nixbot

1don't know how to build these paths:2  /nix/store/61a1xw80zwrbwh8lm0cw67az8ayb2kx7-vm-test-run-hermes-remote.drv3warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user4building '/nix/store/61a1xw80zwrbwh8lm0cw67az8ayb2kx7-vm-test-run-hermes-remote.drv' on nix-store.geninf.io:500515vm-test-run-hermes-remote> build01: building 61a1xw80zwrbwh8lm0cw67az8ayb2kx7-vm-test-run-hermes-remote.drv6vm-test-run-hermes-remote> Machine state will be reset. To keep it, pass --keep-machine-state7vm-test-run-hermes-remote> start all VLans8vm-test-run-hermes-remote> (finished: start all VLans, in 0.00 seconds)9vm-test-run-hermes-remote> Test will time out and terminate in 3600.0 seconds10vm-test-run-hermes-remote> run the VM test script11vm-test-run-hermes-remote> additionally exposed symbols:12vm-test-run-hermes-remote>     client, server,13vm-test-run-hermes-remote>     vlan1,14vm-test-run-hermes-remote>     start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh15vm-test-run-hermes-remote> start all VMs16vm-test-run-hermes-remote> client: starting vm17vm-test-run-hermes-remote> server: starting vm18vm-test-run-hermes-remote> server: QEMU running (pid 48)19vm-test-run-hermes-remote> client: QEMU running (pid 47)20vm-test-run-hermes-remote> client # Disk image does not exist, creating the virtualisation disk image...21vm-test-run-hermes-remote> server # Disk image does not exist, creating the virtualisation disk image...22vm-test-run-hermes-remote> client # Formatting '/build/vm-state-client/tmp.AIMqFKGxA8', fmt=raw size=107374182423vm-test-run-hermes-remote> server # Formatting '/build/vm-state-server/tmp.1RcmvSjDQB', fmt=raw size=2576980377624vm-test-run-hermes-remote> client # mke2fs 1.47.4 (6-Mar-2025)25vm-test-run-hermes-remote> server # mke2fs 1.47.4 (6-Mar-2025)26vm-test-run-hermes-remote> (finished: start all VMs, in 0.50 seconds)27vm-test-run-hermes-remote> server # Discarding device blocks:       0/6291456               done28vm-test-run-hermes-remote> server: waiting for unit multi-user.target29vm-test-run-hermes-remote> client # Discarding device blocks:      0/262144             done30vm-test-run-hermes-remote> server: waiting for the VM to finish booting31vm-test-run-hermes-remote> client # Creating filesystem with 262144 4k blocks and 65536 inodes32vm-test-run-hermes-remote> server # Creating filesystem with 6291456 4k blocks and 1572864 inodes33vm-test-run-hermes-remote> client # Filesystem UUID: b410a809-bcaa-4415-b0f7-343ca6275abb34vm-test-run-hermes-remote> server # Filesystem UUID: a48a1af0-db65-413f-9c68-2c70f419a4be35vm-test-run-hermes-remote> client # Superblock backups stored on blocks:36vm-test-run-hermes-remote> server # Superblock backups stored on blocks:37vm-test-run-hermes-remote> client # 	32768, 98304, 163840, 22937638vm-test-run-hermes-remote> server # 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,39vm-test-run-hermes-remote> client # 40vm-test-run-hermes-remote> server # 	409600041vm-test-run-hermes-remote> client # Allocating group tables: 0/8   done42vm-test-run-hermes-remote> server # 43vm-test-run-hermes-remote> client # Writing inode tables: 0/8   done44vm-test-run-hermes-remote> server # Allocating group tables:   0/192       done45vm-test-run-hermes-remote> client # Creating journal (8192 blocks): done46vm-test-run-hermes-remote> server # Writing inode tables:   0/192       done47vm-test-run-hermes-remote> client # Writing superblocks and filesystem accounting information: 0/8   done48vm-test-run-hermes-remote> server # Creating journal (32768 blocks): done49vm-test-run-hermes-remote> client # 50vm-test-run-hermes-remote> server # Writing superblocks and filesystem accounting information:   0/192       done51vm-test-run-hermes-remote> client # Virtualisation disk image created.52vm-test-run-hermes-remote> server # 53vm-test-run-hermes-remote> client # Starting virtiofs daemons...54vm-test-run-hermes-remote> server # Virtualisation disk image created.55vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)56vm-test-run-hermes-remote> server # Starting virtiofs daemons...57vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether58vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)59vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z INFO  virtiofsd] Waiting for vhost-user socket connection...60vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether61vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)62vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z INFO  virtiofsd] Waiting for vhost-user socket connection...63vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether64vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)65vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)66vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether67vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether68vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z INFO  virtiofsd] Waiting for vhost-user socket connection...69vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z INFO  virtiofsd] Waiting for vhost-user socket connection...70vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1)71vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z INFO  virtiofsd] Waiting for vhost-user socket connection...72vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z WARN  virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether73vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z INFO  virtiofsd] Client connected, servicing requests74vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z INFO  virtiofsd] Waiting for vhost-user socket connection...75vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z INFO  virtiofsd] Client connected, servicing requests76vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z INFO  virtiofsd] Client connected, servicing requests77vm-test-run-hermes-remote> client # [2026-09-25T16:36:36Z INFO  virtiofsd] Client connected, servicing requests78vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z INFO  virtiofsd] Client connected, servicing requests79vm-test-run-hermes-remote> server # [2026-09-25T16:36:36Z INFO  virtiofsd] Client connected, servicing requests80vm-test-run-hermes-remote> client # [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x413fd0c1]81vm-test-run-hermes-remote> client # [    0.000000] Linux version 6.18.53 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Mon Sep 21 13:06:06 UTC 202682vm-test-run-hermes-remote> client # [    0.000000] KASLR enabled83vm-test-run-hermes-remote> client # [    0.000000] random: crng init done84vm-test-run-hermes-remote> client # [    0.000000] Machine model: linux,dummy-virt85vm-test-run-hermes-remote> client # [    0.000000] efi: UEFI not found.86vm-test-run-hermes-remote> client # [    0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT87vm-test-run-hermes-remote> client # [    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff]88vm-test-run-hermes-remote> client # [    0.000000] NODE_DATA(0) allocated [mem 0xbfa070c0-0xbfa0a83f]89vm-test-run-hermes-remote> client # [    0.000000] Zone ranges:90vm-test-run-hermes-remote> client # [    0.000000]   DMA      [mem 0x0000000040000000-0x00000000bfffffff]91vm-test-run-hermes-remote> client # [    0.000000]   DMA32    empty92vm-test-run-hermes-remote> client # [    0.000000]   Normal   empty93vm-test-run-hermes-remote> client # [    0.000000]   Device   empty94vm-test-run-hermes-remote> client # [    0.000000] Movable zone start for each node95vm-test-run-hermes-remote> client # [    0.000000] Early memory node ranges96vm-test-run-hermes-remote> client # [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]97vm-test-run-hermes-remote> client # [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]98vm-test-run-hermes-remote> client # [    0.000000] cma: Reserved 32 MiB at 0x00000000bb80000099vm-test-run-hermes-remote> client # [    0.000000] psci: probing for conduit method from DT.100vm-test-run-hermes-remote> client # [    0.000000] psci: PSCIv1.3 detected in firmware.101vm-test-run-hermes-remote> client # [    0.000000] psci: Using standard PSCI v0.2 function IDs102vm-test-run-hermes-remote> client # [    0.000000] psci: Trusted OS migration not required103vm-test-run-hermes-remote> client # [    0.000000] psci: SMC Calling Convention v1.1104vm-test-run-hermes-remote> client # [    0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003)105vm-test-run-hermes-remote> client # [    0.000000] percpu: Embedded 76 pages/cpu s186776 r8192 d116328 u311296106vm-test-run-hermes-remote> client # [    0.000000] Detected PIPT I-cache on CPU0107vm-test-run-hermes-remote> client # [    0.000000] CPU features: detected: GICv3 CPU interface108vm-test-run-hermes-remote> client # [    0.000000] CPU features: detected: Spectre-v4109vm-test-run-hermes-remote> client # [    0.000000] CPU features: detected: Spectre-BHB110vm-test-run-hermes-remote> client # [    0.000000] CPU features: kernel page table isolation forced ON by KASLR111vm-test-run-hermes-remote> client # [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)112vm-test-run-hermes-remote> client # [    0.000000] CPU features: detected: ARM erratum 1418040113vm-test-run-hermes-remote> client # [    0.000000] CPU features: detected: Broken broadcast TLBI completion114vm-test-run-hermes-remote> client # [    0.000000] CPU features: detected: SSBS not fully self-synchronizing115vm-test-run-hermes-remote> client # [    0.000000] alternatives: applying boot alternatives116vm-test-run-hermes-remote> client # [    0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/k5xq0s35yf4bjp9pgsil53xi6vwd0h1j-nixos-system-client-test/init regInfo=/nix/.ro-store/3rhma4wiybazbn2qz9qz4chy3023ypd4-closure-info/registration console=ttyAMA0,115200n8 console=tty0117vm-test-run-hermes-remote> client # [    0.000000] Unknown kernel command line parameters "regInfo=/nix/.ro-store/3rhma4wiybazbn2qz9qz4chy3023ypd4-closure-info/registration", will be passed to user space.118vm-test-run-hermes-remote> client # [    0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes119vm-test-run-hermes-remote> client # [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)120vm-test-run-hermes-remote> client # [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)121vm-test-run-hermes-remote> client # [    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB122vm-test-run-hermes-remote> client # [    0.000000] software IO TLB: area num 2.123vm-test-run-hermes-remote> client # [    0.000000] software IO TLB: mapped [mem 0x00000000bb400000-0x00000000bb600000] (2MB)124vm-test-run-hermes-remote> client # [    0.000000] Fallback order for Node 0: 0125vm-test-run-hermes-remote> client # [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 524288126vm-test-run-hermes-remote> client # [    0.000000] Policy zone: DMA127vm-test-run-hermes-remote> client # [    0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off128vm-test-run-hermes-remote> client # [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1129vm-test-run-hermes-remote> client # [    0.000000] allocated 4194304 bytes of page_ext130vm-test-run-hermes-remote> client # [    0.000000] ftrace: allocating 74963 entries in 294 pages131vm-test-run-hermes-remote> client # [    0.000000] ftrace: allocated 294 pages with 4 groups132vm-test-run-hermes-remote> client # [    0.000000] rcu: Hierarchical RCU implementation.133vm-test-run-hermes-remote> client # [    0.000000] rcu: 	RCU event tracing is enabled.134vm-test-run-hermes-remote> client # [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2.135vm-test-run-hermes-remote> client # [    0.000000] 	Trampoline variant of Tasks RCU enabled.136vm-test-run-hermes-remote> client # [    0.000000] 	Rude variant of Tasks RCU enabled.137vm-test-run-hermes-remote> client # [    0.000000] 	Tracing variant of Tasks RCU enabled.138vm-test-run-hermes-remote> client # [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.139vm-test-run-hermes-remote> client # [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2140vm-test-run-hermes-remote> client # [    0.000000] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.141vm-test-run-hermes-remote> client # [    0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.142vm-test-run-hermes-remote> client # [    0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.143vm-test-run-hermes-remote> client # [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0144vm-test-run-hermes-remote> client # [    0.000000] GICv3: 256 SPIs implemented145vm-test-run-hermes-remote> client # [    0.000000] GICv3: 0 Extended SPIs implemented146vm-test-run-hermes-remote> client # [    0.000000] Root IRQ handler: gic_handle_irq147vm-test-run-hermes-remote> client # [    0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI148vm-test-run-hermes-remote> client # [    0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0149vm-test-run-hermes-remote> client # [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000150vm-test-run-hermes-remote> client # [    0.000000] ITS [mem 0x08080000-0x0809ffff]151vm-test-run-hermes-remote> client # [    0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44b10000 (indirect, esz 8, psz 64K, shr 1)152vm-test-run-hermes-remote> client # [    0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44b20000 (flat, esz 8, psz 64K, shr 1)153vm-test-run-hermes-remote> client # [    0.000000] GICv3: using LPI property table @0x0000000044b30000154vm-test-run-hermes-remote> client # [    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044b40000155vm-test-run-hermes-remote> client # [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.156vm-test-run-hermes-remote> client # [    0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns157vm-test-run-hermes-remote> client # [    0.000000] arch_timer: Enabling local workaround for ARM erratum 1418040158vm-test-run-hermes-remote> client # [    0.000000] arch_timer: cp15 timer running at 25.00MHz (virt).159vm-test-run-hermes-remote> client # [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns160vm-test-run-hermes-remote> client # [    0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns161vm-test-run-hermes-remote> client # [    0.000053] arm-pv: using stolen time PV162vm-test-run-hermes-remote> client # [    0.000326] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)163vm-test-run-hermes-remote> client # [    0.000586] Console: colour dummy device 80x25164vm-test-run-hermes-remote> client # [    0.000603] printk: legacy console [tty0] enabled165vm-test-run-hermes-remote> client # [    0.000822] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)166vm-test-run-hermes-remote> client # [    0.000827] pid_max: default: 32768 minimum: 301167vm-test-run-hermes-remote> client # [    0.000900] LSM: initializing lsm=capability,landlock,yama,bpf,ima168vm-test-run-hermes-remote> client # [    0.001025] landlock: Up and running.169vm-test-run-hermes-remote> client # [    0.001027] Yama: becoming mindful.170vm-test-run-hermes-remote> client # [    0.001356] LSM support for eBPF active171vm-test-run-hermes-remote> client # [    0.001530] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)172vm-test-run-hermes-remote> client # [    0.001564] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)173vm-test-run-hermes-remote> client # [    0.004143] rcu: Hierarchical SRCU implementation.174vm-test-run-hermes-remote> client # [    0.004148] rcu: 	Max phase no-delay instances is 1000.175vm-test-run-hermes-remote> client # [    0.004284] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level176vm-test-run-hermes-remote> client # [    0.005094] fsl-mc MSI: its@8080000 domain created177vm-test-run-hermes-remote> client # [    0.005286] EFI services will not be available.178vm-test-run-hermes-remote> client # [    0.005424] smp: Bringing up secondary CPUs ...179vm-test-run-hermes-remote> client # [    0.012378] Detected PIPT I-cache on CPU1180vm-test-run-hermes-remote> client # [    0.012449] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000181vm-test-run-hermes-remote> client # [    0.012513] GICv3: CPU1: using allocated LPI pending table @0x0000000044b50000182vm-test-run-hermes-remote> client # [    0.012548] arch_timer: Enabling local workaround for ARM erratum 1418040183vm-test-run-hermes-remote> client # [    0.012585] CPU1: Booted secondary processor 0x0000000001 [0x413fd0c1]184vm-test-run-hermes-remote> client # [    0.012982] smp: Brought up 1 node, 2 CPUs185vm-test-run-hermes-remote> client # [    0.012999] SMP: Total of 2 processors activated.186vm-test-run-hermes-remote> client # [    0.013001] CPU: All CPU(s) started at EL1187vm-test-run-hermes-remote> client # [    0.013013] CPU features: detected: 32-bit EL0 Support188vm-test-run-hermes-remote> client # [    0.013015] CPU features: detected: Data cache clean to the PoU not required for I/D coherence189vm-test-run-hermes-remote> client # [    0.013018] CPU features: detected: Common not Private translations190vm-test-run-hermes-remote> client # [    0.013021] CPU features: detected: CRC32 instructions191vm-test-run-hermes-remote> client # [    0.013022] CPU features: detected: Data cache clean to Point of Persistence192vm-test-run-hermes-remote> client # [    0.013025] CPU features: detected: Enhanced Virtualization Traps193vm-test-run-hermes-remote> client # [    0.013035] CPU features: detected: RCpc load-acquire (LDAPR)194vm-test-run-hermes-remote> client # [    0.013037] CPU features: detected: LSE atomic instructions195vm-test-run-hermes-remote> client # [    0.013039] CPU features: detected: Privileged Access Never196vm-test-run-hermes-remote> client # [    0.013041] CPU features: detected: PMUv3197vm-test-run-hermes-remote> client # [    0.013042] CPU features: detected: RAS Extension Support198vm-test-run-hermes-remote> client # [    0.013046] CPU features: detected: Speculative Store Bypassing Safe (SSBS)199vm-test-run-hermes-remote> client # [    0.013120] alternatives: applying system-wide alternatives200vm-test-run-hermes-remote> client # [    0.014509] CPU features: detected: Hardware dirty bit management on CPU0-1201vm-test-run-hermes-remote> client # [    0.014737] Memory: 1915384K/2097152K available (24448K kernel code, 7094K rwdata, 26592K rodata, 4736K init, 1107K bss, 137264K reserved, 32768K cma-reserved)202vm-test-run-hermes-remote> client # [    0.015981] devtmpfs: initialized203vm-test-run-hermes-remote> client # [    0.017805] posixtimers hash table entries: 1024 (order: 2, 16384 bytes, linear)204vm-test-run-hermes-remote> client # [    0.017843] futex hash table entries: 512 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear).205vm-test-run-hermes-remote> client # [    0.017979] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL206vm-test-run-hermes-remote> client # [    0.017982] 0 pages in range for non-PLT usage207vm-test-run-hermes-remote> client # [    0.017983] 508224 pages in range for PLT usage208vm-test-run-hermes-remote> client # [    0.018114] pinctrl core: initialized pinctrl subsystem209vm-test-run-hermes-remote> client # [    0.018891] DMI not present or invalid.210vm-test-run-hermes-remote> client # [    0.022045] NET: Registered PF_NETLINK/PF_ROUTE protocol family211vm-test-run-hermes-remote> client # [    0.024422] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations212vm-test-run-hermes-remote> client # [    0.024554] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations213vm-test-run-hermes-remote> client # [    0.024726] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations214vm-test-run-hermes-remote> client # [    0.024741] audit: initializing netlink subsys (disabled)215vm-test-run-hermes-remote> client # [    0.024899] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1216vm-test-run-hermes-remote> client # [    0.025344] thermal_sys: Registered thermal governor 'fair_share'217vm-test-run-hermes-remote> client # [    0.025346] thermal_sys: Registered thermal governor 'bang_bang'218vm-test-run-hermes-remote> client # [    0.025350] thermal_sys: Registered thermal governor 'step_wise'219vm-test-run-hermes-remote> client # [    0.025352] thermal_sys: Registered thermal governor 'user_space'220vm-test-run-hermes-remote> client # [    0.025354] thermal_sys: Registered thermal governor 'power_allocator'221vm-test-run-hermes-remote> client # [    0.025378] cpuidle: using governor ladder222vm-test-run-hermes-remote> client # [    0.025384] cpuidle: using governor menu223vm-test-run-hermes-remote> client # [    0.025496] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.224vm-test-run-hermes-remote> client # [    0.025556] ASID allocator initialised with 32768 entries225vm-test-run-hermes-remote> client # [    0.026222] Serial: AMBA PL011 UART driver226vm-test-run-hermes-remote> client # [    0.029640] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1227vm-test-run-hermes-remote> client # [    0.029869] printk: console [ttyAMA0] enabled228vm-test-run-hermes-remote> client # [    0.048237] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages229vm-test-run-hermes-remote> client # [    0.048243] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page230vm-test-run-hermes-remote> client # [    0.048246] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages231vm-test-run-hermes-remote> client # [    0.048248] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page232vm-test-run-hermes-remote> client # [    0.048250] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages233vm-test-run-hermes-remote> client # [    0.048252] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page234vm-test-run-hermes-remote> client # [    0.048254] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages235vm-test-run-hermes-remote> client # [    0.048256] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page236vm-test-run-hermes-remote> client # [    0.057097] fbcon: Taking over console237vm-test-run-hermes-remote> client # [    0.057114] ACPI: Interpreter disabled.238vm-test-run-hermes-remote> client # [    0.060269] iommu: Default domain type: Translated239vm-test-run-hermes-remote> client # [    0.060274] iommu: DMA domain TLB invalidation policy: strict mode240vm-test-run-hermes-remote> client # [    0.062312] SCSI subsystem initialized241vm-test-run-hermes-remote> client # [    0.062604] usbcore: registered new interface driver usbfs242vm-test-run-hermes-remote> client # [    0.062630] usbcore: registered new interface driver hub243vm-test-run-hermes-remote> client # [    0.062639] usbcore: registered new device driver usb244vm-test-run-hermes-remote> client # [    0.062861] pps_core: LinuxPPS API ver. 1 registered245vm-test-run-hermes-remote> client # [    0.062864] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>246vm-test-run-hermes-remote> client # [    0.062869] PTP clock support registered247vm-test-run-hermes-remote> client # [    0.062890] EDAC MC: Ver: 3.0.0248vm-test-run-hermes-remote> client # [    0.063081] scmi_core: SCMI protocol bus registered249vm-test-run-hermes-remote> client # [    0.064416] FPGA manager framework250vm-test-run-hermes-remote> client # [    0.067028] vgaarb: loaded251vm-test-run-hermes-remote> client # [    0.069125] clocksource: Switched to clocksource arch_sys_counter252vm-test-run-hermes-remote> client # [    0.069667] VFS: Disk quotas dquot_6.6.0253vm-test-run-hermes-remote> client # [    0.069687] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)254vm-test-run-hermes-remote> client # [    0.071707] netfs: FS-Cache loaded255vm-test-run-hermes-remote> client # [    0.071828] pnp: PnP ACPI: disabled256vm-test-run-hermes-remote> client # [    0.073684] NET: Registered PF_INET protocol family257vm-test-run-hermes-remote> client # [    0.073975] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)258vm-test-run-hermes-remote> client # [    0.100328] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)259vm-test-run-hermes-remote> client # [    0.100357] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)260vm-test-run-hermes-remote> client # [    0.100371] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)261vm-test-run-hermes-remote> client # [    0.100442] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)262vm-test-run-hermes-remote> client # [    0.100572] TCP: Hash tables configured (established 16384 bind 16384)263vm-test-run-hermes-remote> client # [    0.100698] MPTCP token hash table entries: 2048 (order: 4, 49152 bytes, linear)264vm-test-run-hermes-remote> client # [    0.100727] UDP hash table entries: 1024 (order: 4, 65536 bytes, linear)265vm-test-run-hermes-remote> client # [    0.100760] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes, linear)266vm-test-run-hermes-remote> client # [    0.100937] NET: Registered PF_UNIX/PF_LOCAL protocol family267vm-test-run-hermes-remote> client # [    0.101001] NET: Registered PF_XDP protocol family268vm-test-run-hermes-remote> client # [    0.101036] PCI: CLS 0 bytes, default 64269vm-test-run-hermes-remote> client # [    0.101287] Trying to unpack rootfs image as initramfs...270vm-test-run-hermes-remote> client # [    0.113435] kvm [1]: HYP mode not available271vm-test-run-hermes-remote> server # [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x413fd0c1]272vm-test-run-hermes-remote> server # [    0.000000] Linux version 6.18.53 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Mon Sep 21 13:06:06 UTC 2026273vm-test-run-hermes-remote> server # [    0.000000] KASLR enabled274vm-test-run-hermes-remote> server # [    0.000000] random: crng init done275vm-test-run-hermes-remote> server # [    0.000000] Machine model: linux,dummy-virt276vm-test-run-hermes-remote> server # [    0.000000] efi: UEFI not found.277vm-test-run-hermes-remote> server # [    0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT278vm-test-run-hermes-remote> server # [    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000023fffffff]279vm-test-run-hermes-remote> server # [    0.000000] NODE_DATA(0) allocated [mem 0x23ee00580-0x23ee03cff]280vm-test-run-hermes-remote> server # [    0.000000] Zone ranges:281vm-test-run-hermes-remote> server # [    0.000000]   DMA      [mem 0x0000000040000000-0x00000000ffffffff]282vm-test-run-hermes-remote> server # [    0.000000]   DMA32    empty283vm-test-run-hermes-remote> server # [    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fffffff]284vm-test-run-hermes-remote> server # [    0.000000]   Device   empty285vm-test-run-hermes-remote> server # [    0.000000] Movable zone start for each node286vm-test-run-hermes-remote> server # [    0.000000] Early memory node ranges287vm-test-run-hermes-remote> server # [    0.000000]   node   0: [mem 0x0000000040000000-0x000000023fffffff]288vm-test-run-hermes-remote> server # [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000023fffffff]289vm-test-run-hermes-remote> server # [    0.000000] cma: Reserved 32 MiB at 0x00000000fe000000290vm-test-run-hermes-remote> server # [    0.000000] psci: probing for conduit method from DT.291vm-test-run-hermes-remote> server # [    0.000000] psci: PSCIv1.3 detected in firmware.292vm-test-run-hermes-remote> server # [    0.000000] psci: Using standard PSCI v0.2 function IDs293vm-test-run-hermes-remote> server # [    0.000000] psci: Trusted OS migration not required294vm-test-run-hermes-remote> server # [    0.000000] psci: SMC Calling Convention v1.1295vm-test-run-hermes-remote> server # [    0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003)296vm-test-run-hermes-remote> server # [    0.000000] percpu: Embedded 76 pages/cpu s186776 r8192 d116328 u311296297vm-test-run-hermes-remote> server # [    0.000000] Detected PIPT I-cache on CPU0298vm-test-run-hermes-remote> client # [    0.241917] Initialise system trusted keyrings299vm-test-run-hermes-remote> server # [    0.000000] CPU features: detected: GICv3 CPU interface300vm-test-run-hermes-remote> server # [    0.000000] CPU features: detected: Spectre-v4301vm-test-run-hermes-remote> server # [    0.000000] CPU features: detected: Spectre-BHB302vm-test-run-hermes-remote> server # [    0.000000] CPU features: kernel page table isolation forced ON by KASLR303vm-test-run-hermes-remote> server # [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)304vm-test-run-hermes-remote> server # [    0.000000] CPU features: detected: ARM erratum 1418040305vm-test-run-hermes-remote> server # [    0.000000] CPU features: detected: Broken broadcast TLBI completion306vm-test-run-hermes-remote> client # [    0.245584] workingset: timestamp_bits=42 max_order=19 bucket_order=0307vm-test-run-hermes-remote> server # [    0.000000] CPU features: detected: SSBS not fully self-synchronizing308vm-test-run-hermes-remote> client # [    0.246145] squashfs: version 4.0 (2009/01/31) Phillip Lougher309vm-test-run-hermes-remote> server # [    0.000000] alternatives: applying boot alternatives310vm-test-run-hermes-remote> client # [    0.246191] 9p: Installing v9fs 9p2000 file system support311vm-test-run-hermes-remote> server # [    0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/dqbdqwjz05d8cjz1drbbf16a43l6hdaf-nixos-system-server-test/init regInfo=/nix/.ro-store/nllaz4lwdfw93lp0lqlrf8qbwgx3sf5g-closure-info/registration console=ttyAMA0,115200n8 console=tty0312vm-test-run-hermes-remote> server # [    0.000000] Unknown kernel command line parameters "regInfo=/nix/.ro-store/nllaz4lwdfw93lp0lqlrf8qbwgx3sf5g-closure-info/registration", will be passed to user space.313vm-test-run-hermes-remote> server # [    0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes314vm-test-run-hermes-remote> server # [    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)315vm-test-run-hermes-remote> server # [    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)316vm-test-run-hermes-remote> server # [    0.000000] software IO TLB: area num 4.317vm-test-run-hermes-remote> server # [    0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)318vm-test-run-hermes-remote> server # [    0.000000] Fallback order for Node 0: 0319vm-test-run-hermes-remote> server # [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2097152320vm-test-run-hermes-remote> server # [    0.000000] Policy zone: Normal321vm-test-run-hermes-remote> server # [    0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off322vm-test-run-hermes-remote> server # [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1323vm-test-run-hermes-remote> client # [    0.258816] Key type asymmetric registered324vm-test-run-hermes-remote> server # [    0.000000] allocated 16777216 bytes of page_ext325vm-test-run-hermes-remote> client # [    0.258834] Asymmetric key parser 'x509' registered326vm-test-run-hermes-remote> server # [    0.000000] ftrace: allocating 74963 entries in 294 pages327vm-test-run-hermes-remote> client # [    0.258961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)328vm-test-run-hermes-remote> server # [    0.000000] ftrace: allocated 294 pages with 4 groups329vm-test-run-hermes-remote> server # [    0.000000] rcu: Hierarchical RCU implementation.330vm-test-run-hermes-remote> server # [    0.000000] rcu: 	RCU event tracing is enabled.331vm-test-run-hermes-remote> server # [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=4.332vm-test-run-hermes-remote> server # [    0.000000] 	Trampoline variant of Tasks RCU enabled.333vm-test-run-hermes-remote> server # [    0.000000] 	Rude variant of Tasks RCU enabled.334vm-test-run-hermes-remote> server # [    0.000000] 	Tracing variant of Tasks RCU enabled.335vm-test-run-hermes-remote> client # [    0.262524] io scheduler mq-deadline registered336vm-test-run-hermes-remote> server # [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.337vm-test-run-hermes-remote> client # [    0.262531] io scheduler kyber registered338vm-test-run-hermes-remote> server # [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4339vm-test-run-hermes-remote> server # [    0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.340vm-test-run-hermes-remote> server # [    0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.341vm-test-run-hermes-remote> server # [    0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.342vm-test-run-hermes-remote> server # [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0343vm-test-run-hermes-remote> server # [    0.000000] GICv3: 256 SPIs implemented344vm-test-run-hermes-remote> client # [    0.268938] pl061_gpio 9030000.pl061: PL061 GPIO chip registered345vm-test-run-hermes-remote> server # [    0.000000] GICv3: 0 Extended SPIs implemented346vm-test-run-hermes-remote> server # [    0.000000] Root IRQ handler: gic_handle_irq347vm-test-run-hermes-remote> server # [    0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI348vm-test-run-hermes-remote> server # [    0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0349vm-test-run-hermes-remote> server # [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000350vm-test-run-hermes-remote> server # [    0.000000] ITS [mem 0x08080000-0x0809ffff]351vm-test-run-hermes-remote> server # [    0.000000] ITS@0x0000000008080000: allocated 8192 Devices @101310000 (indirect, esz 8, psz 64K, shr 1)352vm-test-run-hermes-remote> client # [    0.269758] ledtrig-cpu: registered to indicate activity on CPUs353vm-test-run-hermes-remote> server # [    0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @101320000 (flat, esz 8, psz 64K, shr 1)354vm-test-run-hermes-remote> client # [    0.270462] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges:355vm-test-run-hermes-remote> server # [    0.000000] GICv3: using LPI property table @0x0000000101330000356vm-test-run-hermes-remote> server # [    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000101350000357vm-test-run-hermes-remote> client # [    0.270485] pci-host-generic 4010000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000358vm-test-run-hermes-remote> server # [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.359vm-test-run-hermes-remote> client # [    0.270499] pci-host-generic 4010000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000360vm-test-run-hermes-remote> server # [    0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns361vm-test-run-hermes-remote> client # [    0.270504] pci-host-generic 4010000000.pcie:      MEM 0x8000000000..0xffffffffff -> 0x8000000000362vm-test-run-hermes-remote> server # [    0.000000] arch_timer: Enabling local workaround for ARM erratum 1418040363vm-test-run-hermes-remote> client # [    0.270541] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits364vm-test-run-hermes-remote> server # [    0.000000] arch_timer: cp15 timer running at 25.00MHz (virt).365vm-test-run-hermes-remote> client # [    0.270569] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]366vm-test-run-hermes-remote> server # [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns367vm-test-run-hermes-remote> client # [    0.270683] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00368vm-test-run-hermes-remote> server # [    0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns369vm-test-run-hermes-remote> server # [    0.000055] arm-pv: using stolen time PV370vm-test-run-hermes-remote> client # [    0.270699] pci_bus 0000:00: root bus resource [bus 00-ff]371vm-test-run-hermes-remote> client # [    0.270703] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]372vm-test-run-hermes-remote> server # [    0.000352] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)373vm-test-run-hermes-remote> server # [    0.000627] Console: colour dummy device 80x25374vm-test-run-hermes-remote> client # [    0.270705] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]375vm-test-run-hermes-remote> server # [    0.000643] printk: legacy console [tty0] enabled376vm-test-run-hermes-remote> client # [    0.270708] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]377vm-test-run-hermes-remote> server # [    0.000860] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)378vm-test-run-hermes-remote> client # [    0.270832] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint379vm-test-run-hermes-remote> server # [    0.000865] pid_max: default: 32768 minimum: 301380vm-test-run-hermes-remote> server # [    0.000943] LSM: initializing lsm=capability,landlock,yama,bpf,ima381vm-test-run-hermes-remote> server # [    0.001060] landlock: Up and running.382vm-test-run-hermes-remote> client # [    0.271318] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint383vm-test-run-hermes-remote> server # [    0.001062] Yama: becoming mindful.384vm-test-run-hermes-remote> client # [    0.271465] pci 0000:00:01.0: BAR 0 [io  0x0000-0x001f]385vm-test-run-hermes-remote> server # [    0.001416] LSM support for eBPF active386vm-test-run-hermes-remote> client # [    0.271475] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]387vm-test-run-hermes-remote> server # [    0.001692] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)388vm-test-run-hermes-remote> client # [    0.271497] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]389vm-test-run-hermes-remote> client # [    0.271508] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref]390vm-test-run-hermes-remote> server # [    0.001820] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)391vm-test-run-hermes-remote> server # [    0.004484] rcu: Hierarchical SRCU implementation.392vm-test-run-hermes-remote> client # [    0.271863] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint393vm-test-run-hermes-remote> server # [    0.004490] rcu: 	Max phase no-delay instances is 1000.394vm-test-run-hermes-remote> client # [    0.272002] pci 0000:00:02.0: BAR 0 [io  0x0000-0x001f]395vm-test-run-hermes-remote> server # [    0.004634] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level396vm-test-run-hermes-remote> client # [    0.272012] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff]397vm-test-run-hermes-remote> server # [    0.005455] fsl-mc MSI: its@8080000 domain created398vm-test-run-hermes-remote> client # [    0.272032] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]399vm-test-run-hermes-remote> server # [    0.005653] EFI services will not be available.400vm-test-run-hermes-remote> server # [    0.005854] smp: Bringing up secondary CPUs ...401vm-test-run-hermes-remote> client # [    0.272393] pci 0000:00:03.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint402vm-test-run-hermes-remote> server # [    0.024980] Detected PIPT I-cache on CPU1403vm-test-run-hermes-remote> client # [    0.272531] pci 0000:00:03.0: BAR 0 [io  0x0000-0x007f]404vm-test-run-hermes-remote> server # [    0.025058] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000405vm-test-run-hermes-remote> client # [    0.272541] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]406vm-test-run-hermes-remote> server # [    0.025122] GICv3: CPU1: using allocated LPI pending table @0x0000000101360000407vm-test-run-hermes-remote> client # [    0.272562] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]408vm-test-run-hermes-remote> server # [    0.025158] arch_timer: Enabling local workaround for ARM erratum 1418040409vm-test-run-hermes-remote> client # [    0.272914] pci 0000:00:04.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint410vm-test-run-hermes-remote> server # [    0.025194] CPU1: Booted secondary processor 0x0000000001 [0x413fd0c1]411vm-test-run-hermes-remote> client # [    0.273051] pci 0000:00:04.0: BAR 0 [io  0x0000-0x001f]412vm-test-run-hermes-remote> server # [    0.044908] Detected PIPT I-cache on CPU2413vm-test-run-hermes-remote> client # [    0.273061] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff]414vm-test-run-hermes-remote> server # [    0.045003] GICv3: CPU2: found redistributor 2 region 0:0x00000000080e0000415vm-test-run-hermes-remote> server # [    0.045075] GICv3: CPU2: using allocated LPI pending table @0x0000000101370000416vm-test-run-hermes-remote> server # [    0.045115] arch_timer: Enabling local workaround for ARM erratum 1418040417vm-test-run-hermes-remote> client # [    0.273082] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]418vm-test-run-hermes-remote> server # [    0.045152] CPU2: Booted secondary processor 0x0000000002 [0x413fd0c1]419vm-test-run-hermes-remote> server # [    0.065026] Detected PIPT I-cache on CPU3420vm-test-run-hermes-remote> server # [    0.065133] GICv3: CPU3: found redistributor 3 region 0:0x0000000008100000421vm-test-run-hermes-remote> client # [    0.273092] pci 0000:00:04.0: ROM [mem 0x00000000-0x0003ffff pref]422vm-test-run-hermes-remote> server # [    0.065200] GICv3: CPU3: using allocated LPI pending table @0x0000000101380000423vm-test-run-hermes-remote> server # [    0.065236] arch_timer: Enabling local workaround for ARM erratum 1418040424vm-test-run-hermes-remote> server # [    0.065269] CPU3: Booted secondary processor 0x0000000003 [0x413fd0c1]425vm-test-run-hermes-remote> server # [    0.065897] smp: Brought up 1 node, 4 CPUs426vm-test-run-hermes-remote> client # [    0.273555] pci 0000:00:05.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint427vm-test-run-hermes-remote> server # [    0.065935] SMP: Total of 4 processors activated.428vm-test-run-hermes-remote> server # [    0.065937] CPU: All CPU(s) started at EL1429vm-test-run-hermes-remote> server # [    0.065953] CPU features: detected: 32-bit EL0 Support430vm-test-run-hermes-remote> client # [    0.273780] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff]431vm-test-run-hermes-remote> server # [    0.065957] CPU features: detected: Data cache clean to the PoU not required for I/D coherence432vm-test-run-hermes-remote> server # [    0.065961] CPU features: detected: Common not Private translations433vm-test-run-hermes-remote> server # [    0.065964] CPU features: detected: CRC32 instructions434vm-test-run-hermes-remote> server # [    0.065967] CPU features: detected: Data cache clean to Point of Persistence435vm-test-run-hermes-remote> client # [    0.273803] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]436vm-test-run-hermes-remote> server # [    0.065971] CPU features: detected: Enhanced Virtualization Traps437vm-test-run-hermes-remote> server # [    0.065982] CPU features: detected: RCpc load-acquire (LDAPR)438vm-test-run-hermes-remote> server # [    0.065985] CPU features: detected: LSE atomic instructions439vm-test-run-hermes-remote> server # [    0.065988] CPU features: detected: Privileged Access Never440vm-test-run-hermes-remote> server # [    0.065991] CPU features: detected: PMUv3441vm-test-run-hermes-remote> client # [    0.274321] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint442vm-test-run-hermes-remote> server # [    0.065993] CPU features: detected: RAS Extension Support443vm-test-run-hermes-remote> server # [    0.065997] CPU features: detected: Speculative Store Bypassing Safe (SSBS)444vm-test-run-hermes-remote> server # [    0.066082] alternatives: applying system-wide alternatives445vm-test-run-hermes-remote> client # [    0.274567] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff]446vm-test-run-hermes-remote> server # [    0.067648] CPU features: detected: Hardware dirty bit management on CPU0-3447vm-test-run-hermes-remote> server # [    0.067949] Memory: 8007820K/8388608K available (24448K kernel code, 7094K rwdata, 26592K rodata, 4736K init, 1107K bss, 321932K reserved, 32768K cma-reserved)448vm-test-run-hermes-remote> server # [    0.070162] devtmpfs: initialized449vm-test-run-hermes-remote> client # [    0.274624] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]450vm-test-run-hermes-remote> server # [    0.076321] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)451vm-test-run-hermes-remote> server # [    0.076430] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).452vm-test-run-hermes-remote> server # [    0.076652] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL453vm-test-run-hermes-remote> server # [    0.076657] 0 pages in range for non-PLT usage454vm-test-run-hermes-remote> server # [    0.076658] 508224 pages in range for PLT usage455vm-test-run-hermes-remote> server # [    0.076830] pinctrl core: initialized pinctrl subsystem456vm-test-run-hermes-remote> server # [    0.078095] DMI not present or invalid.457vm-test-run-hermes-remote> server # [    0.083109] NET: Registered PF_NETLINK/PF_ROUTE protocol family458vm-test-run-hermes-remote> server # [    0.086846] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations459vm-test-run-hermes-remote> server # [    0.087009] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations460vm-test-run-hermes-remote> client # [    0.275072] pci 0000:00:07.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint461vm-test-run-hermes-remote> server # [    0.089675] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations462vm-test-run-hermes-remote> server # [    0.089707] audit: initializing netlink subsys (disabled)463vm-test-run-hermes-remote> server # [    0.090240] audit: type=2000 audit(0.084:1): state=initialized audit_enabled=0 res=1464vm-test-run-hermes-remote> client # [    0.275361] pci 0000:00:07.0: BAR 0 [mem 0x00000000-0x00000fff]465vm-test-run-hermes-remote> server # [    0.090914] thermal_sys: Registered thermal governor 'fair_share'466vm-test-run-hermes-remote> server # [    0.090919] thermal_sys: Registered thermal governor 'bang_bang'467vm-test-run-hermes-remote> server # [    0.090925] thermal_sys: Registered thermal governor 'step_wise'468vm-test-run-hermes-remote> server # [    0.090928] thermal_sys: Registered thermal governor 'user_space'469vm-test-run-hermes-remote> server # [    0.090930] thermal_sys: Registered thermal governor 'power_allocator'470vm-test-run-hermes-remote> client # [    0.275683] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint471vm-test-run-hermes-remote> server # [    0.090993] cpuidle: using governor ladder472vm-test-run-hermes-remote> server # [    0.091026] cpuidle: using governor menu473vm-test-run-hermes-remote> server # [    0.091218] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.474vm-test-run-hermes-remote> server # [    0.091378] ASID allocator initialised with 32768 entries475vm-test-run-hermes-remote> client # [    0.275904] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff]476vm-test-run-hermes-remote> server # [    0.092504] Serial: AMBA PL011 UART driver477vm-test-run-hermes-remote> server # [    0.099576] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1478vm-test-run-hermes-remote> server # [    0.099813] printk: console [ttyAMA0] enabled479vm-test-run-hermes-remote> server # [    0.104246] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages480vm-test-run-hermes-remote> server # [    0.104270] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page481vm-test-run-hermes-remote> client # [    0.275925] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]482vm-test-run-hermes-remote> server # [    0.104277] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages483vm-test-run-hermes-remote> server # [    0.104283] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page484vm-test-run-hermes-remote> client # [    0.276451] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint485vm-test-run-hermes-remote> server # [    0.104289] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages486vm-test-run-hermes-remote> client # [    0.276633] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff]487vm-test-run-hermes-remote> server # [    0.104294] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page488vm-test-run-hermes-remote> client # [    0.276654] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]489vm-test-run-hermes-remote> server # [    0.104300] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages490vm-test-run-hermes-remote> server # [    0.104305] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page491vm-test-run-hermes-remote> client # [    0.277474] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint492vm-test-run-hermes-remote> server # [    0.112206] fbcon: Taking over console493vm-test-run-hermes-remote> server # [    0.112255] ACPI: Interpreter disabled.494vm-test-run-hermes-remote> server # [    0.114882] iommu: Default domain type: Translated495vm-test-run-hermes-remote> server # [    0.114896] iommu: DMA domain TLB invalidation policy: strict mode496vm-test-run-hermes-remote> server # [    0.117111] SCSI subsystem initialized497vm-test-run-hermes-remote> client # [    0.277763] pci 0000:00:0a.0: BAR 1 [mem 0x00000000-0x00000fff]498vm-test-run-hermes-remote> server # [    0.117876] usbcore: registered new interface driver usbfs499vm-test-run-hermes-remote> server # [    0.117951] usbcore: registered new interface driver hub500vm-test-run-hermes-remote> client # [    0.277791] pci 0000:00:0a.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]501vm-test-run-hermes-remote> server # [    0.117979] usbcore: registered new device driver usb502vm-test-run-hermes-remote> server # [    0.118619] pps_core: LinuxPPS API ver. 1 registered503vm-test-run-hermes-remote> client # [    0.278236] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint504vm-test-run-hermes-remote> server # [    0.118627] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>505vm-test-run-hermes-remote> client # [    0.278516] pci 0000:00:0b.0: BAR 0 [io  0x0000-0x003f]506vm-test-run-hermes-remote> server # [    0.118664] PTP clock support registered507vm-test-run-hermes-remote> server # [    0.118740] EDAC MC: Ver: 3.0.0508vm-test-run-hermes-remote> client # [    0.278527] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff]509vm-test-run-hermes-remote> server # [    0.119255] scmi_core: SCMI protocol bus registered510vm-test-run-hermes-remote> client # [    0.278548] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]511vm-test-run-hermes-remote> server # [    0.120007] FPGA manager framework512vm-test-run-hermes-remote> server # [    0.122162] vgaarb: loaded513vm-test-run-hermes-remote> server # [    0.123396] clocksource: Switched to clocksource arch_sys_counter514vm-test-run-hermes-remote> client # [    0.279068] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint515vm-test-run-hermes-remote> server # [    0.158368] VFS: Disk quotas dquot_6.6.0516vm-test-run-hermes-remote> client # [    0.279333] pci 0000:00:0c.0: BAR 0 [io  0x0000-0x001f]517vm-test-run-hermes-remote> server # [    0.158412] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)518vm-test-run-hermes-remote> server # [    0.158965] netfs: FS-Cache loaded519vm-test-run-hermes-remote> client # [    0.279343] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff]520vm-test-run-hermes-remote> server # [    0.159165] pnp: PnP ACPI: disabled521vm-test-run-hermes-remote> server # [    0.164730] NET: Registered PF_INET protocol family522vm-test-run-hermes-remote> client # [    0.279402] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]523vm-test-run-hermes-remote> server # [    0.166774] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)524vm-test-run-hermes-remote> client # [    0.280094] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned525vm-test-run-hermes-remote> client # [    0.280102] pci 0000:00:04.