these 4 derivations will be built: /nix/store/chdk8363mqqwy8imc36vbaf6i1wfcp51-test-script.drv /nix/store/lh4816h4d1vala3mmbd6b4lgjmiy9gaa-driverConfiguration.json.drv /nix/store/kxc94hyw4cf66kl6cgc8xyzfagkp2nng-nixos-test-driver-hermes-remote.drv /nix/store/l3svrki9lgwmh4yjy1w5v7ar6fq3am8y-vm-test-run-hermes-remote.drv building '/nix/store/chdk8363mqqwy8imc36vbaf6i1wfcp51-test-script.drv' building '/nix/store/lh4816h4d1vala3mmbd6b4lgjmiy9gaa-driverConfiguration.json.drv' driverConfiguration.json> structuredAttrs is enabled building '/nix/store/kxc94hyw4cf66kl6cgc8xyzfagkp2nng-nixos-test-driver-hermes-remote.drv' nixos-test-driver-hermes-remote> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-hermes-remote> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-hermes-remote> All checks passed! nixos-test-driver-hermes-remote> Linting test script (enable/disable: config.skipLint) nixos-test-driver-hermes-remote> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint nixos-test-driver-hermes-remote> All checks passed! building '/nix/store/l3svrki9lgwmh4yjy1w5v7ar6fq3am8y-vm-test-run-hermes-remote.drv' vm-test-run-hermes-remote> Machine state will be reset. To keep it, pass --keep-machine-state vm-test-run-hermes-remote> start all VLans vm-test-run-hermes-remote> (finished: start all VLans, in 0.00 seconds) vm-test-run-hermes-remote> Test will time out and terminate in 3600.0 seconds vm-test-run-hermes-remote> run the VM test script vm-test-run-hermes-remote> additionally exposed symbols: vm-test-run-hermes-remote> client, server, vm-test-run-hermes-remote> vlan1, vm-test-run-hermes-remote> start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh vm-test-run-hermes-remote> start all VMs vm-test-run-hermes-remote> client: starting vm vm-test-run-hermes-remote> server: starting vm vm-test-run-hermes-remote> client # Disk image does not exist, creating the virtualisation disk image... vm-test-run-hermes-remote> client: QEMU running (pid 48) vm-test-run-hermes-remote> client # Formatting '/build/vm-state-client/tmp.HjRe4n7ptv', fmt=raw size=1073741824 vm-test-run-hermes-remote> client # mke2fs 1.47.4 (6-Mar-2025) vm-test-run-hermes-remote> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-hermes-remote> client # Discarding device blocks: 0/262144 done vm-test-run-hermes-remote> server # Formatting '/build/vm-state-server/tmp.VatKe3hd4j', fmt=raw size=25769803776 vm-test-run-hermes-remote> client # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-hermes-remote> server # mke2fs 1.47.4 (6-Mar-2025) vm-test-run-hermes-remote> client # Filesystem UUID: 081d5a54-3f64-477a-b748-d66530247874 vm-test-run-hermes-remote> server # Discarding device blocks: 0/6291456 done vm-test-run-hermes-remote> server: QEMU running (pid 47) vm-test-run-hermes-remote> server # Creating filesystem with 6291456 4k blocks and 1572864 inodes vm-test-run-hermes-remote> client # Superblock backups stored on blocks: vm-test-run-hermes-remote> server # Filesystem UUID: 617e88ef-edb6-4186-a28c-a1c920557a12 vm-test-run-hermes-remote> client # 32768, 98304, 163840, 229376 vm-test-run-hermes-remote> server # Superblock backups stored on blocks: vm-test-run-hermes-remote> (finished: start all VMs, in 0.18 seconds) vm-test-run-hermes-remote> server # 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # Allocating group tables: 0/8 done vm-test-run-hermes-remote> server: waiting for unit multi-user.target vm-test-run-hermes-remote> server # 4096000 vm-test-run-hermes-remote> server: waiting for the VM to finish booting vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> client # Writing inode tables: 0/8 done vm-test-run-hermes-remote> server # Allocating group tables: 0/192 done vm-test-run-hermes-remote> client # Creating journal (8192 blocks): done vm-test-run-hermes-remote> server # Writing inode tables: 0/192 done vm-test-run-hermes-remote> client # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-hermes-remote> server # Creating journal (32768 blocks): done vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> server # Writing superblocks and filesystem accounting information: 0/192 done vm-test-run-hermes-remote> client # Virtualisation disk image created. vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # Virtualisation disk image created. vm-test-run-hermes-remote> client # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-hermes-remote> server # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC730+7EF2C730 CA00 vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+7EFCC730+7EF2C730 CA00 vm-test-run-hermes-remote> client # Press Ctrl-B to configure iPXE (PCI 00:02.0)... vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 7EFCC730 7EF2C730 CB00 vm-test-run-hermes-remote> server # Press Ctrl-B to configure iPXE (PCI 00:02.0)... vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 7EFCC730 7EF2C730 CB00 vm-test-run-hermes-remote> client # Press Ctrl-B to configure iPXE (PCI 00:08.0)... vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> server # Press Ctrl-B to configure iPXE (PCI 00:08.0)... vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> server # vm-test-run-hermes-remote> client # Booting from ROM... vm-test-run-hermes-remote> server # Booting from ROM... vm-test-run-hermes-remote> client # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.45 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Wed Aug 19 16:18:21 UTC 2026 vm-test-run-hermes-remote> client # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/c5cjyv1jk7s9f4bmhqqm4f741ssgxszp-nixos-system-client-test/init regInfo=/nix/store/3l79zhh013z2y0qd2ldzna3yn167gw4q-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> client # [ 0.000000] BIOS-provided physical RAM map: vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved vm-test-run-hermes-remote> client # [ 0.000000] NX (Execute Disable) protection: active vm-test-run-hermes-remote> client # [ 0.000000] APIC: Static calls initialized vm-test-run-hermes-remote> client # [ 0.000000] SMBIOS 2.8 present. vm-test-run-hermes-remote> client # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 vm-test-run-hermes-remote> client # [ 0.000000] DMI: Memory slots populated: 1/1 vm-test-run-hermes-remote> client # [ 0.000000] Hypervisor detected: KVM vm-test-run-hermes-remote> client # [ 0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 vm-test-run-hermes-remote> client # [ 0.000001] kvm-clock: using sched offset of 450074190 cycles vm-test-run-hermes-remote> client # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-hermes-remote> client # [ 0.000006] tsc: Detected 4192.088 MHz processor vm-test-run-hermes-remote> client # [ 0.000704] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> client # [ 0.000735] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs vm-test-run-hermes-remote> client # [ 0.000738] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT vm-test-run-hermes-remote> client # [ 0.002578] found SMP MP-table at [mem 0x000f5450-0x000f545f] vm-test-run-hermes-remote> client # [ 0.002595] Using GB pages for direct mapping vm-test-run-hermes-remote> client # [ 0.002696] RAMDISK: [mem 0x7e34d000-0x7ffcffff] vm-test-run-hermes-remote> client # [ 0.002711] ACPI: Early table checksum verification disabled vm-test-run-hermes-remote> client # [ 0.002720] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) vm-test-run-hermes-remote> client # [ 0.002726] ACPI: RSDT 0x000000007FFE247D 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002736] ACPI: FACP 0x000000007FFE226D 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002746] ACPI: DSDT 0x000000007FFE0040 00222D (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002748] ACPI: FACS 0x000000007FFE0000 000040 vm-test-run-hermes-remote> client # [ 0.002750] ACPI: APIC 0x000000007FFE2361 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002752] ACPI: HPET 0x000000007FFE23E1 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002753] ACPI: MCFG 0x000000007FFE2419 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002755] ACPI: WAET 0x000000007FFE2455 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> client # [ 0.002756] ACPI: Reserving FACP table memory at [mem 0x7ffe226d-0x7ffe2360] vm-test-run-hermes-remote> client # [ 0.002756] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226c] vm-test-run-hermes-remote> client # [ 0.002757] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] vm-test-run-hermes-remote> client # [ 0.002757] ACPI: Reserving APIC table memory at [mem 0x7ffe2361-0x7ffe23e0] vm-test-run-hermes-remote> client # [ 0.002758] ACPI: Reserving HPET table memory at [mem 0x7ffe23e1-0x7ffe2418] vm-test-run-hermes-remote> client # [ 0.002758] ACPI: Reserving MCFG table memory at [mem 0x7ffe2419-0x7ffe2454] vm-test-run-hermes-remote> client # [ 0.002758] ACPI: Reserving WAET table memory at [mem 0x7ffe2455-0x7ffe247c] vm-test-run-hermes-remote> client # [ 0.003162] No NUMA configuration found vm-test-run-hermes-remote> client # [ 0.003163] Faking a node at [mem 0x0000000000000000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.003166] NODE_DATA(0) allocated [mem 0x7ffd2780-0x7ffd7cff] vm-test-run-hermes-remote> client # [ 0.003259] Zone ranges: vm-test-run-hermes-remote> client # [ 0.003260] DMA [mem 0x0000000000001000-0x0000000000ffffff] vm-test-run-hermes-remote> client # [ 0.003262] DMA32 [mem 0x0000000001000000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.003263] Normal empty vm-test-run-hermes-remote> client # [ 0.003264] Device empty vm-test-run-hermes-remote> client # [ 0.003265] Movable zone start for each node vm-test-run-hermes-remote> client # [ 0.003265] Early memory node ranges vm-test-run-hermes-remote> client # [ 0.003266] node 0: [mem 0x0000000000001000-0x000000000009efff] vm-test-run-hermes-remote> client # [ 0.003267] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.003268] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.003284] On node 0, zone DMA: 1 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.003515] On node 0, zone DMA: 97 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.033663] On node 0, zone DMA32: 40 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.034571] ACPI: PM-Timer IO Port: 0x608 vm-test-run-hermes-remote> client # [ 0.034589] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) vm-test-run-hermes-remote> client # [ 0.034625] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 vm-test-run-hermes-remote> client # [ 0.034628] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) vm-test-run-hermes-remote> client # [ 0.034629] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) vm-test-run-hermes-remote> client # [ 0.034630] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) vm-test-run-hermes-remote> client # [ 0.034631] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) vm-test-run-hermes-remote> client # [ 0.034632] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) vm-test-run-hermes-remote> client # [ 0.034634] ACPI: Using ACPI (MADT) for SMP configuration information vm-test-run-hermes-remote> client # [ 0.034635] ACPI: HPET id: 0x8086a201 base: 0xfed00000 vm-test-run-hermes-remote> client # [ 0.034640] TSC deadline timer available vm-test-run-hermes-remote> client # [ 0.034644] CPU topo: Max. logical packages: 1 vm-test-run-hermes-remote> client # [ 0.034645] CPU topo: Max. logical dies: 1 vm-test-run-hermes-remote> client # [ 0.034645] CPU topo: Max. dies per package: 1 vm-test-run-hermes-remote> client # [ 0.034648] CPU topo: Max. threads per core: 1 vm-test-run-hermes-remote> client # [ 0.034649] CPU topo: Num. cores per package: 2 vm-test-run-hermes-remote> client # [ 0.034649] CPU topo: Num. threads per package: 2 vm-test-run-hermes-remote> client # [ 0.034649] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs vm-test-run-hermes-remote> client # [ 0.034668] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() vm-test-run-hermes-remote> client # [ 0.034683] kvm-guest: KVM setup pv remote TLB flush vm-test-run-hermes-remote> client # [ 0.034685] kvm-guest: setup PV sched yield vm-test-run-hermes-remote> client # [ 0.034702] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] vm-test-run-hermes-remote> client # [ 0.034703] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] vm-test-run-hermes-remote> client # [ 0.034704] [mem 0xc0000000-0xfed1bfff] available for PCI devices vm-test-run-hermes-remote> client # [ 0.034706] Booting paravirtualized kernel on KVM vm-test-run-hermes-remote> client # [ 0.034709] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns vm-test-run-hermes-remote> client # [ 0.038287] setup_percpu: NR_CPUS:384 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 vm-test-run-hermes-remote> client # [ 0.040164] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u1048576 vm-test-run-hermes-remote> client # [ 0.040210] kvm-guest: PV spinlocks enabled vm-test-run-hermes-remote> client # [ 0.040211] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) vm-test-run-hermes-remote> client # [ 0.040214] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/c5cjyv1jk7s9f4bmhqqm4f741ssgxszp-nixos-system-client-test/init regInfo=/nix/store/3l79zhh013z2y0qd2ldzna3yn167gw4q-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> client # [ 0.040293] Unknown kernel command line parameters "regInfo=/nix/store/3l79zhh013z2y0qd2ldzna3yn167gw4q-closure-info/registration", will be passed to user space. vm-test-run-hermes-remote> client # [ 0.040496] random: crng init done vm-test-run-hermes-remote> client # [ 0.040497] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes vm-test-run-hermes-remote> client # [ 0.042379] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) vm-test-run-hermes-remote> client # [ 0.043325] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) vm-test-run-hermes-remote> client # [ 0.043372] Fallback order for Node 0: 0 vm-test-run-hermes-remote> client # [ 0.043380] Built 1 zonelists, mobility grouping on. Total pages: 524150 vm-test-run-hermes-remote> client # [ 0.043382] Policy zone: DMA32 vm-test-run-hermes-remote> client # [ 0.045308] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-hermes-remote> client # [ 0.049817] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 vm-test-run-hermes-remote> client # [ 0.053279] allocated 4194304 bytes of page_ext vm-test-run-hermes-remote> client # [ 0.062392] ftrace: allocating 48728 entries in 192 pages vm-test-run-hermes-remote> client # [ 0.062394] ftrace: allocated 192 pages with 2 groups vm-test-run-hermes-remote> client # [ 0.063074] Dynamic Preempt: lazy vm-test-run-hermes-remote> client # [ 0.063326] rcu: Preemptible hierarchical RCU implementation. vm-test-run-hermes-remote> client # [ 0.063326] rcu: RCU event tracing is enabled. vm-test-run-hermes-remote> client # [ 0.063327] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.063329] Trampoline variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.063329] Rude variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.063329] Tracing variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.063330] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. vm-test-run-hermes-remote> client # [ 0.063331] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 vm-test-run-hermes-remote> client # [ 0.063340] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.063342] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.063342] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. vm-test-run-hermes-remote> client # [ 0.066853] NR_IRQS: 24832, nr_irqs: 440, preallocated irqs: 16 vm-test-run-hermes-remote> client # [ 0.067101] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-hermes-remote> client # [ 0.067108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns vm-test-run-hermes-remote> client # [ 0.067266] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-hermes-remote> client # [ 0.072821] Console: colour VGA+ 80x25 vm-test-run-hermes-remote> client # [ 0.072824] printk: legacy console [tty0] enabled vm-test-run-hermes-remote> client # [ 0.107149] printk: legacy console [ttyS0] enabled vm-test-run-hermes-remote> client # [ 0.256196] ACPI: Core revision 20250807 vm-test-run-hermes-remote> client # [ 0.257443] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns vm-test-run-hermes-remote> client # [ 0.259834] APIC: Switch to symmetric I/O mode setup vm-test-run-hermes-remote> client # [ 0.261277] x2apic enabled vm-test-run-hermes-remote> client # [ 0.262196] APIC: Switched APIC routing to: physical x2apic vm-test-run-hermes-remote> client # [ 0.263471] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() vm-test-run-hermes-remote> client # [ 0.265220] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() vm-test-run-hermes-remote> client # [ 0.267398] kvm-guest: setup PV IPIs vm-test-run-hermes-remote> client # [ 0.269289] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 vm-test-run-hermes-remote> client # [ 0.270679] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns vm-test-run-hermes-remote> client # [ 0.273007] Calibrating delay loop (skipped) preset value.. 8384.17 BogoMIPS (lpj=4192088) vm-test-run-hermes-remote> client # [ 0.274119] x86/cpu: User Mode Instruction Prevention (UMIP) activated vm-test-run-hermes-remote> client # [ 0.275139] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 vm-test-run-hermes-remote> client # [ 0.276997] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 vm-test-run-hermes-remote> client # [ 0.279997] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto vm-test-run-hermes-remote> client # [ 0.280998] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl vm-test-run-hermes-remote> client # [ 0.282997] Spectre V2 : Mitigation: Enhanced / Automatic IBRS vm-test-run-hermes-remote> client # [ 0.284997] Speculative Return Stack Overflow: Mitigation: Safe RET vm-test-run-hermes-remote> client # [ 0.285996] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization vm-test-run-hermes-remote> client # [ 0.287011] Spectre V2 : Enabling IBPB for BPF vm-test-run-hermes-remote> client # [ 0.287998] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier vm-test-run-hermes-remote> client # [ 0.288998] active return thunk: srso_alias_return_thunk vm-test-run-hermes-remote> client # [ 0.290025] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' vm-test-run-hermes-remote> server # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.45 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Wed Aug 19 16:18:21 UTC 2026 vm-test-run-hermes-remote> client # [ 0.290996] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' vm-test-run-hermes-remote> client # [ 0.291996] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' vm-test-run-hermes-remote> client # [ 0.293996] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' vm-test-run-hermes-remote> client # [ 0.294996] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' vm-test-run-hermes-remote> server # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/zdk330y6g0ska4plad5g5m4plncdvs1s-nixos-system-server-test/init regInfo=/nix/store/1a151qqzlssrq7y40f4d2cd7x6cvi468-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> client # [ 0.296997] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-provided physical RAM map: vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-hermes-remote> client # [ 0.297997] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-hermes-remote> client # [ 0.299997] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable vm-test-run-hermes-remote> client # [ 0.301998] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved vm-test-run-hermes-remote> client # [ 0.302998] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved vm-test-run-hermes-remote> client # [ 0.304998] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved vm-test-run-hermes-remote> client # [ 0.305997] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-hermes-remote> client # [ 0.307997] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable vm-test-run-hermes-remote> client # [ 0.308997] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 vm-test-run-hermes-remote> server # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved vm-test-run-hermes-remote> client # [ 0.310997] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 vm-test-run-hermes-remote> server # [ 0.000000] NX (Execute Disable) protection: active vm-test-run-hermes-remote> client # [ 0.311996] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24 vm-test-run-hermes-remote> server # [ 0.000000] APIC: Static calls initialized vm-test-run-hermes-remote> server # [ 0.000000] SMBIOS 2.8 present. vm-test-run-hermes-remote> server # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 vm-test-run-hermes-remote> client # [ 0.312996] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format. vm-test-run-hermes-remote> server # [ 0.000000] DMI: Memory slots populated: 1/1 vm-test-run-hermes-remote> server # [ 0.000000] Hypervisor detected: KVM vm-test-run-hermes-remote> server # [ 0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> server # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 vm-test-run-hermes-remote> server # [ 0.000000] kvm-clock: using sched offset of 453575404 cycles vm-test-run-hermes-remote> server # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-hermes-remote> server # [ 0.000004] tsc: Detected 4192.088 MHz processor vm-test-run-hermes-remote> server # [ 0.000623] last_pfn = 0x280000 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> server # [ 0.000652] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs vm-test-run-hermes-remote> server # [ 0.000654] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT vm-test-run-hermes-remote> server # [ 0.000694] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 vm-test-run-hermes-remote> server # [ 0.002441] found SMP MP-table at [mem 0x000f5450-0x000f545f] vm-test-run-hermes-remote> server # [ 0.002471] Using GB pages for direct mapping vm-test-run-hermes-remote> server # [ 0.002541] RAMDISK: [mem 0x7e348000-0x7ffcffff] vm-test-run-hermes-remote> server # [ 0.002547] ACPI: Early table checksum verification disabled vm-test-run-hermes-remote> server # [ 0.002550] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS ) vm-test-run-hermes-remote> server # [ 0.002554] ACPI: RSDT 0x000000007FFE2539 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002558] ACPI: FACP 0x000000007FFE2319 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002564] ACPI: DSDT 0x000000007FFE0040 0022D9 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002566] ACPI: FACS 0x000000007FFE0000 000040 vm-test-run-hermes-remote> server # [ 0.002567] ACPI: APIC 0x000000007FFE240D 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002568] ACPI: HPET 0x000000007FFE249D 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002569] ACPI: MCFG 0x000000007FFE24D5 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002571] ACPI: WAET 0x000000007FFE2511 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-hermes-remote> server # [ 0.002572] ACPI: Reserving FACP table memory at [mem 0x7ffe2319-0x7ffe240c] vm-test-run-hermes-remote> client # [ 0.343143] Freeing SMP alternatives memory: 44K vm-test-run-hermes-remote> server # [ 0.002573] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2318] vm-test-run-hermes-remote> client # [ 0.343999] pid_max: default: 32768 minimum: 301 vm-test-run-hermes-remote> server # [ 0.002573] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] vm-test-run-hermes-remote> client # [ 0.345071] LSM: initializing lsm=capability,landlock,yama,bpf,ima vm-test-run-hermes-remote> client # [ 0.346101] landlock: Up and running. vm-test-run-hermes-remote> client # [ 0.347687] Yama: becoming mindful. vm-test-run-hermes-remote> server # [ 0.002573] ACPI: Reserving APIC table memory at [mem 0x7ffe240d-0x7ffe249c] vm-test-run-hermes-remote> server # [ 0.002574] ACPI: Reserving HPET table memory at [mem 0x7ffe249d-0x7ffe24d4] vm-test-run-hermes-remote> client # [ 0.348859] LSM support for eBPF active vm-test-run-hermes-remote> server # [ 0.002574] ACPI: Reserving MCFG table memory at [mem 0x7ffe24d5-0x7ffe2510] vm-test-run-hermes-remote> server # [ 0.002575] ACPI: Reserving WAET table memory at [mem 0x7ffe2511-0x7ffe2538] vm-test-run-hermes-remote> client # [ 0.350050] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) vm-test-run-hermes-remote> server # [ 0.002946] No NUMA configuration found vm-test-run-hermes-remote> client # [ 0.351030] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) vm-test-run-hermes-remote> server # [ 0.002947] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] vm-test-run-hermes-remote> server # [ 0.002950] NODE_DATA(0) allocated [mem 0x27fff8780-0x27fffdcff] vm-test-run-hermes-remote> server # [ 0.003045] Zone ranges: vm-test-run-hermes-remote> server # [ 0.003046] DMA [mem 0x0000000000001000-0x0000000000ffffff] vm-test-run-hermes-remote> client # [ 0.353483] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2) vm-test-run-hermes-remote> server # [ 0.003047] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] vm-test-run-hermes-remote> server # [ 0.003048] Normal [mem 0x0000000100000000-0x000000027fffffff] vm-test-run-hermes-remote> client # [ 0.354509] Performance Events: Fam17h+ core perfctr, AMD PMU driver. vm-test-run-hermes-remote> server # [ 0.003049] Device empty vm-test-run-hermes-remote> server # [ 0.003050] Movable zone start for each node vm-test-run-hermes-remote> client # [ 0.355009] ... version: 2 vm-test-run-hermes-remote> server # [ 0.003050] Early memory node ranges vm-test-run-hermes-remote> client # [ 0.355998] ... bit width: 48 vm-test-run-hermes-remote> server # [ 0.003050] node 0: [mem 0x0000000000001000-0x000000000009efff] vm-test-run-hermes-remote> client # [ 0.356998] ... generic counters: 6 vm-test-run-hermes-remote> server # [ 0.003052] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] vm-test-run-hermes-remote> client # [ 0.357998] ... generic bitmap: 000000000000003f vm-test-run-hermes-remote> server # [ 0.003052] node 0: [mem 0x0000000100000000-0x000000027fffffff] vm-test-run-hermes-remote> client # [ 0.358998] ... fixed-purpose counters: 0 vm-test-run-hermes-remote> server # [ 0.003053] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] vm-test-run-hermes-remote> client # [ 0.359998] ... fixed-purpose bitmap: 0000000000000000 vm-test-run-hermes-remote> server # [ 0.003070] On node 0, zone DMA: 1 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.360998] ... value mask: 0000ffffffffffff vm-test-run-hermes-remote> server # [ 0.003287] On node 0, zone DMA: 97 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.361997] ... max period: 00007fffffffffff vm-test-run-hermes-remote> server # [ 0.119548] On node 0, zone Normal: 40 pages in unavailable ranges vm-test-run-hermes-remote> client # [ 0.362998] ... global_ctrl mask: 000000000000003f vm-test-run-hermes-remote> server # [ 0.120406] ACPI: PM-Timer IO Port: 0x608 vm-test-run-hermes-remote> server # [ 0.120421] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) vm-test-run-hermes-remote> client # [ 0.364094] signal: max sigframe size: 3376 vm-test-run-hermes-remote> server # [ 0.120445] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 vm-test-run-hermes-remote> client # [ 0.365117] rcu: Hierarchical SRCU implementation. vm-test-run-hermes-remote> server # [ 0.120447] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) vm-test-run-hermes-remote> client # [ 0.365998] rcu: Max phase no-delay instances is 400. vm-test-run-hermes-remote> server # [ 0.120448] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) vm-test-run-hermes-remote> client # [ 0.367240] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-hermes-remote> server # [ 0.120449] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) vm-test-run-hermes-remote> server # [ 0.120450] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) vm-test-run-hermes-remote> server # [ 0.120450] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) vm-test-run-hermes-remote> server # [ 0.120452] ACPI: Using ACPI (MADT) for SMP configuration information vm-test-run-hermes-remote> client # [ 0.371725] smp: Bringing up secondary CPUs ... vm-test-run-hermes-remote> server # [ 0.120453] ACPI: HPET id: 0x8086a201 base: 0xfed00000 vm-test-run-hermes-remote> server # [ 0.120458] TSC deadline timer available vm-test-run-hermes-remote> client # [ 0.372296] smpboot: x86: Booting SMP configuration: vm-test-run-hermes-remote> server # [ 0.120464] CPU topo: Max. logical packages: 1 vm-test-run-hermes-remote> server # [ 0.120464] CPU topo: Max. logical dies: 1 vm-test-run-hermes-remote> client # [ 0.373010] .... node #0, CPUs: #1 vm-test-run-hermes-remote> server # [ 0.120465] CPU topo: Max. dies per package: 1 vm-test-run-hermes-remote> client # [ 0.373118] smp: Brought up 1 node, 2 CPUs vm-test-run-hermes-remote> server # [ 0.120467] CPU topo: Max. threads per core: 1 vm-test-run-hermes-remote> server # [ 0.120468] CPU topo: Num. cores per package: 4 vm-test-run-hermes-remote> client # [ 0.375004] smpboot: Total of 2 processors activated (16768.35 BogoMIPS) vm-test-run-hermes-remote> server # [ 0.120468] CPU topo: Num. threads per package: 4 vm-test-run-hermes-remote> server # [ 0.120468] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs vm-test-run-hermes-remote> server # [ 0.120489] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() vm-test-run-hermes-remote> client # [ 0.376258] Memory: 1969708K/2096600K available (17215K kernel code, 2726K rwdata, 13580K rodata, 3644K init, 2988K bss, 116028K reserved, 0K cma-reserved) vm-test-run-hermes-remote> server # [ 0.120504] kvm-guest: KVM setup pv remote TLB flush vm-test-run-hermes-remote> server # [ 0.120507] kvm-guest: setup PV sched yield vm-test-run-hermes-remote> client # [ 0.377358] devtmpfs: initialized vm-test-run-hermes-remote> server # [ 0.120523] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] vm-test-run-hermes-remote> client # [ 0.378222] x86/mm: Memory block size: 128MB vm-test-run-hermes-remote> server # [ 0.120524] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] vm-test-run-hermes-remote> server # [ 0.120525] PM: hibernation: Registered nosave memory: [mem 0x7ffd8000-0xffffffff] vm-test-run-hermes-remote> server # [ 0.120526] [mem 0xc0000000-0xfed1bfff] available for PCI devices vm-test-run-hermes-remote> client # [ 0.380199] posixtimers hash table entries: 1024 (order: 2, 16384 bytes, linear) vm-test-run-hermes-remote> server # [ 0.120528] Booting paravirtualized kernel on KVM vm-test-run-hermes-remote> client # [ 0.381051] futex hash table entries: 512 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear). vm-test-run-hermes-remote> server # [ 0.120531] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns vm-test-run-hermes-remote> server # [ 0.123934] setup_percpu: NR_CPUS:384 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 vm-test-run-hermes-remote> client # [ 0.382111] pinctrl core: initialized pinctrl subsystem vm-test-run-hermes-remote> server # [ 0.125673] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u524288 vm-test-run-hermes-remote> client # [ 0.383318] PM: RTC time: 21:02:04, date: 2026-09-15 vm-test-run-hermes-remote> server # [ 0.125721] kvm-guest: PV spinlocks enabled