don't know how to build these paths: /nix/store/qiiqqzc4p70x3bn6867kb1jj9k4gy8zc-vm-test-run-hermes-remote.drv warning: ignoring the client-specified setting 'store', because it is a restricted setting and you are not a trusted user building '/nix/store/j8m146xdk9p3g536wpibifasijpgldvy-hermes-desktop-remote.drv' on nix-store.geninf.io:50051 hermes-desktop-remote> gi-build-x86-02: building j8m146xdk9p3g536wpibifasijpgldvy-hermes-desktop-remote.drv building '/nix/store/qik35i4zxqcgd275gj499zr6gmwfpkbs-hermes-desktop.drv' on nix-store.geninf.io:50051 hermes-desktop> build-x86-01: building qik35i4zxqcgd275gj499zr6gmwfpkbs-hermes-desktop.drv hermes-desktop> structuredAttrs is enabled hermes-desktop-remote> structuredAttrs is enabled building '/nix/store/lc54kh77xybcrsb3h6y38d06hgkimk7b-hermes.drv' on nix-store.geninf.io:50051 hermes> build-x86-01: building lc54kh77xybcrsb3h6y38d06hgkimk7b-hermes.drv hermes> structuredAttrs is enabled building '/nix/store/24fmzk0bp34bcw3vmnxdzfavmb4wa1cg-unit-hermes-desktop.service.drv' on nix-store.geninf.io:50051 unit-hermes-desktop.service> gi-build-x86-02: building 24fmzk0bp34bcw3vmnxdzfavmb4wa1cg-unit-hermes-desktop.service.drv unit-hermes-desktop.service> structuredAttrs is enabled building '/nix/store/2q3r1gjkwngkmmzkkby1zycd7fwwy130-system-path.drv' on nix-store.geninf.io:50051 system-path> gi-build-x86-02: building 2q3r1gjkwngkmmzkkby1zycd7fwwy130-system-path.drv system-path> structuredAttrs is enabled system-path> created 6868 symlinks in user environment system-path> install-info: warning: no info dir entry in `/nix/store/ba4rgx4ly8my5snvkmdbh74j71z5ld79-system-path/share/info/gawknotes.info' building '/nix/store/783yykswfb0v9x1s83dvwnh09lzvdain-hermes-tui.drv' on nix-store.geninf.io:50051 hermes-tui> build-x86-01: building 783yykswfb0v9x1s83dvwnh09lzvdain-hermes-tui.drv hermes-tui> structuredAttrs is enabled building '/nix/store/pqqafp7xk0hnbr3m52d8x01g99hkiz1b-dbus-1.drv' on nix-store.geninf.io:50051 dbus-1> gi-build-x86-02: building pqqafp7xk0hnbr3m52d8x01g99hkiz1b-dbus-1.drv building '/nix/store/84q57kb0ygwamm8ddvfrqg7kp6drmxr0-hermes-tui.desktop.drv' on nix-store.geninf.io:50051 hermes-tui.desktop> build-x86-01: building 84q57kb0ygwamm8ddvfrqg7kp6drmxr0-hermes-tui.desktop.drv hermes-tui.desktop> structuredAttrs is enabled building '/nix/store/p78hgmfrad92hz93gyzm2xj5aaj3j3d2-X-Restart-Triggers-dbus-broker.drv' on nix-store.geninf.io:50051 X-Restart-Triggers-dbus-broker> gi-build-x86-02: building p78hgmfrad92hz93gyzm2xj5aaj3j3d2-X-Restart-Triggers-dbus-broker.drv X-Restart-Triggers-dbus-broker> structuredAttrs is enabled building '/nix/store/5lal1hrrz2q0bzyl5mk5wqwgy31avw85-unit-dbus-broker.service.drv' on nix-store.geninf.io:50051 unit-dbus-broker.service> gi-build-x86-02: building 5lal1hrrz2q0bzyl5mk5wqwgy31avw85-unit-dbus-broker.service.drv unit-dbus-broker.service> structuredAttrs is enabled building '/nix/store/f4d5iaza4bkb6r9ym7jd83g2r2grmqm0-unit-dbus-broker.service.drv' on nix-store.geninf.io:50051 unit-dbus-broker.service> gi-build-x86-02: building f4d5iaza4bkb6r9ym7jd83g2r2grmqm0-unit-dbus-broker.service.drv unit-dbus-broker.service> structuredAttrs is enabled building '/nix/store/19m236ljlmll08lhi8g7vxhr6hv5dfjs-system-path.drv' on nix-store.geninf.io:50051 system-path> gi-build-x86-02: building 19m236ljlmll08lhi8g7vxhr6hv5dfjs-system-path.drv system-path> structuredAttrs is enabled system-path> created 6872 symlinks in user environment system-path> install-info: warning: no info dir entry in `/nix/store/g238plmfd986r6amsfh0p6sm1cy0k3j0-system-path/share/info/gawknotes.info' building '/nix/store/60268hssdcpl2an3hgvbxadg5gwb6ski-system-units.drv' on nix-store.geninf.io:50051 system-units> gi-build-x86-02: building 60268hssdcpl2an3hgvbxadg5gwb6ski-system-units.drv building '/nix/store/y2ydlwc4kzr10ff4b9kxdcg2xmr2knq3-user-units.drv' on nix-store.geninf.io:50051 user-units> gi-build-x86-02: building y2ydlwc4kzr10ff4b9kxdcg2xmr2knq3-user-units.drv building '/nix/store/nh047aa8yv31avdr4j2kk4h0wp45s1dw-dbus-1.drv' on nix-store.geninf.io:50051 dbus-1> gi-build-x86-02: building nh047aa8yv31avdr4j2kk4h0wp45s1dw-dbus-1.drv building '/nix/store/j7x42v1scf5zb8xnib1kc9f47wgcrr72-etc.drv' on nix-store.geninf.io:50051 etc> gi-build-x86-02: building j7x42v1scf5zb8xnib1kc9f47wgcrr72-etc.drv building '/nix/store/39d1p7v89dv72j10lm2z0wlz5i36v83l-X-Restart-Triggers-dbus-broker.drv' on nix-store.geninf.io:50051 X-Restart-Triggers-dbus-broker> gi-build-x86-02: building 39d1p7v89dv72j10lm2z0wlz5i36v83l-X-Restart-Triggers-dbus-broker.drv X-Restart-Triggers-dbus-broker> structuredAttrs is enabled building '/nix/store/d5hfxwrb1jw8lfgnlccxlbnn2hm0l2h5-activate.drv' on nix-store.geninf.io:50051 activate> gi-build-x86-02: building d5hfxwrb1jw8lfgnlccxlbnn2hm0l2h5-activate.drv activate> structuredAttrs is enabled building '/nix/store/vhwn9frhd89p6rxi672xsc7bhr6p9wy8-unit-dbus-broker.service.drv' on nix-store.geninf.io:50051 unit-dbus-broker.service> gi-build-x86-02: building vhwn9frhd89p6rxi672xsc7bhr6p9wy8-unit-dbus-broker.service.drv unit-dbus-broker.service> structuredAttrs is enabled building '/nix/store/8089x0gdyi7jk0wwi6kc5irvcgdv6xzj-unit-dbus-broker.service.drv' on nix-store.geninf.io:50051 unit-dbus-broker.service> gi-build-x86-02: building 8089x0gdyi7jk0wwi6kc5irvcgdv6xzj-unit-dbus-broker.service.drv unit-dbus-broker.service> structuredAttrs is enabled building '/nix/store/fk7w4srgjsh7rcmih7kz6f1ggskzgaz5-nixos-system-client-test.drv' on nix-store.geninf.io:50051 nixos-system-client-test> gi-build-x86-02: building fk7w4srgjsh7rcmih7kz6f1ggskzgaz5-nixos-system-client-test.drv nixos-system-client-test> structuredAttrs is enabled building '/nix/store/b9fifqgf6xhvcpg5gi9b5yrzr8ws3mdr-system-units.drv' on nix-store.geninf.io:50051 system-units> gi-build-x86-02: building b9fifqgf6xhvcpg5gi9b5yrzr8ws3mdr-system-units.drv building '/nix/store/i99as77p414y7f4m0ms4kpg2022i3mi7-user-units.drv' on nix-store.geninf.io:50051 user-units> gi-build-x86-02: building i99as77p414y7f4m0ms4kpg2022i3mi7-user-units.drv building '/nix/store/p2gqibgynbnqcay9a09lnll8g2sj3pgi-closure-info.drv' on nix-store.geninf.io:50051 closure-info> gi-build-x86-02: building p2gqibgynbnqcay9a09lnll8g2sj3pgi-closure-info.drv building '/nix/store/8cxqq5587fj1nm001356z49qr5z4fg3l-etc.drv' on nix-store.geninf.io:50051 etc> gi-build-x86-02: building 8cxqq5587fj1nm001356z49qr5z4fg3l-etc.drv closure-info> structuredAttrs is enabled building '/nix/store/sjmj6izl53r31fbhpfwirymhw34ggaa3-run-nixos-vm.drv' on nix-store.geninf.io:50051 run-nixos-vm> gi-build-x86-02: building sjmj6izl53r31fbhpfwirymhw34ggaa3-run-nixos-vm.drv run-nixos-vm> structuredAttrs is enabled building '/nix/store/1cbd9z1lhf84hvj8ivrma219cmd3xwch-activate.drv' on nix-store.geninf.io:50051 activate> gi-build-x86-02: building 1cbd9z1lhf84hvj8ivrma219cmd3xwch-activate.drv activate> structuredAttrs is enabled building '/nix/store/3c9xhf1zsjgshlr6yc9ym9zrqhjzdgha-nixos-vm.drv' on nix-store.geninf.io:50051 nixos-vm> gi-build-x86-02: building 3c9xhf1zsjgshlr6yc9ym9zrqhjzdgha-nixos-vm.drv building '/nix/store/w9k1x42wrjifnvnbwmk1i7pwf5z3mrrm-nixos-system-server-test.drv' on nix-store.geninf.io:50051 nixos-system-server-test> gi-build-x86-02: building w9k1x42wrjifnvnbwmk1i7pwf5z3mrrm-nixos-system-server-test.drv nixos-system-server-test> structuredAttrs is enabled building '/nix/store/hjhblykxl983bnj3qjfjdfp97hfjr1jh-closure-info.drv' on nix-store.geninf.io:50051 closure-info> gi-build-x86-02: building hjhblykxl983bnj3qjfjdfp97hfjr1jh-closure-info.drv closure-info> structuredAttrs is enabled building '/nix/store/mk7npj3yg1cm71wvd0hv7qai6grs08hk-run-nixos-vm.drv' on nix-store.geninf.io:50051 run-nixos-vm> gi-build-x86-02: building mk7npj3yg1cm71wvd0hv7qai6grs08hk-run-nixos-vm.drv run-nixos-vm> structuredAttrs is enabled building '/nix/store/vgr87pg07qgy40h6cah4rcf1f1d3qsq3-nixos-vm.drv' on nix-store.geninf.io:50051 nixos-vm> gi-build-x86-02: building vgr87pg07qgy40h6cah4rcf1f1d3qsq3-nixos-vm.drv building '/nix/store/jwlwnhpi77wmlbxpizd0x0irbyhli3hy-driverConfiguration.json.drv' on nix-store.geninf.io:50051 driverConfiguration.json> gi-build-x86-02: building jwlwnhpi77wmlbxpizd0x0irbyhli3hy-driverConfiguration.json.drv driverConfiguration.json> structuredAttrs is enabled building '/nix/store/a11l78dka2w5ng04lcy0x9c4zb9qcwmg-nixos-test-driver-hermes-remote.drv' on nix-store.geninf.io:50051 nixos-test-driver-hermes-remote> gi-build-x86-02: building a11l78dka2w5ng04lcy0x9c4zb9qcwmg-nixos-test-driver-hermes-remote.drv nixos-test-driver-hermes-remote> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-hermes-remote> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-hermes-remote> All checks passed! nixos-test-driver-hermes-remote> Linting test script (enable/disable: config.skipLint) nixos-test-driver-hermes-remote> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint nixos-test-driver-hermes-remote> All checks passed! building '/nix/store/qiiqqzc4p70x3bn6867kb1jj9k4gy8zc-vm-test-run-hermes-remote.drv' on nix-store.geninf.io:50051 vm-test-run-hermes-remote> gi-build-x86-02: building qiiqqzc4p70x3bn6867kb1jj9k4gy8zc-vm-test-run-hermes-remote.drv vm-test-run-hermes-remote> Machine state will be reset. To keep it, pass --keep-machine-state vm-test-run-hermes-remote> start all VLans vm-test-run-hermes-remote> (finished: start all VLans, in 0.00 seconds) vm-test-run-hermes-remote> Test will time out and terminate in 3600.0 seconds vm-test-run-hermes-remote> run the VM test script vm-test-run-hermes-remote> additionally exposed symbols: vm-test-run-hermes-remote> client, server, vm-test-run-hermes-remote> vlan1, vm-test-run-hermes-remote> start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh vm-test-run-hermes-remote> start all VMs vm-test-run-hermes-remote> client: starting vm vm-test-run-hermes-remote> server: starting vm vm-test-run-hermes-remote> client # Disk image does not exist, creating the virtualisation disk image... vm-test-run-hermes-remote> client # Formatting '/build/vm-state-client/tmp.9OV8WiymTt', fmt=raw size=1073741824 vm-test-run-hermes-remote> client # mke2fs 1.47.4 (6-Mar-2025) vm-test-run-hermes-remote> client # Discarding device blocks: 0/262144 done vm-test-run-hermes-remote> client # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-hermes-remote> client # Filesystem UUID: 36b74c74-8705-4867-a7c0-0e330e664ce5 vm-test-run-hermes-remote> client # Superblock backups stored on blocks: vm-test-run-hermes-remote> client # 32768, 98304, 163840, 229376 vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # Allocating group tables: 0/8 done vm-test-run-hermes-remote> client # Writing inode tables: 0/8 done vm-test-run-hermes-remote> client # Creating journal (8192 blocks): done vm-test-run-hermes-remote> client # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # Virtualisation disk image created. vm-test-run-hermes-remote> client # Starting virtiofs daemons... vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-hermes-remote> client: QEMU running (pid 47) vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> client # [2026-09-25T16:05:07Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server: QEMU running (pid 48) vm-test-run-hermes-remote> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-hermes-remote> server # Formatting '/build/vm-state-server/tmp.mil67nXfH7', fmt=raw size=25769803776 vm-test-run-hermes-remote> server # mke2fs 1.47.4 (6-Mar-2025) vm-test-run-hermes-remote> server # Discarding device blocks: 0/6291456 done vm-test-run-hermes-remote> server # Creating filesystem with 6291456 4k blocks and 1572864 inodes vm-test-run-hermes-remote> server # Filesystem UUID: febd8d48-828a-4af2-960f-2952144934fb vm-test-run-hermes-remote> server # Superblock backups stored on blocks: vm-test-run-hermes-remote> server # 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, vm-test-run-hermes-remote> server # 4096000 vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # Allocating group tables: 0/192 done vm-test-run-hermes-remote> server # Writing inode tables: 0/192 done vm-test-run-hermes-remote> server # Creating journal (32768 blocks): done vm-test-run-hermes-remote> server # Writing superblocks and filesystem accounting information: 0/192 done vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # Virtualisation disk image created. vm-test-run-hermes-remote> server # Starting virtiofs daemons... vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [2026-09-25T16:05:07Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> (finished: start all VMs, in 0.10 seconds) vm-test-run-hermes-remote> server: waiting for unit multi-user.target vm-test-run-hermes-remote> server: waiting for the VM to finish booting vm-test-run-hermes-remote> client # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-hermes-remote> server # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC730+7EF2C730 CA00 vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC730+7EF2C730 CA00 vm-test-run-hermes-remote> client # Press Ctrl-B to configure iPXE (PCI 00:02.0)... vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # iPXE (http://ipxe.org) 00:05.0 CB00 PCI2.10 PnP PMM 7EFCC730 7EF2C730 CB00 vm-test-run-hermes-remote> server # Press Ctrl-B to configure iPXE (PCI 00:02.0)... vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> client # Press Ctrl-B to configure iPXE (PCI 00:05.0)... vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> server # iPXE (http://ipxe.org) 00:05.0 CB00 PCI2.10 PnP PMM 7EFCC730 7EF2C730 CB00 vm-test-run-hermes-remote> server # Press Ctrl-B to configure iPXE (PCI 00:05.0)... vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> client # Booting from ROM... vm-test-run-hermes-remote> server # Booting from ROM... vm-test-run-hermes-remote> client # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.53 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 21 13:06:06 UTC 2026 vm-test-run-hermes-remote> client # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/7pv67q5bm0bn1bnjn20hh25yc175gzqr-nixos-system-client-test/init regInfo=/nix/.ro-store/qxqryg621f1739q7hrnxfxyqwi09p4ba-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> client # [ 0.000000] BIOS-provided physical RAM map: vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] NX (Execute Disable) protection: active vm-test-run-hermes-remote> client # [ 0.000000] APIC: Static calls initialized vm-test-run-hermes-remote> client # [ 0.000000] SMBIOS 2.8 present. vm-test-run-hermes-remote> client # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 vm-test-run-hermes-remote> client # [ 0.000000] DMI: Memory slots populated: 1/1 vm-test-run-hermes-remote> client # [ 0.000000] Hypervisor detected: KVM vm-test-run-hermes-remote> client # [ 0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 vm-test-run-hermes-remote> client # [ 0.000000] kvm-clock: using sched offset of 385026408 cycles vm-test-run-hermes-remote> client # [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-hermes-remote> client # [ 0.000004] tsc: Detected 4192.088 MHz processor vm-test-run-hermes-remote> client # [ 0.000583] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.000610] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs vm-test-run-hermes-remote> client # [ 0.000612] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT vm-test-run-hermes-remote> client # [ 0.002230] found SMP MP-table at [mem 0x000f5450-0x000f545f] vm-test-run-hermes-remote> client # [ 0.002242] Using GB pages for direct mapping vm-test-run-hermes-remote> client # [ 0.002301] RAMDISK: [mem 0x7e365000-0x7ffcffff] vm-test-run-hermes-remote> client # [ 0.002306] ACPI: Early table checksum verification disabled vm-test-run-hermes-remote> client # [ 0.002308] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) vm-test-run-hermes-remote> client # [ 0.002311] ACPI: RSDT 0x000000007FFE247D 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002314] ACPI: FACP 0x000000007FFE226D 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002319] ACPI: DSDT 0x000000007FFE0040 00222D (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002320] ACPI: FACS 0x000000007FFE0000 000040 vm-test-run-hermes-remote> client # [ 0.002321] ACPI: APIC 0x000000007FFE2361 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002323] ACPI: HPET 0x000000007FFE23E1 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002324] ACPI: MCFG 0x000000007FFE2419 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002325] ACPI: WAET 0x000000007FFE2455 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002326] ACPI: Reserving FACP table memory at [mem 0x7ffe226d-0x7ffe2360] vm-test-run-hermes-remote> client # [ 0.002327] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226c] vm-test-run-hermes-remote> client # [ 0.002327] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] vm-test-run-hermes-remote> client # [ 0.002327] ACPI: Reserving APIC table memory at [mem 0x7ffe2361-0x7ffe23e0] vm-test-run-hermes-remote> client # [ 0.002328] ACPI: Reserving HPET table memory at [mem 0x7ffe23e1-0x7ffe2418] vm-test-run-hermes-remote> client # [ 0.002328] ACPI: Reserving MCFG table memory at [mem 0x7ffe2419-0x7ffe2454] vm-test-run-hermes-remote> client # [ 0.002328] ACPI: Reserving WAET table memory at [mem 0x7ffe2455-0x7ffe247c] vm-test-run-hermes-remote> client # [ 0.002664] No NUMA configuration found vm-test-run-hermes-remote> client # [ 0.002665] Faking a node at [mem 0x0000000000000000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.002667] NODE_DATA(0) allocated [mem 0x7ffd2780-0x7ffd7cff] vm-test-run-hermes-remote> client # [ 0.002730] Zone ranges: vm-test-run-hermes-remote> client # [ 0.002731] DMA [mem 0x0000000000001000-0x0000000000ffffff] vm-test-run-hermes-remote> client # [ 0.002732] DMA32 [mem 0x0000000001000000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.002733] Normal empty vm-test-run-hermes-remote> client # [ 0.002733] Device empty vm-test-run-hermes-remote> client # [ 0.002734] Movable zone start for each node vm-test-run-hermes-remote> client # [ 0.002734] Early memory node ranges vm-test-run-hermes-remote> client # [ 0.002734] node 0: [mem 0x0000000000001000-0x000000000009efff] vm-test-run-hermes-remote> client # [ 0.002735] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.002736] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.002749] On node 0, zone DMA: 1 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.002933] On node 0, zone DMA: 97 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.027700] On node 0, zone DMA32: 40 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.028481] ACPI: PM-Timer IO Port: 0x608 vm-test-run-hermes-remote> client # [ 0.028492] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) vm-test-run-hermes-remote> client # [ 0.028514] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 vm-test-run-hermes-remote> client # [ 0.028515] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) vm-test-run-hermes-remote> client # [ 0.028517] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) vm-test-run-hermes-remote> client # [ 0.028517] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) vm-test-run-hermes-remote> client # [ 0.028518] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) vm-test-run-hermes-remote> client # [ 0.028519] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) vm-test-run-hermes-remote> client # [ 0.028521] ACPI: Using ACPI (MADT) for SMP configuration information vm-test-run-hermes-remote> client # [ 0.028522] ACPI: HPET id: 0x8086a201 base: 0xfed00000 vm-test-run-hermes-remote> client # [ 0.028526] TSC deadline timer available vm-test-run-hermes-remote> client # [ 0.028529] CPU topo: Max. logical packages: 1 vm-test-run-hermes-remote> client # [ 0.028530] CPU topo: Max. logical dies: 1 vm-test-run-hermes-remote> client # [ 0.028530] CPU topo: Max. dies per package: 1 vm-test-run-hermes-remote> client # [ 0.028533] CPU topo: Max. threads per core: 1 vm-test-run-hermes-remote> client # [ 0.028533] CPU topo: Num. cores per package: 2 vm-test-run-hermes-remote> client # [ 0.028533] CPU topo: Num. threads per package: 2 vm-test-run-hermes-remote> client # [ 0.028534] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs vm-test-run-hermes-remote> client # [ 0.028549] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() vm-test-run-hermes-remote> client # [ 0.028560] kvm-guest: KVM setup pv remote TLB flush vm-test-run-hermes-remote> client # [ 0.028563] kvm-guest: setup PV sched yield vm-test-run-hermes-remote> client # [ 0.028576] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] vm-test-run-hermes-remote> client # [ 0.028577] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] vm-test-run-hermes-remote> client # [ 0.028578] [mem 0xc0000000-0xfed1bfff] available for PCI devices vm-test-run-hermes-remote> client # [ 0.028579] Booting paravirtualized kernel on KVM vm-test-run-hermes-remote> client # [ 0.028582] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns vm-test-run-hermes-remote> client # [ 0.031776] setup_percpu: NR_CPUS:384 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 vm-test-run-hermes-remote> client # [ 0.033405] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u1048576 vm-test-run-hermes-remote> client # [ 0.033442] kvm-guest: PV spinlocks enabled vm-test-run-hermes-remote> client # [ 0.033443] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) vm-test-run-hermes-remote> client # [ 0.033445] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/7pv67q5bm0bn1bnjn20hh25yc175gzqr-nixos-system-client-test/init regInfo=/nix/.ro-store/qxqryg621f1739q7hrnxfxyqwi09p4ba-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> client # [ 0.033511] Unknown kernel command line parameters "regInfo=/nix/.ro-store/qxqryg621f1739q7hrnxfxyqwi09p4ba-closure-info/registration", will be passed to user space. vm-test-run-hermes-remote> client # [ 0.033702] random: crng init done vm-test-run-hermes-remote> client # [ 0.033702] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes vm-test-run-hermes-remote> client # [ 0.035202] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-hermes-remote> client # [ 0.035948] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) vm-test-run-hermes-remote> client # [ 0.035990] Fallback order for Node 0: 0 vm-test-run-hermes-remote> client # [ 0.035992] Built 1 zonelists, mobility grouping on. Total pages: 524150 vm-test-run-hermes-remote> client # [ 0.035993] Policy zone: DMA32 vm-test-run-hermes-remote> client # [ 0.037713] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-hermes-remote> client # [ 0.041186] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-hermes-remote> client # [ 0.044386] allocated 4194304 bytes of page_ext vm-test-run-hermes-remote> client # [ 0.052868] ftrace: allocating 48798 entries in 192 pages vm-test-run-hermes-remote> client # [ 0.052869] ftrace: allocated 192 pages with 2 groups vm-test-run-hermes-remote> client # [ 0.053506] Dynamic Preempt: lazy vm-test-run-hermes-remote> client # [ 0.053633] rcu: Preemptible hierarchical RCU implementation. vm-test-run-hermes-remote> client # [ 0.053633] rcu: RCU event tracing is enabled. vm-test-run-hermes-remote> client # [ 0.053634] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.053635] Trampoline variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.053635] Rude variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.053635] Tracing variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.053636] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. vm-test-run-hermes-remote> client # [ 0.053637] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-hermes-remote> client # [ 0.053649] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.053650] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.053651] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.056809] NR_IRQS: 24832, nr_irqs: 440, preallocated irqs: 16 vm-test-run-hermes-remote> client # [ 0.057050] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-hermes-remote> client # [ 0.057057] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns vm-test-run-hermes-remote> client # [ 0.057206] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-hermes-remote> client # [ 0.062316] Console: colour VGA+ 80x25 vm-test-run-hermes-remote> client # [ 0.062319] printk: legacy console [tty0] enabled vm-test-run-hermes-remote> client # [ 0.093200] printk: legacy console [ttyS0] enabled vm-test-run-hermes-remote> client # [ 0.228075] ACPI: Core revision 20250807 vm-test-run-hermes-remote> client # [ 0.229145] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns vm-test-run-hermes-remote> client # [ 0.231063] APIC: Switch to symmetric I/O mode setup vm-test-run-hermes-remote> client # [ 0.232246] x2apic enabled vm-test-run-hermes-remote> client # [ 0.233053] APIC: Switched APIC routing to: physical x2apic vm-test-run-hermes-remote> client # [ 0.234217] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() vm-test-run-hermes-remote> client # [ 0.235697] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() vm-test-run-hermes-remote> client # [ 0.237511] kvm-guest: setup PV IPIs vm-test-run-hermes-remote> client # [ 0.239113] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 vm-test-run-hermes-remote> client # [ 0.240337] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns vm-test-run-hermes-remote> client # [ 0.242397] Calibrating delay loop (skipped) preset value.. 8384.17 BogoMIPS (lpj=4192088) vm-test-run-hermes-remote> client # [ 0.243481] x86/cpu: User Mode Instruction Prevention (UMIP) activated vm-test-run-hermes-remote> client # [ 0.244502] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 vm-test-run-hermes-remote> client # [ 0.245396] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 vm-test-run-hermes-remote> server # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.53 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 21 13:06:06 UTC 2026 vm-test-run-hermes-remote> client # [ 0.247399] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto vm-test-run-hermes-remote> client # [ 0.249400] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl vm-test-run-hermes-remote> client # [ 0.251396] Spectre V2 : Mitigation: Enhanced / Automatic IBRS vm-test-run-hermes-remote> client # [ 0.252395] Speculative Return Stack Overflow: Mitigation: Safe RET vm-test-run-hermes-remote> server # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/y6g0lvfvcx3ndpwnfc9i2hkjvd254m6b-nixos-system-server-test/init regInfo=/nix/.ro-store/jn9jn0i6va55fxcygicv8p0knp4iibxn-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> server # [ 0.000000] BIOS-provided physical RAM map: vm-test-run-hermes-remote> client # [ 0.253395] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-hermes-remote> client # [ 0.254401] Spectre V2 : Enabling IBPB for BPF vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-hermes-remote> client # [ 0.255396] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-hermes-remote> client # [ 0.256396] active return thunk: srso_alias_return_thunk vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable vm-test-run-hermes-remote> client # [ 0.257416] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved vm-test-run-hermes-remote> client # [ 0.258395] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved vm-test-run-hermes-remote> client # [ 0.259395] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-hermes-remote> client # [ 0.260395] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-hermes-remote> client # [ 0.261395] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable vm-test-run-hermes-remote> client # [ 0.263395] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved vm-test-run-hermes-remote> server # [ 0.000000] NX (Execute Disable) protection: active vm-test-run-hermes-remote> client # [ 0.264395] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' vm-test-run-hermes-remote> server # [ 0.000000] APIC: Static calls initialized vm-test-run-hermes-remote> server # [ 0.000000] SMBIOS 2.8 present. vm-test-run-hermes-remote> client # [ 0.265395] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' vm-test-run-hermes-remote> server # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 vm-test-run-hermes-remote> client # [ 0.267395] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' vm-test-run-hermes-remote> server # [ 0.000000] DMI: Memory slots populated: 1/1 vm-test-run-hermes-remote> server # [ 0.000000] Hypervisor detected: KVM vm-test-run-hermes-remote> client # [ 0.268396] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 vm-test-run-hermes-remote> server # [ 0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> server # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 vm-test-run-hermes-remote> client # [ 0.269395] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 vm-test-run-hermes-remote> server # [ 0.000000] kvm-clock: using sched offset of 384860345 cycles vm-test-run-hermes-remote> client # [ 0.270395] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 vm-test-run-hermes-remote> client # [ 0.271395] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 vm-test-run-hermes-remote> server # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-hermes-remote> server # [ 0.000004] tsc: Detected 4192.088 MHz processor vm-test-run-hermes-remote> client # [ 0.273395] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 vm-test-run-hermes-remote> server # [ 0.000583] last_pfn = 0x280000 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.274395] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 vm-test-run-hermes-remote> server # [ 0.000610] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs vm-test-run-hermes-remote> client # [ 0.275395] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24 vm-test-run-hermes-remote> server # [ 0.000613] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT vm-test-run-hermes-remote> server # [ 