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned526vm-test-run-hermes-remote> client # [    0.280105] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned527vm-test-run-hermes-remote> client # [    0.280145] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned528vm-test-run-hermes-remote> client # [    0.280199] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned529vm-test-run-hermes-remote> client # [    0.280250] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned530vm-test-run-hermes-remote> client # [    0.280297] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned531vm-test-run-hermes-remote> client # [    0.280333] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned532vm-test-run-hermes-remote> client # [    0.280380] pci 0000:00:08.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned533vm-test-run-hermes-remote> client # [    0.280415] pci 0000:00:09.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned534vm-test-run-hermes-remote> client # [    0.280462] pci 0000:00:0a.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned535vm-test-run-hermes-remote> client # [    0.280576] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned536vm-test-run-hermes-remote> client # [    0.280667] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned537vm-test-run-hermes-remote> server # [    0.203301] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)538vm-test-run-hermes-remote> client # [    0.280703] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned539vm-test-run-hermes-remote> server # [    0.203345] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)540vm-test-run-hermes-remote> client # [    0.280717] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned541vm-test-run-hermes-remote> server # [    0.203372] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)542vm-test-run-hermes-remote> client # [    0.280765] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned543vm-test-run-hermes-remote> server # [    0.203710] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)544vm-test-run-hermes-remote> client # [    0.280779] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned545vm-test-run-hermes-remote> server # [    0.204365] TCP: Hash tables configured (established 65536 bind 65536)546vm-test-run-hermes-remote> client # [    0.280793] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned547vm-test-run-hermes-remote> server # [    0.204489] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear)548vm-test-run-hermes-remote> client # [    0.280808] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned549vm-test-run-hermes-remote> server # [    0.204543] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)550vm-test-run-hermes-remote> client # [    0.280827] pci 0000:00:07.0: BAR 0 [mem 0x10086000-0x10086fff]: assigned551vm-test-run-hermes-remote> server # [    0.204663] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)552vm-test-run-hermes-remote> client # [    0.280847] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned553vm-test-run-hermes-remote> server # [    0.204890] NET: Registered PF_UNIX/PF_LOCAL protocol family554vm-test-run-hermes-remote> client # [    0.280862] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned555vm-test-run-hermes-remote> server # [    0.204922] NET: Registered PF_XDP protocol family556vm-test-run-hermes-remote> server # [    0.204945] PCI: CLS 0 bytes, default 64557vm-test-run-hermes-remote> server # [    0.205249] Trying to unpack rootfs image as initramfs...558vm-test-run-hermes-remote> client # [    0.280881] pci 0000:00:0a.0: BAR 1 [mem 0x10089000-0x10089fff]: assigned559vm-test-run-hermes-remote> client # [    0.280895] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned560vm-test-run-hermes-remote> client # [    0.281047] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned561vm-test-run-hermes-remote> client # [    0.281217] pci 0000:00:03.0: BAR 0 [io  0x1000-0x107f]: assigned562vm-test-run-hermes-remote> client # [    0.281240] pci 0000:00:0b.0: BAR 0 [io  0x1080-0x10bf]: assigned563vm-test-run-hermes-remote> client # [    0.281260] pci 0000:00:01.0: BAR 0 [io  0x10c0-0x10df]: assigned564vm-test-run-hermes-remote> client # [    0.281273] pci 0000:00:02.0: BAR 0 [io  0x10e0-0x10ff]: assigned565vm-test-run-hermes-remote> client # [    0.281287] pci 0000:00:04.0: BAR 0 [io  0x1100-0x111f]: assigned566vm-test-run-hermes-remote> client # [    0.281301] pci 0000:00:0c.0: BAR 0 [io  0x1120-0x113f]: assigned567vm-test-run-hermes-remote> client # [    0.281322] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]568vm-test-run-hermes-remote> client # [    0.281327] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]569vm-test-run-hermes-remote> client # [    0.281330] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff]570vm-test-run-hermes-remote> client # [    0.282163] pci 0000:00:07.0: enabling device (0000 -> 0002)571vm-test-run-hermes-remote> client # [    0.290916] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)572vm-test-run-hermes-remote> client # [    0.293308] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)573vm-test-run-hermes-remote> client # [    0.295360] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)574vm-test-run-hermes-remote> client # [    0.297556] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003)575vm-test-run-hermes-remote> client # [    0.299696] virtio-pci 0000:00:05.0: enabling device (0000 -> 0002)576vm-test-run-hermes-remote> client # [    0.302028] virtio-pci 0000:00:06.0: enabling device (0000 -> 0002)577vm-test-run-hermes-remote> client # [    0.303785] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002)578vm-test-run-hermes-remote> client # [    0.308635] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002)579vm-test-run-hermes-remote> client # [    0.310435] virtio-pci 0000:00:0a.0: enabling device (0000 -> 0002)580vm-test-run-hermes-remote> server # [    0.215512] kvm [1]: HYP mode not available581vm-test-run-hermes-remote> client # [    0.312134] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003)582vm-test-run-hermes-remote> client # [    0.314348] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003)583vm-test-run-hermes-remote> client # [    0.318317] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled584vm-test-run-hermes-remote> client # [    0.319603] msm_serial: driver initialized585vm-test-run-hermes-remote> client # [    0.319741] SuperH (H)SCI(F) driver initialized586vm-test-run-hermes-remote> client # [    0.319794] STM32 USART driver initialized587vm-test-run-hermes-remote> client # [    0.339617] loop: module loaded588vm-test-run-hermes-remote> client # [    0.339861] virtio_blk virtio2: 2/0/0 default/read/poll queues589vm-test-run-hermes-remote> client # [    0.340905] virtio_blk virtio2: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)590vm-test-run-hermes-remote> client # [    0.353606] megasas: 07.734.00.00-rc1591vm-test-run-hermes-remote> client # [    0.354150] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff]592vm-test-run-hermes-remote> client # [    0.356317] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000593vm-test-run-hermes-remote> client # [    0.356385] Intel/Sharp Extended Query Table at 0x0031594vm-test-run-hermes-remote> client # [    0.358048] Using buffer write method595vm-test-run-hermes-remote> client # [    0.358073] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff]596vm-test-run-hermes-remote> client # [    0.359730] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000597vm-test-run-hermes-remote> client # [    0.359744] Intel/Sharp Extended Query Table at 0x0031598vm-test-run-hermes-remote> client # [    0.366829] Using buffer write method599vm-test-run-hermes-remote> client # [    0.366871] Concatenating MTD devices:600vm-test-run-hermes-remote> client # [    0.366874] (0): "0.flash"601vm-test-run-hermes-remote> client # [    0.366876] (1): "0.flash"602vm-test-run-hermes-remote> client # [    0.366877] into device "0.flash"603vm-test-run-hermes-remote> server # [    0.271276] Initialise system trusted keyrings604vm-test-run-hermes-remote> server # [    0.271601] workingset: timestamp_bits=42 max_order=21 bucket_order=0605vm-test-run-hermes-remote> server # [    0.272745] squashfs: version 4.0 (2009/01/31) Phillip Lougher606vm-test-run-hermes-remote> server # [    0.273000] 9p: Installing v9fs 9p2000 file system support607vm-test-run-hermes-remote> server # [    0.303872] Key type asymmetric registered608vm-test-run-hermes-remote> server # [    0.303893] Asymmetric key parser 'x509' registered609vm-test-run-hermes-remote> server # [    0.304002] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)610vm-test-run-hermes-remote> server # [    0.304346] io scheduler mq-deadline registered611vm-test-run-hermes-remote> server # [    0.304356] io scheduler kyber registered612vm-test-run-hermes-remote> server # [    0.318051] pl061_gpio 9030000.pl061: PL061 GPIO chip registered613vm-test-run-hermes-remote> server # [    0.319506] ledtrig-cpu: registered to indicate activity on CPUs614vm-test-run-hermes-remote> server # [    0.320352] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges:615vm-test-run-hermes-remote> server # [    0.320386] pci-host-generic 4010000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000616vm-test-run-hermes-remote> server # [    0.320424] pci-host-generic 4010000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000617vm-test-run-hermes-remote> server # [    0.320436] pci-host-generic 4010000000.pcie:      MEM 0x8000000000..0xffffffffff -> 0x8000000000618vm-test-run-hermes-remote> server # [    0.320506] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits619vm-test-run-hermes-remote> server # [    0.320556] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]620vm-test-run-hermes-remote> server # [    0.320769] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00621vm-test-run-hermes-remote> server # [    0.320797] pci_bus 0000:00: root bus resource [bus 00-ff]622vm-test-run-hermes-remote> server # [    0.320805] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]623vm-test-run-hermes-remote> server # [    0.320812] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]624vm-test-run-hermes-remote> server # [    0.320819] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]625vm-test-run-hermes-remote> server # [    0.321049] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint626vm-test-run-hermes-remote> server # [    0.322421] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint627vm-test-run-hermes-remote> server # [    0.322892] pci 0000:00:01.0: BAR 0 [io  0x0000-0x001f]628vm-test-run-hermes-remote> server # [    0.322932] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]629vm-test-run-hermes-remote> server # [    0.323025] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]630vm-test-run-hermes-remote> server # [    0.323049] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref]631vm-test-run-hermes-remote> server # [    0.324257] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint632vm-test-run-hermes-remote> server # [    0.324732] pci 0000:00:02.0: BAR 0 [io  0x0000-0x001f]633vm-test-run-hermes-remote> server # [    0.324774] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff]634vm-test-run-hermes-remote> server # [    0.324822] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]635vm-test-run-hermes-remote> server # [    0.326025] pci 0000:00:03.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint636vm-test-run-hermes-remote> server # [    0.326465] pci 0000:00:03.0: BAR 0 [io  0x0000-0x007f]637vm-test-run-hermes-remote> server # [    0.326506] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]638vm-test-run-hermes-remote> server # [    0.326553] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]639vm-test-run-hermes-remote> server # [    0.327778] pci 0000:00:04.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint640vm-test-run-hermes-remote> server # [    0.328291] pci 0000:00:04.0: BAR 0 [io  0x0000-0x001f]641vm-test-run-hermes-remote> server # [    0.328316] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff]642vm-test-run-hermes-remote> server # [    0.328398] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]643vm-test-run-hermes-remote> server # [    0.328423] pci 0000:00:04.0: ROM [mem 0x00000000-0x0003ffff pref]644vm-test-run-hermes-remote> client # [    0.500081] Freeing initrd memory: 26892K645vm-test-run-hermes-remote> server # [    0.329644] pci 0000:00:05.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint646vm-test-run-hermes-remote> server # [    0.330148] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff]647vm-test-run-hermes-remote> server # [    0.330200] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]648vm-test-run-hermes-remote> client # [    0.513328] tun: Universal TUN/TAP device driver, 1.6649vm-test-run-hermes-remote> server # [    0.331469] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint650vm-test-run-hermes-remote> client # [    0.518642] thunder_xcv, ver 1.0651vm-test-run-hermes-remote> client # [    0.518699] thunder_bgx, ver 1.0652vm-test-run-hermes-remote> client # [    0.518728] nicpf, ver 1.0653vm-test-run-hermes-remote> client # [    0.519617] e1000: Intel(R) PRO/1000 Network Driver654vm-test-run-hermes-remote> client # [    0.519633] e1000: Copyright (c) 1999-2006 Intel Corporation.655vm-test-run-hermes-remote> client # [    0.519668] e1000e: Intel(R) PRO/1000 Network Driver656vm-test-run-hermes-remote> client # [    0.519677] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.657vm-test-run-hermes-remote> server # [    0.331948] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff]658vm-test-run-hermes-remote> client # [    0.519733] igb: Intel(R) Gigabit Ethernet Network Driver659vm-test-run-hermes-remote> client # [    0.519743] igb: Copyright (c) 2007-2014 Intel Corporation.660vm-test-run-hermes-remote> client # [    0.519796] igbvf: Intel(R) Gigabit Virtual Function Network Driver661vm-test-run-hermes-remote> client # [    0.519808] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.662vm-test-run-hermes-remote> client # [    0.520006] sky2: driver version 1.30663vm-test-run-hermes-remote> client # [    0.522650] usbcore: registered new interface driver usb-storage664vm-test-run-hermes-remote> client # [    0.522747] usbcore: registered new interface driver usbserial_generic665vm-test-run-hermes-remote> client # [    0.522781] usbserial: USB Serial support registered for generic666vm-test-run-hermes-remote> client # [    0.523674] hv_vmbus: registering driver hyperv_keyboard667vm-test-run-hermes-remote> client # [    0.524999] rtc-pl031 9010000.pl031: registered as rtc0668vm-test-run-hermes-remote> client # [    0.525054] rtc-pl031 9010000.pl031: setting system clock to 2026-09-25T16:36:37 UTC (1790354197)669vm-test-run-hermes-remote> server # [    0.332032] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]670vm-test-run-hermes-remote> client # [    0.525514] i2c_dev: i2c /dev entries driver671vm-test-run-hermes-remote> client # [    0.529841] ehci-pci 0000:00:07.0: EHCI Host Controller672vm-test-run-hermes-remote> client # [    0.529874] ehci-pci 0000:00:07.0: new USB bus registered, assigned bus number 1673vm-test-run-hermes-remote> client # [    0.530004] sdhci: Secure Digital Host Controller Interface driver674vm-test-run-hermes-remote> client # [    0.530020] sdhci: Copyright(c) Pierre Ossman675vm-test-run-hermes-remote> client # [    0.530097] ehci-pci 0000:00:07.0: irq 16, io mem 0x10086000676vm-test-run-hermes-remote> client # [    0.530499] Synopsys Designware Multimedia Card Interface Driver677vm-test-run-hermes-remote> client # [    0.531046] sdhci-pltfm: SDHCI platform and OF driver helper678vm-test-run-hermes-remote> server # [    0.333009] pci 0000:00:07.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint679vm-test-run-hermes-remote> client # [    0.533499] hid: raw HID events driver (C) Jiri Kosina680vm-test-run-hermes-remote> client # [    0.533884] usbcore: registered new interface driver usbhid681vm-test-run-hermes-remote> client # [    0.533892] usbhid: USB HID core driver682vm-test-run-hermes-remote> server # [    0.333526] pci 0000:00:07.0: BAR 0 [mem 0x00000000-0x00000fff]683vm-test-run-hermes-remote> server # [    0.334254] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint684vm-test-run-hermes-remote> client # [    0.541158] ehci-pci 0000:00:07.0: USB 2.0 started, EHCI 1.00685vm-test-run-hermes-remote> server # [    0.334710] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff]686vm-test-run-hermes-remote> client # [    0.549350] hub 1-0:1.0: USB hub found687vm-test-run-hermes-remote> client # [    0.549431] hub 1-0:1.0: 6 ports detected688vm-test-run-hermes-remote> server # [    0.334791] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]689vm-test-run-hermes-remote> server # [    0.336031] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint690vm-test-run-hermes-remote> server # [    0.336479] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff]691vm-test-run-hermes-remote> server # [    0.336568] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]692vm-test-run-hermes-remote> server # [    0.337799] pci 0000:00:0a.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint693vm-test-run-hermes-remote> server # [    0.338325] pci 0000:00:0a.0: BAR 1 [mem 0x00000000-0x00000fff]694vm-test-run-hermes-remote> server # [    0.338385] pci 0000:00:0a.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]695vm-test-run-hermes-remote> server # [    0.339552] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint696vm-test-run-hermes-remote> server # [    0.340145] pci 0000:00:0b.0: BAR 0 [io  0x0000-0x003f]697vm-test-run-hermes-remote> server # [    0.340170] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff]698vm-test-run-hermes-remote> server # [    0.340249] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]699vm-test-run-hermes-remote> server # [    0.341428] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint700vm-test-run-hermes-remote> client # [    0.570012] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available701vm-test-run-hermes-remote> server # [    0.341924] pci 0000:00:0c.0: BAR 0 [io  0x0000-0x001f]702vm-test-run-hermes-remote> client # [    0.572275] drop_monitor: Initializing network drop monitor service703vm-test-run-hermes-remote> client # [    0.572534] NET: Registered PF_INET6 protocol family704vm-test-run-hermes-remote> server # [    0.341959] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff]705vm-test-run-hermes-remote> client # [    0.575914] Segment Routing with IPv6706vm-test-run-hermes-remote> client # [    0.575933] In-situ OAM (IOAM) with IPv6707vm-test-run-hermes-remote> server # [    0.342012] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]708vm-test-run-hermes-remote> client # [    0.576041] NET: Registered PF_PACKET protocol family709vm-test-run-hermes-remote> client # [    0.576181] 9pnet: Installing 9P2000 support710vm-test-run-hermes-remote> client # [    0.576252] Key type dns_resolver registered711vm-test-run-hermes-remote> server # [    0.343648] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned712vm-test-run-hermes-remote> server # [    0.343664] pci 0000:00:04.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned713vm-test-run-hermes-remote> server # [    0.343673] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned714vm-test-run-hermes-remote> server # [    0.343817] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned715vm-test-run-hermes-remote> server # [    0.343943] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned716vm-test-run-hermes-remote> client # [    0.585487] registered taskstats version 1717vm-test-run-hermes-remote> client # [    0.585931] Loading compiled-in X.509 certificates718vm-test-run-hermes-remote> server # [    0.344083] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned719vm-test-run-hermes-remote> server # [    0.344234] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned720vm-test-run-hermes-remote> server # [    0.344322] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned721vm-test-run-hermes-remote> server # [    0.344417] pci 0000:00:08.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned722vm-test-run-hermes-remote> server # [    0.344557] pci 0000:00:09.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned723vm-test-run-hermes-remote> server # [    0.344698] pci 0000:00:0a.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned724vm-test-run-hermes-remote> server # [    0.344834] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned725vm-test-run-hermes-remote> server # [    0.345065] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned726vm-test-run-hermes-remote> server # [    0.345247] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned727vm-test-run-hermes-remote> client # [    0.602459] Demotion targets for Node 0: null728vm-test-run-hermes-remote> server # [    0.345293] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned729vm-test-run-hermes-remote> client # [    0.602633] Key type .fscrypt registered730vm-test-run-hermes-remote> server # [    0.345350] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned731vm-test-run-hermes-remote> client # [    0.602639] Key type fscrypt-provisioning registered732vm-test-run-hermes-remote> client # [    0.602875] ima: No TPM chip found, activating TPM-bypass!733vm-test-run-hermes-remote> server # [    0.345386] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned734vm-test-run-hermes-remote> client # [    0.602891] ima: Allocated hash algorithm: sha1735vm-test-run-hermes-remote> server # [    0.345428] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned736vm-test-run-hermes-remote> client # [    0.602952] ima: No architecture policies found737vm-test-run-hermes-remote> client # [    0.603745] input: gpio-keys as /devices/platform/gpio-keys/input/input0738vm-test-run-hermes-remote> server # [    0.345462] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned739vm-test-run-hermes-remote> server # [    0.345501] pci 0000:00:07.0: BAR 0 [mem 0x10086000-0x10086fff]: assigned740vm-test-run-hermes-remote> server # [    0.345536] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned741vm-test-run-hermes-remote> server # [    0.345570] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned742vm-test-run-hermes-remote> client # [    0.623579] clk: Disabling unused clocks743vm-test-run-hermes-remote> client # [    0.623593] PM: genpd: Disabling unused power domains744vm-test-run-hermes-remote> server # [    0.345605] pci 0000:00:0a.0: BAR 1 [mem 0x10089000-0x10089fff]: assigned745vm-test-run-hermes-remote> client # [    0.629629] Freeing unused kernel memory: 4736K746vm-test-run-hermes-remote> client # [    0.629896] Run /init as init process747vm-test-run-hermes-remote> server # [    0.345640] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned748vm-test-run-hermes-remote> server # [    0.345674] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned749vm-test-run-hermes-remote> server # [    0.345709] pci 0000:00:03.0: BAR 0 [io  0x1000-0x107f]: assigned750vm-test-run-hermes-remote> server # [    0.345759] pci 0000:00:0b.0: BAR 0 [io  0x1080-0x10bf]: assigned751vm-test-run-hermes-remote> server # [    0.345811] pci 0000:00:01.0: BAR 0 [io  0x10c0-0x10df]: assigned752vm-test-run-hermes-remote> server # [    0.345859] pci 0000:00:02.0: BAR 0 [io  0x10e0-0x10ff]: assigned753vm-test-run-hermes-remote> server # [    0.345894] pci 0000:00:04.0: BAR 0 [io  0x1100-0x111f]: assigned754vm-test-run-hermes-remote> server # [    0.345928] pci 0000:00:0c.0: BAR 0 [io  0x1120-0x113f]: assigned755vm-test-run-hermes-remote> server # [    0.345972] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]756vm-test-run-hermes-remote> server # [    0.345983] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]757vm-test-run-hermes-remote> server # [    0.345990] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff]758vm-test-run-hermes-remote> server # [    0.348273] pci 0000:00:07.0: enabling device (0000 -> 0002)759vm-test-run-hermes-remote> server # [    0.367055] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)760vm-test-run-hermes-remote> server # [    0.372179] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)761vm-test-run-hermes-remote> server # [    0.377275] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)762vm-test-run-hermes-remote> server # [    0.383436] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003)763vm-test-run-hermes-remote> server # [    0.388175] virtio-pci 