vm-test-run-hermes-remote> server # [ 0.125723] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) vm-test-run-hermes-remote> client # [ 0.386425] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-hermes-remote> client # [ 0.387392] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations vm-test-run-hermes-remote> server # [ 0.125725] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/zdk330y6g0ska4plad5g5m4plncdvs1s-nixos-system-server-test/init regInfo=/nix/store/1a151qqzlssrq7y40f4d2cd7x6cvi468-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-hermes-remote> client # [ 0.388021] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-hermes-remote> server # [ 0.125800] Unknown kernel command line parameters "regInfo=/nix/store/1a151qqzlssrq7y40f4d2cd7x6cvi468-closure-info/registration", will be passed to user space. vm-test-run-hermes-remote> client # [ 0.389260] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-hermes-remote> server # [ 0.126009] random: crng init done vm-test-run-hermes-remote> client # [ 0.390014] audit: initializing netlink subsys (disabled) vm-test-run-hermes-remote> server # [ 0.126009] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes vm-test-run-hermes-remote> server # [ 0.132707] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) vm-test-run-hermes-remote> client # [ 0.391071] audit: type=2000 audit(1789506124.802:1): state=initialized audit_enabled=0 res=1 vm-test-run-hermes-remote> server # [ 0.136066] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) vm-test-run-hermes-remote> client # [ 0.391315] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-hermes-remote> server # [ 0.136150] software IO TLB: area num 4. vm-test-run-hermes-remote> server # [ 0.197152] Fallback order for Node 0: 0 vm-test-run-hermes-remote> client # [ 0.392004] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-hermes-remote> server # [ 0.197165] Built 1 zonelists, mobility grouping on. Total pages: 2097014 vm-test-run-hermes-remote> server # [ 0.197169] Policy zone: Normal vm-test-run-hermes-remote> client # [ 0.393002] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-hermes-remote> server # [ 0.199233] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-hermes-remote> client # [ 0.393998] thermal_sys: Registered thermal governor 'user_space' vm-test-run-hermes-remote> server # [ 0.212771] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 vm-test-run-hermes-remote> server # [ 0.228332] allocated 16777216 bytes of page_ext vm-test-run-hermes-remote> client # [ 0.394998] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-hermes-remote> server # [ 0.238477] ftrace: allocating 48728 entries in 192 pages vm-test-run-hermes-remote> client # [ 0.396020] cpuidle: using governor menu vm-test-run-hermes-remote> server # [ 0.238481] ftrace: allocated 192 pages with 2 groups vm-test-run-hermes-remote> server # [ 0.239308] Dynamic Preempt: lazy vm-test-run-hermes-remote> server # [ 0.239468] rcu: Preemptible hierarchical RCU implementation. vm-test-run-hermes-remote> client # [ 0.398600] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 vm-test-run-hermes-remote> server # [ 0.239468] rcu: RCU event tracing is enabled. vm-test-run-hermes-remote> server # [ 0.239469] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=4. vm-test-run-hermes-remote> client # [ 0.400257] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] vm-test-run-hermes-remote> server # [ 0.239471] Trampoline variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.401000] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry vm-test-run-hermes-remote> server # [ 0.239471] Rude variant of Tasks RCU enabled. vm-test-run-hermes-remote> server # [ 0.239471] Tracing variant of Tasks RCU enabled. vm-test-run-hermes-remote> client # [ 0.402011] PCI: Using configuration type 1 for base access vm-test-run-hermes-remote> server # [ 0.239472] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. vm-test-run-hermes-remote> client # [ 0.403133] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. vm-test-run-hermes-remote> server # [ 0.239473] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 vm-test-run-hermes-remote> server # [ 0.239495] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. vm-test-run-hermes-remote> server # [ 0.239497] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. vm-test-run-hermes-remote> server # [ 0.239498] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. vm-test-run-hermes-remote> server # [ 0.243711] NR_IRQS: 24832, nr_irqs: 456, preallocated irqs: 16 vm-test-run-hermes-remote> server # [ 0.244038] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-hermes-remote> client # [ 0.411014] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> client # [ 0.411997] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-hermes-remote> server # [ 0.244047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns vm-test-run-hermes-remote> client # [ 0.412998] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> server # [ 0.244230] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-hermes-remote> client # [ 0.414003] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-hermes-remote> server # [ 0.250232] Console: colour VGA+ 80x25 vm-test-run-hermes-remote> server # [ 0.250238] printk: legacy console [tty0] enabled vm-test-run-hermes-remote> server # [ 0.288554] printk: legacy console [ttyS0] enabled vm-test-run-hermes-remote> server # [ 0.446817] ACPI: Core revision 20250807 vm-test-run-hermes-remote> client # [ 0.417793] ACPI: Added _OSI(Module Device) vm-test-run-hermes-remote> client # [ 0.418724] ACPI: Added _OSI(Processor Device) vm-test-run-hermes-remote> server # [ 0.447928] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns vm-test-run-hermes-remote> client # [ 0.418998] ACPI: Added _OSI(Processor Aggregator Device) vm-test-run-hermes-remote> server # [ 0.449981] APIC: Switch to symmetric I/O mode setup vm-test-run-hermes-remote> server # [ 0.451257] x2apic enabled vm-test-run-hermes-remote> server # [ 0.452150] APIC: Switched APIC routing to: physical x2apic vm-test-run-hermes-remote> client # [ 0.422172] ACPI: 1 ACPI AML tables successfully acquired and loaded vm-test-run-hermes-remote> server # [ 0.453393] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() vm-test-run-hermes-remote> client # [ 0.424028] ACPI: Interpreter enabled vm-test-run-hermes-remote> client # [ 0.424888] ACPI: PM: (supports S0 S3 S4 S5) vm-test-run-hermes-remote> server # [ 0.455026] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() vm-test-run-hermes-remote> client # [ 0.425727] ACPI: Using IOAPIC for interrupt routing vm-test-run-hermes-remote> server # [ 0.457351] kvm-guest: setup PV IPIs vm-test-run-hermes-remote> client # [ 0.426044] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug vm-test-run-hermes-remote> server # [ 0.459407] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 vm-test-run-hermes-remote> client # [ 0.426998] PCI: Using E820 reservations for host bridge windows vm-test-run-hermes-remote> client # [ 0.428137] ACPI: Enabled 2 GPEs in block 00 to 3F vm-test-run-hermes-remote> server # [ 0.460951] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns vm-test-run-hermes-remote> client # [ 0.432532] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) vm-test-run-hermes-remote> server # [ 0.467414] Calibrating delay loop (skipped) preset value.. 8384.17 BogoMIPS (lpj=4192088) vm-test-run-hermes-remote> server # [ 0.468503] x86/cpu: User Mode Instruction Prevention (UMIP) activated vm-test-run-hermes-remote> client # [ 0.433003] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] vm-test-run-hermes-remote> server # [ 0.469560] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 vm-test-run-hermes-remote> client # [ 0.434164] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] vm-test-run-hermes-remote> server # [ 0.471412] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 vm-test-run-hermes-remote> client # [ 0.435206] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] vm-test-run-hermes-remote> server # [ 0.472418] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto vm-test-run-hermes-remote> client # [ 0.436599] PCI host bridge to bus 0000:00 vm-test-run-hermes-remote> client # [ 0.437004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 0.473413] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl vm-test-run-hermes-remote> client # [ 0.438001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 0.475412] Spectre V2 : Mitigation: Enhanced / Automatic IBRS vm-test-run-hermes-remote> server # [ 0.476411] Speculative Return Stack Overflow: Mitigation: Safe RET vm-test-run-hermes-remote> client # [ 0.438998] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> client # [ 0.439998] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] vm-test-run-hermes-remote> server # [ 0.477412] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization vm-test-run-hermes-remote> server # [ 0.479422] Spectre V2 : Enabling IBPB for BPF vm-test-run-hermes-remote> client # [ 0.440999] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> server # [ 0.480412] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier vm-test-run-hermes-remote> client # [ 0.441999] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] vm-test-run-hermes-remote> server # [ 0.481412] active return thunk: srso_alias_return_thunk vm-test-run-hermes-remote> client # [ 0.442999] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-hermes-remote> server # [ 0.482435] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' vm-test-run-hermes-remote> client # [ 0.444158] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.483411] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' vm-test-run-hermes-remote> server # [ 0.484411] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' vm-test-run-hermes-remote> client # [ 0.445651] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.485411] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' vm-test-run-hermes-remote> server # [ 0.487411] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' vm-test-run-hermes-remote> server # [ 0.488411] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' vm-test-run-hermes-remote> client # [ 0.447994] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] vm-test-run-hermes-remote> server # [ 0.489411] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' vm-test-run-hermes-remote> client # [ 0.449021] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] vm-test-run-hermes-remote> server # [ 0.490411] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' vm-test-run-hermes-remote> client # [ 0.450037] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] vm-test-run-hermes-remote> server # [ 0.492411] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' vm-test-run-hermes-remote> client # [ 0.451174] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] vm-test-run-hermes-remote> server # [ 0.493412] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 vm-test-run-hermes-remote> server # [ 0.494411] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 vm-test-run-hermes-remote> client # [ 0.452763] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.495411] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 vm-test-run-hermes-remote> server # [ 0.497411] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 vm-test-run-hermes-remote> client # [ 0.456008] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f] vm-test-run-hermes-remote> server # [ 0.498411] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 vm-test-run-hermes-remote> client # [ 0.457009] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] vm-test-run-hermes-remote> server # [ 0.500411] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 vm-test-run-hermes-remote> client # [ 0.458037] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.501412] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24 vm-test-run-hermes-remote> client # [ 0.459009] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] vm-test-run-hermes-remote> server # [ 0.502411] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format. vm-test-run-hermes-remote> client # [ 0.461151] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.465030] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f] vm-test-run-hermes-remote> client # [ 0.466012] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] vm-test-run-hermes-remote> client # [ 0.467088] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] vm-test-run-hermes-remote> client # [ 0.468945] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.471702] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf] vm-test-run-hermes-remote> client # [ 0.472011] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] vm-test-run-hermes-remote> client # [ 0.473042] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] vm-test-run-hermes-remote> client # [ 0.474925] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.477022] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f] vm-test-run-hermes-remote> server # [ 0.527535] Freeing SMP alternatives memory: 44K vm-test-run-hermes-remote> client # [ 0.478010] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] vm-test-run-hermes-remote> server # [ 0.528414] pid_max: default: 32768 minimum: 301 vm-test-run-hermes-remote> client # [ 0.479038] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] vm-test-run-hermes-remote> server # [ 0.529489] LSM: initializing lsm=capability,landlock,yama,bpf,ima vm-test-run-hermes-remote> server # [ 0.530498] landlock: Up and running. vm-test-run-hermes-remote> client # [ 0.480908] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.531411] Yama: becoming mindful. vm-test-run-hermes-remote> server # [ 0.532605] LSM support for eBPF active vm-test-run-hermes-remote> client # [ 0.483011] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf] vm-test-run-hermes-remote> server # [ 0.533600] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-hermes-remote> client # [ 0.484010] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] vm-test-run-hermes-remote> server # [ 0.535521] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-hermes-remote> client # [ 0.485066] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.537622] smpboot: CPU0: AMD Ryzen 9 7950X3D 16-Core Processor (family: 0x19, model: 0x61, stepping: 0x2) vm-test-run-hermes-remote> client # [ 0.486932] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.538856] Performance Events: Fam17h+ core perfctr, AMD PMU driver. vm-test-run-hermes-remote> client # [ 0.489009] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f] vm-test-run-hermes-remote> server # [ 0.539420] ... version: 2 vm-test-run-hermes-remote> server # [ 0.540350] ... bit width: 48 vm-test-run-hermes-remote> client # [ 0.490009] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] vm-test-run-hermes-remote> server # [ 0.541152] ... generic counters: 6 vm-test-run-hermes-remote> client # [ 0.491039] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.541413] ... generic bitmap: 000000000000003f vm-test-run-hermes-remote> server # [ 0.542413] ... fixed-purpose counters: 0 vm-test-run-hermes-remote> server # [ 0.543377] ... fixed-purpose bitmap: 0000000000000000 vm-test-run-hermes-remote> client # [ 0.492954] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.544363] ... value mask: 0000ffffffffffff vm-test-run-hermes-remote> client # [ 0.495009] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df] vm-test-run-hermes-remote> server # [ 0.545367] ... max period: 00007fffffffffff vm-test-run-hermes-remote> server # [ 0.546362] ... global_ctrl mask: 000000000000003f vm-test-run-hermes-remote> client # [ 0.496008] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] vm-test-run-hermes-remote> server # [ 0.547461] signal: max sigframe size: 3376 vm-test-run-hermes-remote> client # [ 0.497042] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] vm-test-run-hermes-remote> server # [ 0.548468] rcu: Hierarchical SRCU implementation. vm-test-run-hermes-remote> client # [ 0.498008] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref] vm-test-run-hermes-remote> server # [ 0.549419] rcu: Max phase no-delay instances is 400. vm-test-run-hermes-remote> server # [ 0.550562] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level vm-test-run-hermes-remote> client # [ 0.499907] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.554633] smp: Bringing up secondary CPUs ... vm-test-run-hermes-remote> server # [ 0.555736] smpboot: x86: Booting SMP configuration: vm-test-run-hermes-remote> server # [ 0.556415] .... node #0, CPUs: #1 #2 #3 vm-test-run-hermes-remote> server # [ 0.557465] smp: Brought up 1 node, 4 CPUs vm-test-run-hermes-remote> server # [ 0.559415] smpboot: Total of 4 processors activated (33536.70 BogoMIPS) vm-test-run-hermes-remote> client # [ 0.502028] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] vm-test-run-hermes-remote> client # [ 0.504046] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] vm-test-run-hermes-remote> server # [ 0.560760] Memory: 8073948K/8388056K available (17215K kernel code, 2726K rwdata, 13580K rodata, 3644K init, 2988K bss, 290688K reserved, 0K cma-reserved) vm-test-run-hermes-remote> server # [ 0.561816] devtmpfs: initialized vm-test-run-hermes-remote> server # [ 0.563215] x86/mm: Memory block size: 128MB vm-test-run-hermes-remote> client # [ 0.506038] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.508814] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff] vm-test-run-hermes-remote> server # [ 0.566465] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear) vm-test-run-hermes-remote> client # [ 0.510016] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] vm-test-run-hermes-remote> server # [ 0.567539] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear). vm-test-run-hermes-remote> client # [ 0.511049] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.568531] pinctrl core: initialized pinctrl subsystem vm-test-run-hermes-remote> server # [ 0.569701] PM: RTC time: 21:02:05, date: 2026-09-15 vm-test-run-hermes-remote> client # [ 0.513142] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.572687] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-hermes-remote> client # [ 0.515692] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff] vm-test-run-hermes-remote> client # [ 0.516011] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] vm-test-run-hermes-remote> server # [ 0.574457] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations vm-test-run-hermes-remote> client # [ 0.517041] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.575493] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-hermes-remote> client # [ 0.519009] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.577251] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-hermes-remote> server # [ 0.578433] audit: initializing netlink subsys (disabled) vm-test-run-hermes-remote> client # [ 0.521787] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f] vm-test-run-hermes-remote> server # [ 0.579517] audit: type=2000 audit(1789506124.982:1): state=initialized audit_enabled=0 res=1 vm-test-run-hermes-remote> client # [ 0.523209] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.579911] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-hermes-remote> server # [ 0.580416] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-hermes-remote> client # [ 0.524750] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f] vm-test-run-hermes-remote> server # [ 0.581415] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-hermes-remote> client # [ 0.526185] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.582415] thermal_sys: Registered thermal governor 'user_space' vm-test-run-hermes-remote> client # [ 0.527780] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f] vm-test-run-hermes-remote> server # [ 0.583414] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-hermes-remote> server # [ 0.584441] cpuidle: using governor menu vm-test-run-hermes-remote> client # [ 0.529237] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.530714] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] vm-test-run-hermes-remote> server # [ 0.587663] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 vm-test-run-hermes-remote> server # [ 0.588696] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] vm-test-run-hermes-remote> client # [ 0.531354] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.589416] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry vm-test-run-hermes-remote> client # [ 0.532509] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO vm-test-run-hermes-remote> server # [ 0.590427] PCI: Using configuration type 1 for base access vm-test-run-hermes-remote> client # [ 0.533351] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.591572] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. vm-test-run-hermes-remote> client # [ 0.535038] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f] vm-test-run-hermes-remote> server # [ 0.592774] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> client # [ 0.536011] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] vm-test-run-hermes-remote> server # [ 0.594414] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-hermes-remote> server # [ 0.595414] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-hermes-remote> client # [ 0.537511] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.596414] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-hermes-remote> client # [ 0.538795] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] vm-test-run-hermes-remote> server # [ 0.599068] ACPI: Added _OSI(Module Device) vm-test-run-hermes-remote> server # [ 0.599414] ACPI: Added _OSI(Processor Device) vm-test-run-hermes-remote> server # [ 0.600414] ACPI: Added _OSI(Processor Aggregator Device) vm-test-run-hermes-remote> client # [ 0.545680] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.546170] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 vm-test-run-hermes-remote> server # [ 0.604393] ACPI: 1 ACPI AML tables successfully acquired and loaded vm-test-run-hermes-remote> client # [ 0.547137] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.548153] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 vm-test-run-hermes-remote> server # [ 0.607722] ACPI: Interpreter enabled vm-test-run-hermes-remote> server # [ 0.608429] ACPI: PM: (supports S0 S3 S4 S5) vm-test-run-hermes-remote> client # [ 0.549154] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 vm-test-run-hermes-remote> server # [ 0.609401] ACPI: Using IOAPIC for interrupt routing vm-test-run-hermes-remote> client # [ 0.550132] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.551120] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 vm-test-run-hermes-remote> server # [ 0.610359] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug vm-test-run-hermes-remote> server # [ 0.611413] PCI: Using E820 reservations for host bridge windows vm-test-run-hermes-remote> client # [ 0.552122] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 vm-test-run-hermes-remote> server # [ 0.612588] ACPI: Enabled 2 GPEs in block 00 to 3F vm-test-run-hermes-remote> client # [ 0.553106] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 vm-test-run-hermes-remote> client # [ 0.554025] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 vm-test-run-hermes-remote> client # [ 0.555012] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 vm-test-run-hermes-remote> client # [ 0.556015] ACPI: PCI: Interrupt link GSID configured for IRQ 19 vm-test-run-hermes-remote> server # [ 0.617233] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) vm-test-run-hermes-remote> client # [ 0.557020] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 vm-test-run-hermes-remote> client # [ 0.558014] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 vm-test-run-hermes-remote> server # [ 0.618419] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] vm-test-run-hermes-remote> server # [ 0.619479] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] vm-test-run-hermes-remote> client # [ 0.559018] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 vm-test-run-hermes-remote> server # [ 0.620516] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] vm-test-run-hermes-remote> client # [ 0.560048] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 vm-test-run-hermes-remote> server # [ 0.621864] PCI host bridge to bus 0000:00 vm-test-run-hermes-remote> client # [ 0.562015] iommu: Default domain type: Translated vm-test-run-hermes-remote> server # [ 0.622417] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> client # [ 0.562970] iommu: DMA domain TLB invalidation policy: lazy mode vm-test-run-hermes-remote> server # [ 0.623413] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 0.624413] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> client # [ 0.565446] ACPI: bus type USB registered vm-test-run-hermes-remote> client # [ 0.566173] usbcore: registered new interface driver usbfs vm-test-run-hermes-remote> server # [ 0.625414] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] vm-test-run-hermes-remote> client # [ 0.568027] usbcore: registered new interface driver hub vm-test-run-hermes-remote> server # [ 0.626413] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> client # [ 0.569030] usbcore: registered new device driver usb vm-test-run-hermes-remote> server # [ 0.627413] pci_bus 0000:00: root bus resource [mem 0xe0000000000-0xe07ffffffff window] vm-test-run-hermes-remote> server # [ 0.628414] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-hermes-remote> client # [ 0.572034] NetLabel: Initializing vm-test-run-hermes-remote> client # [ 0.572882] NetLabel: domain hash size = 128 vm-test-run-hermes-remote> server # [ 0.629511] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.573791] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO vm-test-run-hermes-remote> client # [ 0.575048] NetLabel: unlabeled traffic allowed by default vm-test-run-hermes-remote> server # [ 0.631132] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.576008] PCI: Using ACPI for IRQ routing vm-test-run-hermes-remote> server # [ 0.634409] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] vm-test-run-hermes-remote> server # [ 0.635437] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] vm-test-run-hermes-remote> server # [ 0.636454] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] vm-test-run-hermes-remote> server # [ 0.637609] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] vm-test-run-hermes-remote> server # [ 0.639280] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.641426] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f] vm-test-run-hermes-remote> server # [ 0.642472] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] vm-test-run-hermes-remote> server # [ 0.643468] pci 0000:00:02.0: BAR 4 [mem 0xe0000000000-0xe0000003fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.644424] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] vm-test-run-hermes-remote> server # [ 0.646574] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.648425] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f] vm-test-run-hermes-remote> server # [ 0.649424] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] vm-test-run-hermes-remote> server # [ 0.650455] pci 0000:00:03.0: BAR 4 [mem 0xe0000004000-0xe0000007fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.652728] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.654427] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf] vm-test-run-hermes-remote> server # [ 0.655424] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] vm-test-run-hermes-remote> server # [ 0.656475] pci 0000:00:04.0: BAR 4 [mem 0xe0000008000-0xe000000bfff 64bit pref] vm-test-run-hermes-remote> server # [ 0.658396] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.660434] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f] vm-test-run-hermes-remote> server # [ 0.661425] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] vm-test-run-hermes-remote> server # [ 0.662454] pci 0000:00:05.0: BAR 4 [mem 0xe000000c000-0xe000000ffff 64bit pref] vm-test-run-hermes-remote> server # [ 0.664404] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.667428] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf] vm-test-run-hermes-remote> server # [ 0.668430] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] vm-test-run-hermes-remote> server # [ 0.669474] pci 0000:00:06.0: BAR 4 [mem 0xe0000010000-0xe0000013fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.671515] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.674414] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f] vm-test-run-hermes-remote> server # [ 0.676431] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] vm-test-run-hermes-remote> server # [ 0.677463] pci 0000:00:07.0: BAR 4 [mem 0xe0000014000-0xe0000017fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.679424] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.682432] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df] vm-test-run-hermes-remote> server # [ 0.683424] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] vm-test-run-hermes-remote> server # [ 0.684454] pci 0000:00:08.0: BAR 4 [mem 0xe0000018000-0xe000001bfff 64bit pref] vm-test-run-hermes-remote> client # [ 0.662144] pci 0000:00:01.0: vgaarb: setting as boot VGA device vm-test-run-hermes-remote> server # [ 0.685424] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref] vm-test-run-hermes-remote> client # [ 0.662994] pci 0000:00:01.0: vgaarb: bridge control possible vm-test-run-hermes-remote> server # [ 0.687398] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.662994] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vm-test-run-hermes-remote> client # [ 0.663012] vgaarb: loaded vm-test-run-hermes-remote> client # [ 0.664097] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 vm-test-run-hermes-remote> server # [ 0.689434] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] vm-test-run-hermes-remote> client # [ 0.664999] hpet0: 3 comparators, 64-bit 100.000000 MHz counter vm-test-run-hermes-remote> server # [ 0.690454] pci 0000:00:09.0: BAR 4 [mem 0xe000001c000-0xe000001ffff 64bit pref] vm-test-run-hermes-remote> server # [ 0.692380] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.669134] clocksource: Switched to clocksource kvm-clock vm-test-run-hermes-remote> server # [ 0.695432] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff] vm-test-run-hermes-remote> client # [ 0.672323] VFS: Disk quotas dquot_6.6.0 vm-test-run-hermes-remote> server # [ 0.696424] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] vm-test-run-hermes-remote> client # [ 0.673466] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-hermes-remote> server # [ 0.697454] pci 0000:00:0a.0: BAR 4 [mem 0xe0000020000-0xe0000023fff 64bit pref] vm-test-run-hermes-remote> client # [ 0.675485] pnp: PnP ACPI init vm-test-run-hermes-remote> client # [ 0.676627] ACPI: IRQ 4 override to edge(!), high(!) vm-test-run-hermes-remote> server # [ 0.699413] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.677926] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved vm-test-run-hermes-remote> server # [ 0.701424] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff] vm-test-run-hermes-remote> client # [ 0.680033] pnp: PnP ACPI: found 6 devices vm-test-run-hermes-remote> server # [ 0.702424] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] vm-test-run-hermes-remote> server # [ 0.703455] pci 0000:00:0b.0: BAR 4 [mem 0xe0000024000-0xe0000027fff 64bit pref] vm-test-run-hermes-remote> server # [ 0.705454] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.707194] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f] vm-test-run-hermes-remote> server # [ 0.708656] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.689051] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns vm-test-run-hermes-remote> client # [ 0.691131] clocksource: Switched to clocksource acpi_pm vm-test-run-hermes-remote> server # [ 0.710181] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f] vm-test-run-hermes-remote> client # [ 0.692506] NET: Registered PF_INET protocol family vm-test-run-hermes-remote> server # [ 0.710894] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.693993] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.712162] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f] vm-test-run-hermes-remote> server # [ 0.712765] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.714156] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] vm-test-run-hermes-remote> server # [ 0.714746] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.716141] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO vm-test-run-hermes-remote> server # [ 0.717773] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint vm-test-run-hermes-remote> server # [ 0.719445] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f] vm-test-run-hermes-remote> client # [ 0.708668] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) vm-test-run-hermes-remote> server # [ 0.720424] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] vm-test-run-hermes-remote> client # [ 0.710560] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.721942] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint vm-test-run-hermes-remote> client # [ 0.712338] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-hermes-remote> client # [ 0.714117] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) vm-test-run-hermes-remote> server # [ 0.723191] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] vm-test-run-hermes-remote> client # [ 0.715744] TCP: Hash tables configured (established 16384 bind 16384) vm-test-run-hermes-remote> client # [ 0.717252] MPTCP token hash table entries: 2048 (order: 4, 49152 bytes, linear) vm-test-run-hermes-remote> client # [ 0.718932] UDP hash table entries: 1024 (order: 4, 65536 bytes, linear) vm-test-run-hermes-remote> client # [ 0.720392] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes, linear) vm-test-run-hermes-remote> server # [ 0.729290] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.721997] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-hermes-remote> server # [ 0.730538] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.723261] NET: Registered PF_XDP protocol family vm-test-run-hermes-remote> server # [ 0.731543] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.724367] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 0.732551] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.725700] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 0.733539] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.727081] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> server # [ 0.734533] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 vm-test-run-hermes-remote> client # [ 0.728547] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] vm-test-run-hermes-remote> server # [ 0.735547] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.730026] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> server # [ 0.736538] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 vm-test-run-hermes-remote> client # [ 0.731497] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] vm-test-run-hermes-remote> server # [ 0.737459] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 vm-test-run-hermes-remote> client # [ 0.733589] ACPI: \_SB_.GSIA: Enabled at IRQ 16 vm-test-run-hermes-remote> server # [ 0.738427] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 vm-test-run-hermes-remote> server # [ 0.739432] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 vm-test-run-hermes-remote> client # [ 0.735840] ACPI: \_SB_.GSIB: Enabled at IRQ 17 vm-test-run-hermes-remote> server # [ 0.740430] ACPI: PCI: Interrupt link GSID configured for IRQ 19 vm-test-run-hermes-remote> client # [ 0.738017] ACPI: \_SB_.GSIC: Enabled at IRQ 18 vm-test-run-hermes-remote> server # [ 0.741427] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 vm-test-run-hermes-remote> server # [ 0.742433] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 vm-test-run-hermes-remote> client # [ 0.740142] ACPI: \_SB_.GSID: Enabled at IRQ 19 vm-test-run-hermes-remote> server # [ 0.743427] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 vm-test-run-hermes-remote> client # [ 0.742034] PCI: CLS 0 bytes, default 64 vm-test-run-hermes-remote> server # [ 0.744427] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 vm-test-run-hermes-remote> server # [ 0.746825] iommu: Default domain type: Translated vm-test-run-hermes-remote> client # [ 0.743167] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns vm-test-run-hermes-remote> server # [ 0.747414] iommu: DMA domain TLB invalidation policy: lazy mode vm-test-run-hermes-remote> client # [ 0.743205] Trying to unpack rootfs image as initramfs... vm-test-run-hermes-remote> server # [ 0.748621] ACPI: bus type USB registered vm-test-run-hermes-remote> server # [ 0.749459] usbcore: registered new interface driver usbfs vm-test-run-hermes-remote> server # [ 0.750437] usbcore: registered new interface driver hub vm-test-run-hermes-remote> server # [ 0.751424] usbcore: registered new device driver usb vm-test-run-hermes-remote> server # [ 0.753033] NetLabel: Initializing vm-test-run-hermes-remote> server # [ 0.754019] NetLabel: domain hash size = 128 vm-test-run-hermes-remote> server # [ 0.754412] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO vm-test-run-hermes-remote> server # [ 0.755447] NetLabel: unlabeled traffic allowed by default vm-test-run-hermes-remote> server # [ 0.756422] PCI: Using ACPI for IRQ routing vm-test-run-hermes-remote> client # [ 0.760750] Initialise system trusted keyrings vm-test-run-hermes-remote> client # [ 0.762044] workingset: timestamp_bits=40 max_order=19 bucket_order=0 vm-test-run-hermes-remote> client # [ 0.771632] Key type asymmetric registered vm-test-run-hermes-remote> client # [ 0.772614] Asymmetric key parser 'x509' registered vm-test-run-hermes-remote> client # [ 0.773808] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) vm-test-run-hermes-remote> client # [ 0.775983] io scheduler mq-deadline registered vm-test-run-hermes-remote> client # [ 0.777063] io scheduler kyber registered vm-test-run-hermes-remote> client # [ 0.781206] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-hermes-remote> client # [ 0.782955] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A vm-test-run-hermes-remote> client # [ 0.785585] Linux agpgart interface v0.103 vm-test-run-hermes-remote> client # [ 0.786627] ACPI: bus type drm_connector registered vm-test-run-hermes-remote> client # [ 0.789212] usbcore: registered new interface driver usbserial_generic vm-test-run-hermes-remote> client # [ 0.790671] usbserial: USB Serial support registered for generic vm-test-run-hermes-remote> client # [ 0.792073] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. vm-test-run-hermes-remote> client # [ 0.792073] Please enable it if your BIOS has the CPPC option. vm-test-run-hermes-remote> client # [ 0.795072] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled vm-test-run-hermes-remote> client # [ 0.796844] drop_monitor: Initializing network drop monitor service vm-test-run-hermes-remote> client # [ 0.798390] NET: Registered PF_INET6 protocol family vm-test-run-hermes-remote> client # [ 0.800082] Segment Routing with IPv6 vm-test-run-hermes-remote> client # [ 0.800976] In-situ OAM (IOAM) with IPv6 vm-test-run-hermes-remote> client # [ 0.806124] IPI shorthand broadcast: enabled vm-test-run-hermes-remote> client # [ 0.810085] sched_clock: Marking stable (614022335, 195886501)->(930802285, -120893449) vm-test-run-hermes-remote> client # [ 0.812035] registered taskstats version 1 vm-test-run-hermes-remote> client # [ 0.813212] Loading compiled-in X.509 certificates vm-test-run-hermes-remote> client # [ 0.820774] Demotion targets for Node 0: null vm-test-run-hermes-remote> client # [ 0.821961] Key type .fscrypt registered vm-test-run-hermes-remote> client # [ 0.822854] Key type fscrypt-provisioning registered vm-test-run-hermes-remote> client # [ 0.824113] ima: No TPM chip found, activating TPM-bypass! vm-test-run-hermes-remote> client # [ 0.825343] ima: Allocated hash algorithm: sha1 vm-test-run-hermes-remote> client # [ 0.826436] ima: No architecture policies found vm-test-run-hermes-remote> client # [ 0.827674] PM: Magic number: 10:336:45 vm-test-run-hermes-remote> client # [ 0.829401] RAS: Correctable Errors collector initialized. vm-test-run-hermes-remote> client # [ 0.833596] clk: Disabling unused clocks vm-test-run-hermes-remote> client # [ 0.834647] PM: genpd: Disabling unused power domains vm-test-run-hermes-remote> server # [ 0.840590] pci 0000:00:01.0: vgaarb: setting as boot VGA device vm-test-run-hermes-remote> server # [ 0.841409] pci 0000:00:01.0: vgaarb: bridge control possible vm-test-run-hermes-remote> server # [ 0.841409] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vm-test-run-hermes-remote> server # [ 0.841422] vgaarb: loaded vm-test-run-hermes-remote> server # [ 0.842474] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 vm-test-run-hermes-remote> server # [ 0.843414] hpet0: 3 comparators, 64-bit 100.000000 MHz counter vm-test-run-hermes-remote> server # [ 0.847527] clocksource: Switched to clocksource kvm-clock vm-test-run-hermes-remote> server # [ 0.850761] VFS: Disk quotas dquot_6.6.0 vm-test-run-hermes-remote> server # [ 0.851722] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-hermes-remote> server # [ 0.853449] pnp: PnP ACPI init vm-test-run-hermes-remote> server # [ 0.854392] ACPI: IRQ 4 override to edge(!), high(!) vm-test-run-hermes-remote> server # [ 0.855655] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved vm-test-run-hermes-remote> server # [ 0.857602] pnp: PnP ACPI: found 6 devices vm-test-run-hermes-remote> server # [ 0.865294] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns vm-test-run-hermes-remote> server # [ 0.867211] clocksource: Switched to clocksource acpi_pm vm-test-run-hermes-remote> server # [ 0.868503] NET: Registered PF_INET protocol family vm-test-run-hermes-remote> server # [ 0.870629] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) vm-test-run-hermes-remote> server # [ 0.884949] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) vm-test-run-hermes-remote> server # [ 0.886875] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.888648] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-hermes-remote> server # [ 0.892083] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) vm-test-run-hermes-remote> server # [ 0.893807] TCP: Hash tables configured (established 65536 bind 65536) vm-test-run-hermes-remote> server # [ 0.895573] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear) vm-test-run-hermes-remote> server # [ 0.897471] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.899180] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear) vm-test-run-hermes-remote> server # [ 0.901065] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-hermes-remote> server # [ 0.902446] NET: Registered PF_XDP protocol family vm-test-run-hermes-remote> server # [ 0.903736] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] vm-test-run-hermes-remote> server # [ 0.905207] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] vm-test-run-hermes-remote> server # [ 0.906762] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] vm-test-run-hermes-remote> server # [ 0.908288] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] vm-test-run-hermes-remote> server # [ 0.909952] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] vm-test-run-hermes-remote> server # [ 0.911544] pci_bus 0000:00: resource 9 [mem 0xe0000000000-0xe07ffffffff window] vm-test-run-hermes-remote> server # [ 0.913893] ACPI: \_SB_.GSIA: Enabled at IRQ 16 vm-test-run-hermes-remote> server # [ 0.916296] ACPI: \_SB_.GSIB: Enabled at IRQ 17 vm-test-run-hermes-remote> server # [ 0.918655] ACPI: \_SB_.GSIC: Enabled at IRQ 18 vm-test-run-hermes-remote> server # [ 0.920848] ACPI: \_SB_.GSID: Enabled at IRQ 19 vm-test-run-hermes-remote> server # [ 0.922684] PCI: CLS 0 bytes, default 64 vm-test-run-hermes-remote> server # [ 0.923712] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) vm-test-run-hermes-remote> server # [ 0.923976] Trying to unpack rootfs image as initramfs... vm-test-run-hermes-remote> server # [ 0.925108] software IO TLB: mapped [mem 0x000000007a348000-0x000000007e348000] (64MB) vm-test-run-hermes-remote> server # [ 0.925302] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d2fa06f4, max_idle_ns: 440795322535 ns vm-test-run-hermes-remote> server # [ 0.948603] Initialise system trusted keyrings vm-test-run-hermes-remote> server # [ 0.950045] workingset: timestamp_bits=40 max_order=21 bucket_order=0 vm-test-run-hermes-remote> server # [ 0.960397] Key type asymmetric registered vm-test-run-hermes-remote> client # [ 0.967275] Freeing initrd memory: 29196K vm-test-run-hermes-remote> server # [ 0.961362] Asymmetric key parser 'x509' registered vm-test-run-hermes-remote> server # [ 0.962610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) vm-test-run-hermes-remote> client # [ 0.971167] Freeing unused decrypted memory: 2028K vm-test-run-hermes-remote> server # [ 0.964566] io scheduler mq-deadline registered vm-test-run-hermes-remote> server # [ 0.965665] io scheduler kyber registered vm-test-run-hermes-remote> client # [ 0.974574] Freeing unused kernel image (initmem) memory: 3644K vm-test-run-hermes-remote> client # [ 0.976020] Write protecting the kernel read-only data: 32768k vm-test-run-hermes-remote> server # [ 0.970119] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-hermes-remote> client # [ 0.978171] Freeing unused kernel image (text/rodata gap) memory: 1216K vm-test-run-hermes-remote> server # [ 0.971849] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A vm-test-run-hermes-remote> client # [ 0.980150] Freeing unused kernel image (rodata/data gap) memory: 756K vm-test-run-hermes-remote> server # [ 0.974697] Linux agpgart interface v0.103 vm-test-run-hermes-remote> server # [ 0.975729] ACPI: bus type drm_connector registered vm-test-run-hermes-remote> server # [ 0.978001] usbcore: registered new interface driver usbserial_generic vm-test-run-hermes-remote> server # [ 0.979422] usbserial: USB Serial support registered for generic vm-test-run-hermes-remote> server # [ 0.980736] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. vm-test-run-hermes-remote> server # [ 0.980736] Please enable it if your BIOS has the CPPC option. vm-test-run-hermes-remote> server # [ 0.983738] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled vm-test-run-hermes-remote> server # [ 0.985560] drop_monitor: Initializing network drop monitor service vm-test-run-hermes-remote> server # [ 0.987085] NET: Registered PF_INET6 protocol family vm-test-run-hermes-remote> server # [ 0.989114] Segment Routing with IPv6 vm-test-run-hermes-remote> server # [ 0.990065] In-situ OAM (IOAM) with IPv6 vm-test-run-hermes-remote> server # [ 0.992763] IPI shorthand broadcast: enabled vm-test-run-hermes-remote> server # [ 0.996668] sched_clock: Marking stable (782017395, 214362873)->(1113794567, -117414299) vm-test-run-hermes-remote> server # [ 0.998825] registered taskstats version 1 vm-test-run-hermes-remote> server # [ 1.000087] Loading compiled-in X.509 certificates vm-test-run-hermes-remote> server # [ 1.009003] Demotion targets for Node 0: null vm-test-run-hermes-remote> client # [ 1.015652] x86/mm: Checked W+X mappings: passed, no W+X pages found. vm-test-run-hermes-remote> client # [ 1.017184] Run /init as init process vm-test-run-hermes-remote> server # [ 1.010431] Key type .fscrypt registered vm-test-run-hermes-remote> server # [ 1.011416] Key type fscrypt-provisioning registered vm-test-run-hermes-remote> server # [ 1.012808] ima: No TPM chip found, activating TPM-bypass! vm-test-run-hermes-remote> server # [ 1.014043] ima: Allocated hash algorithm: sha1 vm-test-run-hermes-remote> server # [ 1.015222] ima: No architecture policies found vm-test-run-hermes-remote> server # [ 1.016692] PM: Magic number: 10:336:45 vm-test-run-hermes-remote> server # [ 1.018613] RAS: Correctable Errors collector initialized. vm-test-run-hermes-remote> client # [ 1.026405] systemd[1]: Inserted module 'autofs4' vm-test-run-hermes-remote> server # [ 1.022814] clk: Disabling unused clocks vm-test-run-hermes-remote> server # [ 1.023762] PM: genpd: Disabling unused power domains vm-test-run-hermes-remote> client # [ 1.043758] fuse: init (API version 7.45) vm-test-run-hermes-remote> client # [ 1.049883] ACPI: \_SB_.GSIG: Enabled at IRQ 22 vm-test-run-hermes-remote> client # [ 1.052773] ACPI: \_SB_.GSIH: Enabled at IRQ 23 vm-test-run-hermes-remote> client # [ 1.056647] ACPI: \_SB_.GSIE: Enabled at IRQ 20 vm-test-run-hermes-remote> client # [ 1.059767] ACPI: \_SB_.GSIF: Enabled at IRQ 21 vm-test-run-hermes-remote> client # [ 1.091641] systemd[1]: Successfully made /usr/ read-only. vm-test-run-hermes-remote> server # [ 1.178138] Freeing initrd memory: 29216K vm-test-run-hermes-remote> server # [ 1.182082] Freeing unused decrypted memory: 2028K vm-test-run-hermes-remote> server # [ 1.185079] Freeing unused kernel image (initmem) memory: 3644K vm-test-run-hermes-remote> server # [ 1.186635] Write protecting the kernel read-only data: 32768k vm-test-run-hermes-remote> server # [ 1.188799] Freeing unused kernel image (text/rodata gap) memory: 1216K vm-test-run-hermes-remote> server # [ 1.190698] Freeing unused kernel image (rodata/data gap) memory: 756K vm-test-run-hermes-remote> server # [ 1.226007] x86/mm: Checked W+X mappings: passed, no W+X pages found. vm-test-run-hermes-remote> server # [ 1.227515] Run /init as init process vm-test-run-hermes-remote> server # [ 1.239151] systemd[1]: Inserted module 'autofs4' vm-test-run-hermes-remote> server # [ 1.266620] fuse: init (API version 7.45) vm-test-run-hermes-remote> server # [ 1.272883] ACPI: \_SB_.GSIG: Enabled at IRQ 22 vm-test-run-hermes-remote> server # [ 1.275897] ACPI: \_SB_.GSIH: Enabled at IRQ 23 vm-test-run-hermes-remote> server # [ 1.279571] ACPI: \_SB_.GSIE: Enabled at IRQ 20 vm-test-run-hermes-remote> server # [ 1.282478] ACPI: \_SB_.GSIF: Enabled at IRQ 21 vm-test-run-hermes-remote> server # [ 1.317724] systemd[1]: Successfully made /usr/ read-only. vm-test-run-hermes-remote> client # [ 1.427745] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> client # [ 1.433946] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> client # [ 1.435047] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> client # [ 1.436147] systemd[1]: Running in initrd. vm-test-run-hermes-remote> client # [ 1.437347] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> client # [ 1.438808] systemd[1]: Hostname set to . vm-test-run-hermes-remote> client # [ 1.523647] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> client # [ 1.553097] systemd[1]: Queued start job for default target Initrd Default Target. vm-test-run-hermes-remote> client # [ 1.560547] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-hermes-remote> client # [ 1.562077] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 1.572412] systemd[1]: Expecting device /dev/disk/by-label/nixos... vm-test-run-hermes-remote> client # [ 1.573853] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> client # [ 1.575038] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> client # [ 1.576215] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> client # [ 1.577297] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> client # [ 1.578562] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 1.580157] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-hermes-remote> client # [ 1.581641] systemd[1]: Listening on Journal Sockets. vm-test-run-hermes-remote> client # [ 1.583045] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> client # [ 1.584398] systemd[1]: Listening on udev Kernel Socket. vm-test-run-hermes-remote> client # [ 1.585633] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> client # [ 1.587932] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> client # [ 1.590987] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-hermes-remote> client # [ 1.595733] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> client # [ 1.602993] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> client # [ 1.613006] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> client # [ 1.615045] netfs: FS-Cache loaded vm-test-run-hermes-remote> client # [ 1.617085] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 1.622867] 9pnet: Installing 9P2000 support vm-test-run-hermes-remote> client # [ 1.624181] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> client # [ 1.628926] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 1.632758] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 1.640584] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-hermes-remote> client # [ 1.642718] systemd-journald[76]: Collecting audit messages is disabled. vm-test-run-hermes-remote> client # [ 1.643773] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 1.651437] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> client # [ 1.655609] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config vm-test-run-hermes-remote> client # [ 1.665843] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 1.654489] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> server # [ 1.661359] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> server # [ 1.662532] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> server # [ 1.663694] systemd[1]: Running in initrd. vm-test-run-hermes-remote> server # [ 1.664971] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> client # [ 1.671074] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. vm-test-run-hermes-remote> server # [ 1.666486] systemd[1]: Hostname set to . vm-test-run-hermes-remote> client # [ 1.680966] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev vm-test-run-hermes-remote> client # [ 1.689579] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> client # [ 1.694059] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> client # [ 1.700066] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> client # [ 1.507339] systemd-modules-load[77]: Using 2 probe threads vm-test-run-hermes-remote> client # [ 1.509067] systemd-modules-load[77]: Inserted module 'virtio_balloon' vm-test-run-hermes-remote> client # [ 1.510611] systemd-modules-load[77]: Inserted module 'virtio_gpu'[ 1.707651] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # [ 1.513179] systemd-modules-load[77]: Inserted module 'dm_mod' vm-test-run-hermes-remote> client # [ 1.517305] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> client # [ 1.522152] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> client # [ 1.536615] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 1.538118] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> client # [ 1.539908] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> client # [ 1.542875] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 1.544533] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> client # [ 1.561530] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 1.755413] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> client # [ 1.567156] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 1.568550] systemd-udevd[93]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> client # [ 1.583428] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> client # [ 1.585775] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> client # [ 1.587112] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 1.785565] systemd[1]: Queued start job for default target Initrd Default Target. vm-test-run-hermes-remote> server # [ 1.804848] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-hermes-remote> server # [ 1.806408] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 1.808209] systemd[1]: Expecting device /dev/disk/by-label/nixos... vm-test-run-hermes-remote> server # [ 1.809712] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> server # [ 1.810875] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> server # [ 1.812060] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> server # [ 1.813137] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> server # [ 1.814465] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 1.816047] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-hermes-remote> server # [ 1.817533] systemd[1]: Listening on Journal Sockets. vm-test-run-hermes-remote> server # [ 1.818839] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 1.820152] systemd[1]: Listening on udev Kernel Socket. vm-test-run-hermes-remote> server # [ 1.821428] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> server # [ 1.823876] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 1.826433] systemd[1]: Starting Load Kernel Module 9pnet_virtio... vm-test-run-hermes-remote> server # [ 1.835413] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 1.840478] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 1.842997] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> server # [ 1.844496] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 1.847968] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 1.854159] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 1.864274] netfs: FS-Cache loaded vm-test-run-hermes-remote> server # [ 1.867328] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. vm-test-run-hermes-remote> server # [ 1.867574] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 1.867949] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev vm-test-run-hermes-remote> server # [ 1.870628] systemd-journald[91]: Collecting audit messages is disabled. vm-test-run-hermes-remote> server # [ 1.873945] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 1.874595] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config vm-test-run-hermes-remote> server # [ 1.882528] 9pnet: Installing 9P2000 support vm-test-run-hermes-remote> server # [ 1.886472] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 1.892863] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 1.899127] systemd[1]: Finished Load Kernel Module 9pnet_virtio. vm-test-run-hermes-remote> server # [ 1.901764] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 1.905200] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 1.907553] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 1.911463] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 1.916552] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> client # [ 1.923850] virtio_blk virtio5: 2/0/0 default/read/poll queues vm-test-run-hermes-remote> server # [ 1.920083] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 1.921728] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 1.923441] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> client # [ 1.931799] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-hermes-remote> server # [ 1.926006] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> client # [ 1.933818] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 vm-test-run-hermes-remote> server # [ 1.713586] s[ 1.928187] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> server # ystemd-modules-load[93]: Using 4 probe threads vm-test-run-hermes-remote> server # [ 1.716164] systemd-modules-load[93]: Inserted module 'virtio_balloon' vm-test-run-hermes-remote> server # [ 1.717495] systemd-modules-load[93]: Inserted module 'dm_mod' vm-test-run-hermes-remote> client # [ 1.938741] serio: i8042 KBD port at 0x60,0x64 irq 1 vm-test-run-hermes-remote> client # [ 1.939744] serio: i8042 AUX port at 0x60,0x64 irq 12 vm-test-run-hermes-remote> server # [ 1.718738] systemd-modules-load[93]: Inserted module 'virtio_gpu' vm-test-run-hermes-remote> server # [ 1.719970] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 1.950742] ehci-pci 0000:00:1d.7: EHCI Host Controller vm-test-run-hermes-remote> client # [ 1.951684] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 vm-test-run-hermes-remote> client # [ 1.953996] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 vm-test-run-hermes-remote> server # [ 1.733625] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 1.735108] systemd-udevd[105]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> client # [ 1.962107] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 vm-test-run-hermes-remote> client # [ 1.964264] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 vm-test-run-hermes-remote> client # [ 1.965677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> server # [ 1.744953] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> client # [ 1.968805] usb usb1: Product: EHCI Host Controller vm-test-run-hermes-remote> client # [ 1.969826] usb usb1: Manufacturer: Linux 6.18.45 ehci_hcd vm-test-run-hermes-remote> client # [ 1.971307] usb usb1: SerialNumber: 0000:00:1d.7 vm-test-run-hermes-remote> client # [ 1.972789] hub 1-0:1.0: USB hub found vm-test-run-hermes-remote> client # [ 1.974156] hub 1-0:1.0: 6 ports detected vm-test-run-hermes-remote> server # [ 1.754588] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 1.975932] uhci_hcd 0000:00:1d.0: UHCI Host Controller vm-test-run-hermes-remote> server # [ 1.755691] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> server # [ 1.756735] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> client # [ 1.977952] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 vm-test-run-hermes-remote> client # [ 1.979981] uhci_hcd 0000:00:1d.0: detected 2 ports vm-test-run-hermes-remote> client # [ 1.981227] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200 vm-test-run-hermes-remote> client # [ 1.796190] (udev-worker)[108]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 1.998624] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> client # [ 2.000290] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 1.806386] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 1.816310] (udev-worker)[104]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> client # [ 2.012931] usb usb2: Product: UHCI Host Controller vm-test-run-hermes-remote> client # [ 1.819973] (udev-worker)[104]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 2.021925] usb usb2: Manufacturer: Linux 6.18.45 uhci_hcd vm-test-run-hermes-remote> client # [ 2.022864] usb usb2: SerialNumber: 0000:00:1d.0 vm-test-run-hermes-remote> client # [ 2.026514] SCSI subsystem initialized