0.000649] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.276395] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format. vm-test-run-hermes-remote> server # [ 0.002215] found SMP MP-table at [mem 0x000f5450-0x000f545f] vm-test-run-hermes-remote> server # [ 0.002227] Using GB pages for direct mapping vm-test-run-hermes-remote> server # [ 0.002282] RAMDISK: [mem 0x7e366000-0x7ffcffff] vm-test-run-hermes-remote> server # [ 0.002286] ACPI: Early table checksum verification disabled vm-test-run-hermes-remote> server # [ 0.002289] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS ) vm-test-run-hermes-remote> server # [ 0.002292] ACPI: RSDT 0x000000007FFE2539 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002295] ACPI: FACP 0x000000007FFE2319 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002300] ACPI: DSDT 0x000000007FFE0040 0022D9 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002301] ACPI: FACS 0x000000007FFE0000 000040 vm-test-run-hermes-remote> server # [ 0.002303] ACPI: APIC 0x000000007FFE240D 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002304] ACPI: HPET 0x000000007FFE249D 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002305] ACPI: MCFG 0x000000007FFE24D5 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002306] ACPI: WAET 0x000000007FFE2511 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002307] ACPI: Reserving FACP table memory at [mem 0x7ffe2319-0x7ffe240c] vm-test-run-hermes-remote> server # [ 0.002308] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2318] vm-test-run-hermes-remote> server # [ 0.002308] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] vm-test-run-hermes-remote> server # [ 0.002309] ACPI: Reserving APIC table memory at [mem 0x7ffe240d-0x7ffe249c] vm-test-run-hermes-remote> server # [ 0.002309] ACPI: Reserving HPET table memory at [mem 0x7ffe249d-0x7ffe24d4] vm-test-run-hermes-remote> server # [ 0.002309] ACPI: Reserving MCFG table memory at [mem 0x7ffe24d5-0x7ffe2510] vm-test-run-hermes-remote> server # [ 0.002310] ACPI: Reserving WAET table memory at [mem 0x7ffe2511-0x7ffe2538] vm-test-run-hermes-remote> server # [ 0.002644] No NUMA configuration found vm-test-run-hermes-remote> server # [ 0.002645] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] vm-test-run-hermes-remote> client # [ 0.302277] Freeing SMP alternatives memory: 44K vm-test-run-hermes-remote> server # [ 0.002648] NODE_DATA(0) allocated [mem 0x27fffa780-0x27ffffcff] vm-test-run-hermes-remote> server # [ 0.002719] Zone ranges: vm-test-run-hermes-remote> client # [ 0.303232] pid_max: default: 32768 minimum: 301 vm-test-run-hermes-remote> server # [ 0.002719] DMA [mem 0x0000000000001000-0x0000000000ffffff] vm-test-run-hermes-remote> client # [ 0.304180] LSM: initializing lsm=capability,landlock,yama,bpf,ima vm-test-run-hermes-remote> server # [ 0.002721] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] vm-test-run-hermes-remote> client # [ 0.305489] landlock: Up and running. vm-test-run-hermes-remote> server # [ 0.002721] Normal [mem 0x0000000100000000-0x000000027fffffff] vm-test-run-hermes-remote> client # [ 0.306396] Yama: becoming mindful. vm-test-run-hermes-remote> server # [ 0.002722] Device empty vm-test-run-hermes-remote> server # [ 0.002723] Movable zone start for each node vm-test-run-hermes-remote> client # [ 0.307409] LSM support for eBPF active vm-test-run-hermes-remote> server # [ 0.002723] Early memory node ranges vm-test-run-hermes-remote> client # [ 0.308294] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) vm-test-run-hermes-remote> server # [ 0.002723] node 0: [mem 0x0000000000001000-0x000000000009efff] vm-test-run-hermes-remote> server # [ 0.002724] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.309425] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) vm-test-run-hermes-remote> server # [ 0.002725] node 0: [mem 0x0000000100000000-0x000000027fffffff] vm-test-run-hermes-remote> server # [ 0.002726] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] vm-test-run-hermes-remote> server # [ 0.002740] On node 0, zone DMA: 1 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.312128] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2) vm-test-run-hermes-remote> server # [ 0.002924] On node 0, zone DMA: 97 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.312814] Performance Events: Fam17h+ core perfctr, AMD PMU driver. vm-test-run-hermes-remote> server # [ 0.102716] On node 0, zone Normal: 40 pages in unavailable ranges vm-test-run-hermes-remote> server # [ 0.103513] ACPI: PM-Timer IO Port: 0x608 vm-test-run-hermes-remote> client # [ 0.313399] ... version: 2 vm-test-run-hermes-remote> client # [ 0.314271] ... bit width: 48 vm-test-run-hermes-remote> server # [ 0.103526] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) vm-test-run-hermes-remote> client # [ 0.315079] ... generic counters: 6 vm-test-run-hermes-remote> server # [ 0.103549] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 vm-test-run-hermes-remote> client # [ 0.315406] ... generic bitmap: 000000000000003f vm-test-run-hermes-remote> server # [ 0.103551] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) vm-test-run-hermes-remote> client # [ 0.316397] ... fixed-purpose counters: 0 vm-test-run-hermes-remote> server # [ 0.103552] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) vm-test-run-hermes-remote> client # [ 0.317264] ... fixed-purpose bitmap: 0000000000000000 vm-test-run-hermes-remote> server # [ 0.103553] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) vm-test-run-hermes-remote> client # [ 0.318259] ... value mask: 0000ffffffffffff vm-test-run-hermes-remote> server # [ 0.103554] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) vm-test-run-hermes-remote> client # [ 0.319272] ... max period: 00007fffffffffff vm-test-run-hermes-remote> server # [ 0.103554] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) vm-test-run-hermes-remote> client # [ 0.320259] ... global_ctrl mask: 000000000000003f vm-test-run-hermes-remote> server # [ 0.103556] ACPI: Using ACPI (MADT) for SMP configuration information vm-test-run-hermes-remote> client # [ 0.321342] signal: max sigframe size: 3376 vm-test-run-hermes-remote> server # [ 0.103557] ACPI: HPET id: 0x8086a201 base: 0xfed00000 vm-test-run-hermes-remote> server # [ 0.103562] TSC deadline timer available vm-test-run-hermes-remote> client # [ 0.322127] rcu: Hierarchical SRCU implementation. vm-test-run-hermes-remote> server # [ 0.103565] CPU topo: Max. logical packages: 1 vm-test-run-hermes-remote> client # [ 0.322400] rcu: Max phase no-delay instances is 400. vm-test-run-hermes-remote> server # [ 0.103566] CPU topo: Max. logical dies: 1 vm-test-run-hermes-remote> server # [ 0.103567] CPU topo: Max. dies per package: 1 vm-test-run-hermes-remote> client # [ 0.323523] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-hermes-remote> server # [ 0.103569] CPU topo: Max. threads per core: 1 vm-test-run-hermes-remote> server # [ 0.103570] CPU topo: Num. cores per package: 4 vm-test-run-hermes-remote> server # [ 0.103570] CPU topo: Num. threads per package: 4 vm-test-run-hermes-remote> server # [ 0.103570] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs vm-test-run-hermes-remote> client # [ 0.327278] smp: Bringing up secondary CPUs ... vm-test-run-hermes-remote> server # [ 0.103589] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() vm-test-run-hermes-remote> server # [ 0.103601] kvm-guest: KVM setup pv remote TLB flush vm-test-run-hermes-remote> client # [ 0.328348] smpboot: x86: Booting SMP configuration: vm-test-run-hermes-remote> server # [ 0.103604] kvm-guest: setup PV sched yield vm-test-run-hermes-remote> client # [ 0.329153] .... node #0, CPUs: #1 vm-test-run-hermes-remote> server # [ 0.103648] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] vm-test-run-hermes-remote> client # [ 0.329434] smp: Brought up 1 node, 2 CPUs vm-test-run-hermes-remote> server # [ 0.103649] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] vm-test-run-hermes-remote> client # [ 0.331216] smpboot: Total of 2 processors activated (16768.35 BogoMIPS) vm-test-run-hermes-remote> server # [ 0.103650] PM: hibernation: Registered nosave memory: [mem 0x7ffd8000-0xffffffff] vm-test-run-hermes-remote> server # [ 0.103651] [mem 0xc0000000-0xfed1bfff] available for PCI devices vm-test-run-hermes-remote> server # [ 0.103653] Booting paravirtualized kernel on KVM vm-test-run-hermes-remote> client # [ 0.332494] Memory: 1969800K/2096600K available (17259K kernel code, 2728K rwdata, 13652K rodata, 3656K init, 2968K bss, 115932K reserved, 0K cma-reserved) vm-test-run-hermes-remote> server # [ 0.103656] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns vm-test-run-hermes-remote> client # [ 0.333624] devtmpfs: initialized vm-test-run-hermes-remote> server # [ 0.106902] setup_percpu: NR_CPUS:384 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 vm-test-run-hermes-remote> client # [ 0.334608] x86/mm: Memory block size: 128MB vm-test-run-hermes-remote> server # [ 0.108461] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u524288 vm-test-run-hermes-remote> server # [ 0.108497] kvm-guest: PV spinlocks enabled vm-test-run-hermes-remote> client # [ 0.336044] posixtimers hash table entries: 1024 (order: 2, 16384 bytes, linear) vm-test-run-hermes-remote> server # [ 0.108498] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) vm-test-run-hermes-remote> client # [ 0.337445] futex hash table entries: 512 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear). vm-test-run-hermes-remote> client # [ 0.338450] pinctrl core: initialized pinctrl subsystem vm-test-run-hermes-remote> client # [ 0.339695] PM: RTC time: 16:05:07, date: 2026-09-25 vm-test-run-hermes-remote> server # [ 0.108500] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/y6g0lvfvcx3ndpwnfc9i2hkjvd254m6b-nixos-system-server-test/init regInfo=/nix/.ro-store/jn9jn0i6va55fxcygicv8p0knp4iibxn-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> client # [ 0.342440] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-hermes-remote> server # [ 0.108568] Unknown kernel command line parameters "regInfo=/nix/.ro-store/jn9jn0i6va55fxcygicv8p0knp4iibxn-closure-info/registration", will be passed to user space. vm-test-run-hermes-remote> server # [ 0.108758] random: crng init done vm-test-run-hermes-remote> client # [ 0.343753] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations vm-test-run-hermes-remote> server # [ 0.108759] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes vm-test-run-hermes-remote> client # [ 0.344418] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-hermes-remote> server # [ 0.114846] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) vm-test-run-hermes-remote> server # [ 0.117934] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-hermes-remote> client # [ 0.345605] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-hermes-remote> server # [ 0.117985] software IO TLB: area num 4. vm-test-run-hermes-remote> server # [ 0.170050] Fallback order for Node 0: 0 vm-test-run-hermes-remote> client # [ 0.346406] audit: initializing netlink subsys (disabled) vm-test-run-hermes-remote> server # [ 0.170056] Built 1 zonelists, mobility grouping on. Total pages: 2097014 vm-test-run-hermes-remote> server # [ 0.170058] Policy zone: Normal vm-test-run-hermes-remote> client # [ 0.347450] audit: type=2000 audit(1790352308.115:1): state=initialized audit_enabled=0 res=1 vm-test-run-hermes-remote> server # [ 0.171802] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-hermes-remote> client # [ 0.347533] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-hermes-remote> server # [ 0.182496] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 vm-test-run-hermes-remote> client # [ 0.348399] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-hermes-remote> server # [ 0.195005] allocated 16777216 bytes of page_ext vm-test-run-hermes-remote> server # [ 0.203412] ftrace: allocating 48798 entries in 192 pages vm-test-run-hermes-remote> client # [ 0.349398] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-hermes-remote> server # [ 0.203414] ftrace: allocated 192 pages with 2 groups vm-test-run-hermes-remote> server # [ 0.204046] Dynamic Preempt: lazy vm-test-run-hermes-remote> client # [ 0.350398] thermal_sys: Registered thermal governor 'user_space' vm-test-run-hermes-remote> server # [ 0.204168] rcu: Preemptible hierarchical RCU implementation. vm-test-run-hermes-remote> client # [ 0.351398] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-hermes-remote> server # [ 0.204169] rcu: RCU event tracing is enabled. vm-test-run-hermes-remote> client # [ 0.352413] cpuidle: using governor menu vm-test-run-hermes-remote> server # [ 0.204169] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=4. vm-test-run-hermes-remote> server # [ 0.204171] Trampoline variant of Tasks RCU enabled. vm-test-run-hermes-remote> server # [ 0.204171] Rude variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.354968] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 vm-test-run-hermes-remote> server # [ 0.204171] Tracing variant of Tasks RCU enabled. vm-test-run-hermes-remote> server # [ 0.204172] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. vm-test-run-hermes-remote> client # [ 0.355616] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] vm-test-run-hermes-remote> server # [ 0.204172] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 vm-test-run-hermes-remote> client # [ 0.356399] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry vm-test-run-hermes-remote> server # [ 0.204191] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. vm-test-run-hermes-remote> client # [ 0.357406] PCI: Using configuration type 1 for base access vm-test-run-hermes-remote> server # [ 0.204193] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. vm-test-run-hermes-remote> client # [ 0.358554] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. vm-test-run-hermes-remote> server # [ 0.204193] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. vm-test-run-hermes-remote> server # [ 0.207345] NR_IRQS: 24832, nr_irqs: 456, preallocated irqs: 16 vm-test-run-hermes-remote> server # [ 0.207612] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-hermes-remote> server # [ 0.207618] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns vm-test-run-hermes-remote> client # [ 0.362796] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> server # [ 0.207774] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-hermes-remote> client # [ 0.363398] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-hermes-remote> server # [ 0.212949] Console: colour VGA+ 80x25 vm-test-run-hermes-remote> client # [ 0.365398] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> server # [ 0.212951] printk: legacy console [tty0] enabled vm-test-run-hermes-remote> server # [ 0.245179] printk: legacy console [ttyS0] enabled vm-test-run-hermes-remote> client # [ 0.366401] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-hermes-remote> server # [ 0.386621] ACPI: Core revision 20250807 vm-test-run-hermes-remote> server # [ 0.387681] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns vm-test-run-hermes-remote> server # [ 0.389622] APIC: Switch to symmetric I/O mode setup vm-test-run-hermes-remote> server # [ 0.390818] x2apic enabled vm-test-run-hermes-remote> server # [ 0.391651] APIC: Switched APIC routing to: physical x2apic vm-test-run-hermes-remote> server # [ 0.392825] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() vm-test-run-hermes-remote> client # [ 0.374087] ACPI: Added _OSI(Module Device) vm-test-run-hermes-remote> client # [ 0.375398] ACPI: Added _OSI(Processor Device) vm-test-run-hermes-remote> server # [ 0.394340] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() vm-test-run-hermes-remote> client # [ 0.376310] ACPI: Added _OSI(Processor Aggregator Device) vm-test-run-hermes-remote> server # [ 0.396191] kvm-guest: setup PV IPIs vm-test-run-hermes-remote> server # [ 0.397824] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 vm-test-run-hermes-remote> client # [ 0.379228] ACPI: 1 ACPI AML tables successfully acquired and loaded vm-test-run-hermes-remote> client # [ 0.381575] ACPI: Interpreter enabled vm-test-run-hermes-remote> client # [ 0.382221] ACPI: PM: (supports S0 S3 S4 S5) vm-test-run-hermes-remote> client # [ 0.383079] ACPI: Using IOAPIC for interrupt routing vm-test-run-hermes-remote> server # [ 0.399075] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns vm-test-run-hermes-remote> client # [ 0.384465] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug vm-test-run-hermes-remote> server # [ 0.404869] Calibrating delay loop (skipped) preset value.. 8384.17 BogoMIPS (lpj=4192088) vm-test-run-hermes-remote> client # [ 0.385397] PCI: Using E820 reservations for host bridge windows vm-test-run-hermes-remote> client # [ 0.387605] ACPI: Enabled 2 GPEs in block 00 to 3F vm-test-run-hermes-remote> server # [ 0.406904] x86/cpu: User Mode Instruction Prevention (UMIP) activated vm-test-run-hermes-remote> server # [ 0.407981] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 vm-test-run-hermes-remote> server # [ 0.408870] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 vm-test-run-hermes-remote> client # [ 0.391826] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) vm-test-run-hermes-remote> server # [ 0.410872] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto vm-test-run-hermes-remote> client # [ 0.393402] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] vm-test-run-hermes-remote> server # [ 0.411870] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl vm-test-run-hermes-remote> server # [ 0.412870] Spectre V2 : Mitigation: Enhanced / Automatic IBRS vm-test-run-hermes-remote> client # [ 0.395456] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] vm-test-run-hermes-remote> server # [ 0.414870] Speculative Return Stack Overflow: Mitigation: Safe RET vm-test-run-hermes-remote> client # [ 0.396493] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] vm-test-run-hermes-remote> server # [ 0.415870] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization vm-test-run-hermes-remote> client # [ 0.398831] PCI host bridge to bus 0000:00 vm-test-run-hermes-remote> server # [ 0.416875] Spectre V2 : Enabling IBPB for BPF vm-test-run-hermes-remote> client # [ 0.399401] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 0.417870] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier vm-test-run-hermes-remote> client # [ 0.400399] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 0.418870] active return thunk: srso_alias_return_thunk vm-test-run-hermes-remote> client # [ 0.402399] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> server # [ 0.419890] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' vm-test-run-hermes-remote> client # [ 0.403399] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] vm-test-run-hermes-remote> server # [ 0.421869] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' vm-test-run-hermes-remote> client # [ 0.405402] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> server # [ 0.422870] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' vm-test-run-hermes-remote> client # [ 0.406398] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] vm-test-run-hermes-remote> server # [ 0.423870] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' vm-test-run-hermes-remote> client # [ 0.408399] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-hermes-remote> server # [ 0.425870] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' vm-test-run-hermes-remote> server # [ 0.426869] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' vm-test-run-hermes-remote> client # [ 0.409547] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.427870] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' vm-test-run-hermes-remote> client # [ 0.412042] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.429870] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' vm-test-run-hermes-remote> server # [ 0.430870] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' vm-test-run-hermes-remote> server # [ 0.432870] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 vm-test-run-hermes-remote> server # [ 0.433870] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 vm-test-run-hermes-remote> client # [ 0.417456] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] vm-test-run-hermes-remote> server # [ 0.434869] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 vm-test-run-hermes-remote> client # [ 0.418419] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] vm-test-run-hermes-remote> server # [ 0.436869] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 vm-test-run-hermes-remote> client # [ 0.419439] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] vm-test-run-hermes-remote> server # [ 0.437870] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 vm-test-run-hermes-remote> server # [ 0.438870] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 vm-test-run-hermes-remote> client # [ 0.421723] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] vm-test-run-hermes-remote> server # [ 0.439869] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24 vm-test-run-hermes-remote> client # [ 0.424189] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.441869] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format. vm-test-run-hermes-remote> client # [ 0.428407] pci 0000:00:02.0: BAR 0 [io 0xc100-0xc11f] vm-test-run-hermes-remote> client # [ 0.429407] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] vm-test-run-hermes-remote> client # [ 0.430435] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] vm-test-run-hermes-remote> client # [ 0.431411] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] vm-test-run-hermes-remote> client # [ 0.434247] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.437407] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] vm-test-run-hermes-remote> client # [ 0.438407] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] vm-test-run-hermes-remote> client # [ 0.439435] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] vm-test-run-hermes-remote> client # [ 0.442259] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.445407] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] vm-test-run-hermes-remote> server # [ 0.464010] Freeing SMP alternatives memory: 44K vm-test-run-hermes-remote> client # [ 0.446407] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] vm-test-run-hermes-remote> server # [ 0.464871] pid_max: default: 32768 minimum: 301 vm-test-run-hermes-remote> client # [ 0.448440] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] vm-test-run-hermes-remote> server # [ 0.465915] LSM: initializing lsm=capability,landlock,yama,bpf,ima vm-test-run-hermes-remote> server # [ 0.466954] landlock: Up and running. vm-test-run-hermes-remote> server # [ 0.467870] Yama: becoming mindful. vm-test-run-hermes-remote> client # [ 0.450302] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.468997] LSM support for eBPF active vm-test-run-hermes-remote> server # [ 0.469968] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-hermes-remote> client # [ 0.453407] pci 0000:00:05.0: BAR 0 [io 0xc140-0xc15f] vm-test-run-hermes-remote> client # [ 0.454410] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] vm-test-run-hermes-remote> server # [ 0.470976] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-hermes-remote> client # [ 0.455438] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] vm-test-run-hermes-remote> server # [ 0.474018] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2) vm-test-run-hermes-remote> client # [ 0.457414] pci 0000:00:05.0: ROM [mem 0xfeb80000-0xfebbffff pref] vm-test-run-hermes-remote> server # [ 0.475267] Performance Events: Fam17h+ core perfctr, AMD PMU driver. vm-test-run-hermes-remote> client # [ 0.459256] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.475881] ... version: 2 vm-test-run-hermes-remote> server # [ 0.476775] ... bit width: 48 vm-test-run-hermes-remote> server # [ 0.477580] ... generic counters: 6 vm-test-run-hermes-remote> client # [ 0.462336] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] vm-test-run-hermes-remote> server # [ 0.477875] ... generic bitmap: 000000000000003f vm-test-run-hermes-remote> client # [ 0.463387] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.478878] ... fixed-purpose counters: 0 vm-test-run-hermes-remote> server # [ 0.479770] ... fixed-purpose bitmap: 0000000000000000 vm-test-run-hermes-remote> client # [ 0.465277] pci 0000:00:07.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.480772] ... value mask: 0000ffffffffffff vm-test-run-hermes-remote> server # [ 0.481779] ... max period: 00007fffffffffff vm-test-run-hermes-remote> server # [ 0.482771] ... global_ctrl mask: 000000000000003f vm-test-run-hermes-remote> client # [ 0.468424] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] vm-test-run-hermes-remote> server # [ 0.483844] signal: max sigframe size: 3376 vm-test-run-hermes-remote> client # [ 0.469438] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.484602] rcu: Hierarchical SRCU implementation. vm-test-run-hermes-remote> server # [ 0.484874] rcu: Max phase no-delay instances is 400. vm-test-run-hermes-remote> client # [ 0.472307] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.486015] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-hermes-remote> client # [ 0.474340] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] vm-test-run-hermes-remote> client # [ 0.476382] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] vm-test-run-hermes-remote> server # [ 0.489797] smp: Bringing up secondary CPUs ... vm-test-run-hermes-remote> server # [ 0.490917] smpboot: x86: Booting SMP configuration: vm-test-run-hermes-remote> client # [ 0.478417] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.481333] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] vm-test-run-hermes-remote> server # [ 0.491871] .... node #0, CPUs: #1 #2 #3 vm-test-run-hermes-remote> server # [ 0.492919] smp: Brought up 1 node, 4 CPUs vm-test-run-hermes-remote> client # [ 0.482397] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] vm-test-run-hermes-remote> server # [ 0.494873] smpboot: Total of 4 processors activated (33536.70 BogoMIPS) vm-test-run-hermes-remote> server # [ 0.496176] Memory: 8073824K/8388056K available (17259K kernel code, 2728K rwdata, 13652K rodata, 3656K init, 2968K bss, 290556K reserved, 0K cma-reserved) vm-test-run-hermes-remote> server # [ 0.497071] devtmpfs: initialized vm-test-run-hermes-remote> server # [ 0.498010] x86/mm: Memory block size: 128MB vm-test-run-hermes-remote> server # [ 0.500276] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-hermes-remote> client # [ 0.484321] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.501936] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear). vm-test-run-hermes-remote> server # [ 0.502938] pinctrl core: initialized pinctrl subsystem vm-test-run-hermes-remote> client # [ 0.495415] pci 0000:00:0a.0: BAR 0 [io 0xc080-0xc0bf] vm-test-run-hermes-remote> server # [ 0.504100] PM: RTC time: 16:05:07, date: 2026-09-25 vm-test-run-hermes-remote> client # [ 0.496407] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] vm-test-run-hermes-remote> client # [ 0.497435] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.506859] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-hermes-remote> client # [ 0.500247] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.508766] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations vm-test-run-hermes-remote> client # [ 0.503407] pci 0000:00:0b.0: BAR 0 [io 0xc160-0xc17f] vm-test-run-hermes-remote> server # [ 0.509912] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-hermes-remote> client # [ 0.504407] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] vm-test-run-hermes-remote> client # [ 0.505435] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.511701] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-hermes-remote> server # [ 0.512882] audit: initializing netlink subsys (disabled) vm-test-run-hermes-remote> client # [ 0.507282] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.514141] audit: type=2000 audit(1790352308.277:1): state=initialized audit_enabled=0 res=1 vm-test-run-hermes-remote> client # [ 0.510101] pci 0000:00:1d.0: BAR 4 [io 0xc180-0xc19f] vm-test-run-hermes-remote> server # [ 0.514141] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-hermes-remote> server # [ 0.514876] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-hermes-remote> client # [ 0.511667] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.515876] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-hermes-remote> client # [ 0.514082] pci 0000:00:1d.1: BAR 4 [io 0xc1a0-0xc1bf] vm-test-run-hermes-remote> server # [ 0.516876] thermal_sys: Registered thermal governor 'user_space' vm-test-run-hermes-remote> server # [ 0.517876] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-hermes-remote> client # [ 0.514641] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.518894] cpuidle: using governor menu vm-test-run-hermes-remote> client # [ 0.517102] pci 0000:00:1d.2: BAR 4 [io 0xc1c0-0xc1df] vm-test-run-hermes-remote> server # [ 0.521424] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 vm-test-run-hermes-remote> client # [ 0.518679] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.522110] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] vm-test-run-hermes-remote> client # [ 0.521071] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] vm-test-run-hermes-remote> server # [ 0.522873] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry vm-test-run-hermes-remote> server # [ 0.523880] PCI: Using configuration type 1 for base access vm-test-run-hermes-remote> client # [ 0.522757] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.524968] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. vm-test-run-hermes-remote> client # [ 0.524862] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO vm-test-run-hermes-remote> server # [ 0.526147] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> client # [ 0.526730] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.526877] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-hermes-remote> server # [ 0.527875] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> client # [ 0.529397] pci 0000:00:1f.2: BAR 4 [io 0xc1e0-0xc1ff] vm-test-run-hermes-remote> server # [ 0.528876] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-hermes-remote> client # [ 0.530408] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] vm-test-run-hermes-remote> server # [ 0.531026] ACPI: Added _OSI(Module Device) vm-test-run-hermes-remote> client # [ 0.532881] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.531872] ACPI: Added _OSI(Processor Device) vm-test-run-hermes-remote> server # [ 0.532819] ACPI: Added _OSI(Processor Aggregator Device) vm-test-run-hermes-remote> client # [ 0.535104] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] vm-test-run-hermes-remote> server # [ 0.535684] ACPI: 1 ACPI AML tables successfully acquired and loaded vm-test-run-hermes-remote> client # [ 0.541067] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 vm-test-run-hermes-remote> server # [ 0.540075] ACPI: Interpreter enabled vm-test-run-hermes-remote> client # [ 0.542513] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 vm-test-run-hermes-remote> server # [ 0.540885] ACPI: PM: (supports S0 S3 S4 S5) vm-test-run-hermes-remote> client # [ 0.543512] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 vm-test-run-hermes-remote> server # [ 0.541794] ACPI: Using IOAPIC for interrupt routing vm-test-run-hermes-remote> client # [ 0.544512] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 vm-test-run-hermes-remote> server # [ 0.542770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug vm-test-run-hermes-remote> client # [ 0.546508] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 vm-test-run-hermes-remote> server # [ 0.543876] PCI: Using E820 reservations for host bridge windows vm-test-run-hermes-remote> client # [ 0.547508] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 vm-test-run-hermes-remote> server # [ 0.544994] ACPI: Enabled 2 GPEs in block 00 to 3F vm-test-run-hermes-remote> client # [ 0.548511] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.549511] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.551443] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 vm-test-run-hermes-remote> server # [ 0.549333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) vm-test-run-hermes-remote> client # [ 0.552413] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 vm-test-run-hermes-remote> client # [ 0.553412] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 vm-test-run-hermes-remote> server # [ 0.549880] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] vm-test-run-hermes-remote> client # [ 0.554412] ACPI: PCI: Interrupt link GSID configured for IRQ 19 vm-test-run-hermes-remote> server # [ 0.550931] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] vm-test-run-hermes-remote> client # [ 0.556409] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 vm-test-run-hermes-remote> server # [ 0.551972] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] vm-test-run-hermes-remote> client # [ 0.557409] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 vm-test-run-hermes-remote> server # [ 0.553280] PCI host bridge to bus 0000:00 vm-test-run-hermes-remote> client # [ 0.558409] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 vm-test-run-hermes-remote> client # [ 0.559409] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 vm-test-run-hermes-remote> server # [ 0.553879] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 0.554874] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] vm-test-run-hermes-remote> client # [ 0.562411] iommu: Default domain type: Translated vm-test-run-hermes-remote> server # [ 0.555872] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> client # [ 0.563170] iommu: DMA domain TLB invalidation policy: lazy mode vm-test-run-hermes-remote> client # [ 0.564617] ACPI: bus type USB registered vm-test-run-hermes-remote> server # [ 0.556872] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] vm-test-run-hermes-remote> client # [ 0.565459] usbcore: registered new interface driver usbfs vm-test-run-hermes-remote> server # [ 0.557874] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> client # [ 0.566412] usbcore: registered new interface driver hub vm-test-run-hermes-remote> server # [ 0.558875] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window] vm-test-run-hermes-remote> client # [ 0.567415] usbcore: registered new device driver usb vm-test-run-hermes-remote> server # [ 0.559876] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-hermes-remote> client # [ 0.570000] NetLabel: Initializing vm-test-run-hermes-remote> client # [ 0.570398] NetLabel: domain hash size = 128 vm-test-run-hermes-remote> server # [ 0.560941] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.571307] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO vm-test-run-hermes-remote> client # [ 0.572340] NetLabel: unlabeled traffic allowed by default vm-test-run-hermes-remote> server # [ 0.562521] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.573313] PCI: Using ACPI for IRQ routing vm-test-run-hermes-remote> server # [ 0.564809] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] vm-test-run-hermes-remote> server # [ 0.565895] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] vm-test-run-hermes-remote> server # [ 0.566914] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] vm-test-run-hermes-remote> server # [ 0.568024] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] vm-test-run-hermes-remote> server # [ 0.569592] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.571881] pci 0000:00:02.0: BAR 0 [io 0xc100-0xc11f] vm-test-run-hermes-remote> server # [ 0.572887] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] vm-test-run-hermes-remote> server # [ 0.573910] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.574887] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] vm-test-run-hermes-remote> server # [ 0.576936] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.578915] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] vm-test-run-hermes-remote> server # [ 0.579887] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] vm-test-run-hermes-remote> server # [ 0.580914] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.582854] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.585636] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] vm-test-run-hermes-remote> server # [ 0.585890] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] vm-test-run-hermes-remote> server # [ 0.586915] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref] vm-test-run-hermes-remote> server # [ 0.588743] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.590881] pci 0000:00:05.0: BAR 0 [io 0xc140-0xc15f] vm-test-run-hermes-remote> server # [ 0.591883] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] vm-test-run-hermes-remote> server # [ 0.592911] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref] vm-test-run-hermes-remote> server # [ 0.593886] pci 0000:00:05.0: ROM [mem 0xfeb80000-0xfebbffff pref] vm-test-run-hermes-remote> server # [ 0.595717] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.597868] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] vm-test-run-hermes-remote> server # [ 0.598914] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.601110] pci 0000:00:07.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.602799] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] vm-test-run-hermes-remote> server # [ 0.603865] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.605739] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.607785] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] vm-test-run-hermes-remote> server # [ 0.608855] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref] vm-test-run-hermes-remote> server # [ 0.610959] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.650524] pci 0000:00:01.0: vgaarb: setting as boot VGA device vm-test-run-hermes-remote> server # [ 0.612817] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] vm-test-run-hermes-remote> client # [ 0.651393] pci 0000:00:01.0: vgaarb: bridge control possible vm-test-run-hermes-remote> server # [ 0.613856] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref] vm-test-run-hermes-remote> client # [ 0.651393] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vm-test-run-hermes-remote> client # [ 0.654400] vgaarb: loaded vm-test-run-hermes-remote> server # [ 0.615734] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.655172] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 vm-test-run-hermes-remote> client # [ 0.656397] hpet0: 3 comparators, 64-bit 100.000000 MHz counter vm-test-run-hermes-remote> server # [ 0.617890] pci 0000:00:0a.0: BAR 0 [io 0xc080-0xc0bf] vm-test-run-hermes-remote> server # [ 0.618882] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] vm-test-run-hermes-remote> server # [ 0.619910] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref] vm-test-run-hermes-remote> client # [ 0.661461] clocksource: Switched to clocksource kvm-clock vm-test-run-hermes-remote> server # [ 0.621751] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.663119] VFS: Disk quotas dquot_6.6.0 vm-test-run-hermes-remote> client # [ 0.663974] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-hermes-remote> server # [ 0.623881] pci 0000:00:0b.0: BAR 0 [io 0xc160-0xc17f] vm-test-run-hermes-remote> client # [ 0.665496] pnp: PnP ACPI init vm-test-run-hermes-remote> server # [ 0.624881] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] vm-test-run-hermes-remote> client # [ 0.666330] ACPI: IRQ 4 override to edge(!), high(!) vm-test-run-hermes-remote> client # [ 0.667460] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved vm-test-run-hermes-remote> server # [ 0.625909] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref] vm-test-run-hermes-remote> client # [ 0.669244] pnp: PnP ACPI: found 5 devices vm-test-run-hermes-remote> server # [ 0.627760] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.629584] pci 0000:00:1d.0: BAR 4 [io 0xc180-0xc19f] vm-test-run-hermes-remote> server # [ 0.630126] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.631537] pci 0000:00:1d.1: BAR 4 [io 0xc1a0-0xc1bf] vm-test-run-hermes-remote> client # [ 0.676741] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns vm-test-run-hermes-remote> server # [ 0.632122] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.678495] clocksource: Switched to clocksource acpi_pm vm-test-run-hermes-remote> client # [ 0.679660] NET: Registered PF_INET protocol family vm-test-run-hermes-remote> server # [ 0.633584] pci 0000:00:1d.2: BAR 4 [io 0xc1c0-0xc1df] vm-test-run-hermes-remote> client # [ 0.680943] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.634194] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.635496] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] vm-test-run-hermes-remote> server # [ 0.636158] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.637342] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO vm-test-run-hermes-remote> server # [ 0.638217] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.639890] pci 0000:00:1f.2: BAR 4 [io 0xc1e0-0xc1ff] vm-test-run-hermes-remote> server # [ 0.640881] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] vm-test-run-hermes-remote> client # [ 0.693580] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) vm-test-run-hermes-remote> server # [ 0.642325] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.695375] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.643608] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] vm-test-run-hermes-remote> client # [ 0.696967] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-hermes-remote> client # [ 0.698580] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) vm-test-run-hermes-remote> client # [ 0.700081] TCP: Hash tables configured (established 16384 bind 16384) vm-test-run-hermes-remote> client # [ 0.701460] MPTCP token hash table entries: 2048 (order: 4, 49152 bytes, linear) vm-test-run-hermes-remote> server # [ 0.648648] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.702980] UDP hash table entries: 1024 (order: 4, 65536 bytes, linear) vm-test-run-hermes-remote> server # [ 0.649970] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.704376] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes, linear) vm-test-run-hermes-remote> server # [ 0.650988] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.705838] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-hermes-remote> server # [ 0.651989] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.707017] NET: Registered PF_XDP protocol family vm-test-run-hermes-remote> client # [ 0.708035] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 0.652988] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.709288] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 0.653983] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.710560] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> server # [ 0.654982] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.711938] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] vm-test-run-hermes-remote> server # [ 0.655985] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 vm-test-run-hermes-remote> server # [ 0.656914] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 vm-test-run-hermes-remote> client # [ 0.713320] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> server # [ 0.657887] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 vm-test-run-hermes-remote> client # [ 0.714731] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] vm-test-run-hermes-remote> server # [ 0.658887] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 vm-test-run-hermes-remote> client # [ 0.716689] ACPI: \_SB_.GSIA: Enabled at IRQ 16 vm-test-run-hermes-remote> server # [ 0.659887] ACPI: PCI: Interrupt link GSID configured for IRQ 19 vm-test-run-hermes-remote> server # [ 0.660884] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 vm-test-run-hermes-remote> client # [ 0.718674] ACPI: \_SB_.GSIB: Enabled at IRQ 17 vm-test-run-hermes-remote> server # [ 0.661887] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 vm-test-run-hermes-remote> client # [ 0.720579] ACPI: \_SB_.GSIC: Enabled at IRQ 18 vm-test-run-hermes-remote> server # [ 0.662887] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 vm-test-run-hermes-remote> server # [ 0.663884] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 vm-test-run-hermes-remote> client # [ 0.722481] ACPI: \_SB_.GSID: Enabled at IRQ 19 vm-test-run-hermes-remote> client # [ 0.724166] PCI: CLS 0 bytes, default 64 vm-test-run-hermes-remote> server # [ 0.665885] iommu: Default domain type: Translated vm-test-run-hermes-remote> server # [ 0.666871] iommu: DMA domain TLB invalidation policy: lazy mode vm-test-run-hermes-remote> client # [ 0.725184] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns vm-test-run-hermes-remote> server # [ 0.668006] ACPI: bus type USB registered vm-test-run-hermes-remote> client # [ 0.725226] Trying to unpack rootfs image as initramfs... vm-test-run-hermes-remote> server # [ 0.668921] usbcore: registered new interface driver usbfs vm-test-run-hermes-remote> server # [ 0.669884] usbcore: registered new interface driver hub vm-test-run-hermes-remote> server # [ 0.670881] usbcore: registered new device driver usb vm-test-run-hermes-remote> server # [ 0.672400] NetLabel: Initializing vm-test-run-hermes-remote> server # [ 0.672871] NetLabel: domain hash size = 128 vm-test-run-hermes-remote> server # [ 0.673777] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO vm-test-run-hermes-remote> server # [ 0.674843] NetLabel: unlabeled traffic allowed by default vm-test-run-hermes-remote> server # [ 0.675786] PCI: Using ACPI for IRQ routing vm-test-run-hermes-remote> client # [ 0.739053] Initialise system trusted keyrings vm-test-run-hermes-remote> client # [ 0.740411] workingset: timestamp_bits=40 max_order=19 bucket_order=0 vm-test-run-hermes-remote> client # [ 0.749157] Key type asymmetric registered vm-test-run-hermes-remote> client # [ 0.750039] Asymmetric key parser 'x509' registered vm-test-run-hermes-remote> client # [ 0.751086] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) vm-test-run-hermes-remote> client # [ 0.753418] io scheduler mq-deadline registered vm-test-run-hermes-remote> client # [ 0.754391] io scheduler kyber registered vm-test-run-hermes-remote> client # [ 0.758590] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-hermes-remote> client # [ 0.760130] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A vm-test-run-hermes-remote> client # [ 0.762510] Linux agpgart interface v0.103 vm-test-run-hermes-remote> client # [ 0.763448] ACPI: bus type drm_connector registered vm-test-run-hermes-remote> client # [ 0.765608] usbcore: registered new interface driver usbserial_generic vm-test-run-hermes-remote> client # [ 0.766919] usbserial: USB Serial support registered for generic vm-test-run-hermes-remote> client # [ 0.768139] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. vm-test-run-hermes-remote> client # [ 0.768139] Please enable it if your BIOS has the CPPC option. vm-test-run-hermes-remote> client # [ 0.770833] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled vm-test-run-hermes-remote> client # [ 0.772461] drop_monitor: Initializing network drop monitor service vm-test-run-hermes-remote> client # [ 0.773843] NET: Registered PF_INET6 protocol family vm-test-run-hermes-remote> client # [ 0.775509] Segment Routing with IPv6 vm-test-run-hermes-remote> client # [ 0.776309] In-situ OAM (IOAM) with IPv6 vm-test-run-hermes-remote> client # [ 0.779609] IPI shorthand broadcast: enabled vm-test-run-hermes-remote> client # [ 0.782930] sched_clock: Marking stable (605015845, 177337296)->(808245698, -25892557) vm-test-run-hermes-remote> client # [ 0.785538] registered taskstats version 1 vm-test-run-hermes-remote> client # [ 0.786627] Loading compiled-in X.509 certificates vm-test-run-hermes-remote> client # [ 0.793286] Demotion targets for Node 0: null vm-test-run-hermes-remote> client # [ 0.794363] Key type .fscrypt registered vm-test-run-hermes-remote> client # [ 0.795202] Key type fscrypt-provisioning registered vm-test-run-hermes-remote> client # [ 0.796371] ima: No TPM chip found, activating TPM-bypass! vm-test-run-hermes-remote> client # [ 0.797504] ima: Allocated hash algorithm: sha1 vm-test-run-hermes-remote> client # [ 0.798490] ima: No architecture policies found vm-test-run-hermes-remote> client # [ 0.800380] PM: Magic number: 10:109:86 vm-test-run-hermes-remote> client # [ 0.801874] RAS: Correctable Errors collector initialized. vm-test-run-hermes-remote> client # [ 0.805637] clk: Disabling unused clocks vm-test-run-hermes-remote> client # [ 0.806504] PM: genpd: Disabling unused power domains vm-test-run-hermes-remote> server # [ 0.751901] pci 0000:00:01.0: vgaarb: setting as boot VGA device vm-test-run-hermes-remote> server # [ 0.752868] pci 0000:00:01.0: vgaarb: bridge control possible vm-test-run-hermes-remote> server # [ 0.752868] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vm-test-run-hermes-remote> server # [ 0.752874] vgaarb: loaded vm-test-run-hermes-remote> server # [ 0.753662] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 vm-test-run-hermes-remote> server # [ 0.754651] hpet0: 3 comparators, 64-bit 100.000000 MHz counter vm-test-run-hermes-remote> server # [ 0.757962] clocksource: Switched to clocksource kvm-clock vm-test-run-hermes-remote> server # [ 0.759612] VFS: Disk quotas dquot_6.6.0 vm-test-run-hermes-remote> server # [ 0.760474] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-hermes-remote> server # [ 0.762080] pnp: PnP ACPI init vm-test-run-hermes-remote> server # [ 0.762982] ACPI: IRQ 4 override to edge(!), high(!) vm-test-run-hermes-remote> server # [ 0.764095] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved vm-test-run-hermes-remote> server # [ 0.765885] pnp: PnP ACPI: found 5 devices vm-test-run-hermes-remote> server # [ 0.773420] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns vm-test-run-hermes-remote> server # [ 0.775202] clocksource: Switched to clocksource acpi_pm vm-test-run-hermes-remote> server # [ 0.776532] NET: Registered PF_INET protocol family vm-test-run-hermes-remote> server # [ 0.778550] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) vm-test-run-hermes-remote> server # [ 0.792246] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) vm-test-run-hermes-remote> server # [ 0.794072] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.795683] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-hermes-remote> server # [ 0.798853] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) vm-test-run-hermes-remote> server # [ 0.800412] TCP: Hash tables configured (established 65536 bind 65536) vm-test-run-hermes-remote> server # [ 0.801784] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear) vm-test-run-hermes-remote> server # [ 0.803522] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.805082] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.806657] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-hermes-remote> server # [ 0.807840] NET: Registered PF_XDP protocol family vm-test-run-hermes-remote> server # [ 0.808874] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 0.810116] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 0.811392] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> server # [ 0.812749] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] vm-test-run-hermes-remote> server # [ 0.814115] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> server # [ 0.815515] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window] vm-test-run-hermes-remote> server # [ 0.817646] ACPI: \_SB_.GSIA: Enabled at IRQ 16 vm-test-run-hermes-remote> server # [ 0.819747] ACPI: \_SB_.GSIB: Enabled at IRQ 17 vm-test-run-hermes-remote> server # [ 0.821847] ACPI: \_SB_.GSIC: Enabled at IRQ 18 vm-test-run-hermes-remote> server # [ 0.823810] ACPI: \_SB_.GSID: Enabled at IRQ 19 vm-test-run-hermes-remote> server # [ 0.825584] PCI: CLS 0 bytes, default 64 vm-test-run-hermes-remote> server # [ 0.826533] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) vm-test-run-hermes-remote> server # [ 0.826740] Trying to unpack rootfs image as initramfs... vm-test-run-hermes-remote> server # [ 0.826825] software IO TLB: mapped [mem 0x000000007a366000-0x000000007e366000] (64MB) vm-test-run-hermes-remote> server # [ 0.831401] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns vm-test-run-hermes-remote> server # [ 0.849610] Initialise system trusted keyrings vm-test-run-hermes-remote> server # [ 0.850940] workingset: timestamp_bits=40 max_order=21 bucket_order=0 vm-test-run-hermes-remote> client # [ 0.916549] Freeing initrd memory: 29100K vm-test-run-hermes-remote> client # [ 0.919494] Freeing unused decrypted memory: 2028K vm-test-run-hermes-remote> client # [ 0.921997] Freeing unused kernel image (initmem) memory: 3656K vm-test-run-hermes-remote> client # [ 0.923281] Write protecting the kernel read-only data: 32768k vm-test-run-hermes-remote> server # [ 0.859956] Key type asymmetric registered vm-test-run-hermes-remote> client # [ 0.925297] Freeing unused kernel image (text/rodata gap) memory: 1172K vm-test-run-hermes-remote> server # [ 0.860922] Asymmetric key parser 'x509' registered vm-test-run-hermes-remote> client # [ 0.927017] Freeing unused kernel image (rodata/data gap) memory: 684K vm-test-run-hermes-remote> server # [ 0.862084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) vm-test-run-hermes-remote> server # [ 0.863980] io scheduler mq-deadline registered vm-test-run-hermes-remote> server # [ 0.865015] io scheduler kyber registered vm-test-run-hermes-remote> server # [ 0.868000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-hermes-remote> server # [ 0.869641] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A vm-test-run-hermes-remote> server # [ 0.872385] Linux agpgart interface v0.103 vm-test-run-hermes-remote> server # [ 0.873388] ACPI: bus type drm_connector registered vm-test-run-hermes-remote> server # [ 0.876049] usbcore: registered new interface driver usbserial_generic vm-test-run-hermes-remote> server # [ 0.877507] usbserial: USB Serial support registered for generic vm-test-run-hermes-remote> server # [ 0.878812] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. vm-test-run-hermes-remote> server # [ 0.878812] Please enable it if your BIOS has the CPPC option. vm-test-run-hermes-remote> server # [ 0.881674] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled vm-test-run-hermes-remote> server # [ 0.883393] drop_monitor: Initializing network drop monitor service vm-test-run-hermes-remote> server # [ 0.884849] NET: Registered PF_INET6 protocol family vm-test-run-hermes-remote> server # [ 0.886618] Segment Routing with IPv6 vm-test-run-hermes-remote> server # [ 0.887502] In-situ OAM (IOAM) with IPv6 vm-test-run-hermes-remote> server # [ 0.889746] IPI shorthand broadcast: enabled vm-test-run-hermes-remote> server # [ 0.893536] sched_clock: Marking stable (706015836, 187250265)->(978096184, -84830083) vm-test-run-hermes-remote> client # [ 0.959571] x86/mm: Checked W+X mappings: passed, no W+X pages found. vm-test-run-hermes-remote> server # [ 0.895497] registered taskstats version 1 vm-test-run-hermes-remote> client # [ 0.960898] Run /init as init process vm-test-run-hermes-remote> server # [ 0.896664] Loading compiled-in X.509 certificates vm-test-run-hermes-remote> server # [ 0.904956] Demotion targets for Node 0: null vm-test-run-hermes-remote> client # [ 0.970008] systemd[1]: Inserted module 'autofs4' vm-test-run-hermes-remote> server # [ 0.906143] Key type .fscrypt registered vm-test-run-hermes-remote> server # [ 0.907016] Key type fscrypt-provisioning registered vm-test-run-hermes-remote> server # [ 0.908191] ima: No TPM chip found, activating TPM-bypass! vm-test-run-hermes-remote> server # [ 0.909355] ima: Allocated hash algorithm: sha1 vm-test-run-hermes-remote> server # [ 0.910381] ima: No architecture policies found vm-test-run-hermes-remote> server # [ 0.911568] PM: Magic number: 10:109:86 vm-test-run-hermes-remote> server # [ 0.913110] RAS: Correctable Errors collector initialized. vm-test-run-hermes-remote> server # [ 0.916971] clk: Disabling unused clocks vm-test-run-hermes-remote> server # [ 0.917903] PM: genpd: Disabling unused power domains vm-test-run-hermes-remote> client # [ 0.988378] fuse: init (API version 7.45) vm-test-run-hermes-remote> client # [ 0.994959] ACPI: \_SB_.GSIG: Enabled at IRQ 22 vm-test-run-hermes-remote> client # [ 0.997559] ACPI: \_SB_.GSIH: Enabled at IRQ 23 vm-test-run-hermes-remote> client # [ 1.000802] ACPI: \_SB_.GSIE: Enabled at IRQ 20 vm-test-run-hermes-remote> client # [ 1.003076] ACPI: \_SB_.GSIF: Enabled at IRQ 21 vm-test-run-hermes-remote> client # [ 1.008575] virtiofs virtio5: discovered new tag: nix-store vm-test-run-hermes-remote> client # [ 1.010663] virtiofs virtio5: virtio_fs_setup_dax: No cache capability vm-test-run-hermes-remote> client # [ 1.017730] virtiofs virtio6: discovered new tag: shared vm-test-run-hermes-remote> client # [ 1.019703] virtiofs virtio6: virtio_fs_setup_dax: No cache capability vm-test-run-hermes-remote> client # [ 1.023186] virtiofs virtio7: discovered new tag: xchg vm-test-run-hermes-remote> client # [ 1.025147] virtiofs virtio7: virtio_fs_setup_dax: No cache capability vm-test-run-hermes-remote> client # [ 1.049944] systemd[1]: Successfully made /usr/ read-only. vm-test-run-hermes-remote> server # [ 1.012114] Freeing initrd memory: 29096K vm-test-run-hermes-remote> server # [ 1.015156] Freeing unused decrypted memory: 2028K vm-test-run-hermes-remote> server # [ 1.017658] Freeing unused kernel image (initmem) memory: 3656K vm-test-run-hermes-remote> server # [ 1.018945] Write protecting the kernel read-only data: 32768k vm-test-run-hermes-remote> server # [ 1.020935] Freeing unused kernel image (text/rodata gap) memory: 1172K vm-test-run-hermes-remote> server # [ 1.022626] Freeing unused kernel image (rodata/data gap) memory: 684K vm-test-run-hermes-remote> server # [ 1.054856] x86/mm: Checked W+X mappings: passed, no W+X pages found. vm-test-run-hermes-remote> server # [ 1.056186] Run /init as init process vm-test-run-hermes-remote> server # [ 1.066063] systemd[1]: Inserted module 'autofs4' vm-test-run-hermes-remote> server # [ 1.084727] fuse: init (API version 7.45) vm-test-run-hermes-remote> server # [ 1.091210] ACPI: \_SB_.GSIG: Enabled at IRQ 22 vm-test-run-hermes-remote> server # [ 1.093871] ACPI: \_SB_.GSIH: Enabled at IRQ 23 vm-test-run-hermes-remote> server # [ 1.105472] ACPI: \_SB_.GSIE: Enabled at IRQ 20 vm-test-run-hermes-remote> server # [ 1.107981] ACPI: \_SB_.GSIF: Enabled at IRQ 21 vm-test-run-hermes-remote> server # [ 1.113650] virtiofs virtio5: discovered new tag: nix-store vm-test-run-hermes-remote> server # [ 1.115871] virtiofs virtio5: virtio_fs_setup_dax: No cache capability vm-test-run-hermes-remote> server # [ 1.122601] virtiofs virtio6: discovered new tag: shared vm-test-run-hermes-remote> server # [ 1.124611] virtiofs virtio6: virtio_fs_setup_dax: No cache capability vm-test-run-hermes-remote> server # [ 1.128129] virtiofs virtio7: discovered new tag: xchg vm-test-run-hermes-remote> server # [ 1.130076] virtiofs virtio7: virtio_fs_setup_dax: No cache capability vm-test-run-hermes-remote> server # [ 1.154203] systemd[1]: Successfully made /usr/ read-only. vm-test-run-hermes-remote> client # [ 1.386415] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> client # [ 1.392253] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> client # [ 