0000:00:05.0: enabling device (0000 -> 0002)764vm-test-run-hermes-remote> server # [    0.393375] virtio-pci 0000:00:06.0: enabling device (0000 -> 0002)765vm-test-run-hermes-remote> client # [    0.658255] systemd[1]: Successfully made /usr/ read-only.766vm-test-run-hermes-remote> server # [    0.398069] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002)767vm-test-run-hermes-remote> server # [    0.402337] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002)768vm-test-run-hermes-remote> server # [    0.408115] virtio-pci 0000:00:0a.0: enabling device (0000 -> 0002)769vm-test-run-hermes-remote> server # [    0.412595] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003)770vm-test-run-hermes-remote> server # [    0.418938] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003)771vm-test-run-hermes-remote> server # [    0.428962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled772vm-test-run-hermes-remote> server # [    0.431668] msm_serial: driver initialized773vm-test-run-hermes-remote> server # [    0.431978] SuperH (H)SCI(F) driver initialized774vm-test-run-hermes-remote> server # [    0.432096] STM32 USART driver initialized775vm-test-run-hermes-remote> server # [    0.478361] loop: module loaded776vm-test-run-hermes-remote> server # [    0.478805] virtio_blk virtio2: 4/0/0 default/read/poll queues777vm-test-run-hermes-remote> server # [    0.482554] virtio_blk virtio2: [vda] 50331648 512-byte logical blocks (25.8 GB/24.0 GiB)778vm-test-run-hermes-remote> server # [    0.486398] megasas: 07.734.00.00-rc1779vm-test-run-hermes-remote> server # [    0.487457] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff]780vm-test-run-hermes-remote> server # [    0.493569] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000781vm-test-run-hermes-remote> server # [    0.493601] Intel/Sharp Extended Query Table at 0x0031782vm-test-run-hermes-remote> server # [    0.497612] Using buffer write method783vm-test-run-hermes-remote> server # [    0.497653] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff]784vm-test-run-hermes-remote> server # [    0.501863] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000785vm-test-run-hermes-remote> server # [    0.501882] Intel/Sharp Extended Query Table at 0x0031786vm-test-run-hermes-remote> server # [    0.504815] Using buffer write method787vm-test-run-hermes-remote> server # [    0.504841] Concatenating MTD devices:788vm-test-run-hermes-remote> server # [    0.504844] (0): "0.flash"789vm-test-run-hermes-remote> server # [    0.504848] (1): "0.flash"790vm-test-run-hermes-remote> server # [    0.504850] into device "0.flash"791vm-test-run-hermes-remote> server # [    0.599619] Freeing initrd memory: 26888K792vm-test-run-hermes-remote> server # [    0.613188] tun: Universal TUN/TAP device driver, 1.6793vm-test-run-hermes-remote> server # [    0.618626] thunder_xcv, ver 1.0794vm-test-run-hermes-remote> server # [    0.618680] thunder_bgx, ver 1.0795vm-test-run-hermes-remote> server # [    0.618706] nicpf, ver 1.0796vm-test-run-hermes-remote> server # [    0.619629] e1000: Intel(R) PRO/1000 Network Driver797vm-test-run-hermes-remote> server # [    0.619640] e1000: Copyright (c) 1999-2006 Intel Corporation.798vm-test-run-hermes-remote> server # [    0.619670] e1000e: Intel(R) PRO/1000 Network Driver799vm-test-run-hermes-remote> server # [    0.619680] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.800vm-test-run-hermes-remote> server # [    0.619727] igb: Intel(R) Gigabit Ethernet Network Driver801vm-test-run-hermes-remote> server # [    0.619734] igb: Copyright (c) 2007-2014 Intel Corporation.802vm-test-run-hermes-remote> server # [    0.619760] igbvf: Intel(R) Gigabit Virtual Function Network Driver803vm-test-run-hermes-remote> server # [    0.619766] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.804vm-test-run-hermes-remote> server # [    0.619978] sky2: driver version 1.30805vm-test-run-hermes-remote> server # [    0.622559] usbcore: registered new interface driver usb-storage806vm-test-run-hermes-remote> server # [    0.622735] usbcore: registered new interface driver usbserial_generic807vm-test-run-hermes-remote> server # [    0.622753] usbserial: USB Serial support registered for generic808vm-test-run-hermes-remote> server # [    0.622952] ehci-pci 0000:00:07.0: EHCI Host Controller809vm-test-run-hermes-remote> server # [    0.623003] ehci-pci 0000:00:07.0: new USB bus registered, assigned bus number 1810vm-test-run-hermes-remote> server # [    0.623477] ehci-pci 0000:00:07.0: irq 16, io mem 0x10086000811vm-test-run-hermes-remote> server # [    0.623664] hv_vmbus: registering driver hyperv_keyboard812vm-test-run-hermes-remote> server # [    0.624988] rtc-pl031 9010000.pl031: registered as rtc0813vm-test-run-hermes-remote> server # [    0.625039] rtc-pl031 9010000.pl031: setting system clock to 2026-09-25T16:36:37 UTC (1790354197)814vm-test-run-hermes-remote> server # [    0.625502] i2c_dev: i2c /dev entries driver815vm-test-run-hermes-remote> server # [    0.630064] sdhci: Secure Digital Host Controller Interface driver816vm-test-run-hermes-remote> server # [    0.630076] sdhci: Copyright(c) Pierre Ossman817vm-test-run-hermes-remote> server # [    0.630499] Synopsys Designware Multimedia Card Interface Driver818vm-test-run-hermes-remote> server # [    0.631041] sdhci-pltfm: SDHCI platform and OF driver helper819vm-test-run-hermes-remote> server # [    0.633300] hid: raw HID events driver (C) Jiri Kosina820vm-test-run-hermes-remote> server # [    0.633632] usbcore: registered new interface driver usbhid821vm-test-run-hermes-remote> server # [    0.633639] usbhid: USB HID core driver822vm-test-run-hermes-remote> server # [    0.635463] ehci-pci 0000:00:07.0: USB 2.0 started, EHCI 1.00823vm-test-run-hermes-remote> server # [    0.636160] hub 1-0:1.0: USB hub found824vm-test-run-hermes-remote> server # [    0.636339] hub 1-0:1.0: 6 ports detected825vm-test-run-hermes-remote> server # [    0.641683] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available826vm-test-run-hermes-remote> server # [    0.643992] drop_monitor: Initializing network drop monitor service827vm-test-run-hermes-remote> server # [    0.644298] NET: Registered PF_INET6 protocol family828vm-test-run-hermes-remote> server # [    0.645968] Segment Routing with IPv6829vm-test-run-hermes-remote> server # [    0.645997] In-situ OAM (IOAM) with IPv6830vm-test-run-hermes-remote> server # [    0.646118] NET: Registered PF_PACKET protocol family831vm-test-run-hermes-remote> server # [    0.646333] 9pnet: Installing 9P2000 support832vm-test-run-hermes-remote> server # [    0.646386] Key type dns_resolver registered833vm-test-run-hermes-remote> server # [    0.650531] registered taskstats version 1834vm-test-run-hermes-remote> server # [    0.650740] Loading compiled-in X.509 certificates835vm-test-run-hermes-remote> server # [    0.656598] Demotion targets for Node 0: null836vm-test-run-hermes-remote> server # [    0.656717] Key type .fscrypt registered837vm-test-run-hermes-remote> server # [    0.656721] Key type fscrypt-provisioning registered838vm-test-run-hermes-remote> server # [    0.656836] ima: No TPM chip found, activating TPM-bypass!839vm-test-run-hermes-remote> server # [    0.656847] ima: Allocated hash algorithm: sha1840vm-test-run-hermes-remote> server # [    0.656907] ima: No architecture policies found841vm-test-run-hermes-remote> server # [    0.657520] input: gpio-keys as /devices/platform/gpio-keys/input/input0842vm-test-run-hermes-remote> server # [    0.669568] clk: Disabling unused clocks843vm-test-run-hermes-remote> server # [    0.669579] PM: genpd: Disabling unused power domains844vm-test-run-hermes-remote> client # [    0.801180] usb 1-1: new high-speed USB device number 2 using ehci-pci845vm-test-run-hermes-remote> server # [    0.674439] Freeing unused kernel memory: 4736K846vm-test-run-hermes-remote> server # [    0.674552] Run /init as init process847vm-test-run-hermes-remote> server # [    0.707285] systemd[1]: Successfully made /usr/ read-only.848vm-test-run-hermes-remote> client # [    0.953479] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:07.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1849vm-test-run-hermes-remote> client # [    0.992742] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)850vm-test-run-hermes-remote> client # [    0.992772] systemd[1]: Detected virtualization qemu.851vm-test-run-hermes-remote> client # [    0.992810] systemd[1]: Detected architecture arm64.852vm-test-run-hermes-remote> client # [    0.992819] systemd[1]: Running in initrd.853vm-test-run-hermes-remote> client # [    0.993674] systemd[1]: Initializing machine ID from random generator.854vm-test-run-hermes-remote> client # [    0.994054] systemd[1]: Hostname set to <client>.855vm-test-run-hermes-remote> server # [    0.883451] usb 1-1: new high-speed USB device number 2 using ehci-pci856vm-test-run-hermes-remote> client # [    1.073225] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:07.0-1/input0857vm-test-run-hermes-remote> server # [    1.036122] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:07.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1858vm-test-run-hermes-remote> server # [    1.041886] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)859vm-test-run-hermes-remote> server # [    1.041917] systemd[1]: Detected virtualization qemu.860vm-test-run-hermes-remote> server # [    1.041954] systemd[1]: Detected architecture arm64.861vm-test-run-hermes-remote> server # [    1.041963] systemd[1]: Running in initrd.862vm-test-run-hermes-remote> server # [    1.042732] systemd[1]: Initializing machine ID from random generator.863vm-test-run-hermes-remote> server # [    1.043008] systemd[1]: Hostname set to <server>.864vm-test-run-hermes-remote> client # [    1.197183] usb 1-2: new high-speed USB device number 3 using ehci-pci865vm-test-run-hermes-remote> client # [    1.226268] systemd[1]: bpf-restrict-fs: LSM BPF program attached866vm-test-run-hermes-remote> server # [    1.131794] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:07.0-1/input0867vm-test-run-hermes-remote> client # [    1.312455] systemd[1]: Queued start job for default target Initrd Default Target.868vm-test-run-hermes-remote> client # [    1.323302] systemd[1]: Created slice Slice /system/modprobe.869vm-test-run-hermes-remote> client # [    1.323507] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.870vm-test-run-hermes-remote> client # [    1.323550] systemd[1]: Expecting device /dev/disk/by-label/nixos...871vm-test-run-hermes-remote> client # [    1.323580] systemd[1]: Reached target Path Units.872vm-test-run-hermes-remote> client # [    1.323602] systemd[1]: Reached target Slice Units.873vm-test-run-hermes-remote> client # [    1.323619] systemd[1]: Reached target Swaps.874vm-test-run-hermes-remote> client # [    1.323637] systemd[1]: Reached target Timer Units.875vm-test-run-hermes-remote> client # [    1.323808] systemd[1]: Listening on D-Bus System Message Bus Socket.876vm-test-run-hermes-remote> client # [    1.323933] systemd[1]: Listening on Journal Socket (/dev/log).877vm-test-run-hermes-remote> client # [    1.324120] systemd[1]: Listening on Journal Sockets.878vm-test-run-hermes-remote> client # [    1.324226] systemd[1]: Listening on udev Control Socket.879vm-test-run-hermes-remote> client # [    1.324295] systemd[1]: Listening on udev Kernel Socket.880vm-test-run-hermes-remote> client # [    1.324318] systemd[1]: Reached target Socket Units.881vm-test-run-hermes-remote> client # [    1.333322] systemd[1]: Starting Create List of Static Device Nodes...882vm-test-run-hermes-remote> client # [    1.333415] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs883vm-test-run-hermes-remote> client # [    1.344261] systemd[1]: Mounting Kernel Configuration File System...884vm-test-run-hermes-remote> client # [    1.351973] systemd[1]: Starting Journal Service...885vm-test-run-hermes-remote> client # [    1.356583] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:07.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2886vm-test-run-hermes-remote> client # [    1.356714] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:07.0-2/input0887vm-test-run-hermes-remote> client # [    1.356922] systemd[1]: Starting Load Kernel Modules...888vm-test-run-hermes-remote> client # [    1.357028] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os889vm-test-run-hermes-remote> client # [    1.373266] systemd[1]: Starting Coldplug All udev Devices...890vm-test-run-hermes-remote> client # [    1.374487] systemd[1]: Finished Create List of Static Device Nodes.891vm-test-run-hermes-remote> server # [    1.251572] usb 1-2: new high-speed USB device number 3 using ehci-pci892vm-test-run-hermes-remote> client # [    1.389972] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...893vm-test-run-hermes-remote> client # [    1.390420] systemd[1]: Mounted Kernel Configuration File System.894vm-test-run-hermes-remote> client # [    1.403598] [drm] pci: virtio-gpu-pci detected at 0000:00:05.0895vm-test-run-hermes-remote> client # [    1.403839] [drm] features: -virgl +edid -resource_blob -host_visible896vm-test-run-hermes-remote> client # [    1.403842] [drm] features: -context_init897vm-test-run-hermes-remote> server # [    1.274851] systemd[1]: bpf-restrict-fs: LSM BPF program attached898vm-test-run-hermes-remote> client # [    1.422426] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.899vm-test-run-hermes-remote> client # [    1.425314] systemd[1]: Starting Create Static Device Nodes in /dev...900vm-test-run-hermes-remote> client # [    1.426803] systemd-journald[78]: Collecting audit messages is disabled.901vm-test-run-hermes-remote> client # [    1.429034] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.902vm-test-run-hermes-remote> client # [    1.431880] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev903vm-test-run-hermes-remote> client # [    1.437225] [drm] number of scanouts: 1904vm-test-run-hermes-remote> client # [    1.437244] [drm] number of cap sets: 0905vm-test-run-hermes-remote> client # [    1.442712] virtio-pci 0000:00:05.0: [drm] Registered 1 planes with drm panic906vm-test-run-hermes-remote> client # [    1.442722] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:05.0 on minor 0907vm-test-run-hermes-remote> client # [    1.453268] systemd[1]: Finished Create Static Device Nodes in /dev.908vm-test-run-hermes-remote> client # [    1.453410] systemd[1]: Reached target Preparation for Local File Systems.909vm-test-run-hermes-remote> client # [    1.453435] systemd[1]: Reached target Local File Systems.910vm-test-run-hermes-remote> client # [    1.453572] Console: switching to colour frame buffer device 160x50911vm-test-run-hermes-remote> client # [    1.462534] systemd-modules-load[79]: Using 2 probe threads912vm-test-run-hermes-remote> client # [    1.465699] systemd-modules-load[79]: Module 'virtio_balloon' is built in913vm-test-run-hermes-remote> client # [    1.466498] systemd-modules-load[79]: Module 'virtio_console' is built in914vm-test-run-hermes-remote> client # [    1.467272] systemd-modules-load[79]: Inserted module 'dm_mod'915vm-test-run-hermes-remote> client # [    1.467923] systemd-modules-load[79]: Module 'virtio_rng' is built in[    1.465344] systemd[1]: Starting Rule-based Manager for Device Events and Files...916vm-test-run-hermes-remote> client # [    1.465537] systemd[1]: Started Journal Service.917vm-test-run-hermes-remote> client # [    1.470291] virtio-pci 0000:00:05.0: [drm] fb0: virtio_gpudrmfb frame buffer device918vm-test-run-hermes-remote> client # 919vm-test-run-hermes-remote> client # [    1.477488] systemd[1]: Starting Create System Files and Directories...920vm-test-run-hermes-remote> client # [    1.482201] systemd-modules-load[79]: Inserted module 'virtio_gpu'921vm-test-run-hermes-remote> server # [    1.354915] systemd[1]: Queued start job for default target Initrd Default Target.922vm-test-run-hermes-remote> client # [    1.493606] systemd[1]: Finished Load Kernel Modules.923vm-test-run-hermes-remote> client # [    1.502134] systemd[1]: Starting Apply Kernel Variables...924vm-test-run-hermes-remote> server # [    1.374811] systemd[1]: Created slice Slice /system/modprobe.925vm-test-run-hermes-remote> server # [    1.375125] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.926vm-test-run-hermes-remote> server # [    1.375192] systemd[1]: Expecting device /dev/disk/by-label/nixos...927vm-test-run-hermes-remote> server # [    1.375242] systemd[1]: Reached target Path Units.928vm-test-run-hermes-remote> server # [    1.375276] systemd[1]: Reached target Slice Units.929vm-test-run-hermes-remote> server # [    1.375307] systemd[1]: Reached target Swaps.930vm-test-run-hermes-remote> server # [    1.375337] systemd[1]: Reached target Timer Units.931vm-test-run-hermes-remote> server # [    1.375668] systemd[1]: Listening on D-Bus System Message Bus Socket.932vm-test-run-hermes-remote> server # [    1.376460] systemd[1]: Listening on Journal Socket (/dev/log).933vm-test-run-hermes-remote> server # [    1.376750] systemd[1]: Listening on Journal Sockets.934vm-test-run-hermes-remote> server # [    1.376932] systemd[1]: Listening on udev Control Socket.935vm-test-run-hermes-remote> client # [    1.520111] systemd[1]: Finished Create System Files and Directories.936vm-test-run-hermes-remote> client # [    1.521136] systemd[1]: Finished Apply Kernel Variables.937vm-test-run-hermes-remote> server # [    1.377045] systemd[1]: Listening on udev Kernel Socket.938vm-test-run-hermes-remote> server # [    1.377084] systemd[1]: Reached target Socket Units.939vm-test-run-hermes-remote> server # [    1.379257] systemd[1]: Starting Create List of Static Device Nodes...940vm-test-run-hermes-remote> client # [    1.524334] systemd-udevd[86]: Using default interface naming scheme 'v261'.941vm-test-run-hermes-remote> server # [    1.379371] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs942vm-test-run-hermes-remote> server # [    1.381177] systemd[1]: Mounting Kernel Configuration File System...943vm-test-run-hermes-remote> server # [    1.392631] systemd[1]: Starting Journal Service...944vm-test-run-hermes-remote> server # [    1.399238] systemd[1]: Starting Load Kernel Modules...945vm-test-run-hermes-remote> server # [    1.399382] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os946vm-test-run-hermes-remote> server # [    1.401926] systemd[1]: Starting Coldplug All udev Devices...947vm-test-run-hermes-remote> client # [    1.535414] systemd[1]: Started Rule-based Manager for Device Events and Files.948vm-test-run-hermes-remote> server # [    1.407521] systemd[1]: Finished Create List of Static Device Nodes.949vm-test-run-hermes-remote> server # [    1.408829] systemd[1]: Mounted Kernel Configuration File System.950vm-test-run-hermes-remote> server # [    1.410800] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...951vm-test-run-hermes-remote> client # [    1.560358] systemd[1]: Starting Virtual Console Setup...952vm-test-run-hermes-remote> server # [    1.427301] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:07.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2953vm-test-run-hermes-remote> server # [    1.431590] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:07.0-2/input0954vm-test-run-hermes-remote> server # [    1.443189] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.955vm-test-run-hermes-remote> server # [    1.445240] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.956vm-test-run-hermes-remote> server # [    1.445571] systemd[1]: Starting Create Static Device Nodes in /dev...957vm-test-run-hermes-remote> server # [    1.445698] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev958vm-test-run-hermes-remote> server # [    1.452390] systemd-journald[93]: Collecting audit messages is disabled.959vm-test-run-hermes-remote> client # [    1.586434] systemd-vconsole-setup[110]: Configuration of first virtual console was skipped, ignoring remaining ones.960vm-test-run-hermes-remote> client # [    1.589065] systemd[1]: Finished Virtual Console Setup.961vm-test-run-hermes-remote> server # [    1.460606] [drm] pci: virtio-gpu-pci detected at 0000:00:05.0962vm-test-run-hermes-remote> server # [    1.460856] [drm] features: -virgl +edid -resource_blob -host_visible963vm-test-run-hermes-remote> server # [    1.460860] [drm] features: -context_init964vm-test-run-hermes-remote> server # [    1.461933] [drm] number of scanouts: 1965vm-test-run-hermes-remote> server # [    1.461953] [drm] number of cap sets: 0966vm-test-run-hermes-remote> server # [    1.464014] virtio-pci 0000:00:05.0: [drm] Registered 1 planes with drm panic967vm-test-run-hermes-remote> server # [    1.464032] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:05.0 on minor 0968vm-test-run-hermes-remote> server # [    1.467992] Console: switching to colour frame buffer device 160x50969vm-test-run-hermes-remote> server # [    1.473846] virtio-pci 0000:00:05.0: [drm] fb0: virtio_gpudrmfb frame buffer device970vm-test-run-hermes-remote> server # [    1.480742] systemd-modules-load[94]: Using 4 probe threads971vm-test-run-hermes-remote> server # [    1.482471] systemd-modules-load[94]: Module 'virtio_balloon' is built in972vm-test-run-hermes-remote> server # [    1.483292] systemd-modules-load[94]: Module 'virtio_console' is built in973vm-test-run-hermes-remote> server # [    1.487791] systemd[1]: Finished Create Static Device Nodes in /dev.974vm-test-run-hermes-remote> server # [    1.488193] systemd[1]: Reached target Preparation for Local File Systems.975vm-test-run-hermes-remote> server # [    1.488571] systemd[1]: Reached target Local File Systems.976vm-test-run-hermes-remote> server # [    1.484196] systemd-modules-load[94]: Module 'virtio_rng' is built in[    1.490693] systemd[1]: Starting Rule-based Manager for Device Events and Files...977vm-test-run-hermes-remote> server # 978vm-test-run-hermes-remote> server # [    1.491776] systemd[1]: Finished Load Kernel Modules.979vm-test-run-hermes-remote> server # [    1.492227] systemd[1]: Started Journal Service.980vm-test-run-hermes-remote> server # [    1.492627] systemd-modules-load[94]: Inserted module 'dm_mod'981vm-test-run-hermes-remote> server # [    1.493483] systemd-modules-load[94]: Inserted module 'virtio_gpu'982vm-test-run-hermes-remote> server # [    1.494506] systemd[1]: Starting Apply Kernel Variables...983vm-test-run-hermes-remote> server # [    1.495157] systemd[1]: Starting Create System Files and Directories...984vm-test-run-hermes-remote> server # [    1.529146] systemd[1]: Finished Create System Files and Directories.985vm-test-run-hermes-remote> server # [    1.532900] systemd[1]: Finished Apply Kernel Variables.986vm-test-run-hermes-remote> server # [    1.545436] systemd-udevd[103]: Using default interface naming scheme 'v261'.987vm-test-run-hermes-remote> server # [    1.562451] systemd[1]: Started Rule-based Manager for Device Events and Files.988vm-test-run-hermes-remote> server # [    1.585396] systemd[1]: Starting Virtual Console Setup...989vm-test-run-hermes-remote> client # [    1.748145] systemd[1]: Finished Coldplug All udev Devices.990vm-test-run-hermes-remote> client # [    1.749201] systemd[1]: Reached target System Initialization.991vm-test-run-hermes-remote> client # [    1.749951] systemd[1]: Reached target Basic System.992vm-test-run-hermes-remote> server # [    1.635763] systemd-vconsole-setup[128]: Configuration of first virtual console was skipped, ignoring remaining ones.993vm-test-run-hermes-remote> server # [    1.638886] systemd[1]: Finished Virtual Console Setup.994vm-test-run-hermes-remote> server # [    1.730949] systemd[1]: Finished Coldplug All udev Devices.995vm-test-run-hermes-remote> server # [    1.731545] systemd[1]: Reached target System Initialization.996vm-test-run-hermes-remote> server # [    1.732096] systemd[1]: Reached target Basic System.997vm-test-run-hermes-remote> client # [    1.878673] (udev-worker)[107]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.998vm-test-run-hermes-remote> client # [    1.882120] (udev-worker)[107]: Network interface NamePolicy= disabled on kernel command line.999vm-test-run-hermes-remote> client # [    1.892987] (udev-worker)[108]: Network interface NamePolicy= disabled on kernel command line.1000vm-test-run-hermes-remote> client # [    1.896970] systemd[1]: Found device /dev/disk/by-label/nixos.1001vm-test-run-hermes-remote> client # [    1.898342] systemd[1]: Reached target Initrd Root Device.1002vm-test-run-hermes-remote> client # [    1.900095] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...1003vm-test-run-hermes-remote> client # [    1.937952] systemd-fsck[123]: nixos: clean, 12/65536 files, 13019/262144 blocks1004vm-test-run-hermes-remote> client # [    1.949987] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.1005vm-test-run-hermes-remote> server # [    1.886900] (udev-worker)[142]: Network interface NamePolicy= disabled on kernel command line.1006vm-test-run-hermes-remote> server # [    1.901600] (udev-worker)[120]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.1007vm-test-run-hermes-remote> server # [    1.903548] (udev-worker)[120]: Network