vm-test-run-hermes-remote> client # [ 2.028375] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 vm-test-run-hermes-remote> client # [ 1.844372] systemd-vconsole-setup[116]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> client # [ 1.847331] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> client # [ 2.044630] hub 2-0:1.0: USB hub found vm-test-run-hermes-remote> client # [ 2.045413] hub 2-0:1.0: 2 ports detected vm-test-run-hermes-remote> client # [ 1.851757] systemd[1]: Found device /dev/disk/by-label/nixos. vm-test-run-hermes-remote> client # [ 2.049518] uhci_hcd 0000:00:1d.1: UHCI Host Controller vm-test-run-hermes-remote> client # [ 1.855728] systemd[1]: Reached target Initrd Root Device. vm-test-run-hermes-remote> client # [ 2.052277] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 vm-test-run-hermes-remote> client # [ 1.858393] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... vm-test-run-hermes-remote> client # [ 2.055172] uhci_hcd 0000:00:1d.1: detected 2 ports vm-test-run-hermes-remote> client # [ 2.056796] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220 vm-test-run-hermes-remote> client # [ 2.058452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> client # [ 2.060229] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 2.061942] usb usb3: Product: UHCI Host Controller vm-test-run-hermes-remote> client # [ 2.063403] usb usb3: Manufacturer: Linux 6.18.45 uhci_hcd vm-test-run-hermes-remote> client # [ 2.064693] usb usb3: SerialNumber: 0000:00:1d.1 vm-test-run-hermes-remote> client # [ 2.066034] hub 3-0:1.0: USB hub found vm-test-run-hermes-remote> client # [ 2.066874] hub 3-0:1.0: 2 ports detected vm-test-run-hermes-remote> client # [ 2.069818] uhci_hcd 0000:00:1d.2: UHCI Host Controller vm-test-run-hermes-remote> client # [ 2.071025] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 vm-test-run-hermes-remote> client # [ 2.074722] uhci_hcd 0000:00:1d.2: detected 2 ports vm-test-run-hermes-remote> client # [ 2.075807] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240 vm-test-run-hermes-remote> client # [ 2.079163] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> client # [ 2.082686] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 1.888819] systemd-fsck[123]: nixos: clean, 12/65536 files, 13019/262144 blocks vm-test-run-hermes-remote> client # [ 2.086341] usb usb4: Product: UHCI Host Controller vm-test-run-hermes-remote> client # [ 2.087637] usb usb4: Manufacturer: Linux 6.18.45 uhci_hcd vm-test-run-hermes-remote> client # [ 2.088106] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode vm-test-run-hermes-remote> client # [ 2.089238] usb usb4: SerialNumber: 0000:00:1d.2 vm-test-run-hermes-remote> client # [ 2.090263] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) vm-test-run-hermes-remote> client # [ 2.091144] hub 4-0:1.0: USB hub found vm-test-run-hermes-remote> client # [ 2.091764] ahci 0000:00:1f.2: flags: 64bit ncq only vm-test-run-hermes-remote> client # [ 2.093264] hub 4-0:1.0: 2 ports detected vm-test-run-hermes-remote> client # [ 2.098033] scsi host0: ahci vm-test-run-hermes-remote> client # [ 2.099458] scsi host1: ahci vm-test-run-hermes-remote> server # [ 2.092634] virtio_blk virtio5: 4/0/0 default/read/poll queues vm-test-run-hermes-remote> client # [ 2.101418] scsi host2: ahci vm-test-run-hermes-remote> server # [ 2.095058] uhci_hcd 0000:00:1d.0: UHCI Host Controller vm-test-run-hermes-remote> server # [ 2.098900] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 vm-test-run-hermes-remote> client # [ 2.106768] scsi host3: ahci vm-test-run-hermes-remote> server # [ 2.100502] uhci_hcd 0000:00:1d.0: detected 2 ports vm-test-run-hermes-remote> client # [ 2.109220] scsi host4: ahci vm-test-run-hermes-remote> server # [ 2.103119] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200 vm-test-run-hermes-remote> client # [ 2.112058] scsi host5: ahci vm-test-run-hermes-remote> server # [ 2.104649] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> server # [ 2.106186] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> client # [ 2.113256] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 45 lpm-pol 1 vm-test-run-hermes-remote> server # [ 2.107479] usb usb1: Product: UHCI Host Controller vm-test-run-hermes-remote> server # [ 2.108448] usb usb1: Manufacturer: Linux 6.18.45 uhci_hcd vm-test-run-hermes-remote> client # [ 2.114949] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 45 lpm-pol 1 vm-test-run-hermes-remote> server # [ 2.109406] usb usb1: SerialNumber: 0000:00:1d.0 vm-test-run-hermes-remote> client # [ 2.116621] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 45 lpm-pol 1 vm-test-run-hermes-remote> client # [ 2.118259] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 45 lpm-pol 1 vm-test-run-hermes-remote> client # [ 2.119929] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 45 lpm-pol 1 vm-test-run-hermes-remote> client # [ 2.121564] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 45 lpm-pol 1 vm-test-run-hermes-remote> server # [ 2.124889] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 vm-test-run-hermes-remote> server # [ 2.126024] hub 1-0:1.0: USB hub found vm-test-run-hermes-remote> server # [ 2.127432] hub 1-0:1.0: 2 ports detected vm-test-run-hermes-remote> server # [ 2.127619] serio: i8042 KBD port at 0x60,0x64 irq 1 vm-test-run-hermes-remote> server # [ 2.129452] serio: i8042 AUX port at 0x60,0x64 irq 12 vm-test-run-hermes-remote> server # [ 2.132409] virtio_blk virtio5: [vda] 50331648 512-byte logical blocks (25.8 GB/24.0 GiB) vm-test-run-hermes-remote> server # [ 2.139181] ehci-pci 0000:00:1d.7: EHCI Host Controller vm-test-run-hermes-remote> server # [ 2.140353] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 vm-test-run-hermes-remote> server # [ 2.142041] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 vm-test-run-hermes-remote> server # [ 2.148439] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 vm-test-run-hermes-remote> server # [ 2.150157] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 vm-test-run-hermes-remote> server # [ 2.151834] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> server # [ 2.153298] usb usb2: Product: EHCI Host Controller vm-test-run-hermes-remote> server # [ 2.154344] usb usb2: Manufacturer: Linux 6.18.45 ehci_hcd vm-test-run-hermes-remote> server # [ 2.155493] usb usb2: SerialNumber: 0000:00:1d.7 vm-test-run-hermes-remote> client # [ 1.970972] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. vm-test-run-hermes-remote> server # [ 2.167532] hub 2-0:1.0: USB hub found vm-test-run-hermes-remote> server # [ 2.168820] hub 2-0:1.0: 6 ports detected vm-test-run-hermes-remote> server # [ 1.960819] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 2.195521] hub 1-0:1.0: USB hub found vm-test-run-hermes-remote> server # [ 2.196341] hub 1-0:1.0: 2 ports detected vm-test-run-hermes-remote> server # [ 2.197514] uhci_hcd 0000:00:1d.1: UHCI Host Controller vm-test-run-hermes-remote> server # [ 2.198485] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 vm-test-run-hermes-remote> server # [ 1.986586] systemd-vconsole-setup[144]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> server # [ 1.989321] (udev-worker)[120]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> server # [ 1.991384] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 2.207213] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 vm-test-run-hermes-remote> client # [ 2.214985] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-hermes-remote> server # [ 2.208726] uhci_hcd 0000:00:1d.1: detected 2 ports vm-test-run-hermes-remote> server # [ 2.208888] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220 vm-test-run-hermes-remote> server # [ 2.211260] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> server # [ 1.998896] (udev-worker)[126]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> server # [ 2.212975] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> server # [ 2.002368] (udev-worker)[126]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> server # [ 2.219071] usb usb3: Product: UHCI Host Controller vm-test-run-hermes-remote> server # [ 2.220282] usb usb3: Manufacturer: Linux 6.18.45 uhci_hcd vm-test-run-hermes-remote> server # [ 2.224405] usb usb3: SerialNumber: 0000:00:1d.1 vm-test-run-hermes-remote> server # [ 2.011506] systemd[1]: Found device /dev/disk/by-label/nixos. vm-test-run-hermes-remote> server # [ 2.013243] systemd[1]: Reach[ 2.227515] hub 3-0:1.0: USB hub found vm-test-run-hermes-remote> server # ed target Initrd Root Device. vm-test-run-hermes-remote> server # [ 2.228783] hub 3-0:1.0: 2 ports detected vm-test-run-hermes-remote> server # [ 2.015892] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... vm-test-run-hermes-remote> server # [ 2.232662] SCSI subsystem initialized vm-test-run-hermes-remote> server # [ 2.232800] uhci_hcd 0000:00:1d.2: UHCI Host Controller vm-test-run-hermes-remote> server # [ 2.234566] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 vm-test-run-hermes-remote> server # [ 2.235962] uhci_hcd 0000:00:1d.2: detected 2 ports vm-test-run-hermes-remote> server # [ 2.237181] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240 vm-test-run-hermes-remote> server # [ 2.238627] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-hermes-remote> server # [ 2.240142] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-hermes-remote> server # [ 2.240144] usb usb4: Product: UHCI Host Controller vm-test-run-hermes-remote> server # [ 2.240148] usb usb4: Manufacturer: Linux 6.18.45 uhci_hcd vm-test-run-hermes-remote> server # [ 2.240149] usb usb4: SerialNumber: 0000:00:1d.2 vm-test-run-hermes-remote> server # [ 2.240477] hub 4-0:1.0: USB hub found vm-test-run-hermes-remote> server # [ 2.245339] hub 4-0:1.0: 2 ports detected vm-test-run-hermes-remote> server # [ 2.043728] systemd-fsck[152]: nixos: clean, 12/1572864 files, 142772/6291456 blocks vm-test-run-hermes-remote> server # [ 2.264693] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode vm-test-run-hermes-remote> server # [ 2.052544] systemd[1]: Finis[ 2.266710] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) vm-test-run-hermes-remote> server # hed File System Check on /dev/disk/by-label/nixo[ 2.268358] ahci 0000:00:1f.2: flags: 64bit ncq only vm-test-run-hermes-remote> server # s. vm-test-run-hermes-remote> server # [ 2.273257] scsi host0: ahci vm-test-run-hermes-remote> server # [ 2.274331] scsi host1: ahci vm-test-run-hermes-remote> server # [ 2.275450] scsi host2: ahci vm-test-run-hermes-remote> server # [ 2.276402] scsi host3: ahci vm-test-run-hermes-remote> server # [ 2.277313] scsi host4: ahci vm-test-run-hermes-remote> server # [ 2.278297] scsi host5: ahci vm-test-run-hermes-remote> server # [ 2.279448] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 47 lpm-pol 1 vm-test-run-hermes-remote> server # [ 2.281322] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 47 lpm-pol 1 vm-test-run-hermes-remote> server # [ 2.283210] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 47 lpm-pol 1 vm-test-run-hermes-remote> server # [ 2.284747] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 47 lpm-pol 1 vm-test-run-hermes-remote> server # [ 2.286159] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 47 lpm-pol 1 vm-test-run-hermes-remote> server # [ 2.287601] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 47 lpm-pol 1 vm-test-run-hermes-remote> client # [ 2.344845] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 vm-test-run-hermes-remote> client # [ 2.346371] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 vm-test-run-hermes-remote> client # [ 2.347743] usb 1-1: Product: QEMU USB Tablet vm-test-run-hermes-remote> client # [ 2.348596] usb 1-1: Manufacturer: QEMU vm-test-run-hermes-remote> client # [ 2.349364] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1 vm-test-run-hermes-remote> client # [ 2.363280] hid: raw HID events driver (C) Jiri Kosina vm-test-run-hermes-remote> server # [ 2.411429] usb 2-1: new high-speed USB device number 2 using ehci-pci vm-test-run-hermes-remote> client # [ 2.445884] ata1: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.447042] ata2: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.448185] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) vm-test-run-hermes-remote> client # [ 2.449447] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 vm-test-run-hermes-remote> client # [ 2.450462] ata3.00: applying bridge limits vm-test-run-hermes-remote> client # [ 2.451470] ata4: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.452697] ata5: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.453887] ata6: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> client # [ 2.454967] ata3.00: configured for UDMA/100 vm-test-run-hermes-remote> client # [ 2.456119] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 vm-test-run-hermes-remote> client # [ 2.494945] usbcore: registered new interface driver usbhid vm-test-run-hermes-remote> client # [ 2.495815] usbhid: USB HID core driver vm-test-run-hermes-remote> client # [ 2.500718] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 vm-test-run-hermes-remote> client # [ 2.502623] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 vm-test-run-hermes-remote> client # [ 2.506133] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray vm-test-run-hermes-remote> client # [ 2.530073] cdrom: Uniform CD-ROM driver Revision: 3.20 vm-test-run-hermes-remote> server # [ 2.542440] usb 2-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 vm-test-run-hermes-remote> server # [ 2.544026] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 vm-test-run-hermes-remote> server # [ 2.545441] usb 2-1: Product: QEMU USB Tablet vm-test-run-hermes-remote> server # [ 2.546291] usb 2-1: Manufacturer: QEMU vm-test-run-hermes-remote> server # [ 2.547076] usb 2-1: SerialNumber: 28754-0000:00:1d.7-1 vm-test-run-hermes-remote> server # [ 2.561939] hid: raw HID events driver (C) Jiri Kosina vm-test-run-hermes-remote> server # [ 2.608982] ata1: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.610421] ata6: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.611667] ata2: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.612823] ata4: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.614017] ata5: SATA link down (SStatus 0 SControl 300) vm-test-run-hermes-remote> server # [ 2.615166] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) vm-test-run-hermes-remote> server # [ 2.616328] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 vm-test-run-hermes-remote> server # [ 2.617314] ata3.00: applying bridge limits vm-test-run-hermes-remote> server # [ 2.618212] ata3.00: configured for UDMA/100 vm-test-run-hermes-remote> client # [ 2.431177] systemd[1]: Mounting /sysroot... vm-test-run-hermes-remote> server # [ 2.619504] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 vm-test-run-hermes-remote> server # [ 2.659689] usbcore: registered new interface driver usbhid vm-test-run-hermes-remote> server # [ 2.660839] usbhid: USB HID core driver vm-test-run-hermes-remote> server # [ 2.665222] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input2 vm-test-run-hermes-remote> server # [ 2.667164] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 vm-test-run-hermes-remote> server # [ 2.676697] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray vm-test-run-hermes-remote> server # [ 2.726682] cdrom: Uniform CD-ROM driver Revision: 3.20 vm-test-run-hermes-remote> client # [ 2.822471] EXT4-fs (vda): mounted filesystem 081d5a54-3f64-477a-b748-d66530247874 r/w with ordered data mode. Quota mode: none. vm-test-run-hermes-remote> client # [ 2.632739] systemd[1]: Mounted /sysroot. vm-test-run-hermes-remote> client # [ 2.636962] systemd[1]: Reached target Initrd Root File System. vm-test-run-hermes-remote> client # [ 2.644755] systemd[1]: Mounting /sysroot/nix/.ro-store... vm-test-run-hermes-remote> client # [ 2.650734] systemd[1]: Mounting /sysroot/nix/.rw-store... vm-test-run-hermes-remote> client # [ 2.658188] systemd[1]: Mounting /sysroot/run... vm-test-run-hermes-remote> client # [ 2.662216] systemd[1]: Mounting /sysroot/tmp/shared... vm-test-run-hermes-remote> client # [ 2.861421] 9p: Installing v9fs 9p2000 file system support vm-test-run-hermes-remote> server # [ 2.644842] systemd[1]: Mounting /sysroot... vm-test-run-hermes-remote> client # [ 2.671289] systemd[1]: Mounting /sysroot/tmp/xchg... vm-test-run-hermes-remote> client # [ 2.678197] systemd[1]: Starting Mountpoints Configured in the Real Root... vm-test-run-hermes-remote> client # [ 2.694739] systemd[1]: Mounted /sysroot/nix/.ro-store. vm-test-run-hermes-remote> client # [ 2.699681] systemd[1]: Mounted /sysroot/nix/.rw-store. vm-test-run-hermes-remote> client # [ 2.702837] systemd[1]: Mounted /sysroot/run. vm-test-run-hermes-remote> client # [ 2.706845] systemd-sysroot-fstab-check[165]: /sysroot should be mounted in the initrd, will request daemon-reload. vm-test-run-hermes-remote> client # [ 2.710780] systemd[1]: Reload requested from client PID 165 ('systemd-sysroot') (unit initrd-parse-etc.service)... vm-test-run-hermes-remote> client # [ 2.715857] systemd[1]: Reloading... vm-test-run-hermes-remote> client # [ 2.806575] systemd[1]: Reloading finished in 95 ms. vm-test-run-hermes-remote> client # [ 2.853813] systemd-sysroot-fstab-check[165]: Requesting initrd-fs.target/start/replace... vm-test-run-hermes-remote> client # [ 2.855797] systemd[1]: Mounted /sysroot/tmp/shared. vm-test-run-hermes-remote> client # [ 2.856947] systemd[1]: Mounted /sysroot/tmp/xchg. vm-test-run-hermes-remote> client # [ 2.864617] systemd-sysroot-fstab-check[165]: Requesting swap.target/start/replace... vm-test-run-hermes-remote> client # [ 2.871225] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> client # [ 2.876474] systemd[1]: initrd-parse-etc.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 2.878823] systemd[1]: Finished Mountpoints Configured in the Real Root. vm-test-run-hermes-remote> client # [ 2.880410] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. vm-test-run-hermes-remote> client # [ 2.890192] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 2.891961] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 3.221837] EXT4-fs (vda): mounted filesystem 617e88ef-edb6-4186-a28c-a1c920557a12 r/w with ordered data mode. Quota mode: none. vm-test-run-hermes-remote> server # [ 3.019229] systemd[1]: Mounted /sysroot. vm-test-run-hermes-remote> server # [ 3.020369] systemd[1]: Reached target Initrd Root File System. vm-test-run-hermes-remote> server # [ 3.050294] systemd[1]: Mounting /sysroot/nix/.ro-store... vm-test-run-hermes-remote> server # [ 3.068418] systemd[1]: Mounting /sysroot/nix/.rw-store... vm-test-run-hermes-remote> server # [ 3.075932] systemd[1]: Mounting /sysroot/run... vm-test-run-hermes-remote> server # [ 3.102372] systemd[1]: Mounting /sysroot/tmp/shared... vm-test-run-hermes-remote> server # [ 3.106186] systemd[1]: Mounting /sysroot/tmp/xchg... vm-test-run-hermes-remote> server # [ 3.132042] systemd[1]: Starting Mountpoints Configured in the Real Root... vm-test-run-hermes-remote> server # [ 3.148590] systemd[1]: Mounted /sysroot/nix/.rw-store. vm-test-run-hermes-remote> server # [ 3.364307] 9p: Installing v9fs 9p2000 file system support vm-test-run-hermes-remote> server # [ 3.153957] systemd[1]: Mounted /sysroot/run. vm-test-run-hermes-remote> server # [ 3.160102] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 3.195983] systemd-sysroot-fstab-check[194]: /sysroot should be mounted in the initrd, will request daemon-reload. vm-test-run-hermes-remote> server # [ 3.230741] systemd[1]: Mounted /sysroot/tmp/shared. vm-test-run-hermes-remote> server # [ 3.237035] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.239411] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 3.242661] systemd[1]: Mounted /sysroot/nix/.ro-store. vm-test-run-hermes-remote> server # [ 3.250103] systemd[1]: Reload requested from client PID 194 ('systemd-sysroot') (unit initrd-parse-etc.service)... vm-test-run-hermes-remote> server # [ 3.254440] systemd[1]: Reloading... vm-test-run-hermes-remote> server # [ 3.316188] systemd[1]: Reloading finished in 91 ms. vm-test-run-hermes-remote> server # [ 3.338357] systemd-sysroot-fstab-check[194]: Requesting initrd-fs.target/start/replace... vm-test-run-hermes-remote> server # [ 3.340072] systemd[1]: Mounted /sysroot/tmp/xchg. vm-test-run-hermes-remote> server # [ 3.342060] systemd-sysroot-fstab-check[194]: Requesting swap.target/start/replace... vm-test-run-hermes-remote> server # [ 3.344472] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 3.345785] systemd[1]: initrd-parse-etc.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.347262] systemd[1]: Finished Mountpoints Configured in the Real Root. vm-test-run-hermes-remote> server # [ 3.348648] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. vm-test-run-hermes-remote> server # [ 3.361086] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.362476] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> client # [ 3.431929] systemd[1]: Mounting /sysroot/nix/store... vm-test-run-hermes-remote> client # [ 3.452439] systemd[1]: Mounted /sysroot/nix/store. vm-test-run-hermes-remote> client # [ 3.454473] systemd[1]: Reached target Initrd File Systems. vm-test-run-hermes-remote> client # [ 3.456694] systemd[1]: Starting Find NixOS closure... vm-test-run-hermes-remote> client # [ 3.457978] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-hermes-remote> client # [ 3.470383] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> client # [ 3.471837] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.479067] systemd[1]: Finished Find NixOS closure. vm-test-run-hermes-remote> client # [ 3.481084] systemd[1]: Reached target Initrd Default Target. vm-test-run-hermes-remote> client # [ 3.482460] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-hermes-remote> client # [ 3.493298] systemd[1]: Stopped target Initrd Default Target. vm-test-run-hermes-remote> client # [ 3.494730] systemd[1]: Stopped target Basic System. vm-test-run-hermes-remote> client # [ 3.495906] systemd[1]: Stopped target Initrd Root Device. vm-test-run-hermes-remote> client # [ 3.497184] systemd[1]: Stopped target Path Units. vm-test-run-hermes-remote> client # [ 3.498218] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.499583] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 3.501045] systemd[1]: Stopped target Slice Units. vm-test-run-hermes-remote> client # [ 3.502067] systemd[1]: Stopped target Socket Units. vm-test-run-hermes-remote> client # [ 3.503078] systemd[1]: Stopped target System Initialization. vm-test-run-hermes-remote> client # [ 3.504277] systemd[1]: Stopped target Swaps. vm-test-run-hermes-remote> client # [ 3.507068] systemd[1]: Stopped target Timer Units. vm-test-run-hermes-remote> client # [ 3.508546] systemd[1]: dbus.socket: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.509862] systemd[1]: Closed D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 3.511212] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.513394] systemd[1]: Stopped Find NixOS closure. vm-test-run-hermes-remote> client # [ 3.514370] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio vm-test-run-hermes-remote> client # [ 3.516513] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> client # [ 3.517864] systemd[1]: systemd-sysctl.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.520209] systemd[1]: Stopped Apply Kernel Variables. vm-test-run-hermes-remote> client # [ 3.521285] systemd[1]: systemd-modules-load.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.522639] systemd[1]: Stopped Load Kernel Modules. vm-test-run-hermes-remote> client # [ 3.523668] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.525114] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> client # [ 3.526541] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.527994] systemd[1]: Stopped Create System Files and Directories. vm-test-run-hermes-remote> client # [ 3.529273] systemd[1]: Stopped target Local File Systems. vm-test-run-hermes-remote> client # [ 3.530421] systemd[1]: Stopped target Preparation for Local File Systems. vm-test-run-hermes-remote> client # [ 3.531849] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.533445] systemd[1]: Stopped Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 3.534843] systemd[1]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> client # [ 3.538890] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.540728] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> client # [ 3.541803] systemd[1]: initrd-cleanup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.543102] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. vm-test-run-hermes-remote> client # [ 3.544387] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.545657] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> client # [ 3.546684] systemd[1]: systemd-udevd.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.547841] systemd[1]: Stopped Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> client # [ 3.549194] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.550426] systemd[1]: Closed udev Control Socket. vm-test-run-hermes-remote> client # [ 3.551325] systemd[1]: Starting Cleanup udev Database... vm-test-run-hermes-remote> client # [ 3.553145] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.554558] systemd[1]: Stopped Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 3.555735] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.557242] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> client # [ 3.558570] systemd[1]: kmod-static-nodes.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.560333] systemd[1]: Stopped Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 3.561457] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.562732] systemd[1]: Finished Cleanup udev Database. vm-test-run-hermes-remote> client # [ 3.563686] systemd[1]: Reached target Switch Root. vm-test-run-hermes-remote> client # [ 3.564573] systemd[1]: Starting NixOS Activation... vm-test-run-hermes-remote> server # [ 3.640998] systemd[1]: Mounting /sysroot/nix/store... vm-test-run-hermes-remote> client # [ 3.669461] initrd-nixos-activation-start[210]: booting system configuration /nix/store/c5cjyv1jk7s9f4bmhqqm4f741ssgxszp-nixos-system-client-test vm-test-run-hermes-remote> server # [ 3.668631] systemd[1]: Mounted /sysroot/nix/store. vm-test-run-hermes-remote> server # [ 3.669743] systemd[1]: Reached target Initrd File Systems. vm-test-run-hermes-remote> server # [ 3.671113] systemd[1]: Starting Find NixOS closure... vm-test-run-hermes-remote> server # [ 3.672113] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-hermes-remote> server # [ 3.685346] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 3.686713] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. vm-test-run-hermes-remote> client # [ 3.714561] initrd-nixos-activation-start[210]: running activation script... vm-test-run-hermes-remote> server # [ 3.690180] systemd[1]: Finished Find NixOS closure. vm-test-run-hermes-remote> server # [ 3.691382] systemd[1]: Reached target Initrd Default Target. vm-test-run-hermes-remote> server # [ 3.693057] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-hermes-remote> server # [ 3.707122] systemd[1]: Stopped target Initrd Default Target. vm-test-run-hermes-remote> server # [ 3.708213] systemd[1]: Stopped target Basic System. vm-test-run-hermes-remote> server # [ 3.709224] systemd[1]: Stopped target Initrd Root Device. vm-test-run-hermes-remote> server # [ 3.710718] systemd[1]: Stopped target Path Units. vm-test-run-hermes-remote> server # [ 3.711732] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.714097] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 3.715569] systemd[1]: Stopped target Slice Units. vm-test-run-hermes-remote> server # [ 3.716949] systemd[1]: Stopped target Socket Units. vm-test-run-hermes-remote> server # [ 3.718695] systemd[1]: Stopped target System Initialization. vm-test-run-hermes-remote> server # [ 3.721315] systemd[1]: Stopped target Swaps. vm-test-run-hermes-remote> server # [ 3.722274] systemd[1]: Stopped target Timer Units. vm-test-run-hermes-remote> server # [ 3.723262] systemd[1]: dbus.socket: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.724419] systemd[1]: Closed D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 3.725592] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.726922] systemd[1]: Stopped Find NixOS closure. vm-test-run-hermes-remote> server # [ 3.727918] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio vm-test-run-hermes-remote> server # [ 3.730148] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-hermes-remote> server # [ 3.731304] systemd[1]: systemd-sysctl.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.732503] systemd[1]: Stopped Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 3.733478] systemd[1]: systemd-modules-load.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.734742] systemd[1]: Stopped Load Kernel Modules. vm-test-run-hermes-remote> server # [ 3.735711] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.737101] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 3.738461] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.739715] systemd[1]: Stopped Create System Files and Directories. vm-test-run-hermes-remote> server # [ 3.740825] systemd[1]: Stopped target Local File Systems. vm-test-run-hermes-remote> server # [ 3.741808] systemd[1]: Stopped target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 3.743051] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.744431] systemd[1]: Stopped Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 3.745409] systemd[1]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 3.746688] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.747968] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 3.748905] systemd[1]: initrd-cleanup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.750104] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. vm-test-run-hermes-remote> server # [ 3.751240] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.752478] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-hermes-remote> server # [ 3.753626] systemd[1]: systemd-udevd.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.754842] systemd[1]: Stopped Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 3.756143] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.757414] systemd[1]: Closed udev Control Socket. vm-test-run-hermes-remote> server # [ 3.758305] systemd[1]: Starting Cleanup udev Database... vm-test-run-hermes-remote> server # [ 3.759295] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.760628] systemd[1]: Stopped Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 3.761724] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.763140] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 3.765347] systemd[1]: kmod-static-nodes.