vm-test-run-hermes-remote> server # [   21.874226] systemd[1]: hermes-dashboard-fwd-alice@2-8193-127.0.0.1:22901-127.0.0.1:47796.service: Main process exited, code=exited, status=1/FAILURE2372vm-test-run-hermes-remote> server # [   21.875049] systemd[1]: hermes-dashboard-fwd-alice@2-8193-127.0.0.1:22901-127.0.0.1:47796.service: Failed with result 'exit-code'.2373vm-test-run-hermes-remote> server # [   22.911248] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:47806).2374vm-test-run-hermes-remote> server # [   24.943502] socat[1094]: 2026/09/25 16:36:22 socat[1094] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2375vm-test-run-hermes-remote> server # [   24.945620] systemd[1]: hermes-dashboard-fwd-alice@3-4098-127.0.0.1:22901-127.0.0.1:47806.service: Main process exited, code=exited, status=1/FAILURE2376vm-test-run-hermes-remote> server # [   24.948075] systemd[1]: hermes-dashboard-fwd-alice@3-4098-127.0.0.1:22901-127.0.0.1:47806.service: Failed with result 'exit-code'.2377vm-test-run-hermes-remote> server # [   25.974584] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42662).2378vm-test-run-hermes-remote> server # [   28.015474] socat[1099]: 2026/09/25 16:36:26 socat[1099] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2379vm-test-run-hermes-remote> server # [   28.017889] systemd[1]: hermes-dashboard-fwd-alice@4-2-127.0.0.1:22901-127.0.0.1:42662.service: Main process exited, code=exited, status=1/FAILURE2380vm-test-run-hermes-remote> server # [   28.018687] systemd[1]: hermes-dashboard-fwd-alice@4-2-127.0.0.1:22901-127.0.0.1:42662.service: Failed with result 'exit-code'.2381vm-test-run-hermes-remote> server # [   29.051665] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42668).2382vm-test-run-hermes-remote> server # [   31.087610] socat[1104]: 2026/09/25 16:36:29 socat[1104] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2383vm-test-run-hermes-remote> server # [   31.090093] systemd[1]: hermes-dashboard-fwd-alice@5-8194-127.0.0.1:22901-127.0.0.1:42668.service: Main process exited, code=exited, status=1/FAILURE2384vm-test-run-hermes-remote> server # [   31.090977] systemd[1]: hermes-dashboard-fwd-alice@5-8194-127.0.0.1:22901-127.0.0.1:42668.service: Failed with result 'exit-code'.2385vm-test-run-hermes-remote> server # [   32.130597] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:42684).2386vm-test-run-hermes-remote> server # [   34.159528] socat[1108]: 2026/09/25 16:36:32 socat[1108] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2387vm-test-run-hermes-remote> server # [   34.161497] systemd[1]: hermes-dashboard-fwd-alice@6-4099-127.0.0.1:22901-127.0.0.1:42684.service: Main process exited, code=exited, status=1/FAILURE2388vm-test-run-hermes-remote> server # [   34.162251] systemd[1]: hermes-dashboard-fwd-alice@6-4099-127.0.0.1:22901-127.0.0.1:42684.service: Failed with result 'exit-code'.2389vm-test-run-hermes-remote> server # [   35.197684] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59446).2390vm-test-run-hermes-remote> server # [   37.231625] socat[1113]: 2026/09/25 16:36:35 socat[1113] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2391vm-test-run-hermes-remote> server # [   37.233833] systemd[1]: hermes-dashboard-fwd-alice@7-8195-127.0.0.1:22901-127.0.0.1:59446.service: Main process exited, code=exited, status=1/FAILURE2392vm-test-run-hermes-remote> server # [   37.235393] systemd[1]: hermes-dashboard-fwd-alice@7-8195-127.0.0.1:22901-127.0.0.1:59446.service: Failed with result 'exit-code'.2393vm-test-run-hermes-remote> server # [   38.271463] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59450).2394vm-test-run-hermes-remote> server # [   40.303518] socat[1118]: 2026/09/25 16:36:38 socat[1118] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2395vm-test-run-hermes-remote> server # [   40.306487] systemd[1]: hermes-dashboard-fwd-alice@8-4100-127.0.0.1:22901-127.0.0.1:59450.service: Main process exited, code=exited, status=1/FAILURE2396vm-test-run-hermes-remote> server # [   40.307303] systemd[1]: hermes-dashboard-fwd-alice@8-4100-127.0.0.1:22901-127.0.0.1:59450.service: Failed with result 'exit-code'.2397vm-test-run-hermes-remote> server # [   41.343889] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59452).2398vm-test-run-hermes-remote> server # [   43.375522] socat[1123]: 2026/09/25 16:36:41 socat[1123] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2399vm-test-run-hermes-remote> server # [   43.377703] systemd[1]: hermes-dashboard-fwd-alice@9-4101-127.0.0.1:22901-127.0.0.1:59452.service: Main process exited, code=exited, status=1/FAILURE2400vm-test-run-hermes-remote> server # [   