interface NamePolicy= disabled on kernel command line.1008vm-test-run-hermes-remote> server # [    1.935093] systemd[1]: Found device /dev/disk/by-label/nixos.1009vm-test-run-hermes-remote> server # [    1.935944] systemd[1]: Reached target Initrd Root Device.1010vm-test-run-hermes-remote> server # [    1.936903] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...1011vm-test-run-hermes-remote> server # [    1.984255] systemd-fsck[150]: nixos: clean, 12/1572864 files, 142772/6291456 blocks1012vm-test-run-hermes-remote> server # [    2.029771] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.1013vm-test-run-hermes-remote> client # [    2.348270] fuse: init (API version 7.45)1014vm-test-run-hermes-remote> client # [    2.352102] virtiofs virtio6: discovered new tag: nix-store1015vm-test-run-hermes-remote> client # [    2.352624] virtiofs virtio6: virtio_fs_setup_dax: No cache capability1016vm-test-run-hermes-remote> client # [    2.368488] virtiofs virtio7: discovered new tag: shared1017vm-test-run-hermes-remote> client # [    2.368976] virtiofs virtio7: virtio_fs_setup_dax: No cache capability1018vm-test-run-hermes-remote> client # [    2.376482] virtiofs virtio8: discovered new tag: xchg1019vm-test-run-hermes-remote> client # [    2.376977] virtiofs virtio8: virtio_fs_setup_dax: No cache capability1020vm-test-run-hermes-remote> client # [    2.377565] systemd[1]: Mounting /sysroot...1021vm-test-run-hermes-remote> server # [    2.254283] fuse: init (API version 7.45)1022vm-test-run-hermes-remote> server # [    2.259892] virtiofs virtio6: discovered new tag: nix-store1023vm-test-run-hermes-remote> client # [    2.409922] (udev-worker)[108]: mtd0ro: Failed to find and pin callout binary "/nix/store/gnadg5slifq2r638xvz4pv6vrsdl9xkj-systemd-261.2/lib/udev/mtd_probe": No such file or directory1024vm-test-run-hermes-remote> client # [    2.413742] (udev-worker)[108]: mtd0ro: /etc/udev/rules.d/75-probe_mtd.rules:5 IMPORT{program}="mtd_probe $devnode": Failed to execute "mtd_probe /dev/mtd0ro", ignoring: No such file or directory1025vm-test-run-hermes-remote> client # [    2.413244] EXT4-fs (vda): mounted filesystem b410a809-bcaa-4415-b0f7-343ca6275abb r/w with ordered data mode. Quota mode: none.1026vm-test-run-hermes-remote> client # [    2.417817] systemd[1]: Mounted /sysroot.1027vm-test-run-hermes-remote> client # [    2.418286] systemd[1]: Reached target Initrd Root File System.1028vm-test-run-hermes-remote> client # [    2.421391] systemd[1]: Mounting /sysroot/nix/.ro-store...1029vm-test-run-hermes-remote> client # [    2.423421] systemd[1]: Mounting /sysroot/nix/.rw-store...1030vm-test-run-hermes-remote> server # [    2.287332] (udev-worker)[117]: mtd0ro: Failed to find and pin callout binary "/nix/store/gnadg5slifq2r638xvz4pv6vrsdl9xkj-systemd-261.2/lib/udev/mtd_probe": No such file or directory[    2.297090] virtiofs virtio6: virtio_fs_setup_dax: No cache capability1031vm-test-run-hermes-remote> server # 1032vm-test-run-hermes-remote> server # [    2.289633] (udev-worker)[117]: mtd0ro: /etc/udev/rules.d/75-probe_mtd.rules:5 IMPORT{program}="mtd_probe $devnode": Failed to execute "mtd_probe /dev/mtd0ro", ignoring: No such file or directory1033vm-test-run-hermes-remote> client # [    2.433455] systemd[1]: Mounting /sysroot/run...1034vm-test-run-hermes-remote> server # [    2.295970] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1035vm-test-run-hermes-remote> server # [    2.296988] systemd[1]: Stopped Virtual Console Setup.1036vm-test-run-hermes-remote> client # [    2.440291] systemd[1]: Mounting /sysroot/tmp/shared...1037vm-test-run-hermes-remote> server # [    2.298120] systemd[1]: Stopping Virtual Console Setup...1038vm-test-run-hermes-remote> server # [    2.298684] systemd[1]: Starting Virtual Console Setup...1039vm-test-run-hermes-remote> server # [    2.301643] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1040vm-test-run-hermes-remote> server # [    2.302369] systemd[1]: Stopped Virtual Console Setup.1041vm-test-run-hermes-remote> client # [    2.444843] systemd[1]: Mounting /sysroot/tmp/xchg...1042vm-test-run-hermes-remote> server # [    2.305322] systemd[1]: Starting Virtual Console Setup...1043vm-test-run-hermes-remote> server # [    2.316766] virtiofs virtio7: discovered new tag: shared1044vm-test-run-hermes-remote> client # [    2.451376] systemd[1]: Starting Mountpoints Configured in the Real Root...1045vm-test-run-hermes-remote> server # [    2.317469] virtiofs virtio7: virtio_fs_setup_dax: No cache capability1046vm-test-run-hermes-remote> server # [    2.319737] virtiofs virtio8: discovered new tag: xchg1047vm-test-run-hermes-remote> server # [    2.321124] virtiofs virtio8: virtio_fs_setup_dax: No cache capability1048vm-test-run-hermes-remote> client # [    2.454247] systemd[1]: Mounted /sysroot/nix/.ro-store.1049vm-test-run-hermes-remote> client # [    2.456656] systemd[1]: Mounted /sysroot/nix/.rw-store.1050vm-test-run-hermes-remote> client # [    2.459699] systemd[1]: Mounted /sysroot/run.1051vm-test-run-hermes-remote> client # [    2.460301] systemd[1]: Mounted /sysroot/tmp/xchg.1052vm-test-run-hermes-remote> client # [    2.461847] systemd[1]: Mounted /sysroot/tmp/shared.1053vm-test-run-hermes-remote> client # [    2.466828] systemd-sysroot-fstab-check[140]: /sysroot should be mounted in the initrd, will request daemon-reload.1054vm-test-run-hermes-remote> client # [    2.471088] systemd[1]: Reload requested from client PID 140 ('systemd-sysroot') (unit initrd-parse-etc.service)...1055vm-test-run-hermes-remote> client # [    2.472164] systemd[1]: Reloading...1056vm-test-run-hermes-remote> server # [    2.331871] systemd-vconsole-setup[158]: Configuration of first virtual console was skipped, ignoring remaining ones.1057vm-test-run-hermes-remote> server # [    2.333238] systemd[1]: Finished Virtual Console Setup.1058vm-test-run-hermes-remote> server # [    2.393942] systemd[1]: Mounting /sysroot...1059vm-test-run-hermes-remote> client # [    2.554551] systemd[1]: Reloading finished in 81 ms.1060vm-test-run-hermes-remote> server # [    2.422775] systemd[1]: Mounted /sysroot.1061vm-test-run-hermes-remote> server # [    2.423884] systemd[1]: Reached target Initrd Root File System.[    2.431542] EXT4-fs (vda): mounted filesystem a48a1af0-db65-413f-9c68-2c70f419a4be r/w with ordered data mode. Quota mode: none.1062vm-test-run-hermes-remote> server # 1063vm-test-run-hermes-remote> server # [    2.428091] systemd[1]: Mounting /sysroot/nix/.ro-store...1064vm-test-run-hermes-remote> server # [    2.429690] systemd[1]: Mounting /sysroot/nix/.rw-store...1065vm-test-run-hermes-remote> server # [    2.431431] systemd[1]: Mounting /sysroot/run...1066vm-test-run-hermes-remote> client # [    2.590924] systemd-sysroot-fstab-check[140]: Requesting initrd-fs.target/start/replace...1067vm-test-run-hermes-remote> client # [    2.593267] systemd-sysroot-fstab-check[140]: Requesting swap.target/start/replace...1068vm-test-run-hermes-remote> client # [    2.596436] systemd[1]: Starting rw-sysroot-nix-store.service...1069vm-test-run-hermes-remote> server # [    2.458486] systemd[1]: Mounting /sysroot/tmp/shared...1070vm-test-run-hermes-remote> client # [    2.600362] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1071vm-test-run-hermes-remote> server # [    2.460448] systemd[1]: Mounting /sysroot/tmp/xchg...1072vm-test-run-hermes-remote> client # [    2.603127] systemd[1]: Stopped Virtual Console Setup.1073vm-test-run-hermes-remote> client # [    2.604699] systemd[1]: Stopping Virtual Console Setup...1074vm-test-run-hermes-remote> client # [    2.606145] systemd[1]: Starting Virtual Console Setup...1075vm-test-run-hermes-remote> server # [    2.463976] systemd[1]: Starting Mountpoints Configured in the Real Root...1076vm-test-run-hermes-remote> client # [    2.607485] systemd[1]: initrd-parse-etc.service: Deactivated successfully.1077vm-test-run-hermes-remote> server # [    2.470872] systemd[1]: Mounted /sysroot/nix/.ro-store.1078vm-test-run-hermes-remote> client # [    2.613848] systemd[1]: Finished Mountpoints Configured in the Real Root.1079vm-test-run-hermes-remote> server # [    2.472405] systemd[1]: Mounted /sysroot/nix/.rw-store.1080vm-test-run-hermes-remote> server # [    2.473717] systemd[1]: Mounted /sysroot/run.1081vm-test-run-hermes-remote> client # [    2.615531] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.1082vm-test-run-hermes-remote> server # [    2.477749] systemd[1]: Mounted /sysroot/tmp/shared.1083vm-test-run-hermes-remote> server # [    2.479863] systemd[1]: Mounted /sysroot/tmp/xchg.1084vm-test-run-hermes-remote> client # [    2.625761] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1085vm-test-run-hermes-remote> client # [    2.627530] systemd[1]: Finished rw-sysroot-nix-store.service.1086vm-test-run-hermes-remote> server # [    2.486138] systemd-sysroot-fstab-check[172]: /sysroot should be mounted in the initrd, will request daemon-reload.1087vm-test-run-hermes-remote> server # [    2.488777] systemd[1]: Starting rw-sysroot-nix-store.service...1088vm-test-run-hermes-remote> client # [    2.630678] systemd-vconsole-setup[161]: Configuration of first virtual console was skipped, ignoring remaining ones.1089vm-test-run-hermes-remote> client # [    2.633603] systemd[1]: Finished Virtual Console Setup.1090vm-test-run-hermes-remote> server # [    2.491775] systemd[1]: Reload requested from client PID 172 ('systemd-sysroot') (unit initrd-parse-etc.service)...1091vm-test-run-hermes-remote> server # [    2.494674] systemd[1]: Reloading...1092vm-test-run-hermes-remote> server # [    2.620373] systemd[1]: Reloading finished in 127 ms.1093vm-test-run-hermes-remote> server # [    2.665152] systemd-sysroot-fstab-check[172]: Requesting initrd-fs.target/start/replace...1094vm-test-run-hermes-remote> server # [    2.667167] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1095vm-test-run-hermes-remote> server # [    2.669185] systemd[1]: Finished rw-sysroot-nix-store.service.1096vm-test-run-hermes-remote> server # [    2.670679] systemd-sysroot-fstab-check[172]: Requesting swap.target/start/replace...1097vm-test-run-hermes-remote> server # [    2.673282] systemd[1]: initrd-parse-etc.service: Deactivated successfully.1098vm-test-run-hermes-remote> server # [    2.674987] systemd[1]: Finished Mountpoints Configured in the Real Root.1099vm-test-run-hermes-remote> server # [    2.676677] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.1100vm-test-run-hermes-remote> server # [    2.678527] systemd[1]: Starting rw-sysroot-nix-store.service...1101vm-test-run-hermes-remote> server # [    2.701177] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1102vm-test-run-hermes-remote> server # [    2.702961] systemd[1]: Finished rw-sysroot-nix-store.service.1103vm-test-run-hermes-remote> client # [    3.380130] systemd[1]: Mounting /sysroot/nix/store...1104vm-test-run-hermes-remote> client # [    3.435687] systemd[1]: Mounted /sysroot/nix/store.1105vm-test-run-hermes-remote> client # [    3.437237] systemd[1]: Reached target Initrd File Systems.1106vm-test-run-hermes-remote> client # [    3.438618] systemd[1]: Starting Find NixOS closure...1107vm-test-run-hermes-remote> client # [    3.444409] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...1108vm-test-run-hermes-remote> client # [    3.477863] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.1109vm-test-run-hermes-remote> client # [    3.479796] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.1110vm-test-run-hermes-remote> client # [    3.491024] systemd[1]: Finished Find NixOS closure.1111vm-test-run-hermes-remote> client # [    3.492340] systemd[1]: Reached target Initrd Default Target.1112vm-test-run-hermes-remote> client # [    3.494341] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...1113vm-test-run-hermes-remote> client # [    3.523769] systemd[1]: Stopped target Initrd Default Target.1114vm-test-run-hermes-remote> client # [    3.525525] systemd[1]: Stopped target Basic System.1115vm-test-run-hermes-remote> client # [    3.526757] systemd[1]: Stopped target Initrd Root Device.1116vm-test-run-hermes-remote> client # [    3.528259] systemd[1]: Stopped target Path Units.1117vm-test-run-hermes-remote> client # [    3.529505] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.1118vm-test-run-hermes-remote> client # [    3.531276] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.1119vm-test-run-hermes-remote> client # [    3.533510] systemd[1]: Stopped target Slice Units.1120vm-test-run-hermes-remote> client # [    3.534719] systemd[1]: Stopped target Socket Units.1121vm-test-run-hermes-remote> client # [    3.536037] systemd[1]: Stopped target System Initialization.1122vm-test-run-hermes-remote> server # [    3.394219] systemd[1]: Mounting /sysroot/nix/store...1123vm-test-run-hermes-remote> client # [    3.537450] systemd[1]: Stopped target Swaps.1124vm-test-run-hermes-remote> client # [    3.538539] systemd[1]: Stopped target Timer Units.1125vm-test-run-hermes-remote> client # [    3.539748] systemd[1]: dbus.socket: Deactivated successfully.1126vm-test-run-hermes-remote> client # [    3.541327] systemd[1]: Closed D-Bus System Message Bus Socket.1127vm-test-run-hermes-remote> client # [    3.542790] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.1128vm-test-run-hermes-remote> client # [    3.549917] systemd[1]: Stopped Find NixOS closure.1129vm-test-run-hermes-remote> client # [    3.553000] systemd[1]: Starting rw-sysroot-nix-store.service...1130vm-test-run-hermes-remote> client # [    3.555947] systemd[1]: systemd-sysctl.service: Deactivated successfully.1131vm-test-run-hermes-remote> client # [    3.557827] systemd[1]: Stopped Apply Kernel Variables.1132vm-test-run-hermes-remote> client # [    3.558934] systemd[1]: systemd-modules-load.service: Deactivated successfully.1133vm-test-run-hermes-remote> client # [    3.560983] systemd[1]: Stopped Load Kernel Modules.1134vm-test-run-hermes-remote> client # [    3.562051] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.1135vm-test-run-hermes-remote> client # [    3.563802] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.1136vm-test-run-hermes-remote> client # [    3.565789] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.1137vm-test-run-hermes-remote> client # [    3.567263] systemd[1]: Stopped Create System Files and Directories.1138vm-test-run-hermes-remote> client # [    3.568447] systemd[1]: Stopped target Local File Systems.1139vm-test-run-hermes-remote> client # [    3.569982] systemd[1]: Stopped target Preparation for Local File Systems.1140vm-test-run-hermes-remote> client # [    3.571156] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.1141vm-test-run-hermes-remote> client # [    3.576264] systemd[1]: Stopped Coldplug All udev Devices.1142vm-test-run-hermes-remote> client # [    3.577442] systemd[1]: Stopping Rule-based Manager for Device Events and Files...1143vm-test-run-hermes-remote> client # [    3.578504] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1144vm-test-run-hermes-remote> client # [    3.579540] systemd[1]: Stopped Virtual Console Setup.1145vm-test-run-hermes-remote> client # [    3.580462] systemd[1]: initrd-cleanup.service: Deactivated successfully.1146vm-test-run-hermes-remote> client # [    3.581564] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.1147vm-test-run-hermes-remote> client # [    3.582483] systemd[1]: systemd-udevd.service: Deactivated successfully.1148vm-test-run-hermes-remote> client # [    3.583407] systemd[1]: Stopped Rule-based Manager for Device Events and Files.1149vm-test-run-hermes-remote> client # [    3.584644] systemd[1]: systemd-udevd.service: Consumed 1.263s CPU time over 2.105s wall clock time, 27.6M memory peak.1150vm-test-run-hermes-remote> client # [    3.585982] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.1151vm-test-run-hermes-remote> client # [    3.586932] systemd[1]: Closed udev Control Socket.1152vm-test-run-hermes-remote> client # [    3.587637] systemd[1]: Starting Cleanup udev Database...1153vm-test-run-hermes-remote> client # [    3.588654] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.1154vm-test-run-hermes-remote> client # [    3.589625] systemd[1]: Stopped Create Static Device Nodes in /dev.1155vm-test-run-hermes-remote> client # [    3.590432] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.1156vm-test-run-hermes-remote> client # [    3.591450] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.1157vm-test-run-hermes-remote> client # [    3.592460] systemd[1]: kmod-static-nodes.service: Deactivated successfully.1158vm-test-run-hermes-remote> client # [    3.593524] systemd[1]: Stopped Create List of Static Device Nodes.1159vm-test-run-hermes-remote> client # [    3.594329] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1160vm-test-run-hermes-remote> client # [    3.595347] systemd[1]: Finished rw-sysroot-nix-store.service.1161vm-test-run-hermes-remote> server # [    3.456052] systemd[1]: Mounted /sysroot/nix/store.1162vm-test-run-hermes-remote> server # [    3.457400] systemd[1]: Reached target Initrd File Systems.1163vm-test-run-hermes-remote> server # [    3.459144] systemd[1]: Starting Find NixOS closure...1164vm-test-run-hermes-remote> server # [    3.460639] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...1165vm-test-run-hermes-remote> client # [    3.626695] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.1166vm-test-run-hermes-remote> client # [    3.628694] systemd[1]: Finished Cleanup udev Database.1167vm-test-run-hermes-remote> client # [    3.629999] systemd[1]: Reached target Switch Root.1168vm-test-run-hermes-remote> client # [    3.631293] systemd[1]: Starting NixOS Activation...1169vm-test-run-hermes-remote> server # [    3.494080] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.1170vm-test-run-hermes-remote> server # [    3.496138] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.1171vm-test-run-hermes-remote> server # [    3.512689] systemd[1]: Finished Find NixOS closure.1172vm-test-run-hermes-remote> server # [    3.513996] systemd[1]: Reached target Initrd Default Target.1173vm-test-run-hermes-remote> server # [    3.515409] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...1174vm-test-run-hermes-remote> server # [    3.555683] systemd[1]: Stopped target Initrd Default Target.1175vm-test-run-hermes-remote> server # [    3.557300] systemd[1]: Stopped target Basic System.1176vm-test-run-hermes-remote> server # [    3.558572] systemd[1]: Stopped target Initrd Root Device.1177vm-test-run-hermes-remote> server # [    3.559913] systemd[1]: Stopped target Path Units.1178vm-test-run-hermes-remote> server # [    3.561308] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.1179vm-test-run-hermes-remote> server # [    3.563171] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.1180vm-test-run-hermes-remote> server # [    3.565183] systemd[1]: Stopped target Slice Units.1181vm-test-run-hermes-remote> server # [    3.567446] systemd[1]: Stopped target Socket Units.1182vm-test-run-hermes-remote> server # [    3.570581] systemd[1]: Stopped target System Initialization.1183vm-test-run-hermes-remote> server # [    3.571976] systemd[1]: Stopped target Swaps.1184vm-test-run-hermes-remote> server # [    3.573108] systemd[1]: Stopped target Timer Units.1185vm-test-run-hermes-remote> server # [    3.574343] systemd[1]: dbus.socket: Deactivated successfully.1186vm-test-run-hermes-remote> server # [    3.576723] systemd[1]: Closed D-Bus System Message Bus Socket.1187vm-test-run-hermes-remote> server # [    3.578194] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.1188vm-test-run-hermes-remote> server # [    3.580187] systemd[1]: Stopped Find NixOS closure.1189vm-test-run-hermes-remote> server # [    3.581503] systemd[1]: Starting rw-sysroot-nix-store.service...1190vm-test-run-hermes-remote> server # [    3.583012] systemd[1]: systemd-sysctl.service: Deactivated successfully.1191vm-test-run-hermes-remote> server # [    3.584727] systemd[1]: Stopped Apply Kernel Variables.1192vm-test-run-hermes-remote> server # [    3.586090] systemd[1]: systemd-modules-load.service: Deactivated successfully.1193vm-test-run-hermes-remote> server # [    3.588131] systemd[1]: Stopped Load Kernel Modules.1194vm-test-run-hermes-remote> client # [    3.732142] initrd-nixos-activation-start[186]: booting system configuration /nix/store/k5xq0s35yf4bjp9pgsil53xi6vwd0h1j-nixos-system-client-test1195vm-test-run-hermes-remote> server # [    3.589609] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.1196vm-test-run-hermes-remote> server # [    3.591719] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.1197vm-test-run-hermes-remote> server # [    3.593987] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.1198vm-test-run-hermes-remote> server # [    3.595912] systemd[1]: Stopped Create System Files and Directories.1199vm-test-run-hermes-remote> server # [    3.597628] systemd[1]: Stopped target Local File Systems.1200vm-test-run-hermes-remote> server # [    3.599039] systemd[1]: Stopped target Preparation for Local File Systems.1201vm-test-run-hermes-remote> server # [    3.600815] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.1202vm-test-run-hermes-remote> server # [    3.602584] systemd[1]: Stopped Coldplug All udev Devices.1203vm-test-run-hermes-remote> server # [    3.604107] systemd[1]: Stopping Rule-based Manager for Device Events and Files...1204vm-test-run-hermes-remote> server # [    3.605940] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1205vm-test-run-hermes-remote> server # [    3.607708] systemd[1]: Stopped Virtual Console Setup.1206vm-test-run-hermes-remote> server # [    3.609125] systemd[1]: initrd-cleanup.service: Deactivated successfully.1207vm-test-run-hermes-remote> server # [    3.610759] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.1208vm-test-run-hermes-remote> server # [    3.612404] systemd[1]: systemd-udevd.service: Deactivated successfully.1209vm-test-run-hermes-remote> server # [    3.613990] systemd[1]: Stopped Rule-based Manager for Device Events and Files.1210vm-test-run-hermes-remote> server # [    3.615783] systemd[1]: systemd-udevd.service: Consumed 1.725s CPU time over 2.115s wall clock time, 34.9M memory peak.1211vm-test-run-hermes-remote> server # [    3.618252] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.1212vm-test-run-hermes-remote> server # [    3.619960] systemd[1]: Finished rw-sysroot-nix-store.service.1213vm-test-run-hermes-remote> server # [    3.621208] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.1214vm-test-run-hermes-remote> client # [    3.764584] initrd-nixos-activation-start[186]: running activation script...1215vm-test-run-hermes-remote> server # [    3.622996] systemd[1]: Closed udev Control Socket.1216vm-test-run-hermes-remote> server # [    3.624309] systemd[1]: Starting Cleanup udev Database...1217vm-test-run-hermes-remote> server # [    3.625440] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.1218vm-test-run-hermes-remote> server # [    3.627190] systemd[1]: Stopped Create Static Device Nodes in /dev.1219vm-test-run-hermes-remote> server # [    3.628372] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.1220vm-test-run-hermes-remote> server # [    3.629908] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.1221vm-test-run-hermes-remote> server # [    3.631361] systemd[1]: kmod-static-nodes.service: Deactivated successfully.1222vm-test-run-hermes-remote> server # [    3.632690] systemd[1]: Stopped Create List of Static Device Nodes.1223vm-test-run-hermes-remote> server # [    3.657790] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.1224vm-test-run-hermes-remote> server # [    3.659756] systemd[1]: Finished Cleanup udev Database.1225vm-test-run-hermes-remote> server # [    3.661244] systemd[1]: Reached target Switch Root.1226vm-test-run-hermes-remote> server # [    3.662566] systemd[1]: Starting NixOS Activation...1227vm-test-run-hermes-remote> server # [    3.804724] initrd-nixos-activation-start[218]: booting system configuration /nix/store/dqbdqwjz05d8cjz1drbbf16a43l6hdaf-nixos-system-server-test1228vm-test-run-hermes-remote> server # [    3.865156] initrd-nixos-activation-start[218]: running activation script...1229vm-test-run-hermes-remote> client # [    4.024940] initrd-nixos-activation-start[211]: setting up /etc...1230vm-test-run-hermes-remote> client # [    4.157950] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.1231vm-test-run-hermes-remote> client # [    4.159315] systemd[1]: Finished NixOS Activation.1232vm-test-run-hermes-remote> client # [    4.160280] systemd[1]: Starting Switch Root...1233vm-test-run-hermes-remote> client # [    4.183028] systemd[1]: Switching root.1234vm-test-run-hermes-remote> client # [    4.305984] systemd-journald[78]: Received SIGTERM from PID 1 (systemd).1235vm-test-run-hermes-remote> server # [    4.197079] initrd-nixos-activation-start[244]: setting up /etc...1236vm-test-run-hermes-remote> server # [    4.385232] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.1237vm-test-run-hermes-remote> server # [    4.387078] systemd[1]: Finished NixOS Activation.1238vm-test-run-hermes-remote> server # [    4.388365] systemd[1]: Starting Switch Root...1239vm-test-run-hermes-remote> server # [    4.426874] systemd[1]: Switching root.1240vm-test-run-hermes-remote> server # [    4.585164] systemd-journald[93]: Received SIGTERM from PID 1 (systemd).1241vm-test-run-hermes-remote> client # [    6.599718] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)1242vm-test-run-hermes-remote> client # [    6.599819] systemd[1]: Detected virtualization qemu.1243vm-test-run-hermes-remote> client # [    6.599879] systemd[1]: Detected architecture arm64.1244vm-test-run-hermes-remote> client # [    6.599993] systemd[1]: Detected first boot.1245vm-test-run-hermes-remote> client # [    6.602181] systemd[1]: Initializing machine ID from random generator.1246vm-test-run-hermes-remote> server # [    6.508248] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)1247vm-test-run-hermes-remote> server # [    6.508341] systemd[1]: Detected virtualization qemu.1248vm-test-run-hermes-remote> server # [    6.508391] systemd[1]: Detected architecture arm64.1249vm-test-run-hermes-remote> server # [    6.508510] systemd[1]: Detected first boot.1250vm-test-run-hermes-remote> server # [    6.510840] systemd[1]: Initializing machine ID from random generator.1251vm-test-run-hermes-remote> client # [    6.798766] systemd[1]: bpf-restrict-fs: LSM BPF program attached1252vm-test-run-hermes-remote> server # [    6.760435] systemd[1]: bpf-restrict-fs: LSM BPF program attached1253vm-test-run-hermes-remote> client # [    6.911982] systemd[1]: Applying preset policy.1254vm-test-run-hermes-remote> server # [    6.825089] NET: Registered PF_VSOCK protocol family1255vm-test-run-hermes-remote> server # [    6.837530] Guest personality initialized and is inactive1256vm-test-run-hermes-remote> server # [    6.838905] VMCI host device registered (name=vmci, major=10, minor=261)1257vm-test-run-hermes-remote> server # [    6.839899] Initialized host personality1258vm-test-run-hermes-remote> server # [    6.962975] systemd[1]: Applying preset policy.1259vm-test-run-hermes-remote> client # [    7.102629] systemd[1]: Populated /etc with preset unit settings.1260vm-test-run-hermes-remote> server # [    7.164469] systemd[1]: Populated /etc with preset unit settings.1261vm-test-run-hermes-remote> client # [    7.333417] systemd[1]: initrd-switch-root.service: Deactivated successfully.1262vm-test-run-hermes-remote> client # [    7.334056] systemd[1]: Stopped initrd-switch-root.service.1263vm-test-run-hermes-remote> client # [    7.335393] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.1264vm-test-run-hermes-remote> client # [    7.336809] systemd[1]: Created slice Slice /system/getty.1265vm-test-run-hermes-remote> client # [    7.338984] systemd[1]: Created slice User and Session Slice.1266vm-test-run-hermes-remote> client # [    7.339627] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.1267vm-test-run-hermes-remote> client # [    7.340289] systemd[1]: Started Forward Password Requests to Wall Directory Watch.1268vm-test-run-hermes-remote> client # [    7.340886] systemd[1]: Expecting device /dev/hvc0...1269vm-test-run-hermes-remote> client # [    7.341488] systemd[1]: Expecting device /dev/ttyAMA0...1270vm-test-run-hermes-remote> client # [    7.342185] systemd[1]: Reached target Local Encrypted Volumes.1271vm-test-run-hermes-remote> client # [    7.342783] systemd[1]: Stopped target initrd-fs.target.1272vm-test-run-hermes-remote> client # [    7.343376] systemd[1]: Stopped target initrd-root-fs.target.1273vm-test-run-hermes-remote> client # [    7.343974] systemd[1]: Stopped target initrd-switch-root.target.1274vm-test-run-hermes-remote> client # [    7.344576] systemd[1]: Reached target Virtual Machines and Containers.1275vm-test-run-hermes-remote> client # [    7.345172] systemd[1]: Reached target Path Units.1276vm-test-run-hermes-remote> client # [    7.345941] systemd[1]: Reached target Remote File Systems.1277vm-test-run-hermes-remote> client # [    7.346514] systemd[1]: Reached target Slice Units.1278vm-test-run-hermes-remote> client # [    7.347079] systemd[1]: Reached target Swaps.1279vm-test-run-hermes-remote> client # [    7.349518] systemd[1]: Listening on Query the User Interactively for a Password.1280vm-test-run-hermes-remote> client # [    7.351936] systemd[1]: Listening on Process Core Dump Socket.1281vm-test-run-hermes-remote> client # [    7.353784] systemd[1]: Listening on Credential Encryption/Decryption.1282vm-test-run-hermes-remote> client # [    7.355825] systemd[1]: Listening on Factory Reset Management.1283vm-test-run-hermes-remote> client # [    7.356390] systemd[1]: Listening on Hostname Service Socket.1284vm-test-run-hermes-remote> client # [    7.360057] systemd[1]: Starting Journal Log Access Socket...1285vm-test-run-hermes-remote> client # [    7.360924] systemd[1]: Listening on Journal Audit Socket.1286vm-test-run-hermes-remote> client # [    7.363786] systemd[1]: Listening on Console Output Muting Service Socket.1287vm-test-run-hermes-remote> client # [    7.364453] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.1288vm-test-run-hermes-remote> client # [    7.364992] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os1289vm-test-run-hermes-remote> client # [    7.365524] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki1290vm-test-run-hermes-remote> client # [    7.369211] systemd[1]: Listening on Disk Repartitioning Service Socket.1291vm-test-run-hermes-remote> client # [    7.369785] systemd[1]: Listening on udev Control Socket.1292vm-test-run-hermes-remote> client # [    7.370377] systemd[1]: Listening on udev Varlink Socket.1293vm-test-run-hermes-remote> client # [    7.379831] systemd[1]: Mounting Huge Pages File System...1294vm-test-run-hermes-remote> client # [    7.381528] systemd[1]: Mounting POSIX Message Queue File System...1295vm-test-run-hermes-remote> client # [    7.383775] systemd[1]: Mounting Kernel Debug File System...1296vm-test-run-hermes-remote> client # [    7.389415] systemd[1]: Mounting Kernel Trace File System...1297vm-test-run-hermes-remote> client # [    7.392252] systemd[1]: Starting Create List of Static Device Nodes...1298vm-test-run-hermes-remote> client # [    7.393621] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs1299vm-test-run-hermes-remote> client # [    7.403480] systemd[1]: Mounting Kernel Configuration File System...1300vm-test-run-hermes-remote> client # [    7.404045] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm1301vm-test-run-hermes-remote> client # [    7.404652] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore1302vm-test-run-hermes-remote> client # [    7.408589] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse1303vm-test-run-hermes-remote> client # [    7.414681] systemd[1]: Mounting FUSE Control File System...1304vm-test-run-hermes-remote> client # [    7.417832] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc671305vm-test-run-hermes-remote> client # [    7.422904] systemd[1]: Starting Journal Service...1306vm-test-run-hermes-remote> server # [    7.297774] systemd[1]: microvm@hermes-alice.service: Service uses a combination of Type=simple, ExecStartPost=, and credentials. This could lead to race conditions. Continuing.1307vm-test-run-hermes-remote> client # [    7.433287] systemd[1]: Starting Load Kernel Modules...1308vm-test-run-hermes-remote> client # [    7.451736] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...1309vm-test-run-hermes-remote> client # [    7.462263] systemd[1]: Starting Remount Root and Kernel File Systems...1310vm-test-run-hermes-remote> client # [    7.463451] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1311vm-test-run-hermes-remote> client # [    7.467787] systemd[1]: Starting Coldplug All udev Devices...1312vm-test-run-hermes-remote> client # [    7.471063] systemd[1]: Listening on Journal Log Access Socket.1313vm-test-run-hermes-remote> client # [    7.474623] systemd[1]: Finished Create List of Static Device Nodes.1314vm-test-run-hermes-remote> client # [    7.489383] systemd[1]: Queued start job for default target Multi-User System.1315vm-test-run-hermes-remote> client # [    7.490499] systemd[1]: systemd-journald.service: Deactivated successfully.1316vm-test-run-hermes-remote> client # [    7.482136] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...1317vm-test-run-hermes-remote> client # [    7.484067] systemd[1]: Mounted Huge Pages File System.1318vm-test-run-hermes-remote> client # [    7.484234] systemd-journald[281]: Collecting audit messages is enabled.1319vm-test-run-hermes-remote> client # [    7.490839] systemd[1]: Started Journal Service.1320vm-test-run-hermes-remote> client # [    7.492320] systemd-modules-load[282]: Using 2 probe threads1321vm-test-run-hermes-remote> client # [    7.493910] systemd-modules-load[282]: Module 'atkbd' is built in1322vm-test-run-hermes-remote> client # [    7.495959] systemd-modules-load[282]: Module 'loop' is built in1323vm-test-run-hermes-remote> client # [    7.497397] systemd[1]: Mounted POSIX Message Queue File System.1324vm-test-run-hermes-remote> client # [    7.498068] systemd[1]: Mounted Kernel Debug File System.1325vm-test-run-hermes-remote> client # [    7.498721] systemd[1]: Finished Load Kernel Modules.1326vm-test-run-hermes-remote> client # [    7.501550] systemd[1]: Starting Firewall...1327vm-test-run-hermes-remote> client # [    7.505447] systemd[1]: Starting Apply Kernel Variables...1328vm-test-run-hermes-remote> client # [    7.510835] systemd[1]: Mounted Kernel Trace File System.1329vm-test-run-hermes-remote> client # [    7.512328] systemd[1]: Mounted Kernel Configuration File System.1330vm-test-run-hermes-remote> client # [    7.525663] systemd[1]: Mounted FUSE Control File System.1331vm-test-run-hermes-remote> server # [    7.411764] systemd[1]: initrd-switch-root.service: Deactivated successfully.1332vm-test-run-hermes-remote> server # [    7.412365] systemd[1]: Stopped initrd-switch-root.service.1333vm-test-run-hermes-remote> server # [    7.413972] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.1334vm-test-run-hermes-remote> server # [    7.415511] systemd[1]: Created slice Slice /system/getty.1335vm-test-run-hermes-remote> client # [    7.553713] systemd-oomd[284]: No swap; memory pressure usage will be degraded1336vm-test-run-hermes-remote> server # [    7.418898] systemd[1]: Created slice Slice /system/microvm.1337vm-test-run-hermes-remote> server # [    7.422717] systemd[1]: Created slice Slice /system/microvm-macvtap-interfaces.1338vm-test-run-hermes-remote> server # [    7.426127] systemd[1]: Created slice Slice /system/microvm-pci-devices.1339vm-test-run-hermes-remote> client # [    7.560664] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.1340vm-test-run-hermes-remote> server # [    7.427255] systemd[1]: Created slice Slice /system/microvm-set-booted.1341vm-test-run-hermes-remote> server # [    7.431283] systemd[1]: Created slice Slice /system/microvm-tap-interfaces.1342vm-test-run-hermes-remote> client # [    7.565209] EXT4-fs (vda): re-mounted b410a809-bcaa-4415-b0f7-343ca6275abb.1343vm-test-run-hermes-remote> client # [    7.571677] systemd[1]: Finished Remount Root and Kernel File Systems.1344vm-test-run-hermes-remote> server # [    7.433960] systemd[1]: Created slice Slice /system/microvm-virtiofsd.1345vm-test-run-hermes-remote> client # [    7.572402] systemd[1]: Listening on Disk Image Download Service Socket.1346vm-test-run-hermes-remote> server # [    7.434995] systemd[1]: Created slice User and Session Slice.1347vm-test-run-hermes-remote> client # [    7.574539] systemd[1]: Starting Flush Journal to Persistent Storage...1348vm-test-run-hermes-remote> server # [    7.435631] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.1349vm-test-run-hermes-remote> client # [    7.575174] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore1350vm-test-run-hermes-remote> server # [    7.436213] systemd[1]: Started Forward Password Requests to Wall Directory Watch.1351vm-test-run-hermes-remote> server # [    7.436762] systemd[1]: Expecting device /dev/hvc0...1352vm-test-run-hermes-remote> client # [    7.578294] systemd[1]: Starting Load/Save OS Random Seed...1353vm-test-run-hermes-remote> client # [    7.578820] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1354vm-test-run-hermes-remote> server # [    7.437317] systemd[1]: Expecting device /dev/ttyAMA0...1355vm-test-run-hermes-remote> server # [    7.437929] systemd[1]: Reached target Local Encrypted Volumes.1356vm-test-run-hermes-remote> server # [    7.438520] systemd[1]: Stopped target initrd-fs.target.1357vm-test-run-hermes-remote> server # [    7.439088] systemd[1]: Stopped target initrd-root-fs.target.1358vm-test-run-hermes-remote> server # [    7.447554] systemd[1]: Stopped target initrd-switch-root.target.1359vm-test-run-hermes-remote> server # [    7.448454] systemd[1]: Reached target Virtual Machines and Containers.1360vm-test-run-hermes-remote> server # [    7.449150] systemd[1]: Reached target Remote File Systems.1361vm-test-run-hermes-remote> server # [    7.449862] systemd[1]: Reached target Slice Units.1362vm-test-run-hermes-remote> server # [    7.450520] systemd[1]: Reached target Swaps.1363vm-test-run-hermes-remote> server # [    7.454673] systemd[1]: Listening on Query the User Interactively for a Password.1364vm-test-run-hermes-remote> server # [    7.459217] systemd[1]: Listening on Process Core Dump Socket.1365vm-test-run-hermes-remote> server # [    7.462828] systemd[1]: Listening on Credential Encryption/Decryption.1366vm-test-run-hermes-remote> server # [    7.467056] systemd[1]: Listening on Factory Reset Management.1367vm-test-run-hermes-remote> server # [    7.468264] systemd[1]: Listening on Hostname Service Socket.1368vm-test-run-hermes-remote> server # [    7.473754] systemd[1]: Starting Journal Log Access Socket...1369vm-test-run-hermes-remote> server # [    7.475720] systemd[1]: Listening on Journal Audit Socket.1370vm-test-run-hermes-remote> server # [    7.480221] systemd[1]: Listening on Console Output Muting Service Socket.1371vm-test-run-hermes-remote> client # [    7.617678] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.1372vm-test-run-hermes-remote> server # [    7.481948] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.1373vm-test-run-hermes-remote> client # [    7.620120] systemd[1]: Finished Apply Kernel Variables.1374vm-test-run-hermes-remote> server # [    7.482992] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os1375vm-test-run-hermes-remote> client # [    7.621676] systemd[1]: Starting Create Static Device Nodes in /dev...1376vm-test-run-hermes-remote> server # [    7.483999] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki1377vm-test-run-hermes-remote> server # [    7.491543] systemd[1]: Listening on Disk Repartitioning Service Socket.1378vm-test-run-hermes-remote> server # [    7.492647] systemd[1]: Listening on udev Control Socket.1379vm-test-run-hermes-remote> server # [    7.493748] systemd[1]: Listening on udev Varlink Socket.1380vm-test-run-hermes-remote> server # [    7.499305] systemd[1]: Mounting Huge Pages File System...1381vm-test-run-hermes-remote> server # [    7.503122] systemd[1]: Mounting POSIX Message Queue File System...1382vm-test-run-hermes-remote> client # [    7.633120] systemd-journald[281]: Received client request to flush runtime journal.1383vm-test-run-hermes-remote> server # [    7.506379] systemd[1]: Mounting Kernel Debug File System...1384vm-test-run-hermes-remote> server # [    7.509216] systemd[1]: Mounting Kernel Trace File System...1385vm-test-run-hermes-remote> server # [    7.514278] systemd[1]: Starting Create List of Static Device Nodes...1386vm-test-run-hermes-remote> server # [    7.516206] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs1387vm-test-run-hermes-remote> server # [    7.519102] systemd[1]: Mounting Kernel Configuration File System...1388vm-test-run-hermes-remote> server # [    7.521540] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm1389vm-test-run-hermes-remote> server # [    7.523152] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore1390vm-test-run-hermes-remote> server # [    7.524324] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse1391vm-test-run-hermes-remote> server # [    7.530760] systemd[1]: Mounting FUSE Control File System...1392vm-test-run-hermes-remote> server # [    7.531932] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc671393vm-test-run-hermes-remote> client # [    7.668250] systemd[1]: Finished Load/Save OS Random Seed.1394vm-test-run-hermes-remote> client # [    7.668942] systemd[1]: Reached target First Boot Complete.1395vm-test-run-hermes-remote> client # [    7.671871] systemd[1]: Finished Flush Journal to Persistent Storage.1396vm-test-run-hermes-remote> server # [    7.540052] systemd[1]: Starting Journal Service...1397vm-test-run-hermes-remote> server # [    7.565265] systemd[1]: Starting Load Kernel Modules...1398vm-test-run-hermes-remote> client # [    7.699954] systemd[1]: Finished Create Static Device Nodes in /dev.1399vm-test-run-hermes-remote> client # [    7.701051] systemd[1]: Reached target Preparation for Local File Systems.1400vm-test-run-hermes-remote> client # [    7.702600] systemd[1]: Starting Rule-based Manager for Device Events and Files...1401vm-test-run-hermes-remote> server # [    7.576233] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...1402vm-test-run-hermes-remote> server # [    7.580465] systemd[1]: Starting Remount Root and Kernel File Systems...1403vm-test-run-hermes-remote> server # [    7.581491] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1404vm-test-run-hermes-remote> server # [    7.585982] systemd-journald[315]: Collecting audit messages is enabled.1405vm-test-run-hermes-remote> server # [    7.586080] systemd[1]: Starting Coldplug All udev Devices...1406vm-test-run-hermes-remote> server # [    7.597647] systemd[1]: Listening on Journal Log Access Socket.1407vm-test-run-hermes-remote> server # [    7.603912] systemd[1]: Mounted Huge Pages File System.1408vm-test-run-hermes-remote> server # [    7.605231] systemd[1]: Mounted POSIX Message Queue File System.1409vm-test-run-hermes-remote> server # [    7.606686] systemd[1]: Mounted Kernel Debug File System.1410vm-test-run-hermes-remote> server # [    7.607850] systemd[1]: Mounted Kernel Trace File System.1411vm-test-run-hermes-remote> server # [    7.611215] systemd[1]: Finished Create List of Static Device Nodes.1412vm-test-run-hermes-remote> server # [    7.612421] systemd[1]: Mounted Kernel Configuration File System.1413vm-test-run-hermes-remote> server # [    7.607671] systemd[1]: Queued start job for default target Multi-User System.1414vm-test-run-hermes-remote> server # [    7.617380] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...1415vm-test-run-hermes-remote> server # [    7.619006] systemd[1]: Started Journal Service.1416vm-test-run-hermes-remote> server # [    7.611412] systemd[1]: systemd-journald.service: Deactivated successfully.1417vm-test-run-hermes-remote> server # [    7.613792] systemd-modules-load[317]: Using 4 probe threads1418vm-test-run-hermes-remote> server # [    7.629996] systemd-oomd[318]: No swap; memory pressure usage will be degraded1419vm-test-run-hermes-remote> server # [    7.634142] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.1420vm-test-run-hermes-remote> server # [    7.635852] systemd[1]: Mounted FUSE Control File System.1421vm-test-run-hermes-remote> server # [    7.639509] systemd-modules-load[317]: Module 'atkbd' is built in1422vm-test-run-hermes-remote> server # [    7.640870] systemd-modules-load[317]: Module 'loop' is built in1423vm-test-run-hermes-remote> server # [    7.646194] systemd-modules-load[317]: Inserted module 'tap'1424vm-test-run-hermes-remote> server # [    7.658766] systemd-modules-load[317]: Inserted module 'vhost_vsock'1425vm-test-run-hermes-remote> server # [    7.660243] systemd-modules-load[317]: Inserted module 'vhost_net'1426vm-test-run-hermes-remote> server # [    7.663881] systemd[1]: Finished Load Kernel Modules.1427vm-test-run-hermes-remote> server # [    7.665964] systemd[1]: Starting Firewall...1428vm-test-run-hermes-remote> server # [    7.676408] EXT4-fs (vda): re-mounted a48a1af0-db65-413f-9c68-2c70f419a4be.1429vm-test-run-hermes-remote> server # [    7.668900] systemd[1]: Starting Apply Kernel Variables...1430vm-test-run-hermes-remote> client # [    7.814914] systemd[1]: Finished Coldplug All udev Devices.1431vm-test-run-hermes-remote> server # [    7.673616] systemd[1]: Finished Remount Root and Kernel File Systems.1432vm-test-run-hermes-remote> server # [    7.674368] systemd[1]: Listening on Disk Image Download Service Socket.1433vm-test-run-hermes-remote> server # [    7.675542] systemd[1]: Starting Flush Journal to Persistent Storage...1434vm-test-run-hermes-remote> client # [    7.818315] systemd-udevd[320]: Using default interface naming scheme 'v261'.1435vm-test-run-hermes-remote> server # [    7.676621] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore1436vm-test-run-hermes-remote> server # [    7.679537] systemd[1]: Starting Load/Save OS Random Seed...1437vm-test-run-hermes-remote> server # [    7.680238] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1438vm-test-run-hermes-remote> server # [    7.705944] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.1439vm-test-run-hermes-remote> server # [    7.709511] systemd[1]: Starting Create Static Device Nodes in /dev...1440vm-test-run-hermes-remote> client # [    7.868405] systemd[1]: Started Rule-based Manager for Device Events and Files.1441vm-test-run-hermes-remote> server # [    7.731680] systemd[1]: Finished Load/Save OS Random Seed.1442vm-test-run-hermes-remote> server # [    7.732500] systemd[1]: Reached target First Boot Complete.1443vm-test-run-hermes-remote> server # [    7.745926] systemd-journald[315]: Received client request to flush runtime journal.1444vm-test-run-hermes-remote> server # [    7.790659] systemd[1]: Finished Apply Kernel Variables.1445vm-test-run-hermes-remote> server # [    7.792489] systemd[1]: Finished Create Static Device Nodes in /dev.1446vm-test-run-hermes-remote> server # [    7.793898] systemd[1]: Reached target Preparation for Local File Systems.1447vm-test-run-hermes-remote> server # [    7.795444] systemd[1]: Starting Rule-based Manager for Device Events and Files...1448vm-test-run-hermes-remote> server # [    7.797973] systemd[1]: Finished Flush Journal to Persistent Storage.1449vm-test-run-hermes-remote> server # [    7.811252] systemd-udevd[348]: Using default interface naming scheme 'v261'.1450vm-test-run-hermes-remote> client # [    7.984758] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs1451vm-test-run-hermes-remote> server # [    7.843589] systemd[1]: Started Rule-based Manager for Device Events and Files.1452vm-test-run-hermes-remote> client # [    7.992836] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse1453vm-test-run-hermes-remote> client # [    8.050038] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.1454vm-test-run-hermes-remote> client # [    8.074882] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped.1455vm-test-run-hermes-remote> client # [    8.108254] (udev-worker)[369]: Network interface NamePolicy= disabled on kernel command line.1456vm-test-run-hermes-remote> client # [    8.115436] (udev-worker)[377]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.1457vm-test-run-hermes-remote> client # [    8.118250] (udev-worker)[377]: Network interface NamePolicy= disabled on kernel command line.1458vm-test-run-hermes-remote> server # [    7.983393] systemd[1]: Finished Coldplug All udev Devices.1459vm-test-run-hermes-remote> client # [    8.163549] systemd[1]: Condition check resulted in Virtio network device being skipped.1460vm-test-run-hermes-remote> client # [    8.165161] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore1461vm-test-run-hermes-remote> client # [    8.166982] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc671462vm-test-run-hermes-remote> client # [    8.170025] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore1463vm-test-run-hermes-remote> client # [    8.171429] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1464vm-test-run-hermes-remote> client # [    8.173111] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1465vm-test-run-hermes-remote> server # [    8.045836] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs1466vm-test-run-hermes-remote> server # [    8.060276] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse1467vm-test-run-hermes-remote> client # [    8.208912] mousedev: PS/2 mouse device common for all mice1468vm-test-run-hermes-remote> server # [    8.104521] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.1469vm-test-run-hermes-remote> client # [    8.252984] systemd[1]: Finished Firewall.1470vm-test-run-hermes-remote> server # [    8.125659] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped.1471vm-test-run-hermes-remote> server # [    8.139310] (udev-worker)[421]: Network interface NamePolicy= disabled on kernel command line.1472vm-test-run-hermes-remote> server # [    8.146329] (udev-worker)[382]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.1473vm-test-run-hermes-remote> server # [    8.148724] (udev-worker)[382]: Network interface