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.766603] systemd[1]: Stopped Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 3.767819] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 3.769122] systemd[1]: Finished Cleanup udev Database. vm-test-run-hermes-remote> server # [ 3.770072] systemd[1]: Reached target Switch Root. vm-test-run-hermes-remote> server # [ 3.770975] systemd[1]: Starting NixOS Activation... vm-test-run-hermes-remote> server # [ 3.891885] initrd-nixos-activation-start[241]: booting system configuration /nix/store/zdk330y6g0ska4plad5g5m4plncdvs1s-nixos-system-server-test vm-test-run-hermes-remote> server # [ 3.939759] initrd-nixos-activation-start[241]: running activation script... vm-test-run-hermes-remote> client # [ 4.039693] initrd-nixos-activation-start[233]: setting up /etc... vm-test-run-hermes-remote> client # [ 4.202787] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 4.204326] systemd[1]: Finished NixOS Activation. vm-test-run-hermes-remote> client # [ 4.205417] systemd[1]: Starting Switch Root... vm-test-run-hermes-remote> client # [ 4.216850] systemd[1]: Switching root. vm-test-run-hermes-remote> client # [ 4.454358] systemd-journald[76]: Received SIGTERM from PID 1 (systemd). vm-test-run-hermes-remote> server # [ 4.244362] initrd-nixos-activation-start[264]: setting up /etc... vm-test-run-hermes-remote> client # [ 4.650457] NET: Registered PF_VSOCK protocol family vm-test-run-hermes-remote> server # [ 4.440098] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 4.441582] systemd[1]: Finished NixOS Activation. vm-test-run-hermes-remote> server # [ 4.442540] systemd[1]: Starting Switch Root... vm-test-run-hermes-remote> server # [ 4.456592] systemd[1]: Switching root. vm-test-run-hermes-remote> server # [ 4.727596] systemd-journald[91]: Received SIGTERM from PID 1 (systemd). vm-test-run-hermes-remote> server # [ 4.852206] NET: Registered PF_VSOCK protocol family vm-test-run-hermes-remote> client # [ 5.029978] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> client # [ 5.035138] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> client # [ 5.036081] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> client # [ 5.037079] systemd[1]: Detected first boot. vm-test-run-hermes-remote> client # [ 5.040621] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> client # [ 5.159702] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> server # [ 5.228029] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-hermes-remote> client # [ 5.239180] systemd[1]: Applying preset policy. vm-test-run-hermes-remote> server # [ 5.232677] systemd[1]: Detected virtualization kvm. vm-test-run-hermes-remote> server # [ 5.233710] systemd[1]: Detected architecture x86-64. vm-test-run-hermes-remote> server # [ 5.234658] systemd[1]: Detected first boot. vm-test-run-hermes-remote> server # [ 5.237581] systemd[1]: Initializing machine ID from random generator. vm-test-run-hermes-remote> server # [ 5.361432] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-hermes-remote> server # [ 5.439869] systemd[1]: Applying preset policy. vm-test-run-hermes-remote> client # [ 6.164728] systemd[1]: Populated /etc with preset unit settings. vm-test-run-hermes-remote> server # [ 6.382752] systemd[1]: Populated /etc with preset unit settings. vm-test-run-hermes-remote> client # [ 6.543857] systemd[1]: initrd-switch-root.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 6.545855] systemd[1]: Stopped initrd-switch-root.service. vm-test-run-hermes-remote> client # [ 6.548801] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. vm-test-run-hermes-remote> client # [ 6.551686] systemd[1]: Created slice Slice /system/getty. vm-test-run-hermes-remote> client # [ 6.562616] systemd[1]: Created slice User and Session Slice. vm-test-run-hermes-remote> client # [ 6.563742] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> client # [ 6.565226] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-hermes-remote> client # [ 6.566553] systemd[1]: Expecting device /dev/hvc0... vm-test-run-hermes-remote> client # [ 6.567509] systemd[1]: Expecting device /dev/ttyS0... vm-test-run-hermes-remote> client # [ 6.568525] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-hermes-remote> client # [ 6.569685] systemd[1]: Stopped target initrd-fs.target. vm-test-run-hermes-remote> client # [ 6.570677] systemd[1]: Stopped target initrd-root-fs.target. vm-test-run-hermes-remote> client # [ 6.571714] systemd[1]: Stopped target initrd-switch-root.target. vm-test-run-hermes-remote> client # [ 6.572865] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-hermes-remote> client # [ 6.574102] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> client # [ 6.575064] systemd[1]: Reached target Remote File Systems. vm-test-run-hermes-remote> client # [ 6.576114] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> client # [ 6.577073] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> client # [ 6.579822] systemd[1]: Listening on Query the User Interactively for a Password. vm-test-run-hermes-remote> client # [ 6.583039] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-hermes-remote> client # [ 6.585452] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-hermes-remote> client # [ 6.587887] systemd[1]: Listening on Factory Reset Management. vm-test-run-hermes-remote> client # [ 6.589100] systemd[1]: Listening on Hostname Service Socket. vm-test-run-hermes-remote> client # [ 6.592431] systemd[1]: Starting Journal Log Access Socket... vm-test-run-hermes-remote> client # [ 6.594146] systemd[1]: Listening on Journal Audit Socket. vm-test-run-hermes-remote> client # [ 6.596738] systemd[1]: Listening on Console Output Muting Service Socket. vm-test-run-hermes-remote> client # [ 6.598303] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-hermes-remote> client # [ 6.599894] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 6.601519] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki vm-test-run-hermes-remote> client # [ 6.608339] systemd[1]: Listening on Disk Repartitioning Service Socket. vm-test-run-hermes-remote> client # [ 6.609612] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> client # [ 6.610754] systemd[1]: Listening on udev Varlink Socket. vm-test-run-hermes-remote> client # [ 6.613864] systemd[1]: Mounting Huge Pages File System... vm-test-run-hermes-remote> client # [ 6.616667] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-hermes-remote> client # [ 6.622271] systemd[1]: Mounting Kernel Debug File System... vm-test-run-hermes-remote> client # [ 6.633793] systemd[1]: Mounting Kernel Trace File System... vm-test-run-hermes-remote> client # [ 6.638214] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> client # [ 6.640233] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio vm-test-run-hermes-remote> client # [ 6.647526] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> client # [ 6.649696] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm vm-test-run-hermes-remote> client # [ 6.651818] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> client # [ 6.654437] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> client # [ 6.658732] systemd[1]: Mounting FUSE Control File System... vm-test-run-hermes-remote> server # [ 6.651086] systemd[1]: microvm@hermes-alice.service: Service uses a combination of Type=simple, ExecStartPost=, and credentials. This could lead to race conditions. Continuing. vm-test-run-hermes-remote> client # [ 6.660332] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> client # [ 6.673285] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> client # [ 6.682980] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> client # [ 6.694684] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-hermes-remote> client # [ 6.703441] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-hermes-remote> client # [ 6.705125] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 6.710712] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> client # [ 6.720557] systemd[1]: Listening on Journal Log Access Socket. vm-test-run-hermes-remote> client # [ 6.720895] systemd-journald[303]: Collecting audit messages is enabled. vm-test-run-hermes-remote> client # [ 6.723286] systemd[1]: Mounted Huge Pages File System. vm-test-run-hermes-remote> client # [ 6.724569] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-hermes-remote> client # [ 6.728258] systemd[1]: Mounted Kernel Debug File System. vm-test-run-hermes-remote> client # [ 6.731159] systemd[1]: Mounted Kernel Trace File System. vm-test-run-hermes-remote> client # [ 6.734386] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 6.737101] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 6.741404] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> client # [ 6.743617] systemd[1]: Mounted FUSE Control File System. vm-test-run-hermes-remote> client # [ 6.748004] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-hermes-remote> client # [ 6.555239] systemd[1]: Queued start job for default target Multi-User System.[ 6.752667] EXT4-fs (vda): re-mounted 081d5a54-3f64-477a-b748-d66530247874. vm-test-run-hermes-remote> client # [ 6.755012] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> client # [ 6.755068] loop: module loaded vm-test-run-hermes-remote> client # vm-test-run-hermes-remote> client # [ 6.758243] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> client # [ 6.562947] systemd[1]: systemd-journald.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 6.568963] systemd-modules-load[305]: Using 2 probe threads vm-test-run-hermes-remote> client # [ 6.571752] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-hermes-remote> client # [ 6.574448] systemd[1]: Listening on Disk Image Download Service Socket. vm-test-run-hermes-remote> client # [ 6.577872] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-hermes-remote> client # [ 6.582513] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> client # [ 6.589187] systemd-modules-load[305]: Inserted module 'loop' vm-test-run-hermes-remote> client # [ 6.591640] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-hermes-remote> client # [ 6.593988] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 6.785192] systemd[1]: initrd-switch-root.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 6.787269] systemd[1]: Stopped initrd-switch-root.service. vm-test-run-hermes-remote> server # [ 6.789930] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. vm-test-run-hermes-remote> client # [ 6.601702] systemd-oomd[306]: No swap; memory pressure usage will be degraded vm-test-run-hermes-remote> server # [ 6.792306] systemd[1]: Created slice Slice /system/getty. vm-test-run-hermes-remote> server # [ 6.793989] systemd[1]: Created slice Slice /system/microvm. vm-test-run-hermes-remote> client # [ 6.604891] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 6.795582] systemd[1]: Created slice Slice /system/microvm-macvtap-interfaces. vm-test-run-hermes-remote> server # [ 6.797544] systemd[1]: Created slice Slice /system/microvm-pci-devices. vm-test-run-hermes-remote> server # [ 6.799330] systemd[1]: Created slice Slice /system/microvm-set-booted. vm-test-run-hermes-remote> client # [ 6.610086] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-hermes-remote> server # [ 6.801094] systemd[1]: Created slice Slice /system/microvm-tap-interfaces. vm-test-run-hermes-remote> server # [ 6.802904] systemd[1]: Created slice Slice /system/microvm-virtiofsd. vm-test-run-hermes-remote> client # [ 6.614550] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-hermes-remote> server # [ 6.804658] systemd[1]: Created slice User and Session Slice. vm-test-run-hermes-remote> server # [ 6.805749] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 6.807190] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-hermes-remote> client # [ 6.619295] systemd[1]: Starting Firewall... vm-test-run-hermes-remote> server # [ 6.808626] systemd[1]: Expecting device /dev/hvc0... vm-test-run-hermes-remote> server # [ 6.809552] systemd[1]: Expecting device /dev/ttyS0... vm-test-run-hermes-remote> server # [ 6.810544] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-hermes-remote> server # [ 6.811622] systemd[1]: Stopped target initrd-fs.target. vm-test-run-hermes-remote> server # [ 6.812572] systemd[1]: Stopped target initrd-root-fs.target. vm-test-run-hermes-remote> client # [ 6.623975] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 6.813580] systemd[1]: Stopped target initrd-switch-root.target. vm-test-run-hermes-remote> server # [ 6.814684] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-hermes-remote> server # [ 6.815860] systemd[1]: Reached target Remote File Systems. vm-test-run-hermes-remote> server # [ 6.816900] systemd[1]: Reached target Slice Units. vm-test-run-hermes-remote> server # [ 6.817845] systemd[1]: Reached target Swaps. vm-test-run-hermes-remote> server # [ 6.820817] systemd[1]: Listening on Query the User Interactively for a Password. vm-test-run-hermes-remote> client # [ 6.830105] systemd-journald[303]: Received client request to flush runtime journal. vm-test-run-hermes-remote> server # [ 6.824183] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-hermes-remote> server # [ 6.826969] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-hermes-remote> server # [ 6.829578] systemd[1]: Listening on Factory Reset Management. vm-test-run-hermes-remote> server # [ 6.830825] systemd[1]: Listening on Hostname Service Socket. vm-test-run-hermes-remote> server # [ 6.834250] systemd[1]: Starting Journal Log Access Socket... vm-test-run-hermes-remote> server # [ 6.836013] systemd[1]: Listening on Journal Audit Socket. vm-test-run-hermes-remote> server # [ 6.838719] systemd[1]: Listening on Console Output Muting Service Socket. vm-test-run-hermes-remote> server # [ 6.840556] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-hermes-remote> server # [ 6.842340] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 6.844134] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki vm-test-run-hermes-remote> server # [ 6.851162] systemd[1]: Listening on Disk Repartitioning Service Socket. vm-test-run-hermes-remote> server # [ 6.852491] systemd[1]: Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 6.853629] systemd[1]: Listening on udev Varlink Socket. vm-test-run-hermes-remote> server # [ 6.856807] systemd[1]: Mounting Huge Pages File System... vm-test-run-hermes-remote> server # [ 6.859852] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-hermes-remote> server # [ 6.862906] systemd[1]: Mounting Kernel Debug File System... vm-test-run-hermes-remote> server # [ 6.869705] systemd[1]: Mounting Kernel Trace File System... vm-test-run-hermes-remote> server # [ 6.873477] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 6.875810] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio vm-test-run-hermes-remote> server # [ 6.881174] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 6.882843] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm vm-test-run-hermes-remote> server # [ 6.885126] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> server # [ 6.887024] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> server # [ 6.907010] systemd[1]: Mounting FUSE Control File System... vm-test-run-hermes-remote> server # [ 6.909025] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> server # [ 6.918060] systemd[1]: Starting Journal Service... vm-test-run-hermes-remote> client # [ 6.732484] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 6.922220] systemd[1]: Starting Load Kernel Modules... vm-test-run-hermes-remote> client # [ 6.736252] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 6.926774] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-hermes-remote> client # [ 6.740685] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-hermes-remote> server # [ 6.930640] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-hermes-remote> client # [ 6.743294] systemd[1]: Reached target First Boot Complete. vm-test-run-hermes-remote> client # [ 6.744941] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 6.933352] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 6.746190] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> client # [ 6.747802] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 6.937772] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> client # [ 6.749732] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> client # [ 6.751504] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-hermes-remote> server # [ 6.941930] systemd[1]: Listening on Journal Log Access Socket. vm-test-run-hermes-remote> server # [ 6.943562] systemd[1]: Mounted Huge Pages File System. vm-test-run-hermes-remote> server # [ 6.945696] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-hermes-remote> server # [ 6.947185] systemd[1]: Mounted Kernel Debug File System. vm-test-run-hermes-remote> server # [ 6.949556] systemd[1]: Mounted Kernel Trace File System. vm-test-run-hermes-remote> server # [ 6.954000] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> client # [ 6.766228] systemd-udevd[335]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> server # [ 6.956234] systemd[1]: Mounted FUSE Control File System. vm-test-run-hermes-remote> server # [ 6.959239] systemd-journald[334]: Collecting audit messages is enabled. vm-test-run-hermes-remote> server # [ 6.961969] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 6.964457] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 6.964782] EXT4-fs (vda): re-mounted 617e88ef-edb6-4186-a28c-a1c920557a12. vm-test-run-hermes-remote> server # [ 6.967964] loop: module loaded vm-test-run-hermes-remote> server # [ 6.969531] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-hermes-remote> server # [ 6.974419] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> client # [ 6.788705] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 6.981072] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-hermes-remote> server # [ 6.981765] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-hermes-remote> server # [ 6.769462] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-hermes-remote> server # [ 6.983677] systemd[1]: Started Journal Service. vm-test-run-hermes-remote> server # [ 6.771251] systemd[1]: systemd-journald.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 6.775448] systemd-modules-load[335]: Using 4 probe threads vm-test-run-hermes-remote> server # [ 6.777862] systemd-modules-load[335]: Inserted module 'tap' vm-test-run-hermes-remote> server # [ 6.779428] systemd-modules-load[335]: Inserted module 'loop' vm-test-run-hermes-remote> server # [ 6.780645] systemd-modules-load[335]: Inserted module 'vhost_vsock' vm-test-run-hermes-remote> server # [ 6.781944] systemd-modules-load[335]: Inserted module 'vhost_net' vm-test-run-hermes-remote> server # [ 6.783355] systemd[1]: Listening on Disk Image Download Service Socket. vm-test-run-hermes-remote> server # [ 6.785229] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-hermes-remote> server # [ 6.787278] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> server # [ 6.789953] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-hermes-remote> server # [ 6.793378] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 6.796471] systemd-oomd[337]: No swap; memory pressure usage will be degraded vm-test-run-hermes-remote> server # [ 6.800694] systemd[1]: Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 6.802128] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-hermes-remote> server # [ 6.807188] systemd[1]: Starting Firewall... vm-test-run-hermes-remote> server # [ 6.811159] systemd[1]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 6.813435] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-hermes-remote> server # [ 7.034734] systemd-journald[334]: Received client request to flush runtime journal. vm-test-run-hermes-remote> client # [ 6.847150] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 6.879616] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-hermes-remote> server # [ 6.881457] systemd[1]: Reached target First Boot Complete. vm-test-run-hermes-remote> server # [ 6.882970] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 6.884756] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 6.886624] systemd[1]: Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 6.887952] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-hermes-remote> server # [ 6.901829] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 6.903164] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 6.905328] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 6.906900] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-hermes-remote> client # [ 6.955195] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> server # [ 6.960546] systemd-udevd[372]: Using default interface naming scheme 'v261'. vm-test-run-hermes-remote> client # [ 6.996739] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. vm-test-run-hermes-remote> client # [ 7.015749] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. vm-test-run-hermes-remote> client # [ 7.018527] (udev-worker)[375]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 7.028470] (udev-worker)[383]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> client # [ 7.033466] (udev-worker)[383]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 7.063573] systemd[1]: Condition check resulted in Virtio network device being skipped. vm-test-run-hermes-remote> server # [ 7.038300] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> client # [ 7.065114] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> client # [ 7.068220] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> client # [ 7.076400] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> client # [ 7.079001] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 7.080944] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> client # [ 7.341887] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console vm-test-run-hermes-remote> server # [ 7.138048] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-hermes-remote> client # [ 7.347199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 vm-test-run-hermes-remote> client # [ 7.356803] ACPI: button: Power Button [PWRF] vm-test-run-hermes-remote> client # [ 7.359095] mousedev: PS/2 mouse device common for all mice vm-test-run-hermes-remote> client # [ 7.371764] Console: switching to colour dummy device 80x25 vm-test-run-hermes-remote> client # [ 7.375424] [drm] Found bochs VGA, ID 0xb0c5. vm-test-run-hermes-remote> client # [ 7.375426] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. vm-test-run-hermes-remote> client # [ 7.380580] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic vm-test-run-hermes-remote> client # [ 7.383986] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 vm-test-run-hermes-remote> server # [ 7.162774] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. vm-test-run-hermes-remote> server # [ 7.173554] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. vm-test-run-hermes-remote> client # [ 7.397550] Console: switching to colour frame buffer device 160x50 vm-test-run-hermes-remote> client # [ 7.400311] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device vm-test-run-hermes-remote> server # [ 7.182331] (udev-worker)[415]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 7.404847] rtc_cmos 00:04: RTC can wake from S4 vm-test-run-hermes-remote> client # [ 7.409846] rtc_cmos 00:04: registered as rtc0 vm-test-run-hermes-remote> server # [ 7.184475] (udev-worker)[430]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-hermes-remote> client # [ 7.410858] rtc_cmos 00:04: setting system clock to 2026-09-15T21:02:12 UTC (1789506132) vm-test-run-hermes-remote> client # [ 7.412418] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs vm-test-run-hermes-remote> server # [ 7.190255] (udev-worker)[430]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-hermes-remote> client # [ 7.415764] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized vm-test-run-hermes-remote> client # [ 7.418339] parport_pc 00:02: reported by Plug and Play ACPI vm-test-run-hermes-remote> client # [ 7.420948] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] vm-test-run-hermes-remote> client # [ 7.424839] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4 vm-test-run-hermes-remote> server # [ 7.203844] systemd[1]: Condition check resulted in Virtio network device being skipped. vm-test-run-hermes-remote> server # [ 7.205690] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-hermes-remote> server # [ 7.207677] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-hermes-remote> server # [ 7.210728] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-hermes-remote> server # [ 7.213400] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 7.215397] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-hermes-remote> server # [ 7.456863] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console vm-test-run-hermes-remote> client # [ 7.468973] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt vm-test-run-hermes-remote> client # [ 7.469898] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD vm-test-run-hermes-remote> client # [ 7.474749] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 vm-test-run-hermes-remote> client # [ 7.476711] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 vm-test-run-hermes-remote> server # [ 7.470134] Console: switching to colour dummy device 80x25 vm-test-run-hermes-remote> server # [ 7.471168] [drm] Found bochs VGA, ID 0xb0c5. vm-test-run-hermes-remote> server # [ 7.471170] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. vm-test-run-hermes-remote> server # [ 7.474946] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic vm-test-run-hermes-remote> server # [ 7.475935] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 vm-test-run-hermes-remote> server # [ 7.480559] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 vm-test-run-hermes-remote> server # [ 7.482587] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized vm-test-run-hermes-remote> server # [ 7.489606] ACPI: button: Power Button [PWRF] vm-test-run-hermes-remote> server # [ 7.490116] Console: switching to colour frame buffer device 160x50 vm-test-run-hermes-remote> server # [ 7.492796] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device vm-test-run-hermes-remote> client # [ 7.333084] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 7.522945] rtc_cmos 00:04: RTC can wake from S4 vm-test-run-hermes-remote> server # [ 7.530016] parport_pc 00:02: reported by Plug and Play ACPI vm-test-run-hermes-remote> server # [ 7.532640] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] vm-test-run-hermes-remote> server # [ 7.537057] rtc_cmos 00:04: registered as rtc0 vm-test-run-hermes-remote> server # [ 7.537960] rtc_cmos 00:04: setting system clock to 2026-09-15T21:02:12 UTC (1789506132) vm-test-run-hermes-remote> server # [ 7.540293] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4 vm-test-run-hermes-remote> server # [ 7.541612] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs vm-test-run-hermes-remote> client # [ 7.352775] systemd[1]: Mounting /run/wrappers... vm-test-run-hermes-remote> server # [ 7.568819] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt vm-test-run-hermes-remote> server # [ 7.570096] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD vm-test-run-hermes-remote> client # [ 7.382616] systemd[1]: Mounted /run/wrappers. vm-test-run-hermes-remote> server # [ 7.575059] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 vm-test-run-hermes-remote> client # [ 7.387156] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> client # [ 7.389756] systemd[1]: Listening on Boot Loader Control Service Socket. vm-test-run-hermes-remote> server # [ 7.579884] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 vm-test-run-hermes-remote> client # [ 7.392136] systemd[1]: Starting register-nix-paths.service... vm-test-run-hermes-remote> client # [ 7.395637] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-hermes-remote> client # [ 7.398079] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-hermes-remote> client # [ 7.405437] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-hermes-remote> client # [ 7.414723] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 7.615984] ppdev: user-space parallel port driver vm-test-run-hermes-remote> client # [ 7.433633] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 7.438211] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 7.639016] mousedev: PS/2 mouse device common for all mice vm-test-run-hermes-remote> client # [ 7.453746] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 7.652215] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) vm-test-run-hermes-remote> client # [ 7.466692] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-hermes-remote> client # [ 7.474244] systemd[1]: Finished Firewall. vm-test-run-hermes-remote> client # [ 7.481278] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-hermes-remote> server # [ 7.468513] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> client # [ 7.698869] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) vm-test-run-hermes-remote> server # [ 7.705811] ppdev: user-space parallel port driver vm-test-run-hermes-remote> client # [ 7.516964] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> client # [ 7.523513] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-hermes-remote> server # [ 7.714594] iTCO_wdt iTCO_wdt.0.