1.393311] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> client # [ 1.394401] systemd[1]: Running in initrd. vm-test-run-hermes-remote> client # [ 1.395579] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> client # [ 1.397003] systemd[1]: Hostname set to . vm-test-run-hermes-remote> client # [ 1.481282] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> client # [ 1.504183] systemd[1]: Queued start job for default target Initrd Default Target. vm-test-run-hermes-remote> client # [ 1.522773] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-hermes-remote> client # [ 1.524154] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 1.525810] systemd[1]: Expecting device /dev/disk/by-label/nixos... vm-test-run-hermes-remote> client # [ 1.527145] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> client # [ 1.528213] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> client # [ 1.529295] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> client # [ 1.530286] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> client # [ 1.531479] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 1.532906] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-hermes-remote> client # [ 1.534272] systemd[1]: Listening on Journal Sockets. vm-test-run-hermes-remote> client # [ 1.535493] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> client # [ 1.536719] systemd[1]: Listening on udev Kernel Socket. vm-test-run-hermes-remote> client # [ 1.537876] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> client # [ 1.539603] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> client # [ 1.541604] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> client # [ 1.547657] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> client # [ 1.551391] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> client # [ 1.553093] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 1.556628] systemd-journald[73]: Collecting audit messages is disabled. vm-test-run-hermes-remote> server # [ 1.490218] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> server # [ 1.497120] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> server # [ 1.498452] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> server # [ 1.499750] systemd[1]: Running in initrd. vm-test-run-hermes-remote> server # [ 1.501349] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> client # [ 1.567513] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 1.503033] systemd[1]: Hostname set to . vm-test-run-hermes-remote> client # [ 1.574459] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 1.577852] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 1.582791] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> client # [ 1.585887] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config vm-test-run-hermes-remote> client # [ 1.592397] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> client # [ 1.594443] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. vm-test-run-hermes-remote> client # [ 1.596983] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev vm-test-run-hermes-remote> client # [ 1.599755] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> client # [ 1.612220] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> client # [ 1.615448] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> client # [ 1.622414] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> client # [ 1.627399] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> client # [ 1.629618] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> client # [ 1.451850] systemd-modules-load[75]: Using 2 probe threads vm-test-run-hermes-remote> client # [ 1.454537] systemd-modules-load[75]: Inserted module 'virtio_balloon' vm-test-run-hermes-remote> client # [ 1.456340] systemd-modules-load[75]: Inserted module 'virtio_gpu' vm-test-run-hermes-remote> client # [ 1.458346] systemd-modules-load[75]: Inserted module 'dm_mod' vm-test-run-hermes-remote> client # [ 1.462723] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 1.464626] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> client # [ 1.465787] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> client # [ 1.467362] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 1.469180] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 1.593192] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> client # [ 1.483747] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> client # [ 1.489047] systemd-udevd[91]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> client # [ 1.502330] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 1.617338] systemd[1]: Queued start job for default target Initrd Default Target. vm-test-run-hermes-remote> client # [ 1.509624] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 1.510633] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> client # [ 1.511631] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 1.629561] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-hermes-remote> server # [ 1.630953] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 1.632634] systemd[1]: Expecting device /dev/disk/by-label/nixos... vm-test-run-hermes-remote> server # [ 1.633977] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> server # [ 1.635053] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> server # [ 1.636142] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> server # [ 1.637147] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> server # [ 1.638348] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 1.639788] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-hermes-remote> server # [ 1.641159] systemd[1]: Listening on Journal Sockets. vm-test-run-hermes-remote> server # [ 1.642393] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 1.643623] systemd[1]: Listening on udev Kernel Socket. vm-test-run-hermes-remote> server # [ 1.644787] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> server # [ 1.646578] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 1.648611] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 1.651685] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 1.653782] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> server # [ 1.655141] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 1.657977] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 1.663452] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 1.665737] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 1.667865] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 1.670160] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config vm-test-run-hermes-remote> server # [ 1.671660] systemd-journald[90]: Collecting audit messages is disabled. vm-test-run-hermes-remote> server # [ 1.673105] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 1.676299] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. vm-test-run-hermes-remote> server # [ 1.678835] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev vm-test-run-hermes-remote> server # [ 1.682720] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 1.684730] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 1.689397] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 1.693005] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 1.696609] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 1.706678] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 1.708262] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 1.709782] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> server # [ 1.711713] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 1.724468] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> server # [ 1.537333] systemd-modules-load[91]: Using 4 probe threads vm-test-run-hermes-remote> server # [ 1.539712] systemd-modules-load[91]: Inserted module 'virtio_balloon' vm-test-run-hermes-remote> server # [ 1.540934] systemd-modules-load[91]: Inserted module 'dm_mod' vm-test-run-hermes-remote> server # [ 1.542115] systemd-modules-load[91]: Inserted module 'virtio_gpu' vm-test-run-hermes-remote> server # [ 1.543319] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> server # [ 1.546733] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 1.548722] systemd-udevd[101]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> server # [ 1.557686] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 1.562607] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 1.815078] ehci-pci 0000:00:1d.7: EHCI Host Controller vm-test-run-hermes-remote> server # [ 1.563507] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> client # [ 1.815961] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 vm-test-run-hermes-remote> server # [ 1.564444] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> client # [ 1.817495] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 vm-test-run-hermes-remote> client # [ 1.822276] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 vm-test-run-hermes-remote> client # [ 1.824357] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 vm-test-run-hermes-remote> client # [ 1.825844] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 vm-test-run-hermes-remote> client # [ 1.827176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 1.830123] usb usb1: Product: EHCI Host Controller vm-test-run-hermes-remote> client # [ 1.830982] usb usb1: Manufacturer: Linux 6.18.53 ehci_hcd vm-test-run-hermes-remote> client # [ 1.832671] usb usb1: SerialNumber: 0000:00:1d.7 vm-test-run-hermes-remote> client # [ 1.834164] hub 1-0:1.0: USB hub found vm-test-run-hermes-remote> client # [ 1.835229] hub 1-0:1.0: 6 ports detected vm-test-run-hermes-remote> client # [ 1.836239] virtio_blk virtio2: 2/0/0 default/read/poll queues vm-test-run-hermes-remote> client # [ 1.836941] uhci_hcd 0000:00:1d.0: UHCI Host Controller vm-test-run-hermes-remote> client # [ 1.838062] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 vm-test-run-hermes-remote> client # [ 1.839259] uhci_hcd 0000:00:1d.0: detected 2 ports vm-test-run-hermes-remote> client # [ 1.840489] serio: i8042 KBD port at 0x60,0x64 irq 1 vm-test-run-hermes-remote> client # [ 1.841396] serio: i8042 AUX port at 0x60,0x64 irq 12 vm-test-run-hermes-remote> client # [ 1.845270] virtio_blk virtio2: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-hermes-remote> client # [ 1.847822] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c180 vm-test-run-hermes-remote> client # [ 1.853303] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> client # [ 1.854745] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 1.857283] usb usb2: Product: UHCI Host Controller vm-test-run-hermes-remote> client # [ 1.858141] usb usb2: Manufacturer: Linux 6.18.53 uhci_hcd vm-test-run-hermes-remote> client # [ 1.860976] usb usb2: SerialNumber: 0000:00:1d.0 vm-test-run-hermes-remote> client # [ 1.861983] hub 2-0:1.0: USB hub found vm-test-run-hermes-remote> client # [ 1.862938] hub 2-0:1.0: 2 ports detected vm-test-run-hermes-remote> client # [ 1.865413] uhci_hcd 0000:00:1d.1: UHCI Host Controller vm-test-run-hermes-remote> client # [ 1.866257] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 vm-test-run-hermes-remote> client # [ 1.693362] (udev-worker)[95]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 1.695088] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 1.874730] uhci_hcd 0000:00:1d.1: detected 2 ports vm-test-run-hermes-remote> client # [ 1.875696] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c1a0 vm-test-run-hermes-remote> client # [ 1.877822] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> client # [ 1.879331] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 1.702699] (udev-worker)[99][ 1.880549] usb usb3: Product: UHCI Host Controller vm-test-run-hermes-remote> client # : eth1: Config file /etc[ 1.881628] usb usb3: Manufacturer: Linux 6.18.53 uhci_hcd vm-test-run-hermes-remote> client # /systemd/network/40-eth1.link is applied to devi[ 1.882867] usb usb3: SerialNumber: 0000:00:1d.1 vm-test-run-hermes-remote> client # ce based on potentially unpredictable interface name.[ 1.884279] hub 3-0:1.0: USB hub found vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # [ 1.709972] (udev-worker)[99]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 1.891485] hub 3-0:1.0: 2 ports detected vm-test-run-hermes-remote> client # [ 1.896265] SCSI subsystem initialized vm-test-run-hermes-remote> client # [ 1.720837] systemd-vconsole-setup[112]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> client # [ 1.723342] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 1.840208] virtio_blk virtio2: 4/0/0 default/read/poll queues vm-test-run-hermes-remote> server # [ 1.843630] virtio_blk virtio2: [vda] 50331648 512-byte logical blocks (25.8 GB/24.0 GiB) vm-test-run-hermes-remote> client # [ 1.909766] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 vm-test-run-hermes-remote> client # [ 1.733079] systemd[1]: Found device /dev/disk/by-label/nixos. vm-test-run-hermes-remote> client # [ 1.736175] systemd[1]: Reached target Initrd Root Device. vm-test-run-hermes-remote> client # [ 1.915285] uhci_hcd 0000:00:1d.2: UHCI Host Controller vm-test-run-hermes-remote> server # [ 1.848303] uhci_hcd 0000:00:1d.0: UHCI Host Controller vm-test-run-hermes-remote> client # [ 1.916189] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 vm-test-run-hermes-remote> client # [ 1.740411] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... vm-test-run-hermes-remote> server # [ 1.854206] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 vm-test-run-hermes-remote> server # [ 1.855488] uhci_hcd 0000:00:1d.0: detected 2 ports vm-test-run-hermes-remote> client # [ 1.920264] uhci_hcd 0000:00:1d.2: detected 2 ports vm-test-run-hermes-remote> server # [ 1.856452] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c180 vm-test-run-hermes-remote> client # [ 1.921444] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c1c0 vm-test-run-hermes-remote> client # [ 1.922509] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> server # [ 1.857868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> server # [ 1.859332] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 1.924146] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> server # [ 1.860606] usb usb1: Product: UHCI Host Controller vm-test-run-hermes-remote> server # [ 1.861439] usb usb1: Manufacturer: Linux 6.18.53 uhci_hcd vm-test-run-hermes-remote> server # [ 1.862712] usb usb1: SerialNumber: 0000:00:1d.0 vm-test-run-hermes-remote> server # [ 1.864598] hub 1-0:1.0: USB hub found vm-test-run-hermes-remote> client # [ 1.929881] usb usb4: Product: UHCI Host Controller vm-test-run-hermes-remote> server # [ 1.864675] SCSI subsystem initialized vm-test-run-hermes-remote> server # [ 1.864843] hub 1-0:1.0: 2 ports detected vm-test-run-hermes-remote> client # [ 1.930980] usb usb4: Manufacturer: Linux 6.18.53 uhci_hcd vm-test-run-hermes-remote> client # [ 1.932038] usb usb4: SerialNumber: 0000:00:1d.2 vm-test-run-hermes-remote> server # [ 1.868284] ehci-pci 0000:00:1d.7: EHCI Host Controller vm-test-run-hermes-remote> client # [ 1.933393] hub 4-0:1.0: USB hub found vm-test-run-hermes-remote> client # [ 1.934260] hub 4-0:1.0: 2 ports detected vm-test-run-hermes-remote> server # [ 1.869208] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 vm-test-run-hermes-remote> server # [ 1.870771] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 vm-test-run-hermes-remote> server # [ 1.877641] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 vm-test-run-hermes-remote> client # [ 1.764874] systemd-fsck[120]: nixos: clean, 12/65536 files, 13019/262144 blocks vm-test-run-hermes-remote> server # [ 1.878811] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 vm-test-run-hermes-remote> client # [ 1.945202] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode vm-test-run-hermes-remote> server # [ 1.881179] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 1.946528] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) vm-test-run-hermes-remote> server # [ 1.882426] usb usb2: Product: EHCI Host Controller vm-test-run-hermes-remote> server # [ 1.883252] usb usb2: Manufacturer: Linux 6.18.53 ehci_hcd vm-test-run-hermes-remote> server # [ 1.884136] usb usb2: SerialNumber: 0000:00:1d.7 vm-test-run-hermes-remote> client # [ 1.771569] systemd[1]: Finis[ 1.948815] ahci 0000:00:1f.2: flags: 64bit ncq only vm-test-run-hermes-remote> server # [ 1.885111] hub 2-0:1.0: USB hub found vm-test-run-hermes-remote> client # hed File System Check on /dev/disk/by-label/nixos. vm-test-run-hermes-remote> server # [ 1.885849] hub 2-0:1.0: 6 ports detected vm-test-run-hermes-remote> client # [ 1.952077] scsi host0: ahci vm-test-run-hermes-remote> client # [ 1.952913] scsi host1: ahci vm-test-run-hermes-remote> client # [ 1.953749] scsi host2: ahci vm-test-run-hermes-remote> client # [ 1.954554] scsi host3: ahci vm-test-run-hermes-remote> client # [ 1.955333] scsi host4: ahci vm-test-run-hermes-remote> client # [ 1.956123] scsi host5: ahci vm-test-run-hermes-remote> server # [ 1.891603] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 vm-test-run-hermes-remote> client # [ 1.956789] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 48 lpm-pol 1 vm-test-run-hermes-remote> client # [ 1.958091] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 48 lpm-pol 1 vm-test-run-hermes-remote> client # [ 1.960633] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 48 lpm-pol 1 vm-test-run-hermes-remote> client # [ 1.961995] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 48 lpm-pol 1 vm-test-run-hermes-remote> server # [ 1.899111] serio: i8042 KBD port at 0x60,0x64 irq 1 vm-test-run-hermes-remote> client # [ 1.963421] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 48 lpm-pol 1 vm-test-run-hermes-remote> server # [ 1.900357] serio: i8042 AUX port at 0x60,0x64 irq 12 vm-test-run-hermes-remote> client # [ 1.964925] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 48 lpm-pol 1 vm-test-run-hermes-remote> server # [ 1.727754] (udev-worker)[128]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> server # [ 1.730873] (udev-worker)[135]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> server # [ 1.732535] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 1.736094] (udev-worker)[128]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> server # [ 1.738619] systemd[1]: Found device /dev/disk/by-label/nixos. vm-test-run-hermes-remote> server # [ 1.739726] systemd[1]: Reached target Initrd Root Device. vm-test-run-hermes-remote> server # [ 1.740978] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... vm-test-run-hermes-remote> server # [ 1.931301] hub 1-0:1.0: USB hub found vm-test-run-hermes-remote> server # [ 1.931980] hub 1-0:1.0: 2 ports detected vm-test-run-hermes-remote> server # [ 1.933565] uhci_hcd 0000:00:1d.1: UHCI Host Controller vm-test-run-hermes-remote> server # [ 1.934456] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 vm-test-run-hermes-remote> server # [ 1.935686] uhci_hcd 0000:00:1d.1: detected 2 ports vm-test-run-hermes-remote> server # [ 1.935810] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c1a0 vm-test-run-hermes-remote> server # [ 1.936966] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> server # [ 1.936968] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> server # [ 1.936969] usb usb3: Product: UHCI Host Controller vm-test-run-hermes-remote> server # [ 1.936970] usb usb3: Manufacturer: Linux 6.18.53 uhci_hcd vm-test-run-hermes-remote> server # [ 1.936971] usb usb3: SerialNumber: 0000:00:1d.1 vm-test-run-hermes-remote> server # [ 1.940382] hub 3-0:1.0: USB hub found vm-test-run-hermes-remote> server # [ 1.947474] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode vm-test-run-hermes-remote> server # [ 1.947585] hub 3-0:1.0: 2 ports detected vm-test-run-hermes-remote> server # [ 1.947825] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) vm-test-run-hermes-remote> server # [ 1.949745] uhci_hcd 0000:00:1d.2: UHCI Host Controller vm-test-run-hermes-remote> server # [ 1.952447] ahci 0000:00:1f.2: flags: 64bit ncq only vm-test-run-hermes-remote> server # [ 1.952950] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 vm-test-run-hermes-remote> server # [ 1.953856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 vm-test-run-hermes-remote> server # [ 1.953944] uhci_hcd 0000:00:1d.2: detected 2 ports vm-test-run-hermes-remote> server # [ 1.957336] scsi host0: ahci vm-test-run-hermes-remote> server # [ 1.758346] systemd-vconsole-setup[142]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> server # [ 1.960481] scsi host1: ahci vm-test-run-hermes-remote> server # [ 1.961430] scsi host2: ahci vm-test-run-hermes-remote> server # [ 1.962767] scsi host3: ahci vm-test-run-hermes-remote> server # [ 1.964640] scsi host4: ahci vm-test-run-hermes-remote> server # [ 1.777855] systemd[1]: Finished Virtual Cons[ 1.965436] scsi host5: ahci vm-test-run-hermes-remote> server # ole Setup. vm-test-run-hermes-remote> server # [ 1.966391] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 50 lpm-pol 1 vm-test-run-hermes-remote> server # [ 1.966656] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c1c0 vm-test-run-hermes-remote> server # [ 1.966778] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 50 lpm-pol 1 vm-test-run-hermes-remote> server # [ 1.780361] systemd-fsck[159]: nixos: clean, [ 1.970407] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 50 lpm-pol 1 vm-test-run-hermes-remote> server # 12/1572864 files, 142772/6291456 blocks vm-test-run-hermes-remote> server # [ 1.786975] systemd[1]: Finished File System [ 1.971314] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> server # Check on /dev/di[ 1.972236] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 50 lpm-pol 1 vm-test-run-hermes-remote> server # sk/by-label/nixo[ 1.972712] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> server # s.[ 1.973011] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 50 lpm-pol 1 vm-test-run-hermes-remote> server # [ 1.973401] usb usb4: Product: UHCI Host Controller vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # [ 1.973673] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 50 lpm-pol 1 vm-test-run-hermes-remote> server # [ 1.973997] usb usb4: Manufacturer: Linux 6.18.53 uhci_hcd vm-test-run-hermes-remote> server # [ 1.981318] usb usb4: SerialNumber: 0000:00:1d.2 vm-test-run-hermes-remote> server # [ 1.982189] hub 4-0:1.0: USB hub found vm-test-run-hermes-remote> server # [ 1.982920] hub 4-0:1.0: 2 ports detected vm-test-run-hermes-remote> client # [ 2.075359] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-hermes-remote> client # [ 2.205173] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 vm-test-run-hermes-remote> client # [ 2.206456] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 vm-test-run-hermes-remote> client # [ 2.207828] usb 1-1: Product: QEMU USB Tablet vm-test-run-hermes-remote> client # [ 2.208581] usb 1-1: Manufacturer: QEMU vm-test-run-hermes-remote> client # [ 2.209229] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1 vm-test-run-hermes-remote> server # [ 2.146320] usb 2-1: new high-speed USB device number 2 using ehci-pci vm-test-run-hermes-remote> client # [ 2.220021] hid: raw HID events driver (C) Jiri Kosina vm-test-run-hermes-remote> client # [ 2.273594] ata2: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.274966] ata1: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.281716] ata6: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.283072] ata5: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.284100] ata4: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.285135] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) vm-test-run-hermes-remote> client # [ 2.286193] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 vm-test-run-hermes-remote> client # [ 2.287121] ata3.00: applying bridge limits vm-test-run-hermes-remote> client # [ 2.287962] ata3.00: configured for UDMA/100 vm-test-run-hermes-remote> client # [ 2.289049] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 vm-test-run-hermes-remote> client # [ 2.310778] usbcore: registered new interface driver usbhid vm-test-run-hermes-remote> client # [ 2.311671] usbhid: USB HID core driver vm-test-run-hermes-remote> client # [ 2.314977] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 vm-test-run-hermes-remote> client # [ 2.316755] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 vm-test-run-hermes-remote> client # [ 2.338533] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray vm-test-run-hermes-remote> server # [ 2.277080] usb 2-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 vm-test-run-hermes-remote> server # [ 2.278476] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 vm-test-run-hermes-remote> server # [ 2.279711] usb 2-1: Product: QEMU USB Tablet vm-test-run-hermes-remote> server # [ 2.280509] usb 2-1: Manufacturer: QEMU vm-test-run-hermes-remote> server # [ 2.281204] usb 2-1: SerialNumber: 28754-0000:00:1d.7-1 vm-test-run-hermes-remote> server # [ 2.288900] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) vm-test-run-hermes-remote> server # [ 2.290123] ata5: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.291171] ata2: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.293391] ata4: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.293668] hid: raw HID events driver (C) Jiri Kosina vm-test-run-hermes-remote> server # [ 2.294484] ata1: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.296094] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 vm-test-run-hermes-remote> server # [ 2.297075] ata3.00: applying bridge limits vm-test-run-hermes-remote> server # [ 2.297972] ata6: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.299006] ata3.00: configured for UDMA/100 vm-test-run-hermes-remote> server # [ 2.300109] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 vm-test-run-hermes-remote> client # [ 2.372499] cdrom: Uniform CD-ROM driver Revision: 3.20 vm-test-run-hermes-remote> server # [ 2.328659] usbcore: registered new interface driver usbhid vm-test-run-hermes-remote> server # [ 2.329558] usbhid: USB HID core driver vm-test-run-hermes-remote> server # [ 2.333825] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input2 vm-test-run-hermes-remote> server # [ 2.343881] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 vm-test-run-hermes-remote> server # [ 2.361455] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray vm-test-run-hermes-remote> server # [ 2.406430] cdrom: Uniform CD-ROM driver Revision: 3.20 vm-test-run-hermes-remote> client # [ 2.393098] systemd[1]: Mounting /sysroot... vm-test-run-hermes-remote> client # [ 2.655147] EXT4-fs (vda): mounted filesystem 36b74c74-8705-4867-a7c0-0e330e664ce5 r/w with ordered data mode. Quota mode: none. vm-test-run-hermes-remote> client # [ 2.480878] systemd[1]: Mounted /sysroot. vm-test-run-hermes-remote> client # [ 2.481925] systemd[1]: Reached target Initrd Root File System. vm-test-run-hermes-remote> client # [ 2.483803] systemd[1]: Mounting /sysroot/nix/.ro-store... vm-test-run-hermes-remote> client # [ 2.485617] systemd[1]: Mounting /sysroot/nix/.rw-store... vm-test-run-hermes-remote> client # [ 2.491970] systemd[1]: Mounting /sysroot/run... vm-test-run-hermes-remote> client # [ 2.493669] systemd[1]: Mounting /sysroot/tmp/shared... vm-test-run-hermes-remote> client # [ 2.496971] systemd[1]: Mounting /sysroot/tmp/xchg... vm-test-run-hermes-remote> client # [ 2.498535] systemd[1]: Starting Mountpoints Configured in the Real Root... vm-test-run-hermes-remote> client # [ 2.501145] systemd[1]: Mounted /sysroot/nix/.ro-store. vm-test-run-hermes-remote> client # [ 2.504395] systemd[1]: Mounted /sysroot/nix/.rw-store. vm-test-run-hermes-remote> client # [ 2.506509] systemd[1]: Mounted /sysroot/run. vm-test-run-hermes-remote> client # [ 2.507370] systemd[1]: Mounted /sysroot/tmp/shared. vm-test-run-hermes-remote> client # [ 2.509225] systemd[1]: Mounted /sysroot/tmp/xchg. vm-test-run-hermes-remote> client # [ 2.512514] systemd-sysroot-fstab-check[160]: /sysroot should be mounted in the initrd, will request daemon-reload. vm-test-run-hermes-remote> client # [ 2.515223] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> client # [ 2.516469] systemd[1]: Reload requested from client PID 160 ('systemd-sysroot') (unit initrd-parse-etc.service)... vm-test-run-hermes-remote> client # [ 2.518261] systemd[1]: Reloading... vm-test-run-hermes-remote> server # [ 2.473809] systemd[1]: Mounting /sysroot... vm-test-run-hermes-remote> client # [ 2.557388] systemd[1]: Reloading finished in 38 ms. vm-test-run-hermes-remote> client # [ 2.571469] systemd-sysroot-fstab-check[160]: Requesting initrd-fs.target/start/replace... vm-test-run-hermes-remote> client # [ 2.573243] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 2.574522] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> client # [ 2.575567] systemd-sysroot-fstab-check[160]: Requesting swap.target/start/replace... vm-test-run-hermes-remote> client # [ 2.580062] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> client # [ 2.581099] systemd[1]: initrd-parse-etc.