NamePolicy= disabled on kernel command line.1474vm-test-run-hermes-remote> server # [    8.178213] systemd[1]: Condition check resulted in Virtio network device being skipped.1475vm-test-run-hermes-remote> server # [    8.179089] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore1476vm-test-run-hermes-remote> server # [    8.180173] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc671477vm-test-run-hermes-remote> server # [    8.181602] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore1478vm-test-run-hermes-remote> server # [    8.182655] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1479vm-test-run-hermes-remote> server # [    8.183508] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os1480vm-test-run-hermes-remote> client # [    8.335414] systemd[1]: Mounting /run/wrappers...1481vm-test-run-hermes-remote> server # [    8.218554] mousedev: PS/2 mouse device common for all mice1482vm-test-run-hermes-remote> client # [    8.365701] systemd[1]: Mounted /run/wrappers.1483vm-test-run-hermes-remote> client # [    8.366211] systemd[1]: Reached target Local File Systems.1484vm-test-run-hermes-remote> client # [    8.369135] systemd[1]: Listening on Boot Loader Control Service Socket.1485vm-test-run-hermes-remote> client # [    8.371076] systemd[1]: Starting register-nix-paths.service...1486vm-test-run-hermes-remote> client # [    8.375307] systemd[1]: Starting Create SUID/SGID Wrappers...1487vm-test-run-hermes-remote> client # [    8.375864] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.1488vm-test-run-hermes-remote> client # [    8.377737] systemd[1]: Starting Save Transient machine-id to Disk...1489vm-test-run-hermes-remote> client # [    8.391282] systemd[1]: Starting Create System Files and Directories...1490vm-test-run-hermes-remote> client # [    8.437997] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.1491vm-test-run-hermes-remote> client # [    8.440519] systemd[1]: Finished Save Transient machine-id to Disk.1492vm-test-run-hermes-remote> client # [    8.454847] systemd[1]: Finished Create System Files and Directories.1493vm-test-run-hermes-remote> client # [    8.460067] systemd[1]: Starting Rebuild Journal Catalog...1494vm-test-run-hermes-remote> client # [    8.462982] systemd[1]: Starting Record System Boot/Shutdown in UTMP...1495vm-test-run-hermes-remote> server # [    8.323212] systemd[1]: Finished Firewall.1496vm-test-run-hermes-remote> client # [    8.515202] systemd[1]: Finished Record System Boot/Shutdown in UTMP.1497vm-test-run-hermes-remote> client # [    8.526865] systemd[1]: Finished Rebuild Journal Catalog.1498vm-test-run-hermes-remote> client # [    8.530490] systemd[1]: Starting Update is Completed...1499vm-test-run-hermes-remote> server # [    8.402428] systemd[1]: Mounting /run/wrappers...1500vm-test-run-hermes-remote> client # [    8.573125] systemd[1]: Finished Update is Completed.1501vm-test-run-hermes-remote> server # [    8.435234] systemd[1]: Mounted /run/wrappers.1502vm-test-run-hermes-remote> server # [    8.435954] systemd[1]: Reached target Local File Systems.1503vm-test-run-hermes-remote> server # [    8.437819] systemd[1]: Listening on Boot Loader Control Service Socket.1504vm-test-run-hermes-remote> server # [    8.439543] systemd[1]: Starting register-nix-paths.service...1505vm-test-run-hermes-remote> server # [    8.442359] systemd[1]: Starting Create SUID/SGID Wrappers...1506vm-test-run-hermes-remote> server # [    8.443066] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.1507vm-test-run-hermes-remote> server # [    8.445439] systemd[1]: Starting Save Transient machine-id to Disk...1508vm-test-run-hermes-remote> server # [    8.451925] systemd[1]: Starting Create System Files and Directories...1509vm-test-run-hermes-remote> server # [    8.473231] systemd-tmpfiles[483]: /etc/tmpfiles.d/10-microvm.conf:1: Duplicate line for path "/home/alice/hermes", ignoring.1510vm-test-run-hermes-remote> server # [    8.474670] systemd-tmpfiles[483]: /etc/tmpfiles.d/10-microvm.conf:2: Duplicate line for path "/var/lib/hermes-microvm/alice/guest", ignoring.1511vm-test-run-hermes-remote> server # [    8.476406] systemd-tmpfiles[483]: /etc/tmpfiles.d/10-microvm.conf:3: Duplicate line for path "/var/lib/hermes-microvm/alice/state-vault/state", ignoring.1512vm-test-run-hermes-remote> server # [    8.493077] systemd[1]: Finished Create System Files and Directories.1513vm-test-run-hermes-remote> server # [    8.496416] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.1514vm-test-run-hermes-remote> server # [    8.498239] systemd[1]: Finished Save Transient machine-id to Disk.1515vm-test-run-hermes-remote> server # [    8.501820] systemd[1]: Starting Rebuild Journal Catalog...1516vm-test-run-hermes-remote> server # [    8.504694] systemd[1]: Starting Record System Boot/Shutdown in UTMP...1517vm-test-run-hermes-remote> server # [    8.537574] systemd[1]: Finished Record System Boot/Shutdown in UTMP.1518vm-test-run-hermes-remote> server # [    8.584444] systemd[1]: Finished Rebuild Journal Catalog.1519vm-test-run-hermes-remote> server # [    8.587593] systemd[1]: Starting Update is Completed...1520vm-test-run-hermes-remote> server # [    8.627057] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:06.0/virtio5/input/input31521vm-test-run-hermes-remote> server # [    8.632923] systemd[1]: Finished Update is Completed.1522vm-test-run-hermes-remote> client # [    8.781271] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.1523vm-test-run-hermes-remote> client # [    8.783120] systemd[1]: Finished Create SUID/SGID Wrappers.1524vm-test-run-hermes-remote> client # [    8.820424] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:06.0/virtio5/input/input31525vm-test-run-hermes-remote> server # [    8.764212] systemd[1]: Starting Virtual Console Setup...1526vm-test-run-hermes-remote> server # [    8.777368] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1527vm-test-run-hermes-remote> server # [    8.779755] systemd[1]: Stopped Virtual Console Setup.1528vm-test-run-hermes-remote> server # [    8.780715] systemd[1]: Starting Virtual Console Setup...1529vm-test-run-hermes-remote> server # [    8.790100] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.1530vm-test-run-hermes-remote> server # [    8.791415] systemd[1]: Finished Create SUID/SGID Wrappers.1531vm-test-run-hermes-remote> client # [    8.977711] systemd[1]: Finished register-nix-paths.service.1532vm-test-run-hermes-remote> client # [    8.978930] systemd[1]: Reached target System Initialization.1533vm-test-run-hermes-remote> client # [    8.979976] systemd[1]: Started Discard unused filesystem blocks once a week.1534vm-test-run-hermes-remote> client # [    8.982161] systemd[1]: Started Daily Cleanup of Temporary Directories.1535vm-test-run-hermes-remote> client # [    8.984038] systemd[1]: Reached target Timer Units.1536vm-test-run-hermes-remote> client # [    8.985544] systemd[1]: Listening on D-Bus System Message Bus Socket.1537vm-test-run-hermes-remote> client # [    8.987380] systemd[1]: Listening on Nix Daemon Socket.1538vm-test-run-hermes-remote> client # [    8.987968] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.1539vm-test-run-hermes-remote> client # [    8.990762] systemd[1]: Reached target Socket Units.1540vm-test-run-hermes-remote> client # [    8.992267] systemd[1]: Reached target Basic System.1541vm-test-run-hermes-remote> client # [    8.993075] systemd[1]: Started backdoor.service.1542vm-test-run-hermes-remote> client # [    8.994035] systemd[1]: Starting Import lastlog data into lastlog2 database...1543vm-test-run-hermes-remote> client # [    9.000071] systemd[1]: Starting Name Service Cache Daemon (nsncd)...1544vm-test-run-hermes-remote> client # [    9.000783] systemd[1]: Starting Post-Boot Actions...1545vm-test-run-hermes-remote> client # [    9.003575] systemd[1]: Started Reset console on configuration changes.1546vm-test-run-hermes-remote> client # [    9.008134] systemd[1]: Starting resolvconf update...1547vm-test-run-hermes-remote> server # [    8.890940] systemd-vconsole-setup[563]: Configuration of first virtual console was skipped, ignoring remaining ones.1548vm-test-run-hermes-remote> server # [    8.892404] systemd[1]: Finished Virtual Console Setup.1549vm-test-run-hermes-remote> client # [    9.050678] systemd[1]: Starting D-Bus System Message Bus...1550vm-test-run-hermes-remote> client # [    9.058987] systemd[1]: Starting Virtual Console Setup...1551vm-test-run-hermes-remote> client # [    9.061357] systemd[1]: Started Name Service Cache Daemon (nsncd).1552vm-test-run-hermes-remote> client # connecting to host...1553vm-test-run-hermes-remote> client # [    9.064423] nsncd[513]: Sep 25 16:36:46.038 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"1554vm-test-run-hermes-remote> client # [    9.068559] systemd[1]: Finished Post-Boot Actions.1555vm-test-run-hermes-remote> client # [    9.069032] systemd[1]: Reached target Host and Network Name Lookups.1556vm-test-run-hermes-remote> client # [    9.069580] systemd[1]: Reached target User and Group Name Lookups.1557vm-test-run-hermes-remote> client # [    9.081552] systemd[1]: Starting User Login Management...1558vm-test-run-hermes-remote> client # [    9.092307] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.1559vm-test-run-hermes-remote> client # [    9.094295] systemd[1]: Stopped Virtual Console Setup.1560vm-test-run-hermes-remote> client # [    9.103929] systemd[1]: Starting Virtual Console Setup...1561vm-test-run-hermes-remote> server # [    8.962398] systemd[1]: Finished register-nix-paths.service.1562vm-test-run-hermes-remote> server # [    8.963907] systemd[1]: Reached target System Initialization.1563vm-test-run-hermes-remote> server # [    8.965543] systemd[1]: Started hermes-microvm-timezone.path.1564vm-test-run-hermes-remote> server # [    8.967048] systemd[1]: Started Discard unused filesystem blocks once a week.1565vm-test-run-hermes-remote> server # [    8.968868] systemd[1]: Started Daily Cleanup of Temporary Directories.1566vm-test-run-hermes-remote> server # [    8.970592] systemd[1]: Reached target Path Units.1567vm-test-run-hermes-remote> server # [    8.971854] systemd[1]: Reached target Timer Units.1568vm-test-run-hermes-remote> server # [    8.973254] systemd[1]: Listening on D-Bus System Message Bus Socket.1569vm-test-run-hermes-remote> client # [    9.117860] systemd[1]: Finished Import lastlog data into lastlog2 database.1570vm-test-run-hermes-remote> server # [    8.989407] systemd[1]: Listening on dashboard forward socket for alice.1571vm-test-run-hermes-remote> server # [    8.990184] systemd[1]: Listening on Nix Daemon Socket.1572vm-test-run-hermes-remote> server # [    8.993665] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).1573vm-test-run-hermes-remote> server # [    8.994634] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.1574vm-test-run-hermes-remote> server # [    8.995765] systemd[1]: Reached target Socket Units.1575vm-test-run-hermes-remote> server # [    8.996448] systemd[1]: Reached target Basic System.1576vm-test-run-hermes-remote> server # [    8.997382] systemd[1]: Started backdoor.service.1577vm-test-run-hermes-remote> server # [    9.000245] systemd[1]: Started Enable Kernel Same-Page Merging.1578vm-test-run-hermes-remote> server # [    9.002809] systemd[1]: Starting Owner-match loopback firewall for hermes microvms...1579vm-test-run-hermes-remote> server # [    9.008439] systemd[1]: Starting Install MicroVM 'hermes-alice'...1580vm-test-run-hermes-remote> server # [    9.016125] systemd[1]: Starting Import lastlog data into lastlog2 database...1581vm-test-run-hermes-remote> server # [    9.018016] systemd[1]: Starting Name Service Cache Daemon (nsncd)...1582vm-test-run-hermes-remote> server # [    9.020619] systemd[1]: Starting Post-Boot Actions...1583vm-test-run-hermes-remote> client # [    9.167466] systemd-logind[538]: New seat seat0.1584vm-test-run-hermes-remote> server # [    9.027066] systemd[1]: Started Reset console on configuration changes.1585vm-test-run-hermes-remote> client # [    9.172275] systemd-logind[538]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)1586vm-test-run-hermes-remote> client # [    9.174816] systemd-logind[538]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard)1587vm-test-run-hermes-remote> client # [    9.177801] systemd-logind[538]: Watching system buttons on /dev/input/event0 (gpio-keys)1588vm-test-run-hermes-remote> client # [    9.180653] dbus-broker-launch[521]: Looking up NSS user entry for 'systemd-timesync'...1589vm-test-run-hermes-remote> client # [    9.181395] systemd[1]: Started User Login Management.1590vm-test-run-hermes-remote> client # [    9.181858] systemd[1]: Starting linger-users.service...1591vm-test-run-hermes-remote> client # [    9.187640] dbus-broker-launch[521]: NSS returned no entry for 'systemd-timesync'1592vm-test-run-hermes-remote> server # [    9.046407] systemd[1]: Starting resolvconf update...1593vm-test-run-hermes-remote> client # [    9.188858] dbus-broker-launch[521]: Invalid user-name in /nix/store/8ripgfcw94msvljd0v74dkb41brppqwb-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"1594vm-test-run-hermes-remote> server # [    9.057835] systemd[1]: enable-ksm.service: Deactivated successfully.1595vm-test-run-hermes-remote> server # [    9.062004] systemd[1]: Finished Post-Boot Actions.1596vm-test-run-hermes-remote> client # [    9.207461] systemd[1]: Started D-Bus System Message Bus.1597vm-test-run-hermes-remote> server # [    9.069395] systemd[1]: Starting D-Bus System Message Bus...1598vm-test-run-hermes-remote> server # connecting to host...1599vm-test-run-hermes-remote> client # [    9.226395] dbus-broker-launch[521]: Ready1600vm-test-run-hermes-remote> server: Guest shell says: b'Spawning backdoor root shell...\n'1601vm-test-run-hermes-remote> server # [    9.106100] systemd[1]: Started Name Service Cache Daemon (nsncd).1602vm-test-run-hermes-remote> server # [    9.108126] nsncd[575]: Sep 25 16:36:45.992 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"1603vm-test-run-hermes-remote> server # [    9.111370] systemd[1]: install-microvm-hermes-alice.service: Deactivated successfully.1604vm-test-run-hermes-remote> server # [    9.112741] systemd[1]: Finished Install MicroVM 'hermes-alice'.1605vm-test-run-hermes-remote> client # [    9.258948] systemd[1]: Created slice Slice /user/1000.1606vm-test-run-hermes-remote> server # [    9.115905] systemd[1]: Reached target Host and Network Name Lookups.1607vm-test-run-hermes-remote> client # [    9.260613] systemd[1]: Stopped target Host and Network Name Lookups.1608vm-test-run-hermes-remote> client # [    9.261450] systemd[1]: Stopping Host and Network Name Lookups...1609vm-test-run-hermes-remote> server # [    9.116690] systemd[1]: Reached target User and Group Name Lookups.1610vm-test-run-hermes-remote> client # [    9.262170] systemd[1]: Stopped target User and Group Name Lookups.1611vm-test-run-hermes-remote> client # [    9.262722] systemd[1]: Stopping User and Group Name Lookups...1612vm-test-run-hermes-remote> server: connected to guest root shell1613vm-test-run-hermes-remote> server # [    9.117645] systemd[1]: Setup MicroVM 'hermes-alice' devices for passthrough skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/pci-setup1614vm-test-run-hermes-remote> client # [    9.263221] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...1615vm-test-run-hermes-remote> server: (connecting took 9.62 seconds)1616vm-test-run-hermes-remote> client # [    9.263749] systemd[1]: Starting User Runtime Directory /run/user/1000...1617vm-test-run-hermes-remote> server: (finished: waiting for the VM to finish booting, in 9.62 seconds)1618vm-test-run-hermes-remote> server # [    9.118891] systemd[1]: Starting Save MicroVM 'hermes-alice' booted configuration...1619vm-test-run-hermes-remote> client # [    9.302009] systemd[1]: nscd.service: Deactivated successfully.1620vm-test-run-hermes-remote> client # [    9.302933] systemd[1]: Stopped Name Service Cache Daemon (nsncd).1621vm-test-run-hermes-remote> server # [    9.120233] systemd[1]: Starting User Login Management...1622vm-test-run-hermes-remote> server # [    9.121326] systemd[1]: Finished Import lastlog data into lastlog2 database.1623vm-test-run-hermes-remote> server # [    9.151221] dbus-broker-launch[584]: Looking up NSS user entry for 'systemd-timesync'...1624vm-test-run-hermes-remote> server # [    9.153123] dbus-broker-launch[584]: NSS returned no entry for 'systemd-timesync'1625vm-test-run-hermes-remote> server # [    9.154257] dbus-broker-launch[584]: Invalid user-name in /nix/store/7kpwv0azdn8w0fnnrq2ciy6s91120j72-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"1626vm-test-run-hermes-remote> client # [    9.305029] systemd[1]: Finished resolvconf update.1627vm-test-run-hermes-remote> client # [    9.305881] systemd[1]: linger-users.service: Deactivated successfully.1628vm-test-run-hermes-remote> client # [    9.306659] systemd[1]: Finished linger-users.service.1629vm-test-run-hermes-remote> client # [    9.309265] systemd[1]: Reached target Preparation for Network.1630vm-test-run-hermes-remote> server # [    9.167908] systemd[1]: Started D-Bus System Message Bus.1631vm-test-run-hermes-remote> client # [    9.311627] systemd[1]: Starting DHCP Client...1632vm-test-run-hermes-remote> client # [    9.317394] systemd[1]: Starting Address configuration of eth1...1633vm-test-run-hermes-remote> client # [    9.318232] systemd[1]: Starting Extra networking commands....1634vm-test-run-hermes-remote> client # [    9.320482] systemd[1]: Starting Name Service Cache Daemon (nsncd)...1635vm-test-run-hermes-remote> server # [    9.188547] dbus-broker-launch[584]: Ready1636vm-test-run-hermes-remote> client # [    9.335271] systemd[1]: Finished User Runtime Directory /run/user/1000.1637vm-test-run-hermes-remote> client # [    9.338388] systemd[1]: Starting User Manager for UID 1000...1638vm-test-run-hermes-remote> server # [    9.202021] systemd-logind[611]: New seat seat0.1639vm-test-run-hermes-remote> server # [    9.209544] systemd-logind[611]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)1640vm-test-run-hermes-remote> server # [    9.210660] systemd-logind[611]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard)1641vm-test-run-hermes-remote> server # [    9.211690] systemd-logind[611]: Watching system buttons on /dev/input/event0 (gpio-keys)1642vm-test-run-hermes-remote> server # [    9.227245] systemd[1]: Started User Login Management.1643vm-test-run-hermes-remote> server # [    9.228871] systemd[1]: Finished Owner-match loopback firewall for hermes microvms.1644vm-test-run-hermes-remote> client # [    9.370867] (systemd)[615]: pam_unix(systemd-user:session): session opened for user alice(uid=1000) by (uid=0)1645vm-test-run-hermes-remote> server # [    9.230007] systemd[1]: Finished Save MicroVM 'hermes-alice' booted configuration.1646vm-test-run-hermes-remote> server # [    9.234442] systemd[1]: Stopped target Host and Network Name Lookups.1647vm-test-run-hermes-remote> server # [    9.235110] systemd[1]: Stopping Host and Network Name Lookups...1648vm-test-run-hermes-remote> server # [    9.235694] systemd[1]: Stopped target User and Group Name Lookups.1649vm-test-run-hermes-remote> server # [    9.236430] systemd[1]: Stopping User and Group Name Lookups...1650vm-test-run-hermes-remote> server # [    9.237031] systemd[1]: Starting linger-users.service...1651vm-test-run-hermes-remote> client # [    9.379933] systemd[1]: Started Name Service Cache Daemon (nsncd).1652vm-test-run-hermes-remote> server # [    9.237546] systemd[1]: Setup MicroVM 'hermes-alice' MACVTAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/macvtap-up1653vm-test-run-hermes-remote> client # [    9.381716] systemd[1]: Reached target Host and Network Name Lookups.1654vm-test-run-hermes-remote> client # [    9.383578] nsncd[611]: Sep 25 16:36:46.357 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"1655vm-test-run-hermes-remote> client # [    9.386320] systemd[1]: Reached target User and Group Name Lookups.1656vm-test-run-hermes-remote> server # [    9.244488] systemd[1]: Starting VirtioFS daemons for MicroVM 'hermes-alice'...1657vm-test-run-hermes-remote> client # [    9.387181] systemd-logind[538]: New session '1' of user 'alice' with class 'manager' and type 'unspecified'.1658vm-test-run-hermes-remote> server # [    9.245494] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...1659vm-test-run-hermes-remote> server # [    9.247875] systemd[1]: nscd.service: Deactivated successfully.1660vm-test-run-hermes-remote> server # [    9.260515] systemd[1]: Stopped Name Service Cache Daemon (nsncd).1661vm-test-run-hermes-remote> server # [    9.268339] systemd[1]: Starting Name Service Cache Daemon (nsncd)...1662vm-test-run-hermes-remote> server # [    9.278061] systemd[1]: linger-users.service: Deactivated successfully.1663vm-test-run-hermes-remote> client # [    9.419724] systemd-vconsole-setup[547]: Configuration of first virtual console was skipped, ignoring remaining ones.1664vm-test-run-hermes-remote> server # [    9.278742] systemd[1]: Finished linger-users.service.1665vm-test-run-hermes-remote> client # [    9.421865] systemd[1]: Finished Virtual Console Setup.1666vm-test-run-hermes-remote> client # [    9.426174] systemd[615]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1667vm-test-run-hermes-remote> server # [    9.287718] systemd[1]: Finished resolvconf update.1668vm-test-run-hermes-remote> server # [    9.288691] systemd[1]: Reached target Preparation for Network.1669vm-test-run-hermes-remote> server # [    9.291333] systemd[1]: Starting DHCP Client...1670vm-test-run-hermes-remote> server # [    9.292697] nsncd[698]: Sep 25 16:36:46.177 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"1671vm-test-run-hermes-remote> server # [    9.294184] systemd[1]: Starting Address configuration of eth1...1672vm-test-run-hermes-remote> server # [    9.299262] systemd[1]: Starting Extra networking commands....1673vm-test-run-hermes-remote> server # [    9.300423] systemd[1]: Started Name Service Cache Daemon (nsncd).1674vm-test-run-hermes-remote> client # [    9.444672] network-addresses-eth1-start[609]: adding address 192.168.1.1/24... done1675vm-test-run-hermes-remote> server # [    9.303417] systemd[1]: Reached target Host and Network Name Lookups.1676vm-test-run-hermes-remote> server # [    9.304252] systemd[1]: Reached target User and Group Name Lookups.1677vm-test-run-hermes-remote> client # [    9.460110] network-addresses-eth1-start[609]: adding address 2001:db8:1::1/64... done1678vm-test-run-hermes-remote> client # [    9.469932] systemd[1]: Finished Address configuration of eth1.1679vm-test-run-hermes-remote> server # [    9.350122] network-addresses-eth1-start[718]: adding address 192.168.1.2/24... done1680vm-test-run-hermes-remote> client # [    9.497694] dhcpcd[634]: dhcpcd-10.3.2 starting1681vm-test-run-hermes-remote> server # [    9.356455] network-addresses-eth1-start[718]: adding address 2001:db8:1::2/64... done1682vm-test-run-hermes-remote> client # [    9.504236] dhcpcd[691]: dev: loaded udev1683vm-test-run-hermes-remote> server # [    9.365280] systemd[1]: Finished Address configuration of eth1.1684vm-test-run-hermes-remote> client # [    9.517973] systemd[1]: Finished Extra networking commands..1685vm-test-run-hermes-remote> client # [    9.518512] systemd[1]: Reached target Network.1686vm-test-run-hermes-remote> client # [    9.524129] systemd[1]: Starting Permit User Sessions...1687vm-test-run-hermes-remote> server # [    9.382875] dhcpcd[732]: dhcpcd-10.3.2 starting1688vm-test-run-hermes-remote> client # [    9.528243] 8021q: 802.1Q VLAN Support v1.81689vm-test-run-hermes-remote> client # [    9.528645] 8021q: adding VLAN 0 to HW filter on device eth11690vm-test-run-hermes-remote> server # [    9.387609] dhcpcd[777]: dev: loaded udev1691vm-test-run-hermes-remote> server # [    9.417072] 8021q: 802.1Q VLAN Support v1.81692vm-test-run-hermes-remote> server # [    9.417471] 8021q: adding VLAN 0 to HW filter on device eth11693vm-test-run-hermes-remote> server # [    9.411776] systemd[1]: Finished Extra networking commands..1694vm-test-run-hermes-remote> server # [    9.412462] systemd[1]: Reached target Network.1695vm-test-run-hermes-remote> server # [    9.412905] systemd[1]: Setup MicroVM 'hermes-alice' TAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/tap-up1696vm-test-run-hermes-remote> server # [    9.415218] systemd[1]: Starting SSH Daemon...1697vm-test-run-hermes-remote> server # [    9.418400] systemd[1]: Starting Permit User Sessions...1698vm-test-run-hermes-remote> client # [    9.562012] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.1699vm-test-run-hermes-remote> server # [    9.422484] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.1700vm-test-run-hermes-remote> client # [    9.576717] systemd[1]: Finished Permit User Sessions.1701vm-test-run-hermes-remote> client # [    9.584132] systemd[1]: Started Getty on tty1.1702vm-test-run-hermes-remote> client # [    9.586288] systemd[1]: Reached target Login Prompts.1703vm-test-run-hermes-remote> client # [    9.586265] cfg80211: Loading compiled-in X.509 certificates for regulatory