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) vm-test-run-hermes-remote> client # [ 7.528509] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-hermes-remote> server # [ 7.719248] iTCO_wdt iTCO_wdt.0.auto: initialized. heartbeat=30 sec (nowayout=0) vm-test-run-hermes-remote> server # [ 7.508120] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 7.512307] systemd[1]: Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 7.515862] systemd[1]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 7.739221] kvm_amd: TSC scaling supported vm-test-run-hermes-remote> server # [ 7.739956] kvm_amd: Nested Virtualization enabled vm-test-run-hermes-remote> server # [ 7.740767] kvm_amd: Nested Paging enabled vm-test-run-hermes-remote> server # [ 7.741339] kvm_amd: LBR virtualization supported vm-test-run-hermes-remote> server # [ 7.742225] kvm_amd: Virtual GIF supported vm-test-run-hermes-remote> server # [ 7.742966] kvm_amd: Virtual NMI enabled vm-test-run-hermes-remote> client # [ 7.572488] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-hermes-remote> server # [ 7.572683] systemd[1]: Mounting /run/wrappers... vm-test-run-hermes-remote> client # [ 7.600356] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-hermes-remote> server # [ 7.790028] EDAC MC: Ver: 3.0.0 vm-test-run-hermes-remote> client # [ 7.604873] systemd[1]: Starting Update is Completed... vm-test-run-hermes-remote> server # [ 7.598277] systemd[1]: Mounted /run/wrappers. vm-test-run-hermes-remote> server # [ 7.599584] systemd[1]: Reached target Local File Systems. vm-test-run-hermes-remote> server # [ 7.602058] systemd[1]: Listening on Boot Loader Control Service Socket. vm-test-run-hermes-remote> server # [ 7.603738] systemd[1]: Starting register-nix-paths.service... vm-test-run-hermes-remote> server # [ 7.605808] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-hermes-remote> server # [ 7.607789] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-hermes-remote> client # [ 7.634518] systemd[1]: Finished Update is Completed. vm-test-run-hermes-remote> server # [ 7.610420] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-hermes-remote> server # [ 7.617383] systemd[1]: Starting Create System Files and Directories... vm-test-run-hermes-remote> client # [ 7.843533] kvm_amd: TSC scaling supported vm-test-run-hermes-remote> client # [ 7.845047] kvm_amd: Nested Virtualization enabled vm-test-run-hermes-remote> client # [ 7.846557] kvm_amd: Nested Paging enabled vm-test-run-hermes-remote> client # [ 7.847960] kvm_amd: LBR virtualization supported vm-test-run-hermes-remote> client # [ 7.848703] kvm_amd: Virtual GIF supported vm-test-run-hermes-remote> client # [ 7.850176] kvm_amd: Virtual NMI enabled vm-test-run-hermes-remote> server # [ 7.651106] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-hermes-remote> client # [ 7.878703] EDAC MC: Ver: 3.0.0 vm-test-run-hermes-remote> server # [ 7.655335] systemd-tmpfiles[510]: /etc/tmpfiles.d/10-microvm.conf:1: Duplicate line for path "/home/alice/hermes", ignoring. vm-test-run-hermes-remote> server # [ 7.662370] systemd-tmpfiles[510]: /etc/tmpfiles.d/10-microvm.conf:2: Duplicate line for path "/var/lib/hermes-microvm/alice/guest", ignoring. vm-test-run-hermes-remote> server # [ 7.667424] systemd-tmpfiles[510]: /etc/tmpfiles.d/10-microvm.conf:3: Duplicate line for path "/var/lib/hermes-microvm/alice/state-vault/state", ignoring. vm-test-run-hermes-remote> server # [ 7.671574] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-hermes-remote> server # [ 7.673836] systemd[1]: Finished Firewall. vm-test-run-hermes-remote> server # [ 7.676566] systemd[1]: Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 7.679527] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-hermes-remote> server # [ 7.682060] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-hermes-remote> server # [ 7.712414] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-hermes-remote> server # [ 7.732710] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-hermes-remote> server # [ 7.735308] systemd[1]: Starting Update is Completed... vm-test-run-hermes-remote> client # [ 7.784633] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 7.786692] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-hermes-remote> server # [ 7.761667] systemd[1]: Finished Update is Completed. vm-test-run-hermes-remote> client # [ 7.808096] systemd-vconsole-setup[472]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> client # [ 7.811661] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 7.849928] systemd-vconsole-setup[486]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-hermes-remote> server # [ 7.852393] systemd[1]: Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 7.920145] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 7.922358] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-hermes-remote> client # [ 8.045476] systemd[1]: Finished register-nix-paths.service. vm-test-run-hermes-remote> client # [ 8.046897] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> client # [ 8.049423] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-hermes-remote> client # [ 8.051241] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-hermes-remote> client # [ 8.052765] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> client # [ 8.053789] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 8.055056] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-hermes-remote> client # [ 8.056749] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. vm-test-run-hermes-remote> client # [ 8.058684] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> client # [ 8.060324] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> client # [ 8.061491] systemd[1]: Started backdoor.service. vm-test-run-hermes-remote> client # [ 8.063159] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-hermes-remote> client # [ 8.066304] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> client # [ 8.071289] systemd[1]: Starting Post-Boot Actions... vm-test-run-hermes-remote> client # [ 8.073143] systemd[1]: Started Reset console on configuration changes. vm-test-run-hermes-remote> client # [ 8.074849] systemd[1]: Starting resolvconf update... vm-test-run-hermes-remote> client # [ 8.084617] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-hermes-remote> client # [ 8.111593] systemd[1]: Finished Post-Boot Actions. vm-test-run-hermes-remote> client # connecting to host... vm-test-run-hermes-remote> client # [ 8.125313] nsncd[547]: Sep 15 21:02:13.407 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> client # [ 8.129096] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 8.130650] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> client # [ 8.132799] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> client # [ 8.135546] systemd[1]: Starting User Login Management... vm-test-run-hermes-remote> client # [ 8.137184] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-hermes-remote> client # [ 8.176965] dbus-broker-launch[552]: Looking up NSS user entry for 'systemd-timesync'... vm-test-run-hermes-remote> server # [ 8.154462] systemd[1]: Finished register-nix-paths.service. vm-test-run-hermes-remote> server # [ 8.155839] systemd[1]: Reached target System Initialization. vm-test-run-hermes-remote> server # [ 8.157125] systemd[1]: Started hermes-microvm-timezone.path. vm-test-run-hermes-remote> server # [ 8.158352] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-hermes-remote> server # [ 8.159690] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-hermes-remote> server # [ 8.160935] systemd[1]: Reached target Path Units. vm-test-run-hermes-remote> server # [ 8.161895] systemd[1]: Reached target Timer Units. vm-test-run-hermes-remote> server # [ 8.162878] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> client # [ 8.188312] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-hermes-remote> client # [ 8.192036] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-hermes-remote> client # [ 8.193948] dbus-broker-launch[552]: NSS returned no entry for 'systemd-timesync' vm-test-run-hermes-remote> server # [ 8.170556] systemd[1]: Listening on dashboard forward socket for alice. vm-test-run-hermes-remote> client # [ 8.195631] dbus-broker-launch[552]: Invalid user-name in /nix/store/z78s1fqhz9g3hbvh78b7ivvsgqmafns5-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" vm-test-run-hermes-remote> server # [ 8.171908] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-hermes-remote> server # [ 8.174377] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). vm-test-run-hermes-remote> client # [ 8.198703] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 8.175914] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. vm-test-run-hermes-remote> server # [ 8.177815] systemd[1]: Reached target Socket Units. vm-test-run-hermes-remote> client # [ 8.203158] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-hermes-remote> server # [ 8.178909] systemd[1]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 8.179863] systemd[1]: Started backdoor.service. vm-test-run-hermes-remote> client # [ 8.204430] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 8.181048] systemd[1]: Started Enable Kernel Same-Page Merging. vm-test-run-hermes-remote> client # [ 8.207787] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 8.183460] systemd[1]: Starting Owner-match loopback firewall for hermes microvms... vm-test-run-hermes-remote> client # [ 8.213317] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 8.190741] systemd[1]: Starting Install MicroVM 'hermes-alice'... vm-test-run-hermes-remote> client # [ 8.217659] systemd-logind[573]: New seat seat0. vm-test-run-hermes-remote> server # [ 8.192498] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-hermes-remote> client # [ 8.218938] systemd-logind[573]: Watching system buttons on /dev/input/event2 (Power Button) vm-test-run-hermes-remote> server # [ 8.196106] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> client # [ 8.221824] systemd-logind[573]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-hermes-remote> client # [ 8.222636] systemd-logind[573]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) vm-test-run-hermes-remote> server # [ 8.198314] systemd[1]: Starting Post-Boot Actions... vm-test-run-hermes-remote> client # [ 8.223526] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> client # [ 8.224792] systemd[1]: Started User Login Management. vm-test-run-hermes-remote> server # [ 8.201702] systemd[1]: Started Reset console on configuration changes. vm-test-run-hermes-remote> client # [ 8.228090] systemd[1]: Starting linger-users.service... vm-test-run-hermes-remote> client # [ 8.229221] systemd[1]: Started D-Bus System Message Bus. vm-test-run-hermes-remote> server # [ 8.211995] systemd[1]: Starting resolvconf update... vm-test-run-hermes-remote> client # [ 8.241121] dbus-broker-launch[552]: Ready vm-test-run-hermes-remote> server # [ 8.215209] systemd[1]: enable-ksm.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 8.220052] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-hermes-remote> client # [ 8.253813] nsncd[618]: Sep 15 21:02:13.538 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> client # [ 8.257597] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 8.259349] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> client # [ 8.259980] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 8.238789] systemd[1]: Finished Post-Boot Actions. vm-test-run-hermes-remote> server # [ 8.247638] systemd[1]: install-microvm-hermes-alice.service: Deactivated successfully. vm-test-run-hermes-remote> server # connecting to host... vm-test-run-hermes-remote> server # [ 8.251084] systemd[1]: Finished Install MicroVM 'hermes-alice'. vm-test-run-hermes-remote> server # [ 8.253529] systemd[1]: Setup MicroVM 'hermes-alice' devices for passthrough skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/pci-setup vm-test-run-hermes-remote> server # [ 8.258374] systemd[1]: Starting Save MicroVM 'hermes-alice' booted configuration... vm-test-run-hermes-remote> server # [ 8.260787] nsncd[601]: Sep 15 21:02:13.430 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> server # [ 8.267816] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 8.270155] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-hermes-remote> server # [ 8.270969] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 8.273900] systemd[1]: Starting User Login Management... vm-test-run-hermes-remote> server # [ 8.275664] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-hermes-remote> client # [ 8.300410] systemd[1]: Created slice Slice /user/1000. vm-test-run-hermes-remote> client # [ 8.302933] systemd[1]: Starting User Runtime Directory /run/user/1000... vm-test-run-hermes-remote> client # [ 8.318329] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-hermes-remote> client # [ 8.319595] systemd[1]: Finished linger-users.service. vm-test-run-hermes-remote> client # [ 8.325716] systemd[1]: Finished resolvconf update. vm-test-run-hermes-remote> server: connected to guest root shell vm-test-run-hermes-remote> server # [ 8.298748] dbus-broker-launch[608]: Looking up NSS user entry for 'systemd-timesync'... vm-test-run-hermes-remote> client # [ 8.327114] systemd[1]: Reached target Preparation for Network. vm-test-run-hermes-remote> server # [ 8.300633] dbus-broker-launch[608]: NSS returned no entry for 'systemd-timesync' vm-test-run-hermes-remote> server: (connecting took 9.09 seconds) vm-test-run-hermes-remote> client # [ 8.329828] systemd[1]: Starting DHCP Client... vm-test-run-hermes-remote> server: (finished: waiting for the VM to finish booting, in 9.09 seconds) vm-test-run-hermes-remote> server # [ 8.302661] dbus-broker-launch[608]: Invalid user-name in /nix/store/75rnlysrkalhl2q8vgl4wfy8sp9idxzk-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" vm-test-run-hermes-remote> client # [ 8.332793] systemd[1]: Starting Address configuration of eth1... vm-test-run-hermes-remote> client # [ 8.335620] systemd[1]: Starting Extra networking commands.... vm-test-run-hermes-remote> server # [ 8.323661] systemd[1]: Started D-Bus System Message Bus. vm-test-run-hermes-remote> client # [ 8.351658] systemd[1]: Finished User Runtime Directory /run/user/1000. vm-test-run-hermes-remote> server # [ 8.331854] systemd-logind[638]: New seat seat0. vm-test-run-hermes-remote> client # [ 8.357910] systemd[1]: Starting User Manager for UID 1000... vm-test-run-hermes-remote> server # [ 8.339560] systemd-logind[638]: Watching system buttons on /dev/input/event2 (Power Button) vm-test-run-hermes-remote> server # [ 8.341513] systemd-logind[638]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-hermes-remote> server # [ 8.343465] systemd-logind[638]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) vm-test-run-hermes-remote> server # [ 8.344866] dbus-broker-launch[608]: Ready vm-test-run-hermes-remote> server # [ 8.345964] systemd[1]: Started User Login Management. vm-test-run-hermes-remote> client # [ 8.407542] (systemd)[655]: pam_unix(systemd-user:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 8.419650] network-addresses-eth1-start[650]: adding address 192.168.1.1/24... done vm-test-run-hermes-remote> client # [ 8.431813] network-addresses-eth1-start[650]: adding address 2001:db8:1::1/64... done vm-test-run-hermes-remote> server # [ 8.408038] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 8.409124] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-hermes-remote> client # [ 8.436378] systemd-logind[573]: New session '1' of user 'alice' with class 'manager' and type 'unspecified'. vm-test-run-hermes-remote> server # [ 8.410338] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 8.411312] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-hermes-remote> server # [ 8.417736] systemd[1]: Starting linger-users.service... vm-test-run-hermes-remote> server # [ 8.420252] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 8.423577] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 8.427110] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 8.454625] systemd[1]: Finished Address configuration of eth1. vm-test-run-hermes-remote> server # [ 8.435354] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 8.446275] systemd[1]: Finished Owner-match loopback firewall for hermes microvms. vm-test-run-hermes-remote> client # [ 8.472232] systemd[655]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> server # [ 8.448502] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 8.450830] systemd[1]: Finished linger-users.service. vm-test-run-hermes-remote> server # [ 8.458355] systemd[1]: Finished Save MicroVM 'hermes-alice' booted configuration. vm-test-run-hermes-remote> server # [ 8.460671] systemd[1]: Finished resolvconf update. vm-test-run-hermes-remote> server # [ 8.461750] systemd[1]: Reached target Preparation for Network. vm-test-run-hermes-remote> server # [ 8.464717] systemd[1]: Starting DHCP Client... vm-test-run-hermes-remote> server # [ 8.465870] systemd[1]: Setup MicroVM 'hermes-alice' MACVTAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/macvtap-up vm-test-run-hermes-remote> server # [ 8.468866] systemd[1]: Starting VirtioFS daemons for MicroVM 'hermes-alice'... vm-test-run-hermes-remote> server # [ 8.470429] systemd[1]: Starting Address configuration of eth1... vm-test-run-hermes-remote> server # [ 8.474874] systemd[1]: Starting Extra networking commands.... vm-test-run-hermes-remote> client # [ 8.499893] systemd[1]: Finished Extra networking commands.. vm-test-run-hermes-remote> server # [ 8.475737] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> client # [ 8.502289] dhcpcd[661]: dhcpcd-10.3.2 starting vm-test-run-hermes-remote> server # [ 8.476831] nsncd[717]: Sep 15 21:02:13.651 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-hermes-remote> client # [ 8.503750] systemd[1]: Reached target Network. vm-test-run-hermes-remote> server # [ 8.477819] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 8.478718] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-hermes-remote> client # [ 8.506467] dhcpcd[721]: dev: loaded udev vm-test-run-hermes-remote> client # [ 8.507844] systemd[1]: Starting Permit User Sessions... vm-test-run-hermes-remote> client # [ 8.713159] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-hermes-remote> client # [ 8.713771] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-hermes-remote> client # [ 8.521211] systemd[1]: Finished Permit User Sessions. vm-test-run-hermes-remote> client # [ 8.525469] systemd[1]: Started Getty on tty1. vm-test-run-hermes-remote> client # [ 8.527385] systemd[1]: Reached target Login Prompts. vm-test-run-hermes-remote> client # [ 8.544352] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-hermes-remote> server # [ 8.537565] network-addresses-eth1-start[732]: adding address 192.168.1.2/24... done vm-test-run-hermes-remote> server # [ 8.549228] network-addresses-eth1-start[732]: adding address 2001:db8:1::2/64... done vm-test-run-hermes-remote> server # [ 8.560235] dhcpcd[750]: dhcpcd-10.3.2 starting vm-test-run-hermes-remote> server # [ 8.564527] systemd[1]: Finished Address configuration of eth1. vm-test-run-hermes-remote> server # [ 8.569556] dhcpcd[798]: dev: loaded udev vm-test-run-hermes-remote> server # [ 8.807277] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-hermes-remote> server # [ 8.808845] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-hermes-remote> client # [ 8.816672] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-hermes-remote> server # [ 8.597878] systemd[1]: Finished Extra networking commands.. vm-test-run-hermes-remote> server # [ 8.600570] systemd[1]: Reached target Network. vm-test-run-hermes-remote> server # [ 8.602338] systemd[1]: Setup MicroVM 'hermes-alice' TAP interfaces skipped, unmet condition check ConditionPathExists=/var/lib/microvms/hermes-alice/current/bin/tap-up vm-test-run-hermes-remote> server # [ 8.607942] systemd[1]: Starting SSH Daemon... vm-test-run-hermes-remote> server # [ 8.609776] systemd[1]: Starting Permit User Sessions... vm-test-run-hermes-remote> client # [ 8.848029] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-hermes-remote> client # [ 8.849637] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-hermes-remote> client # [ 8.853242] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 vm-test-run-hermes-remote> client # [ 8.855297] cfg80211: failed to load regulatory.db vm-test-run-hermes-remote> server # [ 8.635597] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-hermes-remote> server # [ 8.638215] systemd[1]: Finished Permit User Sessions. vm-test-run-hermes-remote> server # [ 8.640889] systemd[1]: Started Getty on tty1. vm-test-run-hermes-remote> server # [ 8.642297] systemd[1]: Reached target Login Prompts. vm-test-run-hermes-remote> client # [ 8.689035] systemd[655]: Queued start job for default target Main User Target. vm-test-run-hermes-remote> server # [ 8.666421] sshd[819]: Server listening on 0.0.0.0 port 22. vm-test-run-hermes-remote> server # [ 8.667465] sshd[819]: Server listening on :: port 22. vm-test-run-hermes-remote> server # [ 8.668421] systemd[1]: Started SSH Daemon. vm-test-run-hermes-remote> client # [ 8.694440] systemd[655]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> client # [ 8.699511] systemd[655]: Created slice User Application Slice. vm-test-run-hermes-remote> client # [ 8.700881] systemd[655]: Started Daily Cleanup of User's Temporary Directories. vm-test-run-hermes-remote> client # [ 8.702588] systemd[655]: Reached target Paths. vm-test-run-hermes-remote> client # [ 8.704082] systemd[655]: Reached target Timers. vm-test-run-hermes-remote> client # [ 8.705119] systemd[655]: Starting D-Bus User Message Bus Socket... vm-test-run-hermes-remote> client # [ 8.709672] systemd[655]: Starting Create User Files and Directories... vm-test-run-hermes-remote> client # [ 8.922336] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-hermes-remote> client # [ 8.728606] dhcpcd[721]: eth0: waiting for carrier vm-test-run-hermes-remote> client # [ 8.730180] dhcpcd[721]: eth0: carrier acquired vm-test-run-hermes-remote> client # [ 8.739628] dhcpcd[721]: DUID 00:01:00:01:32:3c:6e:d6:52:54:00:12:34:56 vm-test-run-hermes-remote> client # [ 8.740337] dhcpcd[721]: eth0: IAID 00:12:34:56 vm-test-run-hermes-remote> client # [ 8.741058] dhcpcd[721]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-hermes-remote> client # [ 8.746840] systemd[655]: Finished Create User Files and Directories. vm-test-run-hermes-remote> server # [ 8.945496] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-hermes-remote> server # [ 8.981358] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-hermes-remote> server # [ 8.983103] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-hermes-remote> server # [ 8.987092] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 vm-test-run-hermes-remote> server # [ 8.989297] cfg80211: failed to load regulatory.db vm-test-run-hermes-remote> client # [ 8.828250] systemd[655]: Listening on D-Bus User Message Bus Socket. vm-test-run-hermes-remote> client # [ 8.829803] systemd[655]: Reached target Sockets. vm-test-run-hermes-remote> client # [ 8.830882] systemd[655]: Reached target Basic System. vm-test-run-hermes-remote> client # [ 8.832320] systemd[1]: Started User Manager for UID 1000. vm-test-run-hermes-remote> client # [ 8.833915] systemd[655]: Starting Run user-specific NixOS activation... vm-test-run-hermes-remote> server # [ 9.056884] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-hermes-remote> server # [ 8.844683] dhcpcd[798]: eth0: waiting for carrier vm-test-run-hermes-remote> server # [ 8.846744] dhcpcd[798]: eth0: carrier acquired vm-test-run-hermes-remote> server # [ 8.856845] dhcpcd[798]: DUID 00:01:00:01:32:3c:6e:d6:52:54:00:12:34:56 vm-test-run-hermes-remote> server # [ 8.859237] dhcpcd[798]: eth0: IAID 00:12:34:56 vm-test-run-hermes-remote> server # [ 8.860574] dhcpcd[798]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-hermes-remote> client # [ 8.887272] systemd[655]: Finished Run user-specific NixOS activation. vm-test-run-hermes-remote> client # [ 8.888653] systemd[655]: Reached target Main User Target. vm-test-run-hermes-remote> client # [ 8.889338] systemd[655]: Startup finished in 426ms. vm-test-run-hermes-remote> server # [ 9.401868] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:14,576 INFO Set uid to user 0 succeeded vm-test-run-hermes-remote> server # [ 9.409348] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:14,585 INFO supervisord started with pid 816 vm-test-run-hermes-remote> server # [ 9.521055] dhcpcd[798]: eth0: soliciting a DHCP lease vm-test-run-hermes-remote> server # [ 9.783003] NET: Registered PF_PACKET protocol family vm-test-run-hermes-remote> client # [ 9.597255] dhcpcd[721]: eth0: soliciting a DHCP lease vm-test-run-hermes-remote> server # [ 9.584847] dhcpcd[798]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-hermes-remote> server # [ 9.592387] dhcpcd[798]: eth0: probing address 10.0.2.15/24 vm-test-run-hermes-remote> client # [ 9.820842] NET: Registered PF_PACKET protocol family vm-test-run-hermes-remote> client # [ 9.633610] dhcpcd[721]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-hermes-remote> client # [ 9.646203] dhcpcd[721]: eth0: probing address 10.0.2.15/24 vm-test-run-hermes-remote> client # [ 10.393774] dhcpcd[721]: eth0: soliciting an IPv6 router vm-test-run-hermes-remote> client # [ 10.395190] dhcpcd[721]: eth0: Router Advertisement from fe80::2 vm-test-run-hermes-remote> client # [ 10.396342] dhcpcd[721]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-hermes-remote> client # [ 10.397596] dhcpcd[721]: eth0: adding route to fec0::/64 vm-test-run-hermes-remote> client # [ 10.398687] dhcpcd[721]: eth0: adding default route via fe80::2 vm-test-run-hermes-remote> server # [ 10.414153] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:15,590 INFO spawned: 'notify' with pid 845 vm-test-run-hermes-remote> server # [ 10.417672] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:15,593 INFO spawned: 'virtiofsd-hermes-exchange' with pid 846 vm-test-run-hermes-remote> server # [ 10.422860] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:15,598 INFO spawned: 'virtiofsd-hermes-state' with pid 847 vm-test-run-hermes-remote> server # [ 10.427820] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:15,603 INFO spawned: 'virtiofsd-host-config' with pid 848 vm-test-run-hermes-remote> server # [ 10.432551] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:15,608 INFO spawned: 'virtiofsd-ro-store' with pid 850 vm-test-run-hermes-remote> server # [ 10.477727] supervisord[816]: virtiofsd-ro-store [2026-09-15T21:02:15Z WARN virtiofsd::passthrough] Filesystem mounted on "/" (mount ID: 430): Filesystem does not support file handles, falling back to O_PATH FDs vm-test-run-hermes-remote> server # [ 10.478849] supervisord[816]: virtiofsd-ro-store [2026-09-15T21:02:15Z WARN virtiofsd::passthrough] Failed to generate a file handle for the root node, disabling file handles altogether vm-test-run-hermes-remote> server # [ 10.479852] supervisord[816]: virtiofsd-ro-store [2026-09-15T21:02:15Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 10.480857] supervisord[816]: virtiofsd-hermes-exchange [2026-09-15T21:02:15Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 10.482346] supervisord[816]: virtiofsd-hermes-state [2026-09-15T21:02:15Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 10.490224] supervisord[816]: virtiofsd-host-config [2026-09-15T21:02:15Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-hermes-remote> server # [ 11.189585] dhcpcd[798]: eth0: soliciting an IPv6 router vm-test-run-hermes-remote> server # [ 11.190389] dhcpcd[798]: eth0: Router Advertisement from fe80::2 vm-test-run-hermes-remote> server # [ 11.191439] dhcpcd[798]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-hermes-remote> server # [ 11.192234] dhcpcd[798]: eth0: adding route to fec0::/64 vm-test-run-hermes-remote> server # [ 11.193426] dhcpcd[798]: eth0: adding default route via fe80::2 vm-test-run-hermes-remote> server # [ 11.493837] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:16,669 INFO success: notify entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 11.494785] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:16,669 INFO success: virtiofsd-hermes-exchange entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 11.495852] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:16,670 INFO success: virtiofsd-hermes-state entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 11.496768] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:16,670 INFO success: virtiofsd-host-config entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 11.498165] microvm-virtiofsd@hermes-alice[816]: 2026-09-15 21:02:16,670 INFO success: virtiofsd-ro-store entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) vm-test-run-hermes-remote> server # [ 11.503664] systemd[1]: Started VirtioFS daemons for MicroVM 'hermes-alice'. vm-test-run-hermes-remote> server # [ 11.507420] systemd[1]: Starting MicroVM 'hermes-alice'... vm-test-run-hermes-remote> server # [ 11.676096] systemd[1]: Started MicroVM 'hermes-alice'. vm-test-run-hermes-remote> server # [ 11.677279] systemd[1]: Reached target microvms.target. vm-test-run-hermes-remote> server # [ 12.050932] supervisord[816]: virtiofsd-ro-store [2026-09-15T21:02:17Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 12.053209] supervisord[816]: virtiofsd-hermes-exchange [2026-09-15T21:02:17Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 12.055856] microvm@hermes-alice[927]: microvm@hermes-alice: warning: Number of SMP cpus requested (8) exceeds the recommended cpus supported by KVM (4) vm-test-run-hermes-remote> server # [ 12.076814] microvm@hermes-alice[927]: microvm@hermes-alice: warning: Number of hotpluggable cpus requested (8) exceeds the recommended cpus supported by KVM (4) vm-test-run-hermes-remote> server # [ 12.079401] supervisord[816]: virtiofsd-hermes-state [2026-09-15T21:02:17Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 12.080295] supervisord[816]: virtiofsd-host-config [2026-09-15T21:02:17Z INFO virtiofsd] Client connected, servicing requests vm-test-run-hermes-remote> server # [ 12.266723] microvm@hermes-alice[927]: SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-hermes-remote> server # [ 13.534579] microvm@hermes-alice[927]: Booting from ROM... vm-test-run-hermes-remote> server # [ 13.537727] microvm@hermes-alice[927]: PPrroobbiinngg EEDDDD ((eedddd==ooffff ttoo ddiissaabbllee))...... ook vm-test-run-hermes-remote> server # [ 13.758180] microvm@hermes-alice[927]: No EFI environment detected. vm-test-run-hermes-remote> server # [ 13.760486] microvm@hermes-alice[927]: early console in extract_kernel vm-test-run-hermes-remote> server # [ 13.761992] microvm@hermes-alice[927]: input_data: 0x0000000003ac42cc vm-test-run-hermes-remote> server # [ 13.763542] microvm@hermes-alice[927]: input_len: 0x0000000000cbc3ab vm-test-run-hermes-remote> server # [ 13.764883] microvm@hermes-alice[927]: output: 0x0000000001000000 vm-test-run-hermes-remote> server # [ 13.766460] microvm@hermes-alice[927]: output_len: 0x0000000003729010 vm-test-run-hermes-remote> server # [ 13.768347] microvm@hermes-alice[927]: kernel_total_size: 0x0000000002e30000 vm-test-run-hermes-remote> server # [ 13.769888] microvm@hermes-alice[927]: needed_size: 0x0000000003800000 vm-test-run-hermes-remote> server # [ 13.771747] microvm@hermes-alice[927]: trampoline_32bit: 0x0000000000000000 vm-test-run-hermes-remote> server # [ 13.773716] microvm@hermes-alice[927]: Physical KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 13.775617] microvm@hermes-alice[927]: Virtual KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 13.776814] microvm@hermes-alice[927]: vm-test-run-hermes-remote> server # [ 13.778136] microvm@hermes-alice[927]: Decompressing Linux... No EFI environment detected. vm-test-run-hermes-remote> server # [ 14.359193] microvm@hermes-alice[927]: Parsing ELF... Performing relocations... done. vm-test-run-hermes-remote> server # [ 14.361722] microvm@hermes-alice[927]: Booting the kernel (entry_offset: 0x000000000278d520). vm-test-run-hermes-remote> server # [ 14.377733] microvm@hermes-alice[927]: [ 0.000000] Linux version 6.18.45 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Wed Aug 19 16:18:21 UTC 2026 vm-test-run-hermes-remote> server # [ 14.392923] microvm@hermes-alice[927]: [ 0.000000] Command line: earlyprintk=ttyS0 console=ttyS0 reboot=t panic=-1 8250.nr_uarts=1 8250.nr_uarts=1 root=fstab loglevel=4 lsm=landlock,yama,bpf init=/nix/store/cz2dcc0iirm52qap7gah9dai5mr49jg1-nixos-system-hermes-alice-26.11pre-git/init regInfo=/nix/store/j413gf9nr29jsq0d7cpifx7cbdmgj23s-closure-info/registration vm-test-run-hermes-remote> server # [ 14.398502] microvm@hermes-alice[927]: [ 0.000000] BIOS-provided physical RAM map: vm-test-run-hermes-remote> server # [ 14.400090] microvm@hermes-alice[927]: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-hermes-remote> server # [ 14.402899] microvm@hermes-alice[927]: [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-hermes-remote> server # [ 14.406378] microvm@hermes-alice[927]: [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-hermes-remote> server # [ 14.409734] microvm@hermes-alice[927]: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfffdfff] usable