43.380202] systemd[1]: hermes-dashboard-fwd-alice@9-4101-127.0.0.1:22901-127.0.0.1:59452.service: Failed with result 'exit-code'.2401vm-test-run-hermes-remote> server # [   44.412912] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59738).2402vm-test-run-hermes-remote> server # [   46.447510] socat[1127]: 2026/09/25 16:36:44 socat[1127] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2403vm-test-run-hermes-remote> server # [   46.449865] systemd[1]: hermes-dashboard-fwd-alice@10-3-127.0.0.1:22901-127.0.0.1:59738.service: Main process exited, code=exited, status=1/FAILURE2404vm-test-run-hermes-remote> server # [   46.450440] systemd[1]: hermes-dashboard-fwd-alice@10-3-127.0.0.1:22901-127.0.0.1:59738.service: Failed with result 'exit-code'.2405vm-test-run-hermes-remote> server # [   47.484148] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59750).2406vm-test-run-hermes-remote> server # [   49.519517] socat[1131]: 2026/09/25 16:36:47 socat[1131] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2407vm-test-run-hermes-remote> server # [   49.521676] systemd[1]: hermes-dashboard-fwd-alice@11-4102-127.0.0.1:22901-127.0.0.1:59750.service: Main process exited, code=exited, status=1/FAILURE2408vm-test-run-hermes-remote> server # [   49.524260] systemd[1]: hermes-dashboard-fwd-alice@11-4102-127.0.0.1:22901-127.0.0.1:59750.service: Failed with result 'exit-code'.2409vm-test-run-hermes-remote> server # [   50.555753] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:59762).2410vm-test-run-hermes-remote> server # [   52.591646] socat[1135]: 2026/09/25 16:36:50 socat[1135] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2411vm-test-run-hermes-remote> server # [   52.594149] systemd[1]: hermes-dashboard-fwd-alice@12-4-127.0.0.1:22901-127.0.0.1:59762.service: Main process exited, code=exited, status=1/FAILURE2412vm-test-run-hermes-remote> server # [   52.596734] systemd[1]: hermes-dashboard-fwd-alice@12-4-127.0.0.1:22901-127.0.0.1:59762.service: Failed with result 'exit-code'.2413vm-test-run-hermes-remote> server # [   53.631091] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60198).2414vm-test-run-hermes-remote> server # [   55.663711] socat[1139]: 2026/09/25 16:36:53 socat[1139] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2415vm-test-run-hermes-remote> server # [   55.665882] systemd[1]: hermes-dashboard-fwd-alice@13-4103-127.0.0.1:22901-127.0.0.1:60198.service: Main process exited, code=exited, status=1/FAILURE2416vm-test-run-hermes-remote> server # [   55.666801] systemd[1]: hermes-dashboard-fwd-alice@13-4103-127.0.0.1:22901-127.0.0.1:60198.service: Failed with result 'exit-code'.2417vm-test-run-hermes-remote> server # [   56.701140] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60208).2418vm-test-run-hermes-remote> server # [   58.735584] socat[1143]: 2026/09/25 16:36:56 socat[1143] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2419vm-test-run-hermes-remote> server # [   58.738235] systemd[1]: hermes-dashboard-fwd-alice@14-4104-127.0.0.1:22901-127.0.0.1:60208.service: Main process exited, code=exited, status=1/FAILURE2420vm-test-run-hermes-remote> server # [   58.739042] systemd[1]: hermes-dashboard-fwd-alice@14-4104-127.0.0.1:22901-127.0.0.1:60208.service: Failed with result 'exit-code'.2421vm-test-run-hermes-remote> server # [   59.781218] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60212).2422vm-test-run-hermes-remote> server # [   61.807613] socat[1147]: 2026/09/25 16:36:59 socat[1147] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2423vm-test-run-hermes-remote> server # [   61.809848] systemd[1]: hermes-dashboard-fwd-alice@15-4105-127.0.0.1:22901-127.0.0.1:60212.service: Main process exited, code=exited, status=1/FAILURE2424vm-test-run-hermes-remote> server # [   61.812524] systemd[1]: hermes-dashboard-fwd-alice@15-4105-127.0.0.1:22901-127.0.0.1:60212.service: Failed with result 'exit-code'.2425vm-test-run-hermes-remote> server # [   62.839921] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60216).2426vm-test-run-hermes-remote> server # [   64.879506] socat[1151]: 2026/09/25 16:37:02 socat[1151] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out2427vm-test-run-hermes-remote> server # [   64.882507] systemd[1]: hermes-dashboard-fwd-alice@16-4106-127.0.0.1:22901-127.0.0.1:60216.service: Main process exited, code=exited, status=1/FAILURE2428vm-test-run-hermes-remote> server # [   64.883310] systemd[1]: hermes-dashboard-fwd-alice@16-4106-127.0.0.1:22901-127.0.0.1:60216.service: Failed with result 'exit-code'.2429vm-test-run-hermes-remote> server # [   65.922038] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55228).