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 2.582266] systemd[1]: Finished Mountpoints Configured in the Real Root. vm-test-run-hermes-remote> client # [ 2.583373] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. vm-test-run-hermes-remote> client # [ 2.590842] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 2.592519] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 2.736155] EXT4-fs (vda): mounted filesystem febd8d48-828a-4af2-960f-2952144934fb r/w with ordered data mode. Quota mode: none. vm-test-run-hermes-remote> server # [ 2.551911] systemd[1]: Mounted /sysroot. vm-test-run-hermes-remote> server # [ 2.552709] systemd[1]: Reached target Initrd Root File System. vm-test-run-hermes-remote> server # [ 2.553663] systemd[1]: Mounting /sysroot/nix/.ro-store... vm-test-run-hermes-remote> server # [ 2.554610] systemd[1]: Mounting /sysroot/nix/.rw-store... vm-test-run-hermes-remote> server # [ 2.564558] systemd[1]: Mounting /sysroot/run... vm-test-run-hermes-remote> server # [ 2.567205] systemd[1]: Mounting /sysroot/tmp/shared... vm-test-run-hermes-remote> server # [ 2.570146] systemd[1]: Mounting /sysroot/tmp/xchg... vm-test-run-hermes-remote> server # [ 2.571128] systemd[1]: Starting Mountpoints Configured in the Real Root... vm-test-run-hermes-remote> server # [ 2.574516] systemd[1]: Mounted /sysroot/nix/.ro-store. vm-test-run-hermes-remote> server # [ 2.575886] systemd[1]: Mounted /sysroot/nix/.rw-store. vm-test-run-hermes-remote> server # [ 2.576852] systemd-sysroot-fstab-check[190]: /sysroot should be mounted in the initrd, will request daemon-reload. vm-test-run-hermes-remote> server # [ 2.578419] systemd[1]: Mounted /sysroot/run. vm-test-run-hermes-remote> server # [ 2.579200] systemd[1]: Mounted /sysroot/tmp/shared. vm-test-run-hermes-remote> server # [ 2.580114] systemd[1]: Mounted /sysroot/tmp/xchg. vm-test-run-hermes-remote> server # [ 2.584408] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 2.585442] systemd[1]: Reload requested from client PID 190 ('systemd-sysroot') (unit initrd-parse-etc.service)... vm-test-run-hermes-remote> server # [ 2.587152] systemd[1]: Reloading... vm-test-run-hermes-remote> server # [ 2.624190] systemd[1]: Reloading finished in 36 ms. vm-test-run-hermes-remote> server # [ 2.645288] systemd-sysroot-fstab-check[190]: Requesting initrd-fs.target/start/replace... vm-test-run-hermes-remote> server # [ 2.647671] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 2.649097] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 2.650994] systemd-sysroot-fstab-check[190]: Requesting swap.target/start/replace... vm-test-run-hermes-remote> server # [ 2.653287] systemd[1]: initrd-parse-etc.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 2.654661] systemd[1]: Finished Mountpoints Configured in the Real Root. vm-test-run-hermes-remote> server # [ 2.655695] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. vm-test-run-hermes-remote> server # [ 2.657740] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 2.674393] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 2.675519] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> client # [ 3.393694] systemd[1]: Mounting /sysroot/nix/store... vm-test-run-hermes-remote> client # [ 3.415502] systemd[1]: Mounted /sysroot/nix/store. vm-test-run-hermes-remote> client # [ 3.416472] systemd[1]: Reached target Initrd File Systems. vm-test-run-hermes-remote> client # [ 3.417515] systemd[1]: Starting Find NixOS closure... vm-test-run-hermes-remote> client # [ 3.418862] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-hermes-remote> client # [ 3.438365] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> client # [ 3.440392] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.442792] systemd[1]: Finished Find NixOS closure. vm-test-run-hermes-remote> client # [ 3.444122] systemd[1]: Reached target Initrd Default Target. vm-test-run-hermes-remote> client # [ 3.445901] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-hermes-remote> client # [ 3.461497] systemd[1]: Stopped target Initrd Default Target. vm-test-run-hermes-remote> client # [ 3.462757] systemd[1]: Stopped target Basic System. vm-test-run-hermes-remote> client # [ 3.463683] systemd[1]: Stopped target Initrd Root Device. vm-test-run-hermes-remote> client # [ 3.464612] systemd[1]: Stopped target Path Units. vm-test-run-hermes-remote> client # [ 3.465508] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.466768] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 3.468080] systemd[1]: Stopped target Slice Units. vm-test-run-hermes-remote> client # [ 3.468946] systemd[1]: Stopped target Socket Units. vm-test-run-hermes-remote> client # [ 3.469814] systemd[1]: Stopped target System Initialization. vm-test-run-hermes-remote> client # [ 3.470877] systemd[1]: Stopped target Swaps. vm-test-run-hermes-remote> client # [ 3.471775] systemd[1]: Stopped target Timer Units. vm-test-run-hermes-remote> client # [ 3.472650] systemd[1]: dbus.socket: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.473746] systemd[1]: Closed D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 3.474831] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.476158] systemd[1]: Stopped Find NixOS closure. vm-test-run-hermes-remote> client # [ 3.479064] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> client # [ 3.480253] systemd[1]: systemd-sysctl.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.481405] systemd[1]: Stopped Apply Kernel Variables. vm-test-run-hermes-remote> client # [ 3.482344] systemd[1]: systemd-modules-load.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.485380] systemd[1]: Stopped Load Kernel Modules. vm-test-run-hermes-remote> client # [ 3.487196] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.488863] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> client # [ 3.490190] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.491446] systemd[1]: Stopped Create System Files and Directories. vm-test-run-hermes-remote> client # [ 3.493119] systemd[1]: Stopped target Local File Systems. vm-test-run-hermes-remote> client # [ 3.494893] systemd[1]: Stopped target Preparation for Local File Systems. vm-test-run-hermes-remote> client # [ 3.496077] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.497274] systemd[1]: Stopped Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 3.498245] systemd[1]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> client # [ 3.499485] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.500951] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> client # [ 3.501806] systemd[1]: initrd-cleanup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.502968] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. vm-test-run-hermes-remote> client # [ 3.504278] systemd[1]: systemd-udevd.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.505776] systemd[1]: Stopped Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> client # [ 3.507448] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.509053] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> client # [ 3.512190] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.513372] systemd[1]: Closed udev Control Socket. vm-test-run-hermes-remote> client # [ 3.516095] systemd[1]: Starting Cleanup udev Database... vm-test-run-hermes-remote> client # [ 3.517157] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.518424] systemd[1]: Stopped Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 3.521105] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.522517] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> client # [ 3.523916] systemd[1]: kmod-static-nodes.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.525186] systemd[1]: Stopped Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 3.528153] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.530129] systemd[1]: Finished Cleanup udev Database. vm-test-run-hermes-remote> client # [ 3.531132] systemd[1]: Reached target Switch Root. vm-test-run-hermes-remote> client # [ 3.532103] systemd[1]: Starting NixOS Activation... vm-test-run-hermes-remote> server # [ 3.474163] systemd[1]: Mounting /sysroot/nix/store... vm-test-run-hermes-remote> server # [ 3.502060] systemd[1]: Mounted /sysroot/nix/store. vm-test-run-hermes-remote> server # [ 3.503146] systemd[1]: Reached target Initrd File Systems. vm-test-run-hermes-remote> server # [ 3.504253] systemd[1]: Starting Find NixOS closure... vm-test-run-hermes-remote> server # [ 3.505241] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-hermes-remote> client # [ 3.599836] initrd-nixos-activation-start[206]: booting system configuration /nix/store/7pv67q5bm0bn1bnjn20hh25yc175gzqr-nixos-system-client-test vm-test-run-hermes-remote> server # [ 3.530064] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 3.531550] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.537485] systemd[1]: Finished Find NixOS closure. vm-test-run-hermes-remote> server # [ 3.538354] systemd[1]: Reached target Initrd Default Target. vm-test-run-hermes-remote> server # [ 3.539368] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-hermes-remote> server # [ 3.546910] systemd[1]: Stopped target Initrd Default Target. vm-test-run-hermes-remote> server # [ 3.547942] systemd[1]: Stopped target Basic System. vm-test-run-hermes-remote> server # [ 3.548847] systemd[1]: Stopped target Initrd Root Device. vm-test-run-hermes-remote> client # [ 3.623404] initrd-nixos-activation-start[206]: running activation script... vm-test-run-hermes-remote> server # [ 3.549840] systemd[1]: Stopped target Path Units. vm-test-run-hermes-remote> server # [ 3.550712] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.552256] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 3.554149] systemd[1]: Stopped target Slice Units. vm-test-run-hermes-remote> server # [ 3.555136] systemd[1]: Stopped target Socket Units. vm-test-run-hermes-remote> server # [ 3.557118] systemd[1]: Stopped target System Initialization. vm-test-run-hermes-remote> server # [ 3.558172] systemd[1]: Stopped target Swaps. vm-test-run-hermes-remote> server # [ 3.559048] systemd[1]: Stopped target Timer Units. vm-test-run-hermes-remote> server # [ 3.559916] systemd[1]: dbus.socket: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.560944] systemd[1]: Closed D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 3.561963] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.563220] systemd[1]: Stopped Find NixOS closure. vm-test-run-hermes-remote> server # [ 3.564104] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 3.565158] systemd[1]: systemd-sysctl.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.566346] systemd[1]: Stopped Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 3.567281] systemd[1]: systemd-modules-load.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.568478] systemd[1]: Stopped Load Kernel Modules. vm-test-run-hermes-remote> server # [ 3.569375] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.570681] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 3.571956] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.573190] systemd[1]: Stopped Create System Files and Directories. vm-test-run-hermes-remote> server # [ 3.574266] systemd[1]: Stopped target Local File Systems. vm-test-run-hermes-remote> server # [ 3.575227] systemd[1]: Stopped target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 3.576399] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.577713] systemd[1]: Stopped Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 3.578661] systemd[1]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 3.579914] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.581154] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 3.582074] systemd[1]: initrd-cleanup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.583219] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. vm-test-run-hermes-remote> server # [ 3.584306] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.585499] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 3.586481] systemd[1]: systemd-udevd.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.587583] systemd[1]: Stopped Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 3.588767] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.589974] systemd[1]: Closed udev Control Socket. vm-test-run-hermes-remote> server # [ 3.590845] systemd[1]: Starting Cleanup udev Database... vm-test-run-hermes-remote> server # [ 3.591785] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.593080] systemd[1]: Stopped Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 3.594173] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.595544] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 3.596778] systemd[1]: kmod-static-nodes.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.597966] systemd[1]: Stopped Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 3.599067] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.600321] systemd[1]: Finished Cleanup udev Database. vm-test-run-hermes-remote> server # [ 3.601250] systemd[1]: Reached target Switch Root. vm-test-run-hermes-remote> server # [ 3.602162] systemd[1]: Starting NixOS Activation... vm-test-run-hermes-remote> server # [ 3.659476] initrd-nixos-activation-start[237]: booting system configuration /nix/store/y6g0lvfvcx3ndpwnfc9i2hkjvd254m6b-nixos-system-server-test vm-test-run-hermes-remote> server # [ 3.681766] initrd-nixos-activation-start[237]: running activation script... vm-test-run-hermes-remote> client # [ 3.784324] initrd-nixos-activation-start[229]: setting up /etc... vm-test-run-hermes-remote> client # [ 3.863763] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.865268] systemd[1]: Finished NixOS Activation. vm-test-run-hermes-remote> client # [ 3.867165] systemd[1]: Starting Switch Root... vm-test-run-hermes-remote> client # [ 3.883321] systemd[1]: Switching root. vm-test-run-hermes-remote> server # [ 3.841298] initrd-nixos-activation-start[260]: setting up /etc... vm-test-run-hermes-remote> client # [ 4.102407] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). vm-test-run-hermes-remote> client # [ 4.158730] NET: Registered PF_VSOCK protocol family vm-test-run-hermes-remote> server # [ 3.930522] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.931834] systemd[1]: Finished NixOS Activation. vm-test-run-hermes-remote> server # [ 3.932673] systemd[1]: Starting Switch Root... vm-test-run-hermes-remote> server # [ 3.953478] systemd[1]: Switching root. vm-test-run-hermes-remote> server # [ 4.190888] systemd-journald[90]: Received SIGTERM from PID 1 (systemd). vm-test-run-hermes-remote> server # [ 4.237139] NET: Registered PF_VSOCK protocol family vm-test-run-hermes-remote> client # [ 4.524987] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> client # [ 4.529330] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> client # [ 4.530133] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> client # [ 4.531001] systemd[1]: Detected first boot. vm-test-run-hermes-remote> client # [ 4.532810] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> client # [ 4.632434] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> client # [ 4.670574] systemd[1]: Applying preset policy. vm-test-run-hermes-remote> server # [ 4.606928] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> server # [ 4.611288] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> server # [ 4.612086] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> server # [ 4.612965] systemd[1]: Detected first boot. vm-test-run-hermes-remote> server # [ 4.614862] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> server # [ 4.704551] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> server # [ 4.732593] systemd[1]: Applying preset policy. vm-test-run-hermes-remote> client # [ 4.809985] systemd[1]: Populated /etc with preset unit settings. vm-test-run-hermes-remote> server # [ 4.870746] systemd[1]: Populated /etc with preset unit settings. vm-test-run-hermes-remote> client # [ 4.985304] systemd[1]: initrd-switch-root.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 4.986908] systemd[1]: Stopped initrd-switch-root.service. vm-test-run-hermes-remote> client # [ 4.988977] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. vm-test-run-hermes-remote> client # [ 4.991099] systemd[1]: Created slice Slice /system/getty. vm-test-run-hermes-remote> client # [ 4.992576] systemd[1]: Created slice User and Session Slice. vm-test-run-hermes-remote> client # [ 4.993627] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 5.003083] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-hermes-remote> client # [ 5.004368] systemd[1]: Expecting device /dev/hvc0... vm-test-run-hermes-remote> client # [ 5.005186] systemd[1]: Expecting device /dev/ttyS0... vm-test-run-hermes-remote> client # [ 5.006106] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-hermes-remote> client # [ 5.007116] systemd[1]: Stopped target initrd-fs.target. vm-test-run-hermes-remote> client # [ 5.008018] systemd[1]: Stopped target initrd-root-fs.target. vm-test-run-hermes-remote> client # [ 5.008971] systemd[1]: Stopped target initrd-switch-root.target. vm-test-run-hermes-remote> client # [ 5.009976] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-hermes-remote> client # [ 5.011057] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> client # [ 5.011907] systemd[1]: Reached target Remote File Systems. vm-test-run-hermes-remote> client # [ 5.012867] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> client # [ 5.013722] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> client # [ 5.015335] systemd[1]: Listening on Query the User Interactively for a Password. vm-test-run-hermes-remote> client # [ 5.017570] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-hermes-remote> client # [ 5.019317] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-hermes-remote> client # [ 5.021147] systemd[1]: Listening on Factory Reset Management. vm-test-run-hermes-remote> client # [ 5.022271] systemd[1]: Listening on Hostname Service Socket. vm-test-run-hermes-remote> client # [ 5.024633] systemd[1]: Starting Journal Log Access Socket... vm-test-run-hermes-remote> client # [ 5.025928] systemd[1]: Listening on Journal Audit Socket. vm-test-run-hermes-remote> client # [ 5.027723] systemd[1]: Listening on Console Output Muting Service Socket. vm-test-run-hermes-remote> client # [ 5.029032] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-hermes-remote> client # [ 5.030365] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 5.031862] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki vm-test-run-hermes-remote> client # [ 5.035572] systemd[1]: Listening on Disk Repartitioning Service Socket. vm-test-run-hermes-remote> client # [ 5.036743] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> client # [ 5.037770] systemd[1]: Listening on udev Varlink Socket. vm-test-run-hermes-remote> client # [ 5.039741] systemd[1]: Mounting Huge Pages File System... vm-test-run-hermes-remote> client # [ 5.041641] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-hermes-remote> client # [ 5.045600] systemd[1]: Mounting Kernel Debug File System... vm-test-run-hermes-remote> client # [ 5.053690] systemd[1]: Mounting Kernel Trace File System... vm-test-run-hermes-remote> server # [ 4.988908] systemd[1]: microvm@hermes-alice.service: Service uses a combination of Type=simple, ExecStartPost=, and credentials. This could lead to race conditions. Continuing. vm-test-run-hermes-remote> client # [ 5.055916] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> client # [ 5.058755] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> client # [ 5.059774] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm vm-test-run-hermes-remote> client # [ 5.061332] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> client # [ 5.063055] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> client # [ 5.065650] systemd[1]: Mounting FUSE Control File System... vm-test-run-hermes-remote> client # [ 5.066641] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> client # [ 5.072578] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> client # [ 5.079590] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> client # [ 5.089615] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-hermes-remote> client # [ 5.092383] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-hermes-remote> client # [ 5.094926] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 5.105824] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> client # [ 5.110822] systemd-journald[299]: Collecting audit messages is enabled. vm-test-run-hermes-remote> client # [ 5.111515] systemd[1]: Listening on Journal Log Access Socket. vm-test-run-hermes-remote> client # [ 5.115876] systemd[1]: Mounted Huge Pages File System. vm-test-run-hermes-remote> client # [ 5.116874] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-hermes-remote> client # [ 5.120258] systemd[1]: Mounted Kernel Debug File System. vm-test-run-hermes-remote> client # [ 5.121277] systemd[1]: Mounted Kernel Trace File System. vm-test-run-hermes-remote> client # [ 5.122403] loop: module loaded vm-test-run-hermes-remote> client # [ 5.123776] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 5.125609] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 4.949732] systemd[1]: Queued start job for [ 5.127134] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> client # default target Multi-User System.[ 5.128506] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # [ 5.129939] EXT4-fs (vda): re-mounted 36b74c74-8705-4867-a7c0-0e330e664ce5. vm-test-run-hermes-remote> server # [ 5.066154] systemd[1]: initrd-switch-root.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 4.953373] systemd[1]: systemd-journald.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 5.067672] systemd[1]: Stopped initrd-switch-root.service. vm-test-run-hermes-remote> server # [ 5.069808] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. vm-test-run-hermes-remote> client # [ 4.958690] systemd-modules-load[300]: Using 2 probe threads vm-test-run-hermes-remote> server # [ 5.071888] systemd[1]: Created slice Slice /system/getty. vm-test-run-hermes-remote> client # [ 4.960109] systemd-modules-load[300]: Inserted module 'loop' vm-test-run-hermes-remote> server # [ 5.073315] systemd[1]: Created slice Slice /system/microvm. vm-test-run-hermes-remote> client # [ 4.961328] systemd[1]: Mounted FUSE Control File System. vm-test-run-hermes-remote> server # [ 5.074761] systemd[1]: Created slice Slice /system/microvm-macvtap-interfaces. vm-test-run-hermes-remote> client # [ 4.962841] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 5.076438] systemd[1]: Created slice Slice /system/microvm-pci-devices. vm-test-run-hermes-remote> client # [ 4.965270] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-hermes-remote> server # [ 5.077969] systemd[1]: Created slice Slice /system/microvm-set-booted. vm-test-run-hermes-remote> client # [ 4.966469] systemd[1]: Starting Firewall... vm-test-run-hermes-remote> server # [ 5.079505] systemd[1]: Created slice Slice /system/microvm-tap-interfaces. vm-test-run-hermes-remote> server # [ 5.081031] systemd[1]: Created slice Slice /system/microvm-virtiofsd. vm-test-run-hermes-remote> client # [ 4.968943] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 5.082575] systemd[1]: Created slice User and Session Slice. vm-test-run-hermes-remote> server # [ 5.083594] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 4.971448] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 5.084924] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-hermes-remote> server # [ 5.086201] systemd[1]: Expecting device /dev/hvc0... vm-test-run-hermes-remote> server # [ 5.087009] systemd[1]: Expecting device /dev/ttyS0... vm-test-run-hermes-remote> server # [ 5.087897] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-hermes-remote> server # [ 5.088862] systemd[1]: Stopped target initrd-fs.target. vm-test-run-hermes-remote> server # [ 5.089754] systemd[1]: Stopped target initrd-root-fs.target. vm-test-run-hermes-remote> server # [ 5.090717] systemd[1]: Stopped target initrd-switch-root.target. vm-test-run-hermes-remote> server # [ 5.091741] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-hermes-remote> server # [ 5.092826] systemd[1]: Reached target Remote File Systems. vm-test-run-hermes-remote> server # [ 5.093777] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> client # [ 4.981208] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-hermes-remote> server # [ 5.094656] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> server # [ 5.096436] systemd[1]: Listening on Query the User Interactively for a Password. vm-test-run-hermes-remote> server # [ 5.098902] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-hermes-remote> client # [ 4.988076] systemd[1]: Listening on Disk Image Download Service Socket. vm-test-run-hermes-remote> server # [ 5.100712] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-hermes-remote> server # [ 5.102624] systemd[1]: Listening on Factory Reset Management. vm-test-run-hermes-remote> server # [ 5.103683] systemd[1]: Listening on Hostname Service Socket. vm-test-run-hermes-remote> client # [ 4.992234] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-hermes-remote> server # [ 5.106309] systemd[1]: Starting Journal Log Access Socket... vm-test-run-hermes-remote> server # [ 5.107551] systemd[1]: Listening on Journal Audit Socket. vm-test-run-hermes-remote> client # [ 4.993468] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> server # [ 5.109453] systemd[1]: Listening on Console Output Muting Service Socket. vm-test-run-hermes-remote> client # [ 4.998081] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-hermes-remote> server # [ 5.110688] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-hermes-remote> client # [ 4.999203] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 5.111930] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 5.113439] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki vm-test-run-hermes-remote> client # [ 5.001517] systemd-oomd[302]: No swap; memory pressure usage will be degraded vm-test-run-hermes-remote> client # [ 5.004575] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-hermes-remote> server # [ 5.117560] systemd[1]: Listening on Disk Repartitioning Service Socket. vm-test-run-hermes-remote> client # [ 5.005853] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-hermes-remote> server # [ 5.118716] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 5.119719] systemd[1]: Listening on udev Varlink Socket. vm-test-run-hermes-remote> server # [ 5.121948] systemd[1]: Mounting Huge Pages File System... vm-test-run-hermes-remote> server # [ 5.123781] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-hermes-remote> server # [ 5.133939] systemd[1]: Mounting Kernel Debug File System... vm-test-run-hermes-remote> server # [ 5.135810] systemd[1]: Mounting Kernel Trace File System... vm-test-run-hermes-remote> server # [ 5.138008] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 5.140653] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 5.141663] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm vm-test-run-hermes-remote> server # [ 5.143309] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> server # [ 5.145256] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> server # [ 5.148385] systemd[1]: Mounting FUSE Control File System... vm-test-run-hermes-remote> client # [ 5.036500] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-hermes-remote> client # [ 5.038597] systemd[1]: Reached target First Boot Complete. vm-test-run-hermes-remote> server # [ 5.149433] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> server # [ 5.156648] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> client # [ 5.221047] systemd-journald[299]: Received client request to flush runtime journal. vm-test-run-hermes-remote> server # [ 5.158811] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> server # [ 5.161272] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-hermes-remote> server # [ 5.164342] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-hermes-remote> server # [ 5.165437] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 5.167907] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 5.170398] systemd[1]: Listening on Journal Log Access Socket. vm-test-run-hermes-remote> server # [ 5.171517] systemd[1]: Mounted Huge Pages File System. vm-test-run-hermes-remote> server # [ 5.172578] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-hermes-remote> server # [ 5.173738] systemd[1]: Mounted Kernel Debug File System. vm-test-run-hermes-remote> server # [ 5.174751] systemd[1]: Mounted Kernel Trace File System. vm-test-run-hermes-remote> server # [ 5.176268] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 5.177595] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 5.179178] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 5.180438] systemd[1]: Mounted FUSE Control File System. vm-test-run-hermes-remote> server # [ 5.181168] EXT4-fs (vda): re-mounted febd8d48-828a-4af2-960f-2952144934fb. vm-test-run-hermes-remote> server # [ 5.183003] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-hermes-remote> server # [ 5.183488] systemd-journald[330]: Collecting audit messages is enabled. vm-test-run-hermes-remote> server # [ 5.185089] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 5.187543] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-hermes-remote> server # [ 5.188910] systemd[1]: Listening on Disk Image Download Service Socket. vm-test-run-hermes-remote> server # [ 5.190074] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> server # [ 5.194227] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-hermes-remote> server # [ 5.195224] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 5.197584] loop: module loaded vm-test-run-hermes-remote> server # [ 5.198341] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> server # [ 5.012156] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-hermes-remote> server # [ 5.013499] systemd[1]: systemd-journald.