vm-test-run-hermes-remote> server # [ 14.413244] microvm@hermes-alice[927]: [ 0.000000] BIOS-e820: [mem 0x00000000bfffe000-0x00000000bfffffff] reserved vm-test-run-hermes-remote> server # [ 14.417072] microvm@hermes-alice[927]: [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-hermes-remote> server # [ 14.421246] microvm@hermes-alice[927]: [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-hermes-remote> server # [ 14.425364] microvm@hermes-alice[927]: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable vm-test-run-hermes-remote> server # [ 14.428747] microvm@hermes-alice[927]: [ 0.000000] printk: legacy bootconsole [earlyser0] enabled vm-test-run-hermes-remote> server # [ 14.435618] microvm@hermes-alice[927]: Memory KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> client # [ 14.544255] dhcpcd[721]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-hermes-remote> client # [ 14.546096] dhcpcd[721]: eth0: adding route to 10.0.2.0/24 vm-test-run-hermes-remote> client # [ 14.547183] dhcpcd[721]: eth0: adding default route via 10.0.2.2 vm-test-run-hermes-remote> client # [ 14.619281] systemd[1]: Started DHCP Client. vm-test-run-hermes-remote> client # [ 14.620495] systemd[1]: Reached target Multi-User System. vm-test-run-hermes-remote> client # [ 14.621662] systemd[1]: Startup finished in 824ms (kernel) + 3.583s (initrd) + 10.213s (userspace) = 14.621s. vm-test-run-hermes-remote> server # [ 15.462852] dhcpcd[798]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-hermes-remote> server # [ 15.463720] dhcpcd[798]: eth0: adding route to 10.0.2.0/24 vm-test-run-hermes-remote> server # [ 15.464701] dhcpcd[798]: eth0: adding default route via 10.0.2.2 vm-test-run-hermes-remote> server # [ 15.538646] systemd[1]: Started DHCP Client. vm-test-run-hermes-remote> server # [ 15.539791] systemd[1]: Reached target Multi-User System. vm-test-run-hermes-remote> server # [ 15.540899] systemd[1]: Startup finished in 1.018s (kernel) + 3.570s (initrd) + 10.951s (userspace) = 15.540s. vm-test-run-hermes-remote> server: (finished: waiting for unit multi-user.target, in 16.55 seconds) vm-test-run-hermes-remote> server: waiting for unit sshd.service vm-test-run-hermes-remote> server: (finished: waiting for unit sshd.service, in 0.04 seconds) vm-test-run-hermes-remote> client: waiting for unit multi-user.target vm-test-run-hermes-remote> client: waiting for the VM to finish booting vm-test-run-hermes-remote> client: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-hermes-remote> client: connected to guest root shell vm-test-run-hermes-remote> client: (connecting took 0.00 seconds) vm-test-run-hermes-remote> client: (finished: waiting for the VM to finish booting, in 0.00 seconds) vm-test-run-hermes-remote> client: (finished: waiting for unit multi-user.target, in 0.07 seconds) vm-test-run-hermes-remote> client: must succeed: install -d -m 0755 /var/lib/hermes-identity vm-test-run-hermes-remote> client: (finished: must succeed: install -d -m 0755 /var/lib/hermes-identity, in 0.02 seconds) vm-test-run-hermes-remote> client: must succeed: install -m 0400 -o alice -g users /nix/store/zqhqgknl55f7cadi9p284b2x4z9vhrld-privkey.snakeoil /var/lib/hermes-identity/alice vm-test-run-hermes-remote> client: (finished: must succeed: install -m 0400 -o alice -g users /nix/store/zqhqgknl55f7cadi9p284b2x4z9vhrld-privkey.snakeoil /var/lib/hermes-identity/alice, in 0.02 seconds) vm-test-run-hermes-remote> client: must fail: test -e /home/alice/.ssh vm-test-run-hermes-remote> client: (finished: must fail: test -e /home/alice/.ssh, in 0.01 seconds) vm-test-run-hermes-remote> ??? Warning (UserWarning): wait_for_unit(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. vm-test-run-hermes-remote> File "/nix/store/ri05iv8i720xw2qylqi7msjin73k6v9y-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 vm-test-run-hermes-remote> server: waiting for unit microvm@hermes-alice.service vm-test-run-hermes-remote> server: (finished: waiting for unit microvm@hermes-alice.service, in 0.11 seconds) vm-test-run-hermes-remote> subtest: the token file mode is the whole ACL vm-test-run-hermes-remote> server: must succeed: stat -c '%U %a' /var/lib/hermes-microvm/alice/desktop-token vm-test-run-hermes-remote> server: (finished: must succeed: stat -c '%U %a' /var/lib/hermes-microvm/alice/desktop-token, in 0.02 seconds) vm-test-run-hermes-remote> (finished: subtest: the token file mode is the whole ACL, in 0.02 seconds) vm-test-run-hermes-remote> client: must succeed: id -u alice vm-test-run-hermes-remote> client: (finished: must succeed: id -u alice, in 0.02 seconds) vm-test-run-hermes-remote> client: waiting for unit user@1000.service vm-test-run-hermes-remote> client: (finished: waiting for unit user@1000.service, in 0.09 seconds) vm-test-run-hermes-remote> subtest: the launcher opens the tunnel and prints the remote env vm-test-run-hermes-remote> client: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 hermes-desktop-remote --print-env' vm-test-run-hermes-remote> client # [ 16.241050] su[830]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 16.250825] su[830]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 16.300603] systemd[655]: Starting SSH forward to the remote hermes dashboard... vm-test-run-hermes-remote> client # [ 16.338590] systemd[655]: Started SSH forward to the remote hermes dashboard. vm-test-run-hermes-remote> server # [ 16.487124] sshd-session[1050]: Accepted publickey for alice from 2001:db8:1::1 port 58040 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E vm-test-run-hermes-remote> server # [ 16.497958] sshd-session[1050]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 16.537108] systemd[1]: Created slice Slice /user/1000. vm-test-run-hermes-remote> server # [ 16.540953] systemd[1]: Starting User Runtime Directory /run/user/1000... vm-test-run-hermes-remote> server # [ 16.567525] systemd-logind[638]: New session '1' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 16.577576] systemd[1]: Finished User Runtime Directory /run/user/1000. vm-test-run-hermes-remote> server # [ 16.581708] systemd[1]: Starting User Manager for UID 1000... vm-test-run-hermes-remote> server # [ 16.614840] (systemd)[1056]: pam_unix(systemd-user:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 16.618454] systemd-logind[638]: New session '2' of user 'alice' with class 'manager' and type 'unspecified'. vm-test-run-hermes-remote> server # [ 16.651383] systemd[1056]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> server # [ 16.686952] microvm@hermes-alice[927]: Poking KASLR using RDRAND RDTSC... vm-test-run-hermes-remote> server # [ 16.771141] sshd-session[1063]: Accepted publickey for alice from 2001:db8:1::1 port 58042 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E vm-test-run-hermes-remote> server # [ 16.780572] sshd-session[1063]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 16.786807] systemd-logind[638]: New session '3' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 16.823253] systemd[1056]: Queued start job for default target Main User Target. vm-test-run-hermes-remote> server # [ 16.827076] systemd[1056]: Failed to adjust io pressure threshold, ignoring: Device or resource busy vm-test-run-hermes-remote> server # [ 16.829511] systemd[1056]: Created slice User Application Slice. vm-test-run-hermes-remote> server # [ 16.830381] systemd[1056]: Started Daily Cleanup of User's Temporary Directories. vm-test-run-hermes-remote> server # [ 16.833255] systemd[1056]: Reached target Paths. vm-test-run-hermes-remote> server # [ 16.836080] systemd[1056]: Reached target Timers. vm-test-run-hermes-remote> server # [ 16.837833] systemd[1056]: Starting D-Bus User Message Bus Socket... vm-test-run-hermes-remote> server # [ 16.839878] systemd[1056]: Starting Create User Files and Directories... vm-test-run-hermes-remote> server # [ 16.865776] systemd[1056]: Finished Create User Files and Directories. vm-test-run-hermes-remote> server # [ 16.901735] systemd[1056]: Listening on D-Bus User Message Bus Socket. vm-test-run-hermes-remote> server # [ 16.903259] systemd[1056]: Reached target Sockets. vm-test-run-hermes-remote> server # [ 16.904560] systemd[1056]: Reached target Basic System. vm-test-run-hermes-remote> server # [ 16.905854] systemd[1]: Started User Manager for UID 1000. vm-test-run-hermes-remote> server # [ 16.908834] systemd[1]: Started Session 1 of User alice. vm-test-run-hermes-remote> server # [ 16.910513] systemd[1056]: Starting Run user-specific NixOS activation... vm-test-run-hermes-remote> server # [ 16.914621] systemd[1]: Started Session 3 of User alice. vm-test-run-hermes-remote> server # [ 16.945637] sshd-session[1072]: Received disconnect from 2001:db8:1::1 port 58042:11: disconnected by user vm-test-run-hermes-remote> client # hermes-desktop-remote: this prints the dashboard token, which never expires. Keep it out of scrollback, logs and bug reports. vm-test-run-hermes-remote> server # [ 16.948404] sshd-session[1072]: Disconnected from user alice 2001:db8:1::1 port 58042 vm-test-run-hermes-remote> server # [ 16.949589] sshd-session[1063]: pam_unix(sshd:session): session closed for user alice vm-test-run-hermes-remote> client # [ 16.976214] su[830]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> server # [ 16.952125] systemd[1056]: Finished Run user-specific NixOS activation. vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 hermes-desktop-remote --print-env', in 0.78 seconds) vm-test-run-hermes-remote> server: must succeed: cat /var/lib/hermes-microvm/alice/desktop-token vm-test-run-hermes-remote> server # [ 16.953886] systemd[1]: session-3.scope: Deactivated successfully. vm-test-run-hermes-remote> server # [ 16.955617] systemd[1056]: Reached target Main User Target. vm-test-run-hermes-remote> server # [ 16.956804] systemd-logind[638]: Session 3 logged out. Waiting for processes to exit. vm-test-run-hermes-remote> server # [ 16.958547] systemd-logind[638]: Removed session 3. vm-test-run-hermes-remote> server # [ 16.959679] microvm@hermes-alice[927]: [ 2.457890] PCI: Fatal: No config space access function found vm-test-run-hermes-remote> server # [ 16.962115] systemd[1056]: Startup finished in 324ms. vm-test-run-hermes-remote> server: (finished: must succeed: cat /var/lib/hermes-microvm/alice/desktop-token, in 0.04 seconds) vm-test-run-hermes-remote> client: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 systemctl --user is-active hermes-remote-tunnel.service' vm-test-run-hermes-remote> client # [ 17.048372] su[864]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 17.058236] su[864]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 17.077577] su[864]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c 'XDG_RUNTIME_DIR=/run/user/1000 systemctl --user is-active hermes-remote-tunnel.service', in 0.06 seconds) vm-test-run-hermes-remote> (finished: subtest: the launcher opens the tunnel and prints the remote env, in 0.88 seconds) vm-test-run-hermes-remote> subtest: the key runs the forced command, never the caller's vm-test-run-hermes-remote> client: must succeed: su -l alice -c '/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice alice@server -- id -un' vm-test-run-hermes-remote> client # [ 17.106498] su[869]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 17.115147] su[869]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 17.205598] sshd-session[1080]: Accepted publickey for alice from 2001:db8:1::1 port 58050 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E vm-test-run-hermes-remote> server # [ 17.218292] sshd-session[1080]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 17.227701] systemd-logind[638]: New session '4' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 17.230344] systemd[1]: Started Session 4 of User alice. vm-test-run-hermes-remote> server # [ 17.264842] sshd-session[1083]: Received disconnect from 2001:db8:1::1 port 58050:11: disconnected by user vm-test-run-hermes-remote> server # [ 17.265871] sshd-session[1083]: Disconnected from user alice 2001:db8:1::1 port 58050 vm-test-run-hermes-remote> client # [ 17.292050] su[869]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c '/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice alice@server -- id -un', in 0.21 seconds) vm-test-run-hermes-remote> (finished: subtest: the key runs the forced command, never the caller's, in 0.21 seconds) vm-test-run-hermes-remote> subtest: the key forwards to the dashboard port and nowhere else vm-test-run-hermes-remote> client: must succeed: su -l alice -c '/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice -N -f -L 127.0.0.1:24999:127.0.0.1:22 alice@server' vm-test-run-hermes-remote> server # [ 17.266819] sshd-session[1080]: pam_unix(sshd:session): session closed for user alice vm-test-run-hermes-remote> server # [ 17.272152] systemd[1]: session-4.scope: Deactivated successfully. vm-test-run-hermes-remote> server # [ 17.278224] systemd-logind[638]: Session 4 logged out. Waiting for processes to exit. vm-test-run-hermes-remote> server # [ 17.279204] systemd-logind[638]: Removed session 4. vm-test-run-hermes-remote> client # [ 17.317848] su[874]: Successful su for alice by root vm-test-run-hermes-remote> client # [ 17.326728] su[874]: pam_unix(su:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> client # [ 17.460829] su[874]: pam_unix(su:session): session closed for user alice vm-test-run-hermes-remote> client: (finished: must succeed: su -l alice -c '/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin/ssh -o BatchMode=yes -o IdentitiesOnly=yes -o UserKnownHostsFile=/etc/ssh/hermes-known-hosts -o StrictHostKeyChecking=yes -i /var/lib/hermes-identity/alice -N -f -L 127.0.0.1:24999:127.0.0.1:22 alice@server', in 0.17 seconds) vm-test-run-hermes-remote> client: waiting for TCP port 24999 on 127.0.0.1 vm-test-run-hermes-remote> server # [ 17.438634] sshd-session[1086]: Accepted publickey for alice from 2001:db8:1::1 port 58064 ssh2: ECDSA SHA256:iZ7NQZ++u9TDmrQaukZrn52DebZINaNol/CuKDOF50E vm-test-run-hermes-remote> server # [ 17.448224] sshd-session[1086]: pam_unix(sshd:session): session opened for user alice(uid=1000) by (uid=0) vm-test-run-hermes-remote> server # [ 17.455692] systemd-logind[638]: New session '5' of user 'alice' with class 'user' and type 'tty'. vm-test-run-hermes-remote> server # [ 17.459335] systemd[1]: Started Session 5 of User alice. vm-test-run-hermes-remote> server # [ 17.478824] sshd-session[1089]: Received request from 2001:db8:1::1 port 58064 to connect to host 127.0.0.1 port 22, but the request was denied. vm-test-run-hermes-remote> client # Connection to 127.0.0.1 24999 port [tcp/*] succeeded! vm-test-run-hermes-remote> client: (finished: waiting for TCP port 24999 on 127.0.0.1, in 0.05 seconds) vm-test-run-hermes-remote> client: must succeed: timeout 5 /nix/store/hidb6y76pw689jyydhmdhs1jhx3kp2s9-netcat-openbsd-1.238-1/bin/nc 127.0.0.1 24999 < /dev/null || true vm-test-run-hermes-remote> server # [ 17.510905] sshd-session[1089]: Received request from 2001:db8:1::1 port 58064 to connect to host 127.0.0.1 port 22, but the request was denied. vm-test-run-hermes-remote> client: (finished: must succeed: timeout 5 /nix/store/hidb6y76pw689jyydhmdhs1jhx3kp2s9-netcat-openbsd-1.238-1/bin/nc 127.0.0.1 24999 < /dev/null || true, in 0.03 seconds) vm-test-run-hermes-remote> (finished: subtest: the key forwards to the dashboard port and nowhere else, in 0.24 seconds) vm-test-run-hermes-remote> subtest: the guest dashboard answers /api/status through the tunnel vm-test-run-hermes-remote> ??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. vm-test-run-hermes-remote> File "/nix/store/ri05iv8i720xw2qylqi7msjin73k6v9y-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 vm-test-run-hermes-remote> client: waiting for success: /nix/store/wyhhly9yani8vcjx2qvmflbn96s1568m-curl-8.21.0-bin/bin/curl -sf -o /dev/null http://127.0.0.1:23901/api/status vm-test-run-hermes-remote> ??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. vm-test-run-hermes-remote> File "/nix/store/ri05iv8i720xw2qylqi7msjin73k6v9y-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 vm-test-run-hermes-remote> server # [ 17.575806] systemd[1]: Created slice Slice /system/hermes-dashboard-fwd-alice. vm-test-run-hermes-remote> server # [ 17.577997] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45404). vm-test-run-hermes-remote> server # [ 19.669619] socat[1091]: 2026/09/15 21:02:24 socat[1091] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 19.672558] systemd[1]: hermes-dashboard-fwd-alice@0-1-127.0.0.1:22901-127.0.0.1:45404.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 19.675265] systemd[1]: hermes-dashboard-fwd-alice@0-1-127.0.0.1:22901-127.0.0.1:45404.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 20.725860] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:45410). vm-test-run-hermes-remote> server # [ 22.154211] microvm@hermes-alice[927]: +q6E616D65Booting initrd of NixOS 26.11 (Zokor) (Initrd). vm-test-run-hermes-remote> server # [ 22.420179] microvm@hermes-alice[927]: [ OK ] Created slice Slice /system/modprobe. vm-test-run-hermes-remote> server # [ 22.424466] microvm@hermes-alice[927]: [ OK ] Started Dispatch Password Requests to Console Directory Watch. vm-test-run-hermes-remote> server # [ 22.427823] microvm@hermes-alice[927]: [ OK ] Reached target Initrd Root Device. vm-test-run-hermes-remote> server # [ 22.430583] microvm@hermes-alice[927]: [ OK ] Reached target Path Units. vm-test-run-hermes-remote> server # [ 22.433298] microvm@hermes-alice[927]: [ OK ] Reached target Slice Units. vm-test-run-hermes-remote> server # [ 22.435769] microvm@hermes-alice[927]: [ OK ] Reached target Swaps. vm-test-run-hermes-remote> server # [ 22.438482] microvm@hermes-alice[927]: [ OK ] Reached target Timer Units. vm-test-run-hermes-remote> server # [ 22.442158] microvm@hermes-alice[927]: [ OK ] Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 22.445425] microvm@hermes-alice[927]: [ OK ] Listening on Journal Socket (/dev/log). vm-test-run-hermes-remote> server # [ 22.448457] microvm@hermes-alice[927]: [ OK ] Listening on Journal Sockets. vm-test-run-hermes-remote> server # [ 22.451504] microvm@hermes-alice[927]: [ OK ] Listening on udev Control Socket. vm-test-run-hermes-remote> server # [ 22.454565] microvm@hermes-alice[927]: [ OK ] Listening on udev Kernel Socket. vm-test-run-hermes-remote> server # [ 22.457338] microvm@hermes-alice[927]: [ OK ] Reached target Socket Units. vm-test-run-hermes-remote> server # [ 22.463121] microvm@hermes-alice[927]: Starting Create List of Static Device Nodes... vm-test-run-hermes-remote> server # [ 22.471895] microvm@hermes-alice[927]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 22.483539] microvm@hermes-alice[927]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 22.502320] microvm@hermes-alice[927]: Starting Load Kernel Modules... vm-test-run-hermes-remote> server # [ 22.516342] microvm@hermes-alice[927]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 22.537443] microvm@hermes-alice[927]: [ OK ] Finished Create List of Static Device Nodes. vm-test-run-hermes-remote> server # [ 22.558464] microvm@hermes-alice[927]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 22.574355] microvm@hermes-alice[927]: [ OK ] Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 22.636969] microvm@hermes-alice[927]: [ OK ] Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 22.671570] microvm@hermes-alice[927]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 22.714523] microvm@hermes-alice[927]: [ OK ] Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 22.723641] microvm@hermes-alice[927]: [ OK ] Reached target Preparation for Local File Systems. vm-test-run-hermes-remote> server # [ 22.730216] microvm@hermes-alice[927]: [ OK ] Reached target Local File Systems. vm-test-run-hermes-remote> server # [ 22.764911] microvm@hermes-alice[927]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 22.767744] microvm@hermes-alice[927]: [ OK ] Started Journal Service. vm-test-run-hermes-remote> server # [ 22.792993] microvm@hermes-alice[927]: [ OK ] Finished Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 22.805353] socat[1096]: 2026/09/15 21:02:27 socat[1096] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 22.808703] systemd[1]: hermes-dashboard-fwd-alice@1-4097-127.0.0.1:22901-127.0.0.1:45410.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 22.809817] systemd[1]: hermes-dashboard-fwd-alice@1-4097-127.0.0.1:22901-127.0.0.1:45410.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 22.821397] microvm@hermes-alice[927]: Starting Create System Files and Directories... vm-test-run-hermes-remote> server # [ 22.908094] microvm@hermes-alice[927]: [ OK ] Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 22.940295] microvm@hermes-alice[927]: [ OK ] Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 23.133358] microvm@hermes-alice[927]: [ OK ] Finished Load Kernel Modules. vm-test-run-hermes-remote> server # [ 23.144031] microvm@hermes-alice[927]: Starting Apply Kernel Variables... vm-test-run-hermes-remote> server # [ 23.178367] microvm@hermes-alice[927]: [ OK ] Finished Apply Kernel Variables. vm-test-run-hermes-remote> server # [ 23.188442] microvm@hermes-alice[927]: [ OK ] Reached target System Initialization. vm-test-run-hermes-remote> server # [ 23.192233] microvm@hermes-alice[927]: [ OK ] Reached target Basic System. vm-test-run-hermes-remote> server # [ 23.289337] microvm@hermes-alice[927]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 23.339165] microvm@hermes-alice[927]: [ OK ] Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 23.529394] microvm@hermes-alice[927]: Mounting /sysroot... vm-test-run-hermes-remote> server # [ 23.548807] microvm@hermes-alice[927]: [ OK ] Mounted /sysroot. vm-test-run-hermes-remote> server # [ 23.554422] microvm@hermes-alice[927]: [ OK ] Reached target Initrd Root File System. vm-test-run-hermes-remote> server # [ 23.558756] microvm@hermes-alice[927]: Mounting /sysroot/nix/.ro-store... vm-test-run-hermes-remote> server # [ 23.564872] microvm@hermes-alice[927]: Mounting /sysroot/nix/store... vm-test-run-hermes-remote> server # [ 23.587562] microvm@hermes-alice[927]: Mounting /sysroot/run... vm-test-run-hermes-remote> server # [ 23.596273] microvm@hermes-alice[927]: Mounting /sysroot/var/lib/hermes... vm-test-run-hermes-remote> server # [ 23.608276] microvm@hermes-alice[927]: Starting Mountpoints Configured in the Real Root... vm-test-run-hermes-remote> server # [ 23.614798] microvm@hermes-alice[927]: [ OK ] Mounted /sysroot/nix/.ro-store. vm-test-run-hermes-remote> server # [ 23.619139] microvm@hermes-alice[927]: [ OK ] Mounted /sysroot/nix/store. vm-test-run-hermes-remote> server # [ 23.623244] microvm@hermes-alice[927]: [ OK ] Mounted /sysroot/run. vm-test-run-hermes-remote> server # [ 23.627536] microvm@hermes-alice[927]: [ OK ] Mounted /sysroot/var/lib/hermes. vm-test-run-hermes-remote> server # [ 23.638351] microvm@hermes-alice[927]: Starting nix-store-binds.service... vm-test-run-hermes-remote> server # [ 23.730704] microvm@hermes-alice[927]: [ OK ] Finished Mountpoints Configured in the Real Root. vm-test-run-hermes-remote> server # [ 23.855410] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37568). vm-test-run-hermes-remote> server # [ 24.461701] microvm@hermes-alice[927]: [ OK ] Finished nix-store-binds.service. vm-test-run-hermes-remote> server # [ 24.466624] microvm@hermes-alice[927]: Starting Find NixOS closure... vm-test-run-hermes-remote> server # [ 24.496183] microvm@hermes-alice[927]: [ OK ] Finished Find NixOS closure. vm-test-run-hermes-remote> server # [ 24.858089] microvm@hermes-alice[927]: Mounting /sysroot/run/hermes-host... vm-test-run-hermes-remote> server # [ 24.926326] microvm@hermes-alice[927]: [ OK ] Mounted /sysroot/run/hermes-host. vm-test-run-hermes-remote> server # [ 24.936990] microvm@hermes-alice[927]: [ OK ] Reached target Initrd File Systems. vm-test-run-hermes-remote> server # [ 24.976062] microvm@hermes-alice[927]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-hermes-remote> server # [ 25.016100] microvm@hermes-alice[927]: [ OK ] Finished Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 25.029569] microvm@hermes-alice[927]: [ OK ] Reached target Initrd Default Target. vm-test-run-hermes-remote> server # [ 25.037169] microvm@hermes-alice[927]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-hermes-remote> server # [ 25.056237] microvm@hermes-alice[927]: [ OK ] Stopped target Initrd Default Target. vm-test-run-hermes-remote> server # [ 25.059559] microvm@hermes-alice[927]: [ OK ] Stopped target Basic System. vm-test-run-hermes-remote> server # [ 25.063197] microvm@hermes-alice[927]: [ OK ] Stopped target Initrd Root Device. vm-test-run-hermes-remote> server # [ 25.065491] microvm@hermes-alice[927]: [ OK ] Stopped target Path Units. vm-test-run-hermes-remote> server # [ 25.067814] microvm@hermes-alice[927]: [ OK ] Stopped target Slice Units. vm-test-run-hermes-remote> server # [ 25.070309] microvm@hermes-alice[927]: [ OK ] Stopped target Socket Units. vm-test-run-hermes-remote> server # [ 25.072637] microvm@hermes-alice[927]: [ OK ] Stopped target Timer Units. vm-test-run-hermes-remote> server # [ 25.075555] microvm@hermes-alice[927]: [ OK ] Closed D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 25.078088] microvm@hermes-alice[927]: [ OK ] Stopped Find NixOS closure. vm-test-run-hermes-remote> server # [ 25.084167] microvm@hermes-alice[927]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 25.090776] microvm@hermes-alice[927]: [ OK ] Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-hermes-remote> server # [ 25.094370] microvm@hermes-alice[927]: [ OK ] Stopped Create System Files and Directories. vm-test-run-hermes-remote> server # [ 25.097324] microvm@hermes-alice[927]: [ OK ] Stopped Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 25.101083] microvm@hermes-alice[927]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 25.106870] microvm@hermes-alice[927]: [ OK ] Stopped Virtual Console Setup. vm-test-run-hermes-remote> server # [ 25.115883] microvm@hermes-alice[927]: [ OK ] Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 25.121551] microvm@hermes-alice[927]: [ OK ] Finished Cleaning Up and Shutting Down Daemons. vm-test-run-hermes-remote> server # [ 25.130881] microvm@hermes-alice[927]: [ OK ] Stopped Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 25.140125] microvm@hermes-alice[927]: Starting Cleanup udev Database... vm-test-run-hermes-remote> server # [ 25.144670] microvm@hermes-alice[927]: [ OK ] Stopped Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 25.151410] microvm@hermes-alice[927]: [ OK ] Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 25.168703] microvm@hermes-alice[927]: [ OK ] Finished Cleanup udev Database. vm-test-run-hermes-remote> server # [ 25.174556] microvm@hermes-alice[927]: [ OK ] Reached target Switch Root. vm-test-run-hermes-remote> server # [ 25.180189] microvm@hermes-alice[927]: Starting NixOS Activation... vm-test-run-hermes-remote> server # [ 25.940600] socat[1101]: 2026/09/15 21:02:31 socat[1101] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 25.944191] systemd[1]: hermes-dashboard-fwd-alice@2-8193-127.0.0.1:22901-127.0.0.1:37568.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 25.946789] systemd[1]: hermes-dashboard-fwd-alice@2-8193-127.0.0.1:22901-127.0.0.1:37568.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 26.993465] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37584). vm-test-run-hermes-remote> server # [ 27.442133] microvm@hermes-alice[927]: [* ] A start job is running for NixOS Activation (2s / no limit) vm-test-run-hermes-remote> server # [ 28.026433] microvm@hermes-alice[927]: [** ] A start job is running for NixOS Activation (2s / no limit) vm-test-run-hermes-remote> server # [ 28.602894] microvm@hermes-alice[927]: [*** ] A start job is running for NixOS Activation (3s / no limit) vm-test-run-hermes-remote> server # [ 29.076753] socat[1106]: 2026/09/15 21:02:34 socat[1106] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection timed out vm-test-run-hermes-remote> server # [ 29.079669] systemd[1]: hermes-dashboard-fwd-alice@3-2-127.0.0.1:22901-127.0.0.1:37584.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 29.080843] systemd[1]: hermes-dashboard-fwd-alice@3-2-127.0.0.1:22901-127.0.0.1:37584.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 29.185879] microvm@hermes-alice[927]: [ *** ] A start job is running for NixOS Activation (4s / no limit) vm-test-run-hermes-remote> server # [ 29.768698] microvm@hermes-alice[927]: [ *** ] A start job is running for NixOS Activation (4s / no limit) vm-test-run-hermes-remote> server # [ 30.037496] microvm@hermes-alice[927]: [ OK ] Finished NixOS Activation. vm-test-run-hermes-remote> server # [ 30.041266] microvm@hermes-alice[927]: Starting Switch Root... vm-test-run-hermes-remote> server # [ 30.133176] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37592). vm-test-run-hermes-remote> server # [ 30.884907] socat[1111]: 2026/09/15 21:02:36 socat[1111] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 30.887743] systemd[1]: hermes-dashboard-fwd-alice@4-8194-127.0.0.1:22901-127.0.0.1:37592.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 30.888603] systemd[1]: hermes-dashboard-fwd-alice@4-8194-127.0.0.1:22901-127.0.0.1:37592.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 31.654539] microvm@hermes-alice[927]: +q6E616D65 vm-test-run-hermes-remote> server # [ 31.657035] microvm@hermes-alice[927]: Welcome to NixOS 26.11 (Zokor)! vm-test-run-hermes-remote> server # [ 31.657858] microvm@hermes-alice[927]: vm-test-run-hermes-remote> server # [ 31.939429] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:37608). vm-test-run-hermes-remote> server # [ 31.974512] socat[1117]: 2026/09/15 21:02:37 socat[1117] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 31.977058] systemd[1]: hermes-dashboard-fwd-alice@5-8195-127.0.0.1:22901-127.0.0.1:37608.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 31.979540] systemd[1]: hermes-dashboard-fwd-alice@5-8195-127.0.0.1:22901-127.0.0.1:37608.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 33.042324] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44406). vm-test-run-hermes-remote> server # [ 33.102453] socat[1121]: 2026/09/15 21:02:38 socat[1121] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 33.106756] systemd[1]: hermes-dashboard-fwd-alice@6-3-127.0.0.1:22901-127.0.0.1:44406.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 33.109557] systemd[1]: hermes-dashboard-fwd-alice@6-3-127.0.0.1:22901-127.0.0.1:44406.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 34.159768] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44416). vm-test-run-hermes-remote> server # [ 34.184647] socat[1125]: 2026/09/15 21:02:39 socat[1125] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 34.187672] systemd[1]: hermes-dashboard-fwd-alice@7-4098-127.0.0.1:22901-127.0.0.1:44416.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 34.190228] systemd[1]: hermes-dashboard-fwd-alice@7-4098-127.0.0.1:22901-127.0.0.1:44416.