database1704vm-test-run-hermes-remote> server # [    9.446536] systemd[1]: Finished Permit User Sessions.1705vm-test-run-hermes-remote> server # [    9.457110] sshd[795]: Server listening on 0.0.0.0 port 22.1706vm-test-run-hermes-remote> server # [    9.457854] sshd[795]: Server listening on :: port 22.1707vm-test-run-hermes-remote> server # [    9.458474] systemd[1]: Started Getty on tty1.1708vm-test-run-hermes-remote> server # [    9.458926] systemd[1]: Reached target Login Prompts.1709vm-test-run-hermes-remote> server # [    9.459434] systemd[1]: Started SSH Daemon.1710vm-test-run-hermes-remote> server # [    9.471589] cfg80211: Loading compiled-in X.509 certificates for regulatory database1711vm-test-run-hermes-remote> client # [    9.607947] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'1712vm-test-run-hermes-remote> client # [    9.608514] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'1713vm-test-run-hermes-remote> client # [    9.611827] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -21714vm-test-run-hermes-remote> client # [    9.612234] cfg80211: failed to load regulatory.db1715vm-test-run-hermes-remote> server # [    9.484046] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'1716vm-test-run-hermes-remote> server # [    9.484629] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'1717vm-test-run-hermes-remote> server # [    9.485940] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -21718vm-test-run-hermes-remote> server # [    9.486430] cfg80211: failed to load regulatory.db1719vm-test-run-hermes-remote> client # [    9.640195] systemd[615]: Queued start job for default target Main User Target.1720vm-test-run-hermes-remote> client # [    9.642300] dhcpcd[691]: eth0: waiting for carrier1721vm-test-run-hermes-remote> client # [    9.643816] dhcpcd[691]: eth0: carrier acquired[    9.642583] 8021q: adding VLAN 0 to HW filter on device eth01722vm-test-run-hermes-remote> client # 1723vm-test-run-hermes-remote> client # [    9.648985] dhcpcd[691]: DUID 00:01:00:01:32:49:5f:9e:52:54:00:12:34:561724vm-test-run-hermes-remote> client # [    9.649648] dhcpcd[691]: eth0: IAID 00:12:34:561725vm-test-run-hermes-remote> client # [    9.650049] dhcpcd[691]: eth0: adding address fe80::5054:ff:fe12:34561726vm-test-run-hermes-remote> server # [    9.518795] 8021q: adding VLAN 0 to HW filter on device eth01727vm-test-run-hermes-remote> server # [    9.508919] dhcpcd[777]: eth0: waiting for carrier1728vm-test-run-hermes-remote> server # [    9.509739] dhcpcd[777]: eth0: carrier acquired1729vm-test-run-hermes-remote> client # [    9.652631] systemd[615]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1730vm-test-run-hermes-remote> client # [    9.655011] systemd[615]: Created slice User Application Slice.1731vm-test-run-hermes-remote> client # [    9.655544] systemd[615]: Started Daily Cleanup of User's Temporary Directories.1732vm-test-run-hermes-remote> client # [    9.656558] systemd[615]: Reached target Paths.1733vm-test-run-hermes-remote> client # [    9.656989] systemd[615]: Reached target Timers.1734vm-test-run-hermes-remote> server # [    9.514921] dhcpcd[777]: DUID 00:01:00:01:32:49:5f:9e:52:54:00:12:34:561735vm-test-run-hermes-remote> client # [    9.657759] systemd[615]: Starting D-Bus User Message Bus Socket...1736vm-test-run-hermes-remote> server # [    9.515685] dhcpcd[777]: eth0: IAID 00:12:34:561737vm-test-run-hermes-remote> client # [    9.658503] systemd[615]: Starting Create User Files and Directories...1738vm-test-run-hermes-remote> server # [    9.516453] dhcpcd[777]: eth0: adding address fe80::5054:ff:fe12:34561739vm-test-run-hermes-remote> client # [    9.678231] systemd[615]: Finished Create User Files and Directories.1740vm-test-run-hermes-remote> client # [    9.690884] systemd[615]: Listening on D-Bus User Message Bus Socket.1741vm-test-run-hermes-remote> client # [    9.691496] systemd[615]: Reached target Sockets.1742vm-test-run-hermes-remote> client # [    9.691917] systemd[615]: Reached target Basic System.1743vm-test-run-hermes-remote> client # [    9.692560] systemd[1]: Started User Manager for UID 1000.1744vm-test-run-hermes-remote> client # [    9.693512] systemd[615]: Starting Run user-specific NixOS activation...1745vm-test-run-hermes-remote> client # [    9.736712] systemd[615]: Finished Run user-specific NixOS activation.1746vm-test-run-hermes-remote> client # [    9.737447] systemd[615]: Reached target Main User Target.1747vm-test-run-hermes-remote> client # [    9.737983] systemd[615]: Startup finished in 330ms.1748vm-test-run-hermes-remote> server # [    9.610743] dhcpcd[777]: eth0: soliciting a DHCP lease1749vm-test-run-hermes-remote> server # [    9.620757] dhcpcd[777]: eth0: offered 10.0.2.15 from 10.0.2.21750vm-test-run-hermes-remote> server # [    9.636245] dhcpcd[777]: eth0: probing address 10.0.2.15/241751vm-test-run-hermes-remote> server # [    9.723485] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:46,608 INFO Set uid to user 0 succeeded1752vm-test-run-hermes-remote> server # [    9.726453] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:46,612 INFO supervisord started with pid 7461753vm-test-run-hermes-remote> client # [   10.477226] dhcpcd[691]: eth0: soliciting a DHCP lease1754vm-test-run-hermes-remote> client # [   10.484929] dhcpcd[691]: eth0: offered 10.0.2.15 from 10.0.2.21755vm-test-run-hermes-remote> client # [   10.496272] dhcpcd[691]: eth0: probing address 10.0.2.15/241756vm-test-run-hermes-remote> server # [   10.732114] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:47,617 INFO spawned: 'notify' with pid 8191757vm-test-run-hermes-remote> server # [   10.737816] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:47,623 INFO spawned: 'virtiofsd-hermes-exchange' with pid 8201758vm-test-run-hermes-remote> server # [   10.744498] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:47,630 INFO spawned: 'virtiofsd-hermes-state' with pid 8211759vm-test-run-hermes-remote> server # [   10.751432] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:47,636 INFO spawned: 'virtiofsd-host-config' with pid 8221760vm-test-run-hermes-remote> server # [   10.760639] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:47,646 INFO spawned: 'virtiofsd-ro-store' with pid 8231761vm-test-run-hermes-remote> server # [   10.807611] supervisord[746]: virtiofsd-hermes-exchange [2026-09-25T16:36:47Z INFO  virtiofsd] Waiting for vhost-user socket connection...1762vm-test-run-hermes-remote> server # [   10.811332] supervisord[746]: virtiofsd-hermes-state [2026-09-25T16:36:47Z INFO  virtiofsd] Waiting for vhost-user socket connection...1763vm-test-run-hermes-remote> server # [   10.815822] supervisord[746]: virtiofsd-ro-store [2026-09-25T16:36:47Z WARN  virtiofsd::passthrough] Filesystem mounted on "/" (mount ID: 374): Filesystem does not support file handles, falling back to O_PATH FDs1764vm-test-run-hermes-remote> server # [   10.820134] supervisord[746]: virtiofsd-ro-store [2026-09-25T16:36:47Z WARN  virtiofsd::passthrough] Failed to generate a file handle for the root node, disabling file handles altogether1765vm-test-run-hermes-remote> server # [   10.823550] supervisord[746]: virtiofsd-host-config [2026-09-25T16:36:47Z INFO  virtiofsd] Waiting for vhost-user socket connection...1766vm-test-run-hermes-remote> server # [   10.826443] supervisord[746]: virtiofsd-ro-store [2026-09-25T16:36:47Z INFO  virtiofsd] Waiting for vhost-user socket connection...1767vm-test-run-hermes-remote> client # [   11.601405] dhcpcd[691]: eth0: soliciting an IPv6 router1768vm-test-run-hermes-remote> client # [   11.601622] dhcpcd[691]: eth0: Router Advertisement from fe80::21769vm-test-run-hermes-remote> client # [   11.601721] dhcpcd[691]: eth0: adding address fec0::5054:ff:fe12:3456/641770vm-test-run-hermes-remote> client # [   11.601796] dhcpcd[691]: eth0: adding route to fec0::/641771vm-test-run-hermes-remote> client # [   11.601867] dhcpcd[691]: eth0: adding default route via fe80::21772vm-test-run-hermes-remote> server # [   11.789595] dhcpcd[777]: eth0: soliciting an IPv6 router1773vm-test-run-hermes-remote> server # [   11.789824] dhcpcd[777]: eth0: Router Advertisement from fe80::21774vm-test-run-hermes-remote> server # [   11.789917] dhcpcd[777]: eth0: adding address fec0::5054:ff:fe12:3456/641775vm-test-run-hermes-remote> server # [   11.789996] dhcpcd[777]: eth0: adding route to fec0::/641776vm-test-run-hermes-remote> server # [   11.790072] dhcpcd[777]: eth0: adding default route via fe80::21777vm-test-run-hermes-remote> server # [   11.850807] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:48,736 INFO success: notify entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1778vm-test-run-hermes-remote> server # [   11.854398] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:48,736 INFO success: virtiofsd-hermes-exchange entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1779vm-test-run-hermes-remote> server # [   11.858233] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:48,736 INFO success: virtiofsd-hermes-state entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1780vm-test-run-hermes-remote> server # [   11.862006] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:48,737 INFO success: virtiofsd-host-config entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1781vm-test-run-hermes-remote> server # [   11.865770] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:48,737 INFO success: virtiofsd-ro-store entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1782vm-test-run-hermes-remote> server # [   11.869821] systemd[1]: Started VirtioFS daemons for MicroVM 'hermes-alice'.1783vm-test-run-hermes-remote> server # [   11.871510] systemd[1]: Starting MicroVM 'hermes-alice'...1784vm-test-run-hermes-remote> server # [   12.117446] systemd[1]: Started MicroVM 'hermes-alice'.1785vm-test-run-hermes-remote> server # [   12.118896] systemd[1]: Reached target microvms.target.1786vm-test-run-hermes-remote> server # [   12.341905] microvm@hermes-alice[892]: microvm@hermes-alice: Could not access KVM kernel module: No such file or directory1787vm-test-run-hermes-remote> server # [   12.378690] microvm@hermes-alice[892]: microvm@hermes-alice: failed to initialize kvm: No such file or directory1788vm-test-run-hermes-remote> server # [   12.380849] supervisord[746]: virtiofsd-hermes-exchange [2026-09-25T16:36:49Z INFO  virtiofsd] Client connected, servicing requests1789vm-test-run-hermes-remote> server # [   12.382830] systemd[1]: microvm@hermes-alice.service: Main process exited, code=exited, status=1/FAILURE1790vm-test-run-hermes-remote> server # [   12.384787] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:49,240 INFO exited: virtiofsd-hermes-exchange (exit status 0; expected)1791vm-test-run-hermes-remote> server # [   12.386850] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:49,240 INFO exited: virtiofsd-host-config (exit status 0; expected)1792vm-test-run-hermes-remote> server # [   12.388747] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:49,240 INFO exited: virtiofsd-hermes-state (exit status 0; expected)1793vm-test-run-hermes-remote> server # [   12.390698] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:49,240 INFO exited: virtiofsd-ro-store (exit status 0; expected)1794vm-test-run-hermes-remote> server # [   12.392452] supervisord[746]: virtiofsd-host-config [2026-09-25T16:36:49Z INFO  virtiofsd] Client connected, servicing requests1795vm-test-run-hermes-remote> server # [   12.394106] supervisord[746]: virtiofsd-ro-store [2026-09-25T16:36:49Z INFO  virtiofsd] Client connected, servicing requests1796vm-test-run-hermes-remote> server # [   12.395780] supervisord[746]: virtiofsd-hermes-state [2026-09-25T16:36:49Z INFO  virtiofsd] Client connected, servicing requests1797vm-test-run-hermes-remote> server # [   12.397548] supervisord[746]: virtiofsd-host-config [2026-09-25T16:36:49Z INFO  virtiofsd] Client disconnected, shutting down1798vm-test-run-hermes-remote> server # [   12.399214] supervisord[746]: virtiofsd-hermes-exchange [2026-09-25T16:36:49Z INFO  virtiofsd] Client disconnected, shutting down1799vm-test-run-hermes-remote> server # [   12.400838] supervisord[746]: virtiofsd-hermes-state [2026-09-25T16:36:49Z INFO  virtiofsd] Client disconnected, shutting down1800vm-test-run-hermes-remote> server # [   12.402492] supervisord[746]: virtiofsd-ro-store [2026-09-25T16:36:49Z INFO  virtiofsd] Client disconnected, shutting down1801vm-test-run-hermes-remote> server # [   12.441951] systemd[1]: microvm@hermes-alice.service: Failed with result 'exit-code'.1802vm-test-run-hermes-remote> server # [   12.444438] systemd[1]: microvm@hermes-alice.service: Triggering OnFailure= dependencies.1803vm-test-run-hermes-remote> server # [   12.452877] systemd[1]: Created slice Slice /system/hermes-microvm-recover.1804vm-test-run-hermes-remote> server # [   12.454584] systemd[1]: hermes-microvm-recover@hermes-alice.service: multiple trigger source candidates for exit status propagation (microvm@hermes-alice.service, microvm-set-booted@hermes-alice.service), skipping.1805vm-test-run-hermes-remote> server # [   12.458649] systemd[1]: Starting Recover MicroVM 'hermes-alice' after a failure...1806vm-test-run-hermes-remote> server # [   14.181531] dhcpcd[777]: eth0: leased 10.0.2.15 for 86400 seconds1807vm-test-run-hermes-remote> server # [   14.181742] dhcpcd[777]: eth0: adding route to 10.0.2.0/241808vm-test-run-hermes-remote> server # [   14.181856] dhcpcd[777]: eth0: adding default route via 10.0.2.21809vm-test-run-hermes-remote> server # [   14.319594] systemd[1]: Started DHCP Client.1810vm-test-run-hermes-remote> server # [   14.320957] systemd[1]: Reached target Multi-User System.1811vm-test-run-hermes-remote> server: (finished: waiting for unit multi-user.target, in 15.08 seconds)1812vm-test-run-hermes-remote> server: waiting for unit sshd.service1813vm-test-run-hermes-remote> server: (finished: waiting for unit sshd.service, in 0.04 seconds)1814vm-test-run-hermes-remote> client: waiting for unit multi-user.target1815vm-test-run-hermes-remote> client: waiting for the VM to finish booting1816vm-test-run-hermes-remote> client: Guest shell says: b'Spawning backdoor root shell...\n'1817vm-test-run-hermes-remote> client: connected to guest root shell1818vm-test-run-hermes-remote> client: (connecting took 0.00 seconds)1819vm-test-run-hermes-remote> client: (finished: waiting for the VM to finish booting, in 0.00 seconds)1820vm-test-run-hermes-remote> client # [   14.934368] dhcpcd[691]: eth0: leased 10.0.2.15 for 86400 seconds1821vm-test-run-hermes-remote> client # [   14.934544] dhcpcd[691]: eth0: adding route to 10.0.2.0/241822vm-test-run-hermes-remote> client # [   14.934659] dhcpcd[691]: eth0: adding default route via 10.0.2.21823vm-test-run-hermes-remote> client # [   15.066939] systemd[1]: Started DHCP Client.1824vm-test-run-hermes-remote> client # [   15.068376] systemd[1]: Reached target Multi-User System.1825vm-test-run-hermes-remote> client # [   15.069827] systemd[1]: Startup finished in 638ms (kernel) + 5.472s (initrd) + 8.959s (userspace) = 15.069s.1826vm-test-run-hermes-remote> client: (finished: waiting for unit multi-user.target, in 1.13 seconds)1827vm-test-run-hermes-remote> client: must succeed: install -d -m 0755 /var/lib/hermes-identity1828vm-test-run-hermes-remote> client: (finished: must succeed: install -d -m 0755 /var/lib/hermes-identity, in 0.02 seconds)1829vm-test-run-hermes-remote> client: must succeed: install -m 0400 -o alice -g users /nix/store/4npqkjq9k18nyi0s7lnnai0m83cspcv4-privkey.snakeoil /var/lib/hermes-identity/alice1830vm-test-run-hermes-remote> client: (finished: must succeed: install -m 0400 -o alice -g users /nix/store/4npqkjq9k18nyi0s7lnnai0m83cspcv4-privkey.snakeoil /var/lib/hermes-identity/alice, in 0.02 seconds)1831vm-test-run-hermes-remote> client: must fail: test -e /home/alice/.ssh1832vm-test-run-hermes-remote> client: (finished: must fail: test -e /home/alice/.ssh, in 0.02 seconds)1833vm-test-run-hermes-remote> ??? Warning (UserWarning): wait_for_unit(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1834vm-test-run-hermes-remote>     File "/nix/store/8jd7437maa67c2lshz41ajlc2wfp49j5-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391835vm-test-run-hermes-remote> server: waiting for unit microvm@hermes-alice.service1836vm-test-run-hermes-remote> server # [   17.693334] systemd[1]: microvm@hermes-alice.service: Scheduled restart job, restart counter is at 1.1837vm-test-run-hermes-remote> server # [   17.694294] systemd[1]: Stopped MicroVM 'hermes-alice'.1838vm-test-run-hermes-remote> server # [   17.697736] systemd[1]: Setup MicroVM 'hermes-alice' devices for passthrough skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/pci-setup1839vm-test-run-hermes-remote> server # [   17.701418] systemd[1]: Stopping VirtioFS daemons for MicroVM 'hermes-alice'...1840vm-test-run-hermes-remote> server # [   18.389538] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:55,275 WARN received SIGTERM indicating exit request1841vm-test-run-hermes-remote> server # [   18.389709] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:55,275 INFO waiting for notify to die1842vm-test-run-hermes-remote> server # [   21.393923] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:36:58,279 INFO waiting for notify to die1843vm-test-run-hermes-remote> server # [   23.399685] microvm-virtiofsd@hermes-alice[746]: 2026-09-25 16:37:00,285 WARN stopped: notify (terminated by SIGTERM)1844vm-test-run-hermes-remote> server # [   23.455566] systemd[1]: microvm-virtiofsd@hermes-alice.service: Deactivated successfully.1845vm-test-run-hermes-remote> server # [   23.457556] systemd[1]: Stopped VirtioFS daemons for MicroVM 'hermes-alice'.1846vm-test-run-hermes-remote> server # [   23.461935] systemd[1]: Stopping Save MicroVM 'hermes-alice' booted configuration...1847vm-test-run-hermes-remote> server # [   23.505680] systemd[1]: microvm-set-booted@hermes-alice.service: Deactivated successfully.1848vm-test-run-hermes-remote> server # [   23.507627] systemd[1]: Stopped Save MicroVM 'hermes-alice' booted configuration.1849vm-test-run-hermes-remote> server # [   23.511257] systemd[1]: Starting Save MicroVM 'hermes-alice' booted configuration...1850vm-test-run-hermes-remote> server # [   23.634867] systemd[1]: Finished Save MicroVM 'hermes-alice' booted configuration.1851vm-test-run-hermes-remote> server # [   23.636788] systemd[1]: Setup MicroVM 'hermes-alice' MACVTAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/macvtap-up1852vm-test-run-hermes-remote> server # [   23.640295] systemd[1]: Setup MicroVM 'hermes-alice' TAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/tap-up1853vm-test-run-hermes-remote> server # [   23.643531] systemd[1]: Starting VirtioFS daemons for MicroVM 'hermes-alice'...1854vm-test-run-hermes-remote> server # [   24.127207] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:01,012 INFO Set uid to user 0 succeeded1855vm-test-run-hermes-remote> server # [   24.132080] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:01,018 INFO supervisord started with pid 10871856vm-test-run-hermes-remote> server # [   25.137550] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:02,022 INFO spawned: 'notify' with pid 10971857vm-test-run-hermes-remote> server # [   25.140442] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:02,026 INFO spawned: 'virtiofsd-hermes-exchange' with pid 10981858vm-test-run-hermes-remote> server # [   25.143866] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:02,029 INFO spawned: 'virtiofsd-hermes-state' with pid 10991859vm-test-run-hermes-remote> server # [   25.150209] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:02,034 INFO spawned: 'virtiofsd-host-config' with pid 11001860vm-test-run-hermes-remote> server # [   25.156816] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:02,042 INFO spawned: 'virtiofsd-ro-store' with pid 11011861vm-test-run-hermes-remote> server # [   25.197101] supervisord[1087]: virtiofsd-ro-store [2026-09-25T16:37:02Z WARN  virtiofsd::passthrough] Filesystem mounted on "/" (mount ID: 368): Filesystem does not support file handles, falling back to O_PATH FDs1862vm-test-run-hermes-remote> server # [   25.202694] supervisord[1087]: virtiofsd-ro-store [2026-09-25T16:37:02Z WARN  virtiofsd::passthrough] Failed to generate a file handle for the root node, disabling file handles altogether1863vm-test-run-hermes-remote> server # [   25.207039] supervisord[1087]: virtiofsd-ro-store [2026-09-25T16:37:02Z INFO  virtiofsd] Waiting for vhost-user socket connection...1864vm-test-run-hermes-remote> server # [   25.209484] supervisord[1087]: virtiofsd-hermes-state [2026-09-25T16:37:02Z INFO  virtiofsd] Waiting for vhost-user socket connection...1865vm-test-run-hermes-remote> server # [   25.212071] supervisord[1087]: virtiofsd-host-config [2026-09-25T16:37:02Z INFO  virtiofsd] Waiting for vhost-user socket connection...1866vm-test-run-hermes-remote> server # [   25.216128] supervisord[1087]: virtiofsd-hermes-exchange [2026-09-25T16:37:02Z INFO  virtiofsd] Waiting for vhost-user socket connection...1867vm-test-run-hermes-remote> server # [   26.261042] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:03,146 INFO success: notify entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1868vm-test-run-hermes-remote> server # [   26.261226] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:03,147 INFO success: virtiofsd-hermes-exchange entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1869vm-test-run-hermes-remote> server # [   26.261296] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:03,147 INFO success: virtiofsd-hermes-state entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1870vm-test-run-hermes-remote> server # [   26.261353] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:03,147 INFO success: virtiofsd-host-config entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1871vm-test-run-hermes-remote> server # [   26.261440] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:03,147 INFO success: virtiofsd-ro-store entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)1872vm-test-run-hermes-remote> server # [   26.269334] systemd[1]: Started VirtioFS daemons for MicroVM 'hermes-alice'.1873vm-test-run-hermes-remote> server # [   26.282709] systemd[1]: Starting MicroVM 'hermes-alice'...1874vm-test-run-hermes-remote> server # [   26.466155] systemd[1]: Started MicroVM 'hermes-alice'.1875vm-test-run-hermes-remote> server # [   26.532643] microvm@hermes-alice[1169]: microvm@hermes-alice: Could not access KVM kernel module: No such file or directory1876vm-test-run-hermes-remote> server # [   26.535158] microvm@hermes-alice[1169]: microvm@hermes-alice: failed to initialize kvm: No such file or directory1877vm-test-run-hermes-remote> server # [   26.537646] supervisord[1087]: virtiofsd-hermes-exchange [2026-09-25T16:37:03Z INFO  virtiofsd] Client connected, servicing requests1878vm-test-run-hermes-remote> server # [   26.541676] supervisord[1087]: virtiofsd-host-config [2026-09-25T16:37:03Z INFO  virtiofsd] Client connected, servicing requests1879vm-test-run-hermes-remote> server # [   26.544376] supervisord[1087]: virtiofsd-ro-store [2026-09-25T16:37:03Z INFO  virtiofsd] Client connected, servicing requests1880vm-test-run-hermes-remote> server # [   26.546964] supervisord[1087]: virtiofsd-hermes-state [2026-09-25T16:37:03Z INFO  virtiofsd] Client connected, servicing requests1881vm-test-run-hermes-remote> server # [   26.549655] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:03,431 INFO exited: virtiofsd-hermes-exchange (exit status 0; expected)1882vm-test-run-hermes-remote> server # [   26.552616] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:03,431 INFO exited: virtiofsd-hermes-state (exit status 0; expected)1883vm-test-run-hermes-remote> server # [   26.555235] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:03,431 INFO exited: virtiofsd-ro-store (exit status 0; expected)1884vm-test-run-hermes-remote> server # [   26.558039] supervisord[1087]: virtiofsd-hermes-exchange [2026-09-25T16:37:03Z INFO  virtiofsd] Client disconnected, shutting down1885vm-test-run-hermes-remote> server # [   26.560805] systemd[1]: microvm@hermes-alice.service: Main process exited, code=exited, status=1/FAILURE1886vm-test-run-hermes-remote> server # [   26.563175] supervisord[1087]: virtiofsd-hermes-state [2026-09-25T16:37:03Z INFO  virtiofsd] Client disconnected, shutting down1887vm-test-run-hermes-remote> server # [   26.565884] microvm-virtiofsd@hermes-alice[1087]: 2026-09-25 16:37:03,447 INFO exited: virtiofsd-host-config (exit status 0; expected)1888vm-test-run-hermes-remote> server # [   26.568617] supervisord[1087]: virtiofsd-host-config [2026-09-25T16:37:03Z INFO  virtiofsd] Client disconnected, shutting down1889vm-test-run-hermes-remote> server # [   26.571083] supervisord[1087]: virtiofsd-ro-store [2026-09-25T16:37:03Z INFO  virtiofsd] Client disconnected, shutting down1890vm-test-run-hermes-remote> server # [   26.606091] systemd[1]: microvm@hermes-alice.service: Failed with result 'exit-code'.1891vm-test-run-hermes-remote> server # [   26.609335] systemd[1]: microvm@hermes-alice.service: Triggering OnFailure= dependencies.