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 5.014955] systemd-modules-load[331]: Using 4 probe threads vm-test-run-hermes-remote> server # [ 5.016524] systemd-modules-load[331]: Inserted module 'tap' vm-test-run-hermes-remote> server # [ 5.017672] systemd-modules-load[331]: Inserted module 'loop' vm-test-run-hermes-remote> client # [ 5.096441] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 5.024095] systemd-modules-load[331]: Inserted module 'vhost_vsock' vm-test-run-hermes-remote> client # [ 5.100231] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-hermes-remote> server # [ 5.214310] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-hermes-remote> client # [ 5.103472] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 5.028881] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-hermes-remote> server # [ 5.030809] systemd-modules-load[331]: Inserted module 'vhost_net' vm-test-run-hermes-remote> server # [ 5.033737] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> client # [ 5.110687] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 5.036853] systemd-oomd[332]: No swap; memory pressure usage will be degraded vm-test-run-hermes-remote> server # [ 5.040845] systemd[1]: Starting Firewall... vm-test-run-hermes-remote> client # [ 5.116422] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 5.043713] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 5.044750] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-hermes-remote> server # [ 5.046105] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-hermes-remote> server # [ 5.047326] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-hermes-remote> server # [ 5.048413] systemd[1]: Reached target First Boot Complete. vm-test-run-hermes-remote> server # [ 5.241629] systemd-journald[330]: Received client request to flush runtime journal. vm-test-run-hermes-remote> client # [ 5.149615] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 5.151751] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> client # [ 5.153434] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 5.108322] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 5.111162] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> client # [ 5.186409] systemd-udevd[345]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> server # [ 5.112537] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 5.113432] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 5.114516] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 5.115651] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 5.116910] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-hermes-remote> server # [ 5.125815] systemd-udevd[365]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> server # [ 5.129835] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 5.220171] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 5.155384] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 5.234227] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> client # [ 5.317965] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> server # [ 5.259825] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. vm-test-run-hermes-remote> server # [ 5.263755] (udev-worker)[420]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> server # [ 5.269884] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. vm-test-run-hermes-remote> server # [ 5.271298] (udev-worker)[426]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> server # [ 5.273834] (udev-worker)[426]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 5.353061] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. vm-test-run-hermes-remote> client # [ 5.360539] (udev-worker)[392]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> server # [ 5.288976] systemd[1]: Condition check resulted in Virtio network device being skipped. vm-test-run-hermes-remote> server # [ 5.290370] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> server # [ 5.292110] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> server # [ 5.294704] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> server # [ 5.296567] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 5.298138] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 5.373336] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. vm-test-run-hermes-remote> client # [ 5.375262] (udev-worker)[403]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> client # [ 5.377742] (udev-worker)[403]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> server # [ 5.500381] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console vm-test-run-hermes-remote> server # [ 5.501997] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:06.0/virtio4/input/input3 vm-test-run-hermes-remote> server # [ 5.511286] Console: switching to colour dummy device 80x25 vm-test-run-hermes-remote> server # [ 5.512098] [drm] Found bochs VGA, ID 0xb0c5. vm-test-run-hermes-remote> server # [ 5.512877] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. vm-test-run-hermes-remote> server # [ 5.513985] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic vm-test-run-hermes-remote> server # [ 5.515017] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 vm-test-run-hermes-remote> client # [ 5.407304] systemd[1]: Condition check resulted in Virtio network device being skipped. vm-test-run-hermes-remote> client # [ 5.409370] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> client # [ 5.411510] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> client # [ 5.415356] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> server # [ 5.525609] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 vm-test-run-hermes-remote> server # [ 5.527280] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized vm-test-run-hermes-remote> client # [ 5.417503] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 5.528595] Console: switching to colour frame buffer device 160x50 vm-test-run-hermes-remote> server # [ 5.531859] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device vm-test-run-hermes-remote> client # [ 5.419521] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 5.533176] ACPI: button: Power Button [PWRF] vm-test-run-hermes-remote> server # [ 5.539080] mousedev: PS/2 mouse device common for all mice vm-test-run-hermes-remote> server # [ 5.553520] rtc_cmos PNP0B00:00: RTC can wake from S4 vm-test-run-hermes-remote> server # [ 5.555178] rtc_cmos PNP0B00:00: registered as rtc0 vm-test-run-hermes-remote> server # [ 5.555860] rtc_cmos PNP0B00:00: setting system clock to 2026-09-25T16:05:13 UTC (1790352313) vm-test-run-hermes-remote> server # [ 5.557038] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs vm-test-run-hermes-remote> server # [ 5.571926] parport_pc 00:02: reported by Plug and Play ACPI vm-test-run-hermes-remote> server # [ 5.573581] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] vm-test-run-hermes-remote> server # [ 5.578523] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt vm-test-run-hermes-remote> server # [ 5.579583] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD vm-test-run-hermes-remote> server # [ 5.580803] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 vm-test-run-hermes-remote> client # [ 5.645690] mousedev: PS/2 mouse device common for all mice vm-test-run-hermes-remote> server # [ 5.582320] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 vm-test-run-hermes-remote> client # [ 5.648936] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 vm-test-run-hermes-remote> client # [ 5.654476] ACPI: button: Power Button [PWRF] vm-test-run-hermes-remote> client # [ 5.664064] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console vm-test-run-hermes-remote> client # [ 5.500414] systemd[1]: Finished Firewall. vm-test-run-hermes-remote> server # [ 5.430364] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 5.686947] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:06.0/virtio4/input/input4 vm-test-run-hermes-remote> client # [ 5.688162] Console: switching to colour dummy device 80x25 vm-test-run-hermes-remote> client # [ 5.690334] [drm] Found bochs VGA, ID 0xb0c5. vm-test-run-hermes-remote> client # [ 5.690335] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. vm-test-run-hermes-remote> client # [ 5.692481] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic vm-test-run-hermes-remote> client # [ 5.693457] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 vm-test-run-hermes-remote> client # [ 5.694805] rtc_cmos PNP0B00:00: RTC can wake from S4 vm-test-run-hermes-remote> client # [ 5.700099] rtc_cmos PNP0B00:00: registered as rtc0 vm-test-run-hermes-remote> client # [ 5.700244] rtc_cmos PNP0B00:00: setting system clock to 2026-09-25T16:05:13 UTC (1790352313) vm-test-run-hermes-remote> client # [ 5.700372] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs vm-test-run-hermes-remote> server # [ 5.454094] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 5.702998] Console: switching to colour frame buffer device 160x50 vm-test-run-hermes-remote> server # [ 5.455481] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> client # [ 5.707944] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device vm-test-run-hermes-remote> server # [ 5.456480] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 5.712914] parport_pc 00:02: reported by Plug and Play ACPI vm-test-run-hermes-remote> client # [ 5.720050] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] vm-test-run-hermes-remote> client # [ 5.722928] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized vm-test-run-hermes-remote> server # [ 5.471567] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 5.472778] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 5.663314] ppdev: user-space parallel port driver vm-test-run-hermes-remote> server # [ 5.477580] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 5.669173] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) vm-test-run-hermes-remote> server # [ 5.670509] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0) vm-test-run-hermes-remote> server # [ 5.685476] kvm_amd: TSC scaling supported vm-test-run-hermes-remote> server # [ 5.685980] kvm_amd: Nested Virtualization enabled vm-test-run-hermes-remote> server # [ 5.686647] kvm_amd: Nested Paging enabled vm-test-run-hermes-remote> server # [ 5.687224] kvm_amd: LBR virtualization supported vm-test-run-hermes-remote> server # [ 5.687793] kvm_amd: Virtual GIF supported vm-test-run-hermes-remote> server # [ 5.687794] kvm_amd: Virtual NMI enabled vm-test-run-hermes-remote> client # [ 5.753513] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 vm-test-run-hermes-remote> client # [ 5.755434] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 vm-test-run-hermes-remote> client # [ 5.765444] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt vm-test-run-hermes-remote> client # [ 5.766281] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD vm-test-run-hermes-remote> client # [ 5.613739] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 5.621702] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 5.623702] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> client # [ 5.626795] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 5.754473] EDAC MC: Ver: 3.0.0 vm-test-run-hermes-remote> client # [ 5.663099] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 5.664433] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 5.600580] systemd[1]: Finished Firewall. vm-test-run-hermes-remote> client # [ 5.690059] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 5.617316] systemd-vconsole-setup[477]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> server # [ 5.619318] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> client # [ 5.872393] ppdev: user-space parallel port driver vm-test-run-hermes-remote> client # [ 5.878668] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) vm-test-run-hermes-remote> client # [ 5.880431] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) vm-test-run-hermes-remote> client # [ 5.898727] kvm_amd: TSC scaling supported vm-test-run-hermes-remote> client # [ 5.899305] kvm_amd: Nested Virtualization enabled vm-test-run-hermes-remote> client # [ 5.899867] kvm_amd: Nested Paging enabled vm-test-run-hermes-remote> client # [ 5.900443] kvm_amd: LBR virtualization supported vm-test-run-hermes-remote> client # [ 5.901008] kvm_amd: Virtual GIF supported vm-test-run-hermes-remote> client # [ 5.901564] kvm_amd: Virtual NMI enabled vm-test-run-hermes-remote> client # [ 5.937829] EDAC MC: Ver: 3.0.0 vm-test-run-hermes-remote> client # [ 5.804530] systemd-vconsole-setup[462]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> client # [ 5.807462] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> client # [ 5.809428] systemd[1]: Mounting /run/wrappers... vm-test-run-hermes-remote> client # [ 5.833958] systemd[1]: Mounted /run/wrappers. vm-test-run-hermes-remote> client # [ 5.835062] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> client # [ 5.836669] systemd[1]: Listening on Boot Loader Control Service Socket. vm-test-run-hermes-remote> client # [ 5.839079] systemd[1]: Starting register-nix-paths.service... vm-test-run-hermes-remote> client # [ 5.840175] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-hermes-remote> client # [ 5.842028] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-hermes-remote> client # [ 5.843495] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-hermes-remote> client # [ 5.856227] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 5.884051] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-hermes-remote> client # [ 5.885837] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-hermes-remote> client # [ 5.914372] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> client # [ 5.918081] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-hermes-remote> client # [ 5.919398] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-hermes-remote> client # [ 5.942593] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-hermes-remote> server # [ 5.881376] systemd[1]: Mounting /run/wrappers... vm-test-run-hermes-remote> client # [ 5.962202] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-hermes-remote> client # [ 5.963304] systemd[1]: Starting Update is Completed... vm-test-run-hermes-remote> server # [ 5.898774] systemd[1]: Mounted /run/wrappers. vm-test-run-hermes-remote> server # [ 5.899734] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> server # [ 5.900790] systemd[1]: Listening on Boot Loader Control Service Socket. vm-test-run-hermes-remote> server # [ 5.901952] systemd[1]: Starting register-nix-paths.service... vm-test-run-hermes-remote> server # [ 5.903263] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-hermes-remote> server # [ 5.904255] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-hermes-remote> server # [ 5.905810] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-hermes-remote> server # [ 5.906956] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 5.986412] systemd[1]: Finished Update is Completed. vm-test-run-hermes-remote> server # [ 5.934244] systemd-tmpfiles[517]: /etc/tmpfiles.d/10-microvm.conf:1: Duplicate line for path "/home/alice/hermes", ignoring. vm-test-run-hermes-remote> server # [ 5.936526] systemd-tmpfiles[517]: /etc/tmpfiles.d/10-microvm.conf:2: Duplicate line for path "/var/lib/hermes-microvm/alice/guest", ignoring. vm-test-run-hermes-remote> server # [ 5.938799] systemd-tmpfiles[517]: /etc/tmpfiles.d/10-microvm.conf:3: Duplicate line for path "/var/lib/hermes-microvm/alice/state-vault/state", ignoring. vm-test-run-hermes-remote> server # [ 5.940978] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-hermes-remote> server # [ 5.943388] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-hermes-remote> server # [ 5.954824] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 5.956661] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-hermes-remote> server # [ 5.958470] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-hermes-remote> server # [ 5.975187] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-hermes-remote> server # [ 5.984466] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-hermes-remote> server # [ 5.985745] systemd[1]: Starting Update is Completed... vm-test-run-hermes-remote> server # [ 6.007774] systemd[1]: Finished Update is Completed. vm-test-run-hermes-remote> client # [ 6.114375] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 6.116137] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-hermes-remote> server # [ 6.087457] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 6.089492] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-hermes-remote> client # [ 6.178676] systemd[1]: Finished register-nix-paths.service. vm-test-run-hermes-remote> client # [ 6.179915] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> client # [ 6.181134] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-hermes-remote> client # [ 6.182300] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-hermes-remote> client # [ 6.183358] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> client # [ 6.184337] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 6.185369] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-hermes-remote> client # [ 6.186351] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. vm-test-run-hermes-remote> client # [ 6.187711] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> client # [ 6.188557] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> client # [ 6.190316] systemd[1]: Started backdoor.service. vm-test-run-hermes-remote> client # [ 6.191357] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-hermes-remote> client # [ 6.192816] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> client # [ 6.197298] systemd[1]: Starting Post-Boot Actions... vm-test-run-hermes-remote> client # [ 6.200286] systemd[1]: Started Reset console on configuration changes. vm-test-run-hermes-remote> client # [ 6.205283] systemd[1]: Starting resolvconf update... vm-test-run-hermes-remote> client # [ 6.215927] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-hermes-remote> server # [ 6.166312] systemd[1]: Finished register-nix-paths.service. vm-test-run-hermes-remote> server # [ 6.167584] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> server # [ 6.168589] systemd[1]: Started hermes-microvm-timezone.path. vm-test-run-hermes-remote> client # [ 6.241912] nsncd[543]: Sep 25 16:05:14.218 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> client # [ 6.244477] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 6.169817] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-hermes-remote> server # [ 6.171037] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-hermes-remote> client # [ 6.245725] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 6.172200] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> client # connecting to host... vm-test-run-hermes-remote> server # [ 6.173109] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> client # [ 6.248390] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 6.174075] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 6.249632] systemd[1]: Starting User Login Management... vm-test-run-hermes-remote> client # [ 6.252130] systemd[1]: Finished Post-Boot Actions. vm-test-run-hermes-remote> client # [ 6.254534] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-hermes-remote> server # [ 6.187518] systemd[1]: Listening on dashboard forward socket for alice. vm-test-run-hermes-remote> server # [ 6.188710] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-hermes-remote> server # [ 6.189616] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-hermes-remote> server # [ 6.191064] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. vm-test-run-hermes-remote> server # [ 6.192627] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> server # [ 6.193517] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 6.194393] systemd[1]: Started backdoor.service. vm-test-run-hermes-remote> server # [ 6.195264] systemd[1]: Started Enable Kernel Same-Page Merging. vm-test-run-hermes-remote> server # [ 6.196277] systemd[1]: Starting Owner-match loopback firewall for hermes microvms... vm-test-run-hermes-remote> server # [ 6.197605] systemd[1]: Starting Install MicroVM 'hermes-alice'... vm-test-run-hermes-remote> server # [ 6.198754] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-hermes-remote> client # [ 6.273989] dbus-broker-launch[548]: Looking up NSS user entry for 'systemd-timesync'... vm-test-run-hermes-remote> server # [ 6.199956] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 6.201113] systemd[1]: Starting Post-Boot Actions... vm-test-run-hermes-remote> server # [ 6.202046] systemd[1]: Started Reset console on configuration changes. vm-test-run-hermes-remote> server # [ 6.207357] systemd[1]: Starting resolvconf update... vm-test-run-hermes-remote> client # [ 6.282068] dbus-broker-launch[548]: NSS returned no entry for 'systemd-timesync' vm-test-run-hermes-remote> server # [ 6.211411] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-hermes-remote> client # [ 6.284730] dbus-broker-launch[548]: Invalid user-name in /nix/store/ba4rgx4ly8my5snvkmdbh74j71z5ld79-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" vm-test-run-hermes-remote> client # [ 6.288331] systemd[1]: Started D-Bus System Message Bus. vm-test-run-hermes-remote> client # [ 6.298612] systemd-logind[564]: New seat seat0. vm-test-run-hermes-remote> client # [ 6.304699] systemd-logind[564]: Watching system buttons on /dev/input/event2 (Power Button) vm-test-run-hermes-remote> client # [ 6.305671] systemd-logind[564]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-hermes-remote> client # [ 6.306517] systemd-logind[564]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) vm-test-run-hermes-remote> server # [ 6.233887] systemd[1]: enable-ksm.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 6.236126] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 6.311277] systemd[1]: Started User Login Management. vm-test-run-hermes-remote> server # [ 6.237578] nsncd[599]: Sep 25 16:05:14.365 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> client # [ 6.314349] dbus-broker-launch[548]: Ready vm-test-run-hermes-remote> server # [ 6.240691] systemd[1]: Finished Post-Boot Actions. vm-test-run-hermes-remote> client # [ 6.315632] systemd[1]: Starting linger-users.service... vm-test-run-hermes-remote> server # [ 6.241948] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 6.243105] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # connecting to host... vm-test-run-hermes-remote> server # [ 6.246906] systemd[1]: Starting User Login Management... vm-test-run-hermes-remote> server # [ 6.250786] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-hermes-remote> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-hermes-remote> server # [ 6.253982] dbus-broker-launch[604]: Looking up NSS user entry for 'systemd-timesync'... vm-test-run-hermes-remote> server # [ 6.256575] dbus-broker-launch[604]: NSS returned no entry for 'systemd-timesync' vm-test-run-hermes-remote> client # [ 6.329977] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 6.257292] dbus-broker-launch[604]: Invalid user-name in /nix/store/g238plmfd986r6amsfh0p6sm1cy0k3j0-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" vm-test-run-hermes-remote> client # [ 6.331397] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-hermes-remote> server # [ 6.264843] systemd[1]: install-microvm-hermes-alice.service: Deactivated successfully. vm-test-run-hermes-remote> server: connected to guest root shell vm-test-run-hermes-remote> server # [ 6.265684] systemd[1]: Finished Install MicroVM 'hermes-alice'. vm-test-run-hermes-remote> server: (connecting took 6.93 seconds) vm-test-run-hermes-remote> server # [ 6.267459] systemd[1]: Started D-Bus System Message Bus. vm-test-run-hermes-remote> client # [ 6.332417] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 6.269379] systemd[1]: Setup MicroVM 'hermes-alice' devices for passthrough skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/pci-setup vm-test-run-hermes-remote> server: (finished: waiting for the VM to finish booting, in 6.93 seconds) vm-test-run-hermes-remote> client # [ 6.333462] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-hermes-remote> client # [ 6.334948] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> client # [ 6.336881] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 6.338703] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 6.342300] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 6.274519] systemd[1]: Starting Save MicroVM 'hermes-alice' booted configuration... vm-test-run-hermes-remote> server # [ 6.278067] dbus-broker-launch[604]: Ready vm-test-run-hermes-remote> client # [ 6.354453] systemd[1]: Created slice Slice /user/1000. vm-test-run-hermes-remote> client # [ 6.357510] systemd[1]: Starting User Runtime Directory /run/user/1000... vm-test-run-hermes-remote> server # [ 6.292573] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 6.294516] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-hermes-remote> client # [ 6.368552] nsncd[618]: Sep 25 16:05:14.344 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> server # [ 6.295939] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 6.296717] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-hermes-remote> server # [ 6.297710] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 6.299584] systemd-logind[629]: New seat seat0. vm-test-run-hermes-remote> client # [ 6.374967] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 6.300855] systemd-logind[629]: Watching system buttons on /dev/input/event3 (Power Button) vm-test-run-hermes-remote> client # [ 6.376896] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 6.378506] systemd[1]: Finished linger-users.service. vm-test-run-hermes-remote> server # [ 6.304351] systemd-logind[629]: Watching system buttons on /dev/input/event2 (QEMU Virtio Keyboard) vm-test-run-hermes-remote> server # [ 6.305104] systemd-logind[629]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) vm-test-run-hermes-remote> server # [ 6.305655] systemd[1]: Started User Login Management. vm-test-run-hermes-remote> server # [ 6.306290] systemd[1]: Starting linger-users.service... vm-test-run-hermes-remote> server # [ 6.306849] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 6.383343] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 6.307809] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 6.384436] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 6.315836] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> client # [ 6.390970] systemd[1]: Finished User Runtime Directory /run/user/1000. vm-test-run-hermes-remote> client # [ 6.394719] systemd[1]: Starting User Manager for UID 1000... vm-test-run-hermes-remote> client # [ 6.397837] systemd[1]: Finished resolvconf update. vm-test-run-hermes-remote> client # [ 6.398575] systemd[1]: Reached target Preparation for Network. vm-test-run-hermes-remote> client # [ 6.401212] systemd[1]: Starting DHCP Client... vm-test-run-hermes-remote> client # [ 6.404100] systemd[1]: Starting Address configuration of eth1... vm-test-run-hermes-remote> client # [ 6.406096] systemd[1]: Starting Extra networking commands.... vm-test-run-hermes-remote> server # [ 6.331747] nsncd[702]: Sep 25 16:05:14.462 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> server # [ 6.335479] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 6.336276] systemd[1]: Finished Owner-match loopback firewall for hermes microvms. vm-test-run-hermes-remote> server # [ 6.337557] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 6.340748] systemd[1]: Finished linger-users.service. vm-test-run-hermes-remote> server # [ 6.344513] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 6.345309] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 6.349750] systemd[1]: Finished resolvconf update. vm-test-run-hermes-remote> server # [ 6.350598] systemd[1]: Reached target Preparation for Network. vm-test-run-hermes-remote> server # [ 6.352092] systemd[1]: Starting DHCP Client... vm-test-run-hermes-remote> server # [ 6.353460] systemd[1]: Starting Address configuration of eth1... vm-test-run-hermes-remote> client # [ 6.429151] (systemd)[645]: pam_unix(systemd-user:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 6.355485] systemd[1]: Starting Extra networking commands.... vm-test-run-hermes-remote> client # [ 6.439166] systemd-logind[564]: New session '1' of user 'alice' with class 'manager' and type 'unspecified'. vm-test-run-hermes-remote> server # [ 6.374341] systemd[1]: Finished Save MicroVM 'hermes-alice' booted configuration. vm-test-run-hermes-remote> server # [ 6.375787] systemd[1]: Setup MicroVM 'hermes-alice' MACVTAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/macvtap-up vm-test-run-hermes-remote> server # [ 6.378579] systemd[1]: Starting VirtioFS daemons for MicroVM 'hermes-alice'... vm-test-run-hermes-remote> client # [ 6.462494] network-addresses-eth1-start[648]: adding address 192.168.1.1/24... done vm-test-run-hermes-remote> client # [ 6.463536] systemd[645]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> server # [ 6.398944] network-addresses-eth1-start[734]: adding address 192.168.1.2/24... done vm-test-run-hermes-remote> client # [ 6.478372] network-addresses-eth1-start[648]: adding address 2001:db8:1::1/64... done vm-test-run-hermes-remote> server # [ 6.404940] network-addresses-eth1-start[734]: adding address 2001:db8:1::2/64... done vm-test-run-hermes-remote> client # [ 6.484982] systemd[1]: Finished Address configuration of eth1. vm-test-run-hermes-remote> server # [ 6.412859] systemd[1]: Finished Address configuration of eth1. vm-test-run-hermes-remote> server # [ 6.428516] dhcpcd[745]: dhcpcd-10.3.2 starting vm-test-run-hermes-remote> server # [ 6.432561] dhcpcd[806]: dev: loaded udev vm-test-run-hermes-remote> client # [ 6.512066] dhcpcd[658]: dhcpcd-10.3.2 starting vm-test-run-hermes-remote> server # [ 6.438216] systemd[1]: Finished Extra networking commands.. vm-test-run-hermes-remote> server # [ 6.626899] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-hermes-remote> client # [ 6.515326] dhcpcd[713]: dev: loaded udev vm-test-run-hermes-remote> server # [ 6.440360] systemd[1]: Reach[ 6.627708] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-hermes-remote> server # ed target Network. vm-test-run-hermes-remote> server # [ 6.442280] systemd[1]: Setup MicroVM 'hermes-alice' TAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/tap-up vm-test-run-hermes-remote> server # [ 6.446520] systemd[1]: Starting