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 34.775642] microvm@hermes-alice[927]: [ OK ] Stopped initrd-switch-root.service. vm-test-run-hermes-remote> server # [ 34.780683] microvm@hermes-alice[927]: [ OK ] Created slice Slice /system/getty. vm-test-run-hermes-remote> server # [ 34.784095] microvm@hermes-alice[927]: [ OK ] Created slice Slice /system/serial-getty. vm-test-run-hermes-remote> server # [ 34.787193] microvm@hermes-alice[927]: [ OK ] Created slice User and Session Slice. vm-test-run-hermes-remote> server # [ 34.790725] microvm@hermes-alice[927]: [ OK ] Started Forward Password Requests to Wall Directory Watch. vm-test-run-hermes-remote> server # [ 34.793737] microvm@hermes-alice[927]: [ OK ] Started Daily Cleanup of Temporary Directories. vm-test-run-hermes-remote> server # [ 34.796344] microvm@hermes-alice[927]: Expecting device /dev/ttyS0... vm-test-run-hermes-remote> server # [ 34.799237] microvm@hermes-alice[927]: [ OK ] Reached target Local Encrypted Volumes. vm-test-run-hermes-remote> server # [ 34.801905] microvm@hermes-alice[927]: [ OK ] Stopped target initrd-fs.target. vm-test-run-hermes-remote> server # [ 34.805139] microvm@hermes-alice[927]: [ OK ] Stopped target initrd-root-fs.target. vm-test-run-hermes-remote> server # [ 34.808132] microvm@hermes-alice[927]: [ OK ] Stopped target initrd-switch-root.target. vm-test-run-hermes-remote> server # [ 34.811173] microvm@hermes-alice[927]: [ OK ] Reached target Virtual Machines and Containers. vm-test-run-hermes-remote> server # [ 34.813428] microvm@hermes-alice[927]: [ OK ] Reached target Path Units. vm-test-run-hermes-remote> server # [ 34.816065] microvm@hermes-alice[927]: [ OK ] Reached target Remote File Systems. vm-test-run-hermes-remote> server # [ 34.818307] microvm@hermes-alice[927]: [ OK ] Reached target Slice Units. vm-test-run-hermes-remote> server # [ 34.821429] microvm@hermes-alice[927]: [ OK ] Listening on D-Bus System Message Bus Socket. vm-test-run-hermes-remote> server # [ 34.831428] microvm@hermes-alice[927]: [ OK ] Listening on OpenSSH Server Socket…temd-ssh-generator, AF_UNIX Local). vm-test-run-hermes-remote> server # [ 34.850914] microvm@hermes-alice[927]: [ OK ] Listening on SSH Socket. vm-test-run-hermes-remote> server # [ 34.860868] microvm@hermes-alice[927]: [ OK ] Listening on Query the User Interactively for a Password. vm-test-run-hermes-remote> server # [ 34.871499] microvm@hermes-alice[927]: [ OK ] Listening on Boot Loader Control Service Socket. vm-test-run-hermes-remote> server # [ 34.885801] microvm@hermes-alice[927]: [ OK ] Listening on Process Core Dump Socket. vm-test-run-hermes-remote> server # [ 34.896676] microvm@hermes-alice[927]: [ OK ] Listening on Credential Encryption/Decryption. vm-test-run-hermes-remote> server # [ 34.906965] microvm@hermes-alice[927]: [ OK ] Listening on Factory Reset Management. vm-test-run-hermes-remote> server # [ 34.909555] microvm@hermes-alice[927]: [ OK ] Listening on Hostname Service Socket. vm-test-run-hermes-remote> server # [ 34.922414] microvm@hermes-alice[927]: Starting Journal Log Access Socket... vm-test-run-hermes-remote> server # [ 34.927812] microvm@hermes-alice[927]: [ OK ] Listening on Journal Audit Socket. vm-test-run-hermes-remote> server # [ 34.932671] microvm@hermes-alice[927]: [ OK ] Listening on Virtual Machine and C…tainer Registration Service Socket. vm-test-run-hermes-remote> server # [ 34.947611] microvm@hermes-alice[927]: [ OK ] Listening on Console Output Muting Service Socket. vm-test-run-hermes-remote> server # [ 34.952903] microvm@hermes-alice[927]: [ OK ] Listening on Network Management Resolve Hook Socket. vm-test-run-hermes-remote> server # [ 34.956733] microvm@hermes-alice[927]: [ OK ] Listening on Network Management Metrics Varlink Socket. vm-test-run-hermes-remote> server # [ 34.960503] microvm@hermes-alice[927]: [ OK ] Listening on Network Management Varlink Socket. vm-test-run-hermes-remote> server # [ 34.964062] microvm@hermes-alice[927]: [ OK ] Listening on Network Management Netlink Socket. vm-test-run-hermes-remote> server # [ 34.969981] microvm@hermes-alice[927]: [ OK ] Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-hermes-remote> server # [ 35.000652] microvm@hermes-alice[927]: [ OK ] Listening on Disk Repartitioning Service Socket. vm-test-run-hermes-remote> server # [ 35.005144] microvm@hermes-alice[927]: [ OK ] Listening on Resolve Monitor Varlink Socket. vm-test-run-hermes-remote> server # [ 35.008354] microvm@hermes-alice[927]: [ OK ] Listening on Resolve Service Varlink Socket. vm-test-run-hermes-remote> server # [ 35.011201] microvm@hermes-alice[927]: [ OK ] Listening on udev Varlink Socket. vm-test-run-hermes-remote> server # [ 35.019157] microvm@hermes-alice[927]: Mounting Huge Pages File System... vm-test-run-hermes-remote> server # [ 35.025704] microvm@hermes-alice[927]: Mounting POSIX Message Queue File System... vm-test-run-hermes-remote> server # [ 35.070243] microvm@hermes-alice[927]: Mounting /home/alice/hermes... vm-test-run-hermes-remote> server # [ 35.077784] microvm@hermes-alice[927]: Mounting /run/wrappers... vm-test-run-hermes-remote> server # [ 35.128672] microvm@hermes-alice[927]: Mounting Kernel Debug File System... vm-test-run-hermes-remote> server # [ 35.137618] microvm@hermes-alice[927]: Mounting Kernel Trace File System... vm-test-run-hermes-remote> server # [ 35.179852] microvm@hermes-alice[927]: Starting Load Kernel Module configfs... vm-test-run-hermes-remote> server # [ 35.211342] microvm@hermes-alice[927]: Mounting FUSE Control File System... vm-test-run-hermes-remote> server # [ 35.216120] microvm@hermes-alice[927]: [ OK ] Stopped nix-store-binds.service. vm-test-run-hermes-remote> server # [ 35.240239] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44428). vm-test-run-hermes-remote> server # [ 35.291631] socat[1130]: 2026/09/15 21:02:40 socat[1130] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 35.297082] systemd[1]: hermes-dashboard-fwd-alice@8-12289-127.0.0.1:22901-127.0.0.1:44428.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 35.297945] systemd[1]: hermes-dashboard-fwd-alice@8-12289-127.0.0.1:22901-127.0.0.1:44428.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 35.315330] microvm@hermes-alice[927]: Starting Journal Service... vm-test-run-hermes-remote> server # [ 35.394415] microvm@hermes-alice[927]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-hermes-remote> server # [ 35.458978] microvm@hermes-alice[927]: Starting Remount Root and Kernel File Systems... vm-test-run-hermes-remote> server # [ 35.516337] microvm@hermes-alice[927]: Starting Network Name Resolution... vm-test-run-hermes-remote> server # [ 35.570875] microvm@hermes-alice[927]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-hermes-remote> server # [ 35.610861] microvm@hermes-alice[927]: Starting Coldplug All udev Devices... vm-test-run-hermes-remote> server # [ 35.673644] microvm@hermes-alice[927]: [ OK ] Listening on Journal Log Access Socket. vm-test-run-hermes-remote> server # [ 35.678968] microvm@hermes-alice[927]: [ OK ] Mounted Huge Pages File System. vm-test-run-hermes-remote> server # [ 35.686340] microvm@hermes-alice[927]: [ OK ] Mounted POSIX Message Queue File System. vm-test-run-hermes-remote> server # [ 35.691454] microvm@hermes-alice[927]: [ OK ] Mounted /home/alice/hermes. vm-test-run-hermes-remote> server # [ 35.694329] microvm@hermes-alice[927]: [ OK ] Mounted /run/wrappers. vm-test-run-hermes-remote> server # [ 35.698119] microvm@hermes-alice[927]: [ OK ] Mounted Kernel Debug File System. vm-test-run-hermes-remote> server # [ 35.703145] microvm@hermes-alice[927]: [ OK ] Mounted Kernel Trace File System. vm-test-run-hermes-remote> server # [ 35.709389] microvm@hermes-alice[927]: [ OK ] Finished Load Kernel Module configfs. vm-test-run-hermes-remote> server # [ 35.717203] microvm@hermes-alice[927]: [ OK ] Mounted FUSE Control File System. vm-test-run-hermes-remote> server # [ 35.732270] microvm@hermes-alice[927]: Mounting Kernel Configuration File System... vm-test-run-hermes-remote> server # [ 35.741299] microvm@hermes-alice[927]: Starting Create SUID/SGID Wrappers... vm-test-run-hermes-remote> server # [ 35.931084] microvm@hermes-alice[927]: [ OK ] Started Journal Service. vm-test-run-hermes-remote> server # [ 35.998806] microvm@hermes-alice[927]: [ OK ] Finished Remount Root and Kernel File Systems. vm-test-run-hermes-remote> server # [ 36.012076] microvm@hermes-alice[927]: [ OK ] Listening on Disk Image Download Service Socket. vm-test-run-hermes-remote> server # [ 36.017045] microvm@hermes-alice[927]: [ OK ] Reached target Socket Units. vm-test-run-hermes-remote> server # [ 36.020754] microvm@hermes-alice[927]: [ OK ] Reached target Basic System. vm-test-run-hermes-remote> server # [ 36.041635] microvm@hermes-alice[927]: Starting Hermes python venv (pip-writable)... vm-test-run-hermes-remote> server # [ 36.104261] microvm@hermes-alice[927]: Starting Logrotate configuration check... vm-test-run-hermes-remote> server # [ 36.144399] microvm@hermes-alice[927]: Starting Post-Boot Actions... vm-test-run-hermes-remote> server # [ 36.217116] microvm@hermes-alice[927]: [ OK ] Started Reset console on configuration changes. vm-test-run-hermes-remote> server # [ 36.270043] microvm@hermes-alice[927]: Starting Flush Journal to Persistent Storage... vm-test-run-hermes-remote> server # [ 36.329269] microvm@hermes-alice[927]: Starting Load/Save OS Random Seed... vm-test-run-hermes-remote> server # [ 36.348084] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44436). vm-test-run-hermes-remote> server # [ 36.384608] microvm@hermes-alice[927]: Starting Network Time Synchronization... vm-test-run-hermes-remote> server # [ 36.415366] socat[1134]: 2026/09/15 21:02:41 socat[1134] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 36.420446] systemd[1]: hermes-dashboard-fwd-alice@9-12290-127.0.0.1:22901-127.0.0.1:44436.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 36.423316] systemd[1]: hermes-dashboard-fwd-alice@9-12290-127.0.0.1:22901-127.0.0.1:44436.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 36.533915] microvm@hermes-alice[927]: [ OK ] Finished Coldplug All udev Devices. vm-test-run-hermes-remote> server # [ 36.554274] microvm@hermes-alice[927]: [ OK ] Mounted Kernel Configuration File System. vm-test-run-hermes-remote> server # [ 36.648760] microvm@hermes-alice[927]: [ OK ] Finished Create Static Device Nodes in /dev gracefully. vm-test-run-hermes-remote> server # [ 36.730333] microvm@hermes-alice[927]: Starting Create Static Device Nodes in /dev... vm-test-run-hermes-remote> server # [ 36.809571] microvm@hermes-alice[927]: [ OK ] Finished Post-Boot Actions. vm-test-run-hermes-remote> server # [ 36.842324] microvm@hermes-alice[927]: [ OK ] Finished Load/Save OS Random Seed. vm-test-run-hermes-remote> server # [ 36.875315] microvm@hermes-alice[927]: [ OK ] Finished Logrotate configuration check. vm-test-run-hermes-remote> server # [ 36.881690] microvm@hermes-alice[927]: [ OK ] Finished Flush Journal to Persistent Storage. vm-test-run-hermes-remote> server # [ 36.916431] microvm@hermes-alice[927]: Starting Save Transient machine-id to Disk... vm-test-run-hermes-remote> server # [ 36.970559] microvm@hermes-alice[927]: Starting Create System Files and Directories... vm-test-run-hermes-remote> server # [ 37.468531] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44440). vm-test-run-hermes-remote> server # [ 37.512813] socat[1138]: 2026/09/15 21:02:42 socat[1138] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 37.519568] systemd[1]: hermes-dashboard-fwd-alice@10-4099-127.0.0.1:22901-127.0.0.1:44440.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 37.521301] systemd[1]: hermes-dashboard-fwd-alice@10-4099-127.0.0.1:22901-127.0.0.1:44440.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 37.588365] microvm@hermes-alice[927]: [ OK ] Finished Save Transient machine-id to Disk. vm-test-run-hermes-remote> server # [ 37.668843] microvm@hermes-alice[927]: [ OK ] Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-hermes-remote> server # [ 37.855279] microvm@hermes-alice[927]: [ OK ] Finished Create Static Device Nodes in /dev. vm-test-run-hermes-remote> server # [ 37.907428] microvm@hermes-alice[927]: Starting Rule-based Manager for Device Events and Files... vm-test-run-hermes-remote> server # [ 38.008621] microvm@hermes-alice[927]: [ OK ] Finished Create System Files and Directories. vm-test-run-hermes-remote> server # [ 38.048983] microvm@hermes-alice[927]: Starting D-Bus System Message Bus... vm-test-run-hermes-remote> server # [ 38.109409] microvm@hermes-alice[927]: Starting Import lastlog data into lastlog2 database... vm-test-run-hermes-remote> server # [ 38.130206] microvm@hermes-alice[927]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-hermes-remote> server # [ 38.144569] microvm@hermes-alice[927]: Starting Rebuild Journal Catalog... vm-test-run-hermes-remote> server # [ 38.239675] microvm@hermes-alice[927]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-hermes-remote> server # [ 38.344081] microvm@hermes-alice[927]: [ OK ] Started Network Name Resolution. vm-test-run-hermes-remote> server # [ 38.563704] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44448). vm-test-run-hermes-remote> server # [ 38.600046] socat[1143]: 2026/09/15 21:02:43 socat[1143] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 38.606197] systemd[1]: hermes-dashboard-fwd-alice@11-12291-127.0.0.1:22901-127.0.0.1:44448.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 38.609606] systemd[1]: hermes-dashboard-fwd-alice@11-12291-127.0.0.1:22901-127.0.0.1:44448.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 38.689246] microvm@hermes-alice[927]: [ OK ] Started Network Time Synchronization. vm-test-run-hermes-remote> server # [ 38.697169] microvm@hermes-alice[927]: [ OK ] Reached target System Time Set. vm-test-run-hermes-remote> server # [ 38.709492] microvm@hermes-alice[927]: [ OK ] Started Discard unused filesystem blocks once a week. vm-test-run-hermes-remote> server # [ 38.713806] microvm@hermes-alice[927]: [ OK ] Started logrotate.timer. vm-test-run-hermes-remote> server # [ 38.717845] microvm@hermes-alice[927]: [ OK ] Reached target Timer Units. vm-test-run-hermes-remote> server # [ 38.758034] microvm@hermes-alice[927]: [ OK ] Finished Record System Boot/Shutdown in UTMP. vm-test-run-hermes-remote> server # [ 38.948647] microvm@hermes-alice[927]: [ OK ] Started Name Service Cache Daemon (nsncd). vm-test-run-hermes-remote> server # [ 38.956228] microvm@hermes-alice[927]: [ OK ] Finished Import lastlog data into lastlog2 database. vm-test-run-hermes-remote> server # [ 38.966246] microvm@hermes-alice[927]: [ OK ] Reached target Host and Network Name Lookups. vm-test-run-hermes-remote> server # [ 38.972703] microvm@hermes-alice[927]: [ OK ] Reached target User and Group Name Lookups. vm-test-run-hermes-remote> server # [ 38.986832] microvm@hermes-alice[927]: Starting User Login Management... vm-test-run-hermes-remote> server # [ 39.068561] microvm@hermes-alice[927]: [ OK ] Started D-Bus System Message Bus. vm-test-run-hermes-remote> server # [ 39.655184] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44454). vm-test-run-hermes-remote> server # [ 39.698342] socat[1147]: 2026/09/15 21:02:44 socat[1147] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 39.703537] systemd[1]: hermes-dashboard-fwd-alice@12-4100-127.0.0.1:22901-127.0.0.1:44454.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 39.706465] systemd[1]: hermes-dashboard-fwd-alice@12-4100-127.0.0.1:22901-127.0.0.1:44454.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 39.922297] microvm@hermes-alice[927]: [ OK ] Started Rule-based Manager for Device Events and Files. vm-test-run-hermes-remote> server # [ 39.942070] microvm@hermes-alice[927]: Starting Network Management... vm-test-run-hermes-remote> server # [ 40.711514] microvm@hermes-alice[927]: Starting Virtual Console Setup... vm-test-run-hermes-remote> server # [ 40.724373] microvm@hermes-alice[927]: [ OK ] Started User Login Management. vm-test-run-hermes-remote> server # [ 40.752411] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44466). vm-test-run-hermes-remote> server # [ 40.803150] socat[1151]: 2026/09/15 21:02:45 socat[1151] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 40.806598] systemd[1]: hermes-dashboard-fwd-alice@13-4-127.0.0.1:22901-127.0.0.1:44466.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 40.812359] systemd[1]: hermes-dashboard-fwd-alice@13-4-127.0.0.1:22901-127.0.0.1:44466.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 40.849390] microvm@hermes-alice[927]: Starting linger-users.service... vm-test-run-hermes-remote> server # [ 41.118761] microvm@hermes-alice[927]: [ OK ] Finished Create SUID/SGID Wrappers. vm-test-run-hermes-remote> server # [ 41.210236] microvm@hermes-alice[927]: [ OK ] Finished linger-users.service. vm-test-run-hermes-remote> server # [ 41.574817] microvm@hermes-alice[927]: [ OK ] Finished Rebuild Journal Catalog. vm-test-run-hermes-remote> server # [ 41.601346] microvm@hermes-alice[927]: Starting Update is Completed... vm-test-run-hermes-remote> server # [ 41.852050] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44482). vm-test-run-hermes-remote> server # [ 41.889801] socat[1156]: 2026/09/15 21:02:47 socat[1156] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 41.893569] systemd[1]: hermes-dashboard-fwd-alice@14-12292-127.0.0.1:22901-127.0.0.1:44482.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 41.897106] systemd[1]: hermes-dashboard-fwd-alice@14-12292-127.0.0.1:22901-127.0.0.1:44482.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 42.213419] microvm@hermes-alice[927]: [ OK ] Finished Update is Completed. vm-test-run-hermes-remote> server # [ 42.260400] microvm@hermes-alice[927]: [ OK ] Finished Virtual Console Setup. vm-test-run-hermes-remote> server # [ 42.764281] microvm@hermes-alice[927]: [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-hermes-remote> server # [ 42.941389] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44496). vm-test-run-hermes-remote> server # [ 42.989337] socat[1160]: 2026/09/15 21:02:48 socat[1160] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 42.991375] systemd[1]: hermes-dashboard-fwd-alice@15-12293-127.0.0.1:22901-127.0.0.1:44496.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 42.994549] systemd[1]: hermes-dashboard-fwd-alice@15-12293-127.0.0.1:22901-127.0.0.1:44496.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 43.274343] microvm@hermes-alice[927]: [ OK ] Started Network Management. vm-test-run-hermes-remote> server # [ 43.278164] microvm@hermes-alice[927]: [ OK ] Reached target Network. vm-test-run-hermes-remote> server # [ 43.282474] microvm@hermes-alice[927]: [ OK ] Reached target Network is Online. vm-test-run-hermes-remote> server # [ 43.297038] microvm@hermes-alice[927]: [ OK ] Started SimpleX Chat daemon for the hermes gateway. vm-test-run-hermes-remote> server # [ 43.332514] microvm@hermes-alice[927]: Starting Publish the SimpleX address of the hermes profile... vm-test-run-hermes-remote> server # [ 43.381928] microvm@hermes-alice[927]: Starting Enable Persistent Storage in systemd-networkd... vm-test-run-hermes-remote> server # [ 43.401761] microvm@hermes-alice[927]: Starting Permit User Sessions... vm-test-run-hermes-remote> server # [ 43.716295] microvm@hermes-alice[927]: [ OK ] Finished Permit User Sessions. vm-test-run-hermes-remote> server # [ 43.724524] microvm@hermes-alice[927]: [ OK ] Finished Enable Persistent Storage in systemd-networkd. vm-test-run-hermes-remote> server # [ 43.744398] microvm@hermes-alice[927]: [ OK ] Started Getty on tty1. vm-test-run-hermes-remote> server # [ 43.809520] microvm@hermes-alice[927]: [ OK ] Started Serial Getty on ttyS0. vm-test-run-hermes-remote> server # [ 43.841241] microvm@hermes-alice[927]: [ OK ] Reached target Login Prompts. vm-test-run-hermes-remote> server # [ 44.033149] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44538). vm-test-run-hermes-remote> server # [ 44.060114] socat[1164]: 2026/09/15 21:02:49 socat[1164] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 44.063823] systemd[1]: hermes-dashboard-fwd-alice@16-12294-127.0.0.1:22901-127.0.0.1:44538.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 44.068373] systemd[1]: hermes-dashboard-fwd-alice@16-12294-127.0.0.1:22901-127.0.0.1:44538.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 45.113686] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44546). vm-test-run-hermes-remote> server # [ 45.145429] socat[1168]: 2026/09/15 21:02:50 socat[1168] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 45.147990] systemd[1]: hermes-dashboard-fwd-alice@17-12295-127.0.0.1:22901-127.0.0.1:44546.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 45.150539] systemd[1]: hermes-dashboard-fwd-alice@17-12295-127.0.0.1:22901-127.0.0.1:44546.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 46.195593] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44554). vm-test-run-hermes-remote> server # [ 46.223171] socat[1172]: 2026/09/15 21:02:51 socat[1172] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 46.224687] systemd[1]: hermes-dashboard-fwd-alice@18-8196-127.0.0.1:22901-127.0.0.1:44554.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 46.227213] systemd[1]: hermes-dashboard-fwd-alice@18-8196-127.0.0.1:22901-127.0.0.1:44554.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 47.272186] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44568). vm-test-run-hermes-remote> server # [ 47.308527] socat[1176]: 2026/09/15 21:02:52 socat[1176] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 47.311209] systemd[1]: hermes-dashboard-fwd-alice@19-5-127.0.0.1:22901-127.0.0.1:44568.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 47.313898] systemd[1]: hermes-dashboard-fwd-alice@19-5-127.0.0.1:22901-127.0.0.1:44568.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 48.355576] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44576). vm-test-run-hermes-remote> server # [ 48.385615] socat[1180]: 2026/09/15 21:02:53 socat[1180] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 48.388900] systemd[1]: hermes-dashboard-fwd-alice@20-6-127.0.0.1:22901-127.0.0.1:44576.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 48.390094] systemd[1]: hermes-dashboard-fwd-alice@20-6-127.0.0.1:22901-127.0.0.1:44576.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 49.438106] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44578). vm-test-run-hermes-remote> server # [ 49.477511] socat[1184]: 2026/09/15 21:02:54 socat[1184] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 49.481562] systemd[1]: hermes-dashboard-fwd-alice@21-4101-127.0.0.1:22901-127.0.0.1:44578.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 49.482522] systemd[1]: hermes-dashboard-fwd-alice@21-4101-127.0.0.1:22901-127.0.0.1:44578.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 50.678312] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44582). vm-test-run-hermes-remote> server # [ 50.901600] socat[1188]: 2026/09/15 21:02:56 socat[1188] E connect(5, AF=40 cid:735577804 port:9119, 16): Connection reset by peer vm-test-run-hermes-remote> server # [ 50.904231] systemd[1]: hermes-dashboard-fwd-alice@22-7-127.0.0.1:22901-127.0.0.1:44582.service: Main process exited, code=exited, status=1/FAILURE vm-test-run-hermes-remote> server # [ 50.905110] systemd[1]: hermes-dashboard-fwd-alice@22-7-127.0.0.1:22901-127.0.0.1:44582.service: Failed with result 'exit-code'. vm-test-run-hermes-remote> server # [ 50.995354] microvm@hermes-alice[927]: +q6E616D65 vm-test-run-hermes-remote> server # [ 50.996348] microvm@hermes-alice[927]: vm-test-run-hermes-remote> server # [ 50.997745] microvm@hermes-alice[927]: <<< Welcome to NixOS 26.11pre-git (x86_64) - ttyS0 >>> vm-test-run-hermes-remote> server # [ 50.998640] microvm@hermes-alice[927]: vm-test-run-hermes-remote> server # [ 50.999413] microvm@hermes-alice[927]: Run 'nixos-help' for the NixOS manual. vm-test-run-hermes-remote> server # [ 51.000083] microvm@hermes-alice[927]: vm-test-run-hermes-remote> server # [ 51.952276] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:44598). vm-test-run-hermes-remote> server # [ 52.485714] systemd[1]: hermes-dashboard-fwd-alice@23-8-127.0.0.1:22901-127.0.0.1:44598.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 53.531683] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46670). vm-test-run-hermes-remote> server # [ 54.065355] systemd[1]: hermes-dashboard-fwd-alice@24-9-127.0.0.1:22901-127.0.0.1:46670.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 55.118341] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46684). vm-test-run-hermes-remote> server # [ 55.660111] systemd[1]: hermes-dashboard-fwd-alice@25-8197-127.0.0.1:22901-127.0.0.1:46684.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 56.711664] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46688). vm-test-run-hermes-remote> server # [ 57.250167] systemd[1]: hermes-dashboard-fwd-alice@26-12296-127.0.0.1:22901-127.0.0.1:46688.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 58.294683] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46702). vm-test-run-hermes-remote> server # [ 58.832694] systemd[1]: hermes-dashboard-fwd-alice@27-10-127.0.0.1:22901-127.0.0.1:46702.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 59.879865] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46712). vm-test-run-hermes-remote> server # [ 60.419324] systemd[1]: hermes-dashboard-fwd-alice@28-8198-127.0.0.1:22901-127.0.0.1:46712.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 61.476474] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46716). vm-test-run-hermes-remote> server # [ 62.016229] systemd[1]: hermes-dashboard-fwd-alice@29-11-127.0.0.1:22901-127.0.0.1:46716.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 63.062860] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56862). vm-test-run-hermes-remote> server # [ 63.613323] systemd[1]: hermes-dashboard-fwd-alice@30-4102-127.0.0.1:22901-127.0.0.1:56862.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 64.661586] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56868). vm-test-run-hermes-remote> server # [ 65.196638] systemd[1]: hermes-dashboard-fwd-alice@31-12297-127.0.0.1:22901-127.0.0.1:56868.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 66.244207] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56870). vm-test-run-hermes-remote> server # [ 66.781139] systemd[1]: hermes-dashboard-fwd-alice@32-12-127.0.0.1:22901-127.0.0.1:56870.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 67.828357] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56874). vm-test-run-hermes-remote> server # [ 68.366384] systemd[1]: hermes-dashboard-fwd-alice@33-13-127.0.0.1:22901-127.0.0.1:56874.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 69.413701] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56886). vm-test-run-hermes-remote> server # [ 69.949743] systemd[1]: hermes-dashboard-fwd-alice@34-8199-127.0.0.1:22901-127.0.0.1:56886.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 71.185939] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56898). vm-test-run-hermes-remote> server # [ 71.835352] systemd[1]: hermes-dashboard-fwd-alice@35-14-127.0.0.1:22901-127.0.0.1:56898.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 72.884283] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:56902). vm-test-run-hermes-remote> server # [ 73.530062] systemd[1]: hermes-dashboard-fwd-alice@36-8200-127.0.0.1:22901-127.0.0.1:56902.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 74.605081] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60916). vm-test-run-hermes-remote> server # [ 75.141658] systemd[1]: hermes-dashboard-fwd-alice@37-12298-127.0.0.1:22901-127.0.0.1:60916.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 76.190409] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:60930). vm-test-run-hermes-remote> client: (finished: waiting for success: /nix/store/wyhhly9yani8vcjx2qvmflbn96s1568m-curl-8.21.0-bin/bin/curl -sf -o /dev/null http://127.0.0.1:23901/api/status, in 72.68 seconds) vm-test-run-hermes-remote> server # [ 90.189247] systemd[1]: hermes-dashboard-fwd-alice@38-12299-127.0.0.1:22901-127.0.0.1:60930.service: Deactivated successfully. vm-test-run-hermes-remote> (finished: subtest: the guest dashboard answers /api/status through the tunnel, in 72.68 seconds) vm-test-run-hermes-remote> subtest: the guest dashboard is not exposed off the server vm-test-run-hermes-remote> client: must fail: /nix/store/wyhhly9yani8vcjx2qvmflbn96s1568m-curl-8.21.0-bin/bin/curl -s --max-time 5 -o /dev/null http://server:22901/api/status vm-test-run-hermes-remote> client: (finished: must fail: /nix/store/wyhhly9yani8vcjx2qvmflbn96s1568m-curl-8.21.0-bin/bin/curl -s --max-time 5 -o /dev/null http://server:22901/api/status, in 5.03 seconds) vm-test-run-hermes-remote> (finished: subtest: the guest dashboard is not exposed off the server, in 5.03 seconds) vm-test-run-hermes-remote> subtest: the dashboard token gates /api/sessions through the tunnel vm-test-run-hermes-remote> client: must succeed: /nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3 /nix/store/ix6jna8albm82cam3pmfsqc8jwr7hhxf-hermes-remote-probe.py http://127.0.0.1:23901 a9a26cb7dae14a889a59f4b4006e30b6008621e24d04c17df103a0ceacb45a5a vm-test-run-hermes-remote> server # [ 95.636455] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46926). vm-test-run-hermes-remote> server # [ 95.720101] systemd[1]: hermes-dashboard-fwd-alice@39-15-127.0.0.1:22901-127.0.0.1:46926.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 95.723773] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46940). vm-test-run-hermes-remote> server # [ 95.764547] systemd[1]: hermes-dashboard-fwd-alice@40-16-127.0.0.1:22901-127.0.0.1:46940.service: Deactivated successfully. vm-test-run-hermes-remote> server # [ 95.768210] systemd[1]: Started dashboard vsock forward for hermes-alice (127.0.0.1:46956). vm-test-run-hermes-remote> server # [ 95.807168] systemd[1]: hermes-dashboard-fwd-alice@41-17-127.0.0.1:22901-127.0.0.1:46956.service: Deactivated successfully. vm-test-run-hermes-remote> client: (finished: must succeed: /nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3 /nix/store/ix6jna8albm82cam3pmfsqc8jwr7hhxf-hermes-remote-probe.py http://127.0.0.1:23901 a9a26cb7dae14a889a59f4b4006e30b6008621e24d04c17df103a0ceacb45a5a, in 0.60 seconds) vm-test-run-hermes-remote> ok: /api/sessions answers 200 with the token and 401 without it vm-test-run-hermes-remote> (finished: subtest: the dashboard token gates /api/sessions through the tunnel, in 0.60 seconds) vm-test-run-hermes-remote> (finished: run the VM test script, in 96.78 seconds) vm-test-run-hermes-remote> test script finished in 96.85s vm-test-run-hermes-remote> cleanup vm-test-run-hermes-remote> kill QemuMachine (pid 48) vm-test-run-hermes-remote> client # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3.14) vm-test-run-hermes-remote> kill QemuMachine (pid 47) vm-test-run-hermes-remote> server # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3.14) vm-test-run-hermes-remote> (finished: cleanup, in 0.66 seconds) post-build step Upload to niks3: ok time=2026-09-15T21:03:41.940Z level=INFO msg="Uploading 0 paths to 127.0.0.1 (1 already cached)" time=2026-09-15T21:03:42.269Z level=INFO msg="Uploading 1 narinfos" time=2026-09-15T21:03:42.723Z level=INFO msg="Upload complete. (841ms)"