SSH Daemon... vm-test-run-hermes-remote> server # [ 6.447674] systemd[1]: Starting Permit User Sessions... vm-test-run-hermes-remote> client # [ 6.700657] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-hermes-remote> client # [ 6.701305] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-hermes-remote> client # [ 6.530249] systemd[1]: Finished Extra networking commands.. vm-test-run-hermes-remote> client # [ 6.532331] systemd[1]: Reached target Network. vm-test-run-hermes-remote> client # [ 6.534394] systemd[1]: Starting Permit User Sessions... vm-test-run-hermes-remote> server # [ 6.461069] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-hermes-remote> client # [ 6.560071] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-hermes-remote> server # [ 6.513898] systemd[1]: Finished Permit User Sessions. vm-test-run-hermes-remote> server # [ 6.517461] systemd[1]: Started Getty on tty1. vm-test-run-hermes-remote> server # [ 6.518232] systemd[1]: Reached target Login Prompts. vm-test-run-hermes-remote> client # [ 6.772000] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-hermes-remote> client # [ 6.604321] systemd[1]: Finished Permit User Sessions. vm-test-run-hermes-remote> server # [ 6.718186] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-hermes-remote> client # [ 6.783929] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-hermes-remote> client # [ 6.785003] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-hermes-remote> client # [ 6.608797] systemd[1]: Started Getty on tty1. vm-test-run-hermes-remote> client # [ 6.610288] s[ 6.787224] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 vm-test-run-hermes-remote> client # ystemd[1]: Reached target Login [ 6.788684] cfg80211: failed to load regulatory.db vm-test-run-hermes-remote> client # Prompts. vm-test-run-hermes-remote> server # [ 6.542140] sshd[818]: Server listening on 0.0.0.0 port 22. vm-test-run-hermes-remote> server # [ 6.543207] sshd[818]: Server listening on :: port 22. vm-test-run-hermes-remote> server # [ 6.544181] systemd[1]: Started SSH Daemon. vm-test-run-hermes-remote> server # [ 6.737293] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-hermes-remote> server # [ 6.738332] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-hermes-remote> server # [ 6.740396] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 vm-test-run-hermes-remote> server # [ 6.741623] cfg80211: failed to load regulatory.db vm-test-run-hermes-remote> client # [ 6.634267] systemd[645]: Queued start job for default target Main User Target. vm-test-run-hermes-remote> client # [ 6.638035] systemd[645]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> client # [ 6.641080] systemd[645]: Created slice User Application Slice. vm-test-run-hermes-remote> client # [ 6.641892] systemd[645]: Started Daily Cleanup of User's Temporary Directories. vm-test-run-hermes-remote> client # [ 6.642691] systemd[645]: Reached target Paths. vm-test-run-hermes-remote> client # [ 6.644306] systemd[645]: Reached target Timers. vm-test-run-hermes-remote> client # [ 6.645333] systemd[645]: Starting D-Bus User Message Bus Socket... vm-test-run-hermes-remote> client # [ 6.648120] s[ 6.825130] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-hermes-remote> client # ystemd[645]: Starting Create User Files and Directories... vm-test-run-hermes-remote> client # [ 6.650243] dhcpcd[713]: eth0: waiting for carrier vm-test-run-hermes-remote> client # [ 6.653165] dhcpcd[713]: eth0: carrier acquired vm-test-run-hermes-remote> server # [ 6.766231] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-hermes-remote> server # [ 6.580279] dhcpcd[806]: eth0: waiting for carrier vm-test-run-hermes-remote> server # [ 6.581218] dhcpcd[806]: eth0: carrier acquired vm-test-run-hermes-remote> client # [ 6.657247] dhcpcd[713]: DUID 00:01:00:01:32:49:58:3a:52:54:00:12:34:56 vm-test-run-hermes-remote> client # [ 6.658439] dhcpcd[713]: eth0: IAID 00:12:34:56 vm-test-run-hermes-remote> server # [ 6.583853] dhcpcd[806]: DUID 00:01:00:01:32:49:58:3a:52:54:00:12:34:56 vm-test-run-hermes-remote> server # [ 6.584965] dhcpcd[806]: eth0: IAID 00:12:34:56 vm-test-run-hermes-remote> client # [ 6.659460] dhcpcd[713]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-hermes-remote> server # [ 6.585841] dhcpcd[806]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-hermes-remote> client # [ 6.678095] systemd[645]: Listening on D-Bus User Message Bus Socket. vm-test-run-hermes-remote> client # [ 6.679216] systemd[645]: Reached target Sockets. vm-test-run-hermes-remote> client # [ 6.681489] systemd[645]: Finished Create User Files and Directories. vm-test-run-hermes-remote> client # [ 6.682588] systemd[645]: Reached target Basic System. vm-test-run-hermes-remote> client # [ 6.683500] systemd[1]: Started User Manager for UID 1000. vm-test-run-hermes-remote> client # [ 6.684456] systemd[645]: Starting Run user-specific NixOS activation... vm-test-run-hermes-remote> client # [ 6.699579] systemd[645]: Finished Run user-specific NixOS activation. vm-test-run-hermes-remote> client # [ 6.700862] systemd[645]: Reached target Main User Target. vm-test-run-hermes-remote> client # [ 6.702034] systemd[645]: Startup finished in 244ms. vm-test-run-hermes-remote> client # [ 6.762792] dhcpcd[713]: eth0: soliciting a DHCP lease vm-test-run-hermes-remote> client # [ 6.945801] NET: Registered PF_PACKET protocol family vm-test-run-hermes-remote> client # [ 6.775392] dhcpcd[713]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-hermes-remote> client # [ 6.780198] dhcpcd[713]: eth0: probing address 10.0.2.15/24 vm-test-run-hermes-remote> server # [ 6.738628] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:14,869 INFO Set uid to user 0 succeeded vm-test-run-hermes-remote> server # [ 6.740563] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:14,871 INFO supervisord started with pid 815 vm-test-run-hermes-remote> server # [ 7.743842] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:15,874 INFO spawned: 'notify' with pid 842 vm-test-run-hermes-remote> server # [ 7.746188] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:15,877 INFO spawned: 'virtiofsd-hermes-exchange' with pid 843 vm-test-run-hermes-remote> server # [ 7.748246] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:15,879 INFO spawned: 'virtiofsd-hermes-state' with pid 844 vm-test-run-hermes-remote> server # [ 7.750452] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:15,881 INFO spawned: 'virtiofsd-host-config' with pid 845 vm-test-run-hermes-remote> server # [ 7.753438] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:15,884 INFO spawned: 'virtiofsd-ro-store' with pid 846 vm-test-run-hermes-remote> server # [ 7.778076] supervisord[815]: virtiofsd-host-config [2026-09-25T16:05:15Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 7.778837] supervisord[815]: virtiofsd-hermes-exchange [2026-09-25T16:05:15Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 7.779614] supervisord[815]: virtiofsd-ro-store [2026-09-25T16:05:15Z WARN virtiofsd::passthrough] Filesystem mounted on "/" (mount ID: 366): Filesystem does not support file handles, falling back to O_PATH FDs vm-test-run-hermes-remote> server # [ 7.780221] supervisord[815]: virtiofsd-ro-store [2026-09-25T16:05:15Z WARN virtiofsd::passthrough] Failed to generate a file handle for the root node, disabling file handles altogether vm-test-run-hermes-remote> server # [ 7.780799] supervisord[815]: virtiofsd-ro-store [2026-09-25T16:05:15Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 7.789579] supervisord[815]: virtiofsd-hermes-state [2026-09-25T16:05:15Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 7.992333] dhcpcd[806]: eth0: soliciting a DHCP lease vm-test-run-hermes-remote> server # [ 8.188350] NET: Registered PF_PACKET protocol family vm-test-run-hermes-remote> server # [ 8.012340] dhcpcd[806]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-hermes-remote> server # [ 8.020313] dhcpcd[806]: eth0: probing address 10.0.2.15/24 vm-test-run-hermes-remote> client # [ 8.687228] dhcpcd[713]: eth0: soliciting an IPv6 router vm-test-run-hermes-remote> client # [ 8.688304] dhcpcd[713]: eth0: Router Advertisement from fe80::2 vm-test-run-hermes-remote> client # [ 8.689384] dhcpcd[713]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-hermes-remote> client # [ 8.690596] dhcpcd[713]: eth0: adding route to fec0::/64 vm-test-run-hermes-remote> client # [ 8.691655] dhcpcd[713]: eth0: adding default route via fe80::2 vm-test-run-hermes-remote> server # [ 8.793852] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:16,924 INFO success: notify entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 8.794882] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:16,924 INFO success: virtiofsd-hermes-exchange entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 8.795460] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:16,925 INFO success: virtiofsd-hermes-state entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 8.796242] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:16,925 INFO success: virtiofsd-host-config entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 8.796837] microvm-virtiofsd@hermes-alice[815]: 2026-09-25 16:05:16,925 INFO success: virtiofsd-ro-store entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 8.807977] systemd[1]: Started VirtioFS daemons for MicroVM 'hermes-alice'. vm-test-run-hermes-remote> server # [ 8.810610] systemd[1]: Starting MicroVM 'hermes-alice'... vm-test-run-hermes-remote> server # [ 8.833615] dhcpcd[806]: eth0: soliciting an IPv6 router vm-test-run-hermes-remote> server # [ 8.834548] dhcpcd[806]: eth0: Router Advertisement from fe80::2 vm-test-run-hermes-remote> server # [ 8.835298] dhcpcd[806]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-hermes-remote> server # [ 8.835700] dhcpcd[806]: eth0: adding route to fec0::/64 vm-test-run-hermes-remote> server # [ 8.836442] dhcpcd[806]: eth0: adding default route via fe80::2 vm-test-run-hermes-remote> server # [ 8.920754] systemd[1]: Started MicroVM 'hermes-alice'. vm-test-run-hermes-remote> server # [ 8.921706] systemd[1]: Reached target microvms.target. vm-test-run-hermes-remote> server # [ 9.052859] supervisord[815]: virtiofsd-hermes-exchange [2026-09-25T16:05:17Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 9.053830] microvm@hermes-alice[916]: microvm@hermes-alice: warning: Number of SMP cpus requested (8) exceeds the recommended cpus supported by KVM (4) vm-test-run-hermes-remote> server # [ 9.073310] microvm@hermes-alice[916]: microvm@hermes-alice: warning: Number of hotpluggable cpus requested (8) exceeds the recommended cpus supported by KVM (4) vm-test-run-hermes-remote> server # [ 9.074302] supervisord[815]: virtiofsd-host-config [2026-09-25T16:05:17Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 9.074858] supervisord[815]: virtiofsd-ro-store [2026-09-25T16:05:17Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 9.075650] supervisord[815]: virtiofsd-hermes-state [2026-09-25T16:05:17Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 9.178528] microvm@hermes-alice[916]: SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-hermes-remote> server # [ 9.409975] microvm@hermes-alice[916]: Booting from ROM... vm-test-run-hermes-remote> server # [ 9.412985] microvm@hermes-alice[916]: PPrroobbiinngg EEDDDD ((eedddd==ooffff ttoo ddiissaabbllee))...... ook vm-test-run-hermes-remote> server # [ 9.614875] microvm@hermes-alice[916]: No EFI environment detected. vm-test-run-hermes-remote> server # [ 9.616986] microvm@hermes-alice[916]: early console in extract_kernel vm-test-run-hermes-remote> server # [ 9.618329] microvm@hermes-alice[916]: input_data: 0x0000000003abb2cc vm-test-run-hermes-remote> server # [ 9.619613] microvm@hermes-alice[916]: input_len: 0x0000000000cc60f4 vm-test-run-hermes-remote> server # [ 9.620782] microvm@hermes-alice[916]: output: 0x0000000001000000 vm-test-run-hermes-remote> server # [ 9.622109] microvm@hermes-alice[916]: output_len: 0x0000000003729e08 vm-test-run-hermes-remote> server # [ 9.623921] microvm@hermes-alice[916]: kernel_total_size: 0x0000000002e30000 vm-test-run-hermes-remote> server # [ 9.625406] microvm@hermes-alice[916]: needed_size: 0x0000000003800000 vm-test-run-hermes-remote> server # [ 9.626968] microvm@hermes-alice[916]: trampoline_32bit: 0x0000000000000000 vm-test-run-hermes-remote> server # [ 9.628679] microvm@hermes-alice[916]: Physical KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 9.630300] microvm@hermes-alice[916]: Virtual KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 9.630966] microvm@hermes-alice[916]: vm-test-run-hermes-remote> server # [ 9.632422] microvm@hermes-alice[916]: Decompressing Linux... No EFI environment detected. vm-test-run-hermes-remote> server # [ 10.156794] microvm@hermes-alice[916]: Parsing ELF... Performing relocations... done. vm-test-run-hermes-remote> server # [ 10.158704] microvm@hermes-alice[916]: Booting the kernel (entry_offset: 0x000000000278f560). vm-test-run-hermes-remote> server # [ 10.172788] microvm@hermes-alice[916]: [ 0.000000] Linux version 6.18.53 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 21 13:06:06 UTC 2026 vm-test-run-hermes-remote> server # [ 10.185121] microvm@hermes-alice[916]: [ 0.000000] Command line: earlyprintk=ttyS0 console=ttyS0 reboot=t panic=-1 8250.nr_uarts=1 8250.nr_uarts=1 root=fstab loglevel=4 lsm=landlock,yama,bpf init=/nix/store/d3qmmd91lj4kcnlcfyww46xzi1p1vd9n-nixos-system-hermes-alice-26.11pre-git/init regInfo=/nix/store/4w9ig95wzdrvbpyxqca1z8mcbr063dbp-closure-info/registration vm-test-run-hermes-remote> server # [ 10.186888] microvm@hermes-alice[916]: [ 0.000000] BIOS-provided physical RAM map: vm-test-run-hermes-remote> server # [ 10.189818] microvm@hermes-alice[916]: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-hermes-remote> server # [ 10.192803] microvm@hermes-alice[916]: [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-hermes-remote> server # [ 10.195819] microvm@hermes-alice[916]: [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-hermes-remote> server # [ 10.198730] microvm@hermes-alice[916]: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfffdfff] usable vm-test-run-hermes-remote> server # [ 10.201710] microvm@hermes-alice[916]: [ 0.000000] BIOS-e820: [mem 0x00000000bfffe000-0x00000000bfffffff] reserved vm-test-run-hermes-remote> server # [ 10.204684] microvm@hermes-alice[916]: [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-hermes-remote> server # [ 10.207695] microvm@hermes-alice[916]: [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-hermes-remote> server # [ 10.210616] microvm@hermes-alice[916]: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable vm-test-run-hermes-remote> server # [ 10.212954] microvm@hermes-alice[916]: [ 0.000000] printk: legacy bootconsole [earlyser0] enabled vm-test-run-hermes-remote> server # [ 10.217852] microvm@hermes-alice[916]: Memory KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> client # [ 11.827369] dhcpcd[713]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-hermes-remote> client # [ 11.828515] dhcpcd[713]: eth0: adding route to 10.0.2.0/24 vm-test-run-hermes-remote> client # [ 11.829470] dhcpcd[713]: eth0: adding default route via 10.0.2.2 vm-test-run-hermes-remote> client # [ 11.871820] systemd[1]: Started DHCP Client. vm-test-run-hermes-remote> client # [ 11.872670] systemd[1]: Reached target Multi-User System. vm-test-run-hermes-remote> client # [ 11.873632] systemd[1]: Startup finished in 786ms (kernel) + 3.172s (initrd) + 7.914s (userspace) = 11.873s. vm-test-run-hermes-remote> server # [ 12.103045] microvm@hermes-alice[916]: Poking KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 12.113610] dhcpcd[806]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-hermes-remote> server # [ 12.114725] dhcpcd[806]: eth0: adding route to 10.0.2.0/24 vm-test-run-hermes-remote> server # [ 12.115577] dhcpcd[806]: eth0: adding default route via 10.0.2.2 vm-test-run-hermes-remote> server # [ 12.162691] systemd[1]: Started DHCP Client. vm-test-run-hermes-remote> server # [ 12.163934] systemd[1]: Reached target Multi-User System. vm-test-run-hermes-remote> server # [ 12.165158] systemd[1]: Startup finished in 871ms (kernel) + 3.159s (initrd) + 8.133s (userspace) = 12.165s. vm-test-run-hermes-remote> server # [ 12.296721] microvm@hermes-alice[916]: [ 2.036862] PCI: Fatal: No config space access function found vm-test-run-hermes-remote> server: (finished: waiting for unit multi-user.target, in 13.18 seconds) vm-test-run-hermes-remote> server: waiting for unit sshd.service vm-test-run-hermes-remote> server: (finished: waiting for unit sshd.service, in 0.03 seconds) vm-test-run-hermes-remote> client: waiting for unit multi-user.target vm-test-run-hermes-remote> client: waiting for the VM to finish booting vm-test-run-hermes-remote> client: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-hermes-remote> client: connected to guest root shell vm-test-run-hermes-remote> client: (connecting took 0.00 seconds) vm-test-run-hermes-remote> client: (finished: waiting for the VM to finish booting, in 0.00 seconds) vm-test-run-hermes-remote> client: (finished: waiting for unit multi-user.target, in 0.03 seconds) vm-test-run-hermes-remote> client: must succeed: install -d -m 0755 /var/lib/hermes-identity vm-test-run-hermes-remote> client: (finished: must succeed: install -d -m 0755 /var/lib/hermes-identity, in 0.01 seconds) vm-test-run-hermes-remote> client: must succeed: install -m 0400 -o alice -g users /nix/store/36ldqrhq3c9f218rdz5s24r6kd7q6f9i-privkey.snakeoil /var/lib/hermes-identity/alice vm-test-run-hermes-remote> client: (finished: must succeed: install -m 0400 -o alice -g users /nix/store/36ldqrhq3c9f218rdz5s24r6kd7q6f9i-privkey.snakeoil /var/lib/hermes-identity/alice, in 0.01 seconds) vm-test-run-hermes-remote> client: must fail: test -e /home/alice/.ssh vm-test-run-hermes-remote> client: (finished: must fail: test -e /home/alice/.ssh, in 0.01 seconds) vm-test-run-hermes-remote> ??? Warning (UserWarning): wait_for_unit(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. vm-test-run-hermes-remote> File "/nix/store/sriy4r0q27j8r84xmfnwwzc7q3jqgm4m-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 vm-test-run-hermes-remote> server: waiting for unit microvm@hermes-alice.service vm-test-run-hermes-remote> server: (finished: waiting for unit microvm@hermes-alice.service, in 0.08 seconds) vm-test-run-hermes-remote> subtest: the token file mode is the whole ACL vm-test-run-hermes-remote> server: must succeed: stat -c '%U %a' /var/lib/hermes-microvm/alice/desktop-token vm-test-run-hermes-remote> server: (finished: must succeed: stat -c '%U %a' /var/lib/hermes-microvm/alice/desktop-token, in 0.02 seconds) vm-test-run-hermes-remote> (finished: subtest: the token file mode is the whole ACL, in 0.02 seconds) vm-test-run-hermes-remote> client: must succeed: id -u alice vm-test-run-hermes-remote> client: (finished: must succeed: id -u alice, in 0.01 seconds) vm-test-run-hermes-remote> client: waiting for unit user@1000.service vm-test-run-hermes-remote> client: (finished: waiting for unit user@1000.service, in 0.03 seconds) vm-test-run-hermes-remote> subtest: the launcher opens the tunnel and prints the remote env vm-test-run-hermes-remote> client: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 hermes-desktop-remote --print-env' vm-test-run-hermes-remote> client # [ 12.832803] su[825]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 12.838680] su[825]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 12.866243] systemd[645]: Starting SSH forward to the remote hermes dashboard... vm-test-run-hermes-remote> client # [ 12.887311] systemd[645]: Started SSH forward to the remote hermes dashboard. vm-test-run-hermes-remote> server # [ 12.922921] sshd-session[1038]: Accepted publickey for alice from 2001:db8:1::1 port 49366 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E vm-test-run-hermes-remote> server # [ 12.929450] sshd-session[1038]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 12.946224] systemd-logind[629]: New session '1' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 12.953771] systemd[1]: Created slice Slice /user/1000. vm-test-run-hermes-remote> server # [ 12.954952] systemd[1]: Starting User Runtime Directory /run/user/1000... vm-test-run-hermes-remote> server # [ 12.982319] systemd[1]: Finished User Runtime Directory /run/user/1000. vm-test-run-hermes-remote> server # [ 12.984700] systemd[1]: Starting User Manager for UID 1000... vm-test-run-hermes-remote> server # [ 13.011495] (systemd)[1045]: pam_unix(systemd-user:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 13.014431] systemd-logind[629]: New session '2' of user 'alice' with class 'manager' and type 'unspecified'. vm-test-run-hermes-remote> server # [ 13.033391] systemd[1045]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> server # [ 13.118867] systemd[1045]: Queued start job for default target Main User Target. vm-test-run-hermes-remote> server # [ 13.126822] systemd[1045]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> server # [ 13.128161] systemd[1045]: Created slice User Application Slice. vm-test-run-hermes-remote> server # [ 13.128981] systemd[1045]: Started Daily Cleanup of User's Temporary Directories. vm-test-run-hermes-remote> server # [ 13.130066] systemd[1045]: Reached target Paths. vm-test-run-hermes-remote> server # [ 13.130875] systemd[1045]: Reached target Timers. vm-test-run-hermes-remote> server # [ 13.132155] systemd[1045]: Starting D-Bus User Message Bus Socket... vm-test-run-hermes-remote> server # [ 13.133764] systemd[1045]: Starting Create User Files and Directories... vm-test-run-hermes-remote> server # [ 13.149911] systemd[1045]: Finished Create User Files and Directories. vm-test-run-hermes-remote> server # [ 13.160293] systemd[1045]: Listening on D-Bus User Message Bus Socket. vm-test-run-hermes-remote> server # [ 13.161065] systemd[1045]: Reached target Sockets. vm-test-run-hermes-remote> server # [ 13.161884] systemd[1045]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 13.162571] systemd[1]: Started User Manager for UID 1000. vm-test-run-hermes-remote> server # [ 13.168585] systemd[1]: Started Session 1 of User alice. vm-test-run-hermes-remote> server # [ 13.169533] systemd[1045]: Starting Run user-specific NixOS activation... vm-test-run-hermes-remote> server # [ 13.195212] systemd[1045]: Finished Run user-specific NixOS activation. vm-test-run-hermes-remote> server # [ 13.195905] systemd[1045]: Reached target Main User Target. vm-test-run-hermes-remote> server # [ 13.196655] systemd[1045]: Startup finished in 171ms. vm-test-run-hermes-remote> server # [ 13.210798] sshd-session[1053]: Accepted publickey for alice from 2001:db8:1::1 port 49378 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E vm-test-run-hermes-remote> server # [ 13.217063] sshd-session[1053]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 13.221909] systemd-logind[629]: New session '3' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 13.228238] systemd[1]: Started Session 3 of User alice. vm-test-run-hermes-remote> server # [ 13.240408] sshd-session[1063]: Received disconnect from 2001:db8:1::1 port 49378:11: disconnected by user vm-test-run-hermes-remote> server # [ 13.241262] sshd-session[1063]: Disconnected from user alice 2001:db8:1::1 port 49378 vm-test-run-hermes-remote> client # hermes-desktop-remote: this prints the dashboard token, which never expires. Keep it out of scrollback, logs and bug reports. vm-test-run-hermes-remote> server # [ 13.242182] sshd-session[1053]: pam_unix(sshd:session): session closed for user alice vm-test-run-hermes-remote> client # [ 13.318412] su[825]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> server # [ 13.244736] systemd[1]: session-3.scope: Deactivated successfully. vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 hermes-desktop-remote --print-env', in 0.50 seconds) vm-test-run-hermes-remote> server: must succeed: cat /var/lib/hermes-microvm/alice/desktop-token vm-test-run-hermes-remote> server # [ 13.246420] systemd-logind[629]: Session 3 logged out. Waiting for processes to exit. vm-test-run-hermes-remote> server # [ 13.247204] systemd-logind[629]: Removed session 3. vm-test-run-hermes-remote> server: (finished: must succeed: cat /var/lib/hermes-microvm/alice/desktop-token, in 0.01 seconds) vm-test-run-hermes-remote> client: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 systemctl --user is-active hermes-remote-tunnel.service' vm-test-run-hermes-remote> client # [ 13.346087] su[860]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 13.352256] su[860]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 13.363171] su[860]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 systemctl --user is-active hermes-remote-tunnel.service', in 0.03 seconds) vm-test-run-hermes-remote> (finished: subtest: the launcher opens the tunnel and prints the remote env, in 0.55 seconds) vm-test-run-hermes-remote> subtest: the key runs the forced command, never the caller's vm-test-run-hermes-remote> client: must succeed: su -l alice -c '/nix/store/5j1k7bxsljgrgql1cmr98wng8lpk2idn-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice alice@server -- id -un' vm-test-run-hermes-remote> client # [ 13.376538] su[865]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 13.382367] su[865]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 13.393507] sshd-session[1069]: Accepted publickey for alice from 2001:db8:1::1 port 49380 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E vm-test-run-hermes-remote> server # [ 13.398930] sshd-session[1069]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 13.403222] systemd-logind[629]: New session '4' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 13.420247] systemd[1]: Started Session 4 of User alice. vm-test-run-hermes-remote> server # [ 13.432493] sshd-session[1072]: Received disconnect from 2001:db8:1::1 port 49380:11: disconnected by user vm-test-run-hermes-remote> client # [ 13.508326] su[865]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> server # [ 13.433263] sshd-session[1072]: Disconnected from user alice 2001:db8:1::1 port 49380 vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c '/nix/store/5j1k7bxsljgrgql1cmr98wng8lpk2idn-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice alice@server -- id -un', in 0.15 seconds) vm-test-run-hermes-remote> server # [ 13.434175] sshd-session[1069]: pam_unix(sshd:session): session closed for user alice vm-test-run-hermes-remote> (finished: subtest: the key runs the forced command, never the caller's, in 0.15 seconds) vm-test-run-hermes-remote> subtest: the key forwards to the dashboard port and nowhere else vm-test-run-hermes-remote> client: must succeed: su -l alice -c '/nix/store/5j1k7bxsljgrgql1cmr98wng8lpk2idn-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice -N -f -L 127.0.0.1:24999:127.0.0.1:22 alice@server' vm-test-run-hermes-remote> server # [ 13.436539] systemd[1]: session-4.scope: Deactivated successfully. vm-test-run-hermes-remote> server # [ 13.438039] systemd-logind[629]: Session 4 logged out. Waiting for processes to exit. vm-test-run-hermes-remote> server # [ 13.438742] systemd-logind[629]: Removed session 4. vm-test-run-hermes-remote> client # [ 13.523688] su[870]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 13.529766] su[870]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 13.617710] su[870]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c '/nix/store/5j1k7bxsljgrgql1cmr98wng8lpk2idn-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice -N -f -L 127.0.0.1:24999:127.0.0.1:22 alice@server', in 0.11 seconds) vm-test-run-hermes-remote> client: waiting for TCP port 24999 on 127.0.0.1 vm-test-run-hermes-remote> server # [ 13.542359] sshd-session[1075]: Accepted publickey for alice from 2001:db8:1::1 port 49392 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E vm-test-run-hermes-remote> server # [ 13.549947] sshd-session[1075]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 13.555087] systemd-logind[629]: New session '5' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 13.561230] systemd[1]: Started Session 5 of User alice. vm-test-run-hermes-remote> client # Connection to 127.0.0.1 24999 port [tcp/*] succeeded! vm-test-run-hermes-remote> client: (finished: waiting for TCP port 24999 on 127.0.0.1, in 0.02 seconds) vm-test-run-hermes-remote> client: must succeed: timeout 5 /nix/store/qfgsbhv7smpx09pc2ipvw58g9xfxymfp-netcat-openbsd-1.238-1/bin/nc 127.0.0.1 24999 < /dev/null || true vm-test-run-hermes-remote> server # [ 13.565726] sshd-session[1078]: Received request from 2001:db8:1::1 port 49392 to connect to host 127.0.0.1 port 22, but the request was denied. vm-test-run-hermes-remote> server # [ 13.576547] sshd-session[1078]: Received request from 2001:db8:1::1 port 49392 to connect to host 127.0.0.1 port 22, but the request was denied. vm-test-run-hermes-remote> client: (finished: must succeed: timeout 5 /nix/store/qfgsbhv7smpx09pc2ipvw58g9xfxymfp-netcat-openbsd-1.238-1/bin/nc 127.0.0.1 24999 < /dev/null || true, in 0.01 seconds) vm-test-run-hermes-remote> (finished: subtest: the key forwards to the dashboard port and nowhere else, in 0.14 seconds) vm-test-run-hermes-remote> subtest: the guest dashboard answers /api/status through the tunnel vm-test-run-hermes-remote> ??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. vm-test-run-hermes-remote> File "/nix/store/sriy4r0q27j8r84xmfnwwzc7q3jqgm4m-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 vm-test-run-hermes-remote> client: waiting for success: /nix/store/cp8qnyl8i0s62g3a1465i258mf5bcr6k-curl-8.22.0-bin/bin/curl -sf -o /dev/null http://127.0.0.1:23901/api/status vm-test-run-hermes-remote> ??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. vm-test-run-hermes-remote> File "/nix/store/sriy4r0q27j8r84xmfnwwzc7q3jqgm4m-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 vm-test-run-hermes-remote> server # [ 13.615026] systemd[1]: Created slice Slice /system/hermes-dashboard-fwd-alice. vm-test-run-hermes-remote> server # [ 13.616401] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46130). vm-test-run-hermes-remote> server # [ 15.663586] socat[1080]: 2026/09/25 16:05:23 socat[1080] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 15.664845] systemd[1]: hermes-dashboard-fwd-alice@0-1-127.0.0.1:22901-127.0.0.1:46130.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 15.665660] systemd[1]: hermes-dashboard-fwd-alice@0-1-127.0.0.1:22901-127.0.0.1:46130.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 16.698440] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46132). vm-test-run-hermes-remote> server # [ 16.818401] microvm@hermes-alice[916]: +q6E616D65Booting initrd of NixOS 26.11 (Zokor) (Initrd). vm-test-run-hermes-remote> server # [ 17.062136] microvm@hermes-alice[916]: [ OK ] Created slice Slice /system/modprobe. vm-test-run-hermes-remote> server # [ 17.066393] microvm@hermes-alice[916]: [ OK ] Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 17.068413] microvm@hermes-alice[916]: [ OK ] Reached target Initrd Root Device. vm-test-run-hermes-remote> server # [ 17.070183] microvm@hermes-alice[916]: [ OK ] Reached target Path Units. vm-test-run-hermes-remote> server # [ 17.072425] microvm@hermes-alice[916]: [ OK ] Reached target Slice Units. vm-test-run-hermes-remote> server # [ 17.074522] microvm@hermes-alice[916]: [ OK ] Reached target Swaps. vm-test-run-hermes-remote> server # [ 17.076804] microvm@hermes-alice[916]: [ OK ] Reached target Timer Units. vm-test-run-hermes-remote> server # [ 17.079747] microvm@hermes-alice[916]: [ OK ] Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 17.082442] microvm@hermes-alice[916]: [ OK ] Listening on Journal Socket (/dev/log). vm-test-run-hermes-remote> server # [ 17.084793] microvm@hermes-alice[916]: [ OK ] Listening on Journal Sockets. vm-test-run-hermes-remote> server # [ 17.087414] microvm@hermes-alice[916]: [ OK ] Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 17.090216] microvm@hermes-alice[916]: [ OK ] Listening on udev Kernel Socket. vm-test-run-hermes-remote> server # [ 17.092449] microvm@hermes-alice[916]: [ OK ] Reached target Socket Units. vm-test-run-hermes-remote> server # [ 17.100388] microvm@hermes-alice[916]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 17.116140] microvm@hermes-alice[916]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 17.123794] microvm@hermes-alice[916]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 17.135791] microvm@hermes-alice[916]: Starting Load Kernel Modules... vm-test-run-hermes-remote> server # [ 17.149549] microvm@hermes-alice[916]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 17.160498] microvm@hermes-alice[916]: [ OK ] Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 17.165073] microvm@hermes-alice[916]: [ OK ] Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 17.182348] microvm@hermes-alice[916]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 17.306608] microvm@hermes-alice[916]: [ OK ] Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 17.314521] microvm@hermes-alice[916]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 17.429297] microvm@hermes-alice[916]: [ OK ] Finished Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 17.434733] microvm@hermes-alice[916]: [ OK ] Started Journal Service. vm-test-run-hermes-remote> server # [ 17.456691] microvm@hermes-alice[916]: [ OK ] Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 17.461455] microvm@hermes-alice[916]: [ OK ] Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 17.464089] microvm@hermes-alice[916]: [ OK ] Reached target Local File Systems. vm-test-run-hermes-remote> server # [ 17.469311] microvm@hermes-alice[916]: Starting Create System Files and Directories... vm-test-run-hermes-remote> server # [ 17.475894] microvm@hermes-alice[916]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 17.507930] microvm@hermes-alice[916]: [ OK ] Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 17.540539] microvm@hermes-alice[916]: [ OK ] Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 17.544084] microvm@hermes-alice[916]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 17.553556] microvm@hermes-alice[916]: [ OK ] Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 17.566265] microvm@hermes-alice[916]: [ OK ] Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 17.570222] microvm@hermes-alice[916]: [ OK ] Reached target System Initialization. vm-test-run-hermes-remote> server # [ 17.572296] microvm@hermes-alice[916]: [ OK ] Reached target Basic System. vm-test-run-hermes-remote> server # [ 17.735598] microvm@hermes-alice[916]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 17.782630] microvm@hermes-alice[916]: [ OK ] Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 18.154071] microvm@hermes-alice[916]: Mounting /sysroot... vm-test-run-hermes-remote> server # [ 18.179121] microvm@hermes-alice[916]: [ OK ] Mounted /sysroot. vm-test-run-hermes-remote> server # [ 18.183465] microvm@hermes-alice[916]: [ OK ] Reached target Initrd Root File System. vm-test-run-hermes-remote> server # [ 18.188239] microvm@hermes-alice[916]: Mounting /sysroot/nix/.ro-store... vm-test-run-hermes-remote> server # [ 18.197639] microvm@hermes-alice[916]: Mounting /sysroot/nix/store... vm-test-run-hermes-remote> server # [ 18.201797] microvm@hermes-alice[916]: Mounting /sysroot/run... vm-test-run-hermes-remote> server # [ 18.213709] microvm@hermes-alice[916]: Mounting /sysroot/var/lib/hermes... vm-test-run-hermes-remote> server # [ 18.220724] microvm@hermes-alice[916]: Starting Mountpoints Configured in the Real Root... vm-test-run-hermes-remote> server # [ 18.223552] microvm@hermes-alice[916]: [ OK ] Mounted /sysroot/run. vm-test-run-hermes-remote> server # [ 18.230077] microvm@hermes-alice[916]: Mounting /sysroot/run/hermes-host... vm-test-run-hermes-remote> server # [ 18.237534] microvm@hermes-alice[916]: [ OK ] Mounted /sysroot/nix/store. vm-test-run-hermes-remote> server # [ 18.324639] microvm@hermes-alice[916]: [ OK ] Mounted /sysroot/nix/.ro-store. vm-test-run-hermes-remote> server # [ 18.327204] microvm@hermes-alice[916]: [ OK ] Mounted /sysroot/var/lib/hermes. vm-test-run-hermes-remote> server # [ 18.329682] microvm@hermes-alice[916]: [ OK ] Mounted /sysroot/run/hermes-host. vm-test-run-hermes-remote> server # [ 18.336832] microvm@hermes-alice[916]: [ OK ] Finished Mountpoints Configured in the Real Root. vm-test-run-hermes-remote> server # [ 18.341376] microvm@hermes-alice[916]: Starting nix-store-binds.service... vm-test-run-hermes-remote> server # [ 18.735366] socat[1085]: 2026/09/25 16:05:26 socat[1085] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 18.738625] systemd[1]: hermes-dashboard-fwd-alice@1-4097-127.0.0.1:22901-127.0.0.1:46132.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 18.739584] systemd[1]: hermes-dashboard-fwd-alice@1-4097-127.0.0.1:22901-127.0.0.1:46132.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 18.816489] microvm@hermes-alice[916]: [ OK ] Finished nix-store-binds.service. vm-test-run-hermes-remote> server # [ 18.820750] microvm@hermes-alice[916]: [ OK ] Reached target Initrd File Systems. vm-test-run-hermes-remote> server # [ 18.835305] microvm@hermes-alice[916]: Starting Find NixOS closure... vm-test-run-hermes-remote> server # [ 18.847591] microvm@hermes-alice[916]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-hermes-remote> server # [ 18.854731] microvm@hermes-alice[916]: [ OK ] Finished Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 18.863776] microvm@hermes-alice[916]: [ OK ] Finished Find NixOS closure. vm-test-run-hermes-remote> server # [ 18.867683] microvm@hermes-alice[916]: [ OK ] Reached target Initrd Default Target. vm-test-run-hermes-remote> server # [ 18.870975] microvm@hermes-alice[916]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-hermes-remote> server # [ 18.890537] microvm@hermes-alice[916]: [ OK ] Stopped target Initrd Default Target. vm-test-run-hermes-remote> server # [ 18.893921] microvm@hermes-alice[916]: [ OK ] Stopped target Basic System. vm-test-run-hermes-remote> server # [ 18.897716] microvm@hermes-alice[916]: [ OK ] Stopped target Initrd Root Device. vm-test-run-hermes-remote> server # [ 18.899801] microvm@hermes-alice[916]: [ OK ] Stopped target Path Units. vm-test-run-hermes-remote> server # [ 18.902171] microvm@hermes-alice[916]: [ OK ] Stopped target Slice Units. vm-test-run-hermes-remote> server # [ 18.904528] microvm@hermes-alice[916]: [ OK ] Stopped target Socket Units. vm-test-run-hermes-remote> server # [ 18.906841] microvm@hermes-alice[916]: [ OK ] Stopped target Timer Units. vm-test-run-hermes-remote> server # [ 18.909674] microvm@hermes-alice[916]: [ OK ] Closed D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 18.911915] microvm@hermes-alice[916]: [ OK ] Stopped Find NixOS closure. vm-test-run-hermes-remote> server # [ 18.914815] microvm@hermes-alice[916]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 18.918269] microvm@hermes-alice[916]: [ OK ] Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 18.921217] microvm@hermes-alice[916]: [ OK ] Stopped Create System Files and Directories. vm-test-run-hermes-remote> server # [ 18.923868] microvm@hermes-alice[916]: [ OK ] Stopped Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 18.927611] microvm@hermes-alice[916]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 18.930440] microvm@hermes-alice[916]: [ OK ] Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 18.942346] microvm@hermes-alice[916]: [ OK ] Finished Cleaning Up and Shutting Down Daemons. vm-test-run-hermes-remote> server # [ 18.953862] microvm@hermes-alice[916]: [ OK ] Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 18.962414] microvm@hermes-alice[916]: [ OK ] Stopped Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 18.966653] microvm@hermes-alice[916]: Starting Cleanup udev Database... vm-test-run-hermes-remote> server # [ 18.969966] microvm@hermes-alice[916]: [ OK ] Stopped Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 18.973183] microvm@hermes-alice[916]: [ OK ] Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 18.986753] microvm@hermes-alice[916]: [ OK ] Finished Cleanup udev Database. vm-test-run-hermes-remote> server # [ 18.989402] microvm@hermes-alice[916]: [ OK ] Reached target Switch Root. vm-test-run-hermes-remote> server # [ 18.993405] microvm@hermes-alice[916]: Starting NixOS Activation... vm-test-run-hermes-remote> server # [ 19.446387] microvm@hermes-alice[916]: [ OK ] Finished NixOS Activation. vm-test-run-hermes-remote> server # [ 19.450324] microvm@hermes-alice[916]: Starting Switch Root... vm-test-run-hermes-remote> server # [ 19.468800] microvm@hermes-alice[916]: [FAILED] Failed to start Switch Root. vm-test-run-hermes-remote> server # [ 19.472542] microvm@hermes-alice[916]: See 'systemctl status initrd-switch-root.service' for details. vm-test-run-hermes-remote> server # [ 19.520901] microvm@hermes-alice[916]: You are in emergency mode. After logging in, type "journalctl -xb" to view vm-test-run-hermes-remote> server # [ 19.522502] microvm@hermes-alice[916]: syst vm-test-run-hermes-remote> server # [ 19.523279] microvm@hermes-alice[916]: Cannot open access to console, the root account is locked. vm-test-run-hermes-remote> server # [ 19.524661] microvm@hermes-alice[916]: See sulogin(8) man page for more details. vm-test-run-hermes-remote> server # [ 19.525854] microvm@hermes-alice[916]: vm-test-run-hermes-remote> server # [ 19.526572] microvm@hermes-alice[916]: Press Enter to continue. vm-test-run-hermes-remote> server # [ 19.776843] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46144). vm-test-run-hermes-remote> server # [ 21.807504] socat[1090]: 2026/09/25 16:05:29 socat[1090] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 21.810531] systemd[1]: hermes-dashboard-fwd-alice@2-8193-127.0.0.1:22901-127.0.0.1:46144.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 21.811324] systemd[1]: hermes-dashboard-fwd-alice@2-8193-127.0.0.1:22901-127.0.0.1:46144.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 22.844596] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46152). vm-test-run-hermes-remote> server # [ 24.879535] socat[1095]: 2026/09/25 16:05:33 socat[1095] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 24.882156] systemd[1]: hermes-dashboard-fwd-alice@3-12289-127.0.0.1:22901-127.0.0.1:46152.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 24.882947] systemd[1]: hermes-dashboard-fwd-alice@3-12289-127.0.0.1:22901-127.0.0.1:46152.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 25.921423] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49678). vm-test-run-hermes-remote> server # [ 27.951526] socat[1100]: 2026/09/25 16:05:36 socat[1100] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 27.953601] systemd[1]: hermes-dashboard-fwd-alice@4-8194-127.0.0.1:22901-127.0.0.1:49678.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 27.954341] systemd[1]: hermes-dashboard-fwd-alice@4-8194-127.0.0.1:22901-127.0.0.1:49678.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 28.993552] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49686). vm-test-run-hermes-remote> server # [ 31.023630] socat[1105]: 2026/09/25 16:05:39 socat[1105] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 31.026258] systemd[1]: hermes-dashboard-fwd-alice@5-12290-127.0.0.1:22901-127.0.0.1:49686.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 31.027105] systemd[1]: hermes-dashboard-fwd-alice@5-12290-127.0.0.1:22901-127.0.0.1:49686.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 32.059470] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:49700). vm-test-run-hermes-remote> server # [ 34.095529] socat[1109]: 2026/09/25 16:05:42 socat[1109] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 34.097076] systemd[1]: hermes-dashboard-fwd-alice@6-12291-127.0.0.1:22901-127.0.0.1:49700.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 34.097644] systemd[1]: hermes-dashboard-fwd-alice@6-12291-127.0.0.1:22901-127.0.0.1:49700.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 35.126958] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:53110). vm-test-run-hermes-remote> server # [ 37.167538] socat[1114]: 2026/09/25 16:05:45 socat[1114] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 37.169371] systemd[1]: hermes-dashboard-fwd-alice@7-12292-127.0.0.1:22901-127.0.0.1:53110.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 37.170203] systemd[1]: hermes-dashboard-fwd-alice@7-12292-127.0.0.1:22901-127.0.0.1:53110.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 38.207763] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:53116). vm-test-run-hermes-remote> server # [ 40.239423] socat[1119]: 2026/09/25 16:05:48 socat[1119] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 40.240977] systemd[1]: hermes-dashboard-fwd-alice@8-12293-127.0.0.1:22901-127.0.0.1:53116.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 40.241819] systemd[1]: hermes-dashboard-fwd-alice@8-12293-127.0.0.1:22901-127.0.0.1:53116.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 41.275773] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:53132). vm-test-run-hermes-remote> server # [ 43.311561] socat[1124]: 2026/09/25 16:05:51 socat[1124] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 43.312947] systemd[1]: hermes-dashboard-fwd-alice@9-4098-127.0.0.1:22901-127.0.0.1:53132.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 43.313802] systemd[1]: hermes-dashboard-fwd-alice@9-4098-127.0.0.1:22901-127.0.0.1:53132.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 44.341487] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46400). vm-test-run-hermes-remote> server # [ 46.383596] socat[1128]: 2026/09/25 16:05:54 socat[1128] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 46.386201] systemd[1]: hermes-dashboard-fwd-alice@10-12294-127.0.0.1:22901-127.0.0.1:46400.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 46.386963] systemd[1]: hermes-dashboard-fwd-alice@10-12294-127.0.0.1:22901-127.0.0.1:46400.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 47.420694] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46402). vm-test-run-hermes-remote> server # [ 49.455420] socat[1132]: 2026/09/25 16:05:57 socat[1132] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 49.457953] systemd[1]: hermes-dashboard-fwd-alice@11-2-127.0.0.1:22901-127.0.0.1:46402.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 49.458735] systemd[1]: hermes-dashboard-fwd-alice@11-2-127.0.0.1:22901-127.0.0.1:46402.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 50.500032] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46410). vm-test-run-hermes-remote> server # [ 52.527542] socat[1136]: 2026/09/25 16:06:00 socat[1136] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 52.529436] systemd[1]: hermes-dashboard-fwd-alice@12-3-127.0.0.1:22901-127.0.0.1:46410.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 52.530234] systemd[1]: hermes-dashboard-fwd-alice@12-3-127.0.0.1:22901-127.0.0.1:46410.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 53.563508] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:51910). vm-test-run-hermes-remote> server # [ 55.599474] socat[1140]: 2026/09/25 16:06:03 socat[1140] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 55.602051] systemd[1]: hermes-dashboard-fwd-alice@13-4-127.0.0.1:22901-127.0.0.1:51910.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 55.602861] systemd[1]: hermes-dashboard-fwd-alice@13-4-127.0.0.1:22901-127.0.0.1:51910.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 56.638599] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:51914). vm-test-run-hermes-remote> server # [ 58.671564] socat[1144]: 2026/09/25 16:06:06 socat[1144] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 58.674046] systemd[1]: hermes-dashboard-fwd-alice@14-12295-127.0.0.1:22901-127.0.0.1:51914.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 58.674808] systemd[1]: hermes-dashboard-fwd-alice@14-12295-127.0.0.1:22901-127.0.0.1:51914.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 59.710582] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:51926). vm-test-run-hermes-remote> server # [ 61.743499] socat[1148]: 2026/09/25 16:06:09 socat[1148] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 61.745670] systemd[1]: hermes-dashboard-fwd-alice@15-4099-127.0.0.1:22901-127.0.0.1:51926.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 61.746612] systemd[1]: hermes-dashboard-fwd-alice@15-4099-127.0.0.1:22901-127.0.0.1:51926.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 62.782511] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:51936). vm-test-run-hermes-remote> server # [ 64.815442] socat[1152]: 2026/09/25 16:06:12 socat[1152] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 64.817686] systemd[1]: hermes-dashboard-fwd-alice@16-12296-127.0.0.1:22901-127.0.0.1:51936.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 64.820329] systemd[1]: hermes-dashboard-fwd-alice@16-12296-127.0.0.1:22901-127.0.0.1:51936.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 65.850570] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44914). vm-test-run-hermes-remote> server # [ 67.887512] socat[1156]: 2026/09/25 16:06:16 socat[1156] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 67.890031] systemd[1]: hermes-dashboard-fwd-alice@17-12297-127.0.0.1:22901-127.0.0.1:44914.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 67.890855] systemd[1]: hermes-dashboard-fwd-alice@17-12297-127.0.0.1:22901-127.0.0.1:44914.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 68.925456] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44922). vm-test-run-hermes-remote> server # [ 70.959501] socat[1160]: 2026/09/25 16:06:19 socat[1160] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 70.961629] systemd[1]: hermes-dashboard-fwd-alice@18-12298-127.0.0.1:22901-127.0.0.1:44922.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 70.964286] systemd[1]: hermes-dashboard-fwd-alice@18-12298-127.0.0.1:22901-127.0.0.1:44922.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 71.994750] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44936). vm-test-run-hermes-remote> server # [ 74.031451] socat[1164]: 2026/09/25 16:06:22 socat[1164] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 74.034574] systemd[1]: hermes-dashboard-fwd-alice@19-5-127.0.0.1:22901-127.0.0.1:44936.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 74.035584] systemd[1]: hermes-dashboard-fwd-alice@19-5-127.0.0.1:22901-127.0.0.1:44936.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 75.068532] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55976). vm-test-run-hermes-remote> server # [ 77.103561] socat[1168]: 2026/09/25 16:06:25 socat[1168] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 77.106453] systemd[1]: hermes-dashboard-fwd-alice@20-12299-127.0.0.1:22901-127.0.0.1:55976.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 77.107281] systemd[1]: hermes-dashboard-fwd-alice@20-12299-127.0.0.1:22901-127.0.0.1:55976.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 78.140900] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55978). vm-test-run-hermes-remote> server # [ 80.175623] socat[1172]: 2026/09/25 16:06:28 socat[1172] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 80.176681] systemd[1]: hermes-dashboard-fwd-alice@21-12300-127.0.0.1:22901-127.0.0.1:55978.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 80.177342] systemd[1]: hermes-dashboard-fwd-alice@21-12300-127.0.0.1:22901-127.0.0.1:55978.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 81.214884] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:55988). vm-test-run-hermes-remote> server # [ 83.247471] socat[1176]: 2026/09/25 16:06:31 socat[1176] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 83.249984] systemd[1]: hermes-dashboard-fwd-alice@22-8195-127.0.0.1:22901-127.0.0.1:55988.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 83.250743] systemd[1]: hermes-dashboard-fwd-alice@22-8195-127.0.0.1:22901-127.0.0.1:55988.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 84.287980] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38014). vm-test-run-hermes-remote> server # [ 86.319553] socat[1180]: 2026/09/25 16:06:34 socat[1180] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 86.322241] systemd[1]: hermes-dashboard-fwd-alice@23-4100-127.0.0.1:22901-127.0.0.1:38014.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 86.323030] systemd[1]: hermes-dashboard-fwd-alice@23-4100-127.0.0.1:22901-127.0.0.1:38014.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 87.359800] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38026). vm-test-run-hermes-remote> server # [ 89.391516] socat[1184]: 2026/09/25 16:06:37 socat[1184] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 89.394091] systemd[1]: hermes-dashboard-fwd-alice@24-4101-127.0.0.1:22901-127.0.0.1:38026.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 89.394946] systemd[1]: hermes-dashboard-fwd-alice@24-4101-127.0.0.1:22901-127.0.0.1:38026.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 90.435579] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:38028). vm-test-run-hermes-remote> server # [ 92.463585] socat[1188]: 2026/09/25 16:06:40 socat[1188] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 92.465698] systemd[1]: hermes-dashboard-fwd-alice@25-8196-127.0.0.1:22901-127.0.0.1:38028.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 92.466639] systemd[1]: hermes-dashboard-fwd-alice@25-8196-127.0.0.1:22901-127.0.0.1:38028.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 93.507765] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40638). vm-test-run-hermes-remote> server # [ 95.535590] socat[1192]: 2026/09/25 16:06:43 socat[1192] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 95.537908] systemd[1]: hermes-dashboard-fwd-alice@26-8197-127.0.0.1:22901-127.0.0.1:40638.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 95.538692] systemd[1]: hermes-dashboard-fwd-alice@26-8197-127.0.0.1:22901-127.0.0.1:40638.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 96.575752] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40648). vm-test-run-hermes-remote> server # [ 98.607630] socat[1196]: 2026/09/25 16:06:46 socat[1196] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 98.610222] systemd[1]: hermes-dashboard-fwd-alice@27-8198-127.0.0.1:22901-127.0.0.1:40648.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 98.611050] systemd[1]: hermes-dashboard-fwd-alice@27-8198-127.0.0.1:22901-127.0.0.1:40648.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 99.647733] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40664). vm-test-run-hermes-remote> server # [ 101.679510] socat[1200]: 2026/09/25 16:06:49 socat[1200] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 101.681947] systemd[1]: hermes-dashboard-fwd-alice@28-4102-127.0.0.1:22901-127.0.0.1:40664.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 101.682702] systemd[1]: hermes-dashboard-fwd-alice@28-4102-127.0.0.1:22901-127.0.0.1:40664.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 102.720830] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:40678). vm-test-run-hermes-remote> server # [ 104.751499] socat[1204]: 2026/09/25 16:06:52 socat[1204] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 104.754201] systemd[1]: hermes-dashboard-fwd-alice@29-8199-127.0.0.1:22901-127.0.0.1:40678.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 104.754960] systemd[1]: hermes-dashboard-fwd-alice@29-8199-127.0.0.1:22901-127.0.0.1:40678.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 105.788714] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:57034). vm-test-run-hermes-remote> server # [ 107.823562] socat[1208]: 2026/09/25 16:06:55 socat[1208] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 107.825707] systemd[1]: hermes-dashboard-fwd-alice@30-4103-127.0.0.1:22901-127.0.0.1:57034.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 107.826648] systemd[1]: hermes-dashboard-fwd-alice@30-4103-127.0.0.1:22901-127.0.0.1:57034.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 108.859935] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:57044). vm-test-run-hermes-remote> server # [ 110.895489] socat[1212]: 2026/09/25 16:06:59 socat[1212] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 110.897585] systemd[1]: hermes-dashboard-fwd-alice@31-4104-127.0.0.1:22901-127.0.0.1:57044.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 110.898366] systemd[1]: hermes-dashboard-fwd-alice@31-4104-127.0.0.1:22901-127.0.0.1:57044.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 111.936595] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:57054). vm-test-run-hermes-remote> server # [ 113.967509] socat[1216]: 2026/09/25 16:07:02 socat[1216] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 113.969634] systemd[1]: hermes-dashboard-fwd-alice@32-12301-127.0.0.1:22901-127.0.0.1:57054.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 113.970570] systemd[1]: hermes-dashboard-fwd-alice@32-12301-127.0.0.1:22901-127.0.0.1:57054.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 115.007704] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:43326). vm-test-run-hermes-remote> server # [ 117.039633] socat[1220]: 2026/09/25 16:07:05 socat[1220] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 117.042251] systemd[1]: hermes-dashboard-fwd-alice@33-8200-127.0.0.1:22901-127.0.0.1:43326.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 117.043124] systemd[1]: hermes-dashboard-fwd-alice@33-8200-127.0.0.1:22901-127.0.0.1:43326.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 118.078778] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:43338). vm-test-run-hermes-remote> server # [ 120.111592] socat[1224]: 2026/09/25 16:07:08 socat[1224] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 120.114232] systemd[1]: hermes-dashboard-fwd-alice@34-8201-127.0.0.1:22901-127.0.0.1:43338.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 120.115141] systemd[1]: hermes-dashboard-fwd-alice@34-8201-127.0.0.1:22901-127.0.0.1:43338.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 121.151662] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:43346). vm-test-run-hermes-remote> server # [ 123.183616] socat[1228]: 2026/09/25 16:07:11 socat[1228] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 123.186352] systemd[1]: hermes-dashboard-fwd-alice@35-8202-127.0.0.1:22901-127.0.0.1:43346.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 123.187151] systemd[1]: hermes-dashboard-fwd-alice@35-8202-127.0.0.1:22901-127.0.0.1:43346.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 124.225605] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45164). vm-test-run-hermes-remote> server # [ 126.255385] socat[1232]: 2026/09/25 16:07:14 socat[1232] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 126.258081] systemd[1]: hermes-dashboard-fwd-alice@36-8203-127.0.0.1:22901-127.0.0.1:45164.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 126.258836] systemd[1]: hermes-dashboard-fwd-alice@36-8203-127.0.0.1:22901-127.0.0.1:45164.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 127.291667] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45168). vm-test-run-hermes-remote> server # [ 129.327550] socat[1236]: 2026/09/25 16:07:17 socat[1236] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 129.329936] systemd[1]: hermes-dashboard-fwd-alice@37-6-127.0.0.1:22901-127.0.0.1:45168.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 129.330742] systemd[1]: hermes-dashboard-fwd-alice@37-6-127.0.0.1:22901-127.0.0.1:45168.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 130.367639] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45170).